Warning: That file was not part of the compilation database. It may have many parsing errors.

1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2/*
3 * <linux/gpio.h> - userspace ABI for the GPIO character devices
4 *
5 * Copyright (C) 2016 Linus Walleij
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published by
9 * the Free Software Foundation.
10 */
11#ifndef _GPIO_H_
12#define _GPIO_H_
13
14#include <linux/ioctl.h>
15#include <linux/types.h>
16
17/**
18 * struct gpiochip_info - Information about a certain GPIO chip
19 * @name: the Linux kernel name of this GPIO chip
20 * @label: a functional name for this GPIO chip, such as a product
21 * number, may be NULL
22 * @lines: number of GPIO lines on this chip
23 */
24struct gpiochip_info {
25 char name[32];
26 char label[32];
27 __u32 lines;
28};
29
30/* Informational flags */
31#define GPIOLINE_FLAG_KERNEL (1UL << 0) /* Line used by the kernel */
32#define GPIOLINE_FLAG_IS_OUT (1UL << 1)
33#define GPIOLINE_FLAG_ACTIVE_LOW (1UL << 2)
34#define GPIOLINE_FLAG_OPEN_DRAIN (1UL << 3)
35#define GPIOLINE_FLAG_OPEN_SOURCE (1UL << 4)
36
37/**
38 * struct gpioline_info - Information about a certain GPIO line
39 * @line_offset: the local offset on this GPIO device, fill this in when
40 * requesting the line information from the kernel
41 * @flags: various flags for this line
42 * @name: the name of this GPIO line, such as the output pin of the line on the
43 * chip, a rail or a pin header name on a board, as specified by the gpio
44 * chip, may be NULL
45 * @consumer: a functional name for the consumer of this GPIO line as set by
46 * whatever is using it, will be NULL if there is no current user but may
47 * also be NULL if the consumer doesn't set this up
48 */
49struct gpioline_info {
50 __u32 line_offset;
51 __u32 flags;
52 char name[32];
53 char consumer[32];
54};
55
56/* Maximum number of requested handles */
57#define GPIOHANDLES_MAX 64
58
59/* Linerequest flags */
60#define GPIOHANDLE_REQUEST_INPUT (1UL << 0)
61#define GPIOHANDLE_REQUEST_OUTPUT (1UL << 1)
62#define GPIOHANDLE_REQUEST_ACTIVE_LOW (1UL << 2)
63#define GPIOHANDLE_REQUEST_OPEN_DRAIN (1UL << 3)
64#define GPIOHANDLE_REQUEST_OPEN_SOURCE (1UL << 4)
65
66/**
67 * struct gpiohandle_request - Information about a GPIO handle request
68 * @lineoffsets: an array desired lines, specified by offset index for the
69 * associated GPIO device
70 * @flags: desired flags for the desired GPIO lines, such as
71 * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed
72 * together. Note that even if multiple lines are requested, the same flags
73 * must be applicable to all of them, if you want lines with individual
74 * flags set, request them one by one. It is possible to select
75 * a batch of input or output lines, but they must all have the same
76 * characteristics, i.e. all inputs or all outputs, all active low etc
77 * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set for a requested
78 * line, this specifies the default output value, should be 0 (low) or
79 * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high)
80 * @consumer_label: a desired consumer label for the selected GPIO line(s)
81 * such as "my-bitbanged-relay"
82 * @lines: number of lines requested in this request, i.e. the number of
83 * valid fields in the above arrays, set to 1 to request a single line
84 * @fd: if successful this field will contain a valid anonymous file handle
85 * after a GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value
86 * means error
87 */
88struct gpiohandle_request {
89 __u32 lineoffsets[GPIOHANDLES_MAX];
90 __u32 flags;
91 __u8 default_values[GPIOHANDLES_MAX];
92 char consumer_label[32];
93 __u32 lines;
94 int fd;
95};
96
97/**
98 * struct gpiohandle_data - Information of values on a GPIO handle
99 * @values: when getting the state of lines this contains the current
100 * state of a line, when setting the state of lines these should contain
101 * the desired target state
102 */
103struct gpiohandle_data {
104 __u8 values[GPIOHANDLES_MAX];
105};
106
107#define GPIOHANDLE_GET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x08, struct gpiohandle_data)
108#define GPIOHANDLE_SET_LINE_VALUES_IOCTL _IOWR(0xB4, 0x09, struct gpiohandle_data)
109
110/* Eventrequest flags */
111#define GPIOEVENT_REQUEST_RISING_EDGE (1UL << 0)
112#define GPIOEVENT_REQUEST_FALLING_EDGE (1UL << 1)
113#define GPIOEVENT_REQUEST_BOTH_EDGES ((1UL << 0) | (1UL << 1))
114
115/**
116 * struct gpioevent_request - Information about a GPIO event request
117 * @lineoffset: the desired line to subscribe to events from, specified by
118 * offset index for the associated GPIO device
119 * @handleflags: desired handle flags for the desired GPIO line, such as
120 * GPIOHANDLE_REQUEST_ACTIVE_LOW or GPIOHANDLE_REQUEST_OPEN_DRAIN
121 * @eventflags: desired flags for the desired GPIO event line, such as
122 * GPIOEVENT_REQUEST_RISING_EDGE or GPIOEVENT_REQUEST_FALLING_EDGE
123 * @consumer_label: a desired consumer label for the selected GPIO line(s)
124 * such as "my-listener"
125 * @fd: if successful this field will contain a valid anonymous file handle
126 * after a GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value
127 * means error
128 */
129struct gpioevent_request {
130 __u32 lineoffset;
131 __u32 handleflags;
132 __u32 eventflags;
133 char consumer_label[32];
134 int fd;
135};
136
137/**
138 * GPIO event types
139 */
140#define GPIOEVENT_EVENT_RISING_EDGE 0x01
141#define GPIOEVENT_EVENT_FALLING_EDGE 0x02
142
143/**
144 * struct gpioevent_data - The actual event being pushed to userspace
145 * @timestamp: best estimate of time of event occurrence, in nanoseconds
146 * @id: event identifier
147 */
148struct gpioevent_data {
149 __u64 timestamp;
150 __u32 id;
151};
152
153#define GPIO_GET_CHIPINFO_IOCTL _IOR(0xB4, 0x01, struct gpiochip_info)
154#define GPIO_GET_LINEINFO_IOCTL _IOWR(0xB4, 0x02, struct gpioline_info)
155#define GPIO_GET_LINEHANDLE_IOCTL _IOWR(0xB4, 0x03, struct gpiohandle_request)
156#define GPIO_GET_LINEEVENT_IOCTL _IOWR(0xB4, 0x04, struct gpioevent_request)
157
158#endif /* _GPIO_H_ */
159

Warning: That file was not part of the compilation database. It may have many parsing errors.