1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * OMAP2+ Clock Management prototypes
4 *
5 * Copyright (C) 2007-2009, 2012 Texas Instruments, Inc.
6 * Copyright (C) 2007-2009 Nokia Corporation
7 *
8 * Written by Paul Walmsley
9 */
10#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
11#define __ARCH_ASM_MACH_OMAP2_CM_H
12
13/*
14 * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
15 * PRCM to request that a module exit the inactive state in the case of
16 * OMAP2 & 3.
17 * In the case of OMAP4 this is the max duration in microseconds for the
18 * module to reach the functionnal state from an inactive state.
19 */
20#define MAX_MODULE_READY_TIME 2000
21
22# ifndef __ASSEMBLER__
23#include <linux/clk/ti.h>
24
25#include "prcm-common.h"
26
27extern struct omap_domain_base cm_base;
28extern struct omap_domain_base cm2_base;
29# endif
30
31/*
32 * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
33 * the PRCM to request that a module enter the inactive state in the
34 * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
35 * in microseconds for the module to reach the inactive state from
36 * a functional state.
37 * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
38 * kernel init.
39 */
40#define MAX_MODULE_DISABLE_TIME 5000
41
42# ifndef __ASSEMBLER__
43
44/**
45 * struct cm_ll_data - fn ptrs to per-SoC CM function implementations
46 * @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
47 * @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
48 * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl
49 * @module_enable: ptr to the SoC CM-specific module_enable impl
50 * @module_disable: ptr to the SoC CM-specific module_disable impl
51 * @xlate_clkctrl: ptr to the SoC CM-specific clkctrl xlate addr impl
52 */
53struct cm_ll_data {
54 int (*split_idlest_reg)(struct clk_omap_reg *idlest_reg, s16 *prcm_inst,
55 u8 *idlest_reg_id);
56 int (*wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
57 u8 idlest_shift);
58 int (*wait_module_idle)(u8 part, s16 prcm_mod, u16 idlest_reg,
59 u8 idlest_shift);
60 void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
61 void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs);
62 u32 (*xlate_clkctrl)(u8 part, u16 inst, u16 clkctrl_offs);
63};
64
65extern int cm_split_idlest_reg(struct clk_omap_reg *idlest_reg, s16 *prcm_inst,
66 u8 *idlest_reg_id);
67int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
68 u8 idlest_shift);
69int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
70 u8 idlest_shift);
71int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
72int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
73u32 omap_cm_xlate_clkctrl(u8 part, u16 inst, u16 clkctrl_offs);
74extern int cm_register(const struct cm_ll_data *cld);
75extern int cm_unregister(const struct cm_ll_data *cld);
76int omap_cm_init(void);
77int omap2_cm_base_init(void);
78
79# endif
80
81#endif
82

source code of linux/arch/arm/mach-omap2/cm.h