1 | // SPDX-License-Identifier: GPL-2.0-only |
2 | /* |
3 | * AMD Cryptographic Coprocessor (CCP) driver |
4 | * |
5 | * Copyright (C) 2013-2019 Advanced Micro Devices, Inc. |
6 | * |
7 | * Author: Tom Lendacky <thomas.lendacky@amd.com> |
8 | * Author: Gary R Hook <gary.hook@amd.com> |
9 | */ |
10 | |
11 | #include <linux/dma-mapping.h> |
12 | #include <linux/module.h> |
13 | #include <linux/kernel.h> |
14 | #include <linux/interrupt.h> |
15 | #include <crypto/scatterwalk.h> |
16 | #include <crypto/des.h> |
17 | #include <linux/ccp.h> |
18 | |
19 | #include "ccp-dev.h" |
20 | |
21 | /* SHA initial context values */ |
22 | static const __be32 ccp_sha1_init[SHA1_DIGEST_SIZE / sizeof(__be32)] = { |
23 | cpu_to_be32(SHA1_H0), cpu_to_be32(SHA1_H1), |
24 | cpu_to_be32(SHA1_H2), cpu_to_be32(SHA1_H3), |
25 | cpu_to_be32(SHA1_H4), |
26 | }; |
27 | |
28 | static const __be32 ccp_sha224_init[SHA256_DIGEST_SIZE / sizeof(__be32)] = { |
29 | cpu_to_be32(SHA224_H0), cpu_to_be32(SHA224_H1), |
30 | cpu_to_be32(SHA224_H2), cpu_to_be32(SHA224_H3), |
31 | cpu_to_be32(SHA224_H4), cpu_to_be32(SHA224_H5), |
32 | cpu_to_be32(SHA224_H6), cpu_to_be32(SHA224_H7), |
33 | }; |
34 | |
35 | static const __be32 ccp_sha256_init[SHA256_DIGEST_SIZE / sizeof(__be32)] = { |
36 | cpu_to_be32(SHA256_H0), cpu_to_be32(SHA256_H1), |
37 | cpu_to_be32(SHA256_H2), cpu_to_be32(SHA256_H3), |
38 | cpu_to_be32(SHA256_H4), cpu_to_be32(SHA256_H5), |
39 | cpu_to_be32(SHA256_H6), cpu_to_be32(SHA256_H7), |
40 | }; |
41 | |
42 | static const __be64 ccp_sha384_init[SHA512_DIGEST_SIZE / sizeof(__be64)] = { |
43 | cpu_to_be64(SHA384_H0), cpu_to_be64(SHA384_H1), |
44 | cpu_to_be64(SHA384_H2), cpu_to_be64(SHA384_H3), |
45 | cpu_to_be64(SHA384_H4), cpu_to_be64(SHA384_H5), |
46 | cpu_to_be64(SHA384_H6), cpu_to_be64(SHA384_H7), |
47 | }; |
48 | |
49 | static const __be64 ccp_sha512_init[SHA512_DIGEST_SIZE / sizeof(__be64)] = { |
50 | cpu_to_be64(SHA512_H0), cpu_to_be64(SHA512_H1), |
51 | cpu_to_be64(SHA512_H2), cpu_to_be64(SHA512_H3), |
52 | cpu_to_be64(SHA512_H4), cpu_to_be64(SHA512_H5), |
53 | cpu_to_be64(SHA512_H6), cpu_to_be64(SHA512_H7), |
54 | }; |
55 | |
56 | #define CCP_NEW_JOBID(ccp) ((ccp->vdata->version == CCP_VERSION(3, 0)) ? \ |
57 | ccp_gen_jobid(ccp) : 0) |
58 | |
59 | static u32 ccp_gen_jobid(struct ccp_device *ccp) |
60 | { |
61 | return atomic_inc_return(v: &ccp->current_id) & CCP_JOBID_MASK; |
62 | } |
63 | |
64 | static void ccp_sg_free(struct ccp_sg_workarea *wa) |
65 | { |
66 | if (wa->dma_count) |
67 | dma_unmap_sg(wa->dma_dev, wa->dma_sg_head, wa->nents, wa->dma_dir); |
68 | |
69 | wa->dma_count = 0; |
70 | } |
71 | |
72 | static int ccp_init_sg_workarea(struct ccp_sg_workarea *wa, struct device *dev, |
73 | struct scatterlist *sg, u64 len, |
74 | enum dma_data_direction dma_dir) |
75 | { |
76 | memset(wa, 0, sizeof(*wa)); |
77 | |
78 | wa->sg = sg; |
79 | if (!sg) |
80 | return 0; |
81 | |
82 | wa->nents = sg_nents_for_len(sg, len); |
83 | if (wa->nents < 0) |
84 | return wa->nents; |
85 | |
86 | wa->bytes_left = len; |
87 | wa->sg_used = 0; |
88 | |
89 | if (len == 0) |
90 | return 0; |
91 | |
92 | if (dma_dir == DMA_NONE) |
93 | return 0; |
94 | |
95 | wa->dma_sg = sg; |
96 | wa->dma_sg_head = sg; |
97 | wa->dma_dev = dev; |
98 | wa->dma_dir = dma_dir; |
99 | wa->dma_count = dma_map_sg(dev, sg, wa->nents, dma_dir); |
100 | if (!wa->dma_count) |
101 | return -ENOMEM; |
102 | |
103 | return 0; |
104 | } |
105 | |
106 | static void ccp_update_sg_workarea(struct ccp_sg_workarea *wa, unsigned int len) |
107 | { |
108 | unsigned int nbytes = min_t(u64, len, wa->bytes_left); |
109 | unsigned int sg_combined_len = 0; |
110 | |
111 | if (!wa->sg) |
112 | return; |
113 | |
114 | wa->sg_used += nbytes; |
115 | wa->bytes_left -= nbytes; |
116 | if (wa->sg_used == sg_dma_len(wa->dma_sg)) { |
117 | /* Advance to the next DMA scatterlist entry */ |
118 | wa->dma_sg = sg_next(wa->dma_sg); |
119 | |
120 | /* In the case that the DMA mapped scatterlist has entries |
121 | * that have been merged, the non-DMA mapped scatterlist |
122 | * must be advanced multiple times for each merged entry. |
123 | * This ensures that the current non-DMA mapped entry |
124 | * corresponds to the current DMA mapped entry. |
125 | */ |
126 | do { |
127 | sg_combined_len += wa->sg->length; |
128 | wa->sg = sg_next(wa->sg); |
129 | } while (wa->sg_used > sg_combined_len); |
130 | |
131 | wa->sg_used = 0; |
132 | } |
133 | } |
134 | |
135 | static void ccp_dm_free(struct ccp_dm_workarea *wa) |
136 | { |
137 | if (wa->length <= CCP_DMAPOOL_MAX_SIZE) { |
138 | if (wa->address) |
139 | dma_pool_free(pool: wa->dma_pool, vaddr: wa->address, |
140 | addr: wa->dma.address); |
141 | } else { |
142 | if (wa->dma.address) |
143 | dma_unmap_single(wa->dev, wa->dma.address, wa->length, |
144 | wa->dma.dir); |
145 | kfree(objp: wa->address); |
146 | } |
147 | |
148 | wa->address = NULL; |
149 | wa->dma.address = 0; |
150 | } |
151 | |
152 | static int ccp_init_dm_workarea(struct ccp_dm_workarea *wa, |
153 | struct ccp_cmd_queue *cmd_q, |
154 | unsigned int len, |
155 | enum dma_data_direction dir) |
156 | { |
157 | memset(wa, 0, sizeof(*wa)); |
158 | |
159 | if (!len) |
160 | return 0; |
161 | |
162 | wa->dev = cmd_q->ccp->dev; |
163 | wa->length = len; |
164 | |
165 | if (len <= CCP_DMAPOOL_MAX_SIZE) { |
166 | wa->dma_pool = cmd_q->dma_pool; |
167 | |
168 | wa->address = dma_pool_zalloc(pool: wa->dma_pool, GFP_KERNEL, |
169 | handle: &wa->dma.address); |
170 | if (!wa->address) |
171 | return -ENOMEM; |
172 | |
173 | wa->dma.length = CCP_DMAPOOL_MAX_SIZE; |
174 | |
175 | } else { |
176 | wa->address = kzalloc(size: len, GFP_KERNEL); |
177 | if (!wa->address) |
178 | return -ENOMEM; |
179 | |
180 | wa->dma.address = dma_map_single(wa->dev, wa->address, len, |
181 | dir); |
182 | if (dma_mapping_error(dev: wa->dev, dma_addr: wa->dma.address)) |
183 | return -ENOMEM; |
184 | |
185 | wa->dma.length = len; |
186 | } |
187 | wa->dma.dir = dir; |
188 | |
189 | return 0; |
190 | } |
191 | |
192 | static int ccp_set_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, |
193 | struct scatterlist *sg, unsigned int sg_offset, |
194 | unsigned int len) |
195 | { |
196 | WARN_ON(!wa->address); |
197 | |
198 | if (len > (wa->length - wa_offset)) |
199 | return -EINVAL; |
200 | |
201 | scatterwalk_map_and_copy(buf: wa->address + wa_offset, sg, start: sg_offset, nbytes: len, |
202 | out: 0); |
203 | return 0; |
204 | } |
205 | |
206 | static void ccp_get_dm_area(struct ccp_dm_workarea *wa, unsigned int wa_offset, |
207 | struct scatterlist *sg, unsigned int sg_offset, |
208 | unsigned int len) |
209 | { |
210 | WARN_ON(!wa->address); |
211 | |
212 | scatterwalk_map_and_copy(buf: wa->address + wa_offset, sg, start: sg_offset, nbytes: len, |
213 | out: 1); |
214 | } |
215 | |
216 | static int ccp_reverse_set_dm_area(struct ccp_dm_workarea *wa, |
217 | unsigned int wa_offset, |
218 | struct scatterlist *sg, |
219 | unsigned int sg_offset, |
220 | unsigned int len) |
221 | { |
222 | u8 *p, *q; |
223 | int rc; |
224 | |
225 | rc = ccp_set_dm_area(wa, wa_offset, sg, sg_offset, len); |
226 | if (rc) |
227 | return rc; |
228 | |
229 | p = wa->address + wa_offset; |
230 | q = p + len - 1; |
231 | while (p < q) { |
232 | *p = *p ^ *q; |
233 | *q = *p ^ *q; |
234 | *p = *p ^ *q; |
235 | p++; |
236 | q--; |
237 | } |
238 | return 0; |
239 | } |
240 | |
241 | static void ccp_reverse_get_dm_area(struct ccp_dm_workarea *wa, |
242 | unsigned int wa_offset, |
243 | struct scatterlist *sg, |
244 | unsigned int sg_offset, |
245 | unsigned int len) |
246 | { |
247 | u8 *p, *q; |
248 | |
249 | p = wa->address + wa_offset; |
250 | q = p + len - 1; |
251 | while (p < q) { |
252 | *p = *p ^ *q; |
253 | *q = *p ^ *q; |
254 | *p = *p ^ *q; |
255 | p++; |
256 | q--; |
257 | } |
258 | |
259 | ccp_get_dm_area(wa, wa_offset, sg, sg_offset, len); |
260 | } |
261 | |
262 | static void ccp_free_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q) |
263 | { |
264 | ccp_dm_free(wa: &data->dm_wa); |
265 | ccp_sg_free(wa: &data->sg_wa); |
266 | } |
267 | |
268 | static int ccp_init_data(struct ccp_data *data, struct ccp_cmd_queue *cmd_q, |
269 | struct scatterlist *sg, u64 sg_len, |
270 | unsigned int dm_len, |
271 | enum dma_data_direction dir) |
272 | { |
273 | int ret; |
274 | |
275 | memset(data, 0, sizeof(*data)); |
276 | |
277 | ret = ccp_init_sg_workarea(wa: &data->sg_wa, dev: cmd_q->ccp->dev, sg, len: sg_len, |
278 | dma_dir: dir); |
279 | if (ret) |
280 | goto e_err; |
281 | |
282 | ret = ccp_init_dm_workarea(wa: &data->dm_wa, cmd_q, len: dm_len, dir); |
283 | if (ret) |
284 | goto e_err; |
285 | |
286 | return 0; |
287 | |
288 | e_err: |
289 | ccp_free_data(data, cmd_q); |
290 | |
291 | return ret; |
292 | } |
293 | |
294 | static unsigned int ccp_queue_buf(struct ccp_data *data, unsigned int from) |
295 | { |
296 | struct ccp_sg_workarea *sg_wa = &data->sg_wa; |
297 | struct ccp_dm_workarea *dm_wa = &data->dm_wa; |
298 | unsigned int buf_count, nbytes; |
299 | |
300 | /* Clear the buffer if setting it */ |
301 | if (!from) |
302 | memset(dm_wa->address, 0, dm_wa->length); |
303 | |
304 | if (!sg_wa->sg) |
305 | return 0; |
306 | |
307 | /* Perform the copy operation |
308 | * nbytes will always be <= UINT_MAX because dm_wa->length is |
309 | * an unsigned int |
310 | */ |
311 | nbytes = min_t(u64, sg_wa->bytes_left, dm_wa->length); |
312 | scatterwalk_map_and_copy(buf: dm_wa->address, sg: sg_wa->sg, start: sg_wa->sg_used, |
313 | nbytes, out: from); |
314 | |
315 | /* Update the structures and generate the count */ |
316 | buf_count = 0; |
317 | while (sg_wa->bytes_left && (buf_count < dm_wa->length)) { |
318 | nbytes = min(sg_dma_len(sg_wa->dma_sg) - sg_wa->sg_used, |
319 | dm_wa->length - buf_count); |
320 | nbytes = min_t(u64, sg_wa->bytes_left, nbytes); |
321 | |
322 | buf_count += nbytes; |
323 | ccp_update_sg_workarea(wa: sg_wa, len: nbytes); |
324 | } |
325 | |
326 | return buf_count; |
327 | } |
328 | |
329 | static unsigned int ccp_fill_queue_buf(struct ccp_data *data) |
330 | { |
331 | return ccp_queue_buf(data, from: 0); |
332 | } |
333 | |
334 | static unsigned int ccp_empty_queue_buf(struct ccp_data *data) |
335 | { |
336 | return ccp_queue_buf(data, from: 1); |
337 | } |
338 | |
339 | static void ccp_prepare_data(struct ccp_data *src, struct ccp_data *dst, |
340 | struct ccp_op *op, unsigned int block_size, |
341 | bool blocksize_op) |
342 | { |
343 | unsigned int sg_src_len, sg_dst_len, op_len; |
344 | |
345 | /* The CCP can only DMA from/to one address each per operation. This |
346 | * requires that we find the smallest DMA area between the source |
347 | * and destination. The resulting len values will always be <= UINT_MAX |
348 | * because the dma length is an unsigned int. |
349 | */ |
350 | sg_src_len = sg_dma_len(src->sg_wa.dma_sg) - src->sg_wa.sg_used; |
351 | sg_src_len = min_t(u64, src->sg_wa.bytes_left, sg_src_len); |
352 | |
353 | if (dst) { |
354 | sg_dst_len = sg_dma_len(dst->sg_wa.dma_sg) - dst->sg_wa.sg_used; |
355 | sg_dst_len = min_t(u64, src->sg_wa.bytes_left, sg_dst_len); |
356 | op_len = min(sg_src_len, sg_dst_len); |
357 | } else { |
358 | op_len = sg_src_len; |
359 | } |
360 | |
361 | /* The data operation length will be at least block_size in length |
362 | * or the smaller of available sg room remaining for the source or |
363 | * the destination |
364 | */ |
365 | op_len = max(op_len, block_size); |
366 | |
367 | /* Unless we have to buffer data, there's no reason to wait */ |
368 | op->soc = 0; |
369 | |
370 | if (sg_src_len < block_size) { |
371 | /* Not enough data in the sg element, so it |
372 | * needs to be buffered into a blocksize chunk |
373 | */ |
374 | int cp_len = ccp_fill_queue_buf(data: src); |
375 | |
376 | op->soc = 1; |
377 | op->src.u.dma.address = src->dm_wa.dma.address; |
378 | op->src.u.dma.offset = 0; |
379 | op->src.u.dma.length = (blocksize_op) ? block_size : cp_len; |
380 | } else { |
381 | /* Enough data in the sg element, but we need to |
382 | * adjust for any previously copied data |
383 | */ |
384 | op->src.u.dma.address = sg_dma_address(src->sg_wa.dma_sg); |
385 | op->src.u.dma.offset = src->sg_wa.sg_used; |
386 | op->src.u.dma.length = op_len & ~(block_size - 1); |
387 | |
388 | ccp_update_sg_workarea(wa: &src->sg_wa, len: op->src.u.dma.length); |
389 | } |
390 | |
391 | if (dst) { |
392 | if (sg_dst_len < block_size) { |
393 | /* Not enough room in the sg element or we're on the |
394 | * last piece of data (when using padding), so the |
395 | * output needs to be buffered into a blocksize chunk |
396 | */ |
397 | op->soc = 1; |
398 | op->dst.u.dma.address = dst->dm_wa.dma.address; |
399 | op->dst.u.dma.offset = 0; |
400 | op->dst.u.dma.length = op->src.u.dma.length; |
401 | } else { |
402 | /* Enough room in the sg element, but we need to |
403 | * adjust for any previously used area |
404 | */ |
405 | op->dst.u.dma.address = sg_dma_address(dst->sg_wa.dma_sg); |
406 | op->dst.u.dma.offset = dst->sg_wa.sg_used; |
407 | op->dst.u.dma.length = op->src.u.dma.length; |
408 | } |
409 | } |
410 | } |
411 | |
412 | static void ccp_process_data(struct ccp_data *src, struct ccp_data *dst, |
413 | struct ccp_op *op) |
414 | { |
415 | op->init = 0; |
416 | |
417 | if (dst) { |
418 | if (op->dst.u.dma.address == dst->dm_wa.dma.address) |
419 | ccp_empty_queue_buf(data: dst); |
420 | else |
421 | ccp_update_sg_workarea(wa: &dst->sg_wa, |
422 | len: op->dst.u.dma.length); |
423 | } |
424 | } |
425 | |
426 | static int ccp_copy_to_from_sb(struct ccp_cmd_queue *cmd_q, |
427 | struct ccp_dm_workarea *wa, u32 jobid, u32 sb, |
428 | u32 byte_swap, bool from) |
429 | { |
430 | struct ccp_op op; |
431 | |
432 | memset(&op, 0, sizeof(op)); |
433 | |
434 | op.cmd_q = cmd_q; |
435 | op.jobid = jobid; |
436 | op.eom = 1; |
437 | |
438 | if (from) { |
439 | op.soc = 1; |
440 | op.src.type = CCP_MEMTYPE_SB; |
441 | op.src.u.sb = sb; |
442 | op.dst.type = CCP_MEMTYPE_SYSTEM; |
443 | op.dst.u.dma.address = wa->dma.address; |
444 | op.dst.u.dma.length = wa->length; |
445 | } else { |
446 | op.src.type = CCP_MEMTYPE_SYSTEM; |
447 | op.src.u.dma.address = wa->dma.address; |
448 | op.src.u.dma.length = wa->length; |
449 | op.dst.type = CCP_MEMTYPE_SB; |
450 | op.dst.u.sb = sb; |
451 | } |
452 | |
453 | op.u.passthru.byte_swap = byte_swap; |
454 | |
455 | return cmd_q->ccp->vdata->perform->passthru(&op); |
456 | } |
457 | |
458 | static int ccp_copy_to_sb(struct ccp_cmd_queue *cmd_q, |
459 | struct ccp_dm_workarea *wa, u32 jobid, u32 sb, |
460 | u32 byte_swap) |
461 | { |
462 | return ccp_copy_to_from_sb(cmd_q, wa, jobid, sb, byte_swap, from: false); |
463 | } |
464 | |
465 | static int ccp_copy_from_sb(struct ccp_cmd_queue *cmd_q, |
466 | struct ccp_dm_workarea *wa, u32 jobid, u32 sb, |
467 | u32 byte_swap) |
468 | { |
469 | return ccp_copy_to_from_sb(cmd_q, wa, jobid, sb, byte_swap, from: true); |
470 | } |
471 | |
472 | static noinline_for_stack int |
473 | ccp_run_aes_cmac_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
474 | { |
475 | struct ccp_aes_engine *aes = &cmd->u.aes; |
476 | struct ccp_dm_workarea key, ctx; |
477 | struct ccp_data src; |
478 | struct ccp_op op; |
479 | unsigned int dm_offset; |
480 | int ret; |
481 | |
482 | if (!((aes->key_len == AES_KEYSIZE_128) || |
483 | (aes->key_len == AES_KEYSIZE_192) || |
484 | (aes->key_len == AES_KEYSIZE_256))) |
485 | return -EINVAL; |
486 | |
487 | if (aes->src_len & (AES_BLOCK_SIZE - 1)) |
488 | return -EINVAL; |
489 | |
490 | if (aes->iv_len != AES_BLOCK_SIZE) |
491 | return -EINVAL; |
492 | |
493 | if (!aes->key || !aes->iv || !aes->src) |
494 | return -EINVAL; |
495 | |
496 | if (aes->cmac_final) { |
497 | if (aes->cmac_key_len != AES_BLOCK_SIZE) |
498 | return -EINVAL; |
499 | |
500 | if (!aes->cmac_key) |
501 | return -EINVAL; |
502 | } |
503 | |
504 | BUILD_BUG_ON(CCP_AES_KEY_SB_COUNT != 1); |
505 | BUILD_BUG_ON(CCP_AES_CTX_SB_COUNT != 1); |
506 | |
507 | ret = -EIO; |
508 | memset(&op, 0, sizeof(op)); |
509 | op.cmd_q = cmd_q; |
510 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
511 | op.sb_key = cmd_q->sb_key; |
512 | op.sb_ctx = cmd_q->sb_ctx; |
513 | op.init = 1; |
514 | op.u.aes.type = aes->type; |
515 | op.u.aes.mode = aes->mode; |
516 | op.u.aes.action = aes->action; |
517 | |
518 | /* All supported key sizes fit in a single (32-byte) SB entry |
519 | * and must be in little endian format. Use the 256-bit byte |
520 | * swap passthru option to convert from big endian to little |
521 | * endian. |
522 | */ |
523 | ret = ccp_init_dm_workarea(wa: &key, cmd_q, |
524 | CCP_AES_KEY_SB_COUNT * CCP_SB_BYTES, |
525 | dir: DMA_TO_DEVICE); |
526 | if (ret) |
527 | return ret; |
528 | |
529 | dm_offset = CCP_SB_BYTES - aes->key_len; |
530 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset, sg: aes->key, sg_offset: 0, len: aes->key_len); |
531 | if (ret) |
532 | goto e_key; |
533 | ret = ccp_copy_to_sb(cmd_q, wa: &key, jobid: op.jobid, sb: op.sb_key, |
534 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
535 | if (ret) { |
536 | cmd->engine_error = cmd_q->cmd_error; |
537 | goto e_key; |
538 | } |
539 | |
540 | /* The AES context fits in a single (32-byte) SB entry and |
541 | * must be in little endian format. Use the 256-bit byte swap |
542 | * passthru option to convert from big endian to little endian. |
543 | */ |
544 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, |
545 | CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, |
546 | dir: DMA_BIDIRECTIONAL); |
547 | if (ret) |
548 | goto e_key; |
549 | |
550 | dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; |
551 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
552 | if (ret) |
553 | goto e_ctx; |
554 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
555 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
556 | if (ret) { |
557 | cmd->engine_error = cmd_q->cmd_error; |
558 | goto e_ctx; |
559 | } |
560 | |
561 | /* Send data to the CCP AES engine */ |
562 | ret = ccp_init_data(data: &src, cmd_q, sg: aes->src, sg_len: aes->src_len, |
563 | AES_BLOCK_SIZE, dir: DMA_TO_DEVICE); |
564 | if (ret) |
565 | goto e_ctx; |
566 | |
567 | while (src.sg_wa.bytes_left) { |
568 | ccp_prepare_data(src: &src, NULL, op: &op, AES_BLOCK_SIZE, blocksize_op: true); |
569 | if (aes->cmac_final && !src.sg_wa.bytes_left) { |
570 | op.eom = 1; |
571 | |
572 | /* Push the K1/K2 key to the CCP now */ |
573 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, |
574 | sb: op.sb_ctx, |
575 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
576 | if (ret) { |
577 | cmd->engine_error = cmd_q->cmd_error; |
578 | goto e_src; |
579 | } |
580 | |
581 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: 0, sg: aes->cmac_key, sg_offset: 0, |
582 | len: aes->cmac_key_len); |
583 | if (ret) |
584 | goto e_src; |
585 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
586 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
587 | if (ret) { |
588 | cmd->engine_error = cmd_q->cmd_error; |
589 | goto e_src; |
590 | } |
591 | } |
592 | |
593 | ret = cmd_q->ccp->vdata->perform->aes(&op); |
594 | if (ret) { |
595 | cmd->engine_error = cmd_q->cmd_error; |
596 | goto e_src; |
597 | } |
598 | |
599 | ccp_process_data(src: &src, NULL, op: &op); |
600 | } |
601 | |
602 | /* Retrieve the AES context - convert from LE to BE using |
603 | * 32-byte (256-bit) byteswapping |
604 | */ |
605 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
606 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
607 | if (ret) { |
608 | cmd->engine_error = cmd_q->cmd_error; |
609 | goto e_src; |
610 | } |
611 | |
612 | /* ...but we only need AES_BLOCK_SIZE bytes */ |
613 | dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; |
614 | ccp_get_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
615 | |
616 | e_src: |
617 | ccp_free_data(data: &src, cmd_q); |
618 | |
619 | e_ctx: |
620 | ccp_dm_free(wa: &ctx); |
621 | |
622 | e_key: |
623 | ccp_dm_free(wa: &key); |
624 | |
625 | return ret; |
626 | } |
627 | |
628 | static noinline_for_stack int |
629 | ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
630 | { |
631 | struct ccp_aes_engine *aes = &cmd->u.aes; |
632 | struct ccp_dm_workarea key, ctx, final_wa, tag; |
633 | struct ccp_data src, dst; |
634 | struct ccp_data aad; |
635 | struct ccp_op op; |
636 | unsigned int dm_offset; |
637 | unsigned int authsize; |
638 | unsigned int jobid; |
639 | unsigned int ilen; |
640 | bool in_place = true; /* Default value */ |
641 | __be64 *final; |
642 | int ret; |
643 | |
644 | struct scatterlist *p_inp, sg_inp[2]; |
645 | struct scatterlist *p_tag, sg_tag[2]; |
646 | struct scatterlist *p_outp, sg_outp[2]; |
647 | struct scatterlist *p_aad; |
648 | |
649 | if (!aes->iv) |
650 | return -EINVAL; |
651 | |
652 | if (!((aes->key_len == AES_KEYSIZE_128) || |
653 | (aes->key_len == AES_KEYSIZE_192) || |
654 | (aes->key_len == AES_KEYSIZE_256))) |
655 | return -EINVAL; |
656 | |
657 | if (!aes->key) /* Gotta have a key SGL */ |
658 | return -EINVAL; |
659 | |
660 | /* Zero defaults to 16 bytes, the maximum size */ |
661 | authsize = aes->authsize ? aes->authsize : AES_BLOCK_SIZE; |
662 | switch (authsize) { |
663 | case 16: |
664 | case 15: |
665 | case 14: |
666 | case 13: |
667 | case 12: |
668 | case 8: |
669 | case 4: |
670 | break; |
671 | default: |
672 | return -EINVAL; |
673 | } |
674 | |
675 | /* First, decompose the source buffer into AAD & PT, |
676 | * and the destination buffer into AAD, CT & tag, or |
677 | * the input into CT & tag. |
678 | * It is expected that the input and output SGs will |
679 | * be valid, even if the AAD and input lengths are 0. |
680 | */ |
681 | p_aad = aes->src; |
682 | p_inp = scatterwalk_ffwd(dst: sg_inp, src: aes->src, len: aes->aad_len); |
683 | p_outp = scatterwalk_ffwd(dst: sg_outp, src: aes->dst, len: aes->aad_len); |
684 | if (aes->action == CCP_AES_ACTION_ENCRYPT) { |
685 | ilen = aes->src_len; |
686 | p_tag = scatterwalk_ffwd(dst: sg_tag, src: p_outp, len: ilen); |
687 | } else { |
688 | /* Input length for decryption includes tag */ |
689 | ilen = aes->src_len - authsize; |
690 | p_tag = scatterwalk_ffwd(dst: sg_tag, src: p_inp, len: ilen); |
691 | } |
692 | |
693 | jobid = CCP_NEW_JOBID(cmd_q->ccp); |
694 | |
695 | memset(&op, 0, sizeof(op)); |
696 | op.cmd_q = cmd_q; |
697 | op.jobid = jobid; |
698 | op.sb_key = cmd_q->sb_key; /* Pre-allocated */ |
699 | op.sb_ctx = cmd_q->sb_ctx; /* Pre-allocated */ |
700 | op.init = 1; |
701 | op.u.aes.type = aes->type; |
702 | |
703 | /* Copy the key to the LSB */ |
704 | ret = ccp_init_dm_workarea(wa: &key, cmd_q, |
705 | CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, |
706 | dir: DMA_TO_DEVICE); |
707 | if (ret) |
708 | return ret; |
709 | |
710 | dm_offset = CCP_SB_BYTES - aes->key_len; |
711 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset, sg: aes->key, sg_offset: 0, len: aes->key_len); |
712 | if (ret) |
713 | goto e_key; |
714 | ret = ccp_copy_to_sb(cmd_q, wa: &key, jobid: op.jobid, sb: op.sb_key, |
715 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
716 | if (ret) { |
717 | cmd->engine_error = cmd_q->cmd_error; |
718 | goto e_key; |
719 | } |
720 | |
721 | /* Copy the context (IV) to the LSB. |
722 | * There is an assumption here that the IV is 96 bits in length, plus |
723 | * a nonce of 32 bits. If no IV is present, use a zeroed buffer. |
724 | */ |
725 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, |
726 | CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, |
727 | dir: DMA_BIDIRECTIONAL); |
728 | if (ret) |
729 | goto e_key; |
730 | |
731 | dm_offset = CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES - aes->iv_len; |
732 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
733 | if (ret) |
734 | goto e_ctx; |
735 | |
736 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
737 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
738 | if (ret) { |
739 | cmd->engine_error = cmd_q->cmd_error; |
740 | goto e_ctx; |
741 | } |
742 | |
743 | op.init = 1; |
744 | if (aes->aad_len > 0) { |
745 | /* Step 1: Run a GHASH over the Additional Authenticated Data */ |
746 | ret = ccp_init_data(data: &aad, cmd_q, sg: p_aad, sg_len: aes->aad_len, |
747 | AES_BLOCK_SIZE, |
748 | dir: DMA_TO_DEVICE); |
749 | if (ret) |
750 | goto e_ctx; |
751 | |
752 | op.u.aes.mode = CCP_AES_MODE_GHASH; |
753 | op.u.aes.action = CCP_AES_GHASHAAD; |
754 | |
755 | while (aad.sg_wa.bytes_left) { |
756 | ccp_prepare_data(src: &aad, NULL, op: &op, AES_BLOCK_SIZE, blocksize_op: true); |
757 | |
758 | ret = cmd_q->ccp->vdata->perform->aes(&op); |
759 | if (ret) { |
760 | cmd->engine_error = cmd_q->cmd_error; |
761 | goto e_aad; |
762 | } |
763 | |
764 | ccp_process_data(src: &aad, NULL, op: &op); |
765 | op.init = 0; |
766 | } |
767 | } |
768 | |
769 | op.u.aes.mode = CCP_AES_MODE_GCTR; |
770 | op.u.aes.action = aes->action; |
771 | |
772 | if (ilen > 0) { |
773 | /* Step 2: Run a GCTR over the plaintext */ |
774 | in_place = (sg_virt(sg: p_inp) == sg_virt(sg: p_outp)) ? true : false; |
775 | |
776 | ret = ccp_init_data(data: &src, cmd_q, sg: p_inp, sg_len: ilen, |
777 | AES_BLOCK_SIZE, |
778 | dir: in_place ? DMA_BIDIRECTIONAL |
779 | : DMA_TO_DEVICE); |
780 | if (ret) |
781 | goto e_aad; |
782 | |
783 | if (in_place) { |
784 | dst = src; |
785 | } else { |
786 | ret = ccp_init_data(data: &dst, cmd_q, sg: p_outp, sg_len: ilen, |
787 | AES_BLOCK_SIZE, dir: DMA_FROM_DEVICE); |
788 | if (ret) |
789 | goto e_src; |
790 | } |
791 | |
792 | op.soc = 0; |
793 | op.eom = 0; |
794 | op.init = 1; |
795 | while (src.sg_wa.bytes_left) { |
796 | ccp_prepare_data(src: &src, dst: &dst, op: &op, AES_BLOCK_SIZE, blocksize_op: true); |
797 | if (!src.sg_wa.bytes_left) { |
798 | unsigned int nbytes = ilen % AES_BLOCK_SIZE; |
799 | |
800 | if (nbytes) { |
801 | op.eom = 1; |
802 | op.u.aes.size = (nbytes * 8) - 1; |
803 | } |
804 | } |
805 | |
806 | ret = cmd_q->ccp->vdata->perform->aes(&op); |
807 | if (ret) { |
808 | cmd->engine_error = cmd_q->cmd_error; |
809 | goto e_dst; |
810 | } |
811 | |
812 | ccp_process_data(src: &src, dst: &dst, op: &op); |
813 | op.init = 0; |
814 | } |
815 | } |
816 | |
817 | /* Step 3: Update the IV portion of the context with the original IV */ |
818 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
819 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
820 | if (ret) { |
821 | cmd->engine_error = cmd_q->cmd_error; |
822 | goto e_dst; |
823 | } |
824 | |
825 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
826 | if (ret) |
827 | goto e_dst; |
828 | |
829 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
830 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
831 | if (ret) { |
832 | cmd->engine_error = cmd_q->cmd_error; |
833 | goto e_dst; |
834 | } |
835 | |
836 | /* Step 4: Concatenate the lengths of the AAD and source, and |
837 | * hash that 16 byte buffer. |
838 | */ |
839 | ret = ccp_init_dm_workarea(wa: &final_wa, cmd_q, AES_BLOCK_SIZE, |
840 | dir: DMA_BIDIRECTIONAL); |
841 | if (ret) |
842 | goto e_dst; |
843 | final = (__be64 *)final_wa.address; |
844 | final[0] = cpu_to_be64(aes->aad_len * 8); |
845 | final[1] = cpu_to_be64(ilen * 8); |
846 | |
847 | memset(&op, 0, sizeof(op)); |
848 | op.cmd_q = cmd_q; |
849 | op.jobid = jobid; |
850 | op.sb_key = cmd_q->sb_key; /* Pre-allocated */ |
851 | op.sb_ctx = cmd_q->sb_ctx; /* Pre-allocated */ |
852 | op.init = 1; |
853 | op.u.aes.type = aes->type; |
854 | op.u.aes.mode = CCP_AES_MODE_GHASH; |
855 | op.u.aes.action = CCP_AES_GHASHFINAL; |
856 | op.src.type = CCP_MEMTYPE_SYSTEM; |
857 | op.src.u.dma.address = final_wa.dma.address; |
858 | op.src.u.dma.length = AES_BLOCK_SIZE; |
859 | op.dst.type = CCP_MEMTYPE_SYSTEM; |
860 | op.dst.u.dma.address = final_wa.dma.address; |
861 | op.dst.u.dma.length = AES_BLOCK_SIZE; |
862 | op.eom = 1; |
863 | op.u.aes.size = 0; |
864 | ret = cmd_q->ccp->vdata->perform->aes(&op); |
865 | if (ret) |
866 | goto e_final_wa; |
867 | |
868 | if (aes->action == CCP_AES_ACTION_ENCRYPT) { |
869 | /* Put the ciphered tag after the ciphertext. */ |
870 | ccp_get_dm_area(wa: &final_wa, wa_offset: 0, sg: p_tag, sg_offset: 0, len: authsize); |
871 | } else { |
872 | /* Does this ciphered tag match the input? */ |
873 | ret = ccp_init_dm_workarea(wa: &tag, cmd_q, len: authsize, |
874 | dir: DMA_BIDIRECTIONAL); |
875 | if (ret) |
876 | goto e_final_wa; |
877 | ret = ccp_set_dm_area(wa: &tag, wa_offset: 0, sg: p_tag, sg_offset: 0, len: authsize); |
878 | if (ret) { |
879 | ccp_dm_free(wa: &tag); |
880 | goto e_final_wa; |
881 | } |
882 | |
883 | ret = crypto_memneq(a: tag.address, b: final_wa.address, |
884 | size: authsize) ? -EBADMSG : 0; |
885 | ccp_dm_free(wa: &tag); |
886 | } |
887 | |
888 | e_final_wa: |
889 | ccp_dm_free(wa: &final_wa); |
890 | |
891 | e_dst: |
892 | if (ilen > 0 && !in_place) |
893 | ccp_free_data(data: &dst, cmd_q); |
894 | |
895 | e_src: |
896 | if (ilen > 0) |
897 | ccp_free_data(data: &src, cmd_q); |
898 | |
899 | e_aad: |
900 | if (aes->aad_len) |
901 | ccp_free_data(data: &aad, cmd_q); |
902 | |
903 | e_ctx: |
904 | ccp_dm_free(wa: &ctx); |
905 | |
906 | e_key: |
907 | ccp_dm_free(wa: &key); |
908 | |
909 | return ret; |
910 | } |
911 | |
912 | static noinline_for_stack int |
913 | ccp_run_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
914 | { |
915 | struct ccp_aes_engine *aes = &cmd->u.aes; |
916 | struct ccp_dm_workarea key, ctx; |
917 | struct ccp_data src, dst; |
918 | struct ccp_op op; |
919 | unsigned int dm_offset; |
920 | bool in_place = false; |
921 | int ret; |
922 | |
923 | if (!((aes->key_len == AES_KEYSIZE_128) || |
924 | (aes->key_len == AES_KEYSIZE_192) || |
925 | (aes->key_len == AES_KEYSIZE_256))) |
926 | return -EINVAL; |
927 | |
928 | if (((aes->mode == CCP_AES_MODE_ECB) || |
929 | (aes->mode == CCP_AES_MODE_CBC)) && |
930 | (aes->src_len & (AES_BLOCK_SIZE - 1))) |
931 | return -EINVAL; |
932 | |
933 | if (!aes->key || !aes->src || !aes->dst) |
934 | return -EINVAL; |
935 | |
936 | if (aes->mode != CCP_AES_MODE_ECB) { |
937 | if (aes->iv_len != AES_BLOCK_SIZE) |
938 | return -EINVAL; |
939 | |
940 | if (!aes->iv) |
941 | return -EINVAL; |
942 | } |
943 | |
944 | BUILD_BUG_ON(CCP_AES_KEY_SB_COUNT != 1); |
945 | BUILD_BUG_ON(CCP_AES_CTX_SB_COUNT != 1); |
946 | |
947 | ret = -EIO; |
948 | memset(&op, 0, sizeof(op)); |
949 | op.cmd_q = cmd_q; |
950 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
951 | op.sb_key = cmd_q->sb_key; |
952 | op.sb_ctx = cmd_q->sb_ctx; |
953 | op.init = (aes->mode == CCP_AES_MODE_ECB) ? 0 : 1; |
954 | op.u.aes.type = aes->type; |
955 | op.u.aes.mode = aes->mode; |
956 | op.u.aes.action = aes->action; |
957 | |
958 | /* All supported key sizes fit in a single (32-byte) SB entry |
959 | * and must be in little endian format. Use the 256-bit byte |
960 | * swap passthru option to convert from big endian to little |
961 | * endian. |
962 | */ |
963 | ret = ccp_init_dm_workarea(wa: &key, cmd_q, |
964 | CCP_AES_KEY_SB_COUNT * CCP_SB_BYTES, |
965 | dir: DMA_TO_DEVICE); |
966 | if (ret) |
967 | return ret; |
968 | |
969 | dm_offset = CCP_SB_BYTES - aes->key_len; |
970 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset, sg: aes->key, sg_offset: 0, len: aes->key_len); |
971 | if (ret) |
972 | goto e_key; |
973 | ret = ccp_copy_to_sb(cmd_q, wa: &key, jobid: op.jobid, sb: op.sb_key, |
974 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
975 | if (ret) { |
976 | cmd->engine_error = cmd_q->cmd_error; |
977 | goto e_key; |
978 | } |
979 | |
980 | /* The AES context fits in a single (32-byte) SB entry and |
981 | * must be in little endian format. Use the 256-bit byte swap |
982 | * passthru option to convert from big endian to little endian. |
983 | */ |
984 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, |
985 | CCP_AES_CTX_SB_COUNT * CCP_SB_BYTES, |
986 | dir: DMA_BIDIRECTIONAL); |
987 | if (ret) |
988 | goto e_key; |
989 | |
990 | if (aes->mode != CCP_AES_MODE_ECB) { |
991 | /* Load the AES context - convert to LE */ |
992 | dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; |
993 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
994 | if (ret) |
995 | goto e_ctx; |
996 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
997 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
998 | if (ret) { |
999 | cmd->engine_error = cmd_q->cmd_error; |
1000 | goto e_ctx; |
1001 | } |
1002 | } |
1003 | switch (aes->mode) { |
1004 | case CCP_AES_MODE_CFB: /* CFB128 only */ |
1005 | case CCP_AES_MODE_CTR: |
1006 | op.u.aes.size = AES_BLOCK_SIZE * BITS_PER_BYTE - 1; |
1007 | break; |
1008 | default: |
1009 | op.u.aes.size = 0; |
1010 | } |
1011 | |
1012 | /* Prepare the input and output data workareas. For in-place |
1013 | * operations we need to set the dma direction to BIDIRECTIONAL |
1014 | * and copy the src workarea to the dst workarea. |
1015 | */ |
1016 | if (sg_virt(sg: aes->src) == sg_virt(sg: aes->dst)) |
1017 | in_place = true; |
1018 | |
1019 | ret = ccp_init_data(data: &src, cmd_q, sg: aes->src, sg_len: aes->src_len, |
1020 | AES_BLOCK_SIZE, |
1021 | dir: in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
1022 | if (ret) |
1023 | goto e_ctx; |
1024 | |
1025 | if (in_place) { |
1026 | dst = src; |
1027 | } else { |
1028 | ret = ccp_init_data(data: &dst, cmd_q, sg: aes->dst, sg_len: aes->src_len, |
1029 | AES_BLOCK_SIZE, dir: DMA_FROM_DEVICE); |
1030 | if (ret) |
1031 | goto e_src; |
1032 | } |
1033 | |
1034 | /* Send data to the CCP AES engine */ |
1035 | while (src.sg_wa.bytes_left) { |
1036 | ccp_prepare_data(src: &src, dst: &dst, op: &op, AES_BLOCK_SIZE, blocksize_op: true); |
1037 | if (!src.sg_wa.bytes_left) { |
1038 | op.eom = 1; |
1039 | |
1040 | /* Since we don't retrieve the AES context in ECB |
1041 | * mode we have to wait for the operation to complete |
1042 | * on the last piece of data |
1043 | */ |
1044 | if (aes->mode == CCP_AES_MODE_ECB) |
1045 | op.soc = 1; |
1046 | } |
1047 | |
1048 | ret = cmd_q->ccp->vdata->perform->aes(&op); |
1049 | if (ret) { |
1050 | cmd->engine_error = cmd_q->cmd_error; |
1051 | goto e_dst; |
1052 | } |
1053 | |
1054 | ccp_process_data(src: &src, dst: &dst, op: &op); |
1055 | } |
1056 | |
1057 | if (aes->mode != CCP_AES_MODE_ECB) { |
1058 | /* Retrieve the AES context - convert from LE to BE using |
1059 | * 32-byte (256-bit) byteswapping |
1060 | */ |
1061 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1062 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1063 | if (ret) { |
1064 | cmd->engine_error = cmd_q->cmd_error; |
1065 | goto e_dst; |
1066 | } |
1067 | |
1068 | /* ...but we only need AES_BLOCK_SIZE bytes */ |
1069 | dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; |
1070 | ccp_get_dm_area(wa: &ctx, wa_offset: dm_offset, sg: aes->iv, sg_offset: 0, len: aes->iv_len); |
1071 | } |
1072 | |
1073 | e_dst: |
1074 | if (!in_place) |
1075 | ccp_free_data(data: &dst, cmd_q); |
1076 | |
1077 | e_src: |
1078 | ccp_free_data(data: &src, cmd_q); |
1079 | |
1080 | e_ctx: |
1081 | ccp_dm_free(wa: &ctx); |
1082 | |
1083 | e_key: |
1084 | ccp_dm_free(wa: &key); |
1085 | |
1086 | return ret; |
1087 | } |
1088 | |
1089 | static noinline_for_stack int |
1090 | ccp_run_xts_aes_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
1091 | { |
1092 | struct ccp_xts_aes_engine *xts = &cmd->u.xts; |
1093 | struct ccp_dm_workarea key, ctx; |
1094 | struct ccp_data src, dst; |
1095 | struct ccp_op op; |
1096 | unsigned int unit_size, dm_offset; |
1097 | bool in_place = false; |
1098 | unsigned int sb_count; |
1099 | enum ccp_aes_type aestype; |
1100 | int ret; |
1101 | |
1102 | switch (xts->unit_size) { |
1103 | case CCP_XTS_AES_UNIT_SIZE_16: |
1104 | unit_size = 16; |
1105 | break; |
1106 | case CCP_XTS_AES_UNIT_SIZE_512: |
1107 | unit_size = 512; |
1108 | break; |
1109 | case CCP_XTS_AES_UNIT_SIZE_1024: |
1110 | unit_size = 1024; |
1111 | break; |
1112 | case CCP_XTS_AES_UNIT_SIZE_2048: |
1113 | unit_size = 2048; |
1114 | break; |
1115 | case CCP_XTS_AES_UNIT_SIZE_4096: |
1116 | unit_size = 4096; |
1117 | break; |
1118 | |
1119 | default: |
1120 | return -EINVAL; |
1121 | } |
1122 | |
1123 | if (xts->key_len == AES_KEYSIZE_128) |
1124 | aestype = CCP_AES_TYPE_128; |
1125 | else if (xts->key_len == AES_KEYSIZE_256) |
1126 | aestype = CCP_AES_TYPE_256; |
1127 | else |
1128 | return -EINVAL; |
1129 | |
1130 | if (!xts->final && (xts->src_len & (AES_BLOCK_SIZE - 1))) |
1131 | return -EINVAL; |
1132 | |
1133 | if (xts->iv_len != AES_BLOCK_SIZE) |
1134 | return -EINVAL; |
1135 | |
1136 | if (!xts->key || !xts->iv || !xts->src || !xts->dst) |
1137 | return -EINVAL; |
1138 | |
1139 | BUILD_BUG_ON(CCP_XTS_AES_KEY_SB_COUNT != 1); |
1140 | BUILD_BUG_ON(CCP_XTS_AES_CTX_SB_COUNT != 1); |
1141 | |
1142 | ret = -EIO; |
1143 | memset(&op, 0, sizeof(op)); |
1144 | op.cmd_q = cmd_q; |
1145 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
1146 | op.sb_key = cmd_q->sb_key; |
1147 | op.sb_ctx = cmd_q->sb_ctx; |
1148 | op.init = 1; |
1149 | op.u.xts.type = aestype; |
1150 | op.u.xts.action = xts->action; |
1151 | op.u.xts.unit_size = xts->unit_size; |
1152 | |
1153 | /* A version 3 device only supports 128-bit keys, which fits into a |
1154 | * single SB entry. A version 5 device uses a 512-bit vector, so two |
1155 | * SB entries. |
1156 | */ |
1157 | if (cmd_q->ccp->vdata->version == CCP_VERSION(3, 0)) |
1158 | sb_count = CCP_XTS_AES_KEY_SB_COUNT; |
1159 | else |
1160 | sb_count = CCP5_XTS_AES_KEY_SB_COUNT; |
1161 | ret = ccp_init_dm_workarea(wa: &key, cmd_q, |
1162 | len: sb_count * CCP_SB_BYTES, |
1163 | dir: DMA_TO_DEVICE); |
1164 | if (ret) |
1165 | return ret; |
1166 | |
1167 | if (cmd_q->ccp->vdata->version == CCP_VERSION(3, 0)) { |
1168 | /* All supported key sizes must be in little endian format. |
1169 | * Use the 256-bit byte swap passthru option to convert from |
1170 | * big endian to little endian. |
1171 | */ |
1172 | dm_offset = CCP_SB_BYTES - AES_KEYSIZE_128; |
1173 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset, sg: xts->key, sg_offset: 0, len: xts->key_len); |
1174 | if (ret) |
1175 | goto e_key; |
1176 | ret = ccp_set_dm_area(wa: &key, wa_offset: 0, sg: xts->key, sg_offset: xts->key_len, len: xts->key_len); |
1177 | if (ret) |
1178 | goto e_key; |
1179 | } else { |
1180 | /* Version 5 CCPs use a 512-bit space for the key: each portion |
1181 | * occupies 256 bits, or one entire slot, and is zero-padded. |
1182 | */ |
1183 | unsigned int pad; |
1184 | |
1185 | dm_offset = CCP_SB_BYTES; |
1186 | pad = dm_offset - xts->key_len; |
1187 | ret = ccp_set_dm_area(wa: &key, wa_offset: pad, sg: xts->key, sg_offset: 0, len: xts->key_len); |
1188 | if (ret) |
1189 | goto e_key; |
1190 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset + pad, sg: xts->key, |
1191 | sg_offset: xts->key_len, len: xts->key_len); |
1192 | if (ret) |
1193 | goto e_key; |
1194 | } |
1195 | ret = ccp_copy_to_sb(cmd_q, wa: &key, jobid: op.jobid, sb: op.sb_key, |
1196 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1197 | if (ret) { |
1198 | cmd->engine_error = cmd_q->cmd_error; |
1199 | goto e_key; |
1200 | } |
1201 | |
1202 | /* The AES context fits in a single (32-byte) SB entry and |
1203 | * for XTS is already in little endian format so no byte swapping |
1204 | * is needed. |
1205 | */ |
1206 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, |
1207 | CCP_XTS_AES_CTX_SB_COUNT * CCP_SB_BYTES, |
1208 | dir: DMA_BIDIRECTIONAL); |
1209 | if (ret) |
1210 | goto e_key; |
1211 | |
1212 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: 0, sg: xts->iv, sg_offset: 0, len: xts->iv_len); |
1213 | if (ret) |
1214 | goto e_ctx; |
1215 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1216 | byte_swap: CCP_PASSTHRU_BYTESWAP_NOOP); |
1217 | if (ret) { |
1218 | cmd->engine_error = cmd_q->cmd_error; |
1219 | goto e_ctx; |
1220 | } |
1221 | |
1222 | /* Prepare the input and output data workareas. For in-place |
1223 | * operations we need to set the dma direction to BIDIRECTIONAL |
1224 | * and copy the src workarea to the dst workarea. |
1225 | */ |
1226 | if (sg_virt(sg: xts->src) == sg_virt(sg: xts->dst)) |
1227 | in_place = true; |
1228 | |
1229 | ret = ccp_init_data(data: &src, cmd_q, sg: xts->src, sg_len: xts->src_len, |
1230 | dm_len: unit_size, |
1231 | dir: in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
1232 | if (ret) |
1233 | goto e_ctx; |
1234 | |
1235 | if (in_place) { |
1236 | dst = src; |
1237 | } else { |
1238 | ret = ccp_init_data(data: &dst, cmd_q, sg: xts->dst, sg_len: xts->src_len, |
1239 | dm_len: unit_size, dir: DMA_FROM_DEVICE); |
1240 | if (ret) |
1241 | goto e_src; |
1242 | } |
1243 | |
1244 | /* Send data to the CCP AES engine */ |
1245 | while (src.sg_wa.bytes_left) { |
1246 | ccp_prepare_data(src: &src, dst: &dst, op: &op, block_size: unit_size, blocksize_op: true); |
1247 | if (!src.sg_wa.bytes_left) |
1248 | op.eom = 1; |
1249 | |
1250 | ret = cmd_q->ccp->vdata->perform->xts_aes(&op); |
1251 | if (ret) { |
1252 | cmd->engine_error = cmd_q->cmd_error; |
1253 | goto e_dst; |
1254 | } |
1255 | |
1256 | ccp_process_data(src: &src, dst: &dst, op: &op); |
1257 | } |
1258 | |
1259 | /* Retrieve the AES context - convert from LE to BE using |
1260 | * 32-byte (256-bit) byteswapping |
1261 | */ |
1262 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1263 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1264 | if (ret) { |
1265 | cmd->engine_error = cmd_q->cmd_error; |
1266 | goto e_dst; |
1267 | } |
1268 | |
1269 | /* ...but we only need AES_BLOCK_SIZE bytes */ |
1270 | dm_offset = CCP_SB_BYTES - AES_BLOCK_SIZE; |
1271 | ccp_get_dm_area(wa: &ctx, wa_offset: dm_offset, sg: xts->iv, sg_offset: 0, len: xts->iv_len); |
1272 | |
1273 | e_dst: |
1274 | if (!in_place) |
1275 | ccp_free_data(data: &dst, cmd_q); |
1276 | |
1277 | e_src: |
1278 | ccp_free_data(data: &src, cmd_q); |
1279 | |
1280 | e_ctx: |
1281 | ccp_dm_free(wa: &ctx); |
1282 | |
1283 | e_key: |
1284 | ccp_dm_free(wa: &key); |
1285 | |
1286 | return ret; |
1287 | } |
1288 | |
1289 | static noinline_for_stack int |
1290 | ccp_run_des3_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
1291 | { |
1292 | struct ccp_des3_engine *des3 = &cmd->u.des3; |
1293 | |
1294 | struct ccp_dm_workarea key, ctx; |
1295 | struct ccp_data src, dst; |
1296 | struct ccp_op op; |
1297 | unsigned int dm_offset; |
1298 | unsigned int len_singlekey; |
1299 | bool in_place = false; |
1300 | int ret; |
1301 | |
1302 | /* Error checks */ |
1303 | if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0)) |
1304 | return -EINVAL; |
1305 | |
1306 | if (!cmd_q->ccp->vdata->perform->des3) |
1307 | return -EINVAL; |
1308 | |
1309 | if (des3->key_len != DES3_EDE_KEY_SIZE) |
1310 | return -EINVAL; |
1311 | |
1312 | if (((des3->mode == CCP_DES3_MODE_ECB) || |
1313 | (des3->mode == CCP_DES3_MODE_CBC)) && |
1314 | (des3->src_len & (DES3_EDE_BLOCK_SIZE - 1))) |
1315 | return -EINVAL; |
1316 | |
1317 | if (!des3->key || !des3->src || !des3->dst) |
1318 | return -EINVAL; |
1319 | |
1320 | if (des3->mode != CCP_DES3_MODE_ECB) { |
1321 | if (des3->iv_len != DES3_EDE_BLOCK_SIZE) |
1322 | return -EINVAL; |
1323 | |
1324 | if (!des3->iv) |
1325 | return -EINVAL; |
1326 | } |
1327 | |
1328 | /* Zero out all the fields of the command desc */ |
1329 | memset(&op, 0, sizeof(op)); |
1330 | |
1331 | /* Set up the Function field */ |
1332 | op.cmd_q = cmd_q; |
1333 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
1334 | op.sb_key = cmd_q->sb_key; |
1335 | |
1336 | op.init = (des3->mode == CCP_DES3_MODE_ECB) ? 0 : 1; |
1337 | op.u.des3.type = des3->type; |
1338 | op.u.des3.mode = des3->mode; |
1339 | op.u.des3.action = des3->action; |
1340 | |
1341 | /* |
1342 | * All supported key sizes fit in a single (32-byte) KSB entry and |
1343 | * (like AES) must be in little endian format. Use the 256-bit byte |
1344 | * swap passthru option to convert from big endian to little endian. |
1345 | */ |
1346 | ret = ccp_init_dm_workarea(wa: &key, cmd_q, |
1347 | CCP_DES3_KEY_SB_COUNT * CCP_SB_BYTES, |
1348 | dir: DMA_TO_DEVICE); |
1349 | if (ret) |
1350 | return ret; |
1351 | |
1352 | /* |
1353 | * The contents of the key triplet are in the reverse order of what |
1354 | * is required by the engine. Copy the 3 pieces individually to put |
1355 | * them where they belong. |
1356 | */ |
1357 | dm_offset = CCP_SB_BYTES - des3->key_len; /* Basic offset */ |
1358 | |
1359 | len_singlekey = des3->key_len / 3; |
1360 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset + 2 * len_singlekey, |
1361 | sg: des3->key, sg_offset: 0, len: len_singlekey); |
1362 | if (ret) |
1363 | goto e_key; |
1364 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset + len_singlekey, |
1365 | sg: des3->key, sg_offset: len_singlekey, len: len_singlekey); |
1366 | if (ret) |
1367 | goto e_key; |
1368 | ret = ccp_set_dm_area(wa: &key, wa_offset: dm_offset, |
1369 | sg: des3->key, sg_offset: 2 * len_singlekey, len: len_singlekey); |
1370 | if (ret) |
1371 | goto e_key; |
1372 | |
1373 | /* Copy the key to the SB */ |
1374 | ret = ccp_copy_to_sb(cmd_q, wa: &key, jobid: op.jobid, sb: op.sb_key, |
1375 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1376 | if (ret) { |
1377 | cmd->engine_error = cmd_q->cmd_error; |
1378 | goto e_key; |
1379 | } |
1380 | |
1381 | /* |
1382 | * The DES3 context fits in a single (32-byte) KSB entry and |
1383 | * must be in little endian format. Use the 256-bit byte swap |
1384 | * passthru option to convert from big endian to little endian. |
1385 | */ |
1386 | if (des3->mode != CCP_DES3_MODE_ECB) { |
1387 | op.sb_ctx = cmd_q->sb_ctx; |
1388 | |
1389 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, |
1390 | CCP_DES3_CTX_SB_COUNT * CCP_SB_BYTES, |
1391 | dir: DMA_BIDIRECTIONAL); |
1392 | if (ret) |
1393 | goto e_key; |
1394 | |
1395 | /* Load the context into the LSB */ |
1396 | dm_offset = CCP_SB_BYTES - des3->iv_len; |
1397 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: dm_offset, sg: des3->iv, sg_offset: 0, |
1398 | len: des3->iv_len); |
1399 | if (ret) |
1400 | goto e_ctx; |
1401 | |
1402 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1403 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1404 | if (ret) { |
1405 | cmd->engine_error = cmd_q->cmd_error; |
1406 | goto e_ctx; |
1407 | } |
1408 | } |
1409 | |
1410 | /* |
1411 | * Prepare the input and output data workareas. For in-place |
1412 | * operations we need to set the dma direction to BIDIRECTIONAL |
1413 | * and copy the src workarea to the dst workarea. |
1414 | */ |
1415 | if (sg_virt(sg: des3->src) == sg_virt(sg: des3->dst)) |
1416 | in_place = true; |
1417 | |
1418 | ret = ccp_init_data(data: &src, cmd_q, sg: des3->src, sg_len: des3->src_len, |
1419 | DES3_EDE_BLOCK_SIZE, |
1420 | dir: in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
1421 | if (ret) |
1422 | goto e_ctx; |
1423 | |
1424 | if (in_place) |
1425 | dst = src; |
1426 | else { |
1427 | ret = ccp_init_data(data: &dst, cmd_q, sg: des3->dst, sg_len: des3->src_len, |
1428 | DES3_EDE_BLOCK_SIZE, dir: DMA_FROM_DEVICE); |
1429 | if (ret) |
1430 | goto e_src; |
1431 | } |
1432 | |
1433 | /* Send data to the CCP DES3 engine */ |
1434 | while (src.sg_wa.bytes_left) { |
1435 | ccp_prepare_data(src: &src, dst: &dst, op: &op, DES3_EDE_BLOCK_SIZE, blocksize_op: true); |
1436 | if (!src.sg_wa.bytes_left) { |
1437 | op.eom = 1; |
1438 | |
1439 | /* Since we don't retrieve the context in ECB mode |
1440 | * we have to wait for the operation to complete |
1441 | * on the last piece of data |
1442 | */ |
1443 | op.soc = 0; |
1444 | } |
1445 | |
1446 | ret = cmd_q->ccp->vdata->perform->des3(&op); |
1447 | if (ret) { |
1448 | cmd->engine_error = cmd_q->cmd_error; |
1449 | goto e_dst; |
1450 | } |
1451 | |
1452 | ccp_process_data(src: &src, dst: &dst, op: &op); |
1453 | } |
1454 | |
1455 | if (des3->mode != CCP_DES3_MODE_ECB) { |
1456 | /* Retrieve the context and make BE */ |
1457 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1458 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1459 | if (ret) { |
1460 | cmd->engine_error = cmd_q->cmd_error; |
1461 | goto e_dst; |
1462 | } |
1463 | |
1464 | /* ...but we only need the last DES3_EDE_BLOCK_SIZE bytes */ |
1465 | ccp_get_dm_area(wa: &ctx, wa_offset: dm_offset, sg: des3->iv, sg_offset: 0, |
1466 | DES3_EDE_BLOCK_SIZE); |
1467 | } |
1468 | e_dst: |
1469 | if (!in_place) |
1470 | ccp_free_data(data: &dst, cmd_q); |
1471 | |
1472 | e_src: |
1473 | ccp_free_data(data: &src, cmd_q); |
1474 | |
1475 | e_ctx: |
1476 | if (des3->mode != CCP_DES3_MODE_ECB) |
1477 | ccp_dm_free(wa: &ctx); |
1478 | |
1479 | e_key: |
1480 | ccp_dm_free(wa: &key); |
1481 | |
1482 | return ret; |
1483 | } |
1484 | |
1485 | static noinline_for_stack int |
1486 | ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
1487 | { |
1488 | struct ccp_sha_engine *sha = &cmd->u.sha; |
1489 | struct ccp_dm_workarea ctx; |
1490 | struct ccp_data src; |
1491 | struct ccp_op op; |
1492 | unsigned int ioffset, ooffset; |
1493 | unsigned int digest_size; |
1494 | int sb_count; |
1495 | const void *init; |
1496 | u64 block_size; |
1497 | int ctx_size; |
1498 | int ret; |
1499 | |
1500 | switch (sha->type) { |
1501 | case CCP_SHA_TYPE_1: |
1502 | if (sha->ctx_len < SHA1_DIGEST_SIZE) |
1503 | return -EINVAL; |
1504 | block_size = SHA1_BLOCK_SIZE; |
1505 | break; |
1506 | case CCP_SHA_TYPE_224: |
1507 | if (sha->ctx_len < SHA224_DIGEST_SIZE) |
1508 | return -EINVAL; |
1509 | block_size = SHA224_BLOCK_SIZE; |
1510 | break; |
1511 | case CCP_SHA_TYPE_256: |
1512 | if (sha->ctx_len < SHA256_DIGEST_SIZE) |
1513 | return -EINVAL; |
1514 | block_size = SHA256_BLOCK_SIZE; |
1515 | break; |
1516 | case CCP_SHA_TYPE_384: |
1517 | if (cmd_q->ccp->vdata->version < CCP_VERSION(4, 0) |
1518 | || sha->ctx_len < SHA384_DIGEST_SIZE) |
1519 | return -EINVAL; |
1520 | block_size = SHA384_BLOCK_SIZE; |
1521 | break; |
1522 | case CCP_SHA_TYPE_512: |
1523 | if (cmd_q->ccp->vdata->version < CCP_VERSION(4, 0) |
1524 | || sha->ctx_len < SHA512_DIGEST_SIZE) |
1525 | return -EINVAL; |
1526 | block_size = SHA512_BLOCK_SIZE; |
1527 | break; |
1528 | default: |
1529 | return -EINVAL; |
1530 | } |
1531 | |
1532 | if (!sha->ctx) |
1533 | return -EINVAL; |
1534 | |
1535 | if (!sha->final && (sha->src_len & (block_size - 1))) |
1536 | return -EINVAL; |
1537 | |
1538 | /* The version 3 device can't handle zero-length input */ |
1539 | if (cmd_q->ccp->vdata->version == CCP_VERSION(3, 0)) { |
1540 | |
1541 | if (!sha->src_len) { |
1542 | unsigned int digest_len; |
1543 | const u8 *sha_zero; |
1544 | |
1545 | /* Not final, just return */ |
1546 | if (!sha->final) |
1547 | return 0; |
1548 | |
1549 | /* CCP can't do a zero length sha operation so the |
1550 | * caller must buffer the data. |
1551 | */ |
1552 | if (sha->msg_bits) |
1553 | return -EINVAL; |
1554 | |
1555 | /* The CCP cannot perform zero-length sha operations |
1556 | * so the caller is required to buffer data for the |
1557 | * final operation. However, a sha operation for a |
1558 | * message with a total length of zero is valid so |
1559 | * known values are required to supply the result. |
1560 | */ |
1561 | switch (sha->type) { |
1562 | case CCP_SHA_TYPE_1: |
1563 | sha_zero = sha1_zero_message_hash; |
1564 | digest_len = SHA1_DIGEST_SIZE; |
1565 | break; |
1566 | case CCP_SHA_TYPE_224: |
1567 | sha_zero = sha224_zero_message_hash; |
1568 | digest_len = SHA224_DIGEST_SIZE; |
1569 | break; |
1570 | case CCP_SHA_TYPE_256: |
1571 | sha_zero = sha256_zero_message_hash; |
1572 | digest_len = SHA256_DIGEST_SIZE; |
1573 | break; |
1574 | default: |
1575 | return -EINVAL; |
1576 | } |
1577 | |
1578 | scatterwalk_map_and_copy(buf: (void *)sha_zero, sg: sha->ctx, start: 0, |
1579 | nbytes: digest_len, out: 1); |
1580 | |
1581 | return 0; |
1582 | } |
1583 | } |
1584 | |
1585 | /* Set variables used throughout */ |
1586 | switch (sha->type) { |
1587 | case CCP_SHA_TYPE_1: |
1588 | digest_size = SHA1_DIGEST_SIZE; |
1589 | init = (void *) ccp_sha1_init; |
1590 | ctx_size = SHA1_DIGEST_SIZE; |
1591 | sb_count = 1; |
1592 | if (cmd_q->ccp->vdata->version != CCP_VERSION(3, 0)) |
1593 | ooffset = ioffset = CCP_SB_BYTES - SHA1_DIGEST_SIZE; |
1594 | else |
1595 | ooffset = ioffset = 0; |
1596 | break; |
1597 | case CCP_SHA_TYPE_224: |
1598 | digest_size = SHA224_DIGEST_SIZE; |
1599 | init = (void *) ccp_sha224_init; |
1600 | ctx_size = SHA256_DIGEST_SIZE; |
1601 | sb_count = 1; |
1602 | ioffset = 0; |
1603 | if (cmd_q->ccp->vdata->version != CCP_VERSION(3, 0)) |
1604 | ooffset = CCP_SB_BYTES - SHA224_DIGEST_SIZE; |
1605 | else |
1606 | ooffset = 0; |
1607 | break; |
1608 | case CCP_SHA_TYPE_256: |
1609 | digest_size = SHA256_DIGEST_SIZE; |
1610 | init = (void *) ccp_sha256_init; |
1611 | ctx_size = SHA256_DIGEST_SIZE; |
1612 | sb_count = 1; |
1613 | ooffset = ioffset = 0; |
1614 | break; |
1615 | case CCP_SHA_TYPE_384: |
1616 | digest_size = SHA384_DIGEST_SIZE; |
1617 | init = (void *) ccp_sha384_init; |
1618 | ctx_size = SHA512_DIGEST_SIZE; |
1619 | sb_count = 2; |
1620 | ioffset = 0; |
1621 | ooffset = 2 * CCP_SB_BYTES - SHA384_DIGEST_SIZE; |
1622 | break; |
1623 | case CCP_SHA_TYPE_512: |
1624 | digest_size = SHA512_DIGEST_SIZE; |
1625 | init = (void *) ccp_sha512_init; |
1626 | ctx_size = SHA512_DIGEST_SIZE; |
1627 | sb_count = 2; |
1628 | ooffset = ioffset = 0; |
1629 | break; |
1630 | default: |
1631 | ret = -EINVAL; |
1632 | goto e_data; |
1633 | } |
1634 | |
1635 | /* For zero-length plaintext the src pointer is ignored; |
1636 | * otherwise both parts must be valid |
1637 | */ |
1638 | if (sha->src_len && !sha->src) |
1639 | return -EINVAL; |
1640 | |
1641 | memset(&op, 0, sizeof(op)); |
1642 | op.cmd_q = cmd_q; |
1643 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
1644 | op.sb_ctx = cmd_q->sb_ctx; /* Pre-allocated */ |
1645 | op.u.sha.type = sha->type; |
1646 | op.u.sha.msg_bits = sha->msg_bits; |
1647 | |
1648 | /* For SHA1/224/256 the context fits in a single (32-byte) SB entry; |
1649 | * SHA384/512 require 2 adjacent SB slots, with the right half in the |
1650 | * first slot, and the left half in the second. Each portion must then |
1651 | * be in little endian format: use the 256-bit byte swap option. |
1652 | */ |
1653 | ret = ccp_init_dm_workarea(wa: &ctx, cmd_q, len: sb_count * CCP_SB_BYTES, |
1654 | dir: DMA_BIDIRECTIONAL); |
1655 | if (ret) |
1656 | return ret; |
1657 | if (sha->first) { |
1658 | switch (sha->type) { |
1659 | case CCP_SHA_TYPE_1: |
1660 | case CCP_SHA_TYPE_224: |
1661 | case CCP_SHA_TYPE_256: |
1662 | memcpy(ctx.address + ioffset, init, ctx_size); |
1663 | break; |
1664 | case CCP_SHA_TYPE_384: |
1665 | case CCP_SHA_TYPE_512: |
1666 | memcpy(ctx.address + ctx_size / 2, init, |
1667 | ctx_size / 2); |
1668 | memcpy(ctx.address, init + ctx_size / 2, |
1669 | ctx_size / 2); |
1670 | break; |
1671 | default: |
1672 | ret = -EINVAL; |
1673 | goto e_ctx; |
1674 | } |
1675 | } else { |
1676 | /* Restore the context */ |
1677 | ret = ccp_set_dm_area(wa: &ctx, wa_offset: 0, sg: sha->ctx, sg_offset: 0, |
1678 | len: sb_count * CCP_SB_BYTES); |
1679 | if (ret) |
1680 | goto e_ctx; |
1681 | } |
1682 | |
1683 | ret = ccp_copy_to_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1684 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1685 | if (ret) { |
1686 | cmd->engine_error = cmd_q->cmd_error; |
1687 | goto e_ctx; |
1688 | } |
1689 | |
1690 | if (sha->src) { |
1691 | /* Send data to the CCP SHA engine; block_size is set above */ |
1692 | ret = ccp_init_data(data: &src, cmd_q, sg: sha->src, sg_len: sha->src_len, |
1693 | dm_len: block_size, dir: DMA_TO_DEVICE); |
1694 | if (ret) |
1695 | goto e_ctx; |
1696 | |
1697 | while (src.sg_wa.bytes_left) { |
1698 | ccp_prepare_data(src: &src, NULL, op: &op, block_size, blocksize_op: false); |
1699 | if (sha->final && !src.sg_wa.bytes_left) |
1700 | op.eom = 1; |
1701 | |
1702 | ret = cmd_q->ccp->vdata->perform->sha(&op); |
1703 | if (ret) { |
1704 | cmd->engine_error = cmd_q->cmd_error; |
1705 | goto e_data; |
1706 | } |
1707 | |
1708 | ccp_process_data(src: &src, NULL, op: &op); |
1709 | } |
1710 | } else { |
1711 | op.eom = 1; |
1712 | ret = cmd_q->ccp->vdata->perform->sha(&op); |
1713 | if (ret) { |
1714 | cmd->engine_error = cmd_q->cmd_error; |
1715 | goto e_data; |
1716 | } |
1717 | } |
1718 | |
1719 | /* Retrieve the SHA context - convert from LE to BE using |
1720 | * 32-byte (256-bit) byteswapping to BE |
1721 | */ |
1722 | ret = ccp_copy_from_sb(cmd_q, wa: &ctx, jobid: op.jobid, sb: op.sb_ctx, |
1723 | byte_swap: CCP_PASSTHRU_BYTESWAP_256BIT); |
1724 | if (ret) { |
1725 | cmd->engine_error = cmd_q->cmd_error; |
1726 | goto e_data; |
1727 | } |
1728 | |
1729 | if (sha->final) { |
1730 | /* Finishing up, so get the digest */ |
1731 | switch (sha->type) { |
1732 | case CCP_SHA_TYPE_1: |
1733 | case CCP_SHA_TYPE_224: |
1734 | case CCP_SHA_TYPE_256: |
1735 | ccp_get_dm_area(wa: &ctx, wa_offset: ooffset, |
1736 | sg: sha->ctx, sg_offset: 0, |
1737 | len: digest_size); |
1738 | break; |
1739 | case CCP_SHA_TYPE_384: |
1740 | case CCP_SHA_TYPE_512: |
1741 | ccp_get_dm_area(wa: &ctx, wa_offset: 0, |
1742 | sg: sha->ctx, LSB_ITEM_SIZE - ooffset, |
1743 | LSB_ITEM_SIZE); |
1744 | ccp_get_dm_area(wa: &ctx, LSB_ITEM_SIZE + ooffset, |
1745 | sg: sha->ctx, sg_offset: 0, |
1746 | LSB_ITEM_SIZE - ooffset); |
1747 | break; |
1748 | default: |
1749 | ret = -EINVAL; |
1750 | goto e_data; |
1751 | } |
1752 | } else { |
1753 | /* Stash the context */ |
1754 | ccp_get_dm_area(wa: &ctx, wa_offset: 0, sg: sha->ctx, sg_offset: 0, |
1755 | len: sb_count * CCP_SB_BYTES); |
1756 | } |
1757 | |
1758 | if (sha->final && sha->opad) { |
1759 | /* HMAC operation, recursively perform final SHA */ |
1760 | struct ccp_cmd hmac_cmd; |
1761 | struct scatterlist sg; |
1762 | u8 *hmac_buf; |
1763 | |
1764 | if (sha->opad_len != block_size) { |
1765 | ret = -EINVAL; |
1766 | goto e_data; |
1767 | } |
1768 | |
1769 | hmac_buf = kmalloc(size: block_size + digest_size, GFP_KERNEL); |
1770 | if (!hmac_buf) { |
1771 | ret = -ENOMEM; |
1772 | goto e_data; |
1773 | } |
1774 | sg_init_one(&sg, hmac_buf, block_size + digest_size); |
1775 | |
1776 | scatterwalk_map_and_copy(buf: hmac_buf, sg: sha->opad, start: 0, nbytes: block_size, out: 0); |
1777 | switch (sha->type) { |
1778 | case CCP_SHA_TYPE_1: |
1779 | case CCP_SHA_TYPE_224: |
1780 | case CCP_SHA_TYPE_256: |
1781 | memcpy(hmac_buf + block_size, |
1782 | ctx.address + ooffset, |
1783 | digest_size); |
1784 | break; |
1785 | case CCP_SHA_TYPE_384: |
1786 | case CCP_SHA_TYPE_512: |
1787 | memcpy(hmac_buf + block_size, |
1788 | ctx.address + LSB_ITEM_SIZE + ooffset, |
1789 | LSB_ITEM_SIZE); |
1790 | memcpy(hmac_buf + block_size + |
1791 | (LSB_ITEM_SIZE - ooffset), |
1792 | ctx.address, |
1793 | LSB_ITEM_SIZE); |
1794 | break; |
1795 | default: |
1796 | kfree(objp: hmac_buf); |
1797 | ret = -EINVAL; |
1798 | goto e_data; |
1799 | } |
1800 | |
1801 | memset(&hmac_cmd, 0, sizeof(hmac_cmd)); |
1802 | hmac_cmd.engine = CCP_ENGINE_SHA; |
1803 | hmac_cmd.u.sha.type = sha->type; |
1804 | hmac_cmd.u.sha.ctx = sha->ctx; |
1805 | hmac_cmd.u.sha.ctx_len = sha->ctx_len; |
1806 | hmac_cmd.u.sha.src = &sg; |
1807 | hmac_cmd.u.sha.src_len = block_size + digest_size; |
1808 | hmac_cmd.u.sha.opad = NULL; |
1809 | hmac_cmd.u.sha.opad_len = 0; |
1810 | hmac_cmd.u.sha.first = 1; |
1811 | hmac_cmd.u.sha.final = 1; |
1812 | hmac_cmd.u.sha.msg_bits = (block_size + digest_size) << 3; |
1813 | |
1814 | ret = ccp_run_sha_cmd(cmd_q, cmd: &hmac_cmd); |
1815 | if (ret) |
1816 | cmd->engine_error = hmac_cmd.engine_error; |
1817 | |
1818 | kfree(objp: hmac_buf); |
1819 | } |
1820 | |
1821 | e_data: |
1822 | if (sha->src) |
1823 | ccp_free_data(data: &src, cmd_q); |
1824 | |
1825 | e_ctx: |
1826 | ccp_dm_free(wa: &ctx); |
1827 | |
1828 | return ret; |
1829 | } |
1830 | |
1831 | static noinline_for_stack int |
1832 | ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
1833 | { |
1834 | struct ccp_rsa_engine *rsa = &cmd->u.rsa; |
1835 | struct ccp_dm_workarea exp, src, dst; |
1836 | struct ccp_op op; |
1837 | unsigned int sb_count, i_len, o_len; |
1838 | int ret; |
1839 | |
1840 | /* Check against the maximum allowable size, in bits */ |
1841 | if (rsa->key_size > cmd_q->ccp->vdata->rsamax) |
1842 | return -EINVAL; |
1843 | |
1844 | if (!rsa->exp || !rsa->mod || !rsa->src || !rsa->dst) |
1845 | return -EINVAL; |
1846 | |
1847 | memset(&op, 0, sizeof(op)); |
1848 | op.cmd_q = cmd_q; |
1849 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
1850 | |
1851 | /* The RSA modulus must precede the message being acted upon, so |
1852 | * it must be copied to a DMA area where the message and the |
1853 | * modulus can be concatenated. Therefore the input buffer |
1854 | * length required is twice the output buffer length (which |
1855 | * must be a multiple of 256-bits). Compute o_len, i_len in bytes. |
1856 | * Buffer sizes must be a multiple of 32 bytes; rounding up may be |
1857 | * required. |
1858 | */ |
1859 | o_len = 32 * ((rsa->key_size + 255) / 256); |
1860 | i_len = o_len * 2; |
1861 | |
1862 | sb_count = 0; |
1863 | if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0)) { |
1864 | /* sb_count is the number of storage block slots required |
1865 | * for the modulus. |
1866 | */ |
1867 | sb_count = o_len / CCP_SB_BYTES; |
1868 | op.sb_key = cmd_q->ccp->vdata->perform->sballoc(cmd_q, |
1869 | sb_count); |
1870 | if (!op.sb_key) |
1871 | return -EIO; |
1872 | } else { |
1873 | /* A version 5 device allows a modulus size that will not fit |
1874 | * in the LSB, so the command will transfer it from memory. |
1875 | * Set the sb key to the default, even though it's not used. |
1876 | */ |
1877 | op.sb_key = cmd_q->sb_key; |
1878 | } |
1879 | |
1880 | /* The RSA exponent must be in little endian format. Reverse its |
1881 | * byte order. |
1882 | */ |
1883 | ret = ccp_init_dm_workarea(wa: &exp, cmd_q, len: o_len, dir: DMA_TO_DEVICE); |
1884 | if (ret) |
1885 | goto e_sb; |
1886 | |
1887 | ret = ccp_reverse_set_dm_area(wa: &exp, wa_offset: 0, sg: rsa->exp, sg_offset: 0, len: rsa->exp_len); |
1888 | if (ret) |
1889 | goto e_exp; |
1890 | |
1891 | if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0)) { |
1892 | /* Copy the exponent to the local storage block, using |
1893 | * as many 32-byte blocks as were allocated above. It's |
1894 | * already little endian, so no further change is required. |
1895 | */ |
1896 | ret = ccp_copy_to_sb(cmd_q, wa: &exp, jobid: op.jobid, sb: op.sb_key, |
1897 | byte_swap: CCP_PASSTHRU_BYTESWAP_NOOP); |
1898 | if (ret) { |
1899 | cmd->engine_error = cmd_q->cmd_error; |
1900 | goto e_exp; |
1901 | } |
1902 | } else { |
1903 | /* The exponent can be retrieved from memory via DMA. */ |
1904 | op.exp.u.dma.address = exp.dma.address; |
1905 | op.exp.u.dma.offset = 0; |
1906 | } |
1907 | |
1908 | /* Concatenate the modulus and the message. Both the modulus and |
1909 | * the operands must be in little endian format. Since the input |
1910 | * is in big endian format it must be converted. |
1911 | */ |
1912 | ret = ccp_init_dm_workarea(wa: &src, cmd_q, len: i_len, dir: DMA_TO_DEVICE); |
1913 | if (ret) |
1914 | goto e_exp; |
1915 | |
1916 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: rsa->mod, sg_offset: 0, len: rsa->mod_len); |
1917 | if (ret) |
1918 | goto e_src; |
1919 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: o_len, sg: rsa->src, sg_offset: 0, len: rsa->src_len); |
1920 | if (ret) |
1921 | goto e_src; |
1922 | |
1923 | /* Prepare the output area for the operation */ |
1924 | ret = ccp_init_dm_workarea(wa: &dst, cmd_q, len: o_len, dir: DMA_FROM_DEVICE); |
1925 | if (ret) |
1926 | goto e_src; |
1927 | |
1928 | op.soc = 1; |
1929 | op.src.u.dma.address = src.dma.address; |
1930 | op.src.u.dma.offset = 0; |
1931 | op.src.u.dma.length = i_len; |
1932 | op.dst.u.dma.address = dst.dma.address; |
1933 | op.dst.u.dma.offset = 0; |
1934 | op.dst.u.dma.length = o_len; |
1935 | |
1936 | op.u.rsa.mod_size = rsa->key_size; |
1937 | op.u.rsa.input_len = i_len; |
1938 | |
1939 | ret = cmd_q->ccp->vdata->perform->rsa(&op); |
1940 | if (ret) { |
1941 | cmd->engine_error = cmd_q->cmd_error; |
1942 | goto e_dst; |
1943 | } |
1944 | |
1945 | ccp_reverse_get_dm_area(wa: &dst, wa_offset: 0, sg: rsa->dst, sg_offset: 0, len: rsa->mod_len); |
1946 | |
1947 | e_dst: |
1948 | ccp_dm_free(wa: &dst); |
1949 | |
1950 | e_src: |
1951 | ccp_dm_free(wa: &src); |
1952 | |
1953 | e_exp: |
1954 | ccp_dm_free(wa: &exp); |
1955 | |
1956 | e_sb: |
1957 | if (sb_count) |
1958 | cmd_q->ccp->vdata->perform->sbfree(cmd_q, op.sb_key, sb_count); |
1959 | |
1960 | return ret; |
1961 | } |
1962 | |
1963 | static noinline_for_stack int |
1964 | ccp_run_passthru_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
1965 | { |
1966 | struct ccp_passthru_engine *pt = &cmd->u.passthru; |
1967 | struct ccp_dm_workarea mask; |
1968 | struct ccp_data src, dst; |
1969 | struct ccp_op op; |
1970 | bool in_place = false; |
1971 | unsigned int i; |
1972 | int ret = 0; |
1973 | |
1974 | if (!pt->final && (pt->src_len & (CCP_PASSTHRU_BLOCKSIZE - 1))) |
1975 | return -EINVAL; |
1976 | |
1977 | if (!pt->src || !pt->dst) |
1978 | return -EINVAL; |
1979 | |
1980 | if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
1981 | if (pt->mask_len != CCP_PASSTHRU_MASKSIZE) |
1982 | return -EINVAL; |
1983 | if (!pt->mask) |
1984 | return -EINVAL; |
1985 | } |
1986 | |
1987 | BUILD_BUG_ON(CCP_PASSTHRU_SB_COUNT != 1); |
1988 | |
1989 | memset(&op, 0, sizeof(op)); |
1990 | op.cmd_q = cmd_q; |
1991 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
1992 | |
1993 | if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
1994 | /* Load the mask */ |
1995 | op.sb_key = cmd_q->sb_key; |
1996 | |
1997 | ret = ccp_init_dm_workarea(wa: &mask, cmd_q, |
1998 | CCP_PASSTHRU_SB_COUNT * |
1999 | CCP_SB_BYTES, |
2000 | dir: DMA_TO_DEVICE); |
2001 | if (ret) |
2002 | return ret; |
2003 | |
2004 | ret = ccp_set_dm_area(wa: &mask, wa_offset: 0, sg: pt->mask, sg_offset: 0, len: pt->mask_len); |
2005 | if (ret) |
2006 | goto e_mask; |
2007 | ret = ccp_copy_to_sb(cmd_q, wa: &mask, jobid: op.jobid, sb: op.sb_key, |
2008 | byte_swap: CCP_PASSTHRU_BYTESWAP_NOOP); |
2009 | if (ret) { |
2010 | cmd->engine_error = cmd_q->cmd_error; |
2011 | goto e_mask; |
2012 | } |
2013 | } |
2014 | |
2015 | /* Prepare the input and output data workareas. For in-place |
2016 | * operations we need to set the dma direction to BIDIRECTIONAL |
2017 | * and copy the src workarea to the dst workarea. |
2018 | */ |
2019 | if (sg_virt(sg: pt->src) == sg_virt(sg: pt->dst)) |
2020 | in_place = true; |
2021 | |
2022 | ret = ccp_init_data(data: &src, cmd_q, sg: pt->src, sg_len: pt->src_len, |
2023 | CCP_PASSTHRU_MASKSIZE, |
2024 | dir: in_place ? DMA_BIDIRECTIONAL : DMA_TO_DEVICE); |
2025 | if (ret) |
2026 | goto e_mask; |
2027 | |
2028 | if (in_place) { |
2029 | dst = src; |
2030 | } else { |
2031 | ret = ccp_init_data(data: &dst, cmd_q, sg: pt->dst, sg_len: pt->src_len, |
2032 | CCP_PASSTHRU_MASKSIZE, dir: DMA_FROM_DEVICE); |
2033 | if (ret) |
2034 | goto e_src; |
2035 | } |
2036 | |
2037 | /* Send data to the CCP Passthru engine |
2038 | * Because the CCP engine works on a single source and destination |
2039 | * dma address at a time, each entry in the source scatterlist |
2040 | * (after the dma_map_sg call) must be less than or equal to the |
2041 | * (remaining) length in the destination scatterlist entry and the |
2042 | * length must be a multiple of CCP_PASSTHRU_BLOCKSIZE |
2043 | */ |
2044 | dst.sg_wa.sg_used = 0; |
2045 | for (i = 1; i <= src.sg_wa.dma_count; i++) { |
2046 | if (!dst.sg_wa.sg || |
2047 | (sg_dma_len(dst.sg_wa.sg) < sg_dma_len(src.sg_wa.sg))) { |
2048 | ret = -EINVAL; |
2049 | goto e_dst; |
2050 | } |
2051 | |
2052 | if (i == src.sg_wa.dma_count) { |
2053 | op.eom = 1; |
2054 | op.soc = 1; |
2055 | } |
2056 | |
2057 | op.src.type = CCP_MEMTYPE_SYSTEM; |
2058 | op.src.u.dma.address = sg_dma_address(src.sg_wa.sg); |
2059 | op.src.u.dma.offset = 0; |
2060 | op.src.u.dma.length = sg_dma_len(src.sg_wa.sg); |
2061 | |
2062 | op.dst.type = CCP_MEMTYPE_SYSTEM; |
2063 | op.dst.u.dma.address = sg_dma_address(dst.sg_wa.sg); |
2064 | op.dst.u.dma.offset = dst.sg_wa.sg_used; |
2065 | op.dst.u.dma.length = op.src.u.dma.length; |
2066 | |
2067 | ret = cmd_q->ccp->vdata->perform->passthru(&op); |
2068 | if (ret) { |
2069 | cmd->engine_error = cmd_q->cmd_error; |
2070 | goto e_dst; |
2071 | } |
2072 | |
2073 | dst.sg_wa.sg_used += sg_dma_len(src.sg_wa.sg); |
2074 | if (dst.sg_wa.sg_used == sg_dma_len(dst.sg_wa.sg)) { |
2075 | dst.sg_wa.sg = sg_next(dst.sg_wa.sg); |
2076 | dst.sg_wa.sg_used = 0; |
2077 | } |
2078 | src.sg_wa.sg = sg_next(src.sg_wa.sg); |
2079 | } |
2080 | |
2081 | e_dst: |
2082 | if (!in_place) |
2083 | ccp_free_data(data: &dst, cmd_q); |
2084 | |
2085 | e_src: |
2086 | ccp_free_data(data: &src, cmd_q); |
2087 | |
2088 | e_mask: |
2089 | if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) |
2090 | ccp_dm_free(wa: &mask); |
2091 | |
2092 | return ret; |
2093 | } |
2094 | |
2095 | static noinline_for_stack int |
2096 | ccp_run_passthru_nomap_cmd(struct ccp_cmd_queue *cmd_q, |
2097 | struct ccp_cmd *cmd) |
2098 | { |
2099 | struct ccp_passthru_nomap_engine *pt = &cmd->u.passthru_nomap; |
2100 | struct ccp_dm_workarea mask; |
2101 | struct ccp_op op; |
2102 | int ret; |
2103 | |
2104 | if (!pt->final && (pt->src_len & (CCP_PASSTHRU_BLOCKSIZE - 1))) |
2105 | return -EINVAL; |
2106 | |
2107 | if (!pt->src_dma || !pt->dst_dma) |
2108 | return -EINVAL; |
2109 | |
2110 | if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
2111 | if (pt->mask_len != CCP_PASSTHRU_MASKSIZE) |
2112 | return -EINVAL; |
2113 | if (!pt->mask) |
2114 | return -EINVAL; |
2115 | } |
2116 | |
2117 | BUILD_BUG_ON(CCP_PASSTHRU_SB_COUNT != 1); |
2118 | |
2119 | memset(&op, 0, sizeof(op)); |
2120 | op.cmd_q = cmd_q; |
2121 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
2122 | |
2123 | if (pt->bit_mod != CCP_PASSTHRU_BITWISE_NOOP) { |
2124 | /* Load the mask */ |
2125 | op.sb_key = cmd_q->sb_key; |
2126 | |
2127 | mask.length = pt->mask_len; |
2128 | mask.dma.address = pt->mask; |
2129 | mask.dma.length = pt->mask_len; |
2130 | |
2131 | ret = ccp_copy_to_sb(cmd_q, wa: &mask, jobid: op.jobid, sb: op.sb_key, |
2132 | byte_swap: CCP_PASSTHRU_BYTESWAP_NOOP); |
2133 | if (ret) { |
2134 | cmd->engine_error = cmd_q->cmd_error; |
2135 | return ret; |
2136 | } |
2137 | } |
2138 | |
2139 | /* Send data to the CCP Passthru engine */ |
2140 | op.eom = 1; |
2141 | op.soc = 1; |
2142 | |
2143 | op.src.type = CCP_MEMTYPE_SYSTEM; |
2144 | op.src.u.dma.address = pt->src_dma; |
2145 | op.src.u.dma.offset = 0; |
2146 | op.src.u.dma.length = pt->src_len; |
2147 | |
2148 | op.dst.type = CCP_MEMTYPE_SYSTEM; |
2149 | op.dst.u.dma.address = pt->dst_dma; |
2150 | op.dst.u.dma.offset = 0; |
2151 | op.dst.u.dma.length = pt->src_len; |
2152 | |
2153 | ret = cmd_q->ccp->vdata->perform->passthru(&op); |
2154 | if (ret) |
2155 | cmd->engine_error = cmd_q->cmd_error; |
2156 | |
2157 | return ret; |
2158 | } |
2159 | |
2160 | static int ccp_run_ecc_mm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
2161 | { |
2162 | struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
2163 | struct ccp_dm_workarea src, dst; |
2164 | struct ccp_op op; |
2165 | int ret; |
2166 | u8 *save; |
2167 | |
2168 | if (!ecc->u.mm.operand_1 || |
2169 | (ecc->u.mm.operand_1_len > CCP_ECC_MODULUS_BYTES)) |
2170 | return -EINVAL; |
2171 | |
2172 | if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) |
2173 | if (!ecc->u.mm.operand_2 || |
2174 | (ecc->u.mm.operand_2_len > CCP_ECC_MODULUS_BYTES)) |
2175 | return -EINVAL; |
2176 | |
2177 | if (!ecc->u.mm.result || |
2178 | (ecc->u.mm.result_len < CCP_ECC_MODULUS_BYTES)) |
2179 | return -EINVAL; |
2180 | |
2181 | memset(&op, 0, sizeof(op)); |
2182 | op.cmd_q = cmd_q; |
2183 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
2184 | |
2185 | /* Concatenate the modulus and the operands. Both the modulus and |
2186 | * the operands must be in little endian format. Since the input |
2187 | * is in big endian format it must be converted and placed in a |
2188 | * fixed length buffer. |
2189 | */ |
2190 | ret = ccp_init_dm_workarea(wa: &src, cmd_q, CCP_ECC_SRC_BUF_SIZE, |
2191 | dir: DMA_TO_DEVICE); |
2192 | if (ret) |
2193 | return ret; |
2194 | |
2195 | /* Save the workarea address since it is updated in order to perform |
2196 | * the concatenation |
2197 | */ |
2198 | save = src.address; |
2199 | |
2200 | /* Copy the ECC modulus */ |
2201 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->mod, sg_offset: 0, len: ecc->mod_len); |
2202 | if (ret) |
2203 | goto e_src; |
2204 | src.address += CCP_ECC_OPERAND_SIZE; |
2205 | |
2206 | /* Copy the first operand */ |
2207 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.mm.operand_1, sg_offset: 0, |
2208 | len: ecc->u.mm.operand_1_len); |
2209 | if (ret) |
2210 | goto e_src; |
2211 | src.address += CCP_ECC_OPERAND_SIZE; |
2212 | |
2213 | if (ecc->function != CCP_ECC_FUNCTION_MINV_384BIT) { |
2214 | /* Copy the second operand */ |
2215 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.mm.operand_2, sg_offset: 0, |
2216 | len: ecc->u.mm.operand_2_len); |
2217 | if (ret) |
2218 | goto e_src; |
2219 | src.address += CCP_ECC_OPERAND_SIZE; |
2220 | } |
2221 | |
2222 | /* Restore the workarea address */ |
2223 | src.address = save; |
2224 | |
2225 | /* Prepare the output area for the operation */ |
2226 | ret = ccp_init_dm_workarea(wa: &dst, cmd_q, CCP_ECC_DST_BUF_SIZE, |
2227 | dir: DMA_FROM_DEVICE); |
2228 | if (ret) |
2229 | goto e_src; |
2230 | |
2231 | op.soc = 1; |
2232 | op.src.u.dma.address = src.dma.address; |
2233 | op.src.u.dma.offset = 0; |
2234 | op.src.u.dma.length = src.length; |
2235 | op.dst.u.dma.address = dst.dma.address; |
2236 | op.dst.u.dma.offset = 0; |
2237 | op.dst.u.dma.length = dst.length; |
2238 | |
2239 | op.u.ecc.function = cmd->u.ecc.function; |
2240 | |
2241 | ret = cmd_q->ccp->vdata->perform->ecc(&op); |
2242 | if (ret) { |
2243 | cmd->engine_error = cmd_q->cmd_error; |
2244 | goto e_dst; |
2245 | } |
2246 | |
2247 | ecc->ecc_result = le16_to_cpup( |
2248 | p: (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); |
2249 | if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { |
2250 | ret = -EIO; |
2251 | goto e_dst; |
2252 | } |
2253 | |
2254 | /* Save the ECC result */ |
2255 | ccp_reverse_get_dm_area(wa: &dst, wa_offset: 0, sg: ecc->u.mm.result, sg_offset: 0, |
2256 | CCP_ECC_MODULUS_BYTES); |
2257 | |
2258 | e_dst: |
2259 | ccp_dm_free(wa: &dst); |
2260 | |
2261 | e_src: |
2262 | ccp_dm_free(wa: &src); |
2263 | |
2264 | return ret; |
2265 | } |
2266 | |
2267 | static int ccp_run_ecc_pm_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
2268 | { |
2269 | struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
2270 | struct ccp_dm_workarea src, dst; |
2271 | struct ccp_op op; |
2272 | int ret; |
2273 | u8 *save; |
2274 | |
2275 | if (!ecc->u.pm.point_1.x || |
2276 | (ecc->u.pm.point_1.x_len > CCP_ECC_MODULUS_BYTES) || |
2277 | !ecc->u.pm.point_1.y || |
2278 | (ecc->u.pm.point_1.y_len > CCP_ECC_MODULUS_BYTES)) |
2279 | return -EINVAL; |
2280 | |
2281 | if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { |
2282 | if (!ecc->u.pm.point_2.x || |
2283 | (ecc->u.pm.point_2.x_len > CCP_ECC_MODULUS_BYTES) || |
2284 | !ecc->u.pm.point_2.y || |
2285 | (ecc->u.pm.point_2.y_len > CCP_ECC_MODULUS_BYTES)) |
2286 | return -EINVAL; |
2287 | } else { |
2288 | if (!ecc->u.pm.domain_a || |
2289 | (ecc->u.pm.domain_a_len > CCP_ECC_MODULUS_BYTES)) |
2290 | return -EINVAL; |
2291 | |
2292 | if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) |
2293 | if (!ecc->u.pm.scalar || |
2294 | (ecc->u.pm.scalar_len > CCP_ECC_MODULUS_BYTES)) |
2295 | return -EINVAL; |
2296 | } |
2297 | |
2298 | if (!ecc->u.pm.result.x || |
2299 | (ecc->u.pm.result.x_len < CCP_ECC_MODULUS_BYTES) || |
2300 | !ecc->u.pm.result.y || |
2301 | (ecc->u.pm.result.y_len < CCP_ECC_MODULUS_BYTES)) |
2302 | return -EINVAL; |
2303 | |
2304 | memset(&op, 0, sizeof(op)); |
2305 | op.cmd_q = cmd_q; |
2306 | op.jobid = CCP_NEW_JOBID(cmd_q->ccp); |
2307 | |
2308 | /* Concatenate the modulus and the operands. Both the modulus and |
2309 | * the operands must be in little endian format. Since the input |
2310 | * is in big endian format it must be converted and placed in a |
2311 | * fixed length buffer. |
2312 | */ |
2313 | ret = ccp_init_dm_workarea(wa: &src, cmd_q, CCP_ECC_SRC_BUF_SIZE, |
2314 | dir: DMA_TO_DEVICE); |
2315 | if (ret) |
2316 | return ret; |
2317 | |
2318 | /* Save the workarea address since it is updated in order to perform |
2319 | * the concatenation |
2320 | */ |
2321 | save = src.address; |
2322 | |
2323 | /* Copy the ECC modulus */ |
2324 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->mod, sg_offset: 0, len: ecc->mod_len); |
2325 | if (ret) |
2326 | goto e_src; |
2327 | src.address += CCP_ECC_OPERAND_SIZE; |
2328 | |
2329 | /* Copy the first point X and Y coordinate */ |
2330 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.pm.point_1.x, sg_offset: 0, |
2331 | len: ecc->u.pm.point_1.x_len); |
2332 | if (ret) |
2333 | goto e_src; |
2334 | src.address += CCP_ECC_OPERAND_SIZE; |
2335 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.pm.point_1.y, sg_offset: 0, |
2336 | len: ecc->u.pm.point_1.y_len); |
2337 | if (ret) |
2338 | goto e_src; |
2339 | src.address += CCP_ECC_OPERAND_SIZE; |
2340 | |
2341 | /* Set the first point Z coordinate to 1 */ |
2342 | *src.address = 0x01; |
2343 | src.address += CCP_ECC_OPERAND_SIZE; |
2344 | |
2345 | if (ecc->function == CCP_ECC_FUNCTION_PADD_384BIT) { |
2346 | /* Copy the second point X and Y coordinate */ |
2347 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.pm.point_2.x, sg_offset: 0, |
2348 | len: ecc->u.pm.point_2.x_len); |
2349 | if (ret) |
2350 | goto e_src; |
2351 | src.address += CCP_ECC_OPERAND_SIZE; |
2352 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.pm.point_2.y, sg_offset: 0, |
2353 | len: ecc->u.pm.point_2.y_len); |
2354 | if (ret) |
2355 | goto e_src; |
2356 | src.address += CCP_ECC_OPERAND_SIZE; |
2357 | |
2358 | /* Set the second point Z coordinate to 1 */ |
2359 | *src.address = 0x01; |
2360 | src.address += CCP_ECC_OPERAND_SIZE; |
2361 | } else { |
2362 | /* Copy the Domain "a" parameter */ |
2363 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, sg: ecc->u.pm.domain_a, sg_offset: 0, |
2364 | len: ecc->u.pm.domain_a_len); |
2365 | if (ret) |
2366 | goto e_src; |
2367 | src.address += CCP_ECC_OPERAND_SIZE; |
2368 | |
2369 | if (ecc->function == CCP_ECC_FUNCTION_PMUL_384BIT) { |
2370 | /* Copy the scalar value */ |
2371 | ret = ccp_reverse_set_dm_area(wa: &src, wa_offset: 0, |
2372 | sg: ecc->u.pm.scalar, sg_offset: 0, |
2373 | len: ecc->u.pm.scalar_len); |
2374 | if (ret) |
2375 | goto e_src; |
2376 | src.address += CCP_ECC_OPERAND_SIZE; |
2377 | } |
2378 | } |
2379 | |
2380 | /* Restore the workarea address */ |
2381 | src.address = save; |
2382 | |
2383 | /* Prepare the output area for the operation */ |
2384 | ret = ccp_init_dm_workarea(wa: &dst, cmd_q, CCP_ECC_DST_BUF_SIZE, |
2385 | dir: DMA_FROM_DEVICE); |
2386 | if (ret) |
2387 | goto e_src; |
2388 | |
2389 | op.soc = 1; |
2390 | op.src.u.dma.address = src.dma.address; |
2391 | op.src.u.dma.offset = 0; |
2392 | op.src.u.dma.length = src.length; |
2393 | op.dst.u.dma.address = dst.dma.address; |
2394 | op.dst.u.dma.offset = 0; |
2395 | op.dst.u.dma.length = dst.length; |
2396 | |
2397 | op.u.ecc.function = cmd->u.ecc.function; |
2398 | |
2399 | ret = cmd_q->ccp->vdata->perform->ecc(&op); |
2400 | if (ret) { |
2401 | cmd->engine_error = cmd_q->cmd_error; |
2402 | goto e_dst; |
2403 | } |
2404 | |
2405 | ecc->ecc_result = le16_to_cpup( |
2406 | p: (const __le16 *)(dst.address + CCP_ECC_RESULT_OFFSET)); |
2407 | if (!(ecc->ecc_result & CCP_ECC_RESULT_SUCCESS)) { |
2408 | ret = -EIO; |
2409 | goto e_dst; |
2410 | } |
2411 | |
2412 | /* Save the workarea address since it is updated as we walk through |
2413 | * to copy the point math result |
2414 | */ |
2415 | save = dst.address; |
2416 | |
2417 | /* Save the ECC result X and Y coordinates */ |
2418 | ccp_reverse_get_dm_area(wa: &dst, wa_offset: 0, sg: ecc->u.pm.result.x, sg_offset: 0, |
2419 | CCP_ECC_MODULUS_BYTES); |
2420 | dst.address += CCP_ECC_OUTPUT_SIZE; |
2421 | ccp_reverse_get_dm_area(wa: &dst, wa_offset: 0, sg: ecc->u.pm.result.y, sg_offset: 0, |
2422 | CCP_ECC_MODULUS_BYTES); |
2423 | |
2424 | /* Restore the workarea address */ |
2425 | dst.address = save; |
2426 | |
2427 | e_dst: |
2428 | ccp_dm_free(wa: &dst); |
2429 | |
2430 | e_src: |
2431 | ccp_dm_free(wa: &src); |
2432 | |
2433 | return ret; |
2434 | } |
2435 | |
2436 | static noinline_for_stack int |
2437 | ccp_run_ecc_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
2438 | { |
2439 | struct ccp_ecc_engine *ecc = &cmd->u.ecc; |
2440 | |
2441 | ecc->ecc_result = 0; |
2442 | |
2443 | if (!ecc->mod || |
2444 | (ecc->mod_len > CCP_ECC_MODULUS_BYTES)) |
2445 | return -EINVAL; |
2446 | |
2447 | switch (ecc->function) { |
2448 | case CCP_ECC_FUNCTION_MMUL_384BIT: |
2449 | case CCP_ECC_FUNCTION_MADD_384BIT: |
2450 | case CCP_ECC_FUNCTION_MINV_384BIT: |
2451 | return ccp_run_ecc_mm_cmd(cmd_q, cmd); |
2452 | |
2453 | case CCP_ECC_FUNCTION_PADD_384BIT: |
2454 | case CCP_ECC_FUNCTION_PMUL_384BIT: |
2455 | case CCP_ECC_FUNCTION_PDBL_384BIT: |
2456 | return ccp_run_ecc_pm_cmd(cmd_q, cmd); |
2457 | |
2458 | default: |
2459 | return -EINVAL; |
2460 | } |
2461 | } |
2462 | |
2463 | int ccp_run_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd) |
2464 | { |
2465 | int ret; |
2466 | |
2467 | cmd->engine_error = 0; |
2468 | cmd_q->cmd_error = 0; |
2469 | cmd_q->int_rcvd = 0; |
2470 | cmd_q->free_slots = cmd_q->ccp->vdata->perform->get_free_slots(cmd_q); |
2471 | |
2472 | switch (cmd->engine) { |
2473 | case CCP_ENGINE_AES: |
2474 | switch (cmd->u.aes.mode) { |
2475 | case CCP_AES_MODE_CMAC: |
2476 | ret = ccp_run_aes_cmac_cmd(cmd_q, cmd); |
2477 | break; |
2478 | case CCP_AES_MODE_GCM: |
2479 | ret = ccp_run_aes_gcm_cmd(cmd_q, cmd); |
2480 | break; |
2481 | default: |
2482 | ret = ccp_run_aes_cmd(cmd_q, cmd); |
2483 | break; |
2484 | } |
2485 | break; |
2486 | case CCP_ENGINE_XTS_AES_128: |
2487 | ret = ccp_run_xts_aes_cmd(cmd_q, cmd); |
2488 | break; |
2489 | case CCP_ENGINE_DES3: |
2490 | ret = ccp_run_des3_cmd(cmd_q, cmd); |
2491 | break; |
2492 | case CCP_ENGINE_SHA: |
2493 | ret = ccp_run_sha_cmd(cmd_q, cmd); |
2494 | break; |
2495 | case CCP_ENGINE_RSA: |
2496 | ret = ccp_run_rsa_cmd(cmd_q, cmd); |
2497 | break; |
2498 | case CCP_ENGINE_PASSTHRU: |
2499 | if (cmd->flags & CCP_CMD_PASSTHRU_NO_DMA_MAP) |
2500 | ret = ccp_run_passthru_nomap_cmd(cmd_q, cmd); |
2501 | else |
2502 | ret = ccp_run_passthru_cmd(cmd_q, cmd); |
2503 | break; |
2504 | case CCP_ENGINE_ECC: |
2505 | ret = ccp_run_ecc_cmd(cmd_q, cmd); |
2506 | break; |
2507 | default: |
2508 | ret = -EINVAL; |
2509 | } |
2510 | |
2511 | return ret; |
2512 | } |
2513 | |