1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _BCACHE_JOURNAL_H
3#define _BCACHE_JOURNAL_H
4
5/*
6 * THE JOURNAL:
7 *
8 * The journal is treated as a circular buffer of buckets - a journal entry
9 * never spans two buckets. This means (not implemented yet) we can resize the
10 * journal at runtime, and will be needed for bcache on raw flash support.
11 *
12 * Journal entries contain a list of keys, ordered by the time they were
13 * inserted; thus journal replay just has to reinsert the keys.
14 *
15 * We also keep some things in the journal header that are logically part of the
16 * superblock - all the things that are frequently updated. This is for future
17 * bcache on raw flash support; the superblock (which will become another
18 * journal) can't be moved or wear leveled, so it contains just enough
19 * information to find the main journal, and the superblock only has to be
20 * rewritten when we want to move/wear level the main journal.
21 *
22 * Currently, we don't journal BTREE_REPLACE operations - this will hopefully be
23 * fixed eventually. This isn't a bug - BTREE_REPLACE is used for insertions
24 * from cache misses, which don't have to be journaled, and for writeback and
25 * moving gc we work around it by flushing the btree to disk before updating the
26 * gc information. But it is a potential issue with incremental garbage
27 * collection, and it's fragile.
28 *
29 * OPEN JOURNAL ENTRIES:
30 *
31 * Each journal entry contains, in the header, the sequence number of the last
32 * journal entry still open - i.e. that has keys that haven't been flushed to
33 * disk in the btree.
34 *
35 * We track this by maintaining a refcount for every open journal entry, in a
36 * fifo; each entry in the fifo corresponds to a particular journal
37 * entry/sequence number. When the refcount at the tail of the fifo goes to
38 * zero, we pop it off - thus, the size of the fifo tells us the number of open
39 * journal entries
40 *
41 * We take a refcount on a journal entry when we add some keys to a journal
42 * entry that we're going to insert (held by struct btree_op), and then when we
43 * insert those keys into the btree the btree write we're setting up takes a
44 * copy of that refcount (held by struct btree_write). That refcount is dropped
45 * when the btree write completes.
46 *
47 * A struct btree_write can only hold a refcount on a single journal entry, but
48 * might contain keys for many journal entries - we handle this by making sure
49 * it always has a refcount on the _oldest_ journal entry of all the journal
50 * entries it has keys for.
51 *
52 * JOURNAL RECLAIM:
53 *
54 * As mentioned previously, our fifo of refcounts tells us the number of open
55 * journal entries; from that and the current journal sequence number we compute
56 * last_seq - the oldest journal entry we still need. We write last_seq in each
57 * journal entry, and we also have to keep track of where it exists on disk so
58 * we don't overwrite it when we loop around the journal.
59 *
60 * To do that we track, for each journal bucket, the sequence number of the
61 * newest journal entry it contains - if we don't need that journal entry we
62 * don't need anything in that bucket anymore. From that we track the last
63 * journal bucket we still need; all this is tracked in struct journal_device
64 * and updated by journal_reclaim().
65 *
66 * JOURNAL FILLING UP:
67 *
68 * There are two ways the journal could fill up; either we could run out of
69 * space to write to, or we could have too many open journal entries and run out
70 * of room in the fifo of refcounts. Since those refcounts are decremented
71 * without any locking we can't safely resize that fifo, so we handle it the
72 * same way.
73 *
74 * If the journal fills up, we start flushing dirty btree nodes until we can
75 * allocate space for a journal write again - preferentially flushing btree
76 * nodes that are pinning the oldest journal entries first.
77 */
78
79/*
80 * Only used for holding the journal entries we read in btree_journal_read()
81 * during cache_registration
82 */
83struct journal_replay {
84 struct list_head list;
85 atomic_t *pin;
86 struct jset j;
87};
88
89/*
90 * We put two of these in struct journal; we used them for writes to the
91 * journal that are being staged or in flight.
92 */
93struct journal_write {
94 struct jset *data;
95#define JSET_BITS 3
96
97 struct cache_set *c;
98 struct closure_waitlist wait;
99 bool dirty;
100 bool need_write;
101};
102
103/* Embedded in struct cache_set */
104struct journal {
105 spinlock_t lock;
106 spinlock_t flush_write_lock;
107 bool btree_flushing;
108 bool do_reserve;
109 /* used when waiting because the journal was full */
110 struct closure_waitlist wait;
111 struct closure io;
112 int io_in_flight;
113 struct delayed_work work;
114
115 /* Number of blocks free in the bucket(s) we're currently writing to */
116 unsigned int blocks_free;
117 uint64_t seq;
118 DECLARE_FIFO(atomic_t, pin);
119
120 BKEY_PADDED(key);
121
122 struct journal_write w[2], *cur;
123};
124
125/*
126 * Embedded in struct cache. First three fields refer to the array of journal
127 * buckets, in cache_sb.
128 */
129struct journal_device {
130 /*
131 * For each journal bucket, contains the max sequence number of the
132 * journal writes it contains - so we know when a bucket can be reused.
133 */
134 uint64_t seq[SB_JOURNAL_BUCKETS];
135
136 /* Journal bucket we're currently writing to */
137 unsigned int cur_idx;
138
139 /* Last journal bucket that still contains an open journal entry */
140 unsigned int last_idx;
141
142 /* Next journal bucket to be discarded */
143 unsigned int discard_idx;
144
145#define DISCARD_READY 0
146#define DISCARD_IN_FLIGHT 1
147#define DISCARD_DONE 2
148 /* 1 - discard in flight, -1 - discard completed */
149 atomic_t discard_in_flight;
150
151 struct work_struct discard_work;
152 struct bio discard_bio;
153 struct bio_vec discard_bv;
154
155 /* Bio for journal reads/writes to this device */
156 struct bio bio;
157 struct bio_vec bv[8];
158};
159
160#define BTREE_FLUSH_NR 8
161
162#define journal_pin_cmp(c, l, r) \
163 (fifo_idx(&(c)->journal.pin, (l)) > fifo_idx(&(c)->journal.pin, (r)))
164
165#define JOURNAL_PIN 20000
166
167#define journal_full(j) \
168 (!(j)->blocks_free || fifo_free(&(j)->pin) <= 1)
169
170struct closure;
171struct cache_set;
172struct btree_op;
173struct keylist;
174
175atomic_t *bch_journal(struct cache_set *c,
176 struct keylist *keys,
177 struct closure *parent);
178void bch_journal_next(struct journal *j);
179void bch_journal_mark(struct cache_set *c, struct list_head *list);
180void bch_journal_meta(struct cache_set *c, struct closure *cl);
181int bch_journal_read(struct cache_set *c, struct list_head *list);
182int bch_journal_replay(struct cache_set *c, struct list_head *list);
183
184void bch_journal_free(struct cache_set *c);
185int bch_journal_alloc(struct cache_set *c);
186void bch_journal_space_reserve(struct journal *j);
187
188#endif /* _BCACHE_JOURNAL_H */
189

source code of linux/drivers/md/bcache/journal.h