1 | // SPDX-License-Identifier: GPL-2.0-only |
2 | /****************************************************************************** |
3 | |
4 | Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved. |
5 | |
6 | |
7 | Contact Information: |
8 | Intel Linux Wireless <ilw@linux.intel.com> |
9 | Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
10 | |
11 | Portions of this file are based on the sample_* files provided by Wireless |
12 | Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes |
13 | <jt@hpl.hp.com> |
14 | |
15 | Portions of this file are based on the Host AP project, |
16 | Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen |
17 | <j@w1.fi> |
18 | Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi> |
19 | |
20 | Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and |
21 | ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c |
22 | available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox |
23 | |
24 | ******************************************************************************/ |
25 | /* |
26 | |
27 | Initial driver on which this is based was developed by Janusz Gorycki, |
28 | Maciej Urbaniak, and Maciej Sosnowski. |
29 | |
30 | Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak. |
31 | |
32 | Theory of Operation |
33 | |
34 | Tx - Commands and Data |
35 | |
36 | Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs) |
37 | Each TBD contains a pointer to the physical (dma_addr_t) address of data being |
38 | sent to the firmware as well as the length of the data. |
39 | |
40 | The host writes to the TBD queue at the WRITE index. The WRITE index points |
41 | to the _next_ packet to be written and is advanced when after the TBD has been |
42 | filled. |
43 | |
44 | The firmware pulls from the TBD queue at the READ index. The READ index points |
45 | to the currently being read entry, and is advanced once the firmware is |
46 | done with a packet. |
47 | |
48 | When data is sent to the firmware, the first TBD is used to indicate to the |
49 | firmware if a Command or Data is being sent. If it is Command, all of the |
50 | command information is contained within the physical address referred to by the |
51 | TBD. If it is Data, the first TBD indicates the type of data packet, number |
52 | of fragments, etc. The next TBD then refers to the actual packet location. |
53 | |
54 | The Tx flow cycle is as follows: |
55 | |
56 | 1) ipw2100_tx() is called by kernel with SKB to transmit |
57 | 2) Packet is move from the tx_free_list and appended to the transmit pending |
58 | list (tx_pend_list) |
59 | 3) work is scheduled to move pending packets into the shared circular queue. |
60 | 4) when placing packet in the circular queue, the incoming SKB is DMA mapped |
61 | to a physical address. That address is entered into a TBD. Two TBDs are |
62 | filled out. The first indicating a data packet, the second referring to the |
63 | actual payload data. |
64 | 5) the packet is removed from tx_pend_list and placed on the end of the |
65 | firmware pending list (fw_pend_list) |
66 | 6) firmware is notified that the WRITE index has |
67 | 7) Once the firmware has processed the TBD, INTA is triggered. |
68 | 8) For each Tx interrupt received from the firmware, the READ index is checked |
69 | to see which TBDs are done being processed. |
70 | 9) For each TBD that has been processed, the ISR pulls the oldest packet |
71 | from the fw_pend_list. |
72 | 10)The packet structure contained in the fw_pend_list is then used |
73 | to unmap the DMA address and to free the SKB originally passed to the driver |
74 | from the kernel. |
75 | 11)The packet structure is placed onto the tx_free_list |
76 | |
77 | The above steps are the same for commands, only the msg_free_list/msg_pend_list |
78 | are used instead of tx_free_list/tx_pend_list |
79 | |
80 | ... |
81 | |
82 | Critical Sections / Locking : |
83 | |
84 | There are two locks utilized. The first is the low level lock (priv->low_lock) |
85 | that protects the following: |
86 | |
87 | - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows: |
88 | |
89 | tx_free_list : Holds pre-allocated Tx buffers. |
90 | TAIL modified in __ipw2100_tx_process() |
91 | HEAD modified in ipw2100_tx() |
92 | |
93 | tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring |
94 | TAIL modified ipw2100_tx() |
95 | HEAD modified by ipw2100_tx_send_data() |
96 | |
97 | msg_free_list : Holds pre-allocated Msg (Command) buffers |
98 | TAIL modified in __ipw2100_tx_process() |
99 | HEAD modified in ipw2100_hw_send_command() |
100 | |
101 | msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring |
102 | TAIL modified in ipw2100_hw_send_command() |
103 | HEAD modified in ipw2100_tx_send_commands() |
104 | |
105 | The flow of data on the TX side is as follows: |
106 | |
107 | MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST |
108 | TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST |
109 | |
110 | The methods that work on the TBD ring are protected via priv->low_lock. |
111 | |
112 | - The internal data state of the device itself |
113 | - Access to the firmware read/write indexes for the BD queues |
114 | and associated logic |
115 | |
116 | All external entry functions are locked with the priv->action_lock to ensure |
117 | that only one external action is invoked at a time. |
118 | |
119 | |
120 | */ |
121 | |
122 | #include <linux/compiler.h> |
123 | #include <linux/errno.h> |
124 | #include <linux/if_arp.h> |
125 | #include <linux/in6.h> |
126 | #include <linux/in.h> |
127 | #include <linux/ip.h> |
128 | #include <linux/kernel.h> |
129 | #include <linux/kmod.h> |
130 | #include <linux/module.h> |
131 | #include <linux/netdevice.h> |
132 | #include <linux/ethtool.h> |
133 | #include <linux/pci.h> |
134 | #include <linux/dma-mapping.h> |
135 | #include <linux/proc_fs.h> |
136 | #include <linux/skbuff.h> |
137 | #include <linux/uaccess.h> |
138 | #include <asm/io.h> |
139 | #include <linux/fs.h> |
140 | #include <linux/mm.h> |
141 | #include <linux/slab.h> |
142 | #include <linux/unistd.h> |
143 | #include <linux/stringify.h> |
144 | #include <linux/tcp.h> |
145 | #include <linux/types.h> |
146 | #include <linux/time.h> |
147 | #include <linux/firmware.h> |
148 | #include <linux/acpi.h> |
149 | #include <linux/ctype.h> |
150 | #include <linux/pm_qos.h> |
151 | |
152 | #include <net/lib80211.h> |
153 | |
154 | #include "ipw2100.h" |
155 | #include "ipw.h" |
156 | |
157 | #define IPW2100_VERSION "git-1.2.2" |
158 | |
159 | #define DRV_NAME "ipw2100" |
160 | #define DRV_VERSION IPW2100_VERSION |
161 | #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver" |
162 | #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation" |
163 | |
164 | static struct pm_qos_request ipw2100_pm_qos_req; |
165 | |
166 | /* Debugging stuff */ |
167 | #ifdef CONFIG_IPW2100_DEBUG |
168 | #define IPW2100_RX_DEBUG /* Reception debugging */ |
169 | #endif |
170 | |
171 | MODULE_DESCRIPTION(DRV_DESCRIPTION); |
172 | MODULE_VERSION(DRV_VERSION); |
173 | MODULE_AUTHOR(DRV_COPYRIGHT); |
174 | MODULE_LICENSE("GPL" ); |
175 | |
176 | static int debug = 0; |
177 | static int network_mode = 0; |
178 | static int channel = 0; |
179 | static int associate = 0; |
180 | static int disable = 0; |
181 | #ifdef CONFIG_PM |
182 | static struct ipw2100_fw ipw2100_firmware; |
183 | #endif |
184 | |
185 | #include <linux/moduleparam.h> |
186 | module_param(debug, int, 0444); |
187 | module_param_named(mode, network_mode, int, 0444); |
188 | module_param(channel, int, 0444); |
189 | module_param(associate, int, 0444); |
190 | module_param(disable, int, 0444); |
191 | |
192 | MODULE_PARM_DESC(debug, "debug level" ); |
193 | MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)" ); |
194 | MODULE_PARM_DESC(channel, "channel" ); |
195 | MODULE_PARM_DESC(associate, "auto associate when scanning (default off)" ); |
196 | MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])" ); |
197 | |
198 | static u32 ipw2100_debug_level = IPW_DL_NONE; |
199 | |
200 | #ifdef CONFIG_IPW2100_DEBUG |
201 | #define IPW_DEBUG(level, message...) \ |
202 | do { \ |
203 | if (ipw2100_debug_level & (level)) { \ |
204 | printk(KERN_DEBUG "ipw2100: %s ", __func__); \ |
205 | printk(message); \ |
206 | } \ |
207 | } while (0) |
208 | #else |
209 | #define IPW_DEBUG(level, message...) do {} while (0) |
210 | #endif /* CONFIG_IPW2100_DEBUG */ |
211 | |
212 | #ifdef CONFIG_IPW2100_DEBUG |
213 | static const char *command_types[] = { |
214 | "undefined" , |
215 | "unused" , /* HOST_ATTENTION */ |
216 | "HOST_COMPLETE" , |
217 | "unused" , /* SLEEP */ |
218 | "unused" , /* HOST_POWER_DOWN */ |
219 | "unused" , |
220 | "SYSTEM_CONFIG" , |
221 | "unused" , /* SET_IMR */ |
222 | "SSID" , |
223 | "MANDATORY_BSSID" , |
224 | "AUTHENTICATION_TYPE" , |
225 | "ADAPTER_ADDRESS" , |
226 | "PORT_TYPE" , |
227 | "INTERNATIONAL_MODE" , |
228 | "CHANNEL" , |
229 | "RTS_THRESHOLD" , |
230 | "FRAG_THRESHOLD" , |
231 | "POWER_MODE" , |
232 | "TX_RATES" , |
233 | "BASIC_TX_RATES" , |
234 | "WEP_KEY_INFO" , |
235 | "unused" , |
236 | "unused" , |
237 | "unused" , |
238 | "unused" , |
239 | "WEP_KEY_INDEX" , |
240 | "WEP_FLAGS" , |
241 | "ADD_MULTICAST" , |
242 | "CLEAR_ALL_MULTICAST" , |
243 | "BEACON_INTERVAL" , |
244 | "ATIM_WINDOW" , |
245 | "CLEAR_STATISTICS" , |
246 | "undefined" , |
247 | "undefined" , |
248 | "undefined" , |
249 | "undefined" , |
250 | "TX_POWER_INDEX" , |
251 | "undefined" , |
252 | "undefined" , |
253 | "undefined" , |
254 | "undefined" , |
255 | "undefined" , |
256 | "undefined" , |
257 | "BROADCAST_SCAN" , |
258 | "CARD_DISABLE" , |
259 | "PREFERRED_BSSID" , |
260 | "SET_SCAN_OPTIONS" , |
261 | "SCAN_DWELL_TIME" , |
262 | "SWEEP_TABLE" , |
263 | "AP_OR_STATION_TABLE" , |
264 | "GROUP_ORDINALS" , |
265 | "SHORT_RETRY_LIMIT" , |
266 | "LONG_RETRY_LIMIT" , |
267 | "unused" , /* SAVE_CALIBRATION */ |
268 | "unused" , /* RESTORE_CALIBRATION */ |
269 | "undefined" , |
270 | "undefined" , |
271 | "undefined" , |
272 | "HOST_PRE_POWER_DOWN" , |
273 | "unused" , /* HOST_INTERRUPT_COALESCING */ |
274 | "undefined" , |
275 | "CARD_DISABLE_PHY_OFF" , |
276 | "MSDU_TX_RATES" , |
277 | "undefined" , |
278 | "SET_STATION_STAT_BITS" , |
279 | "CLEAR_STATIONS_STAT_BITS" , |
280 | "LEAP_ROGUE_MODE" , |
281 | "SET_SECURITY_INFORMATION" , |
282 | "DISASSOCIATION_BSSID" , |
283 | "SET_WPA_ASS_IE" |
284 | }; |
285 | #endif |
286 | |
287 | static const long ipw2100_frequencies[] = { |
288 | 2412, 2417, 2422, 2427, |
289 | 2432, 2437, 2442, 2447, |
290 | 2452, 2457, 2462, 2467, |
291 | 2472, 2484 |
292 | }; |
293 | |
294 | #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies) |
295 | |
296 | static struct ieee80211_rate ipw2100_bg_rates[] = { |
297 | { .bitrate = 10 }, |
298 | { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
299 | { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
300 | { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
301 | }; |
302 | |
303 | #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates) |
304 | |
305 | /* Pre-decl until we get the code solid and then we can clean it up */ |
306 | static void ipw2100_tx_send_commands(struct ipw2100_priv *priv); |
307 | static void ipw2100_tx_send_data(struct ipw2100_priv *priv); |
308 | static int ipw2100_adapter_setup(struct ipw2100_priv *priv); |
309 | |
310 | static void ipw2100_queues_initialize(struct ipw2100_priv *priv); |
311 | static void ipw2100_queues_free(struct ipw2100_priv *priv); |
312 | static int ipw2100_queues_allocate(struct ipw2100_priv *priv); |
313 | |
314 | static int ipw2100_fw_download(struct ipw2100_priv *priv, |
315 | struct ipw2100_fw *fw); |
316 | static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
317 | struct ipw2100_fw *fw); |
318 | static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
319 | size_t max); |
320 | static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
321 | struct ipw2100_fw *fw); |
322 | static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
323 | struct ipw2100_fw *fw); |
324 | static void ipw2100_wx_event_work(struct work_struct *work); |
325 | static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev); |
326 | static const struct iw_handler_def ipw2100_wx_handler_def; |
327 | |
328 | static inline void read_register(struct net_device *dev, u32 reg, u32 * val) |
329 | { |
330 | struct ipw2100_priv *priv = libipw_priv(dev); |
331 | |
332 | *val = ioread32(priv->ioaddr + reg); |
333 | IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n" , reg, *val); |
334 | } |
335 | |
336 | static inline void write_register(struct net_device *dev, u32 reg, u32 val) |
337 | { |
338 | struct ipw2100_priv *priv = libipw_priv(dev); |
339 | |
340 | iowrite32(val, priv->ioaddr + reg); |
341 | IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n" , reg, val); |
342 | } |
343 | |
344 | static inline void read_register_word(struct net_device *dev, u32 reg, |
345 | u16 * val) |
346 | { |
347 | struct ipw2100_priv *priv = libipw_priv(dev); |
348 | |
349 | *val = ioread16(priv->ioaddr + reg); |
350 | IPW_DEBUG_IO("r: 0x%08X => %04X\n" , reg, *val); |
351 | } |
352 | |
353 | static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val) |
354 | { |
355 | struct ipw2100_priv *priv = libipw_priv(dev); |
356 | |
357 | *val = ioread8(priv->ioaddr + reg); |
358 | IPW_DEBUG_IO("r: 0x%08X => %02X\n" , reg, *val); |
359 | } |
360 | |
361 | static inline void write_register_word(struct net_device *dev, u32 reg, u16 val) |
362 | { |
363 | struct ipw2100_priv *priv = libipw_priv(dev); |
364 | |
365 | iowrite16(val, priv->ioaddr + reg); |
366 | IPW_DEBUG_IO("w: 0x%08X <= %04X\n" , reg, val); |
367 | } |
368 | |
369 | static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val) |
370 | { |
371 | struct ipw2100_priv *priv = libipw_priv(dev); |
372 | |
373 | iowrite8(val, priv->ioaddr + reg); |
374 | IPW_DEBUG_IO("w: 0x%08X =< %02X\n" , reg, val); |
375 | } |
376 | |
377 | static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val) |
378 | { |
379 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
380 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
381 | read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
382 | } |
383 | |
384 | static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val) |
385 | { |
386 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
387 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
388 | write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
389 | } |
390 | |
391 | static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val) |
392 | { |
393 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
394 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
395 | read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
396 | } |
397 | |
398 | static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val) |
399 | { |
400 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
401 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
402 | write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
403 | } |
404 | |
405 | static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val) |
406 | { |
407 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
408 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
409 | read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
410 | } |
411 | |
412 | static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val) |
413 | { |
414 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
415 | val: addr & IPW_REG_INDIRECT_ADDR_MASK); |
416 | write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val); |
417 | } |
418 | |
419 | static void write_nic_memory(struct net_device *dev, u32 addr, u32 len, |
420 | const u8 * buf) |
421 | { |
422 | u32 aligned_addr; |
423 | u32 aligned_len; |
424 | u32 dif_len; |
425 | u32 i; |
426 | |
427 | /* read first nibble byte by byte */ |
428 | aligned_addr = addr & (~0x3); |
429 | dif_len = addr - aligned_addr; |
430 | if (dif_len) { |
431 | /* Start reading at aligned_addr + dif_len */ |
432 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
433 | val: aligned_addr); |
434 | for (i = dif_len; i < 4; i++, buf++) |
435 | write_register_byte(dev, |
436 | IPW_REG_INDIRECT_ACCESS_DATA + i, |
437 | val: *buf); |
438 | |
439 | len -= dif_len; |
440 | aligned_addr += 4; |
441 | } |
442 | |
443 | /* read DWs through autoincrement registers */ |
444 | write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, val: aligned_addr); |
445 | aligned_len = len & (~0x3); |
446 | for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
447 | write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val: *(u32 *) buf); |
448 | |
449 | /* copy the last nibble */ |
450 | dif_len = len - aligned_len; |
451 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, val: aligned_addr); |
452 | for (i = 0; i < dif_len; i++, buf++) |
453 | write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, |
454 | val: *buf); |
455 | } |
456 | |
457 | static void read_nic_memory(struct net_device *dev, u32 addr, u32 len, |
458 | u8 * buf) |
459 | { |
460 | u32 aligned_addr; |
461 | u32 aligned_len; |
462 | u32 dif_len; |
463 | u32 i; |
464 | |
465 | /* read first nibble byte by byte */ |
466 | aligned_addr = addr & (~0x3); |
467 | dif_len = addr - aligned_addr; |
468 | if (dif_len) { |
469 | /* Start reading at aligned_addr + dif_len */ |
470 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, |
471 | val: aligned_addr); |
472 | for (i = dif_len; i < 4; i++, buf++) |
473 | read_register_byte(dev, |
474 | IPW_REG_INDIRECT_ACCESS_DATA + i, |
475 | val: buf); |
476 | |
477 | len -= dif_len; |
478 | aligned_addr += 4; |
479 | } |
480 | |
481 | /* read DWs through autoincrement registers */ |
482 | write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, val: aligned_addr); |
483 | aligned_len = len & (~0x3); |
484 | for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4) |
485 | read_register(dev, IPW_REG_AUTOINCREMENT_DATA, val: (u32 *) buf); |
486 | |
487 | /* copy the last nibble */ |
488 | dif_len = len - aligned_len; |
489 | write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, val: aligned_addr); |
490 | for (i = 0; i < dif_len; i++, buf++) |
491 | read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, val: buf); |
492 | } |
493 | |
494 | static bool ipw2100_hw_is_adapter_in_system(struct net_device *dev) |
495 | { |
496 | u32 dbg; |
497 | |
498 | read_register(dev, IPW_REG_DOA_DEBUG_AREA_START, val: &dbg); |
499 | |
500 | return dbg == IPW_DATA_DOA_DEBUG_VALUE; |
501 | } |
502 | |
503 | static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord, |
504 | void *val, u32 * len) |
505 | { |
506 | struct ipw2100_ordinals *ordinals = &priv->ordinals; |
507 | u32 addr; |
508 | u32 field_info; |
509 | u16 field_len; |
510 | u16 field_count; |
511 | u32 total_length; |
512 | |
513 | if (ordinals->table1_addr == 0) { |
514 | printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals " |
515 | "before they have been loaded.\n" ); |
516 | return -EINVAL; |
517 | } |
518 | |
519 | if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
520 | if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) { |
521 | *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
522 | |
523 | printk(KERN_WARNING DRV_NAME |
524 | ": ordinal buffer length too small, need %zd\n" , |
525 | IPW_ORD_TAB_1_ENTRY_SIZE); |
526 | |
527 | return -EINVAL; |
528 | } |
529 | |
530 | read_nic_dword(dev: priv->net_dev, |
531 | addr: ordinals->table1_addr + (ord << 2), val: &addr); |
532 | read_nic_dword(dev: priv->net_dev, addr, val); |
533 | |
534 | *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
535 | |
536 | return 0; |
537 | } |
538 | |
539 | if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) { |
540 | |
541 | ord -= IPW_START_ORD_TAB_2; |
542 | |
543 | /* get the address of statistic */ |
544 | read_nic_dword(dev: priv->net_dev, |
545 | addr: ordinals->table2_addr + (ord << 3), val: &addr); |
546 | |
547 | /* get the second DW of statistics ; |
548 | * two 16-bit words - first is length, second is count */ |
549 | read_nic_dword(dev: priv->net_dev, |
550 | addr: ordinals->table2_addr + (ord << 3) + sizeof(u32), |
551 | val: &field_info); |
552 | |
553 | /* get each entry length */ |
554 | field_len = *((u16 *) & field_info); |
555 | |
556 | /* get number of entries */ |
557 | field_count = *(((u16 *) & field_info) + 1); |
558 | |
559 | /* abort if no enough memory */ |
560 | total_length = field_len * field_count; |
561 | if (total_length > *len) { |
562 | *len = total_length; |
563 | return -EINVAL; |
564 | } |
565 | |
566 | *len = total_length; |
567 | if (!total_length) |
568 | return 0; |
569 | |
570 | /* read the ordinal data from the SRAM */ |
571 | read_nic_memory(dev: priv->net_dev, addr, len: total_length, buf: val); |
572 | |
573 | return 0; |
574 | } |
575 | |
576 | printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor " |
577 | "in table 2\n" , ord); |
578 | |
579 | return -EINVAL; |
580 | } |
581 | |
582 | static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val, |
583 | u32 * len) |
584 | { |
585 | struct ipw2100_ordinals *ordinals = &priv->ordinals; |
586 | u32 addr; |
587 | |
588 | if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) { |
589 | if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) { |
590 | *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
591 | IPW_DEBUG_INFO("wrong size\n" ); |
592 | return -EINVAL; |
593 | } |
594 | |
595 | read_nic_dword(dev: priv->net_dev, |
596 | addr: ordinals->table1_addr + (ord << 2), val: &addr); |
597 | |
598 | write_nic_dword(dev: priv->net_dev, addr, val: *val); |
599 | |
600 | *len = IPW_ORD_TAB_1_ENTRY_SIZE; |
601 | |
602 | return 0; |
603 | } |
604 | |
605 | IPW_DEBUG_INFO("wrong table\n" ); |
606 | if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) |
607 | return -EINVAL; |
608 | |
609 | return -EINVAL; |
610 | } |
611 | |
612 | static char *snprint_line(char *buf, size_t count, |
613 | const u8 * data, u32 len, u32 ofs) |
614 | { |
615 | int out, i, j, l; |
616 | char c; |
617 | |
618 | out = scnprintf(buf, size: count, fmt: "%08X" , ofs); |
619 | |
620 | for (l = 0, i = 0; i < 2; i++) { |
621 | out += scnprintf(buf: buf + out, size: count - out, fmt: " " ); |
622 | for (j = 0; j < 8 && l < len; j++, l++) |
623 | out += scnprintf(buf: buf + out, size: count - out, fmt: "%02X " , |
624 | data[(i * 8 + j)]); |
625 | for (; j < 8; j++) |
626 | out += scnprintf(buf: buf + out, size: count - out, fmt: " " ); |
627 | } |
628 | |
629 | out += scnprintf(buf: buf + out, size: count - out, fmt: " " ); |
630 | for (l = 0, i = 0; i < 2; i++) { |
631 | out += scnprintf(buf: buf + out, size: count - out, fmt: " " ); |
632 | for (j = 0; j < 8 && l < len; j++, l++) { |
633 | c = data[(i * 8 + j)]; |
634 | if (!isascii(c) || !isprint(c)) |
635 | c = '.'; |
636 | |
637 | out += scnprintf(buf: buf + out, size: count - out, fmt: "%c" , c); |
638 | } |
639 | |
640 | for (; j < 8; j++) |
641 | out += scnprintf(buf: buf + out, size: count - out, fmt: " " ); |
642 | } |
643 | |
644 | return buf; |
645 | } |
646 | |
647 | static void printk_buf(int level, const u8 * data, u32 len) |
648 | { |
649 | char line[81]; |
650 | u32 ofs = 0; |
651 | if (!(ipw2100_debug_level & level)) |
652 | return; |
653 | |
654 | while (len) { |
655 | printk(KERN_DEBUG "%s\n" , |
656 | snprint_line(line, sizeof(line), &data[ofs], |
657 | min(len, 16U), ofs)); |
658 | ofs += 16; |
659 | len -= min(len, 16U); |
660 | } |
661 | } |
662 | |
663 | #define MAX_RESET_BACKOFF 10 |
664 | |
665 | static void schedule_reset(struct ipw2100_priv *priv) |
666 | { |
667 | time64_t now = ktime_get_boottime_seconds(); |
668 | |
669 | /* If we haven't received a reset request within the backoff period, |
670 | * then we can reset the backoff interval so this reset occurs |
671 | * immediately */ |
672 | if (priv->reset_backoff && |
673 | (now - priv->last_reset > priv->reset_backoff)) |
674 | priv->reset_backoff = 0; |
675 | |
676 | priv->last_reset = now; |
677 | |
678 | if (!(priv->status & STATUS_RESET_PENDING)) { |
679 | IPW_DEBUG_INFO("%s: Scheduling firmware restart (%llds).\n" , |
680 | priv->net_dev->name, priv->reset_backoff); |
681 | netif_carrier_off(dev: priv->net_dev); |
682 | netif_stop_queue(dev: priv->net_dev); |
683 | priv->status |= STATUS_RESET_PENDING; |
684 | if (priv->reset_backoff) |
685 | schedule_delayed_work(dwork: &priv->reset_work, |
686 | delay: priv->reset_backoff * HZ); |
687 | else |
688 | schedule_delayed_work(dwork: &priv->reset_work, delay: 0); |
689 | |
690 | if (priv->reset_backoff < MAX_RESET_BACKOFF) |
691 | priv->reset_backoff++; |
692 | |
693 | wake_up_interruptible(&priv->wait_command_queue); |
694 | } else |
695 | IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n" , |
696 | priv->net_dev->name); |
697 | |
698 | } |
699 | |
700 | #define HOST_COMPLETE_TIMEOUT (2 * HZ) |
701 | static int ipw2100_hw_send_command(struct ipw2100_priv *priv, |
702 | struct host_command *cmd) |
703 | { |
704 | struct list_head *element; |
705 | struct ipw2100_tx_packet *packet; |
706 | unsigned long flags; |
707 | int err = 0; |
708 | |
709 | IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n" , |
710 | command_types[cmd->host_command], cmd->host_command, |
711 | cmd->host_command_length); |
712 | printk_buf(IPW_DL_HC, data: (u8 *) cmd->host_command_parameters, |
713 | len: cmd->host_command_length); |
714 | |
715 | spin_lock_irqsave(&priv->low_lock, flags); |
716 | |
717 | if (priv->fatal_error) { |
718 | IPW_DEBUG_INFO |
719 | ("Attempt to send command while hardware in fatal error condition.\n" ); |
720 | err = -EIO; |
721 | goto fail_unlock; |
722 | } |
723 | |
724 | if (!(priv->status & STATUS_RUNNING)) { |
725 | IPW_DEBUG_INFO |
726 | ("Attempt to send command while hardware is not running.\n" ); |
727 | err = -EIO; |
728 | goto fail_unlock; |
729 | } |
730 | |
731 | if (priv->status & STATUS_CMD_ACTIVE) { |
732 | IPW_DEBUG_INFO |
733 | ("Attempt to send command while another command is pending.\n" ); |
734 | err = -EBUSY; |
735 | goto fail_unlock; |
736 | } |
737 | |
738 | if (list_empty(head: &priv->msg_free_list)) { |
739 | IPW_DEBUG_INFO("no available msg buffers\n" ); |
740 | goto fail_unlock; |
741 | } |
742 | |
743 | priv->status |= STATUS_CMD_ACTIVE; |
744 | priv->messages_sent++; |
745 | |
746 | element = priv->msg_free_list.next; |
747 | |
748 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
749 | packet->jiffy_start = jiffies; |
750 | |
751 | /* initialize the firmware command packet */ |
752 | packet->info.c_struct.cmd->host_command_reg = cmd->host_command; |
753 | packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1; |
754 | packet->info.c_struct.cmd->host_command_len_reg = |
755 | cmd->host_command_length; |
756 | packet->info.c_struct.cmd->sequence = cmd->host_command_sequence; |
757 | |
758 | memcpy(packet->info.c_struct.cmd->host_command_params_reg, |
759 | cmd->host_command_parameters, |
760 | sizeof(packet->info.c_struct.cmd->host_command_params_reg)); |
761 | |
762 | list_del(entry: element); |
763 | DEC_STAT(&priv->msg_free_stat); |
764 | |
765 | list_add_tail(new: element, head: &priv->msg_pend_list); |
766 | INC_STAT(&priv->msg_pend_stat); |
767 | |
768 | ipw2100_tx_send_commands(priv); |
769 | ipw2100_tx_send_data(priv); |
770 | |
771 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
772 | |
773 | /* |
774 | * We must wait for this command to complete before another |
775 | * command can be sent... but if we wait more than 3 seconds |
776 | * then there is a problem. |
777 | */ |
778 | |
779 | err = |
780 | wait_event_interruptible_timeout(priv->wait_command_queue, |
781 | !(priv-> |
782 | status & STATUS_CMD_ACTIVE), |
783 | HOST_COMPLETE_TIMEOUT); |
784 | |
785 | if (err == 0) { |
786 | IPW_DEBUG_INFO("Command completion failed out after %dms.\n" , |
787 | 1000 * (HOST_COMPLETE_TIMEOUT / HZ)); |
788 | priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT; |
789 | priv->status &= ~STATUS_CMD_ACTIVE; |
790 | schedule_reset(priv); |
791 | return -EIO; |
792 | } |
793 | |
794 | if (priv->fatal_error) { |
795 | printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n" , |
796 | priv->net_dev->name); |
797 | return -EIO; |
798 | } |
799 | |
800 | /* !!!!! HACK TEST !!!!! |
801 | * When lots of debug trace statements are enabled, the driver |
802 | * doesn't seem to have as many firmware restart cycles... |
803 | * |
804 | * As a test, we're sticking in a 1/100s delay here */ |
805 | schedule_timeout_uninterruptible(timeout: msecs_to_jiffies(m: 10)); |
806 | |
807 | return 0; |
808 | |
809 | fail_unlock: |
810 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
811 | |
812 | return err; |
813 | } |
814 | |
815 | /* |
816 | * Verify the values and data access of the hardware |
817 | * No locks needed or used. No functions called. |
818 | */ |
819 | static int ipw2100_verify(struct ipw2100_priv *priv) |
820 | { |
821 | u32 data1, data2; |
822 | u32 address; |
823 | |
824 | u32 val1 = 0x76543210; |
825 | u32 val2 = 0xFEDCBA98; |
826 | |
827 | /* Domain 0 check - all values should be DOA_DEBUG */ |
828 | for (address = IPW_REG_DOA_DEBUG_AREA_START; |
829 | address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) { |
830 | read_register(dev: priv->net_dev, reg: address, val: &data1); |
831 | if (data1 != IPW_DATA_DOA_DEBUG_VALUE) |
832 | return -EIO; |
833 | } |
834 | |
835 | /* Domain 1 check - use arbitrary read/write compare */ |
836 | for (address = 0; address < 5; address++) { |
837 | /* The memory area is not used now */ |
838 | write_register(dev: priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
839 | val: val1); |
840 | write_register(dev: priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
841 | val: val2); |
842 | read_register(dev: priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32, |
843 | val: &data1); |
844 | read_register(dev: priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36, |
845 | val: &data2); |
846 | if (val1 == data1 && val2 == data2) |
847 | return 0; |
848 | } |
849 | |
850 | return -EIO; |
851 | } |
852 | |
853 | /* |
854 | * |
855 | * Loop until the CARD_DISABLED bit is the same value as the |
856 | * supplied parameter |
857 | * |
858 | * TODO: See if it would be more efficient to do a wait/wake |
859 | * cycle and have the completion event trigger the wakeup |
860 | * |
861 | */ |
862 | #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli |
863 | static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state) |
864 | { |
865 | int i; |
866 | u32 card_state; |
867 | u32 len = sizeof(card_state); |
868 | int err; |
869 | |
870 | for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) { |
871 | err = ipw2100_get_ordinal(priv, ord: IPW_ORD_CARD_DISABLED, |
872 | val: &card_state, len: &len); |
873 | if (err) { |
874 | IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal " |
875 | "failed.\n" ); |
876 | return 0; |
877 | } |
878 | |
879 | /* We'll break out if either the HW state says it is |
880 | * in the state we want, or if HOST_COMPLETE command |
881 | * finishes */ |
882 | if ((card_state == state) || |
883 | ((priv->status & STATUS_ENABLED) ? |
884 | IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) { |
885 | if (state == IPW_HW_STATE_ENABLED) |
886 | priv->status |= STATUS_ENABLED; |
887 | else |
888 | priv->status &= ~STATUS_ENABLED; |
889 | |
890 | return 0; |
891 | } |
892 | |
893 | udelay(50); |
894 | } |
895 | |
896 | IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n" , |
897 | state ? "DISABLED" : "ENABLED" ); |
898 | return -EIO; |
899 | } |
900 | |
901 | /********************************************************************* |
902 | Procedure : sw_reset_and_clock |
903 | Purpose : Asserts s/w reset, asserts clock initialization |
904 | and waits for clock stabilization |
905 | ********************************************************************/ |
906 | static int sw_reset_and_clock(struct ipw2100_priv *priv) |
907 | { |
908 | int i; |
909 | u32 r; |
910 | |
911 | // assert s/w reset |
912 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, |
913 | IPW_AUX_HOST_RESET_REG_SW_RESET); |
914 | |
915 | // wait for clock stabilization |
916 | for (i = 0; i < 1000; i++) { |
917 | udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY); |
918 | |
919 | // check clock ready bit |
920 | read_register(dev: priv->net_dev, IPW_REG_RESET_REG, val: &r); |
921 | if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET) |
922 | break; |
923 | } |
924 | |
925 | if (i == 1000) |
926 | return -EIO; // TODO: better error value |
927 | |
928 | /* set "initialization complete" bit to move adapter to |
929 | * D0 state */ |
930 | write_register(dev: priv->net_dev, IPW_REG_GP_CNTRL, |
931 | IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE); |
932 | |
933 | /* wait for clock stabilization */ |
934 | for (i = 0; i < 10000; i++) { |
935 | udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4); |
936 | |
937 | /* check clock ready bit */ |
938 | read_register(dev: priv->net_dev, IPW_REG_GP_CNTRL, val: &r); |
939 | if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY) |
940 | break; |
941 | } |
942 | |
943 | if (i == 10000) |
944 | return -EIO; /* TODO: better error value */ |
945 | |
946 | /* set D0 standby bit */ |
947 | read_register(dev: priv->net_dev, IPW_REG_GP_CNTRL, val: &r); |
948 | write_register(dev: priv->net_dev, IPW_REG_GP_CNTRL, |
949 | val: r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY); |
950 | |
951 | return 0; |
952 | } |
953 | |
954 | /********************************************************************* |
955 | Procedure : ipw2100_download_firmware |
956 | Purpose : Initiaze adapter after power on. |
957 | The sequence is: |
958 | 1. assert s/w reset first! |
959 | 2. awake clocks & wait for clock stabilization |
960 | 3. hold ARC (don't ask me why...) |
961 | 4. load Dino ucode and reset/clock init again |
962 | 5. zero-out shared mem |
963 | 6. download f/w |
964 | *******************************************************************/ |
965 | static int ipw2100_download_firmware(struct ipw2100_priv *priv) |
966 | { |
967 | u32 address; |
968 | int err; |
969 | |
970 | #ifndef CONFIG_PM |
971 | /* Fetch the firmware and microcode */ |
972 | struct ipw2100_fw ipw2100_firmware; |
973 | #endif |
974 | |
975 | if (priv->fatal_error) { |
976 | IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after " |
977 | "fatal error %d. Interface must be brought down.\n" , |
978 | priv->net_dev->name, priv->fatal_error); |
979 | return -EINVAL; |
980 | } |
981 | #ifdef CONFIG_PM |
982 | if (!ipw2100_firmware.version) { |
983 | err = ipw2100_get_firmware(priv, fw: &ipw2100_firmware); |
984 | if (err) { |
985 | IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n" , |
986 | priv->net_dev->name, err); |
987 | priv->fatal_error = IPW2100_ERR_FW_LOAD; |
988 | goto fail; |
989 | } |
990 | } |
991 | #else |
992 | err = ipw2100_get_firmware(priv, &ipw2100_firmware); |
993 | if (err) { |
994 | IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n" , |
995 | priv->net_dev->name, err); |
996 | priv->fatal_error = IPW2100_ERR_FW_LOAD; |
997 | goto fail; |
998 | } |
999 | #endif |
1000 | priv->firmware_version = ipw2100_firmware.version; |
1001 | |
1002 | /* s/w reset and clock stabilization */ |
1003 | err = sw_reset_and_clock(priv); |
1004 | if (err) { |
1005 | IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n" , |
1006 | priv->net_dev->name, err); |
1007 | goto fail; |
1008 | } |
1009 | |
1010 | err = ipw2100_verify(priv); |
1011 | if (err) { |
1012 | IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n" , |
1013 | priv->net_dev->name, err); |
1014 | goto fail; |
1015 | } |
1016 | |
1017 | /* Hold ARC */ |
1018 | write_nic_dword(dev: priv->net_dev, |
1019 | IPW_INTERNAL_REGISTER_HALT_AND_RESET, val: 0x80000000); |
1020 | |
1021 | /* allow ARC to run */ |
1022 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, val: 0); |
1023 | |
1024 | /* load microcode */ |
1025 | err = ipw2100_ucode_download(priv, fw: &ipw2100_firmware); |
1026 | if (err) { |
1027 | printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n" , |
1028 | priv->net_dev->name, err); |
1029 | goto fail; |
1030 | } |
1031 | |
1032 | /* release ARC */ |
1033 | write_nic_dword(dev: priv->net_dev, |
1034 | IPW_INTERNAL_REGISTER_HALT_AND_RESET, val: 0x00000000); |
1035 | |
1036 | /* s/w reset and clock stabilization (again!!!) */ |
1037 | err = sw_reset_and_clock(priv); |
1038 | if (err) { |
1039 | printk(KERN_ERR DRV_NAME |
1040 | ": %s: sw_reset_and_clock failed: %d\n" , |
1041 | priv->net_dev->name, err); |
1042 | goto fail; |
1043 | } |
1044 | |
1045 | /* load f/w */ |
1046 | err = ipw2100_fw_download(priv, fw: &ipw2100_firmware); |
1047 | if (err) { |
1048 | IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n" , |
1049 | priv->net_dev->name, err); |
1050 | goto fail; |
1051 | } |
1052 | #ifndef CONFIG_PM |
1053 | /* |
1054 | * When the .resume method of the driver is called, the other |
1055 | * part of the system, i.e. the ide driver could still stay in |
1056 | * the suspend stage. This prevents us from loading the firmware |
1057 | * from the disk. --YZ |
1058 | */ |
1059 | |
1060 | /* free any storage allocated for firmware image */ |
1061 | ipw2100_release_firmware(priv, &ipw2100_firmware); |
1062 | #endif |
1063 | |
1064 | /* zero out Domain 1 area indirectly (Si requirement) */ |
1065 | for (address = IPW_HOST_FW_SHARED_AREA0; |
1066 | address < IPW_HOST_FW_SHARED_AREA0_END; address += 4) |
1067 | write_nic_dword(dev: priv->net_dev, addr: address, val: 0); |
1068 | for (address = IPW_HOST_FW_SHARED_AREA1; |
1069 | address < IPW_HOST_FW_SHARED_AREA1_END; address += 4) |
1070 | write_nic_dword(dev: priv->net_dev, addr: address, val: 0); |
1071 | for (address = IPW_HOST_FW_SHARED_AREA2; |
1072 | address < IPW_HOST_FW_SHARED_AREA2_END; address += 4) |
1073 | write_nic_dword(dev: priv->net_dev, addr: address, val: 0); |
1074 | for (address = IPW_HOST_FW_SHARED_AREA3; |
1075 | address < IPW_HOST_FW_SHARED_AREA3_END; address += 4) |
1076 | write_nic_dword(dev: priv->net_dev, addr: address, val: 0); |
1077 | for (address = IPW_HOST_FW_INTERRUPT_AREA; |
1078 | address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4) |
1079 | write_nic_dword(dev: priv->net_dev, addr: address, val: 0); |
1080 | |
1081 | return 0; |
1082 | |
1083 | fail: |
1084 | ipw2100_release_firmware(priv, fw: &ipw2100_firmware); |
1085 | return err; |
1086 | } |
1087 | |
1088 | static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv) |
1089 | { |
1090 | if (priv->status & STATUS_INT_ENABLED) |
1091 | return; |
1092 | priv->status |= STATUS_INT_ENABLED; |
1093 | write_register(dev: priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK); |
1094 | } |
1095 | |
1096 | static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv) |
1097 | { |
1098 | if (!(priv->status & STATUS_INT_ENABLED)) |
1099 | return; |
1100 | priv->status &= ~STATUS_INT_ENABLED; |
1101 | write_register(dev: priv->net_dev, IPW_REG_INTA_MASK, val: 0x0); |
1102 | } |
1103 | |
1104 | static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv) |
1105 | { |
1106 | struct ipw2100_ordinals *ord = &priv->ordinals; |
1107 | |
1108 | IPW_DEBUG_INFO("enter\n" ); |
1109 | |
1110 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1, |
1111 | val: &ord->table1_addr); |
1112 | |
1113 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2, |
1114 | val: &ord->table2_addr); |
1115 | |
1116 | read_nic_dword(dev: priv->net_dev, addr: ord->table1_addr, val: &ord->table1_size); |
1117 | read_nic_dword(dev: priv->net_dev, addr: ord->table2_addr, val: &ord->table2_size); |
1118 | |
1119 | ord->table2_size &= 0x0000FFFF; |
1120 | |
1121 | IPW_DEBUG_INFO("table 1 size: %d\n" , ord->table1_size); |
1122 | IPW_DEBUG_INFO("table 2 size: %d\n" , ord->table2_size); |
1123 | IPW_DEBUG_INFO("exit\n" ); |
1124 | } |
1125 | |
1126 | static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv) |
1127 | { |
1128 | u32 reg = 0; |
1129 | /* |
1130 | * Set GPIO 3 writable by FW; GPIO 1 writable |
1131 | * by driver and enable clock |
1132 | */ |
1133 | reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE | |
1134 | IPW_BIT_GPIO_LED_OFF); |
1135 | write_register(dev: priv->net_dev, IPW_REG_GPIO, val: reg); |
1136 | } |
1137 | |
1138 | static int rf_kill_active(struct ipw2100_priv *priv) |
1139 | { |
1140 | #define MAX_RF_KILL_CHECKS 5 |
1141 | #define RF_KILL_CHECK_DELAY 40 |
1142 | |
1143 | unsigned short value = 0; |
1144 | u32 reg = 0; |
1145 | int i; |
1146 | |
1147 | if (!(priv->hw_features & HW_FEATURE_RFKILL)) { |
1148 | wiphy_rfkill_set_hw_state(wiphy: priv->ieee->wdev.wiphy, blocked: false); |
1149 | priv->status &= ~STATUS_RF_KILL_HW; |
1150 | return 0; |
1151 | } |
1152 | |
1153 | for (i = 0; i < MAX_RF_KILL_CHECKS; i++) { |
1154 | udelay(RF_KILL_CHECK_DELAY); |
1155 | read_register(dev: priv->net_dev, IPW_REG_GPIO, val: ®); |
1156 | value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1); |
1157 | } |
1158 | |
1159 | if (value == 0) { |
1160 | wiphy_rfkill_set_hw_state(wiphy: priv->ieee->wdev.wiphy, blocked: true); |
1161 | priv->status |= STATUS_RF_KILL_HW; |
1162 | } else { |
1163 | wiphy_rfkill_set_hw_state(wiphy: priv->ieee->wdev.wiphy, blocked: false); |
1164 | priv->status &= ~STATUS_RF_KILL_HW; |
1165 | } |
1166 | |
1167 | return (value == 0); |
1168 | } |
1169 | |
1170 | static int ipw2100_get_hw_features(struct ipw2100_priv *priv) |
1171 | { |
1172 | u32 addr, len; |
1173 | u32 val; |
1174 | |
1175 | /* |
1176 | * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1 |
1177 | */ |
1178 | len = sizeof(addr); |
1179 | if (ipw2100_get_ordinal |
1180 | (priv, ord: IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, val: &addr, len: &len)) { |
1181 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
1182 | __LINE__); |
1183 | return -EIO; |
1184 | } |
1185 | |
1186 | IPW_DEBUG_INFO("EEPROM address: %08X\n" , addr); |
1187 | |
1188 | /* |
1189 | * EEPROM version is the byte at offset 0xfd in firmware |
1190 | * We read 4 bytes, then shift out the byte we actually want */ |
1191 | read_nic_dword(dev: priv->net_dev, addr: addr + 0xFC, val: &val); |
1192 | priv->eeprom_version = (val >> 24) & 0xFF; |
1193 | IPW_DEBUG_INFO("EEPROM version: %d\n" , priv->eeprom_version); |
1194 | |
1195 | /* |
1196 | * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware |
1197 | * |
1198 | * notice that the EEPROM bit is reverse polarity, i.e. |
1199 | * bit = 0 signifies HW RF kill switch is supported |
1200 | * bit = 1 signifies HW RF kill switch is NOT supported |
1201 | */ |
1202 | read_nic_dword(dev: priv->net_dev, addr: addr + 0x20, val: &val); |
1203 | if (!((val >> 24) & 0x01)) |
1204 | priv->hw_features |= HW_FEATURE_RFKILL; |
1205 | |
1206 | IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n" , |
1207 | (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not " ); |
1208 | |
1209 | return 0; |
1210 | } |
1211 | |
1212 | /* |
1213 | * Start firmware execution after power on and initialization |
1214 | * The sequence is: |
1215 | * 1. Release ARC |
1216 | * 2. Wait for f/w initialization completes; |
1217 | */ |
1218 | static int ipw2100_start_adapter(struct ipw2100_priv *priv) |
1219 | { |
1220 | int i; |
1221 | u32 inta, inta_mask, gpio; |
1222 | |
1223 | IPW_DEBUG_INFO("enter\n" ); |
1224 | |
1225 | if (priv->status & STATUS_RUNNING) |
1226 | return 0; |
1227 | |
1228 | /* |
1229 | * Initialize the hw - drive adapter to DO state by setting |
1230 | * init_done bit. Wait for clk_ready bit and Download |
1231 | * fw & dino ucode |
1232 | */ |
1233 | if (ipw2100_download_firmware(priv)) { |
1234 | printk(KERN_ERR DRV_NAME |
1235 | ": %s: Failed to power on the adapter.\n" , |
1236 | priv->net_dev->name); |
1237 | return -EIO; |
1238 | } |
1239 | |
1240 | /* Clear the Tx, Rx and Msg queues and the r/w indexes |
1241 | * in the firmware RBD and TBD ring queue */ |
1242 | ipw2100_queues_initialize(priv); |
1243 | |
1244 | ipw2100_hw_set_gpio(priv); |
1245 | |
1246 | /* TODO -- Look at disabling interrupts here to make sure none |
1247 | * get fired during FW initialization */ |
1248 | |
1249 | /* Release ARC - clear reset bit */ |
1250 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, val: 0); |
1251 | |
1252 | /* wait for f/w initialization complete */ |
1253 | IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n" ); |
1254 | i = 5000; |
1255 | do { |
1256 | schedule_timeout_uninterruptible(timeout: msecs_to_jiffies(m: 40)); |
1257 | /* Todo... wait for sync command ... */ |
1258 | |
1259 | read_register(dev: priv->net_dev, IPW_REG_INTA, val: &inta); |
1260 | |
1261 | /* check "init done" bit */ |
1262 | if (inta & IPW2100_INTA_FW_INIT_DONE) { |
1263 | /* reset "init done" bit */ |
1264 | write_register(dev: priv->net_dev, IPW_REG_INTA, |
1265 | IPW2100_INTA_FW_INIT_DONE); |
1266 | break; |
1267 | } |
1268 | |
1269 | /* check error conditions : we check these after the firmware |
1270 | * check so that if there is an error, the interrupt handler |
1271 | * will see it and the adapter will be reset */ |
1272 | if (inta & |
1273 | (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) { |
1274 | /* clear error conditions */ |
1275 | write_register(dev: priv->net_dev, IPW_REG_INTA, |
1276 | IPW2100_INTA_FATAL_ERROR | |
1277 | IPW2100_INTA_PARITY_ERROR); |
1278 | } |
1279 | } while (--i); |
1280 | |
1281 | /* Clear out any pending INTAs since we aren't supposed to have |
1282 | * interrupts enabled at this point... */ |
1283 | read_register(dev: priv->net_dev, IPW_REG_INTA, val: &inta); |
1284 | read_register(dev: priv->net_dev, IPW_REG_INTA_MASK, val: &inta_mask); |
1285 | inta &= IPW_INTERRUPT_MASK; |
1286 | /* Clear out any pending interrupts */ |
1287 | if (inta & inta_mask) |
1288 | write_register(dev: priv->net_dev, IPW_REG_INTA, val: inta); |
1289 | |
1290 | IPW_DEBUG_FW("f/w initialization complete: %s\n" , |
1291 | i ? "SUCCESS" : "FAILED" ); |
1292 | |
1293 | if (!i) { |
1294 | printk(KERN_WARNING DRV_NAME |
1295 | ": %s: Firmware did not initialize.\n" , |
1296 | priv->net_dev->name); |
1297 | return -EIO; |
1298 | } |
1299 | |
1300 | /* allow firmware to write to GPIO1 & GPIO3 */ |
1301 | read_register(dev: priv->net_dev, IPW_REG_GPIO, val: &gpio); |
1302 | |
1303 | gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK); |
1304 | |
1305 | write_register(dev: priv->net_dev, IPW_REG_GPIO, val: gpio); |
1306 | |
1307 | /* Ready to receive commands */ |
1308 | priv->status |= STATUS_RUNNING; |
1309 | |
1310 | /* The adapter has been reset; we are not associated */ |
1311 | priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED); |
1312 | |
1313 | IPW_DEBUG_INFO("exit\n" ); |
1314 | |
1315 | return 0; |
1316 | } |
1317 | |
1318 | static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv) |
1319 | { |
1320 | if (!priv->fatal_error) |
1321 | return; |
1322 | |
1323 | priv->fatal_errors[priv->fatal_index++] = priv->fatal_error; |
1324 | priv->fatal_index %= IPW2100_ERROR_QUEUE; |
1325 | priv->fatal_error = 0; |
1326 | } |
1327 | |
1328 | /* NOTE: Our interrupt is disabled when this method is called */ |
1329 | static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv) |
1330 | { |
1331 | u32 reg; |
1332 | int i; |
1333 | |
1334 | IPW_DEBUG_INFO("Power cycling the hardware.\n" ); |
1335 | |
1336 | ipw2100_hw_set_gpio(priv); |
1337 | |
1338 | /* Step 1. Stop Master Assert */ |
1339 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, |
1340 | IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
1341 | |
1342 | /* Step 2. Wait for stop Master Assert |
1343 | * (not more than 50us, otherwise ret error */ |
1344 | i = 5; |
1345 | do { |
1346 | udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
1347 | read_register(dev: priv->net_dev, IPW_REG_RESET_REG, val: ®); |
1348 | |
1349 | if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
1350 | break; |
1351 | } while (--i); |
1352 | |
1353 | priv->status &= ~STATUS_RESET_PENDING; |
1354 | |
1355 | if (!i) { |
1356 | IPW_DEBUG_INFO |
1357 | ("exit - waited too long for master assert stop\n" ); |
1358 | return -EIO; |
1359 | } |
1360 | |
1361 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, |
1362 | IPW_AUX_HOST_RESET_REG_SW_RESET); |
1363 | |
1364 | /* Reset any fatal_error conditions */ |
1365 | ipw2100_reset_fatalerror(priv); |
1366 | |
1367 | /* At this point, the adapter is now stopped and disabled */ |
1368 | priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING | |
1369 | STATUS_ASSOCIATED | STATUS_ENABLED); |
1370 | |
1371 | return 0; |
1372 | } |
1373 | |
1374 | /* |
1375 | * Send the CARD_DISABLE_PHY_OFF command to the card to disable it |
1376 | * |
1377 | * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent. |
1378 | * |
1379 | * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of |
1380 | * if STATUS_ASSN_LOST is sent. |
1381 | */ |
1382 | static int ipw2100_hw_phy_off(struct ipw2100_priv *priv) |
1383 | { |
1384 | |
1385 | #define HW_PHY_OFF_LOOP_DELAY (msecs_to_jiffies(50)) |
1386 | |
1387 | struct host_command cmd = { |
1388 | .host_command = CARD_DISABLE_PHY_OFF, |
1389 | .host_command_sequence = 0, |
1390 | .host_command_length = 0, |
1391 | }; |
1392 | int err, i; |
1393 | u32 val1, val2; |
1394 | |
1395 | IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n" ); |
1396 | |
1397 | /* Turn off the radio */ |
1398 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1399 | if (err) |
1400 | return err; |
1401 | |
1402 | for (i = 0; i < 2500; i++) { |
1403 | read_nic_dword(dev: priv->net_dev, IPW2100_CONTROL_REG, val: &val1); |
1404 | read_nic_dword(dev: priv->net_dev, IPW2100_COMMAND, val: &val2); |
1405 | |
1406 | if ((val1 & IPW2100_CONTROL_PHY_OFF) && |
1407 | (val2 & IPW2100_COMMAND_PHY_OFF)) |
1408 | return 0; |
1409 | |
1410 | schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY); |
1411 | } |
1412 | |
1413 | return -EIO; |
1414 | } |
1415 | |
1416 | static int ipw2100_enable_adapter(struct ipw2100_priv *priv) |
1417 | { |
1418 | struct host_command cmd = { |
1419 | .host_command = HOST_COMPLETE, |
1420 | .host_command_sequence = 0, |
1421 | .host_command_length = 0 |
1422 | }; |
1423 | int err = 0; |
1424 | |
1425 | IPW_DEBUG_HC("HOST_COMPLETE\n" ); |
1426 | |
1427 | if (priv->status & STATUS_ENABLED) |
1428 | return 0; |
1429 | |
1430 | mutex_lock(&priv->adapter_mutex); |
1431 | |
1432 | if (rf_kill_active(priv)) { |
1433 | IPW_DEBUG_HC("Command aborted due to RF kill active.\n" ); |
1434 | goto fail_up; |
1435 | } |
1436 | |
1437 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1438 | if (err) { |
1439 | IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n" ); |
1440 | goto fail_up; |
1441 | } |
1442 | |
1443 | err = ipw2100_wait_for_card_state(priv, state: IPW_HW_STATE_ENABLED); |
1444 | if (err) { |
1445 | IPW_DEBUG_INFO("%s: card not responding to init command.\n" , |
1446 | priv->net_dev->name); |
1447 | goto fail_up; |
1448 | } |
1449 | |
1450 | if (priv->stop_hang_check) { |
1451 | priv->stop_hang_check = 0; |
1452 | schedule_delayed_work(dwork: &priv->hang_check, HZ / 2); |
1453 | } |
1454 | |
1455 | fail_up: |
1456 | mutex_unlock(lock: &priv->adapter_mutex); |
1457 | return err; |
1458 | } |
1459 | |
1460 | static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv) |
1461 | { |
1462 | #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100)) |
1463 | |
1464 | struct host_command cmd = { |
1465 | .host_command = HOST_PRE_POWER_DOWN, |
1466 | .host_command_sequence = 0, |
1467 | .host_command_length = 0, |
1468 | }; |
1469 | int err, i; |
1470 | u32 reg; |
1471 | |
1472 | if (!(priv->status & STATUS_RUNNING)) |
1473 | return 0; |
1474 | |
1475 | priv->status |= STATUS_STOPPING; |
1476 | |
1477 | /* We can only shut down the card if the firmware is operational. So, |
1478 | * if we haven't reset since a fatal_error, then we can not send the |
1479 | * shutdown commands. */ |
1480 | if (!priv->fatal_error) { |
1481 | /* First, make sure the adapter is enabled so that the PHY_OFF |
1482 | * command can shut it down */ |
1483 | ipw2100_enable_adapter(priv); |
1484 | |
1485 | err = ipw2100_hw_phy_off(priv); |
1486 | if (err) |
1487 | printk(KERN_WARNING DRV_NAME |
1488 | ": Error disabling radio %d\n" , err); |
1489 | |
1490 | /* |
1491 | * If in D0-standby mode going directly to D3 may cause a |
1492 | * PCI bus violation. Therefore we must change out of the D0 |
1493 | * state. |
1494 | * |
1495 | * Sending the PREPARE_FOR_POWER_DOWN will restrict the |
1496 | * hardware from going into standby mode and will transition |
1497 | * out of D0-standby if it is already in that state. |
1498 | * |
1499 | * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the |
1500 | * driver upon completion. Once received, the driver can |
1501 | * proceed to the D3 state. |
1502 | * |
1503 | * Prepare for power down command to fw. This command would |
1504 | * take HW out of D0-standby and prepare it for D3 state. |
1505 | * |
1506 | * Currently FW does not support event notification for this |
1507 | * event. Therefore, skip waiting for it. Just wait a fixed |
1508 | * 100ms |
1509 | */ |
1510 | IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n" ); |
1511 | |
1512 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1513 | if (err) |
1514 | printk(KERN_WARNING DRV_NAME ": " |
1515 | "%s: Power down command failed: Error %d\n" , |
1516 | priv->net_dev->name, err); |
1517 | else |
1518 | schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY); |
1519 | } |
1520 | |
1521 | priv->status &= ~STATUS_ENABLED; |
1522 | |
1523 | /* |
1524 | * Set GPIO 3 writable by FW; GPIO 1 writable |
1525 | * by driver and enable clock |
1526 | */ |
1527 | ipw2100_hw_set_gpio(priv); |
1528 | |
1529 | /* |
1530 | * Power down adapter. Sequence: |
1531 | * 1. Stop master assert (RESET_REG[9]=1) |
1532 | * 2. Wait for stop master (RESET_REG[8]==1) |
1533 | * 3. S/w reset assert (RESET_REG[7] = 1) |
1534 | */ |
1535 | |
1536 | /* Stop master assert */ |
1537 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, |
1538 | IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
1539 | |
1540 | /* wait stop master not more than 50 usec. |
1541 | * Otherwise return error. */ |
1542 | for (i = 5; i > 0; i--) { |
1543 | udelay(10); |
1544 | |
1545 | /* Check master stop bit */ |
1546 | read_register(dev: priv->net_dev, IPW_REG_RESET_REG, val: ®); |
1547 | |
1548 | if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
1549 | break; |
1550 | } |
1551 | |
1552 | if (i == 0) |
1553 | printk(KERN_WARNING DRV_NAME |
1554 | ": %s: Could now power down adapter.\n" , |
1555 | priv->net_dev->name); |
1556 | |
1557 | /* assert s/w reset */ |
1558 | write_register(dev: priv->net_dev, IPW_REG_RESET_REG, |
1559 | IPW_AUX_HOST_RESET_REG_SW_RESET); |
1560 | |
1561 | priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING); |
1562 | |
1563 | return 0; |
1564 | } |
1565 | |
1566 | static int ipw2100_disable_adapter(struct ipw2100_priv *priv) |
1567 | { |
1568 | struct host_command cmd = { |
1569 | .host_command = CARD_DISABLE, |
1570 | .host_command_sequence = 0, |
1571 | .host_command_length = 0 |
1572 | }; |
1573 | int err = 0; |
1574 | |
1575 | IPW_DEBUG_HC("CARD_DISABLE\n" ); |
1576 | |
1577 | if (!(priv->status & STATUS_ENABLED)) |
1578 | return 0; |
1579 | |
1580 | /* Make sure we clear the associated state */ |
1581 | priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
1582 | |
1583 | if (!priv->stop_hang_check) { |
1584 | priv->stop_hang_check = 1; |
1585 | cancel_delayed_work(dwork: &priv->hang_check); |
1586 | } |
1587 | |
1588 | mutex_lock(&priv->adapter_mutex); |
1589 | |
1590 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1591 | if (err) { |
1592 | printk(KERN_WARNING DRV_NAME |
1593 | ": exit - failed to send CARD_DISABLE command\n" ); |
1594 | goto fail_up; |
1595 | } |
1596 | |
1597 | err = ipw2100_wait_for_card_state(priv, state: IPW_HW_STATE_DISABLED); |
1598 | if (err) { |
1599 | printk(KERN_WARNING DRV_NAME |
1600 | ": exit - card failed to change to DISABLED\n" ); |
1601 | goto fail_up; |
1602 | } |
1603 | |
1604 | IPW_DEBUG_INFO("TODO: implement scan state machine\n" ); |
1605 | |
1606 | fail_up: |
1607 | mutex_unlock(lock: &priv->adapter_mutex); |
1608 | return err; |
1609 | } |
1610 | |
1611 | static int ipw2100_set_scan_options(struct ipw2100_priv *priv) |
1612 | { |
1613 | struct host_command cmd = { |
1614 | .host_command = SET_SCAN_OPTIONS, |
1615 | .host_command_sequence = 0, |
1616 | .host_command_length = 8 |
1617 | }; |
1618 | int err; |
1619 | |
1620 | IPW_DEBUG_INFO("enter\n" ); |
1621 | |
1622 | IPW_DEBUG_SCAN("setting scan options\n" ); |
1623 | |
1624 | cmd.host_command_parameters[0] = 0; |
1625 | |
1626 | if (!(priv->config & CFG_ASSOCIATE)) |
1627 | cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE; |
1628 | if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled) |
1629 | cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL; |
1630 | if (priv->config & CFG_PASSIVE_SCAN) |
1631 | cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE; |
1632 | |
1633 | cmd.host_command_parameters[1] = priv->channel_mask; |
1634 | |
1635 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1636 | |
1637 | IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n" , |
1638 | cmd.host_command_parameters[0]); |
1639 | |
1640 | return err; |
1641 | } |
1642 | |
1643 | static int ipw2100_start_scan(struct ipw2100_priv *priv) |
1644 | { |
1645 | struct host_command cmd = { |
1646 | .host_command = BROADCAST_SCAN, |
1647 | .host_command_sequence = 0, |
1648 | .host_command_length = 4 |
1649 | }; |
1650 | int err; |
1651 | |
1652 | IPW_DEBUG_HC("START_SCAN\n" ); |
1653 | |
1654 | cmd.host_command_parameters[0] = 0; |
1655 | |
1656 | /* No scanning if in monitor mode */ |
1657 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
1658 | return 1; |
1659 | |
1660 | if (priv->status & STATUS_SCANNING) { |
1661 | IPW_DEBUG_SCAN("Scan requested while already in scan...\n" ); |
1662 | return 0; |
1663 | } |
1664 | |
1665 | IPW_DEBUG_INFO("enter\n" ); |
1666 | |
1667 | /* Not clearing here; doing so makes iwlist always return nothing... |
1668 | * |
1669 | * We should modify the table logic to use aging tables vs. clearing |
1670 | * the table on each scan start. |
1671 | */ |
1672 | IPW_DEBUG_SCAN("starting scan\n" ); |
1673 | |
1674 | priv->status |= STATUS_SCANNING; |
1675 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
1676 | if (err) |
1677 | priv->status &= ~STATUS_SCANNING; |
1678 | |
1679 | IPW_DEBUG_INFO("exit\n" ); |
1680 | |
1681 | return err; |
1682 | } |
1683 | |
1684 | static const struct libipw_geo ipw_geos[] = { |
1685 | { /* Restricted */ |
1686 | "---" , |
1687 | .bg_channels = 14, |
1688 | .bg = {{2412, 1}, {2417, 2}, {2422, 3}, |
1689 | {2427, 4}, {2432, 5}, {2437, 6}, |
1690 | {2442, 7}, {2447, 8}, {2452, 9}, |
1691 | {2457, 10}, {2462, 11}, {2467, 12}, |
1692 | {2472, 13}, {2484, 14}}, |
1693 | }, |
1694 | }; |
1695 | |
1696 | static int ipw2100_up(struct ipw2100_priv *priv, int deferred) |
1697 | { |
1698 | unsigned long flags; |
1699 | int err = 0; |
1700 | u32 lock; |
1701 | u32 ord_len = sizeof(lock); |
1702 | |
1703 | /* Age scan list entries found before suspend */ |
1704 | if (priv->suspend_time) { |
1705 | libipw_networks_age(ieee: priv->ieee, age_secs: priv->suspend_time); |
1706 | priv->suspend_time = 0; |
1707 | } |
1708 | |
1709 | /* Quiet if manually disabled. */ |
1710 | if (priv->status & STATUS_RF_KILL_SW) { |
1711 | IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable " |
1712 | "switch\n" , priv->net_dev->name); |
1713 | return 0; |
1714 | } |
1715 | |
1716 | /* the ipw2100 hardware really doesn't want power management delays |
1717 | * longer than 175usec |
1718 | */ |
1719 | cpu_latency_qos_update_request(req: &ipw2100_pm_qos_req, new_value: 175); |
1720 | |
1721 | /* If the interrupt is enabled, turn it off... */ |
1722 | spin_lock_irqsave(&priv->low_lock, flags); |
1723 | ipw2100_disable_interrupts(priv); |
1724 | |
1725 | /* Reset any fatal_error conditions */ |
1726 | ipw2100_reset_fatalerror(priv); |
1727 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
1728 | |
1729 | if (priv->status & STATUS_POWERED || |
1730 | (priv->status & STATUS_RESET_PENDING)) { |
1731 | /* Power cycle the card ... */ |
1732 | err = ipw2100_power_cycle_adapter(priv); |
1733 | if (err) { |
1734 | printk(KERN_WARNING DRV_NAME |
1735 | ": %s: Could not cycle adapter.\n" , |
1736 | priv->net_dev->name); |
1737 | goto exit; |
1738 | } |
1739 | } else |
1740 | priv->status |= STATUS_POWERED; |
1741 | |
1742 | /* Load the firmware, start the clocks, etc. */ |
1743 | err = ipw2100_start_adapter(priv); |
1744 | if (err) { |
1745 | printk(KERN_ERR DRV_NAME |
1746 | ": %s: Failed to start the firmware.\n" , |
1747 | priv->net_dev->name); |
1748 | goto exit; |
1749 | } |
1750 | |
1751 | ipw2100_initialize_ordinals(priv); |
1752 | |
1753 | /* Determine capabilities of this particular HW configuration */ |
1754 | err = ipw2100_get_hw_features(priv); |
1755 | if (err) { |
1756 | printk(KERN_ERR DRV_NAME |
1757 | ": %s: Failed to determine HW features.\n" , |
1758 | priv->net_dev->name); |
1759 | goto exit; |
1760 | } |
1761 | |
1762 | /* Initialize the geo */ |
1763 | libipw_set_geo(ieee: priv->ieee, geo: &ipw_geos[0]); |
1764 | priv->ieee->freq_band = LIBIPW_24GHZ_BAND; |
1765 | |
1766 | lock = LOCK_NONE; |
1767 | err = ipw2100_set_ordinal(priv, ord: IPW_ORD_PERS_DB_LOCK, val: &lock, len: &ord_len); |
1768 | if (err) { |
1769 | printk(KERN_ERR DRV_NAME |
1770 | ": %s: Failed to clear ordinal lock.\n" , |
1771 | priv->net_dev->name); |
1772 | goto exit; |
1773 | } |
1774 | |
1775 | priv->status &= ~STATUS_SCANNING; |
1776 | |
1777 | if (rf_kill_active(priv)) { |
1778 | printk(KERN_INFO "%s: Radio is disabled by RF switch.\n" , |
1779 | priv->net_dev->name); |
1780 | |
1781 | if (priv->stop_rf_kill) { |
1782 | priv->stop_rf_kill = 0; |
1783 | schedule_delayed_work(dwork: &priv->rf_kill, |
1784 | delay: round_jiffies_relative(HZ)); |
1785 | } |
1786 | |
1787 | deferred = 1; |
1788 | } |
1789 | |
1790 | /* Turn on the interrupt so that commands can be processed */ |
1791 | ipw2100_enable_interrupts(priv); |
1792 | |
1793 | /* Send all of the commands that must be sent prior to |
1794 | * HOST_COMPLETE */ |
1795 | err = ipw2100_adapter_setup(priv); |
1796 | if (err) { |
1797 | printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n" , |
1798 | priv->net_dev->name); |
1799 | goto exit; |
1800 | } |
1801 | |
1802 | if (!deferred) { |
1803 | /* Enable the adapter - sends HOST_COMPLETE */ |
1804 | err = ipw2100_enable_adapter(priv); |
1805 | if (err) { |
1806 | printk(KERN_ERR DRV_NAME ": " |
1807 | "%s: failed in call to enable adapter.\n" , |
1808 | priv->net_dev->name); |
1809 | ipw2100_hw_stop_adapter(priv); |
1810 | goto exit; |
1811 | } |
1812 | |
1813 | /* Start a scan . . . */ |
1814 | ipw2100_set_scan_options(priv); |
1815 | ipw2100_start_scan(priv); |
1816 | } |
1817 | |
1818 | exit: |
1819 | return err; |
1820 | } |
1821 | |
1822 | static void ipw2100_down(struct ipw2100_priv *priv) |
1823 | { |
1824 | unsigned long flags; |
1825 | union iwreq_data wrqu = { |
1826 | .ap_addr = { |
1827 | .sa_family = ARPHRD_ETHER} |
1828 | }; |
1829 | int associated = priv->status & STATUS_ASSOCIATED; |
1830 | |
1831 | /* Kill the RF switch timer */ |
1832 | if (!priv->stop_rf_kill) { |
1833 | priv->stop_rf_kill = 1; |
1834 | cancel_delayed_work(dwork: &priv->rf_kill); |
1835 | } |
1836 | |
1837 | /* Kill the firmware hang check timer */ |
1838 | if (!priv->stop_hang_check) { |
1839 | priv->stop_hang_check = 1; |
1840 | cancel_delayed_work(dwork: &priv->hang_check); |
1841 | } |
1842 | |
1843 | /* Kill any pending resets */ |
1844 | if (priv->status & STATUS_RESET_PENDING) |
1845 | cancel_delayed_work(dwork: &priv->reset_work); |
1846 | |
1847 | /* Make sure the interrupt is on so that FW commands will be |
1848 | * processed correctly */ |
1849 | spin_lock_irqsave(&priv->low_lock, flags); |
1850 | ipw2100_enable_interrupts(priv); |
1851 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
1852 | |
1853 | if (ipw2100_hw_stop_adapter(priv)) |
1854 | printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n" , |
1855 | priv->net_dev->name); |
1856 | |
1857 | /* Do not disable the interrupt until _after_ we disable |
1858 | * the adaptor. Otherwise the CARD_DISABLE command will never |
1859 | * be ack'd by the firmware */ |
1860 | spin_lock_irqsave(&priv->low_lock, flags); |
1861 | ipw2100_disable_interrupts(priv); |
1862 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
1863 | |
1864 | cpu_latency_qos_update_request(req: &ipw2100_pm_qos_req, |
1865 | PM_QOS_DEFAULT_VALUE); |
1866 | |
1867 | /* We have to signal any supplicant if we are disassociating */ |
1868 | if (associated) |
1869 | wireless_send_event(dev: priv->net_dev, SIOCGIWAP, wrqu: &wrqu, NULL); |
1870 | |
1871 | priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
1872 | netif_carrier_off(dev: priv->net_dev); |
1873 | netif_stop_queue(dev: priv->net_dev); |
1874 | } |
1875 | |
1876 | static int ipw2100_wdev_init(struct net_device *dev) |
1877 | { |
1878 | struct ipw2100_priv *priv = libipw_priv(dev); |
1879 | const struct libipw_geo *geo = libipw_get_geo(ieee: priv->ieee); |
1880 | struct wireless_dev *wdev = &priv->ieee->wdev; |
1881 | int i; |
1882 | |
1883 | memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); |
1884 | |
1885 | /* fill-out priv->ieee->bg_band */ |
1886 | if (geo->bg_channels) { |
1887 | struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; |
1888 | |
1889 | bg_band->band = NL80211_BAND_2GHZ; |
1890 | bg_band->n_channels = geo->bg_channels; |
1891 | bg_band->channels = kcalloc(n: geo->bg_channels, |
1892 | size: sizeof(struct ieee80211_channel), |
1893 | GFP_KERNEL); |
1894 | if (!bg_band->channels) { |
1895 | ipw2100_down(priv); |
1896 | return -ENOMEM; |
1897 | } |
1898 | /* translate geo->bg to bg_band.channels */ |
1899 | for (i = 0; i < geo->bg_channels; i++) { |
1900 | bg_band->channels[i].band = NL80211_BAND_2GHZ; |
1901 | bg_band->channels[i].center_freq = geo->bg[i].freq; |
1902 | bg_band->channels[i].hw_value = geo->bg[i].channel; |
1903 | bg_band->channels[i].max_power = geo->bg[i].max_power; |
1904 | if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) |
1905 | bg_band->channels[i].flags |= |
1906 | IEEE80211_CHAN_NO_IR; |
1907 | if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) |
1908 | bg_band->channels[i].flags |= |
1909 | IEEE80211_CHAN_NO_IR; |
1910 | if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) |
1911 | bg_band->channels[i].flags |= |
1912 | IEEE80211_CHAN_RADAR; |
1913 | /* No equivalent for LIBIPW_CH_80211H_RULES, |
1914 | LIBIPW_CH_UNIFORM_SPREADING, or |
1915 | LIBIPW_CH_B_ONLY... */ |
1916 | } |
1917 | /* point at bitrate info */ |
1918 | bg_band->bitrates = ipw2100_bg_rates; |
1919 | bg_band->n_bitrates = RATE_COUNT; |
1920 | |
1921 | wdev->wiphy->bands[NL80211_BAND_2GHZ] = bg_band; |
1922 | } |
1923 | |
1924 | wdev->wiphy->cipher_suites = ipw_cipher_suites; |
1925 | wdev->wiphy->n_cipher_suites = ARRAY_SIZE(ipw_cipher_suites); |
1926 | |
1927 | set_wiphy_dev(wiphy: wdev->wiphy, dev: &priv->pci_dev->dev); |
1928 | if (wiphy_register(wiphy: wdev->wiphy)) |
1929 | return -EIO; |
1930 | return 0; |
1931 | } |
1932 | |
1933 | static void ipw2100_reset_adapter(struct work_struct *work) |
1934 | { |
1935 | struct ipw2100_priv *priv = |
1936 | container_of(work, struct ipw2100_priv, reset_work.work); |
1937 | unsigned long flags; |
1938 | union iwreq_data wrqu = { |
1939 | .ap_addr = { |
1940 | .sa_family = ARPHRD_ETHER} |
1941 | }; |
1942 | int associated = priv->status & STATUS_ASSOCIATED; |
1943 | |
1944 | spin_lock_irqsave(&priv->low_lock, flags); |
1945 | IPW_DEBUG_INFO(": %s: Restarting adapter.\n" , priv->net_dev->name); |
1946 | priv->resets++; |
1947 | priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
1948 | priv->status |= STATUS_SECURITY_UPDATED; |
1949 | |
1950 | /* Force a power cycle even if interface hasn't been opened |
1951 | * yet */ |
1952 | cancel_delayed_work(dwork: &priv->reset_work); |
1953 | priv->status |= STATUS_RESET_PENDING; |
1954 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
1955 | |
1956 | mutex_lock(&priv->action_mutex); |
1957 | /* stop timed checks so that they don't interfere with reset */ |
1958 | priv->stop_hang_check = 1; |
1959 | cancel_delayed_work(dwork: &priv->hang_check); |
1960 | |
1961 | /* We have to signal any supplicant if we are disassociating */ |
1962 | if (associated) |
1963 | wireless_send_event(dev: priv->net_dev, SIOCGIWAP, wrqu: &wrqu, NULL); |
1964 | |
1965 | ipw2100_up(priv, deferred: 0); |
1966 | mutex_unlock(lock: &priv->action_mutex); |
1967 | |
1968 | } |
1969 | |
1970 | static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status) |
1971 | { |
1972 | |
1973 | #define MAC_ASSOCIATION_READ_DELAY (HZ) |
1974 | int ret; |
1975 | unsigned int len, essid_len; |
1976 | char essid[IW_ESSID_MAX_SIZE]; |
1977 | u32 txrate; |
1978 | u32 chan; |
1979 | char *txratename; |
1980 | u8 bssid[ETH_ALEN]; |
1981 | |
1982 | /* |
1983 | * TBD: BSSID is usually 00:00:00:00:00:00 here and not |
1984 | * an actual MAC of the AP. Seems like FW sets this |
1985 | * address too late. Read it later and expose through |
1986 | * /proc or schedule a later task to query and update |
1987 | */ |
1988 | |
1989 | essid_len = IW_ESSID_MAX_SIZE; |
1990 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ASSN_SSID, |
1991 | val: essid, len: &essid_len); |
1992 | if (ret) { |
1993 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
1994 | __LINE__); |
1995 | return; |
1996 | } |
1997 | |
1998 | len = sizeof(u32); |
1999 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_CURRENT_TX_RATE, val: &txrate, len: &len); |
2000 | if (ret) { |
2001 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
2002 | __LINE__); |
2003 | return; |
2004 | } |
2005 | |
2006 | len = sizeof(u32); |
2007 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_OUR_FREQ, val: &chan, len: &len); |
2008 | if (ret) { |
2009 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
2010 | __LINE__); |
2011 | return; |
2012 | } |
2013 | len = ETH_ALEN; |
2014 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ASSN_AP_BSSID, val: bssid, |
2015 | len: &len); |
2016 | if (ret) { |
2017 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
2018 | __LINE__); |
2019 | return; |
2020 | } |
2021 | memcpy(priv->ieee->bssid, bssid, ETH_ALEN); |
2022 | |
2023 | switch (txrate) { |
2024 | case TX_RATE_1_MBIT: |
2025 | txratename = "1Mbps" ; |
2026 | break; |
2027 | case TX_RATE_2_MBIT: |
2028 | txratename = "2Mbsp" ; |
2029 | break; |
2030 | case TX_RATE_5_5_MBIT: |
2031 | txratename = "5.5Mbps" ; |
2032 | break; |
2033 | case TX_RATE_11_MBIT: |
2034 | txratename = "11Mbps" ; |
2035 | break; |
2036 | default: |
2037 | IPW_DEBUG_INFO("Unknown rate: %d\n" , txrate); |
2038 | txratename = "unknown rate" ; |
2039 | break; |
2040 | } |
2041 | |
2042 | IPW_DEBUG_INFO("%s: Associated with '%*pE' at %s, channel %d (BSSID=%pM)\n" , |
2043 | priv->net_dev->name, essid_len, essid, |
2044 | txratename, chan, bssid); |
2045 | |
2046 | /* now we copy read ssid into dev */ |
2047 | if (!(priv->config & CFG_STATIC_ESSID)) { |
2048 | priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE); |
2049 | memcpy(priv->essid, essid, priv->essid_len); |
2050 | } |
2051 | priv->channel = chan; |
2052 | memcpy(priv->bssid, bssid, ETH_ALEN); |
2053 | |
2054 | priv->status |= STATUS_ASSOCIATING; |
2055 | priv->connect_start = ktime_get_boottime_seconds(); |
2056 | |
2057 | schedule_delayed_work(dwork: &priv->wx_event_work, HZ / 10); |
2058 | } |
2059 | |
2060 | static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid, |
2061 | int length, int batch_mode) |
2062 | { |
2063 | int ssid_len = min(length, IW_ESSID_MAX_SIZE); |
2064 | struct host_command cmd = { |
2065 | .host_command = SSID, |
2066 | .host_command_sequence = 0, |
2067 | .host_command_length = ssid_len |
2068 | }; |
2069 | int err; |
2070 | |
2071 | IPW_DEBUG_HC("SSID: '%*pE'\n" , ssid_len, essid); |
2072 | |
2073 | if (ssid_len) |
2074 | memcpy(cmd.host_command_parameters, essid, ssid_len); |
2075 | |
2076 | if (!batch_mode) { |
2077 | err = ipw2100_disable_adapter(priv); |
2078 | if (err) |
2079 | return err; |
2080 | } |
2081 | |
2082 | /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to |
2083 | * disable auto association -- so we cheat by setting a bogus SSID */ |
2084 | if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) { |
2085 | int i; |
2086 | u8 *bogus = (u8 *) cmd.host_command_parameters; |
2087 | for (i = 0; i < IW_ESSID_MAX_SIZE; i++) |
2088 | bogus[i] = 0x18 + i; |
2089 | cmd.host_command_length = IW_ESSID_MAX_SIZE; |
2090 | } |
2091 | |
2092 | /* NOTE: We always send the SSID command even if the provided ESSID is |
2093 | * the same as what we currently think is set. */ |
2094 | |
2095 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
2096 | if (!err) { |
2097 | memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len); |
2098 | memcpy(priv->essid, essid, ssid_len); |
2099 | priv->essid_len = ssid_len; |
2100 | } |
2101 | |
2102 | if (!batch_mode) { |
2103 | if (ipw2100_enable_adapter(priv)) |
2104 | err = -EIO; |
2105 | } |
2106 | |
2107 | return err; |
2108 | } |
2109 | |
2110 | static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status) |
2111 | { |
2112 | IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC, |
2113 | "disassociated: '%*pE' %pM\n" , priv->essid_len, priv->essid, |
2114 | priv->bssid); |
2115 | |
2116 | priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); |
2117 | |
2118 | if (priv->status & STATUS_STOPPING) { |
2119 | IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n" ); |
2120 | return; |
2121 | } |
2122 | |
2123 | eth_zero_addr(addr: priv->bssid); |
2124 | eth_zero_addr(addr: priv->ieee->bssid); |
2125 | |
2126 | netif_carrier_off(dev: priv->net_dev); |
2127 | netif_stop_queue(dev: priv->net_dev); |
2128 | |
2129 | if (!(priv->status & STATUS_RUNNING)) |
2130 | return; |
2131 | |
2132 | if (priv->status & STATUS_SECURITY_UPDATED) |
2133 | schedule_delayed_work(dwork: &priv->security_work, delay: 0); |
2134 | |
2135 | schedule_delayed_work(dwork: &priv->wx_event_work, delay: 0); |
2136 | } |
2137 | |
2138 | static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) |
2139 | { |
2140 | IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n" , |
2141 | priv->net_dev->name); |
2142 | |
2143 | /* RF_KILL is now enabled (else we wouldn't be here) */ |
2144 | wiphy_rfkill_set_hw_state(wiphy: priv->ieee->wdev.wiphy, blocked: true); |
2145 | priv->status |= STATUS_RF_KILL_HW; |
2146 | |
2147 | /* Make sure the RF Kill check timer is running */ |
2148 | priv->stop_rf_kill = 0; |
2149 | mod_delayed_work(wq: system_wq, dwork: &priv->rf_kill, delay: round_jiffies_relative(HZ)); |
2150 | } |
2151 | |
2152 | static void ipw2100_scan_event(struct work_struct *work) |
2153 | { |
2154 | struct ipw2100_priv *priv = container_of(work, struct ipw2100_priv, |
2155 | scan_event.work); |
2156 | union iwreq_data wrqu; |
2157 | |
2158 | wrqu.data.length = 0; |
2159 | wrqu.data.flags = 0; |
2160 | wireless_send_event(dev: priv->net_dev, SIOCGIWSCAN, wrqu: &wrqu, NULL); |
2161 | } |
2162 | |
2163 | static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) |
2164 | { |
2165 | IPW_DEBUG_SCAN("scan complete\n" ); |
2166 | /* Age the scan results... */ |
2167 | priv->ieee->scans++; |
2168 | priv->status &= ~STATUS_SCANNING; |
2169 | |
2170 | /* Only userspace-requested scan completion events go out immediately */ |
2171 | if (!priv->user_requested_scan) { |
2172 | schedule_delayed_work(dwork: &priv->scan_event, |
2173 | delay: round_jiffies_relative(j: msecs_to_jiffies(m: 4000))); |
2174 | } else { |
2175 | priv->user_requested_scan = 0; |
2176 | mod_delayed_work(wq: system_wq, dwork: &priv->scan_event, delay: 0); |
2177 | } |
2178 | } |
2179 | |
2180 | #ifdef CONFIG_IPW2100_DEBUG |
2181 | #define IPW2100_HANDLER(v, f) { v, f, # v } |
2182 | struct ipw2100_status_indicator { |
2183 | int status; |
2184 | void (*cb) (struct ipw2100_priv * priv, u32 status); |
2185 | char *name; |
2186 | }; |
2187 | #else |
2188 | #define IPW2100_HANDLER(v, f) { v, f } |
2189 | struct ipw2100_status_indicator { |
2190 | int status; |
2191 | void (*cb) (struct ipw2100_priv * priv, u32 status); |
2192 | }; |
2193 | #endif /* CONFIG_IPW2100_DEBUG */ |
2194 | |
2195 | static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status) |
2196 | { |
2197 | IPW_DEBUG_SCAN("Scanning...\n" ); |
2198 | priv->status |= STATUS_SCANNING; |
2199 | } |
2200 | |
2201 | static const struct ipw2100_status_indicator status_handlers[] = { |
2202 | IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL), |
2203 | IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL), |
2204 | IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated), |
2205 | IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost), |
2206 | IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL), |
2207 | IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete), |
2208 | IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL), |
2209 | IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL), |
2210 | IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill), |
2211 | IPW2100_HANDLER(IPW_STATE_DISABLED, NULL), |
2212 | IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL), |
2213 | IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning), |
2214 | IPW2100_HANDLER(-1, NULL) |
2215 | }; |
2216 | |
2217 | static void isr_status_change(struct ipw2100_priv *priv, int status) |
2218 | { |
2219 | int i; |
2220 | |
2221 | if (status == IPW_STATE_SCANNING && |
2222 | priv->status & STATUS_ASSOCIATED && |
2223 | !(priv->status & STATUS_SCANNING)) { |
2224 | IPW_DEBUG_INFO("Scan detected while associated, with " |
2225 | "no scan request. Restarting firmware.\n" ); |
2226 | |
2227 | /* Wake up any sleeping jobs */ |
2228 | schedule_reset(priv); |
2229 | } |
2230 | |
2231 | for (i = 0; status_handlers[i].status != -1; i++) { |
2232 | if (status == status_handlers[i].status) { |
2233 | IPW_DEBUG_NOTIF("Status change: %s\n" , |
2234 | status_handlers[i].name); |
2235 | if (status_handlers[i].cb) |
2236 | status_handlers[i].cb(priv, status); |
2237 | priv->wstats.status = status; |
2238 | return; |
2239 | } |
2240 | } |
2241 | |
2242 | IPW_DEBUG_NOTIF("unknown status received: %04x\n" , status); |
2243 | } |
2244 | |
2245 | static void isr_rx_complete_command(struct ipw2100_priv *priv, |
2246 | struct ipw2100_cmd_header *cmd) |
2247 | { |
2248 | #ifdef CONFIG_IPW2100_DEBUG |
2249 | if (cmd->host_command_reg < ARRAY_SIZE(command_types)) { |
2250 | IPW_DEBUG_HC("Command completed '%s (%d)'\n" , |
2251 | command_types[cmd->host_command_reg], |
2252 | cmd->host_command_reg); |
2253 | } |
2254 | #endif |
2255 | if (cmd->host_command_reg == HOST_COMPLETE) |
2256 | priv->status |= STATUS_ENABLED; |
2257 | |
2258 | if (cmd->host_command_reg == CARD_DISABLE) |
2259 | priv->status &= ~STATUS_ENABLED; |
2260 | |
2261 | priv->status &= ~STATUS_CMD_ACTIVE; |
2262 | |
2263 | wake_up_interruptible(&priv->wait_command_queue); |
2264 | } |
2265 | |
2266 | #ifdef CONFIG_IPW2100_DEBUG |
2267 | static const char *frame_types[] = { |
2268 | "COMMAND_STATUS_VAL" , |
2269 | "STATUS_CHANGE_VAL" , |
2270 | "P80211_DATA_VAL" , |
2271 | "P8023_DATA_VAL" , |
2272 | "HOST_NOTIFICATION_VAL" |
2273 | }; |
2274 | #endif |
2275 | |
2276 | static int ipw2100_alloc_skb(struct ipw2100_priv *priv, |
2277 | struct ipw2100_rx_packet *packet) |
2278 | { |
2279 | packet->skb = dev_alloc_skb(length: sizeof(struct ipw2100_rx)); |
2280 | if (!packet->skb) |
2281 | return -ENOMEM; |
2282 | |
2283 | packet->rxp = (struct ipw2100_rx *)packet->skb->data; |
2284 | packet->dma_addr = dma_map_single(&priv->pci_dev->dev, |
2285 | packet->skb->data, |
2286 | sizeof(struct ipw2100_rx), |
2287 | DMA_FROM_DEVICE); |
2288 | if (dma_mapping_error(dev: &priv->pci_dev->dev, dma_addr: packet->dma_addr)) { |
2289 | dev_kfree_skb(packet->skb); |
2290 | return -ENOMEM; |
2291 | } |
2292 | |
2293 | return 0; |
2294 | } |
2295 | |
2296 | #define SEARCH_ERROR 0xffffffff |
2297 | #define SEARCH_FAIL 0xfffffffe |
2298 | #define SEARCH_SUCCESS 0xfffffff0 |
2299 | #define SEARCH_DISCARD 0 |
2300 | #define SEARCH_SNAPSHOT 1 |
2301 | |
2302 | #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff)) |
2303 | static void ipw2100_snapshot_free(struct ipw2100_priv *priv) |
2304 | { |
2305 | int i; |
2306 | if (!priv->snapshot[0]) |
2307 | return; |
2308 | for (i = 0; i < 0x30; i++) |
2309 | kfree(objp: priv->snapshot[i]); |
2310 | priv->snapshot[0] = NULL; |
2311 | } |
2312 | |
2313 | #ifdef IPW2100_DEBUG_C3 |
2314 | static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv) |
2315 | { |
2316 | int i; |
2317 | if (priv->snapshot[0]) |
2318 | return 1; |
2319 | for (i = 0; i < 0x30; i++) { |
2320 | priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC); |
2321 | if (!priv->snapshot[i]) { |
2322 | IPW_DEBUG_INFO("%s: Error allocating snapshot " |
2323 | "buffer %d\n" , priv->net_dev->name, i); |
2324 | while (i > 0) |
2325 | kfree(priv->snapshot[--i]); |
2326 | priv->snapshot[0] = NULL; |
2327 | return 0; |
2328 | } |
2329 | } |
2330 | |
2331 | return 1; |
2332 | } |
2333 | |
2334 | static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf, |
2335 | size_t len, int mode) |
2336 | { |
2337 | u32 i, j; |
2338 | u32 tmp; |
2339 | u8 *s, *d; |
2340 | u32 ret; |
2341 | |
2342 | s = in_buf; |
2343 | if (mode == SEARCH_SNAPSHOT) { |
2344 | if (!ipw2100_snapshot_alloc(priv)) |
2345 | mode = SEARCH_DISCARD; |
2346 | } |
2347 | |
2348 | for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) { |
2349 | read_nic_dword(priv->net_dev, i, &tmp); |
2350 | if (mode == SEARCH_SNAPSHOT) |
2351 | *(u32 *) SNAPSHOT_ADDR(i) = tmp; |
2352 | if (ret == SEARCH_FAIL) { |
2353 | d = (u8 *) & tmp; |
2354 | for (j = 0; j < 4; j++) { |
2355 | if (*s != *d) { |
2356 | s = in_buf; |
2357 | continue; |
2358 | } |
2359 | |
2360 | s++; |
2361 | d++; |
2362 | |
2363 | if ((s - in_buf) == len) |
2364 | ret = (i + j) - len + 1; |
2365 | } |
2366 | } else if (mode == SEARCH_DISCARD) |
2367 | return ret; |
2368 | } |
2369 | |
2370 | return ret; |
2371 | } |
2372 | #endif |
2373 | |
2374 | /* |
2375 | * |
2376 | * 0) Disconnect the SKB from the firmware (just unmap) |
2377 | * 1) Pack the ETH header into the SKB |
2378 | * 2) Pass the SKB to the network stack |
2379 | * |
2380 | * When packet is provided by the firmware, it contains the following: |
2381 | * |
2382 | * . libipw_hdr |
2383 | * . libipw_snap_hdr |
2384 | * |
2385 | * The size of the constructed ethernet |
2386 | * |
2387 | */ |
2388 | #ifdef IPW2100_RX_DEBUG |
2389 | static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH]; |
2390 | #endif |
2391 | |
2392 | static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i) |
2393 | { |
2394 | #ifdef IPW2100_DEBUG_C3 |
2395 | struct ipw2100_status *status = &priv->status_queue.drv[i]; |
2396 | u32 match, reg; |
2397 | int j; |
2398 | #endif |
2399 | |
2400 | IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n" , |
2401 | i * sizeof(struct ipw2100_status)); |
2402 | |
2403 | #ifdef IPW2100_DEBUG_C3 |
2404 | /* Halt the firmware so we can get a good image */ |
2405 | write_register(priv->net_dev, IPW_REG_RESET_REG, |
2406 | IPW_AUX_HOST_RESET_REG_STOP_MASTER); |
2407 | j = 5; |
2408 | do { |
2409 | udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY); |
2410 | read_register(priv->net_dev, IPW_REG_RESET_REG, ®); |
2411 | |
2412 | if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED) |
2413 | break; |
2414 | } while (j--); |
2415 | |
2416 | match = ipw2100_match_buf(priv, (u8 *) status, |
2417 | sizeof(struct ipw2100_status), |
2418 | SEARCH_SNAPSHOT); |
2419 | if (match < SEARCH_SUCCESS) |
2420 | IPW_DEBUG_INFO("%s: DMA status match in Firmware at " |
2421 | "offset 0x%06X, length %d:\n" , |
2422 | priv->net_dev->name, match, |
2423 | sizeof(struct ipw2100_status)); |
2424 | else |
2425 | IPW_DEBUG_INFO("%s: No DMA status match in " |
2426 | "Firmware.\n" , priv->net_dev->name); |
2427 | |
2428 | printk_buf((u8 *) priv->status_queue.drv, |
2429 | sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH); |
2430 | #endif |
2431 | |
2432 | priv->fatal_error = IPW2100_ERR_C3_CORRUPTION; |
2433 | priv->net_dev->stats.rx_errors++; |
2434 | schedule_reset(priv); |
2435 | } |
2436 | |
2437 | static void isr_rx(struct ipw2100_priv *priv, int i, |
2438 | struct libipw_rx_stats *stats) |
2439 | { |
2440 | struct net_device *dev = priv->net_dev; |
2441 | struct ipw2100_status *status = &priv->status_queue.drv[i]; |
2442 | struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
2443 | |
2444 | IPW_DEBUG_RX("Handler...\n" ); |
2445 | |
2446 | if (unlikely(status->frame_size > skb_tailroom(packet->skb))) { |
2447 | IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
2448 | " Dropping.\n" , |
2449 | dev->name, |
2450 | status->frame_size, skb_tailroom(packet->skb)); |
2451 | dev->stats.rx_errors++; |
2452 | return; |
2453 | } |
2454 | |
2455 | if (unlikely(!netif_running(dev))) { |
2456 | dev->stats.rx_errors++; |
2457 | priv->wstats.discard.misc++; |
2458 | IPW_DEBUG_DROP("Dropping packet while interface is not up.\n" ); |
2459 | return; |
2460 | } |
2461 | |
2462 | if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR && |
2463 | !(priv->status & STATUS_ASSOCIATED))) { |
2464 | IPW_DEBUG_DROP("Dropping packet while not associated.\n" ); |
2465 | priv->wstats.discard.misc++; |
2466 | return; |
2467 | } |
2468 | |
2469 | dma_unmap_single(&priv->pci_dev->dev, packet->dma_addr, |
2470 | sizeof(struct ipw2100_rx), DMA_FROM_DEVICE); |
2471 | |
2472 | skb_put(skb: packet->skb, len: status->frame_size); |
2473 | |
2474 | #ifdef IPW2100_RX_DEBUG |
2475 | /* Make a copy of the frame so we can dump it to the logs if |
2476 | * libipw_rx fails */ |
2477 | skb_copy_from_linear_data(skb: packet->skb, to: packet_data, |
2478 | min_t(u32, status->frame_size, |
2479 | IPW_RX_NIC_BUFFER_LENGTH)); |
2480 | #endif |
2481 | |
2482 | if (!libipw_rx(ieee: priv->ieee, skb: packet->skb, rx_stats: stats)) { |
2483 | #ifdef IPW2100_RX_DEBUG |
2484 | IPW_DEBUG_DROP("%s: Non consumed packet:\n" , |
2485 | dev->name); |
2486 | printk_buf(IPW_DL_DROP, data: packet_data, len: status->frame_size); |
2487 | #endif |
2488 | dev->stats.rx_errors++; |
2489 | |
2490 | /* libipw_rx failed, so it didn't free the SKB */ |
2491 | dev_kfree_skb_any(skb: packet->skb); |
2492 | packet->skb = NULL; |
2493 | } |
2494 | |
2495 | /* We need to allocate a new SKB and attach it to the RDB. */ |
2496 | if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
2497 | printk(KERN_WARNING DRV_NAME ": " |
2498 | "%s: Unable to allocate SKB onto RBD ring - disabling " |
2499 | "adapter.\n" , dev->name); |
2500 | /* TODO: schedule adapter shutdown */ |
2501 | IPW_DEBUG_INFO("TODO: Shutdown adapter...\n" ); |
2502 | } |
2503 | |
2504 | /* Update the RDB entry */ |
2505 | priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
2506 | } |
2507 | |
2508 | #ifdef CONFIG_IPW2100_MONITOR |
2509 | |
2510 | static void isr_rx_monitor(struct ipw2100_priv *priv, int i, |
2511 | struct libipw_rx_stats *stats) |
2512 | { |
2513 | struct net_device *dev = priv->net_dev; |
2514 | struct ipw2100_status *status = &priv->status_queue.drv[i]; |
2515 | struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
2516 | |
2517 | /* Magic struct that slots into the radiotap header -- no reason |
2518 | * to build this manually element by element, we can write it much |
2519 | * more efficiently than we can parse it. ORDER MATTERS HERE */ |
2520 | struct ipw_rt_hdr { |
2521 | struct ieee80211_radiotap_header rt_hdr; |
2522 | s8 rt_dbmsignal; /* signal in dbM, kluged to signed */ |
2523 | } *ipw_rt; |
2524 | |
2525 | IPW_DEBUG_RX("Handler...\n" ); |
2526 | |
2527 | if (unlikely(status->frame_size > skb_tailroom(packet->skb) - |
2528 | sizeof(struct ipw_rt_hdr))) { |
2529 | IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!" |
2530 | " Dropping.\n" , |
2531 | dev->name, |
2532 | status->frame_size, |
2533 | skb_tailroom(packet->skb)); |
2534 | dev->stats.rx_errors++; |
2535 | return; |
2536 | } |
2537 | |
2538 | if (unlikely(!netif_running(dev))) { |
2539 | dev->stats.rx_errors++; |
2540 | priv->wstats.discard.misc++; |
2541 | IPW_DEBUG_DROP("Dropping packet while interface is not up.\n" ); |
2542 | return; |
2543 | } |
2544 | |
2545 | if (unlikely(priv->config & CFG_CRC_CHECK && |
2546 | status->flags & IPW_STATUS_FLAG_CRC_ERROR)) { |
2547 | IPW_DEBUG_RX("CRC error in packet. Dropping.\n" ); |
2548 | dev->stats.rx_errors++; |
2549 | return; |
2550 | } |
2551 | |
2552 | dma_unmap_single(&priv->pci_dev->dev, packet->dma_addr, |
2553 | sizeof(struct ipw2100_rx), DMA_FROM_DEVICE); |
2554 | memmove(packet->skb->data + sizeof(struct ipw_rt_hdr), |
2555 | packet->skb->data, status->frame_size); |
2556 | |
2557 | ipw_rt = (struct ipw_rt_hdr *) packet->skb->data; |
2558 | |
2559 | ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; |
2560 | ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */ |
2561 | ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */ |
2562 | |
2563 | ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL); |
2564 | |
2565 | ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM; |
2566 | |
2567 | skb_put(skb: packet->skb, len: status->frame_size + sizeof(struct ipw_rt_hdr)); |
2568 | |
2569 | if (!libipw_rx(ieee: priv->ieee, skb: packet->skb, rx_stats: stats)) { |
2570 | dev->stats.rx_errors++; |
2571 | |
2572 | /* libipw_rx failed, so it didn't free the SKB */ |
2573 | dev_kfree_skb_any(skb: packet->skb); |
2574 | packet->skb = NULL; |
2575 | } |
2576 | |
2577 | /* We need to allocate a new SKB and attach it to the RDB. */ |
2578 | if (unlikely(ipw2100_alloc_skb(priv, packet))) { |
2579 | IPW_DEBUG_WARNING( |
2580 | "%s: Unable to allocate SKB onto RBD ring - disabling " |
2581 | "adapter.\n" , dev->name); |
2582 | /* TODO: schedule adapter shutdown */ |
2583 | IPW_DEBUG_INFO("TODO: Shutdown adapter...\n" ); |
2584 | } |
2585 | |
2586 | /* Update the RDB entry */ |
2587 | priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
2588 | } |
2589 | |
2590 | #endif |
2591 | |
2592 | static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i) |
2593 | { |
2594 | struct ipw2100_status *status = &priv->status_queue.drv[i]; |
2595 | struct ipw2100_rx *u = priv->rx_buffers[i].rxp; |
2596 | u16 frame_type = status->status_fields & STATUS_TYPE_MASK; |
2597 | |
2598 | switch (frame_type) { |
2599 | case COMMAND_STATUS_VAL: |
2600 | return (status->frame_size != sizeof(u->rx_data.command)); |
2601 | case STATUS_CHANGE_VAL: |
2602 | return (status->frame_size != sizeof(u->rx_data.status)); |
2603 | case HOST_NOTIFICATION_VAL: |
2604 | return (status->frame_size < sizeof(u->rx_data.notification)); |
2605 | case P80211_DATA_VAL: |
2606 | case P8023_DATA_VAL: |
2607 | #ifdef CONFIG_IPW2100_MONITOR |
2608 | return 0; |
2609 | #else |
2610 | switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
2611 | case IEEE80211_FTYPE_MGMT: |
2612 | case IEEE80211_FTYPE_CTL: |
2613 | return 0; |
2614 | case IEEE80211_FTYPE_DATA: |
2615 | return (status->frame_size > |
2616 | IPW_MAX_802_11_PAYLOAD_LENGTH); |
2617 | } |
2618 | #endif |
2619 | } |
2620 | |
2621 | return 1; |
2622 | } |
2623 | |
2624 | /* |
2625 | * ipw2100 interrupts are disabled at this point, and the ISR |
2626 | * is the only code that calls this method. So, we do not need |
2627 | * to play with any locks. |
2628 | * |
2629 | * RX Queue works as follows: |
2630 | * |
2631 | * Read index - firmware places packet in entry identified by the |
2632 | * Read index and advances Read index. In this manner, |
2633 | * Read index will always point to the next packet to |
2634 | * be filled--but not yet valid. |
2635 | * |
2636 | * Write index - driver fills this entry with an unused RBD entry. |
2637 | * This entry has not filled by the firmware yet. |
2638 | * |
2639 | * In between the W and R indexes are the RBDs that have been received |
2640 | * but not yet processed. |
2641 | * |
2642 | * The process of handling packets will start at WRITE + 1 and advance |
2643 | * until it reaches the READ index. |
2644 | * |
2645 | * The WRITE index is cached in the variable 'priv->rx_queue.next'. |
2646 | * |
2647 | */ |
2648 | static void __ipw2100_rx_process(struct ipw2100_priv *priv) |
2649 | { |
2650 | struct ipw2100_bd_queue *rxq = &priv->rx_queue; |
2651 | struct ipw2100_status_queue *sq = &priv->status_queue; |
2652 | struct ipw2100_rx_packet *packet; |
2653 | u16 frame_type; |
2654 | u32 r, w, i, s; |
2655 | struct ipw2100_rx *u; |
2656 | struct libipw_rx_stats stats = { |
2657 | .mac_time = jiffies, |
2658 | }; |
2659 | |
2660 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, val: &r); |
2661 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, val: &w); |
2662 | |
2663 | if (r >= rxq->entries) { |
2664 | IPW_DEBUG_RX("exit - bad read index\n" ); |
2665 | return; |
2666 | } |
2667 | |
2668 | i = (rxq->next + 1) % rxq->entries; |
2669 | s = i; |
2670 | while (i != r) { |
2671 | /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n", |
2672 | r, rxq->next, i); */ |
2673 | |
2674 | packet = &priv->rx_buffers[i]; |
2675 | |
2676 | /* Sync the DMA for the RX buffer so CPU is sure to get |
2677 | * the correct values */ |
2678 | dma_sync_single_for_cpu(dev: &priv->pci_dev->dev, addr: packet->dma_addr, |
2679 | size: sizeof(struct ipw2100_rx), |
2680 | dir: DMA_FROM_DEVICE); |
2681 | |
2682 | if (unlikely(ipw2100_corruption_check(priv, i))) { |
2683 | ipw2100_corruption_detected(priv, i); |
2684 | goto increment; |
2685 | } |
2686 | |
2687 | u = packet->rxp; |
2688 | frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK; |
2689 | stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM; |
2690 | stats.len = sq->drv[i].frame_size; |
2691 | |
2692 | stats.mask = 0; |
2693 | if (stats.rssi != 0) |
2694 | stats.mask |= LIBIPW_STATMASK_RSSI; |
2695 | stats.freq = LIBIPW_24GHZ_BAND; |
2696 | |
2697 | IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n" , |
2698 | priv->net_dev->name, frame_types[frame_type], |
2699 | stats.len); |
2700 | |
2701 | switch (frame_type) { |
2702 | case COMMAND_STATUS_VAL: |
2703 | /* Reset Rx watchdog */ |
2704 | isr_rx_complete_command(priv, cmd: &u->rx_data.command); |
2705 | break; |
2706 | |
2707 | case STATUS_CHANGE_VAL: |
2708 | isr_status_change(priv, status: u->rx_data.status); |
2709 | break; |
2710 | |
2711 | case P80211_DATA_VAL: |
2712 | case P8023_DATA_VAL: |
2713 | #ifdef CONFIG_IPW2100_MONITOR |
2714 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
2715 | isr_rx_monitor(priv, i, stats: &stats); |
2716 | break; |
2717 | } |
2718 | #endif |
2719 | if (stats.len < sizeof(struct libipw_hdr_3addr)) |
2720 | break; |
2721 | switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) { |
2722 | case IEEE80211_FTYPE_MGMT: |
2723 | libipw_rx_mgt(ieee: priv->ieee, |
2724 | header: &u->rx_data.header, stats: &stats); |
2725 | break; |
2726 | |
2727 | case IEEE80211_FTYPE_CTL: |
2728 | break; |
2729 | |
2730 | case IEEE80211_FTYPE_DATA: |
2731 | isr_rx(priv, i, stats: &stats); |
2732 | break; |
2733 | |
2734 | } |
2735 | break; |
2736 | } |
2737 | |
2738 | increment: |
2739 | /* clear status field associated with this RBD */ |
2740 | rxq->drv[i].status.info.field = 0; |
2741 | |
2742 | i = (i + 1) % rxq->entries; |
2743 | } |
2744 | |
2745 | if (i != s) { |
2746 | /* backtrack one entry, wrapping to end if at 0 */ |
2747 | rxq->next = (i ? i : rxq->entries) - 1; |
2748 | |
2749 | write_register(dev: priv->net_dev, |
2750 | IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, val: rxq->next); |
2751 | } |
2752 | } |
2753 | |
2754 | /* |
2755 | * __ipw2100_tx_process |
2756 | * |
2757 | * This routine will determine whether the next packet on |
2758 | * the fw_pend_list has been processed by the firmware yet. |
2759 | * |
2760 | * If not, then it does nothing and returns. |
2761 | * |
2762 | * If so, then it removes the item from the fw_pend_list, frees |
2763 | * any associated storage, and places the item back on the |
2764 | * free list of its source (either msg_free_list or tx_free_list) |
2765 | * |
2766 | * TX Queue works as follows: |
2767 | * |
2768 | * Read index - points to the next TBD that the firmware will |
2769 | * process. The firmware will read the data, and once |
2770 | * done processing, it will advance the Read index. |
2771 | * |
2772 | * Write index - driver fills this entry with an constructed TBD |
2773 | * entry. The Write index is not advanced until the |
2774 | * packet has been configured. |
2775 | * |
2776 | * In between the W and R indexes are the TBDs that have NOT been |
2777 | * processed. Lagging behind the R index are packets that have |
2778 | * been processed but have not been freed by the driver. |
2779 | * |
2780 | * In order to free old storage, an internal index will be maintained |
2781 | * that points to the next packet to be freed. When all used |
2782 | * packets have been freed, the oldest index will be the same as the |
2783 | * firmware's read index. |
2784 | * |
2785 | * The OLDEST index is cached in the variable 'priv->tx_queue.oldest' |
2786 | * |
2787 | * Because the TBD structure can not contain arbitrary data, the |
2788 | * driver must keep an internal queue of cached allocations such that |
2789 | * it can put that data back into the tx_free_list and msg_free_list |
2790 | * for use by future command and data packets. |
2791 | * |
2792 | */ |
2793 | static int __ipw2100_tx_process(struct ipw2100_priv *priv) |
2794 | { |
2795 | struct ipw2100_bd_queue *txq = &priv->tx_queue; |
2796 | struct ipw2100_bd *tbd; |
2797 | struct list_head *element; |
2798 | struct ipw2100_tx_packet *packet; |
2799 | int descriptors_used; |
2800 | int e, i; |
2801 | u32 r, w, frag_num = 0; |
2802 | |
2803 | if (list_empty(head: &priv->fw_pend_list)) |
2804 | return 0; |
2805 | |
2806 | element = priv->fw_pend_list.next; |
2807 | |
2808 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
2809 | tbd = &txq->drv[packet->index]; |
2810 | |
2811 | /* Determine how many TBD entries must be finished... */ |
2812 | switch (packet->type) { |
2813 | case COMMAND: |
2814 | /* COMMAND uses only one slot; don't advance */ |
2815 | descriptors_used = 1; |
2816 | e = txq->oldest; |
2817 | break; |
2818 | |
2819 | case DATA: |
2820 | /* DATA uses two slots; advance and loop position. */ |
2821 | descriptors_used = tbd->num_fragments; |
2822 | frag_num = tbd->num_fragments - 1; |
2823 | e = txq->oldest + frag_num; |
2824 | e %= txq->entries; |
2825 | break; |
2826 | |
2827 | default: |
2828 | printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n" , |
2829 | priv->net_dev->name); |
2830 | return 0; |
2831 | } |
2832 | |
2833 | /* if the last TBD is not done by NIC yet, then packet is |
2834 | * not ready to be released. |
2835 | * |
2836 | */ |
2837 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
2838 | val: &r); |
2839 | read_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
2840 | val: &w); |
2841 | if (w != txq->next) |
2842 | printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n" , |
2843 | priv->net_dev->name); |
2844 | |
2845 | /* |
2846 | * txq->next is the index of the last packet written txq->oldest is |
2847 | * the index of the r is the index of the next packet to be read by |
2848 | * firmware |
2849 | */ |
2850 | |
2851 | /* |
2852 | * Quick graphic to help you visualize the following |
2853 | * if / else statement |
2854 | * |
2855 | * ===>| s---->|=============== |
2856 | * e>| |
2857 | * | a | b | c | d | e | f | g | h | i | j | k | l |
2858 | * r---->| |
2859 | * w |
2860 | * |
2861 | * w - updated by driver |
2862 | * r - updated by firmware |
2863 | * s - start of oldest BD entry (txq->oldest) |
2864 | * e - end of oldest BD entry |
2865 | * |
2866 | */ |
2867 | if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) { |
2868 | IPW_DEBUG_TX("exit - no processed packets ready to release.\n" ); |
2869 | return 0; |
2870 | } |
2871 | |
2872 | list_del(entry: element); |
2873 | DEC_STAT(&priv->fw_pend_stat); |
2874 | |
2875 | #ifdef CONFIG_IPW2100_DEBUG |
2876 | { |
2877 | i = txq->oldest; |
2878 | IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n" , i, |
2879 | &txq->drv[i], |
2880 | (u32) (txq->nic + i * sizeof(struct ipw2100_bd)), |
2881 | txq->drv[i].host_addr, txq->drv[i].buf_length); |
2882 | |
2883 | if (packet->type == DATA) { |
2884 | i = (i + 1) % txq->entries; |
2885 | |
2886 | IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n" , i, |
2887 | &txq->drv[i], |
2888 | (u32) (txq->nic + i * |
2889 | sizeof(struct ipw2100_bd)), |
2890 | (u32) txq->drv[i].host_addr, |
2891 | txq->drv[i].buf_length); |
2892 | } |
2893 | } |
2894 | #endif |
2895 | |
2896 | switch (packet->type) { |
2897 | case DATA: |
2898 | if (txq->drv[txq->oldest].status.info.fields.txType != 0) |
2899 | printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
2900 | "Expecting DATA TBD but pulled " |
2901 | "something else: ids %d=%d.\n" , |
2902 | priv->net_dev->name, txq->oldest, packet->index); |
2903 | |
2904 | /* DATA packet; we have to unmap and free the SKB */ |
2905 | for (i = 0; i < frag_num; i++) { |
2906 | tbd = &txq->drv[(packet->index + 1 + i) % txq->entries]; |
2907 | |
2908 | IPW_DEBUG_TX("TX%d P=%08x L=%d\n" , |
2909 | (packet->index + 1 + i) % txq->entries, |
2910 | tbd->host_addr, tbd->buf_length); |
2911 | |
2912 | dma_unmap_single(&priv->pci_dev->dev, tbd->host_addr, |
2913 | tbd->buf_length, DMA_TO_DEVICE); |
2914 | } |
2915 | |
2916 | libipw_txb_free(packet->info.d_struct.txb); |
2917 | packet->info.d_struct.txb = NULL; |
2918 | |
2919 | list_add_tail(new: element, head: &priv->tx_free_list); |
2920 | INC_STAT(&priv->tx_free_stat); |
2921 | |
2922 | /* We have a free slot in the Tx queue, so wake up the |
2923 | * transmit layer if it is stopped. */ |
2924 | if (priv->status & STATUS_ASSOCIATED) |
2925 | netif_wake_queue(dev: priv->net_dev); |
2926 | |
2927 | /* A packet was processed by the hardware, so update the |
2928 | * watchdog */ |
2929 | netif_trans_update(dev: priv->net_dev); |
2930 | |
2931 | break; |
2932 | |
2933 | case COMMAND: |
2934 | if (txq->drv[txq->oldest].status.info.fields.txType != 1) |
2935 | printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. " |
2936 | "Expecting COMMAND TBD but pulled " |
2937 | "something else: ids %d=%d.\n" , |
2938 | priv->net_dev->name, txq->oldest, packet->index); |
2939 | |
2940 | #ifdef CONFIG_IPW2100_DEBUG |
2941 | if (packet->info.c_struct.cmd->host_command_reg < |
2942 | ARRAY_SIZE(command_types)) |
2943 | IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n" , |
2944 | command_types[packet->info.c_struct.cmd-> |
2945 | host_command_reg], |
2946 | packet->info.c_struct.cmd-> |
2947 | host_command_reg, |
2948 | packet->info.c_struct.cmd->cmd_status_reg); |
2949 | #endif |
2950 | |
2951 | list_add_tail(new: element, head: &priv->msg_free_list); |
2952 | INC_STAT(&priv->msg_free_stat); |
2953 | break; |
2954 | } |
2955 | |
2956 | /* advance oldest used TBD pointer to start of next entry */ |
2957 | txq->oldest = (e + 1) % txq->entries; |
2958 | /* increase available TBDs number */ |
2959 | txq->available += descriptors_used; |
2960 | SET_STAT(&priv->txq_stat, txq->available); |
2961 | |
2962 | IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n" , |
2963 | jiffies - packet->jiffy_start); |
2964 | |
2965 | return (!list_empty(head: &priv->fw_pend_list)); |
2966 | } |
2967 | |
2968 | static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv) |
2969 | { |
2970 | int i = 0; |
2971 | |
2972 | while (__ipw2100_tx_process(priv) && i < 200) |
2973 | i++; |
2974 | |
2975 | if (i == 200) { |
2976 | printk(KERN_WARNING DRV_NAME ": " |
2977 | "%s: Driver is running slow (%d iters).\n" , |
2978 | priv->net_dev->name, i); |
2979 | } |
2980 | } |
2981 | |
2982 | static void ipw2100_tx_send_commands(struct ipw2100_priv *priv) |
2983 | { |
2984 | struct list_head *element; |
2985 | struct ipw2100_tx_packet *packet; |
2986 | struct ipw2100_bd_queue *txq = &priv->tx_queue; |
2987 | struct ipw2100_bd *tbd; |
2988 | int next = txq->next; |
2989 | |
2990 | while (!list_empty(head: &priv->msg_pend_list)) { |
2991 | /* if there isn't enough space in TBD queue, then |
2992 | * don't stuff a new one in. |
2993 | * NOTE: 3 are needed as a command will take one, |
2994 | * and there is a minimum of 2 that must be |
2995 | * maintained between the r and w indexes |
2996 | */ |
2997 | if (txq->available <= 3) { |
2998 | IPW_DEBUG_TX("no room in tx_queue\n" ); |
2999 | break; |
3000 | } |
3001 | |
3002 | element = priv->msg_pend_list.next; |
3003 | list_del(entry: element); |
3004 | DEC_STAT(&priv->msg_pend_stat); |
3005 | |
3006 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
3007 | |
3008 | IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n" , |
3009 | &txq->drv[txq->next], |
3010 | (u32) (txq->nic + txq->next * |
3011 | sizeof(struct ipw2100_bd))); |
3012 | |
3013 | packet->index = txq->next; |
3014 | |
3015 | tbd = &txq->drv[txq->next]; |
3016 | |
3017 | /* initialize TBD */ |
3018 | tbd->host_addr = packet->info.c_struct.cmd_phys; |
3019 | tbd->buf_length = sizeof(struct ipw2100_cmd_header); |
3020 | /* not marking number of fragments causes problems |
3021 | * with f/w debug version */ |
3022 | tbd->num_fragments = 1; |
3023 | tbd->status.info.field = |
3024 | IPW_BD_STATUS_TX_FRAME_COMMAND | |
3025 | IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
3026 | |
3027 | /* update TBD queue counters */ |
3028 | txq->next++; |
3029 | txq->next %= txq->entries; |
3030 | txq->available--; |
3031 | DEC_STAT(&priv->txq_stat); |
3032 | |
3033 | list_add_tail(new: element, head: &priv->fw_pend_list); |
3034 | INC_STAT(&priv->fw_pend_stat); |
3035 | } |
3036 | |
3037 | if (txq->next != next) { |
3038 | /* kick off the DMA by notifying firmware the |
3039 | * write index has moved; make sure TBD stores are sync'd */ |
3040 | wmb(); |
3041 | write_register(dev: priv->net_dev, |
3042 | IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
3043 | val: txq->next); |
3044 | } |
3045 | } |
3046 | |
3047 | /* |
3048 | * ipw2100_tx_send_data |
3049 | * |
3050 | */ |
3051 | static void ipw2100_tx_send_data(struct ipw2100_priv *priv) |
3052 | { |
3053 | struct list_head *element; |
3054 | struct ipw2100_tx_packet *packet; |
3055 | struct ipw2100_bd_queue *txq = &priv->tx_queue; |
3056 | struct ipw2100_bd *tbd; |
3057 | int next = txq->next; |
3058 | int i = 0; |
3059 | struct ipw2100_data_header *ipw_hdr; |
3060 | struct libipw_hdr_3addr *hdr; |
3061 | |
3062 | while (!list_empty(head: &priv->tx_pend_list)) { |
3063 | /* if there isn't enough space in TBD queue, then |
3064 | * don't stuff a new one in. |
3065 | * NOTE: 4 are needed as a data will take two, |
3066 | * and there is a minimum of 2 that must be |
3067 | * maintained between the r and w indexes |
3068 | */ |
3069 | element = priv->tx_pend_list.next; |
3070 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
3071 | |
3072 | if (unlikely(1 + packet->info.d_struct.txb->nr_frags > |
3073 | IPW_MAX_BDS)) { |
3074 | /* TODO: Support merging buffers if more than |
3075 | * IPW_MAX_BDS are used */ |
3076 | IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. " |
3077 | "Increase fragmentation level.\n" , |
3078 | priv->net_dev->name); |
3079 | } |
3080 | |
3081 | if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) { |
3082 | IPW_DEBUG_TX("no room in tx_queue\n" ); |
3083 | break; |
3084 | } |
3085 | |
3086 | list_del(entry: element); |
3087 | DEC_STAT(&priv->tx_pend_stat); |
3088 | |
3089 | tbd = &txq->drv[txq->next]; |
3090 | |
3091 | packet->index = txq->next; |
3092 | |
3093 | ipw_hdr = packet->info.d_struct.data; |
3094 | hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb-> |
3095 | fragments[0]->data; |
3096 | |
3097 | if (priv->ieee->iw_mode == IW_MODE_INFRA) { |
3098 | /* To DS: Addr1 = BSSID, Addr2 = SA, |
3099 | Addr3 = DA */ |
3100 | memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
3101 | memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN); |
3102 | } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
3103 | /* not From/To DS: Addr1 = DA, Addr2 = SA, |
3104 | Addr3 = BSSID */ |
3105 | memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN); |
3106 | memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN); |
3107 | } |
3108 | |
3109 | ipw_hdr->host_command_reg = SEND; |
3110 | ipw_hdr->host_command_reg1 = 0; |
3111 | |
3112 | /* For now we only support host based encryption */ |
3113 | ipw_hdr->needs_encryption = 0; |
3114 | ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted; |
3115 | if (packet->info.d_struct.txb->nr_frags > 1) |
3116 | ipw_hdr->fragment_size = |
3117 | packet->info.d_struct.txb->frag_size - |
3118 | LIBIPW_3ADDR_LEN; |
3119 | else |
3120 | ipw_hdr->fragment_size = 0; |
3121 | |
3122 | tbd->host_addr = packet->info.d_struct.data_phys; |
3123 | tbd->buf_length = sizeof(struct ipw2100_data_header); |
3124 | tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags; |
3125 | tbd->status.info.field = |
3126 | IPW_BD_STATUS_TX_FRAME_802_3 | |
3127 | IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
3128 | txq->next++; |
3129 | txq->next %= txq->entries; |
3130 | |
3131 | IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n" , |
3132 | packet->index, tbd->host_addr, tbd->buf_length); |
3133 | #ifdef CONFIG_IPW2100_DEBUG |
3134 | if (packet->info.d_struct.txb->nr_frags > 1) |
3135 | IPW_DEBUG_FRAG("fragment Tx: %d frames\n" , |
3136 | packet->info.d_struct.txb->nr_frags); |
3137 | #endif |
3138 | |
3139 | for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) { |
3140 | tbd = &txq->drv[txq->next]; |
3141 | if (i == packet->info.d_struct.txb->nr_frags - 1) |
3142 | tbd->status.info.field = |
3143 | IPW_BD_STATUS_TX_FRAME_802_3 | |
3144 | IPW_BD_STATUS_TX_INTERRUPT_ENABLE; |
3145 | else |
3146 | tbd->status.info.field = |
3147 | IPW_BD_STATUS_TX_FRAME_802_3 | |
3148 | IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT; |
3149 | |
3150 | tbd->buf_length = packet->info.d_struct.txb-> |
3151 | fragments[i]->len - LIBIPW_3ADDR_LEN; |
3152 | |
3153 | tbd->host_addr = dma_map_single(&priv->pci_dev->dev, |
3154 | packet->info.d_struct. |
3155 | txb->fragments[i]->data + |
3156 | LIBIPW_3ADDR_LEN, |
3157 | tbd->buf_length, |
3158 | DMA_TO_DEVICE); |
3159 | if (dma_mapping_error(dev: &priv->pci_dev->dev, dma_addr: tbd->host_addr)) { |
3160 | IPW_DEBUG_TX("dma mapping error\n" ); |
3161 | break; |
3162 | } |
3163 | |
3164 | IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n" , |
3165 | txq->next, tbd->host_addr, |
3166 | tbd->buf_length); |
3167 | |
3168 | dma_sync_single_for_device(dev: &priv->pci_dev->dev, |
3169 | addr: tbd->host_addr, |
3170 | size: tbd->buf_length, |
3171 | dir: DMA_TO_DEVICE); |
3172 | |
3173 | txq->next++; |
3174 | txq->next %= txq->entries; |
3175 | } |
3176 | |
3177 | txq->available -= 1 + packet->info.d_struct.txb->nr_frags; |
3178 | SET_STAT(&priv->txq_stat, txq->available); |
3179 | |
3180 | list_add_tail(new: element, head: &priv->fw_pend_list); |
3181 | INC_STAT(&priv->fw_pend_stat); |
3182 | } |
3183 | |
3184 | if (txq->next != next) { |
3185 | /* kick off the DMA by notifying firmware the |
3186 | * write index has moved; make sure TBD stores are sync'd */ |
3187 | write_register(dev: priv->net_dev, |
3188 | IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX, |
3189 | val: txq->next); |
3190 | } |
3191 | } |
3192 | |
3193 | static void ipw2100_irq_tasklet(struct tasklet_struct *t) |
3194 | { |
3195 | struct ipw2100_priv *priv = from_tasklet(priv, t, irq_tasklet); |
3196 | struct net_device *dev = priv->net_dev; |
3197 | unsigned long flags; |
3198 | u32 inta, tmp; |
3199 | |
3200 | spin_lock_irqsave(&priv->low_lock, flags); |
3201 | ipw2100_disable_interrupts(priv); |
3202 | |
3203 | read_register(dev, IPW_REG_INTA, val: &inta); |
3204 | |
3205 | IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n" , |
3206 | (unsigned long)inta & IPW_INTERRUPT_MASK); |
3207 | |
3208 | priv->in_isr++; |
3209 | priv->interrupts++; |
3210 | |
3211 | /* We do not loop and keep polling for more interrupts as this |
3212 | * is frowned upon and doesn't play nicely with other potentially |
3213 | * chained IRQs */ |
3214 | IPW_DEBUG_ISR("INTA: 0x%08lX\n" , |
3215 | (unsigned long)inta & IPW_INTERRUPT_MASK); |
3216 | |
3217 | if (inta & IPW2100_INTA_FATAL_ERROR) { |
3218 | printk(KERN_WARNING DRV_NAME |
3219 | ": Fatal interrupt. Scheduling firmware restart.\n" ); |
3220 | priv->inta_other++; |
3221 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR); |
3222 | |
3223 | read_nic_dword(dev, IPW_NIC_FATAL_ERROR, val: &priv->fatal_error); |
3224 | IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n" , |
3225 | priv->net_dev->name, priv->fatal_error); |
3226 | |
3227 | read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), val: &tmp); |
3228 | IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n" , |
3229 | priv->net_dev->name, tmp); |
3230 | |
3231 | /* Wake up any sleeping jobs */ |
3232 | schedule_reset(priv); |
3233 | } |
3234 | |
3235 | if (inta & IPW2100_INTA_PARITY_ERROR) { |
3236 | printk(KERN_ERR DRV_NAME |
3237 | ": ***** PARITY ERROR INTERRUPT !!!!\n" ); |
3238 | priv->inta_other++; |
3239 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR); |
3240 | } |
3241 | |
3242 | if (inta & IPW2100_INTA_RX_TRANSFER) { |
3243 | IPW_DEBUG_ISR("RX interrupt\n" ); |
3244 | |
3245 | priv->rx_interrupts++; |
3246 | |
3247 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER); |
3248 | |
3249 | __ipw2100_rx_process(priv); |
3250 | __ipw2100_tx_complete(priv); |
3251 | } |
3252 | |
3253 | if (inta & IPW2100_INTA_TX_TRANSFER) { |
3254 | IPW_DEBUG_ISR("TX interrupt\n" ); |
3255 | |
3256 | priv->tx_interrupts++; |
3257 | |
3258 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER); |
3259 | |
3260 | __ipw2100_tx_complete(priv); |
3261 | ipw2100_tx_send_commands(priv); |
3262 | ipw2100_tx_send_data(priv); |
3263 | } |
3264 | |
3265 | if (inta & IPW2100_INTA_TX_COMPLETE) { |
3266 | IPW_DEBUG_ISR("TX complete\n" ); |
3267 | priv->inta_other++; |
3268 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE); |
3269 | |
3270 | __ipw2100_tx_complete(priv); |
3271 | } |
3272 | |
3273 | if (inta & IPW2100_INTA_EVENT_INTERRUPT) { |
3274 | /* ipw2100_handle_event(dev); */ |
3275 | priv->inta_other++; |
3276 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT); |
3277 | } |
3278 | |
3279 | if (inta & IPW2100_INTA_FW_INIT_DONE) { |
3280 | IPW_DEBUG_ISR("FW init done interrupt\n" ); |
3281 | priv->inta_other++; |
3282 | |
3283 | read_register(dev, IPW_REG_INTA, val: &tmp); |
3284 | if (tmp & (IPW2100_INTA_FATAL_ERROR | |
3285 | IPW2100_INTA_PARITY_ERROR)) { |
3286 | write_register(dev, IPW_REG_INTA, |
3287 | IPW2100_INTA_FATAL_ERROR | |
3288 | IPW2100_INTA_PARITY_ERROR); |
3289 | } |
3290 | |
3291 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE); |
3292 | } |
3293 | |
3294 | if (inta & IPW2100_INTA_STATUS_CHANGE) { |
3295 | IPW_DEBUG_ISR("Status change interrupt\n" ); |
3296 | priv->inta_other++; |
3297 | write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE); |
3298 | } |
3299 | |
3300 | if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) { |
3301 | IPW_DEBUG_ISR("slave host mode interrupt\n" ); |
3302 | priv->inta_other++; |
3303 | write_register(dev, IPW_REG_INTA, |
3304 | IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE); |
3305 | } |
3306 | |
3307 | priv->in_isr--; |
3308 | ipw2100_enable_interrupts(priv); |
3309 | |
3310 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
3311 | |
3312 | IPW_DEBUG_ISR("exit\n" ); |
3313 | } |
3314 | |
3315 | static irqreturn_t ipw2100_interrupt(int irq, void *data) |
3316 | { |
3317 | struct ipw2100_priv *priv = data; |
3318 | u32 inta, inta_mask; |
3319 | |
3320 | if (!data) |
3321 | return IRQ_NONE; |
3322 | |
3323 | spin_lock(lock: &priv->low_lock); |
3324 | |
3325 | /* We check to see if we should be ignoring interrupts before |
3326 | * we touch the hardware. During ucode load if we try and handle |
3327 | * an interrupt we can cause keyboard problems as well as cause |
3328 | * the ucode to fail to initialize */ |
3329 | if (!(priv->status & STATUS_INT_ENABLED)) { |
3330 | /* Shared IRQ */ |
3331 | goto none; |
3332 | } |
3333 | |
3334 | read_register(dev: priv->net_dev, IPW_REG_INTA_MASK, val: &inta_mask); |
3335 | read_register(dev: priv->net_dev, IPW_REG_INTA, val: &inta); |
3336 | |
3337 | if (inta == 0xFFFFFFFF) { |
3338 | /* Hardware disappeared */ |
3339 | printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n" ); |
3340 | goto none; |
3341 | } |
3342 | |
3343 | inta &= IPW_INTERRUPT_MASK; |
3344 | |
3345 | if (!(inta & inta_mask)) { |
3346 | /* Shared interrupt */ |
3347 | goto none; |
3348 | } |
3349 | |
3350 | /* We disable the hardware interrupt here just to prevent unneeded |
3351 | * calls to be made. We disable this again within the actual |
3352 | * work tasklet, so if another part of the code re-enables the |
3353 | * interrupt, that is fine */ |
3354 | ipw2100_disable_interrupts(priv); |
3355 | |
3356 | tasklet_schedule(t: &priv->irq_tasklet); |
3357 | spin_unlock(lock: &priv->low_lock); |
3358 | |
3359 | return IRQ_HANDLED; |
3360 | none: |
3361 | spin_unlock(lock: &priv->low_lock); |
3362 | return IRQ_NONE; |
3363 | } |
3364 | |
3365 | static netdev_tx_t ipw2100_tx(struct libipw_txb *txb, |
3366 | struct net_device *dev, int pri) |
3367 | { |
3368 | struct ipw2100_priv *priv = libipw_priv(dev); |
3369 | struct list_head *element; |
3370 | struct ipw2100_tx_packet *packet; |
3371 | unsigned long flags; |
3372 | |
3373 | spin_lock_irqsave(&priv->low_lock, flags); |
3374 | |
3375 | if (!(priv->status & STATUS_ASSOCIATED)) { |
3376 | IPW_DEBUG_INFO("Can not transmit when not connected.\n" ); |
3377 | priv->net_dev->stats.tx_carrier_errors++; |
3378 | netif_stop_queue(dev); |
3379 | goto fail_unlock; |
3380 | } |
3381 | |
3382 | if (list_empty(head: &priv->tx_free_list)) |
3383 | goto fail_unlock; |
3384 | |
3385 | element = priv->tx_free_list.next; |
3386 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
3387 | |
3388 | packet->info.d_struct.txb = txb; |
3389 | |
3390 | IPW_DEBUG_TX("Sending fragment (%d bytes):\n" , txb->fragments[0]->len); |
3391 | printk_buf(IPW_DL_TX, data: txb->fragments[0]->data, len: txb->fragments[0]->len); |
3392 | |
3393 | packet->jiffy_start = jiffies; |
3394 | |
3395 | list_del(entry: element); |
3396 | DEC_STAT(&priv->tx_free_stat); |
3397 | |
3398 | list_add_tail(new: element, head: &priv->tx_pend_list); |
3399 | INC_STAT(&priv->tx_pend_stat); |
3400 | |
3401 | ipw2100_tx_send_data(priv); |
3402 | |
3403 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
3404 | return NETDEV_TX_OK; |
3405 | |
3406 | fail_unlock: |
3407 | netif_stop_queue(dev); |
3408 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
3409 | return NETDEV_TX_BUSY; |
3410 | } |
3411 | |
3412 | static int ipw2100_msg_allocate(struct ipw2100_priv *priv) |
3413 | { |
3414 | int i, j, err = -EINVAL; |
3415 | void *v; |
3416 | dma_addr_t p; |
3417 | |
3418 | priv->msg_buffers = |
3419 | kmalloc_array(IPW_COMMAND_POOL_SIZE, |
3420 | size: sizeof(struct ipw2100_tx_packet), |
3421 | GFP_KERNEL); |
3422 | if (!priv->msg_buffers) |
3423 | return -ENOMEM; |
3424 | |
3425 | for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
3426 | v = dma_alloc_coherent(dev: &priv->pci_dev->dev, |
3427 | size: sizeof(struct ipw2100_cmd_header), dma_handle: &p, |
3428 | GFP_KERNEL); |
3429 | if (!v) { |
3430 | printk(KERN_ERR DRV_NAME ": " |
3431 | "%s: PCI alloc failed for msg " |
3432 | "buffers.\n" , priv->net_dev->name); |
3433 | err = -ENOMEM; |
3434 | break; |
3435 | } |
3436 | |
3437 | priv->msg_buffers[i].type = COMMAND; |
3438 | priv->msg_buffers[i].info.c_struct.cmd = |
3439 | (struct ipw2100_cmd_header *)v; |
3440 | priv->msg_buffers[i].info.c_struct.cmd_phys = p; |
3441 | } |
3442 | |
3443 | if (i == IPW_COMMAND_POOL_SIZE) |
3444 | return 0; |
3445 | |
3446 | for (j = 0; j < i; j++) { |
3447 | dma_free_coherent(dev: &priv->pci_dev->dev, |
3448 | size: sizeof(struct ipw2100_cmd_header), |
3449 | cpu_addr: priv->msg_buffers[j].info.c_struct.cmd, |
3450 | dma_handle: priv->msg_buffers[j].info.c_struct.cmd_phys); |
3451 | } |
3452 | |
3453 | kfree(objp: priv->msg_buffers); |
3454 | priv->msg_buffers = NULL; |
3455 | |
3456 | return err; |
3457 | } |
3458 | |
3459 | static int ipw2100_msg_initialize(struct ipw2100_priv *priv) |
3460 | { |
3461 | int i; |
3462 | |
3463 | INIT_LIST_HEAD(list: &priv->msg_free_list); |
3464 | INIT_LIST_HEAD(list: &priv->msg_pend_list); |
3465 | |
3466 | for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) |
3467 | list_add_tail(new: &priv->msg_buffers[i].list, head: &priv->msg_free_list); |
3468 | SET_STAT(&priv->msg_free_stat, i); |
3469 | |
3470 | return 0; |
3471 | } |
3472 | |
3473 | static void ipw2100_msg_free(struct ipw2100_priv *priv) |
3474 | { |
3475 | int i; |
3476 | |
3477 | if (!priv->msg_buffers) |
3478 | return; |
3479 | |
3480 | for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) { |
3481 | dma_free_coherent(dev: &priv->pci_dev->dev, |
3482 | size: sizeof(struct ipw2100_cmd_header), |
3483 | cpu_addr: priv->msg_buffers[i].info.c_struct.cmd, |
3484 | dma_handle: priv->msg_buffers[i].info.c_struct.cmd_phys); |
3485 | } |
3486 | |
3487 | kfree(objp: priv->msg_buffers); |
3488 | priv->msg_buffers = NULL; |
3489 | } |
3490 | |
3491 | static ssize_t pci_show(struct device *d, struct device_attribute *attr, |
3492 | char *buf) |
3493 | { |
3494 | struct pci_dev *pci_dev = to_pci_dev(d); |
3495 | char *out = buf; |
3496 | int i, j; |
3497 | u32 val; |
3498 | |
3499 | for (i = 0; i < 16; i++) { |
3500 | out += sprintf(buf: out, fmt: "[%08X] " , i * 16); |
3501 | for (j = 0; j < 16; j += 4) { |
3502 | pci_read_config_dword(dev: pci_dev, where: i * 16 + j, val: &val); |
3503 | out += sprintf(buf: out, fmt: "%08X " , val); |
3504 | } |
3505 | out += sprintf(buf: out, fmt: "\n" ); |
3506 | } |
3507 | |
3508 | return out - buf; |
3509 | } |
3510 | |
3511 | static DEVICE_ATTR_RO(pci); |
3512 | |
3513 | static ssize_t cfg_show(struct device *d, struct device_attribute *attr, |
3514 | char *buf) |
3515 | { |
3516 | struct ipw2100_priv *p = dev_get_drvdata(dev: d); |
3517 | return sprintf(buf, fmt: "0x%08x\n" , (int)p->config); |
3518 | } |
3519 | |
3520 | static DEVICE_ATTR_RO(cfg); |
3521 | |
3522 | static ssize_t status_show(struct device *d, struct device_attribute *attr, |
3523 | char *buf) |
3524 | { |
3525 | struct ipw2100_priv *p = dev_get_drvdata(dev: d); |
3526 | return sprintf(buf, fmt: "0x%08x\n" , (int)p->status); |
3527 | } |
3528 | |
3529 | static DEVICE_ATTR_RO(status); |
3530 | |
3531 | static ssize_t capability_show(struct device *d, struct device_attribute *attr, |
3532 | char *buf) |
3533 | { |
3534 | struct ipw2100_priv *p = dev_get_drvdata(dev: d); |
3535 | return sprintf(buf, fmt: "0x%08x\n" , (int)p->capability); |
3536 | } |
3537 | |
3538 | static DEVICE_ATTR_RO(capability); |
3539 | |
3540 | #define IPW2100_REG(x) { IPW_ ##x, #x } |
3541 | static const struct { |
3542 | u32 addr; |
3543 | const char *name; |
3544 | } hw_data[] = { |
3545 | IPW2100_REG(REG_GP_CNTRL), |
3546 | IPW2100_REG(REG_GPIO), |
3547 | IPW2100_REG(REG_INTA), |
3548 | IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),}; |
3549 | #define IPW2100_NIC(x, s) { x, #x, s } |
3550 | static const struct { |
3551 | u32 addr; |
3552 | const char *name; |
3553 | size_t size; |
3554 | } nic_data[] = { |
3555 | IPW2100_NIC(IPW2100_CONTROL_REG, 2), |
3556 | IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),}; |
3557 | #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d } |
3558 | static const struct { |
3559 | u8 index; |
3560 | const char *name; |
3561 | const char *desc; |
3562 | } ord_data[] = { |
3563 | IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)" ), |
3564 | IPW2100_ORD(STAT_TX_HOST_COMPLETE, |
3565 | "successful Host Tx's (MSDU)" ), |
3566 | IPW2100_ORD(STAT_TX_DIR_DATA, |
3567 | "successful Directed Tx's (MSDU)" ), |
3568 | IPW2100_ORD(STAT_TX_DIR_DATA1, |
3569 | "successful Directed Tx's (MSDU) @ 1MB" ), |
3570 | IPW2100_ORD(STAT_TX_DIR_DATA2, |
3571 | "successful Directed Tx's (MSDU) @ 2MB" ), |
3572 | IPW2100_ORD(STAT_TX_DIR_DATA5_5, |
3573 | "successful Directed Tx's (MSDU) @ 5_5MB" ), |
3574 | IPW2100_ORD(STAT_TX_DIR_DATA11, |
3575 | "successful Directed Tx's (MSDU) @ 11MB" ), |
3576 | IPW2100_ORD(STAT_TX_NODIR_DATA1, |
3577 | "successful Non_Directed Tx's (MSDU) @ 1MB" ), |
3578 | IPW2100_ORD(STAT_TX_NODIR_DATA2, |
3579 | "successful Non_Directed Tx's (MSDU) @ 2MB" ), |
3580 | IPW2100_ORD(STAT_TX_NODIR_DATA5_5, |
3581 | "successful Non_Directed Tx's (MSDU) @ 5.5MB" ), |
3582 | IPW2100_ORD(STAT_TX_NODIR_DATA11, |
3583 | "successful Non_Directed Tx's (MSDU) @ 11MB" ), |
3584 | IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's" ), |
3585 | IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS" ), |
3586 | IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS" ), |
3587 | IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK" ), |
3588 | IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's" ), |
3589 | IPW2100_ORD(STAT_TX_ASSN_RESP, |
3590 | "successful Association response Tx's" ), |
3591 | IPW2100_ORD(STAT_TX_REASSN, |
3592 | "successful Reassociation Tx's" ), |
3593 | IPW2100_ORD(STAT_TX_REASSN_RESP, |
3594 | "successful Reassociation response Tx's" ), |
3595 | IPW2100_ORD(STAT_TX_PROBE, |
3596 | "probes successfully transmitted" ), |
3597 | IPW2100_ORD(STAT_TX_PROBE_RESP, |
3598 | "probe responses successfully transmitted" ), |
3599 | IPW2100_ORD(STAT_TX_BEACON, "tx beacon" ), |
3600 | IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM" ), |
3601 | IPW2100_ORD(STAT_TX_DISASSN, |
3602 | "successful Disassociation TX" ), |
3603 | IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx" ), |
3604 | IPW2100_ORD(STAT_TX_DEAUTH, |
3605 | "successful Deauthentication TX" ), |
3606 | IPW2100_ORD(STAT_TX_TOTAL_BYTES, |
3607 | "Total successful Tx data bytes" ), |
3608 | IPW2100_ORD(STAT_TX_RETRIES, "Tx retries" ), |
3609 | IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS" ), |
3610 | IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS" ), |
3611 | IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS" ), |
3612 | IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS" ), |
3613 | IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures" ), |
3614 | IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP, |
3615 | "times max tries in a hop failed" ), |
3616 | IPW2100_ORD(STAT_TX_DISASSN_FAIL, |
3617 | "times disassociation failed" ), |
3618 | IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames" ), |
3619 | IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks" ), |
3620 | IPW2100_ORD(STAT_RX_HOST, "packets passed to host" ), |
3621 | IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets" ), |
3622 | IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB" ), |
3623 | IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB" ), |
3624 | IPW2100_ORD(STAT_RX_DIR_DATA5_5, |
3625 | "directed packets at 5.5MB" ), |
3626 | IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB" ), |
3627 | IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets" ), |
3628 | IPW2100_ORD(STAT_RX_NODIR_DATA1, |
3629 | "nondirected packets at 1MB" ), |
3630 | IPW2100_ORD(STAT_RX_NODIR_DATA2, |
3631 | "nondirected packets at 2MB" ), |
3632 | IPW2100_ORD(STAT_RX_NODIR_DATA5_5, |
3633 | "nondirected packets at 5.5MB" ), |
3634 | IPW2100_ORD(STAT_RX_NODIR_DATA11, |
3635 | "nondirected packets at 11MB" ), |
3636 | IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's" ), |
3637 | IPW2100_ORD(STAT_RX_RTS, "Rx RTS" ), IPW2100_ORD(STAT_RX_CTS, |
3638 | "Rx CTS" ), |
3639 | IPW2100_ORD(STAT_RX_ACK, "Rx ACK" ), |
3640 | IPW2100_ORD(STAT_RX_CFEND, "Rx CF End" ), |
3641 | IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack" ), |
3642 | IPW2100_ORD(STAT_RX_ASSN, "Association Rx's" ), |
3643 | IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's" ), |
3644 | IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's" ), |
3645 | IPW2100_ORD(STAT_RX_REASSN_RESP, |
3646 | "Reassociation response Rx's" ), |
3647 | IPW2100_ORD(STAT_RX_PROBE, "probe Rx's" ), |
3648 | IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's" ), |
3649 | IPW2100_ORD(STAT_RX_BEACON, "Rx beacon" ), |
3650 | IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM" ), |
3651 | IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx" ), |
3652 | IPW2100_ORD(STAT_RX_AUTH, "authentication Rx" ), |
3653 | IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx" ), |
3654 | IPW2100_ORD(STAT_RX_TOTAL_BYTES, |
3655 | "Total rx data bytes received" ), |
3656 | IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error" ), |
3657 | IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB" ), |
3658 | IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB" ), |
3659 | IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB" ), |
3660 | IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB" ), |
3661 | IPW2100_ORD(STAT_RX_DUPLICATE1, |
3662 | "duplicate rx packets at 1MB" ), |
3663 | IPW2100_ORD(STAT_RX_DUPLICATE2, |
3664 | "duplicate rx packets at 2MB" ), |
3665 | IPW2100_ORD(STAT_RX_DUPLICATE5_5, |
3666 | "duplicate rx packets at 5.5MB" ), |
3667 | IPW2100_ORD(STAT_RX_DUPLICATE11, |
3668 | "duplicate rx packets at 11MB" ), |
3669 | IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets" ), |
3670 | IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db" ), |
3671 | IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db" ), |
3672 | IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db" ), |
3673 | IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, |
3674 | "rx frames with invalid protocol" ), |
3675 | IPW2100_ORD(SYS_BOOT_TIME, "Boot time" ), |
3676 | IPW2100_ORD(STAT_RX_NO_BUFFER, |
3677 | "rx frames rejected due to no buffer" ), |
3678 | IPW2100_ORD(STAT_RX_MISSING_FRAG, |
3679 | "rx frames dropped due to missing fragment" ), |
3680 | IPW2100_ORD(STAT_RX_ORPHAN_FRAG, |
3681 | "rx frames dropped due to non-sequential fragment" ), |
3682 | IPW2100_ORD(STAT_RX_ORPHAN_FRAME, |
3683 | "rx frames dropped due to unmatched 1st frame" ), |
3684 | IPW2100_ORD(STAT_RX_FRAG_AGEOUT, |
3685 | "rx frames dropped due to uncompleted frame" ), |
3686 | IPW2100_ORD(STAT_RX_ICV_ERRORS, |
3687 | "ICV errors during decryption" ), |
3688 | IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended" ), |
3689 | IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout" ), |
3690 | IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, |
3691 | "poll response timeouts" ), |
3692 | IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, |
3693 | "timeouts waiting for last {broad,multi}cast pkt" ), |
3694 | IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received" ), |
3695 | IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received" ), |
3696 | IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID" ), |
3697 | IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association" ), |
3698 | IPW2100_ORD(STAT_PERCENT_MISSED_BCNS, |
3699 | "current calculation of % missed beacons" ), |
3700 | IPW2100_ORD(STAT_PERCENT_RETRIES, |
3701 | "current calculation of % missed tx retries" ), |
3702 | IPW2100_ORD(ASSOCIATED_AP_PTR, |
3703 | "0 if not associated, else pointer to AP table entry" ), |
3704 | IPW2100_ORD(AVAILABLE_AP_CNT, |
3705 | "AP's described in the AP table" ), |
3706 | IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs" ), |
3707 | IPW2100_ORD(STAT_AP_ASSNS, "associations" ), |
3708 | IPW2100_ORD(STAT_ASSN_FAIL, "association failures" ), |
3709 | IPW2100_ORD(STAT_ASSN_RESP_FAIL, |
3710 | "failures due to response fail" ), |
3711 | IPW2100_ORD(STAT_FULL_SCANS, "full scans" ), |
3712 | IPW2100_ORD(CARD_DISABLED, "Card Disabled" ), |
3713 | IPW2100_ORD(STAT_ROAM_INHIBIT, |
3714 | "times roaming was inhibited due to activity" ), |
3715 | IPW2100_ORD(RSSI_AT_ASSN, |
3716 | "RSSI of associated AP at time of association" ), |
3717 | IPW2100_ORD(STAT_ASSN_CAUSE1, |
3718 | "reassociation: no probe response or TX on hop" ), |
3719 | IPW2100_ORD(STAT_ASSN_CAUSE2, |
3720 | "reassociation: poor tx/rx quality" ), |
3721 | IPW2100_ORD(STAT_ASSN_CAUSE3, |
3722 | "reassociation: tx/rx quality (excessive AP load" ), |
3723 | IPW2100_ORD(STAT_ASSN_CAUSE4, |
3724 | "reassociation: AP RSSI level" ), |
3725 | IPW2100_ORD(STAT_ASSN_CAUSE5, |
3726 | "reassociations due to load leveling" ), |
3727 | IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed" ), |
3728 | IPW2100_ORD(STAT_AUTH_RESP_FAIL, |
3729 | "times authentication response failed" ), |
3730 | IPW2100_ORD(STATION_TABLE_CNT, |
3731 | "entries in association table" ), |
3732 | IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI" ), |
3733 | IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP" ), |
3734 | IPW2100_ORD(COUNTRY_CODE, |
3735 | "IEEE country code as recv'd from beacon" ), |
3736 | IPW2100_ORD(COUNTRY_CHANNELS, |
3737 | "channels supported by country" ), |
3738 | IPW2100_ORD(RESET_CNT, "adapter resets (warm)" ), |
3739 | IPW2100_ORD(BEACON_INTERVAL, "Beacon interval" ), |
3740 | IPW2100_ORD(ANTENNA_DIVERSITY, |
3741 | "TRUE if antenna diversity is disabled" ), |
3742 | IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs" ), |
3743 | IPW2100_ORD(OUR_FREQ, |
3744 | "current radio freq lower digits - channel ID" ), |
3745 | IPW2100_ORD(RTC_TIME, "current RTC time" ), |
3746 | IPW2100_ORD(PORT_TYPE, "operating mode" ), |
3747 | IPW2100_ORD(CURRENT_TX_RATE, "current tx rate" ), |
3748 | IPW2100_ORD(SUPPORTED_RATES, "supported tx rates" ), |
3749 | IPW2100_ORD(ATIM_WINDOW, "current ATIM Window" ), |
3750 | IPW2100_ORD(BASIC_RATES, "basic tx rates" ), |
3751 | IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate" ), |
3752 | IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate" ), |
3753 | IPW2100_ORD(CAPABILITIES, |
3754 | "Management frame capability field" ), |
3755 | IPW2100_ORD(AUTH_TYPE, "Type of authentication" ), |
3756 | IPW2100_ORD(RADIO_TYPE, "Adapter card platform type" ), |
3757 | IPW2100_ORD(RTS_THRESHOLD, |
3758 | "Min packet length for RTS handshaking" ), |
3759 | IPW2100_ORD(INT_MODE, "International mode" ), |
3760 | IPW2100_ORD(FRAGMENTATION_THRESHOLD, |
3761 | "protocol frag threshold" ), |
3762 | IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, |
3763 | "EEPROM offset in SRAM" ), |
3764 | IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, |
3765 | "EEPROM size in SRAM" ), |
3766 | IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability" ), |
3767 | IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, |
3768 | "EEPROM IBSS 11b channel set" ), |
3769 | IPW2100_ORD(MAC_VERSION, "MAC Version" ), |
3770 | IPW2100_ORD(MAC_REVISION, "MAC Revision" ), |
3771 | IPW2100_ORD(RADIO_VERSION, "Radio Version" ), |
3772 | IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP" ), |
3773 | IPW2100_ORD(UCODE_VERSION, "Ucode Version" ),}; |
3774 | |
3775 | static ssize_t registers_show(struct device *d, struct device_attribute *attr, |
3776 | char *buf) |
3777 | { |
3778 | int i; |
3779 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3780 | struct net_device *dev = priv->net_dev; |
3781 | char *out = buf; |
3782 | u32 val = 0; |
3783 | |
3784 | out += sprintf(buf: out, fmt: "%30s [Address ] : Hex\n" , "Register" ); |
3785 | |
3786 | for (i = 0; i < ARRAY_SIZE(hw_data); i++) { |
3787 | read_register(dev, reg: hw_data[i].addr, val: &val); |
3788 | out += sprintf(buf: out, fmt: "%30s [%08X] : %08X\n" , |
3789 | hw_data[i].name, hw_data[i].addr, val); |
3790 | } |
3791 | |
3792 | return out - buf; |
3793 | } |
3794 | |
3795 | static DEVICE_ATTR_RO(registers); |
3796 | |
3797 | static ssize_t hardware_show(struct device *d, struct device_attribute *attr, |
3798 | char *buf) |
3799 | { |
3800 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3801 | struct net_device *dev = priv->net_dev; |
3802 | char *out = buf; |
3803 | int i; |
3804 | |
3805 | out += sprintf(buf: out, fmt: "%30s [Address ] : Hex\n" , "NIC entry" ); |
3806 | |
3807 | for (i = 0; i < ARRAY_SIZE(nic_data); i++) { |
3808 | u8 tmp8; |
3809 | u16 tmp16; |
3810 | u32 tmp32; |
3811 | |
3812 | switch (nic_data[i].size) { |
3813 | case 1: |
3814 | read_nic_byte(dev, addr: nic_data[i].addr, val: &tmp8); |
3815 | out += sprintf(buf: out, fmt: "%30s [%08X] : %02X\n" , |
3816 | nic_data[i].name, nic_data[i].addr, |
3817 | tmp8); |
3818 | break; |
3819 | case 2: |
3820 | read_nic_word(dev, addr: nic_data[i].addr, val: &tmp16); |
3821 | out += sprintf(buf: out, fmt: "%30s [%08X] : %04X\n" , |
3822 | nic_data[i].name, nic_data[i].addr, |
3823 | tmp16); |
3824 | break; |
3825 | case 4: |
3826 | read_nic_dword(dev, addr: nic_data[i].addr, val: &tmp32); |
3827 | out += sprintf(buf: out, fmt: "%30s [%08X] : %08X\n" , |
3828 | nic_data[i].name, nic_data[i].addr, |
3829 | tmp32); |
3830 | break; |
3831 | } |
3832 | } |
3833 | return out - buf; |
3834 | } |
3835 | |
3836 | static DEVICE_ATTR_RO(hardware); |
3837 | |
3838 | static ssize_t memory_show(struct device *d, struct device_attribute *attr, |
3839 | char *buf) |
3840 | { |
3841 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3842 | struct net_device *dev = priv->net_dev; |
3843 | static unsigned long loop = 0; |
3844 | int len = 0; |
3845 | u32 buffer[4]; |
3846 | int i; |
3847 | char line[81]; |
3848 | |
3849 | if (loop >= 0x30000) |
3850 | loop = 0; |
3851 | |
3852 | /* sysfs provides us PAGE_SIZE buffer */ |
3853 | while (len < PAGE_SIZE - 128 && loop < 0x30000) { |
3854 | |
3855 | if (priv->snapshot[0]) |
3856 | for (i = 0; i < 4; i++) |
3857 | buffer[i] = |
3858 | *(u32 *) SNAPSHOT_ADDR(loop + i * 4); |
3859 | else |
3860 | for (i = 0; i < 4; i++) |
3861 | read_nic_dword(dev, addr: loop + i * 4, val: &buffer[i]); |
3862 | |
3863 | if (priv->dump_raw) |
3864 | len += sprintf(buf: buf + len, |
3865 | fmt: "%c%c%c%c" |
3866 | "%c%c%c%c" |
3867 | "%c%c%c%c" |
3868 | "%c%c%c%c" , |
3869 | ((u8 *) buffer)[0x0], |
3870 | ((u8 *) buffer)[0x1], |
3871 | ((u8 *) buffer)[0x2], |
3872 | ((u8 *) buffer)[0x3], |
3873 | ((u8 *) buffer)[0x4], |
3874 | ((u8 *) buffer)[0x5], |
3875 | ((u8 *) buffer)[0x6], |
3876 | ((u8 *) buffer)[0x7], |
3877 | ((u8 *) buffer)[0x8], |
3878 | ((u8 *) buffer)[0x9], |
3879 | ((u8 *) buffer)[0xa], |
3880 | ((u8 *) buffer)[0xb], |
3881 | ((u8 *) buffer)[0xc], |
3882 | ((u8 *) buffer)[0xd], |
3883 | ((u8 *) buffer)[0xe], |
3884 | ((u8 *) buffer)[0xf]); |
3885 | else |
3886 | len += sprintf(buf: buf + len, fmt: "%s\n" , |
3887 | snprint_line(buf: line, count: sizeof(line), |
3888 | data: (u8 *) buffer, len: 16, ofs: loop)); |
3889 | loop += 16; |
3890 | } |
3891 | |
3892 | return len; |
3893 | } |
3894 | |
3895 | static ssize_t memory_store(struct device *d, struct device_attribute *attr, |
3896 | const char *buf, size_t count) |
3897 | { |
3898 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3899 | struct net_device *dev = priv->net_dev; |
3900 | const char *p = buf; |
3901 | |
3902 | (void)dev; /* kill unused-var warning for debug-only code */ |
3903 | |
3904 | if (count < 1) |
3905 | return count; |
3906 | |
3907 | if (p[0] == '1' || |
3908 | (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) { |
3909 | IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n" , |
3910 | dev->name); |
3911 | priv->dump_raw = 1; |
3912 | |
3913 | } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' && |
3914 | tolower(p[1]) == 'f')) { |
3915 | IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n" , |
3916 | dev->name); |
3917 | priv->dump_raw = 0; |
3918 | |
3919 | } else if (tolower(p[0]) == 'r') { |
3920 | IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n" , dev->name); |
3921 | ipw2100_snapshot_free(priv); |
3922 | |
3923 | } else |
3924 | IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, " |
3925 | "reset = clear memory snapshot\n" , dev->name); |
3926 | |
3927 | return count; |
3928 | } |
3929 | |
3930 | static DEVICE_ATTR_RW(memory); |
3931 | |
3932 | static ssize_t ordinals_show(struct device *d, struct device_attribute *attr, |
3933 | char *buf) |
3934 | { |
3935 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3936 | u32 val = 0; |
3937 | int len = 0; |
3938 | u32 val_len; |
3939 | static int loop = 0; |
3940 | |
3941 | if (priv->status & STATUS_RF_KILL_MASK) |
3942 | return 0; |
3943 | |
3944 | if (loop >= ARRAY_SIZE(ord_data)) |
3945 | loop = 0; |
3946 | |
3947 | /* sysfs provides us PAGE_SIZE buffer */ |
3948 | while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) { |
3949 | val_len = sizeof(u32); |
3950 | |
3951 | if (ipw2100_get_ordinal(priv, ord: ord_data[loop].index, val: &val, |
3952 | len: &val_len)) |
3953 | len += sprintf(buf: buf + len, fmt: "[0x%02X] = ERROR %s\n" , |
3954 | ord_data[loop].index, |
3955 | ord_data[loop].desc); |
3956 | else |
3957 | len += sprintf(buf: buf + len, fmt: "[0x%02X] = 0x%08X %s\n" , |
3958 | ord_data[loop].index, val, |
3959 | ord_data[loop].desc); |
3960 | loop++; |
3961 | } |
3962 | |
3963 | return len; |
3964 | } |
3965 | |
3966 | static DEVICE_ATTR_RO(ordinals); |
3967 | |
3968 | static ssize_t stats_show(struct device *d, struct device_attribute *attr, |
3969 | char *buf) |
3970 | { |
3971 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
3972 | char *out = buf; |
3973 | |
3974 | out += sprintf(buf: out, fmt: "interrupts: %d {tx: %d, rx: %d, other: %d}\n" , |
3975 | priv->interrupts, priv->tx_interrupts, |
3976 | priv->rx_interrupts, priv->inta_other); |
3977 | out += sprintf(buf: out, fmt: "firmware resets: %d\n" , priv->resets); |
3978 | out += sprintf(buf: out, fmt: "firmware hangs: %d\n" , priv->hangs); |
3979 | #ifdef CONFIG_IPW2100_DEBUG |
3980 | out += sprintf(buf: out, fmt: "packet mismatch image: %s\n" , |
3981 | priv->snapshot[0] ? "YES" : "NO" ); |
3982 | #endif |
3983 | |
3984 | return out - buf; |
3985 | } |
3986 | |
3987 | static DEVICE_ATTR_RO(stats); |
3988 | |
3989 | static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode) |
3990 | { |
3991 | int err; |
3992 | |
3993 | if (mode == priv->ieee->iw_mode) |
3994 | return 0; |
3995 | |
3996 | err = ipw2100_disable_adapter(priv); |
3997 | if (err) { |
3998 | printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n" , |
3999 | priv->net_dev->name, err); |
4000 | return err; |
4001 | } |
4002 | |
4003 | switch (mode) { |
4004 | case IW_MODE_INFRA: |
4005 | priv->net_dev->type = ARPHRD_ETHER; |
4006 | break; |
4007 | case IW_MODE_ADHOC: |
4008 | priv->net_dev->type = ARPHRD_ETHER; |
4009 | break; |
4010 | #ifdef CONFIG_IPW2100_MONITOR |
4011 | case IW_MODE_MONITOR: |
4012 | priv->last_mode = priv->ieee->iw_mode; |
4013 | priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP; |
4014 | break; |
4015 | #endif /* CONFIG_IPW2100_MONITOR */ |
4016 | } |
4017 | |
4018 | priv->ieee->iw_mode = mode; |
4019 | |
4020 | #ifdef CONFIG_PM |
4021 | /* Indicate ipw2100_download_firmware download firmware |
4022 | * from disk instead of memory. */ |
4023 | ipw2100_firmware.version = 0; |
4024 | #endif |
4025 | |
4026 | printk(KERN_INFO "%s: Resetting on mode change.\n" , priv->net_dev->name); |
4027 | priv->reset_backoff = 0; |
4028 | schedule_reset(priv); |
4029 | |
4030 | return 0; |
4031 | } |
4032 | |
4033 | static ssize_t internals_show(struct device *d, struct device_attribute *attr, |
4034 | char *buf) |
4035 | { |
4036 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4037 | int len = 0; |
4038 | |
4039 | #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x) |
4040 | |
4041 | if (priv->status & STATUS_ASSOCIATED) |
4042 | len += sprintf(buf: buf + len, fmt: "connected: %llu\n" , |
4043 | ktime_get_boottime_seconds() - priv->connect_start); |
4044 | else |
4045 | len += sprintf(buf: buf + len, fmt: "not connected\n" ); |
4046 | |
4047 | DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p" ); |
4048 | DUMP_VAR(status, "08lx" ); |
4049 | DUMP_VAR(config, "08lx" ); |
4050 | DUMP_VAR(capability, "08lx" ); |
4051 | |
4052 | len += |
4053 | sprintf(buf: buf + len, fmt: "last_rtc: %lu\n" , |
4054 | (unsigned long)priv->last_rtc); |
4055 | |
4056 | DUMP_VAR(fatal_error, "d" ); |
4057 | DUMP_VAR(stop_hang_check, "d" ); |
4058 | DUMP_VAR(stop_rf_kill, "d" ); |
4059 | DUMP_VAR(messages_sent, "d" ); |
4060 | |
4061 | DUMP_VAR(tx_pend_stat.value, "d" ); |
4062 | DUMP_VAR(tx_pend_stat.hi, "d" ); |
4063 | |
4064 | DUMP_VAR(tx_free_stat.value, "d" ); |
4065 | DUMP_VAR(tx_free_stat.lo, "d" ); |
4066 | |
4067 | DUMP_VAR(msg_free_stat.value, "d" ); |
4068 | DUMP_VAR(msg_free_stat.lo, "d" ); |
4069 | |
4070 | DUMP_VAR(msg_pend_stat.value, "d" ); |
4071 | DUMP_VAR(msg_pend_stat.hi, "d" ); |
4072 | |
4073 | DUMP_VAR(fw_pend_stat.value, "d" ); |
4074 | DUMP_VAR(fw_pend_stat.hi, "d" ); |
4075 | |
4076 | DUMP_VAR(txq_stat.value, "d" ); |
4077 | DUMP_VAR(txq_stat.lo, "d" ); |
4078 | |
4079 | DUMP_VAR(ieee->scans, "d" ); |
4080 | DUMP_VAR(reset_backoff, "lld" ); |
4081 | |
4082 | return len; |
4083 | } |
4084 | |
4085 | static DEVICE_ATTR_RO(internals); |
4086 | |
4087 | static ssize_t bssinfo_show(struct device *d, struct device_attribute *attr, |
4088 | char *buf) |
4089 | { |
4090 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4091 | char essid[IW_ESSID_MAX_SIZE + 1]; |
4092 | u8 bssid[ETH_ALEN]; |
4093 | u32 chan = 0; |
4094 | char *out = buf; |
4095 | unsigned int length; |
4096 | int ret; |
4097 | |
4098 | if (priv->status & STATUS_RF_KILL_MASK) |
4099 | return 0; |
4100 | |
4101 | memset(essid, 0, sizeof(essid)); |
4102 | memset(bssid, 0, sizeof(bssid)); |
4103 | |
4104 | length = IW_ESSID_MAX_SIZE; |
4105 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ASSN_SSID, val: essid, len: &length); |
4106 | if (ret) |
4107 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
4108 | __LINE__); |
4109 | |
4110 | length = sizeof(bssid); |
4111 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ASSN_AP_BSSID, |
4112 | val: bssid, len: &length); |
4113 | if (ret) |
4114 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
4115 | __LINE__); |
4116 | |
4117 | length = sizeof(u32); |
4118 | ret = ipw2100_get_ordinal(priv, ord: IPW_ORD_OUR_FREQ, val: &chan, len: &length); |
4119 | if (ret) |
4120 | IPW_DEBUG_INFO("failed querying ordinals at line %d\n" , |
4121 | __LINE__); |
4122 | |
4123 | out += sprintf(buf: out, fmt: "ESSID: %s\n" , essid); |
4124 | out += sprintf(buf: out, fmt: "BSSID: %pM\n" , bssid); |
4125 | out += sprintf(buf: out, fmt: "Channel: %d\n" , chan); |
4126 | |
4127 | return out - buf; |
4128 | } |
4129 | |
4130 | static DEVICE_ATTR_RO(bssinfo); |
4131 | |
4132 | #ifdef CONFIG_IPW2100_DEBUG |
4133 | static ssize_t debug_level_show(struct device_driver *d, char *buf) |
4134 | { |
4135 | return sprintf(buf, fmt: "0x%08X\n" , ipw2100_debug_level); |
4136 | } |
4137 | |
4138 | static ssize_t debug_level_store(struct device_driver *d, |
4139 | const char *buf, size_t count) |
4140 | { |
4141 | u32 val; |
4142 | int ret; |
4143 | |
4144 | ret = kstrtou32(s: buf, base: 0, res: &val); |
4145 | if (ret) |
4146 | IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n" , buf); |
4147 | else |
4148 | ipw2100_debug_level = val; |
4149 | |
4150 | return strnlen(p: buf, maxlen: count); |
4151 | } |
4152 | static DRIVER_ATTR_RW(debug_level); |
4153 | #endif /* CONFIG_IPW2100_DEBUG */ |
4154 | |
4155 | static ssize_t fatal_error_show(struct device *d, |
4156 | struct device_attribute *attr, char *buf) |
4157 | { |
4158 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4159 | char *out = buf; |
4160 | int i; |
4161 | |
4162 | if (priv->fatal_error) |
4163 | out += sprintf(buf: out, fmt: "0x%08X\n" , priv->fatal_error); |
4164 | else |
4165 | out += sprintf(buf: out, fmt: "0\n" ); |
4166 | |
4167 | for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) { |
4168 | if (!priv->fatal_errors[(priv->fatal_index - i) % |
4169 | IPW2100_ERROR_QUEUE]) |
4170 | continue; |
4171 | |
4172 | out += sprintf(buf: out, fmt: "%d. 0x%08X\n" , i, |
4173 | priv->fatal_errors[(priv->fatal_index - i) % |
4174 | IPW2100_ERROR_QUEUE]); |
4175 | } |
4176 | |
4177 | return out - buf; |
4178 | } |
4179 | |
4180 | static ssize_t fatal_error_store(struct device *d, |
4181 | struct device_attribute *attr, const char *buf, |
4182 | size_t count) |
4183 | { |
4184 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4185 | schedule_reset(priv); |
4186 | return count; |
4187 | } |
4188 | |
4189 | static DEVICE_ATTR_RW(fatal_error); |
4190 | |
4191 | static ssize_t scan_age_show(struct device *d, struct device_attribute *attr, |
4192 | char *buf) |
4193 | { |
4194 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4195 | return sprintf(buf, fmt: "%d\n" , priv->ieee->scan_age); |
4196 | } |
4197 | |
4198 | static ssize_t scan_age_store(struct device *d, struct device_attribute *attr, |
4199 | const char *buf, size_t count) |
4200 | { |
4201 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4202 | struct net_device *dev = priv->net_dev; |
4203 | unsigned long val; |
4204 | int ret; |
4205 | |
4206 | (void)dev; /* kill unused-var warning for debug-only code */ |
4207 | |
4208 | IPW_DEBUG_INFO("enter\n" ); |
4209 | |
4210 | ret = kstrtoul(s: buf, base: 0, res: &val); |
4211 | if (ret) { |
4212 | IPW_DEBUG_INFO("%s: user supplied invalid value.\n" , dev->name); |
4213 | } else { |
4214 | priv->ieee->scan_age = val; |
4215 | IPW_DEBUG_INFO("set scan_age = %u\n" , priv->ieee->scan_age); |
4216 | } |
4217 | |
4218 | IPW_DEBUG_INFO("exit\n" ); |
4219 | return strnlen(p: buf, maxlen: count); |
4220 | } |
4221 | |
4222 | static DEVICE_ATTR_RW(scan_age); |
4223 | |
4224 | static ssize_t rf_kill_show(struct device *d, struct device_attribute *attr, |
4225 | char *buf) |
4226 | { |
4227 | /* 0 - RF kill not enabled |
4228 | 1 - SW based RF kill active (sysfs) |
4229 | 2 - HW based RF kill active |
4230 | 3 - Both HW and SW baed RF kill active */ |
4231 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4232 | int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) | |
4233 | (rf_kill_active(priv) ? 0x2 : 0x0); |
4234 | return sprintf(buf, fmt: "%i\n" , val); |
4235 | } |
4236 | |
4237 | static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio) |
4238 | { |
4239 | if ((disable_radio ? 1 : 0) == |
4240 | (priv->status & STATUS_RF_KILL_SW ? 1 : 0)) |
4241 | return 0; |
4242 | |
4243 | IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n" , |
4244 | disable_radio ? "OFF" : "ON" ); |
4245 | |
4246 | mutex_lock(&priv->action_mutex); |
4247 | |
4248 | if (disable_radio) { |
4249 | priv->status |= STATUS_RF_KILL_SW; |
4250 | ipw2100_down(priv); |
4251 | } else { |
4252 | priv->status &= ~STATUS_RF_KILL_SW; |
4253 | if (rf_kill_active(priv)) { |
4254 | IPW_DEBUG_RF_KILL("Can not turn radio back on - " |
4255 | "disabled by HW switch\n" ); |
4256 | /* Make sure the RF_KILL check timer is running */ |
4257 | priv->stop_rf_kill = 0; |
4258 | mod_delayed_work(wq: system_wq, dwork: &priv->rf_kill, |
4259 | delay: round_jiffies_relative(HZ)); |
4260 | } else |
4261 | schedule_reset(priv); |
4262 | } |
4263 | |
4264 | mutex_unlock(lock: &priv->action_mutex); |
4265 | return 1; |
4266 | } |
4267 | |
4268 | static ssize_t rf_kill_store(struct device *d, struct device_attribute *attr, |
4269 | const char *buf, size_t count) |
4270 | { |
4271 | struct ipw2100_priv *priv = dev_get_drvdata(dev: d); |
4272 | ipw_radio_kill_sw(priv, disable_radio: buf[0] == '1'); |
4273 | return count; |
4274 | } |
4275 | |
4276 | static DEVICE_ATTR_RW(rf_kill); |
4277 | |
4278 | static struct attribute *ipw2100_sysfs_entries[] = { |
4279 | &dev_attr_hardware.attr, |
4280 | &dev_attr_registers.attr, |
4281 | &dev_attr_ordinals.attr, |
4282 | &dev_attr_pci.attr, |
4283 | &dev_attr_stats.attr, |
4284 | &dev_attr_internals.attr, |
4285 | &dev_attr_bssinfo.attr, |
4286 | &dev_attr_memory.attr, |
4287 | &dev_attr_scan_age.attr, |
4288 | &dev_attr_fatal_error.attr, |
4289 | &dev_attr_rf_kill.attr, |
4290 | &dev_attr_cfg.attr, |
4291 | &dev_attr_status.attr, |
4292 | &dev_attr_capability.attr, |
4293 | NULL, |
4294 | }; |
4295 | |
4296 | static const struct attribute_group ipw2100_attribute_group = { |
4297 | .attrs = ipw2100_sysfs_entries, |
4298 | }; |
4299 | |
4300 | static int status_queue_allocate(struct ipw2100_priv *priv, int entries) |
4301 | { |
4302 | struct ipw2100_status_queue *q = &priv->status_queue; |
4303 | |
4304 | IPW_DEBUG_INFO("enter\n" ); |
4305 | |
4306 | q->size = entries * sizeof(struct ipw2100_status); |
4307 | q->drv = dma_alloc_coherent(dev: &priv->pci_dev->dev, size: q->size, dma_handle: &q->nic, |
4308 | GFP_KERNEL); |
4309 | if (!q->drv) { |
4310 | IPW_DEBUG_WARNING("Can not allocate status queue.\n" ); |
4311 | return -ENOMEM; |
4312 | } |
4313 | |
4314 | IPW_DEBUG_INFO("exit\n" ); |
4315 | |
4316 | return 0; |
4317 | } |
4318 | |
4319 | static void status_queue_free(struct ipw2100_priv *priv) |
4320 | { |
4321 | IPW_DEBUG_INFO("enter\n" ); |
4322 | |
4323 | if (priv->status_queue.drv) { |
4324 | dma_free_coherent(dev: &priv->pci_dev->dev, |
4325 | size: priv->status_queue.size, |
4326 | cpu_addr: priv->status_queue.drv, |
4327 | dma_handle: priv->status_queue.nic); |
4328 | priv->status_queue.drv = NULL; |
4329 | } |
4330 | |
4331 | IPW_DEBUG_INFO("exit\n" ); |
4332 | } |
4333 | |
4334 | static int bd_queue_allocate(struct ipw2100_priv *priv, |
4335 | struct ipw2100_bd_queue *q, int entries) |
4336 | { |
4337 | IPW_DEBUG_INFO("enter\n" ); |
4338 | |
4339 | memset(q, 0, sizeof(struct ipw2100_bd_queue)); |
4340 | |
4341 | q->entries = entries; |
4342 | q->size = entries * sizeof(struct ipw2100_bd); |
4343 | q->drv = dma_alloc_coherent(dev: &priv->pci_dev->dev, size: q->size, dma_handle: &q->nic, |
4344 | GFP_KERNEL); |
4345 | if (!q->drv) { |
4346 | IPW_DEBUG_INFO |
4347 | ("can't allocate shared memory for buffer descriptors\n" ); |
4348 | return -ENOMEM; |
4349 | } |
4350 | |
4351 | IPW_DEBUG_INFO("exit\n" ); |
4352 | |
4353 | return 0; |
4354 | } |
4355 | |
4356 | static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q) |
4357 | { |
4358 | IPW_DEBUG_INFO("enter\n" ); |
4359 | |
4360 | if (!q) |
4361 | return; |
4362 | |
4363 | if (q->drv) { |
4364 | dma_free_coherent(dev: &priv->pci_dev->dev, size: q->size, cpu_addr: q->drv, |
4365 | dma_handle: q->nic); |
4366 | q->drv = NULL; |
4367 | } |
4368 | |
4369 | IPW_DEBUG_INFO("exit\n" ); |
4370 | } |
4371 | |
4372 | static void bd_queue_initialize(struct ipw2100_priv *priv, |
4373 | struct ipw2100_bd_queue *q, u32 base, u32 size, |
4374 | u32 r, u32 w) |
4375 | { |
4376 | IPW_DEBUG_INFO("enter\n" ); |
4377 | |
4378 | IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n" , q->drv, |
4379 | (u32) q->nic); |
4380 | |
4381 | write_register(dev: priv->net_dev, reg: base, val: q->nic); |
4382 | write_register(dev: priv->net_dev, reg: size, val: q->entries); |
4383 | write_register(dev: priv->net_dev, reg: r, val: q->oldest); |
4384 | write_register(dev: priv->net_dev, reg: w, val: q->next); |
4385 | |
4386 | IPW_DEBUG_INFO("exit\n" ); |
4387 | } |
4388 | |
4389 | static void ipw2100_kill_works(struct ipw2100_priv *priv) |
4390 | { |
4391 | priv->stop_rf_kill = 1; |
4392 | priv->stop_hang_check = 1; |
4393 | cancel_delayed_work_sync(dwork: &priv->reset_work); |
4394 | cancel_delayed_work_sync(dwork: &priv->security_work); |
4395 | cancel_delayed_work_sync(dwork: &priv->wx_event_work); |
4396 | cancel_delayed_work_sync(dwork: &priv->hang_check); |
4397 | cancel_delayed_work_sync(dwork: &priv->rf_kill); |
4398 | cancel_delayed_work_sync(dwork: &priv->scan_event); |
4399 | } |
4400 | |
4401 | static int ipw2100_tx_allocate(struct ipw2100_priv *priv) |
4402 | { |
4403 | int i, j, err; |
4404 | void *v; |
4405 | dma_addr_t p; |
4406 | |
4407 | IPW_DEBUG_INFO("enter\n" ); |
4408 | |
4409 | err = bd_queue_allocate(priv, q: &priv->tx_queue, TX_QUEUE_LENGTH); |
4410 | if (err) { |
4411 | IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n" , |
4412 | priv->net_dev->name); |
4413 | return err; |
4414 | } |
4415 | |
4416 | priv->tx_buffers = kmalloc_array(TX_PENDED_QUEUE_LENGTH, |
4417 | size: sizeof(struct ipw2100_tx_packet), |
4418 | GFP_KERNEL); |
4419 | if (!priv->tx_buffers) { |
4420 | bd_queue_free(priv, q: &priv->tx_queue); |
4421 | return -ENOMEM; |
4422 | } |
4423 | |
4424 | for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
4425 | v = dma_alloc_coherent(dev: &priv->pci_dev->dev, |
4426 | size: sizeof(struct ipw2100_data_header), dma_handle: &p, |
4427 | GFP_KERNEL); |
4428 | if (!v) { |
4429 | printk(KERN_ERR DRV_NAME |
4430 | ": %s: PCI alloc failed for tx " "buffers.\n" , |
4431 | priv->net_dev->name); |
4432 | err = -ENOMEM; |
4433 | break; |
4434 | } |
4435 | |
4436 | priv->tx_buffers[i].type = DATA; |
4437 | priv->tx_buffers[i].info.d_struct.data = |
4438 | (struct ipw2100_data_header *)v; |
4439 | priv->tx_buffers[i].info.d_struct.data_phys = p; |
4440 | priv->tx_buffers[i].info.d_struct.txb = NULL; |
4441 | } |
4442 | |
4443 | if (i == TX_PENDED_QUEUE_LENGTH) |
4444 | return 0; |
4445 | |
4446 | for (j = 0; j < i; j++) { |
4447 | dma_free_coherent(dev: &priv->pci_dev->dev, |
4448 | size: sizeof(struct ipw2100_data_header), |
4449 | cpu_addr: priv->tx_buffers[j].info.d_struct.data, |
4450 | dma_handle: priv->tx_buffers[j].info.d_struct.data_phys); |
4451 | } |
4452 | |
4453 | kfree(objp: priv->tx_buffers); |
4454 | priv->tx_buffers = NULL; |
4455 | |
4456 | return err; |
4457 | } |
4458 | |
4459 | static void ipw2100_tx_initialize(struct ipw2100_priv *priv) |
4460 | { |
4461 | int i; |
4462 | |
4463 | IPW_DEBUG_INFO("enter\n" ); |
4464 | |
4465 | /* |
4466 | * reinitialize packet info lists |
4467 | */ |
4468 | INIT_LIST_HEAD(list: &priv->fw_pend_list); |
4469 | INIT_STAT(&priv->fw_pend_stat); |
4470 | |
4471 | /* |
4472 | * reinitialize lists |
4473 | */ |
4474 | INIT_LIST_HEAD(list: &priv->tx_pend_list); |
4475 | INIT_LIST_HEAD(list: &priv->tx_free_list); |
4476 | INIT_STAT(&priv->tx_pend_stat); |
4477 | INIT_STAT(&priv->tx_free_stat); |
4478 | |
4479 | for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
4480 | /* We simply drop any SKBs that have been queued for |
4481 | * transmit */ |
4482 | if (priv->tx_buffers[i].info.d_struct.txb) { |
4483 | libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
4484 | txb); |
4485 | priv->tx_buffers[i].info.d_struct.txb = NULL; |
4486 | } |
4487 | |
4488 | list_add_tail(new: &priv->tx_buffers[i].list, head: &priv->tx_free_list); |
4489 | } |
4490 | |
4491 | SET_STAT(&priv->tx_free_stat, i); |
4492 | |
4493 | priv->tx_queue.oldest = 0; |
4494 | priv->tx_queue.available = priv->tx_queue.entries; |
4495 | priv->tx_queue.next = 0; |
4496 | INIT_STAT(&priv->txq_stat); |
4497 | SET_STAT(&priv->txq_stat, priv->tx_queue.available); |
4498 | |
4499 | bd_queue_initialize(priv, q: &priv->tx_queue, |
4500 | IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE, |
4501 | IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE, |
4502 | IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX, |
4503 | IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX); |
4504 | |
4505 | IPW_DEBUG_INFO("exit\n" ); |
4506 | |
4507 | } |
4508 | |
4509 | static void ipw2100_tx_free(struct ipw2100_priv *priv) |
4510 | { |
4511 | int i; |
4512 | |
4513 | IPW_DEBUG_INFO("enter\n" ); |
4514 | |
4515 | bd_queue_free(priv, q: &priv->tx_queue); |
4516 | |
4517 | if (!priv->tx_buffers) |
4518 | return; |
4519 | |
4520 | for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) { |
4521 | if (priv->tx_buffers[i].info.d_struct.txb) { |
4522 | libipw_txb_free(priv->tx_buffers[i].info.d_struct. |
4523 | txb); |
4524 | priv->tx_buffers[i].info.d_struct.txb = NULL; |
4525 | } |
4526 | if (priv->tx_buffers[i].info.d_struct.data) |
4527 | dma_free_coherent(dev: &priv->pci_dev->dev, |
4528 | size: sizeof(struct ipw2100_data_header), |
4529 | cpu_addr: priv->tx_buffers[i].info.d_struct.data, |
4530 | dma_handle: priv->tx_buffers[i].info.d_struct.data_phys); |
4531 | } |
4532 | |
4533 | kfree(objp: priv->tx_buffers); |
4534 | priv->tx_buffers = NULL; |
4535 | |
4536 | IPW_DEBUG_INFO("exit\n" ); |
4537 | } |
4538 | |
4539 | static int ipw2100_rx_allocate(struct ipw2100_priv *priv) |
4540 | { |
4541 | int i, j, err = -EINVAL; |
4542 | |
4543 | IPW_DEBUG_INFO("enter\n" ); |
4544 | |
4545 | err = bd_queue_allocate(priv, q: &priv->rx_queue, RX_QUEUE_LENGTH); |
4546 | if (err) { |
4547 | IPW_DEBUG_INFO("failed bd_queue_allocate\n" ); |
4548 | return err; |
4549 | } |
4550 | |
4551 | err = status_queue_allocate(priv, RX_QUEUE_LENGTH); |
4552 | if (err) { |
4553 | IPW_DEBUG_INFO("failed status_queue_allocate\n" ); |
4554 | bd_queue_free(priv, q: &priv->rx_queue); |
4555 | return err; |
4556 | } |
4557 | |
4558 | /* |
4559 | * allocate packets |
4560 | */ |
4561 | priv->rx_buffers = kmalloc_array(RX_QUEUE_LENGTH, |
4562 | size: sizeof(struct ipw2100_rx_packet), |
4563 | GFP_KERNEL); |
4564 | if (!priv->rx_buffers) { |
4565 | IPW_DEBUG_INFO("can't allocate rx packet buffer table\n" ); |
4566 | |
4567 | bd_queue_free(priv, q: &priv->rx_queue); |
4568 | |
4569 | status_queue_free(priv); |
4570 | |
4571 | return -ENOMEM; |
4572 | } |
4573 | |
4574 | for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
4575 | struct ipw2100_rx_packet *packet = &priv->rx_buffers[i]; |
4576 | |
4577 | err = ipw2100_alloc_skb(priv, packet); |
4578 | if (unlikely(err)) { |
4579 | err = -ENOMEM; |
4580 | break; |
4581 | } |
4582 | |
4583 | /* The BD holds the cache aligned address */ |
4584 | priv->rx_queue.drv[i].host_addr = packet->dma_addr; |
4585 | priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH; |
4586 | priv->status_queue.drv[i].status_fields = 0; |
4587 | } |
4588 | |
4589 | if (i == RX_QUEUE_LENGTH) |
4590 | return 0; |
4591 | |
4592 | for (j = 0; j < i; j++) { |
4593 | dma_unmap_single(&priv->pci_dev->dev, |
4594 | priv->rx_buffers[j].dma_addr, |
4595 | sizeof(struct ipw2100_rx_packet), |
4596 | DMA_FROM_DEVICE); |
4597 | dev_kfree_skb(priv->rx_buffers[j].skb); |
4598 | } |
4599 | |
4600 | kfree(objp: priv->rx_buffers); |
4601 | priv->rx_buffers = NULL; |
4602 | |
4603 | bd_queue_free(priv, q: &priv->rx_queue); |
4604 | |
4605 | status_queue_free(priv); |
4606 | |
4607 | return err; |
4608 | } |
4609 | |
4610 | static void ipw2100_rx_initialize(struct ipw2100_priv *priv) |
4611 | { |
4612 | IPW_DEBUG_INFO("enter\n" ); |
4613 | |
4614 | priv->rx_queue.oldest = 0; |
4615 | priv->rx_queue.available = priv->rx_queue.entries - 1; |
4616 | priv->rx_queue.next = priv->rx_queue.entries - 1; |
4617 | |
4618 | INIT_STAT(&priv->rxq_stat); |
4619 | SET_STAT(&priv->rxq_stat, priv->rx_queue.available); |
4620 | |
4621 | bd_queue_initialize(priv, q: &priv->rx_queue, |
4622 | IPW_MEM_HOST_SHARED_RX_BD_BASE, |
4623 | IPW_MEM_HOST_SHARED_RX_BD_SIZE, |
4624 | IPW_MEM_HOST_SHARED_RX_READ_INDEX, |
4625 | IPW_MEM_HOST_SHARED_RX_WRITE_INDEX); |
4626 | |
4627 | /* set up the status queue */ |
4628 | write_register(dev: priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE, |
4629 | val: priv->status_queue.nic); |
4630 | |
4631 | IPW_DEBUG_INFO("exit\n" ); |
4632 | } |
4633 | |
4634 | static void ipw2100_rx_free(struct ipw2100_priv *priv) |
4635 | { |
4636 | int i; |
4637 | |
4638 | IPW_DEBUG_INFO("enter\n" ); |
4639 | |
4640 | bd_queue_free(priv, q: &priv->rx_queue); |
4641 | status_queue_free(priv); |
4642 | |
4643 | if (!priv->rx_buffers) |
4644 | return; |
4645 | |
4646 | for (i = 0; i < RX_QUEUE_LENGTH; i++) { |
4647 | if (priv->rx_buffers[i].rxp) { |
4648 | dma_unmap_single(&priv->pci_dev->dev, |
4649 | priv->rx_buffers[i].dma_addr, |
4650 | sizeof(struct ipw2100_rx), |
4651 | DMA_FROM_DEVICE); |
4652 | dev_kfree_skb(priv->rx_buffers[i].skb); |
4653 | } |
4654 | } |
4655 | |
4656 | kfree(objp: priv->rx_buffers); |
4657 | priv->rx_buffers = NULL; |
4658 | |
4659 | IPW_DEBUG_INFO("exit\n" ); |
4660 | } |
4661 | |
4662 | static int ipw2100_read_mac_address(struct ipw2100_priv *priv) |
4663 | { |
4664 | u32 length = ETH_ALEN; |
4665 | u8 addr[ETH_ALEN]; |
4666 | |
4667 | int err; |
4668 | |
4669 | err = ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ADAPTER_MAC, val: addr, len: &length); |
4670 | if (err) { |
4671 | IPW_DEBUG_INFO("MAC address read failed\n" ); |
4672 | return -EIO; |
4673 | } |
4674 | |
4675 | eth_hw_addr_set(dev: priv->net_dev, addr); |
4676 | IPW_DEBUG_INFO("card MAC is %pM\n" , priv->net_dev->dev_addr); |
4677 | |
4678 | return 0; |
4679 | } |
4680 | |
4681 | /******************************************************************** |
4682 | * |
4683 | * Firmware Commands |
4684 | * |
4685 | ********************************************************************/ |
4686 | |
4687 | static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode) |
4688 | { |
4689 | struct host_command cmd = { |
4690 | .host_command = ADAPTER_ADDRESS, |
4691 | .host_command_sequence = 0, |
4692 | .host_command_length = ETH_ALEN |
4693 | }; |
4694 | int err; |
4695 | |
4696 | IPW_DEBUG_HC("SET_MAC_ADDRESS\n" ); |
4697 | |
4698 | IPW_DEBUG_INFO("enter\n" ); |
4699 | |
4700 | if (priv->config & CFG_CUSTOM_MAC) { |
4701 | memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN); |
4702 | eth_hw_addr_set(dev: priv->net_dev, addr: priv->mac_addr); |
4703 | } else |
4704 | memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr, |
4705 | ETH_ALEN); |
4706 | |
4707 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4708 | |
4709 | IPW_DEBUG_INFO("exit\n" ); |
4710 | return err; |
4711 | } |
4712 | |
4713 | static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type, |
4714 | int batch_mode) |
4715 | { |
4716 | struct host_command cmd = { |
4717 | .host_command = PORT_TYPE, |
4718 | .host_command_sequence = 0, |
4719 | .host_command_length = sizeof(u32) |
4720 | }; |
4721 | int err; |
4722 | |
4723 | switch (port_type) { |
4724 | case IW_MODE_INFRA: |
4725 | cmd.host_command_parameters[0] = IPW_BSS; |
4726 | break; |
4727 | case IW_MODE_ADHOC: |
4728 | cmd.host_command_parameters[0] = IPW_IBSS; |
4729 | break; |
4730 | } |
4731 | |
4732 | IPW_DEBUG_HC("PORT_TYPE: %s\n" , |
4733 | port_type == IPW_IBSS ? "Ad-Hoc" : "Managed" ); |
4734 | |
4735 | if (!batch_mode) { |
4736 | err = ipw2100_disable_adapter(priv); |
4737 | if (err) { |
4738 | printk(KERN_ERR DRV_NAME |
4739 | ": %s: Could not disable adapter %d\n" , |
4740 | priv->net_dev->name, err); |
4741 | return err; |
4742 | } |
4743 | } |
4744 | |
4745 | /* send cmd to firmware */ |
4746 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4747 | |
4748 | if (!batch_mode) |
4749 | ipw2100_enable_adapter(priv); |
4750 | |
4751 | return err; |
4752 | } |
4753 | |
4754 | static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, |
4755 | int batch_mode) |
4756 | { |
4757 | struct host_command cmd = { |
4758 | .host_command = CHANNEL, |
4759 | .host_command_sequence = 0, |
4760 | .host_command_length = sizeof(u32) |
4761 | }; |
4762 | int err; |
4763 | |
4764 | cmd.host_command_parameters[0] = channel; |
4765 | |
4766 | IPW_DEBUG_HC("CHANNEL: %d\n" , channel); |
4767 | |
4768 | /* If BSS then we don't support channel selection */ |
4769 | if (priv->ieee->iw_mode == IW_MODE_INFRA) |
4770 | return 0; |
4771 | |
4772 | if ((channel != 0) && |
4773 | ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL))) |
4774 | return -EINVAL; |
4775 | |
4776 | if (!batch_mode) { |
4777 | err = ipw2100_disable_adapter(priv); |
4778 | if (err) |
4779 | return err; |
4780 | } |
4781 | |
4782 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4783 | if (err) { |
4784 | IPW_DEBUG_INFO("Failed to set channel to %d" , channel); |
4785 | return err; |
4786 | } |
4787 | |
4788 | if (channel) |
4789 | priv->config |= CFG_STATIC_CHANNEL; |
4790 | else |
4791 | priv->config &= ~CFG_STATIC_CHANNEL; |
4792 | |
4793 | priv->channel = channel; |
4794 | |
4795 | if (!batch_mode) { |
4796 | err = ipw2100_enable_adapter(priv); |
4797 | if (err) |
4798 | return err; |
4799 | } |
4800 | |
4801 | return 0; |
4802 | } |
4803 | |
4804 | static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode) |
4805 | { |
4806 | struct host_command cmd = { |
4807 | .host_command = SYSTEM_CONFIG, |
4808 | .host_command_sequence = 0, |
4809 | .host_command_length = 12, |
4810 | }; |
4811 | u32 ibss_mask, len = sizeof(u32); |
4812 | int err; |
4813 | |
4814 | /* Set system configuration */ |
4815 | |
4816 | if (!batch_mode) { |
4817 | err = ipw2100_disable_adapter(priv); |
4818 | if (err) |
4819 | return err; |
4820 | } |
4821 | |
4822 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
4823 | cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START; |
4824 | |
4825 | cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK | |
4826 | IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE; |
4827 | |
4828 | if (!(priv->config & CFG_LONG_PREAMBLE)) |
4829 | cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO; |
4830 | |
4831 | err = ipw2100_get_ordinal(priv, |
4832 | ord: IPW_ORD_EEPROM_IBSS_11B_CHANNELS, |
4833 | val: &ibss_mask, len: &len); |
4834 | if (err) |
4835 | ibss_mask = IPW_IBSS_11B_DEFAULT_MASK; |
4836 | |
4837 | cmd.host_command_parameters[1] = REG_CHANNEL_MASK; |
4838 | cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask; |
4839 | |
4840 | /* 11b only */ |
4841 | /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */ |
4842 | |
4843 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4844 | if (err) |
4845 | return err; |
4846 | |
4847 | /* If IPv6 is configured in the kernel then we don't want to filter out all |
4848 | * of the multicast packets as IPv6 needs some. */ |
4849 | #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) |
4850 | cmd.host_command = ADD_MULTICAST; |
4851 | cmd.host_command_sequence = 0; |
4852 | cmd.host_command_length = 0; |
4853 | |
4854 | ipw2100_hw_send_command(priv, &cmd); |
4855 | #endif |
4856 | if (!batch_mode) { |
4857 | err = ipw2100_enable_adapter(priv); |
4858 | if (err) |
4859 | return err; |
4860 | } |
4861 | |
4862 | return 0; |
4863 | } |
4864 | |
4865 | static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, |
4866 | int batch_mode) |
4867 | { |
4868 | struct host_command cmd = { |
4869 | .host_command = BASIC_TX_RATES, |
4870 | .host_command_sequence = 0, |
4871 | .host_command_length = 4 |
4872 | }; |
4873 | int err; |
4874 | |
4875 | cmd.host_command_parameters[0] = rate & TX_RATE_MASK; |
4876 | |
4877 | if (!batch_mode) { |
4878 | err = ipw2100_disable_adapter(priv); |
4879 | if (err) |
4880 | return err; |
4881 | } |
4882 | |
4883 | /* Set BASIC TX Rate first */ |
4884 | ipw2100_hw_send_command(priv, cmd: &cmd); |
4885 | |
4886 | /* Set TX Rate */ |
4887 | cmd.host_command = TX_RATES; |
4888 | ipw2100_hw_send_command(priv, cmd: &cmd); |
4889 | |
4890 | /* Set MSDU TX Rate */ |
4891 | cmd.host_command = MSDU_TX_RATES; |
4892 | ipw2100_hw_send_command(priv, cmd: &cmd); |
4893 | |
4894 | if (!batch_mode) { |
4895 | err = ipw2100_enable_adapter(priv); |
4896 | if (err) |
4897 | return err; |
4898 | } |
4899 | |
4900 | priv->tx_rates = rate; |
4901 | |
4902 | return 0; |
4903 | } |
4904 | |
4905 | static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level) |
4906 | { |
4907 | struct host_command cmd = { |
4908 | .host_command = POWER_MODE, |
4909 | .host_command_sequence = 0, |
4910 | .host_command_length = 4 |
4911 | }; |
4912 | int err; |
4913 | |
4914 | cmd.host_command_parameters[0] = power_level; |
4915 | |
4916 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4917 | if (err) |
4918 | return err; |
4919 | |
4920 | if (power_level == IPW_POWER_MODE_CAM) |
4921 | priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
4922 | else |
4923 | priv->power_mode = IPW_POWER_ENABLED | power_level; |
4924 | |
4925 | #ifdef IPW2100_TX_POWER |
4926 | if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) { |
4927 | /* Set beacon interval */ |
4928 | cmd.host_command = TX_POWER_INDEX; |
4929 | cmd.host_command_parameters[0] = (u32) priv->adhoc_power; |
4930 | |
4931 | err = ipw2100_hw_send_command(priv, &cmd); |
4932 | if (err) |
4933 | return err; |
4934 | } |
4935 | #endif |
4936 | |
4937 | return 0; |
4938 | } |
4939 | |
4940 | static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold) |
4941 | { |
4942 | struct host_command cmd = { |
4943 | .host_command = RTS_THRESHOLD, |
4944 | .host_command_sequence = 0, |
4945 | .host_command_length = 4 |
4946 | }; |
4947 | int err; |
4948 | |
4949 | if (threshold & RTS_DISABLED) |
4950 | cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD; |
4951 | else |
4952 | cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED; |
4953 | |
4954 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
4955 | if (err) |
4956 | return err; |
4957 | |
4958 | priv->rts_threshold = threshold; |
4959 | |
4960 | return 0; |
4961 | } |
4962 | |
4963 | #if 0 |
4964 | int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv, |
4965 | u32 threshold, int batch_mode) |
4966 | { |
4967 | struct host_command cmd = { |
4968 | .host_command = FRAG_THRESHOLD, |
4969 | .host_command_sequence = 0, |
4970 | .host_command_length = 4, |
4971 | .host_command_parameters[0] = 0, |
4972 | }; |
4973 | int err; |
4974 | |
4975 | if (!batch_mode) { |
4976 | err = ipw2100_disable_adapter(priv); |
4977 | if (err) |
4978 | return err; |
4979 | } |
4980 | |
4981 | if (threshold == 0) |
4982 | threshold = DEFAULT_FRAG_THRESHOLD; |
4983 | else { |
4984 | threshold = max(threshold, MIN_FRAG_THRESHOLD); |
4985 | threshold = min(threshold, MAX_FRAG_THRESHOLD); |
4986 | } |
4987 | |
4988 | cmd.host_command_parameters[0] = threshold; |
4989 | |
4990 | IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n" , threshold); |
4991 | |
4992 | err = ipw2100_hw_send_command(priv, &cmd); |
4993 | |
4994 | if (!batch_mode) |
4995 | ipw2100_enable_adapter(priv); |
4996 | |
4997 | if (!err) |
4998 | priv->frag_threshold = threshold; |
4999 | |
5000 | return err; |
5001 | } |
5002 | #endif |
5003 | |
5004 | static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry) |
5005 | { |
5006 | struct host_command cmd = { |
5007 | .host_command = SHORT_RETRY_LIMIT, |
5008 | .host_command_sequence = 0, |
5009 | .host_command_length = 4 |
5010 | }; |
5011 | int err; |
5012 | |
5013 | cmd.host_command_parameters[0] = retry; |
5014 | |
5015 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5016 | if (err) |
5017 | return err; |
5018 | |
5019 | priv->short_retry_limit = retry; |
5020 | |
5021 | return 0; |
5022 | } |
5023 | |
5024 | static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry) |
5025 | { |
5026 | struct host_command cmd = { |
5027 | .host_command = LONG_RETRY_LIMIT, |
5028 | .host_command_sequence = 0, |
5029 | .host_command_length = 4 |
5030 | }; |
5031 | int err; |
5032 | |
5033 | cmd.host_command_parameters[0] = retry; |
5034 | |
5035 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5036 | if (err) |
5037 | return err; |
5038 | |
5039 | priv->long_retry_limit = retry; |
5040 | |
5041 | return 0; |
5042 | } |
5043 | |
5044 | static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid, |
5045 | int batch_mode) |
5046 | { |
5047 | struct host_command cmd = { |
5048 | .host_command = MANDATORY_BSSID, |
5049 | .host_command_sequence = 0, |
5050 | .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN |
5051 | }; |
5052 | int err; |
5053 | |
5054 | #ifdef CONFIG_IPW2100_DEBUG |
5055 | if (bssid != NULL) |
5056 | IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n" , bssid); |
5057 | else |
5058 | IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n" ); |
5059 | #endif |
5060 | /* if BSSID is empty then we disable mandatory bssid mode */ |
5061 | if (bssid != NULL) |
5062 | memcpy(cmd.host_command_parameters, bssid, ETH_ALEN); |
5063 | |
5064 | if (!batch_mode) { |
5065 | err = ipw2100_disable_adapter(priv); |
5066 | if (err) |
5067 | return err; |
5068 | } |
5069 | |
5070 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5071 | |
5072 | if (!batch_mode) |
5073 | ipw2100_enable_adapter(priv); |
5074 | |
5075 | return err; |
5076 | } |
5077 | |
5078 | static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv) |
5079 | { |
5080 | struct host_command cmd = { |
5081 | .host_command = DISASSOCIATION_BSSID, |
5082 | .host_command_sequence = 0, |
5083 | .host_command_length = ETH_ALEN |
5084 | }; |
5085 | int err; |
5086 | |
5087 | IPW_DEBUG_HC("DISASSOCIATION_BSSID\n" ); |
5088 | |
5089 | /* The Firmware currently ignores the BSSID and just disassociates from |
5090 | * the currently associated AP -- but in the off chance that a future |
5091 | * firmware does use the BSSID provided here, we go ahead and try and |
5092 | * set it to the currently associated AP's BSSID */ |
5093 | memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN); |
5094 | |
5095 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5096 | |
5097 | return err; |
5098 | } |
5099 | |
5100 | static int ipw2100_set_wpa_ie(struct ipw2100_priv *, |
5101 | struct ipw2100_wpa_assoc_frame *, int) |
5102 | __attribute__ ((unused)); |
5103 | |
5104 | static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv, |
5105 | struct ipw2100_wpa_assoc_frame *wpa_frame, |
5106 | int batch_mode) |
5107 | { |
5108 | struct host_command cmd = { |
5109 | .host_command = SET_WPA_IE, |
5110 | .host_command_sequence = 0, |
5111 | .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame), |
5112 | }; |
5113 | int err; |
5114 | |
5115 | IPW_DEBUG_HC("SET_WPA_IE\n" ); |
5116 | |
5117 | if (!batch_mode) { |
5118 | err = ipw2100_disable_adapter(priv); |
5119 | if (err) |
5120 | return err; |
5121 | } |
5122 | |
5123 | memcpy(cmd.host_command_parameters, wpa_frame, |
5124 | sizeof(struct ipw2100_wpa_assoc_frame)); |
5125 | |
5126 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5127 | |
5128 | if (!batch_mode) { |
5129 | if (ipw2100_enable_adapter(priv)) |
5130 | err = -EIO; |
5131 | } |
5132 | |
5133 | return err; |
5134 | } |
5135 | |
5136 | struct security_info_params { |
5137 | u32 allowed_ciphers; |
5138 | u16 version; |
5139 | u8 auth_mode; |
5140 | u8 replay_counters_number; |
5141 | u8 unicast_using_group; |
5142 | } __packed; |
5143 | |
5144 | static int ipw2100_set_security_information(struct ipw2100_priv *priv, |
5145 | int auth_mode, |
5146 | int security_level, |
5147 | int unicast_using_group, |
5148 | int batch_mode) |
5149 | { |
5150 | struct host_command cmd = { |
5151 | .host_command = SET_SECURITY_INFORMATION, |
5152 | .host_command_sequence = 0, |
5153 | .host_command_length = sizeof(struct security_info_params) |
5154 | }; |
5155 | struct security_info_params *security = |
5156 | (struct security_info_params *)&cmd.host_command_parameters; |
5157 | int err; |
5158 | memset(security, 0, sizeof(*security)); |
5159 | |
5160 | /* If shared key AP authentication is turned on, then we need to |
5161 | * configure the firmware to try and use it. |
5162 | * |
5163 | * Actual data encryption/decryption is handled by the host. */ |
5164 | security->auth_mode = auth_mode; |
5165 | security->unicast_using_group = unicast_using_group; |
5166 | |
5167 | switch (security_level) { |
5168 | default: |
5169 | case SEC_LEVEL_0: |
5170 | security->allowed_ciphers = IPW_NONE_CIPHER; |
5171 | break; |
5172 | case SEC_LEVEL_1: |
5173 | security->allowed_ciphers = IPW_WEP40_CIPHER | |
5174 | IPW_WEP104_CIPHER; |
5175 | break; |
5176 | case SEC_LEVEL_2: |
5177 | security->allowed_ciphers = IPW_WEP40_CIPHER | |
5178 | IPW_WEP104_CIPHER | IPW_TKIP_CIPHER; |
5179 | break; |
5180 | case SEC_LEVEL_2_CKIP: |
5181 | security->allowed_ciphers = IPW_WEP40_CIPHER | |
5182 | IPW_WEP104_CIPHER | IPW_CKIP_CIPHER; |
5183 | break; |
5184 | case SEC_LEVEL_3: |
5185 | security->allowed_ciphers = IPW_WEP40_CIPHER | |
5186 | IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER; |
5187 | break; |
5188 | } |
5189 | |
5190 | IPW_DEBUG_HC |
5191 | ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n" , |
5192 | security->auth_mode, security->allowed_ciphers, security_level); |
5193 | |
5194 | security->replay_counters_number = 0; |
5195 | |
5196 | if (!batch_mode) { |
5197 | err = ipw2100_disable_adapter(priv); |
5198 | if (err) |
5199 | return err; |
5200 | } |
5201 | |
5202 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5203 | |
5204 | if (!batch_mode) |
5205 | ipw2100_enable_adapter(priv); |
5206 | |
5207 | return err; |
5208 | } |
5209 | |
5210 | static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power) |
5211 | { |
5212 | struct host_command cmd = { |
5213 | .host_command = TX_POWER_INDEX, |
5214 | .host_command_sequence = 0, |
5215 | .host_command_length = 4 |
5216 | }; |
5217 | int err = 0; |
5218 | u32 tmp = tx_power; |
5219 | |
5220 | if (tx_power != IPW_TX_POWER_DEFAULT) |
5221 | tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 / |
5222 | (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM); |
5223 | |
5224 | cmd.host_command_parameters[0] = tmp; |
5225 | |
5226 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) |
5227 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5228 | if (!err) |
5229 | priv->tx_power = tx_power; |
5230 | |
5231 | return 0; |
5232 | } |
5233 | |
5234 | static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv, |
5235 | u32 interval, int batch_mode) |
5236 | { |
5237 | struct host_command cmd = { |
5238 | .host_command = BEACON_INTERVAL, |
5239 | .host_command_sequence = 0, |
5240 | .host_command_length = 4 |
5241 | }; |
5242 | int err; |
5243 | |
5244 | cmd.host_command_parameters[0] = interval; |
5245 | |
5246 | IPW_DEBUG_INFO("enter\n" ); |
5247 | |
5248 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
5249 | if (!batch_mode) { |
5250 | err = ipw2100_disable_adapter(priv); |
5251 | if (err) |
5252 | return err; |
5253 | } |
5254 | |
5255 | ipw2100_hw_send_command(priv, cmd: &cmd); |
5256 | |
5257 | if (!batch_mode) { |
5258 | err = ipw2100_enable_adapter(priv); |
5259 | if (err) |
5260 | return err; |
5261 | } |
5262 | } |
5263 | |
5264 | IPW_DEBUG_INFO("exit\n" ); |
5265 | |
5266 | return 0; |
5267 | } |
5268 | |
5269 | static void ipw2100_queues_initialize(struct ipw2100_priv *priv) |
5270 | { |
5271 | ipw2100_tx_initialize(priv); |
5272 | ipw2100_rx_initialize(priv); |
5273 | ipw2100_msg_initialize(priv); |
5274 | } |
5275 | |
5276 | static void ipw2100_queues_free(struct ipw2100_priv *priv) |
5277 | { |
5278 | ipw2100_tx_free(priv); |
5279 | ipw2100_rx_free(priv); |
5280 | ipw2100_msg_free(priv); |
5281 | } |
5282 | |
5283 | static int ipw2100_queues_allocate(struct ipw2100_priv *priv) |
5284 | { |
5285 | if (ipw2100_tx_allocate(priv) || |
5286 | ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv)) |
5287 | goto fail; |
5288 | |
5289 | return 0; |
5290 | |
5291 | fail: |
5292 | ipw2100_tx_free(priv); |
5293 | ipw2100_rx_free(priv); |
5294 | ipw2100_msg_free(priv); |
5295 | return -ENOMEM; |
5296 | } |
5297 | |
5298 | #define IPW_PRIVACY_CAPABLE 0x0008 |
5299 | |
5300 | static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags, |
5301 | int batch_mode) |
5302 | { |
5303 | struct host_command cmd = { |
5304 | .host_command = WEP_FLAGS, |
5305 | .host_command_sequence = 0, |
5306 | .host_command_length = 4 |
5307 | }; |
5308 | int err; |
5309 | |
5310 | cmd.host_command_parameters[0] = flags; |
5311 | |
5312 | IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n" , flags); |
5313 | |
5314 | if (!batch_mode) { |
5315 | err = ipw2100_disable_adapter(priv); |
5316 | if (err) { |
5317 | printk(KERN_ERR DRV_NAME |
5318 | ": %s: Could not disable adapter %d\n" , |
5319 | priv->net_dev->name, err); |
5320 | return err; |
5321 | } |
5322 | } |
5323 | |
5324 | /* send cmd to firmware */ |
5325 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5326 | |
5327 | if (!batch_mode) |
5328 | ipw2100_enable_adapter(priv); |
5329 | |
5330 | return err; |
5331 | } |
5332 | |
5333 | struct ipw2100_wep_key { |
5334 | u8 idx; |
5335 | u8 len; |
5336 | u8 key[13]; |
5337 | }; |
5338 | |
5339 | /* Macros to ease up priting WEP keys */ |
5340 | #define WEP_FMT_64 "%02X%02X%02X%02X-%02X" |
5341 | #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X" |
5342 | #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4] |
5343 | #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10] |
5344 | |
5345 | /** |
5346 | * ipw2100_set_key() - Set a the wep key |
5347 | * |
5348 | * @priv: struct to work on |
5349 | * @idx: index of the key we want to set |
5350 | * @key: ptr to the key data to set |
5351 | * @len: length of the buffer at @key |
5352 | * @batch_mode: FIXME perform the operation in batch mode, not |
5353 | * disabling the device. |
5354 | * |
5355 | * @returns 0 if OK, < 0 errno code on error. |
5356 | * |
5357 | * Fill out a command structure with the new wep key, length an |
5358 | * index and send it down the wire. |
5359 | */ |
5360 | static int ipw2100_set_key(struct ipw2100_priv *priv, |
5361 | int idx, char *key, int len, int batch_mode) |
5362 | { |
5363 | int keylen = len ? (len <= 5 ? 5 : 13) : 0; |
5364 | struct host_command cmd = { |
5365 | .host_command = WEP_KEY_INFO, |
5366 | .host_command_sequence = 0, |
5367 | .host_command_length = sizeof(struct ipw2100_wep_key), |
5368 | }; |
5369 | struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters; |
5370 | int err; |
5371 | |
5372 | IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n" , |
5373 | idx, keylen, len); |
5374 | |
5375 | /* NOTE: We don't check cached values in case the firmware was reset |
5376 | * or some other problem is occurring. If the user is setting the key, |
5377 | * then we push the change */ |
5378 | |
5379 | wep_key->idx = idx; |
5380 | wep_key->len = keylen; |
5381 | |
5382 | if (keylen) { |
5383 | memcpy(wep_key->key, key, len); |
5384 | memset(wep_key->key + len, 0, keylen - len); |
5385 | } |
5386 | |
5387 | /* Will be optimized out on debug not being configured in */ |
5388 | if (keylen == 0) |
5389 | IPW_DEBUG_WEP("%s: Clearing key %d\n" , |
5390 | priv->net_dev->name, wep_key->idx); |
5391 | else if (keylen == 5) |
5392 | IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n" , |
5393 | priv->net_dev->name, wep_key->idx, wep_key->len, |
5394 | WEP_STR_64(wep_key->key)); |
5395 | else |
5396 | IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128 |
5397 | "\n" , |
5398 | priv->net_dev->name, wep_key->idx, wep_key->len, |
5399 | WEP_STR_128(wep_key->key)); |
5400 | |
5401 | if (!batch_mode) { |
5402 | err = ipw2100_disable_adapter(priv); |
5403 | /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */ |
5404 | if (err) { |
5405 | printk(KERN_ERR DRV_NAME |
5406 | ": %s: Could not disable adapter %d\n" , |
5407 | priv->net_dev->name, err); |
5408 | return err; |
5409 | } |
5410 | } |
5411 | |
5412 | /* send cmd to firmware */ |
5413 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5414 | |
5415 | if (!batch_mode) { |
5416 | int err2 = ipw2100_enable_adapter(priv); |
5417 | if (err == 0) |
5418 | err = err2; |
5419 | } |
5420 | return err; |
5421 | } |
5422 | |
5423 | static int ipw2100_set_key_index(struct ipw2100_priv *priv, |
5424 | int idx, int batch_mode) |
5425 | { |
5426 | struct host_command cmd = { |
5427 | .host_command = WEP_KEY_INDEX, |
5428 | .host_command_sequence = 0, |
5429 | .host_command_length = 4, |
5430 | .host_command_parameters = {idx}, |
5431 | }; |
5432 | int err; |
5433 | |
5434 | IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n" , idx); |
5435 | |
5436 | if (idx < 0 || idx > 3) |
5437 | return -EINVAL; |
5438 | |
5439 | if (!batch_mode) { |
5440 | err = ipw2100_disable_adapter(priv); |
5441 | if (err) { |
5442 | printk(KERN_ERR DRV_NAME |
5443 | ": %s: Could not disable adapter %d\n" , |
5444 | priv->net_dev->name, err); |
5445 | return err; |
5446 | } |
5447 | } |
5448 | |
5449 | /* send cmd to firmware */ |
5450 | err = ipw2100_hw_send_command(priv, cmd: &cmd); |
5451 | |
5452 | if (!batch_mode) |
5453 | ipw2100_enable_adapter(priv); |
5454 | |
5455 | return err; |
5456 | } |
5457 | |
5458 | static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode) |
5459 | { |
5460 | int i, err, auth_mode, sec_level, use_group; |
5461 | |
5462 | if (!(priv->status & STATUS_RUNNING)) |
5463 | return 0; |
5464 | |
5465 | if (!batch_mode) { |
5466 | err = ipw2100_disable_adapter(priv); |
5467 | if (err) |
5468 | return err; |
5469 | } |
5470 | |
5471 | if (!priv->ieee->sec.enabled) { |
5472 | err = |
5473 | ipw2100_set_security_information(priv, IPW_AUTH_OPEN, |
5474 | SEC_LEVEL_0, unicast_using_group: 0, batch_mode: 1); |
5475 | } else { |
5476 | auth_mode = IPW_AUTH_OPEN; |
5477 | if (priv->ieee->sec.flags & SEC_AUTH_MODE) { |
5478 | if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY) |
5479 | auth_mode = IPW_AUTH_SHARED; |
5480 | else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP) |
5481 | auth_mode = IPW_AUTH_LEAP_CISCO_ID; |
5482 | } |
5483 | |
5484 | sec_level = SEC_LEVEL_0; |
5485 | if (priv->ieee->sec.flags & SEC_LEVEL) |
5486 | sec_level = priv->ieee->sec.level; |
5487 | |
5488 | use_group = 0; |
5489 | if (priv->ieee->sec.flags & SEC_UNICAST_GROUP) |
5490 | use_group = priv->ieee->sec.unicast_uses_group; |
5491 | |
5492 | err = |
5493 | ipw2100_set_security_information(priv, auth_mode, security_level: sec_level, |
5494 | unicast_using_group: use_group, batch_mode: 1); |
5495 | } |
5496 | |
5497 | if (err) |
5498 | goto exit; |
5499 | |
5500 | if (priv->ieee->sec.enabled) { |
5501 | for (i = 0; i < 4; i++) { |
5502 | if (!(priv->ieee->sec.flags & (1 << i))) { |
5503 | memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN); |
5504 | priv->ieee->sec.key_sizes[i] = 0; |
5505 | } else { |
5506 | err = ipw2100_set_key(priv, idx: i, |
5507 | key: priv->ieee->sec.keys[i], |
5508 | len: priv->ieee->sec. |
5509 | key_sizes[i], batch_mode: 1); |
5510 | if (err) |
5511 | goto exit; |
5512 | } |
5513 | } |
5514 | |
5515 | ipw2100_set_key_index(priv, idx: priv->ieee->crypt_info.tx_keyidx, batch_mode: 1); |
5516 | } |
5517 | |
5518 | /* Always enable privacy so the Host can filter WEP packets if |
5519 | * encrypted data is sent up */ |
5520 | err = |
5521 | ipw2100_set_wep_flags(priv, |
5522 | flags: priv->ieee->sec. |
5523 | enabled ? IPW_PRIVACY_CAPABLE : 0, batch_mode: 1); |
5524 | if (err) |
5525 | goto exit; |
5526 | |
5527 | priv->status &= ~STATUS_SECURITY_UPDATED; |
5528 | |
5529 | exit: |
5530 | if (!batch_mode) |
5531 | ipw2100_enable_adapter(priv); |
5532 | |
5533 | return err; |
5534 | } |
5535 | |
5536 | static void ipw2100_security_work(struct work_struct *work) |
5537 | { |
5538 | struct ipw2100_priv *priv = |
5539 | container_of(work, struct ipw2100_priv, security_work.work); |
5540 | |
5541 | /* If we happen to have reconnected before we get a chance to |
5542 | * process this, then update the security settings--which causes |
5543 | * a disassociation to occur */ |
5544 | if (!(priv->status & STATUS_ASSOCIATED) && |
5545 | priv->status & STATUS_SECURITY_UPDATED) |
5546 | ipw2100_configure_security(priv, batch_mode: 0); |
5547 | } |
5548 | |
5549 | static void shim__set_security(struct net_device *dev, |
5550 | struct libipw_security *sec) |
5551 | { |
5552 | struct ipw2100_priv *priv = libipw_priv(dev); |
5553 | int i; |
5554 | |
5555 | mutex_lock(&priv->action_mutex); |
5556 | if (!(priv->status & STATUS_INITIALIZED)) |
5557 | goto done; |
5558 | |
5559 | for (i = 0; i < 4; i++) { |
5560 | if (sec->flags & (1 << i)) { |
5561 | priv->ieee->sec.key_sizes[i] = sec->key_sizes[i]; |
5562 | if (sec->key_sizes[i] == 0) |
5563 | priv->ieee->sec.flags &= ~(1 << i); |
5564 | else |
5565 | memcpy(priv->ieee->sec.keys[i], sec->keys[i], |
5566 | sec->key_sizes[i]); |
5567 | if (sec->level == SEC_LEVEL_1) { |
5568 | priv->ieee->sec.flags |= (1 << i); |
5569 | priv->status |= STATUS_SECURITY_UPDATED; |
5570 | } else |
5571 | priv->ieee->sec.flags &= ~(1 << i); |
5572 | } |
5573 | } |
5574 | |
5575 | if ((sec->flags & SEC_ACTIVE_KEY) && |
5576 | priv->ieee->sec.active_key != sec->active_key) { |
5577 | priv->ieee->sec.active_key = sec->active_key; |
5578 | priv->ieee->sec.flags |= SEC_ACTIVE_KEY; |
5579 | priv->status |= STATUS_SECURITY_UPDATED; |
5580 | } |
5581 | |
5582 | if ((sec->flags & SEC_AUTH_MODE) && |
5583 | (priv->ieee->sec.auth_mode != sec->auth_mode)) { |
5584 | priv->ieee->sec.auth_mode = sec->auth_mode; |
5585 | priv->ieee->sec.flags |= SEC_AUTH_MODE; |
5586 | priv->status |= STATUS_SECURITY_UPDATED; |
5587 | } |
5588 | |
5589 | if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) { |
5590 | priv->ieee->sec.flags |= SEC_ENABLED; |
5591 | priv->ieee->sec.enabled = sec->enabled; |
5592 | priv->status |= STATUS_SECURITY_UPDATED; |
5593 | } |
5594 | |
5595 | if (sec->flags & SEC_ENCRYPT) |
5596 | priv->ieee->sec.encrypt = sec->encrypt; |
5597 | |
5598 | if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) { |
5599 | priv->ieee->sec.level = sec->level; |
5600 | priv->ieee->sec.flags |= SEC_LEVEL; |
5601 | priv->status |= STATUS_SECURITY_UPDATED; |
5602 | } |
5603 | |
5604 | IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n" , |
5605 | priv->ieee->sec.flags & (1 << 8) ? '1' : '0', |
5606 | priv->ieee->sec.flags & (1 << 7) ? '1' : '0', |
5607 | priv->ieee->sec.flags & (1 << 6) ? '1' : '0', |
5608 | priv->ieee->sec.flags & (1 << 5) ? '1' : '0', |
5609 | priv->ieee->sec.flags & (1 << 4) ? '1' : '0', |
5610 | priv->ieee->sec.flags & (1 << 3) ? '1' : '0', |
5611 | priv->ieee->sec.flags & (1 << 2) ? '1' : '0', |
5612 | priv->ieee->sec.flags & (1 << 1) ? '1' : '0', |
5613 | priv->ieee->sec.flags & (1 << 0) ? '1' : '0'); |
5614 | |
5615 | /* As a temporary work around to enable WPA until we figure out why |
5616 | * wpa_supplicant toggles the security capability of the driver, which |
5617 | * forces a disassociation with force_update... |
5618 | * |
5619 | * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ |
5620 | if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) |
5621 | ipw2100_configure_security(priv, batch_mode: 0); |
5622 | done: |
5623 | mutex_unlock(lock: &priv->action_mutex); |
5624 | } |
5625 | |
5626 | static int ipw2100_adapter_setup(struct ipw2100_priv *priv) |
5627 | { |
5628 | int err; |
5629 | int batch_mode = 1; |
5630 | u8 *bssid; |
5631 | |
5632 | IPW_DEBUG_INFO("enter\n" ); |
5633 | |
5634 | err = ipw2100_disable_adapter(priv); |
5635 | if (err) |
5636 | return err; |
5637 | #ifdef CONFIG_IPW2100_MONITOR |
5638 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
5639 | err = ipw2100_set_channel(priv, channel: priv->channel, batch_mode); |
5640 | if (err) |
5641 | return err; |
5642 | |
5643 | IPW_DEBUG_INFO("exit\n" ); |
5644 | |
5645 | return 0; |
5646 | } |
5647 | #endif /* CONFIG_IPW2100_MONITOR */ |
5648 | |
5649 | err = ipw2100_read_mac_address(priv); |
5650 | if (err) |
5651 | return -EIO; |
5652 | |
5653 | err = ipw2100_set_mac_address(priv, batch_mode); |
5654 | if (err) |
5655 | return err; |
5656 | |
5657 | err = ipw2100_set_port_type(priv, port_type: priv->ieee->iw_mode, batch_mode); |
5658 | if (err) |
5659 | return err; |
5660 | |
5661 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
5662 | err = ipw2100_set_channel(priv, channel: priv->channel, batch_mode); |
5663 | if (err) |
5664 | return err; |
5665 | } |
5666 | |
5667 | err = ipw2100_system_config(priv, batch_mode); |
5668 | if (err) |
5669 | return err; |
5670 | |
5671 | err = ipw2100_set_tx_rates(priv, rate: priv->tx_rates, batch_mode); |
5672 | if (err) |
5673 | return err; |
5674 | |
5675 | /* Default to power mode OFF */ |
5676 | err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
5677 | if (err) |
5678 | return err; |
5679 | |
5680 | err = ipw2100_set_rts_threshold(priv, threshold: priv->rts_threshold); |
5681 | if (err) |
5682 | return err; |
5683 | |
5684 | if (priv->config & CFG_STATIC_BSSID) |
5685 | bssid = priv->bssid; |
5686 | else |
5687 | bssid = NULL; |
5688 | err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode); |
5689 | if (err) |
5690 | return err; |
5691 | |
5692 | if (priv->config & CFG_STATIC_ESSID) |
5693 | err = ipw2100_set_essid(priv, essid: priv->essid, length: priv->essid_len, |
5694 | batch_mode); |
5695 | else |
5696 | err = ipw2100_set_essid(priv, NULL, length: 0, batch_mode); |
5697 | if (err) |
5698 | return err; |
5699 | |
5700 | err = ipw2100_configure_security(priv, batch_mode); |
5701 | if (err) |
5702 | return err; |
5703 | |
5704 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
5705 | err = |
5706 | ipw2100_set_ibss_beacon_interval(priv, |
5707 | interval: priv->beacon_interval, |
5708 | batch_mode); |
5709 | if (err) |
5710 | return err; |
5711 | |
5712 | err = ipw2100_set_tx_power(priv, tx_power: priv->tx_power); |
5713 | if (err) |
5714 | return err; |
5715 | } |
5716 | |
5717 | /* |
5718 | err = ipw2100_set_fragmentation_threshold( |
5719 | priv, priv->frag_threshold, batch_mode); |
5720 | if (err) |
5721 | return err; |
5722 | */ |
5723 | |
5724 | IPW_DEBUG_INFO("exit\n" ); |
5725 | |
5726 | return 0; |
5727 | } |
5728 | |
5729 | /************************************************************************* |
5730 | * |
5731 | * EXTERNALLY CALLED METHODS |
5732 | * |
5733 | *************************************************************************/ |
5734 | |
5735 | /* This method is called by the network layer -- not to be confused with |
5736 | * ipw2100_set_mac_address() declared above called by this driver (and this |
5737 | * method as well) to talk to the firmware */ |
5738 | static int ipw2100_set_address(struct net_device *dev, void *p) |
5739 | { |
5740 | struct ipw2100_priv *priv = libipw_priv(dev); |
5741 | struct sockaddr *addr = p; |
5742 | int err = 0; |
5743 | |
5744 | if (!is_valid_ether_addr(addr: addr->sa_data)) |
5745 | return -EADDRNOTAVAIL; |
5746 | |
5747 | mutex_lock(&priv->action_mutex); |
5748 | |
5749 | priv->config |= CFG_CUSTOM_MAC; |
5750 | memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN); |
5751 | |
5752 | err = ipw2100_set_mac_address(priv, batch_mode: 0); |
5753 | if (err) |
5754 | goto done; |
5755 | |
5756 | priv->reset_backoff = 0; |
5757 | mutex_unlock(lock: &priv->action_mutex); |
5758 | ipw2100_reset_adapter(work: &priv->reset_work.work); |
5759 | return 0; |
5760 | |
5761 | done: |
5762 | mutex_unlock(lock: &priv->action_mutex); |
5763 | return err; |
5764 | } |
5765 | |
5766 | static int ipw2100_open(struct net_device *dev) |
5767 | { |
5768 | struct ipw2100_priv *priv = libipw_priv(dev); |
5769 | unsigned long flags; |
5770 | IPW_DEBUG_INFO("dev->open\n" ); |
5771 | |
5772 | spin_lock_irqsave(&priv->low_lock, flags); |
5773 | if (priv->status & STATUS_ASSOCIATED) { |
5774 | netif_carrier_on(dev); |
5775 | netif_start_queue(dev); |
5776 | } |
5777 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
5778 | |
5779 | return 0; |
5780 | } |
5781 | |
5782 | static int ipw2100_close(struct net_device *dev) |
5783 | { |
5784 | struct ipw2100_priv *priv = libipw_priv(dev); |
5785 | unsigned long flags; |
5786 | struct list_head *element; |
5787 | struct ipw2100_tx_packet *packet; |
5788 | |
5789 | IPW_DEBUG_INFO("enter\n" ); |
5790 | |
5791 | spin_lock_irqsave(&priv->low_lock, flags); |
5792 | |
5793 | if (priv->status & STATUS_ASSOCIATED) |
5794 | netif_carrier_off(dev); |
5795 | netif_stop_queue(dev); |
5796 | |
5797 | /* Flush the TX queue ... */ |
5798 | while (!list_empty(head: &priv->tx_pend_list)) { |
5799 | element = priv->tx_pend_list.next; |
5800 | packet = list_entry(element, struct ipw2100_tx_packet, list); |
5801 | |
5802 | list_del(entry: element); |
5803 | DEC_STAT(&priv->tx_pend_stat); |
5804 | |
5805 | libipw_txb_free(packet->info.d_struct.txb); |
5806 | packet->info.d_struct.txb = NULL; |
5807 | |
5808 | list_add_tail(new: element, head: &priv->tx_free_list); |
5809 | INC_STAT(&priv->tx_free_stat); |
5810 | } |
5811 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
5812 | |
5813 | IPW_DEBUG_INFO("exit\n" ); |
5814 | |
5815 | return 0; |
5816 | } |
5817 | |
5818 | /* |
5819 | * TODO: Fix this function... its just wrong |
5820 | */ |
5821 | static void ipw2100_tx_timeout(struct net_device *dev, unsigned int txqueue) |
5822 | { |
5823 | struct ipw2100_priv *priv = libipw_priv(dev); |
5824 | |
5825 | dev->stats.tx_errors++; |
5826 | |
5827 | #ifdef CONFIG_IPW2100_MONITOR |
5828 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
5829 | return; |
5830 | #endif |
5831 | |
5832 | IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n" , |
5833 | dev->name); |
5834 | schedule_reset(priv); |
5835 | } |
5836 | |
5837 | static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value) |
5838 | { |
5839 | /* This is called when wpa_supplicant loads and closes the driver |
5840 | * interface. */ |
5841 | priv->ieee->wpa_enabled = value; |
5842 | return 0; |
5843 | } |
5844 | |
5845 | static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value) |
5846 | { |
5847 | |
5848 | struct libipw_device *ieee = priv->ieee; |
5849 | struct libipw_security sec = { |
5850 | .flags = SEC_AUTH_MODE, |
5851 | }; |
5852 | int ret = 0; |
5853 | |
5854 | if (value & IW_AUTH_ALG_SHARED_KEY) { |
5855 | sec.auth_mode = WLAN_AUTH_SHARED_KEY; |
5856 | ieee->open_wep = 0; |
5857 | } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) { |
5858 | sec.auth_mode = WLAN_AUTH_OPEN; |
5859 | ieee->open_wep = 1; |
5860 | } else if (value & IW_AUTH_ALG_LEAP) { |
5861 | sec.auth_mode = WLAN_AUTH_LEAP; |
5862 | ieee->open_wep = 1; |
5863 | } else |
5864 | return -EINVAL; |
5865 | |
5866 | if (ieee->set_security) |
5867 | ieee->set_security(ieee->dev, &sec); |
5868 | else |
5869 | ret = -EOPNOTSUPP; |
5870 | |
5871 | return ret; |
5872 | } |
5873 | |
5874 | static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv, |
5875 | char *wpa_ie, int wpa_ie_len) |
5876 | { |
5877 | |
5878 | struct ipw2100_wpa_assoc_frame frame; |
5879 | |
5880 | frame.fixed_ie_mask = 0; |
5881 | |
5882 | /* copy WPA IE */ |
5883 | memcpy(frame.var_ie, wpa_ie, wpa_ie_len); |
5884 | frame.var_ie_len = wpa_ie_len; |
5885 | |
5886 | /* make sure WPA is enabled */ |
5887 | ipw2100_wpa_enable(priv, value: 1); |
5888 | ipw2100_set_wpa_ie(priv, wpa_frame: &frame, batch_mode: 0); |
5889 | } |
5890 | |
5891 | static void ipw_ethtool_get_drvinfo(struct net_device *dev, |
5892 | struct ethtool_drvinfo *info) |
5893 | { |
5894 | struct ipw2100_priv *priv = libipw_priv(dev); |
5895 | char fw_ver[64]; |
5896 | |
5897 | strscpy(p: info->driver, DRV_NAME, size: sizeof(info->driver)); |
5898 | strscpy(p: info->version, DRV_VERSION, size: sizeof(info->version)); |
5899 | |
5900 | ipw2100_get_fwversion(priv, buf: fw_ver, max: sizeof(fw_ver)); |
5901 | |
5902 | strscpy(p: info->fw_version, q: fw_ver, size: sizeof(info->fw_version)); |
5903 | strscpy(p: info->bus_info, q: pci_name(pdev: priv->pci_dev), |
5904 | size: sizeof(info->bus_info)); |
5905 | } |
5906 | |
5907 | static u32 ipw2100_ethtool_get_link(struct net_device *dev) |
5908 | { |
5909 | struct ipw2100_priv *priv = libipw_priv(dev); |
5910 | return (priv->status & STATUS_ASSOCIATED) ? 1 : 0; |
5911 | } |
5912 | |
5913 | static const struct ethtool_ops ipw2100_ethtool_ops = { |
5914 | .get_link = ipw2100_ethtool_get_link, |
5915 | .get_drvinfo = ipw_ethtool_get_drvinfo, |
5916 | }; |
5917 | |
5918 | static void ipw2100_hang_check(struct work_struct *work) |
5919 | { |
5920 | struct ipw2100_priv *priv = |
5921 | container_of(work, struct ipw2100_priv, hang_check.work); |
5922 | unsigned long flags; |
5923 | u32 rtc = 0xa5a5a5a5; |
5924 | u32 len = sizeof(rtc); |
5925 | int restart = 0; |
5926 | |
5927 | spin_lock_irqsave(&priv->low_lock, flags); |
5928 | |
5929 | if (priv->fatal_error != 0) { |
5930 | /* If fatal_error is set then we need to restart */ |
5931 | IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n" , |
5932 | priv->net_dev->name); |
5933 | |
5934 | restart = 1; |
5935 | } else if (ipw2100_get_ordinal(priv, ord: IPW_ORD_RTC_TIME, val: &rtc, len: &len) || |
5936 | (rtc == priv->last_rtc)) { |
5937 | /* Check if firmware is hung */ |
5938 | IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n" , |
5939 | priv->net_dev->name); |
5940 | |
5941 | restart = 1; |
5942 | } |
5943 | |
5944 | if (restart) { |
5945 | /* Kill timer */ |
5946 | priv->stop_hang_check = 1; |
5947 | priv->hangs++; |
5948 | |
5949 | /* Restart the NIC */ |
5950 | schedule_reset(priv); |
5951 | } |
5952 | |
5953 | priv->last_rtc = rtc; |
5954 | |
5955 | if (!priv->stop_hang_check) |
5956 | schedule_delayed_work(dwork: &priv->hang_check, HZ / 2); |
5957 | |
5958 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
5959 | } |
5960 | |
5961 | static void ipw2100_rf_kill(struct work_struct *work) |
5962 | { |
5963 | struct ipw2100_priv *priv = |
5964 | container_of(work, struct ipw2100_priv, rf_kill.work); |
5965 | unsigned long flags; |
5966 | |
5967 | spin_lock_irqsave(&priv->low_lock, flags); |
5968 | |
5969 | if (rf_kill_active(priv)) { |
5970 | IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n" ); |
5971 | if (!priv->stop_rf_kill) |
5972 | schedule_delayed_work(dwork: &priv->rf_kill, |
5973 | delay: round_jiffies_relative(HZ)); |
5974 | goto exit_unlock; |
5975 | } |
5976 | |
5977 | /* RF Kill is now disabled, so bring the device back up */ |
5978 | |
5979 | if (!(priv->status & STATUS_RF_KILL_MASK)) { |
5980 | IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting " |
5981 | "device\n" ); |
5982 | schedule_reset(priv); |
5983 | } else |
5984 | IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still " |
5985 | "enabled\n" ); |
5986 | |
5987 | exit_unlock: |
5988 | spin_unlock_irqrestore(lock: &priv->low_lock, flags); |
5989 | } |
5990 | |
5991 | static void ipw2100_irq_tasklet(struct tasklet_struct *t); |
5992 | |
5993 | static const struct net_device_ops ipw2100_netdev_ops = { |
5994 | .ndo_open = ipw2100_open, |
5995 | .ndo_stop = ipw2100_close, |
5996 | .ndo_start_xmit = libipw_xmit, |
5997 | .ndo_tx_timeout = ipw2100_tx_timeout, |
5998 | .ndo_set_mac_address = ipw2100_set_address, |
5999 | .ndo_validate_addr = eth_validate_addr, |
6000 | }; |
6001 | |
6002 | /* Look into using netdev destructor to shutdown libipw? */ |
6003 | |
6004 | static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, |
6005 | void __iomem * ioaddr) |
6006 | { |
6007 | struct ipw2100_priv *priv; |
6008 | struct net_device *dev; |
6009 | |
6010 | dev = alloc_libipw(sizeof_priv: sizeof(struct ipw2100_priv), monitor: 0); |
6011 | if (!dev) |
6012 | return NULL; |
6013 | priv = libipw_priv(dev); |
6014 | priv->ieee = netdev_priv(dev); |
6015 | priv->pci_dev = pci_dev; |
6016 | priv->net_dev = dev; |
6017 | priv->ioaddr = ioaddr; |
6018 | |
6019 | priv->ieee->hard_start_xmit = ipw2100_tx; |
6020 | priv->ieee->set_security = shim__set_security; |
6021 | |
6022 | priv->ieee->perfect_rssi = -20; |
6023 | priv->ieee->worst_rssi = -85; |
6024 | |
6025 | dev->netdev_ops = &ipw2100_netdev_ops; |
6026 | dev->ethtool_ops = &ipw2100_ethtool_ops; |
6027 | dev->wireless_handlers = &ipw2100_wx_handler_def; |
6028 | priv->wireless_data.libipw = priv->ieee; |
6029 | dev->wireless_data = &priv->wireless_data; |
6030 | dev->watchdog_timeo = 3 * HZ; |
6031 | dev->irq = 0; |
6032 | dev->min_mtu = 68; |
6033 | dev->max_mtu = LIBIPW_DATA_LEN; |
6034 | |
6035 | /* NOTE: We don't use the wireless_handlers hook |
6036 | * in dev as the system will start throwing WX requests |
6037 | * to us before we're actually initialized and it just |
6038 | * ends up causing problems. So, we just handle |
6039 | * the WX extensions through the ipw2100_ioctl interface */ |
6040 | |
6041 | /* memset() puts everything to 0, so we only have explicitly set |
6042 | * those values that need to be something else */ |
6043 | |
6044 | /* If power management is turned on, default to AUTO mode */ |
6045 | priv->power_mode = IPW_POWER_AUTO; |
6046 | |
6047 | #ifdef CONFIG_IPW2100_MONITOR |
6048 | priv->config |= CFG_CRC_CHECK; |
6049 | #endif |
6050 | priv->ieee->wpa_enabled = 0; |
6051 | priv->ieee->drop_unencrypted = 0; |
6052 | priv->ieee->privacy_invoked = 0; |
6053 | priv->ieee->ieee802_1x = 1; |
6054 | |
6055 | /* Set module parameters */ |
6056 | switch (network_mode) { |
6057 | case 1: |
6058 | priv->ieee->iw_mode = IW_MODE_ADHOC; |
6059 | break; |
6060 | #ifdef CONFIG_IPW2100_MONITOR |
6061 | case 2: |
6062 | priv->ieee->iw_mode = IW_MODE_MONITOR; |
6063 | break; |
6064 | #endif |
6065 | default: |
6066 | case 0: |
6067 | priv->ieee->iw_mode = IW_MODE_INFRA; |
6068 | break; |
6069 | } |
6070 | |
6071 | if (disable == 1) |
6072 | priv->status |= STATUS_RF_KILL_SW; |
6073 | |
6074 | if (channel != 0 && |
6075 | ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) { |
6076 | priv->config |= CFG_STATIC_CHANNEL; |
6077 | priv->channel = channel; |
6078 | } |
6079 | |
6080 | if (associate) |
6081 | priv->config |= CFG_ASSOCIATE; |
6082 | |
6083 | priv->beacon_interval = DEFAULT_BEACON_INTERVAL; |
6084 | priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT; |
6085 | priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT; |
6086 | priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED; |
6087 | priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED; |
6088 | priv->tx_power = IPW_TX_POWER_DEFAULT; |
6089 | priv->tx_rates = DEFAULT_TX_RATES; |
6090 | |
6091 | strcpy(p: priv->nick, q: "ipw2100" ); |
6092 | |
6093 | spin_lock_init(&priv->low_lock); |
6094 | mutex_init(&priv->action_mutex); |
6095 | mutex_init(&priv->adapter_mutex); |
6096 | |
6097 | init_waitqueue_head(&priv->wait_command_queue); |
6098 | |
6099 | netif_carrier_off(dev); |
6100 | |
6101 | INIT_LIST_HEAD(list: &priv->msg_free_list); |
6102 | INIT_LIST_HEAD(list: &priv->msg_pend_list); |
6103 | INIT_STAT(&priv->msg_free_stat); |
6104 | INIT_STAT(&priv->msg_pend_stat); |
6105 | |
6106 | INIT_LIST_HEAD(list: &priv->tx_free_list); |
6107 | INIT_LIST_HEAD(list: &priv->tx_pend_list); |
6108 | INIT_STAT(&priv->tx_free_stat); |
6109 | INIT_STAT(&priv->tx_pend_stat); |
6110 | |
6111 | INIT_LIST_HEAD(list: &priv->fw_pend_list); |
6112 | INIT_STAT(&priv->fw_pend_stat); |
6113 | |
6114 | INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter); |
6115 | INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work); |
6116 | INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work); |
6117 | INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check); |
6118 | INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); |
6119 | INIT_DELAYED_WORK(&priv->scan_event, ipw2100_scan_event); |
6120 | |
6121 | tasklet_setup(t: &priv->irq_tasklet, callback: ipw2100_irq_tasklet); |
6122 | |
6123 | /* NOTE: We do not start the deferred work for status checks yet */ |
6124 | priv->stop_rf_kill = 1; |
6125 | priv->stop_hang_check = 1; |
6126 | |
6127 | return dev; |
6128 | } |
6129 | |
6130 | static int ipw2100_pci_init_one(struct pci_dev *pci_dev, |
6131 | const struct pci_device_id *ent) |
6132 | { |
6133 | void __iomem *ioaddr; |
6134 | struct net_device *dev = NULL; |
6135 | struct ipw2100_priv *priv = NULL; |
6136 | int err = 0; |
6137 | int registered = 0; |
6138 | u32 val; |
6139 | |
6140 | IPW_DEBUG_INFO("enter\n" ); |
6141 | |
6142 | if (!(pci_resource_flags(pci_dev, 0) & IORESOURCE_MEM)) { |
6143 | IPW_DEBUG_INFO("weird - resource type is not memory\n" ); |
6144 | err = -ENODEV; |
6145 | goto out; |
6146 | } |
6147 | |
6148 | ioaddr = pci_iomap(dev: pci_dev, bar: 0, max: 0); |
6149 | if (!ioaddr) { |
6150 | printk(KERN_WARNING DRV_NAME |
6151 | "Error calling ioremap.\n" ); |
6152 | err = -EIO; |
6153 | goto fail; |
6154 | } |
6155 | |
6156 | /* allocate and initialize our net_device */ |
6157 | dev = ipw2100_alloc_device(pci_dev, ioaddr); |
6158 | if (!dev) { |
6159 | printk(KERN_WARNING DRV_NAME |
6160 | "Error calling ipw2100_alloc_device.\n" ); |
6161 | err = -ENOMEM; |
6162 | goto fail; |
6163 | } |
6164 | |
6165 | /* set up PCI mappings for device */ |
6166 | err = pci_enable_device(dev: pci_dev); |
6167 | if (err) { |
6168 | printk(KERN_WARNING DRV_NAME |
6169 | "Error calling pci_enable_device.\n" ); |
6170 | return err; |
6171 | } |
6172 | |
6173 | priv = libipw_priv(dev); |
6174 | |
6175 | pci_set_master(dev: pci_dev); |
6176 | pci_set_drvdata(pdev: pci_dev, data: priv); |
6177 | |
6178 | err = dma_set_mask(dev: &pci_dev->dev, DMA_BIT_MASK(32)); |
6179 | if (err) { |
6180 | printk(KERN_WARNING DRV_NAME |
6181 | "Error calling pci_set_dma_mask.\n" ); |
6182 | pci_disable_device(dev: pci_dev); |
6183 | return err; |
6184 | } |
6185 | |
6186 | err = pci_request_regions(pci_dev, DRV_NAME); |
6187 | if (err) { |
6188 | printk(KERN_WARNING DRV_NAME |
6189 | "Error calling pci_request_regions.\n" ); |
6190 | pci_disable_device(dev: pci_dev); |
6191 | return err; |
6192 | } |
6193 | |
6194 | /* We disable the RETRY_TIMEOUT register (0x41) to keep |
6195 | * PCI Tx retries from interfering with C3 CPU state */ |
6196 | pci_read_config_dword(dev: pci_dev, where: 0x40, val: &val); |
6197 | if ((val & 0x0000ff00) != 0) |
6198 | pci_write_config_dword(dev: pci_dev, where: 0x40, val: val & 0xffff00ff); |
6199 | |
6200 | if (!ipw2100_hw_is_adapter_in_system(dev)) { |
6201 | printk(KERN_WARNING DRV_NAME |
6202 | "Device not found via register read.\n" ); |
6203 | err = -ENODEV; |
6204 | goto fail; |
6205 | } |
6206 | |
6207 | SET_NETDEV_DEV(dev, &pci_dev->dev); |
6208 | |
6209 | /* Force interrupts to be shut off on the device */ |
6210 | priv->status |= STATUS_INT_ENABLED; |
6211 | ipw2100_disable_interrupts(priv); |
6212 | |
6213 | /* Allocate and initialize the Tx/Rx queues and lists */ |
6214 | if (ipw2100_queues_allocate(priv)) { |
6215 | printk(KERN_WARNING DRV_NAME |
6216 | "Error calling ipw2100_queues_allocate.\n" ); |
6217 | err = -ENOMEM; |
6218 | goto fail; |
6219 | } |
6220 | ipw2100_queues_initialize(priv); |
6221 | |
6222 | err = request_irq(irq: pci_dev->irq, |
6223 | handler: ipw2100_interrupt, IRQF_SHARED, name: dev->name, dev: priv); |
6224 | if (err) { |
6225 | printk(KERN_WARNING DRV_NAME |
6226 | "Error calling request_irq: %d.\n" , pci_dev->irq); |
6227 | goto fail; |
6228 | } |
6229 | dev->irq = pci_dev->irq; |
6230 | |
6231 | IPW_DEBUG_INFO("Attempting to register device...\n" ); |
6232 | |
6233 | printk(KERN_INFO DRV_NAME |
6234 | ": Detected Intel PRO/Wireless 2100 Network Connection\n" ); |
6235 | |
6236 | err = ipw2100_up(priv, deferred: 1); |
6237 | if (err) |
6238 | goto fail; |
6239 | |
6240 | err = ipw2100_wdev_init(dev); |
6241 | if (err) |
6242 | goto fail; |
6243 | registered = 1; |
6244 | |
6245 | /* Bring up the interface. Pre 0.46, after we registered the |
6246 | * network device we would call ipw2100_up. This introduced a race |
6247 | * condition with newer hotplug configurations (network was coming |
6248 | * up and making calls before the device was initialized). |
6249 | */ |
6250 | err = register_netdev(dev); |
6251 | if (err) { |
6252 | printk(KERN_WARNING DRV_NAME |
6253 | "Error calling register_netdev.\n" ); |
6254 | goto fail; |
6255 | } |
6256 | registered = 2; |
6257 | |
6258 | mutex_lock(&priv->action_mutex); |
6259 | |
6260 | IPW_DEBUG_INFO("%s: Bound to %s\n" , dev->name, pci_name(pci_dev)); |
6261 | |
6262 | /* perform this after register_netdev so that dev->name is set */ |
6263 | err = sysfs_create_group(kobj: &pci_dev->dev.kobj, grp: &ipw2100_attribute_group); |
6264 | if (err) |
6265 | goto fail_unlock; |
6266 | |
6267 | /* If the RF Kill switch is disabled, go ahead and complete the |
6268 | * startup sequence */ |
6269 | if (!(priv->status & STATUS_RF_KILL_MASK)) { |
6270 | /* Enable the adapter - sends HOST_COMPLETE */ |
6271 | if (ipw2100_enable_adapter(priv)) { |
6272 | printk(KERN_WARNING DRV_NAME |
6273 | ": %s: failed in call to enable adapter.\n" , |
6274 | priv->net_dev->name); |
6275 | ipw2100_hw_stop_adapter(priv); |
6276 | err = -EIO; |
6277 | goto fail_unlock; |
6278 | } |
6279 | |
6280 | /* Start a scan . . . */ |
6281 | ipw2100_set_scan_options(priv); |
6282 | ipw2100_start_scan(priv); |
6283 | } |
6284 | |
6285 | IPW_DEBUG_INFO("exit\n" ); |
6286 | |
6287 | priv->status |= STATUS_INITIALIZED; |
6288 | |
6289 | mutex_unlock(lock: &priv->action_mutex); |
6290 | out: |
6291 | return err; |
6292 | |
6293 | fail_unlock: |
6294 | mutex_unlock(lock: &priv->action_mutex); |
6295 | fail: |
6296 | if (dev) { |
6297 | if (registered >= 2) |
6298 | unregister_netdev(dev); |
6299 | |
6300 | if (registered) { |
6301 | wiphy_unregister(wiphy: priv->ieee->wdev.wiphy); |
6302 | kfree(objp: priv->ieee->bg_band.channels); |
6303 | } |
6304 | |
6305 | ipw2100_hw_stop_adapter(priv); |
6306 | |
6307 | ipw2100_disable_interrupts(priv); |
6308 | |
6309 | if (dev->irq) |
6310 | free_irq(dev->irq, priv); |
6311 | |
6312 | ipw2100_kill_works(priv); |
6313 | |
6314 | /* These are safe to call even if they weren't allocated */ |
6315 | ipw2100_queues_free(priv); |
6316 | sysfs_remove_group(kobj: &pci_dev->dev.kobj, |
6317 | grp: &ipw2100_attribute_group); |
6318 | |
6319 | free_libipw(dev, monitor: 0); |
6320 | } |
6321 | |
6322 | pci_iounmap(dev: pci_dev, ioaddr); |
6323 | |
6324 | pci_release_regions(pci_dev); |
6325 | pci_disable_device(dev: pci_dev); |
6326 | goto out; |
6327 | } |
6328 | |
6329 | static void ipw2100_pci_remove_one(struct pci_dev *pci_dev) |
6330 | { |
6331 | struct ipw2100_priv *priv = pci_get_drvdata(pdev: pci_dev); |
6332 | struct net_device *dev = priv->net_dev; |
6333 | |
6334 | mutex_lock(&priv->action_mutex); |
6335 | |
6336 | priv->status &= ~STATUS_INITIALIZED; |
6337 | |
6338 | sysfs_remove_group(kobj: &pci_dev->dev.kobj, grp: &ipw2100_attribute_group); |
6339 | |
6340 | #ifdef CONFIG_PM |
6341 | if (ipw2100_firmware.version) |
6342 | ipw2100_release_firmware(priv, fw: &ipw2100_firmware); |
6343 | #endif |
6344 | /* Take down the hardware */ |
6345 | ipw2100_down(priv); |
6346 | |
6347 | /* Release the mutex so that the network subsystem can |
6348 | * complete any needed calls into the driver... */ |
6349 | mutex_unlock(lock: &priv->action_mutex); |
6350 | |
6351 | /* Unregister the device first - this results in close() |
6352 | * being called if the device is open. If we free storage |
6353 | * first, then close() will crash. |
6354 | * FIXME: remove the comment above. */ |
6355 | unregister_netdev(dev); |
6356 | |
6357 | ipw2100_kill_works(priv); |
6358 | |
6359 | ipw2100_queues_free(priv); |
6360 | |
6361 | /* Free potential debugging firmware snapshot */ |
6362 | ipw2100_snapshot_free(priv); |
6363 | |
6364 | free_irq(dev->irq, priv); |
6365 | |
6366 | pci_iounmap(dev: pci_dev, priv->ioaddr); |
6367 | |
6368 | /* wiphy_unregister needs to be here, before free_libipw */ |
6369 | wiphy_unregister(wiphy: priv->ieee->wdev.wiphy); |
6370 | kfree(objp: priv->ieee->bg_band.channels); |
6371 | free_libipw(dev, monitor: 0); |
6372 | |
6373 | pci_release_regions(pci_dev); |
6374 | pci_disable_device(dev: pci_dev); |
6375 | |
6376 | IPW_DEBUG_INFO("exit\n" ); |
6377 | } |
6378 | |
6379 | static int __maybe_unused ipw2100_suspend(struct device *dev_d) |
6380 | { |
6381 | struct ipw2100_priv *priv = dev_get_drvdata(dev: dev_d); |
6382 | struct net_device *dev = priv->net_dev; |
6383 | |
6384 | IPW_DEBUG_INFO("%s: Going into suspend...\n" , dev->name); |
6385 | |
6386 | mutex_lock(&priv->action_mutex); |
6387 | if (priv->status & STATUS_INITIALIZED) { |
6388 | /* Take down the device; powers it off, etc. */ |
6389 | ipw2100_down(priv); |
6390 | } |
6391 | |
6392 | /* Remove the PRESENT state of the device */ |
6393 | netif_device_detach(dev); |
6394 | |
6395 | priv->suspend_at = ktime_get_boottime_seconds(); |
6396 | |
6397 | mutex_unlock(lock: &priv->action_mutex); |
6398 | |
6399 | return 0; |
6400 | } |
6401 | |
6402 | static int __maybe_unused ipw2100_resume(struct device *dev_d) |
6403 | { |
6404 | struct pci_dev *pci_dev = to_pci_dev(dev_d); |
6405 | struct ipw2100_priv *priv = pci_get_drvdata(pdev: pci_dev); |
6406 | struct net_device *dev = priv->net_dev; |
6407 | u32 val; |
6408 | |
6409 | if (IPW2100_PM_DISABLED) |
6410 | return 0; |
6411 | |
6412 | mutex_lock(&priv->action_mutex); |
6413 | |
6414 | IPW_DEBUG_INFO("%s: Coming out of suspend...\n" , dev->name); |
6415 | |
6416 | /* |
6417 | * Suspend/Resume resets the PCI configuration space, so we have to |
6418 | * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries |
6419 | * from interfering with C3 CPU state. pci_restore_state won't help |
6420 | * here since it only restores the first 64 bytes pci config header. |
6421 | */ |
6422 | pci_read_config_dword(dev: pci_dev, where: 0x40, val: &val); |
6423 | if ((val & 0x0000ff00) != 0) |
6424 | pci_write_config_dword(dev: pci_dev, where: 0x40, val: val & 0xffff00ff); |
6425 | |
6426 | /* Set the device back into the PRESENT state; this will also wake |
6427 | * the queue of needed */ |
6428 | netif_device_attach(dev); |
6429 | |
6430 | priv->suspend_time = ktime_get_boottime_seconds() - priv->suspend_at; |
6431 | |
6432 | /* Bring the device back up */ |
6433 | if (!(priv->status & STATUS_RF_KILL_SW)) |
6434 | ipw2100_up(priv, deferred: 0); |
6435 | |
6436 | mutex_unlock(lock: &priv->action_mutex); |
6437 | |
6438 | return 0; |
6439 | } |
6440 | |
6441 | static void ipw2100_shutdown(struct pci_dev *pci_dev) |
6442 | { |
6443 | struct ipw2100_priv *priv = pci_get_drvdata(pdev: pci_dev); |
6444 | |
6445 | /* Take down the device; powers it off, etc. */ |
6446 | ipw2100_down(priv); |
6447 | |
6448 | pci_disable_device(dev: pci_dev); |
6449 | } |
6450 | |
6451 | #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x } |
6452 | |
6453 | static const struct pci_device_id ipw2100_pci_id_table[] = { |
6454 | IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */ |
6455 | IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */ |
6456 | IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */ |
6457 | IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */ |
6458 | IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */ |
6459 | IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */ |
6460 | IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */ |
6461 | IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */ |
6462 | IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */ |
6463 | IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */ |
6464 | IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */ |
6465 | IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */ |
6466 | IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */ |
6467 | |
6468 | IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */ |
6469 | IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */ |
6470 | IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */ |
6471 | IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */ |
6472 | IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */ |
6473 | |
6474 | IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */ |
6475 | IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */ |
6476 | IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */ |
6477 | IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */ |
6478 | IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */ |
6479 | IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */ |
6480 | IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */ |
6481 | |
6482 | IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */ |
6483 | |
6484 | IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */ |
6485 | IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */ |
6486 | IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */ |
6487 | IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */ |
6488 | IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */ |
6489 | IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */ |
6490 | IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */ |
6491 | |
6492 | IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */ |
6493 | IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */ |
6494 | IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */ |
6495 | IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */ |
6496 | IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */ |
6497 | IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */ |
6498 | |
6499 | IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */ |
6500 | {0,}, |
6501 | }; |
6502 | |
6503 | MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table); |
6504 | |
6505 | static SIMPLE_DEV_PM_OPS(ipw2100_pm_ops, ipw2100_suspend, ipw2100_resume); |
6506 | |
6507 | static struct pci_driver ipw2100_pci_driver = { |
6508 | .name = DRV_NAME, |
6509 | .id_table = ipw2100_pci_id_table, |
6510 | .probe = ipw2100_pci_init_one, |
6511 | .remove = ipw2100_pci_remove_one, |
6512 | .driver.pm = &ipw2100_pm_ops, |
6513 | .shutdown = ipw2100_shutdown, |
6514 | }; |
6515 | |
6516 | /* |
6517 | * Initialize the ipw2100 driver/module |
6518 | * |
6519 | * @returns 0 if ok, < 0 errno node con error. |
6520 | * |
6521 | * Note: we cannot init the /proc stuff until the PCI driver is there, |
6522 | * or we risk an unlikely race condition on someone accessing |
6523 | * uninitialized data in the PCI dev struct through /proc. |
6524 | */ |
6525 | static int __init ipw2100_init(void) |
6526 | { |
6527 | int ret; |
6528 | |
6529 | printk(KERN_INFO DRV_NAME ": %s, %s\n" , DRV_DESCRIPTION, DRV_VERSION); |
6530 | printk(KERN_INFO DRV_NAME ": %s\n" , DRV_COPYRIGHT); |
6531 | |
6532 | cpu_latency_qos_add_request(req: &ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE); |
6533 | |
6534 | ret = pci_register_driver(&ipw2100_pci_driver); |
6535 | if (ret) |
6536 | goto out; |
6537 | |
6538 | #ifdef CONFIG_IPW2100_DEBUG |
6539 | ipw2100_debug_level = debug; |
6540 | ret = driver_create_file(driver: &ipw2100_pci_driver.driver, |
6541 | attr: &driver_attr_debug_level); |
6542 | #endif |
6543 | |
6544 | out: |
6545 | return ret; |
6546 | } |
6547 | |
6548 | /* |
6549 | * Cleanup ipw2100 driver registration |
6550 | */ |
6551 | static void __exit ipw2100_exit(void) |
6552 | { |
6553 | /* FIXME: IPG: check that we have no instances of the devices open */ |
6554 | #ifdef CONFIG_IPW2100_DEBUG |
6555 | driver_remove_file(driver: &ipw2100_pci_driver.driver, |
6556 | attr: &driver_attr_debug_level); |
6557 | #endif |
6558 | pci_unregister_driver(dev: &ipw2100_pci_driver); |
6559 | cpu_latency_qos_remove_request(req: &ipw2100_pm_qos_req); |
6560 | } |
6561 | |
6562 | module_init(ipw2100_init); |
6563 | module_exit(ipw2100_exit); |
6564 | |
6565 | static int ipw2100_wx_get_name(struct net_device *dev, |
6566 | struct iw_request_info *info, |
6567 | union iwreq_data *wrqu, char *) |
6568 | { |
6569 | /* |
6570 | * This can be called at any time. No action lock required |
6571 | */ |
6572 | |
6573 | struct ipw2100_priv *priv = libipw_priv(dev); |
6574 | if (!(priv->status & STATUS_ASSOCIATED)) |
6575 | strcpy(p: wrqu->name, q: "unassociated" ); |
6576 | else |
6577 | snprintf(buf: wrqu->name, IFNAMSIZ, fmt: "IEEE 802.11b" ); |
6578 | |
6579 | IPW_DEBUG_WX("Name: %s\n" , wrqu->name); |
6580 | return 0; |
6581 | } |
6582 | |
6583 | static int ipw2100_wx_set_freq(struct net_device *dev, |
6584 | struct iw_request_info *info, |
6585 | union iwreq_data *wrqu, char *) |
6586 | { |
6587 | struct ipw2100_priv *priv = libipw_priv(dev); |
6588 | struct iw_freq *fwrq = &wrqu->freq; |
6589 | int err = 0; |
6590 | |
6591 | if (priv->ieee->iw_mode == IW_MODE_INFRA) |
6592 | return -EOPNOTSUPP; |
6593 | |
6594 | mutex_lock(&priv->action_mutex); |
6595 | if (!(priv->status & STATUS_INITIALIZED)) { |
6596 | err = -EIO; |
6597 | goto done; |
6598 | } |
6599 | |
6600 | /* if setting by freq convert to channel */ |
6601 | if (fwrq->e == 1) { |
6602 | if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) { |
6603 | int f = fwrq->m / 100000; |
6604 | int c = 0; |
6605 | |
6606 | while ((c < REG_MAX_CHANNEL) && |
6607 | (f != ipw2100_frequencies[c])) |
6608 | c++; |
6609 | |
6610 | /* hack to fall through */ |
6611 | fwrq->e = 0; |
6612 | fwrq->m = c + 1; |
6613 | } |
6614 | } |
6615 | |
6616 | if (fwrq->e > 0 || fwrq->m > 1000) { |
6617 | err = -EOPNOTSUPP; |
6618 | goto done; |
6619 | } else { /* Set the channel */ |
6620 | IPW_DEBUG_WX("SET Freq/Channel -> %d\n" , fwrq->m); |
6621 | err = ipw2100_set_channel(priv, channel: fwrq->m, batch_mode: 0); |
6622 | } |
6623 | |
6624 | done: |
6625 | mutex_unlock(lock: &priv->action_mutex); |
6626 | return err; |
6627 | } |
6628 | |
6629 | static int ipw2100_wx_get_freq(struct net_device *dev, |
6630 | struct iw_request_info *info, |
6631 | union iwreq_data *wrqu, char *) |
6632 | { |
6633 | /* |
6634 | * This can be called at any time. No action lock required |
6635 | */ |
6636 | |
6637 | struct ipw2100_priv *priv = libipw_priv(dev); |
6638 | |
6639 | wrqu->freq.e = 0; |
6640 | |
6641 | /* If we are associated, trying to associate, or have a statically |
6642 | * configured CHANNEL then return that; otherwise return ANY */ |
6643 | if (priv->config & CFG_STATIC_CHANNEL || |
6644 | priv->status & STATUS_ASSOCIATED) |
6645 | wrqu->freq.m = priv->channel; |
6646 | else |
6647 | wrqu->freq.m = 0; |
6648 | |
6649 | IPW_DEBUG_WX("GET Freq/Channel -> %d\n" , priv->channel); |
6650 | return 0; |
6651 | |
6652 | } |
6653 | |
6654 | static int ipw2100_wx_set_mode(struct net_device *dev, |
6655 | struct iw_request_info *info, |
6656 | union iwreq_data *wrqu, char *) |
6657 | { |
6658 | struct ipw2100_priv *priv = libipw_priv(dev); |
6659 | int err = 0; |
6660 | |
6661 | IPW_DEBUG_WX("SET Mode -> %d\n" , wrqu->mode); |
6662 | |
6663 | if (wrqu->mode == priv->ieee->iw_mode) |
6664 | return 0; |
6665 | |
6666 | mutex_lock(&priv->action_mutex); |
6667 | if (!(priv->status & STATUS_INITIALIZED)) { |
6668 | err = -EIO; |
6669 | goto done; |
6670 | } |
6671 | |
6672 | switch (wrqu->mode) { |
6673 | #ifdef CONFIG_IPW2100_MONITOR |
6674 | case IW_MODE_MONITOR: |
6675 | err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
6676 | break; |
6677 | #endif /* CONFIG_IPW2100_MONITOR */ |
6678 | case IW_MODE_ADHOC: |
6679 | err = ipw2100_switch_mode(priv, IW_MODE_ADHOC); |
6680 | break; |
6681 | case IW_MODE_INFRA: |
6682 | case IW_MODE_AUTO: |
6683 | default: |
6684 | err = ipw2100_switch_mode(priv, IW_MODE_INFRA); |
6685 | break; |
6686 | } |
6687 | |
6688 | done: |
6689 | mutex_unlock(lock: &priv->action_mutex); |
6690 | return err; |
6691 | } |
6692 | |
6693 | static int ipw2100_wx_get_mode(struct net_device *dev, |
6694 | struct iw_request_info *info, |
6695 | union iwreq_data *wrqu, char *) |
6696 | { |
6697 | /* |
6698 | * This can be called at any time. No action lock required |
6699 | */ |
6700 | |
6701 | struct ipw2100_priv *priv = libipw_priv(dev); |
6702 | |
6703 | wrqu->mode = priv->ieee->iw_mode; |
6704 | IPW_DEBUG_WX("GET Mode -> %d\n" , wrqu->mode); |
6705 | |
6706 | return 0; |
6707 | } |
6708 | |
6709 | #define POWER_MODES 5 |
6710 | |
6711 | /* Values are in microsecond */ |
6712 | static const s32 timeout_duration[POWER_MODES] = { |
6713 | 350000, |
6714 | 250000, |
6715 | 75000, |
6716 | 37000, |
6717 | 25000, |
6718 | }; |
6719 | |
6720 | static const s32 period_duration[POWER_MODES] = { |
6721 | 400000, |
6722 | 700000, |
6723 | 1000000, |
6724 | 1000000, |
6725 | 1000000 |
6726 | }; |
6727 | |
6728 | static int ipw2100_wx_get_range(struct net_device *dev, |
6729 | struct iw_request_info *info, |
6730 | union iwreq_data *wrqu, char *) |
6731 | { |
6732 | /* |
6733 | * This can be called at any time. No action lock required |
6734 | */ |
6735 | |
6736 | struct ipw2100_priv *priv = libipw_priv(dev); |
6737 | struct iw_range *range = (struct iw_range *)extra; |
6738 | u16 val; |
6739 | int i, level; |
6740 | |
6741 | wrqu->data.length = sizeof(*range); |
6742 | memset(range, 0, sizeof(*range)); |
6743 | |
6744 | /* Let's try to keep this struct in the same order as in |
6745 | * linux/include/wireless.h |
6746 | */ |
6747 | |
6748 | /* TODO: See what values we can set, and remove the ones we can't |
6749 | * set, or fill them with some default data. |
6750 | */ |
6751 | |
6752 | /* ~5 Mb/s real (802.11b) */ |
6753 | range->throughput = 5 * 1000 * 1000; |
6754 | |
6755 | // range->sensitivity; /* signal level threshold range */ |
6756 | |
6757 | range->max_qual.qual = 100; |
6758 | /* TODO: Find real max RSSI and stick here */ |
6759 | range->max_qual.level = 0; |
6760 | range->max_qual.noise = 0; |
6761 | range->max_qual.updated = 7; /* Updated all three */ |
6762 | |
6763 | range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */ |
6764 | /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ |
6765 | range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM; |
6766 | range->avg_qual.noise = 0; |
6767 | range->avg_qual.updated = 7; /* Updated all three */ |
6768 | |
6769 | range->num_bitrates = RATE_COUNT; |
6770 | |
6771 | for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) { |
6772 | range->bitrate[i] = ipw2100_bg_rates[i].bitrate * 100 * 1000; |
6773 | } |
6774 | |
6775 | range->min_rts = MIN_RTS_THRESHOLD; |
6776 | range->max_rts = MAX_RTS_THRESHOLD; |
6777 | range->min_frag = MIN_FRAG_THRESHOLD; |
6778 | range->max_frag = MAX_FRAG_THRESHOLD; |
6779 | |
6780 | range->min_pmp = period_duration[0]; /* Minimal PM period */ |
6781 | range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */ |
6782 | range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */ |
6783 | range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */ |
6784 | |
6785 | /* How to decode max/min PM period */ |
6786 | range->pmp_flags = IW_POWER_PERIOD; |
6787 | /* How to decode max/min PM period */ |
6788 | range->pmt_flags = IW_POWER_TIMEOUT; |
6789 | /* What PM options are supported */ |
6790 | range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD; |
6791 | |
6792 | range->encoding_size[0] = 5; |
6793 | range->encoding_size[1] = 13; /* Different token sizes */ |
6794 | range->num_encoding_sizes = 2; /* Number of entry in the list */ |
6795 | range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */ |
6796 | // range->encoding_login_index; /* token index for login token */ |
6797 | |
6798 | if (priv->ieee->iw_mode == IW_MODE_ADHOC) { |
6799 | range->txpower_capa = IW_TXPOW_DBM; |
6800 | range->num_txpower = IW_MAX_TXPOWER; |
6801 | for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); |
6802 | i < IW_MAX_TXPOWER; |
6803 | i++, level -= |
6804 | ((IPW_TX_POWER_MAX_DBM - |
6805 | IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1)) |
6806 | range->txpower[i] = level / 16; |
6807 | } else { |
6808 | range->txpower_capa = 0; |
6809 | range->num_txpower = 0; |
6810 | } |
6811 | |
6812 | /* Set the Wireless Extension versions */ |
6813 | range->we_version_compiled = WIRELESS_EXT; |
6814 | range->we_version_source = 18; |
6815 | |
6816 | // range->retry_capa; /* What retry options are supported */ |
6817 | // range->retry_flags; /* How to decode max/min retry limit */ |
6818 | // range->r_time_flags; /* How to decode max/min retry life */ |
6819 | // range->min_retry; /* Minimal number of retries */ |
6820 | // range->max_retry; /* Maximal number of retries */ |
6821 | // range->min_r_time; /* Minimal retry lifetime */ |
6822 | // range->max_r_time; /* Maximal retry lifetime */ |
6823 | |
6824 | range->num_channels = FREQ_COUNT; |
6825 | |
6826 | val = 0; |
6827 | for (i = 0; i < FREQ_COUNT; i++) { |
6828 | // TODO: Include only legal frequencies for some countries |
6829 | // if (local->channel_mask & (1 << i)) { |
6830 | range->freq[val].i = i + 1; |
6831 | range->freq[val].m = ipw2100_frequencies[i] * 100000; |
6832 | range->freq[val].e = 1; |
6833 | val++; |
6834 | // } |
6835 | if (val == IW_MAX_FREQUENCIES) |
6836 | break; |
6837 | } |
6838 | range->num_frequency = val; |
6839 | |
6840 | /* Event capability (kernel + driver) */ |
6841 | range->event_capa[0] = (IW_EVENT_CAPA_K_0 | |
6842 | IW_EVENT_CAPA_MASK(SIOCGIWAP)); |
6843 | range->event_capa[1] = IW_EVENT_CAPA_K_1; |
6844 | |
6845 | range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 | |
6846 | IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP; |
6847 | |
6848 | IPW_DEBUG_WX("GET Range\n" ); |
6849 | |
6850 | return 0; |
6851 | } |
6852 | |
6853 | static int ipw2100_wx_set_wap(struct net_device *dev, |
6854 | struct iw_request_info *info, |
6855 | union iwreq_data *wrqu, char *) |
6856 | { |
6857 | struct ipw2100_priv *priv = libipw_priv(dev); |
6858 | int err = 0; |
6859 | |
6860 | // sanity checks |
6861 | if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) |
6862 | return -EINVAL; |
6863 | |
6864 | mutex_lock(&priv->action_mutex); |
6865 | if (!(priv->status & STATUS_INITIALIZED)) { |
6866 | err = -EIO; |
6867 | goto done; |
6868 | } |
6869 | |
6870 | if (is_broadcast_ether_addr(addr: wrqu->ap_addr.sa_data) || |
6871 | is_zero_ether_addr(addr: wrqu->ap_addr.sa_data)) { |
6872 | /* we disable mandatory BSSID association */ |
6873 | IPW_DEBUG_WX("exit - disable mandatory BSSID\n" ); |
6874 | priv->config &= ~CFG_STATIC_BSSID; |
6875 | err = ipw2100_set_mandatory_bssid(priv, NULL, batch_mode: 0); |
6876 | goto done; |
6877 | } |
6878 | |
6879 | priv->config |= CFG_STATIC_BSSID; |
6880 | memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN); |
6881 | |
6882 | err = ipw2100_set_mandatory_bssid(priv, bssid: wrqu->ap_addr.sa_data, batch_mode: 0); |
6883 | |
6884 | IPW_DEBUG_WX("SET BSSID -> %pM\n" , wrqu->ap_addr.sa_data); |
6885 | |
6886 | done: |
6887 | mutex_unlock(lock: &priv->action_mutex); |
6888 | return err; |
6889 | } |
6890 | |
6891 | static int ipw2100_wx_get_wap(struct net_device *dev, |
6892 | struct iw_request_info *info, |
6893 | union iwreq_data *wrqu, char *) |
6894 | { |
6895 | /* |
6896 | * This can be called at any time. No action lock required |
6897 | */ |
6898 | |
6899 | struct ipw2100_priv *priv = libipw_priv(dev); |
6900 | |
6901 | /* If we are associated, trying to associate, or have a statically |
6902 | * configured BSSID then return that; otherwise return ANY */ |
6903 | if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) { |
6904 | wrqu->ap_addr.sa_family = ARPHRD_ETHER; |
6905 | memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN); |
6906 | } else |
6907 | eth_zero_addr(addr: wrqu->ap_addr.sa_data); |
6908 | |
6909 | IPW_DEBUG_WX("Getting WAP BSSID: %pM\n" , wrqu->ap_addr.sa_data); |
6910 | return 0; |
6911 | } |
6912 | |
6913 | static int ipw2100_wx_set_essid(struct net_device *dev, |
6914 | struct iw_request_info *info, |
6915 | union iwreq_data *wrqu, char *) |
6916 | { |
6917 | struct ipw2100_priv *priv = libipw_priv(dev); |
6918 | char *essid = "" ; /* ANY */ |
6919 | int length = 0; |
6920 | int err = 0; |
6921 | |
6922 | mutex_lock(&priv->action_mutex); |
6923 | if (!(priv->status & STATUS_INITIALIZED)) { |
6924 | err = -EIO; |
6925 | goto done; |
6926 | } |
6927 | |
6928 | if (wrqu->essid.flags && wrqu->essid.length) { |
6929 | length = wrqu->essid.length; |
6930 | essid = extra; |
6931 | } |
6932 | |
6933 | if (length == 0) { |
6934 | IPW_DEBUG_WX("Setting ESSID to ANY\n" ); |
6935 | priv->config &= ~CFG_STATIC_ESSID; |
6936 | err = ipw2100_set_essid(priv, NULL, length: 0, batch_mode: 0); |
6937 | goto done; |
6938 | } |
6939 | |
6940 | length = min(length, IW_ESSID_MAX_SIZE); |
6941 | |
6942 | priv->config |= CFG_STATIC_ESSID; |
6943 | |
6944 | if (priv->essid_len == length && !memcmp(p: priv->essid, q: extra, size: length)) { |
6945 | IPW_DEBUG_WX("ESSID set to current ESSID.\n" ); |
6946 | err = 0; |
6947 | goto done; |
6948 | } |
6949 | |
6950 | IPW_DEBUG_WX("Setting ESSID: '%*pE' (%d)\n" , length, essid, length); |
6951 | |
6952 | priv->essid_len = length; |
6953 | memcpy(priv->essid, essid, priv->essid_len); |
6954 | |
6955 | err = ipw2100_set_essid(priv, essid, length, batch_mode: 0); |
6956 | |
6957 | done: |
6958 | mutex_unlock(lock: &priv->action_mutex); |
6959 | return err; |
6960 | } |
6961 | |
6962 | static int ipw2100_wx_get_essid(struct net_device *dev, |
6963 | struct iw_request_info *info, |
6964 | union iwreq_data *wrqu, char *) |
6965 | { |
6966 | /* |
6967 | * This can be called at any time. No action lock required |
6968 | */ |
6969 | |
6970 | struct ipw2100_priv *priv = libipw_priv(dev); |
6971 | |
6972 | /* If we are associated, trying to associate, or have a statically |
6973 | * configured ESSID then return that; otherwise return ANY */ |
6974 | if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) { |
6975 | IPW_DEBUG_WX("Getting essid: '%*pE'\n" , |
6976 | priv->essid_len, priv->essid); |
6977 | memcpy(extra, priv->essid, priv->essid_len); |
6978 | wrqu->essid.length = priv->essid_len; |
6979 | wrqu->essid.flags = 1; /* active */ |
6980 | } else { |
6981 | IPW_DEBUG_WX("Getting essid: ANY\n" ); |
6982 | wrqu->essid.length = 0; |
6983 | wrqu->essid.flags = 0; /* active */ |
6984 | } |
6985 | |
6986 | return 0; |
6987 | } |
6988 | |
6989 | static int ipw2100_wx_set_nick(struct net_device *dev, |
6990 | struct iw_request_info *info, |
6991 | union iwreq_data *wrqu, char *) |
6992 | { |
6993 | /* |
6994 | * This can be called at any time. No action lock required |
6995 | */ |
6996 | |
6997 | struct ipw2100_priv *priv = libipw_priv(dev); |
6998 | |
6999 | if (wrqu->data.length > IW_ESSID_MAX_SIZE) |
7000 | return -E2BIG; |
7001 | |
7002 | wrqu->data.length = min_t(size_t, wrqu->data.length, sizeof(priv->nick)); |
7003 | memset(priv->nick, 0, sizeof(priv->nick)); |
7004 | memcpy(priv->nick, extra, wrqu->data.length); |
7005 | |
7006 | IPW_DEBUG_WX("SET Nickname -> %s\n" , priv->nick); |
7007 | |
7008 | return 0; |
7009 | } |
7010 | |
7011 | static int ipw2100_wx_get_nick(struct net_device *dev, |
7012 | struct iw_request_info *info, |
7013 | union iwreq_data *wrqu, char *) |
7014 | { |
7015 | /* |
7016 | * This can be called at any time. No action lock required |
7017 | */ |
7018 | |
7019 | struct ipw2100_priv *priv = libipw_priv(dev); |
7020 | |
7021 | wrqu->data.length = strlen(priv->nick); |
7022 | memcpy(extra, priv->nick, wrqu->data.length); |
7023 | wrqu->data.flags = 1; /* active */ |
7024 | |
7025 | IPW_DEBUG_WX("GET Nickname -> %s\n" , extra); |
7026 | |
7027 | return 0; |
7028 | } |
7029 | |
7030 | static int ipw2100_wx_set_rate(struct net_device *dev, |
7031 | struct iw_request_info *info, |
7032 | union iwreq_data *wrqu, char *) |
7033 | { |
7034 | struct ipw2100_priv *priv = libipw_priv(dev); |
7035 | u32 target_rate = wrqu->bitrate.value; |
7036 | u32 rate; |
7037 | int err = 0; |
7038 | |
7039 | mutex_lock(&priv->action_mutex); |
7040 | if (!(priv->status & STATUS_INITIALIZED)) { |
7041 | err = -EIO; |
7042 | goto done; |
7043 | } |
7044 | |
7045 | rate = 0; |
7046 | |
7047 | if (target_rate == 1000000 || |
7048 | (!wrqu->bitrate.fixed && target_rate > 1000000)) |
7049 | rate |= TX_RATE_1_MBIT; |
7050 | if (target_rate == 2000000 || |
7051 | (!wrqu->bitrate.fixed && target_rate > 2000000)) |
7052 | rate |= TX_RATE_2_MBIT; |
7053 | if (target_rate == 5500000 || |
7054 | (!wrqu->bitrate.fixed && target_rate > 5500000)) |
7055 | rate |= TX_RATE_5_5_MBIT; |
7056 | if (target_rate == 11000000 || |
7057 | (!wrqu->bitrate.fixed && target_rate > 11000000)) |
7058 | rate |= TX_RATE_11_MBIT; |
7059 | if (rate == 0) |
7060 | rate = DEFAULT_TX_RATES; |
7061 | |
7062 | err = ipw2100_set_tx_rates(priv, rate, batch_mode: 0); |
7063 | |
7064 | IPW_DEBUG_WX("SET Rate -> %04X\n" , rate); |
7065 | done: |
7066 | mutex_unlock(lock: &priv->action_mutex); |
7067 | return err; |
7068 | } |
7069 | |
7070 | static int ipw2100_wx_get_rate(struct net_device *dev, |
7071 | struct iw_request_info *info, |
7072 | union iwreq_data *wrqu, char *) |
7073 | { |
7074 | struct ipw2100_priv *priv = libipw_priv(dev); |
7075 | int val; |
7076 | unsigned int len = sizeof(val); |
7077 | int err = 0; |
7078 | |
7079 | if (!(priv->status & STATUS_ENABLED) || |
7080 | priv->status & STATUS_RF_KILL_MASK || |
7081 | !(priv->status & STATUS_ASSOCIATED)) { |
7082 | wrqu->bitrate.value = 0; |
7083 | return 0; |
7084 | } |
7085 | |
7086 | mutex_lock(&priv->action_mutex); |
7087 | if (!(priv->status & STATUS_INITIALIZED)) { |
7088 | err = -EIO; |
7089 | goto done; |
7090 | } |
7091 | |
7092 | err = ipw2100_get_ordinal(priv, ord: IPW_ORD_CURRENT_TX_RATE, val: &val, len: &len); |
7093 | if (err) { |
7094 | IPW_DEBUG_WX("failed querying ordinals.\n" ); |
7095 | goto done; |
7096 | } |
7097 | |
7098 | switch (val & TX_RATE_MASK) { |
7099 | case TX_RATE_1_MBIT: |
7100 | wrqu->bitrate.value = 1000000; |
7101 | break; |
7102 | case TX_RATE_2_MBIT: |
7103 | wrqu->bitrate.value = 2000000; |
7104 | break; |
7105 | case TX_RATE_5_5_MBIT: |
7106 | wrqu->bitrate.value = 5500000; |
7107 | break; |
7108 | case TX_RATE_11_MBIT: |
7109 | wrqu->bitrate.value = 11000000; |
7110 | break; |
7111 | default: |
7112 | wrqu->bitrate.value = 0; |
7113 | } |
7114 | |
7115 | IPW_DEBUG_WX("GET Rate -> %d\n" , wrqu->bitrate.value); |
7116 | |
7117 | done: |
7118 | mutex_unlock(lock: &priv->action_mutex); |
7119 | return err; |
7120 | } |
7121 | |
7122 | static int ipw2100_wx_set_rts(struct net_device *dev, |
7123 | struct iw_request_info *info, |
7124 | union iwreq_data *wrqu, char *) |
7125 | { |
7126 | struct ipw2100_priv *priv = libipw_priv(dev); |
7127 | int value, err; |
7128 | |
7129 | /* Auto RTS not yet supported */ |
7130 | if (wrqu->rts.fixed == 0) |
7131 | return -EINVAL; |
7132 | |
7133 | mutex_lock(&priv->action_mutex); |
7134 | if (!(priv->status & STATUS_INITIALIZED)) { |
7135 | err = -EIO; |
7136 | goto done; |
7137 | } |
7138 | |
7139 | if (wrqu->rts.disabled) |
7140 | value = priv->rts_threshold | RTS_DISABLED; |
7141 | else { |
7142 | if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) { |
7143 | err = -EINVAL; |
7144 | goto done; |
7145 | } |
7146 | value = wrqu->rts.value; |
7147 | } |
7148 | |
7149 | err = ipw2100_set_rts_threshold(priv, threshold: value); |
7150 | |
7151 | IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n" , value); |
7152 | done: |
7153 | mutex_unlock(lock: &priv->action_mutex); |
7154 | return err; |
7155 | } |
7156 | |
7157 | static int ipw2100_wx_get_rts(struct net_device *dev, |
7158 | struct iw_request_info *info, |
7159 | union iwreq_data *wrqu, char *) |
7160 | { |
7161 | /* |
7162 | * This can be called at any time. No action lock required |
7163 | */ |
7164 | |
7165 | struct ipw2100_priv *priv = libipw_priv(dev); |
7166 | |
7167 | wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED; |
7168 | wrqu->rts.fixed = 1; /* no auto select */ |
7169 | |
7170 | /* If RTS is set to the default value, then it is disabled */ |
7171 | wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0; |
7172 | |
7173 | IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n" , wrqu->rts.value); |
7174 | |
7175 | return 0; |
7176 | } |
7177 | |
7178 | static int ipw2100_wx_set_txpow(struct net_device *dev, |
7179 | struct iw_request_info *info, |
7180 | union iwreq_data *wrqu, char *) |
7181 | { |
7182 | struct ipw2100_priv *priv = libipw_priv(dev); |
7183 | int err = 0, value; |
7184 | |
7185 | if (ipw_radio_kill_sw(priv, disable_radio: wrqu->txpower.disabled)) |
7186 | return -EINPROGRESS; |
7187 | |
7188 | if (priv->ieee->iw_mode != IW_MODE_ADHOC) |
7189 | return 0; |
7190 | |
7191 | if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM) |
7192 | return -EINVAL; |
7193 | |
7194 | if (wrqu->txpower.fixed == 0) |
7195 | value = IPW_TX_POWER_DEFAULT; |
7196 | else { |
7197 | if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM || |
7198 | wrqu->txpower.value > IPW_TX_POWER_MAX_DBM) |
7199 | return -EINVAL; |
7200 | |
7201 | value = wrqu->txpower.value; |
7202 | } |
7203 | |
7204 | mutex_lock(&priv->action_mutex); |
7205 | if (!(priv->status & STATUS_INITIALIZED)) { |
7206 | err = -EIO; |
7207 | goto done; |
7208 | } |
7209 | |
7210 | err = ipw2100_set_tx_power(priv, tx_power: value); |
7211 | |
7212 | IPW_DEBUG_WX("SET TX Power -> %d\n" , value); |
7213 | |
7214 | done: |
7215 | mutex_unlock(lock: &priv->action_mutex); |
7216 | return err; |
7217 | } |
7218 | |
7219 | static int ipw2100_wx_get_txpow(struct net_device *dev, |
7220 | struct iw_request_info *info, |
7221 | union iwreq_data *wrqu, char *) |
7222 | { |
7223 | /* |
7224 | * This can be called at any time. No action lock required |
7225 | */ |
7226 | |
7227 | struct ipw2100_priv *priv = libipw_priv(dev); |
7228 | |
7229 | wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0; |
7230 | |
7231 | if (priv->tx_power == IPW_TX_POWER_DEFAULT) { |
7232 | wrqu->txpower.fixed = 0; |
7233 | wrqu->txpower.value = IPW_TX_POWER_MAX_DBM; |
7234 | } else { |
7235 | wrqu->txpower.fixed = 1; |
7236 | wrqu->txpower.value = priv->tx_power; |
7237 | } |
7238 | |
7239 | wrqu->txpower.flags = IW_TXPOW_DBM; |
7240 | |
7241 | IPW_DEBUG_WX("GET TX Power -> %d\n" , wrqu->txpower.value); |
7242 | |
7243 | return 0; |
7244 | } |
7245 | |
7246 | static int ipw2100_wx_set_frag(struct net_device *dev, |
7247 | struct iw_request_info *info, |
7248 | union iwreq_data *wrqu, char *) |
7249 | { |
7250 | /* |
7251 | * This can be called at any time. No action lock required |
7252 | */ |
7253 | |
7254 | struct ipw2100_priv *priv = libipw_priv(dev); |
7255 | |
7256 | if (!wrqu->frag.fixed) |
7257 | return -EINVAL; |
7258 | |
7259 | if (wrqu->frag.disabled) { |
7260 | priv->frag_threshold |= FRAG_DISABLED; |
7261 | priv->ieee->fts = DEFAULT_FTS; |
7262 | } else { |
7263 | if (wrqu->frag.value < MIN_FRAG_THRESHOLD || |
7264 | wrqu->frag.value > MAX_FRAG_THRESHOLD) |
7265 | return -EINVAL; |
7266 | |
7267 | priv->ieee->fts = wrqu->frag.value & ~0x1; |
7268 | priv->frag_threshold = priv->ieee->fts; |
7269 | } |
7270 | |
7271 | IPW_DEBUG_WX("SET Frag Threshold -> %d\n" , priv->ieee->fts); |
7272 | |
7273 | return 0; |
7274 | } |
7275 | |
7276 | static int ipw2100_wx_get_frag(struct net_device *dev, |
7277 | struct iw_request_info *info, |
7278 | union iwreq_data *wrqu, char *) |
7279 | { |
7280 | /* |
7281 | * This can be called at any time. No action lock required |
7282 | */ |
7283 | |
7284 | struct ipw2100_priv *priv = libipw_priv(dev); |
7285 | wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED; |
7286 | wrqu->frag.fixed = 0; /* no auto select */ |
7287 | wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0; |
7288 | |
7289 | IPW_DEBUG_WX("GET Frag Threshold -> %d\n" , wrqu->frag.value); |
7290 | |
7291 | return 0; |
7292 | } |
7293 | |
7294 | static int ipw2100_wx_set_retry(struct net_device *dev, |
7295 | struct iw_request_info *info, |
7296 | union iwreq_data *wrqu, char *) |
7297 | { |
7298 | struct ipw2100_priv *priv = libipw_priv(dev); |
7299 | int err = 0; |
7300 | |
7301 | if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled) |
7302 | return -EINVAL; |
7303 | |
7304 | if (!(wrqu->retry.flags & IW_RETRY_LIMIT)) |
7305 | return 0; |
7306 | |
7307 | mutex_lock(&priv->action_mutex); |
7308 | if (!(priv->status & STATUS_INITIALIZED)) { |
7309 | err = -EIO; |
7310 | goto done; |
7311 | } |
7312 | |
7313 | if (wrqu->retry.flags & IW_RETRY_SHORT) { |
7314 | err = ipw2100_set_short_retry(priv, retry: wrqu->retry.value); |
7315 | IPW_DEBUG_WX("SET Short Retry Limit -> %d\n" , |
7316 | wrqu->retry.value); |
7317 | goto done; |
7318 | } |
7319 | |
7320 | if (wrqu->retry.flags & IW_RETRY_LONG) { |
7321 | err = ipw2100_set_long_retry(priv, retry: wrqu->retry.value); |
7322 | IPW_DEBUG_WX("SET Long Retry Limit -> %d\n" , |
7323 | wrqu->retry.value); |
7324 | goto done; |
7325 | } |
7326 | |
7327 | err = ipw2100_set_short_retry(priv, retry: wrqu->retry.value); |
7328 | if (!err) |
7329 | err = ipw2100_set_long_retry(priv, retry: wrqu->retry.value); |
7330 | |
7331 | IPW_DEBUG_WX("SET Both Retry Limits -> %d\n" , wrqu->retry.value); |
7332 | |
7333 | done: |
7334 | mutex_unlock(lock: &priv->action_mutex); |
7335 | return err; |
7336 | } |
7337 | |
7338 | static int ipw2100_wx_get_retry(struct net_device *dev, |
7339 | struct iw_request_info *info, |
7340 | union iwreq_data *wrqu, char *) |
7341 | { |
7342 | /* |
7343 | * This can be called at any time. No action lock required |
7344 | */ |
7345 | |
7346 | struct ipw2100_priv *priv = libipw_priv(dev); |
7347 | |
7348 | wrqu->retry.disabled = 0; /* can't be disabled */ |
7349 | |
7350 | if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) |
7351 | return -EINVAL; |
7352 | |
7353 | if (wrqu->retry.flags & IW_RETRY_LONG) { |
7354 | wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; |
7355 | wrqu->retry.value = priv->long_retry_limit; |
7356 | } else { |
7357 | wrqu->retry.flags = |
7358 | (priv->short_retry_limit != |
7359 | priv->long_retry_limit) ? |
7360 | IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT; |
7361 | |
7362 | wrqu->retry.value = priv->short_retry_limit; |
7363 | } |
7364 | |
7365 | IPW_DEBUG_WX("GET Retry -> %d\n" , wrqu->retry.value); |
7366 | |
7367 | return 0; |
7368 | } |
7369 | |
7370 | static int ipw2100_wx_set_scan(struct net_device *dev, |
7371 | struct iw_request_info *info, |
7372 | union iwreq_data *wrqu, char *) |
7373 | { |
7374 | struct ipw2100_priv *priv = libipw_priv(dev); |
7375 | int err = 0; |
7376 | |
7377 | mutex_lock(&priv->action_mutex); |
7378 | if (!(priv->status & STATUS_INITIALIZED)) { |
7379 | err = -EIO; |
7380 | goto done; |
7381 | } |
7382 | |
7383 | IPW_DEBUG_WX("Initiating scan...\n" ); |
7384 | |
7385 | priv->user_requested_scan = 1; |
7386 | if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) { |
7387 | IPW_DEBUG_WX("Start scan failed.\n" ); |
7388 | |
7389 | /* TODO: Mark a scan as pending so when hardware initialized |
7390 | * a scan starts */ |
7391 | } |
7392 | |
7393 | done: |
7394 | mutex_unlock(lock: &priv->action_mutex); |
7395 | return err; |
7396 | } |
7397 | |
7398 | static int ipw2100_wx_get_scan(struct net_device *dev, |
7399 | struct iw_request_info *info, |
7400 | union iwreq_data *wrqu, char *) |
7401 | { |
7402 | /* |
7403 | * This can be called at any time. No action lock required |
7404 | */ |
7405 | |
7406 | struct ipw2100_priv *priv = libipw_priv(dev); |
7407 | return libipw_wx_get_scan(ieee: priv->ieee, info, wrqu, key: extra); |
7408 | } |
7409 | |
7410 | /* |
7411 | * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c |
7412 | */ |
7413 | static int ipw2100_wx_set_encode(struct net_device *dev, |
7414 | struct iw_request_info *info, |
7415 | union iwreq_data *wrqu, char *key) |
7416 | { |
7417 | /* |
7418 | * No check of STATUS_INITIALIZED required |
7419 | */ |
7420 | |
7421 | struct ipw2100_priv *priv = libipw_priv(dev); |
7422 | return libipw_wx_set_encode(ieee: priv->ieee, info, wrqu, key); |
7423 | } |
7424 | |
7425 | static int ipw2100_wx_get_encode(struct net_device *dev, |
7426 | struct iw_request_info *info, |
7427 | union iwreq_data *wrqu, char *key) |
7428 | { |
7429 | /* |
7430 | * This can be called at any time. No action lock required |
7431 | */ |
7432 | |
7433 | struct ipw2100_priv *priv = libipw_priv(dev); |
7434 | return libipw_wx_get_encode(ieee: priv->ieee, info, wrqu, key); |
7435 | } |
7436 | |
7437 | static int ipw2100_wx_set_power(struct net_device *dev, |
7438 | struct iw_request_info *info, |
7439 | union iwreq_data *wrqu, char *) |
7440 | { |
7441 | struct ipw2100_priv *priv = libipw_priv(dev); |
7442 | int err = 0; |
7443 | |
7444 | mutex_lock(&priv->action_mutex); |
7445 | if (!(priv->status & STATUS_INITIALIZED)) { |
7446 | err = -EIO; |
7447 | goto done; |
7448 | } |
7449 | |
7450 | if (wrqu->power.disabled) { |
7451 | priv->power_mode = IPW_POWER_LEVEL(priv->power_mode); |
7452 | err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM); |
7453 | IPW_DEBUG_WX("SET Power Management Mode -> off\n" ); |
7454 | goto done; |
7455 | } |
7456 | |
7457 | switch (wrqu->power.flags & IW_POWER_MODE) { |
7458 | case IW_POWER_ON: /* If not specified */ |
7459 | case IW_POWER_MODE: /* If set all mask */ |
7460 | case IW_POWER_ALL_R: /* If explicitly state all */ |
7461 | break; |
7462 | default: /* Otherwise we don't support it */ |
7463 | IPW_DEBUG_WX("SET PM Mode: %X not supported.\n" , |
7464 | wrqu->power.flags); |
7465 | err = -EOPNOTSUPP; |
7466 | goto done; |
7467 | } |
7468 | |
7469 | /* If the user hasn't specified a power management mode yet, default |
7470 | * to BATTERY */ |
7471 | priv->power_mode = IPW_POWER_ENABLED | priv->power_mode; |
7472 | err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode)); |
7473 | |
7474 | IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n" , priv->power_mode); |
7475 | |
7476 | done: |
7477 | mutex_unlock(lock: &priv->action_mutex); |
7478 | return err; |
7479 | |
7480 | } |
7481 | |
7482 | static int ipw2100_wx_get_power(struct net_device *dev, |
7483 | struct iw_request_info *info, |
7484 | union iwreq_data *wrqu, char *) |
7485 | { |
7486 | /* |
7487 | * This can be called at any time. No action lock required |
7488 | */ |
7489 | |
7490 | struct ipw2100_priv *priv = libipw_priv(dev); |
7491 | |
7492 | if (!(priv->power_mode & IPW_POWER_ENABLED)) |
7493 | wrqu->power.disabled = 1; |
7494 | else { |
7495 | wrqu->power.disabled = 0; |
7496 | wrqu->power.flags = 0; |
7497 | } |
7498 | |
7499 | IPW_DEBUG_WX("GET Power Management Mode -> %02X\n" , priv->power_mode); |
7500 | |
7501 | return 0; |
7502 | } |
7503 | |
7504 | /* |
7505 | * WE-18 WPA support |
7506 | */ |
7507 | |
7508 | /* SIOCSIWGENIE */ |
7509 | static int ipw2100_wx_set_genie(struct net_device *dev, |
7510 | struct iw_request_info *info, |
7511 | union iwreq_data *wrqu, char *) |
7512 | { |
7513 | |
7514 | struct ipw2100_priv *priv = libipw_priv(dev); |
7515 | struct libipw_device *ieee = priv->ieee; |
7516 | u8 *buf; |
7517 | |
7518 | if (!ieee->wpa_enabled) |
7519 | return -EOPNOTSUPP; |
7520 | |
7521 | if (wrqu->data.length > MAX_WPA_IE_LEN || |
7522 | (wrqu->data.length && extra == NULL)) |
7523 | return -EINVAL; |
7524 | |
7525 | if (wrqu->data.length) { |
7526 | buf = kmemdup(p: extra, size: wrqu->data.length, GFP_KERNEL); |
7527 | if (buf == NULL) |
7528 | return -ENOMEM; |
7529 | |
7530 | kfree(objp: ieee->wpa_ie); |
7531 | ieee->wpa_ie = buf; |
7532 | ieee->wpa_ie_len = wrqu->data.length; |
7533 | } else { |
7534 | kfree(objp: ieee->wpa_ie); |
7535 | ieee->wpa_ie = NULL; |
7536 | ieee->wpa_ie_len = 0; |
7537 | } |
7538 | |
7539 | ipw2100_wpa_assoc_frame(priv, wpa_ie: ieee->wpa_ie, wpa_ie_len: ieee->wpa_ie_len); |
7540 | |
7541 | return 0; |
7542 | } |
7543 | |
7544 | /* SIOCGIWGENIE */ |
7545 | static int ipw2100_wx_get_genie(struct net_device *dev, |
7546 | struct iw_request_info *info, |
7547 | union iwreq_data *wrqu, char *) |
7548 | { |
7549 | struct ipw2100_priv *priv = libipw_priv(dev); |
7550 | struct libipw_device *ieee = priv->ieee; |
7551 | |
7552 | if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) { |
7553 | wrqu->data.length = 0; |
7554 | return 0; |
7555 | } |
7556 | |
7557 | if (wrqu->data.length < ieee->wpa_ie_len) |
7558 | return -E2BIG; |
7559 | |
7560 | wrqu->data.length = ieee->wpa_ie_len; |
7561 | memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len); |
7562 | |
7563 | return 0; |
7564 | } |
7565 | |
7566 | /* SIOCSIWAUTH */ |
7567 | static int ipw2100_wx_set_auth(struct net_device *dev, |
7568 | struct iw_request_info *info, |
7569 | union iwreq_data *wrqu, char *) |
7570 | { |
7571 | struct ipw2100_priv *priv = libipw_priv(dev); |
7572 | struct libipw_device *ieee = priv->ieee; |
7573 | struct iw_param *param = &wrqu->param; |
7574 | struct lib80211_crypt_data *crypt; |
7575 | unsigned long flags; |
7576 | int ret = 0; |
7577 | |
7578 | switch (param->flags & IW_AUTH_INDEX) { |
7579 | case IW_AUTH_WPA_VERSION: |
7580 | case IW_AUTH_CIPHER_PAIRWISE: |
7581 | case IW_AUTH_CIPHER_GROUP: |
7582 | case IW_AUTH_KEY_MGMT: |
7583 | /* |
7584 | * ipw2200 does not use these parameters |
7585 | */ |
7586 | break; |
7587 | |
7588 | case IW_AUTH_TKIP_COUNTERMEASURES: |
7589 | crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
7590 | if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) |
7591 | break; |
7592 | |
7593 | flags = crypt->ops->get_flags(crypt->priv); |
7594 | |
7595 | if (param->value) |
7596 | flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
7597 | else |
7598 | flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES; |
7599 | |
7600 | crypt->ops->set_flags(flags, crypt->priv); |
7601 | |
7602 | break; |
7603 | |
7604 | case IW_AUTH_DROP_UNENCRYPTED:{ |
7605 | /* HACK: |
7606 | * |
7607 | * wpa_supplicant calls set_wpa_enabled when the driver |
7608 | * is loaded and unloaded, regardless of if WPA is being |
7609 | * used. No other calls are made which can be used to |
7610 | * determine if encryption will be used or not prior to |
7611 | * association being expected. If encryption is not being |
7612 | * used, drop_unencrypted is set to false, else true -- we |
7613 | * can use this to determine if the CAP_PRIVACY_ON bit should |
7614 | * be set. |
7615 | */ |
7616 | struct libipw_security sec = { |
7617 | .flags = SEC_ENABLED, |
7618 | .enabled = param->value, |
7619 | }; |
7620 | priv->ieee->drop_unencrypted = param->value; |
7621 | /* We only change SEC_LEVEL for open mode. Others |
7622 | * are set by ipw_wpa_set_encryption. |
7623 | */ |
7624 | if (!param->value) { |
7625 | sec.flags |= SEC_LEVEL; |
7626 | sec.level = SEC_LEVEL_0; |
7627 | } else { |
7628 | sec.flags |= SEC_LEVEL; |
7629 | sec.level = SEC_LEVEL_1; |
7630 | } |
7631 | if (priv->ieee->set_security) |
7632 | priv->ieee->set_security(priv->ieee->dev, &sec); |
7633 | break; |
7634 | } |
7635 | |
7636 | case IW_AUTH_80211_AUTH_ALG: |
7637 | ret = ipw2100_wpa_set_auth_algs(priv, value: param->value); |
7638 | break; |
7639 | |
7640 | case IW_AUTH_WPA_ENABLED: |
7641 | ret = ipw2100_wpa_enable(priv, value: param->value); |
7642 | break; |
7643 | |
7644 | case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
7645 | ieee->ieee802_1x = param->value; |
7646 | break; |
7647 | |
7648 | //case IW_AUTH_ROAMING_CONTROL: |
7649 | case IW_AUTH_PRIVACY_INVOKED: |
7650 | ieee->privacy_invoked = param->value; |
7651 | break; |
7652 | |
7653 | default: |
7654 | return -EOPNOTSUPP; |
7655 | } |
7656 | return ret; |
7657 | } |
7658 | |
7659 | /* SIOCGIWAUTH */ |
7660 | static int ipw2100_wx_get_auth(struct net_device *dev, |
7661 | struct iw_request_info *info, |
7662 | union iwreq_data *wrqu, char *) |
7663 | { |
7664 | struct ipw2100_priv *priv = libipw_priv(dev); |
7665 | struct libipw_device *ieee = priv->ieee; |
7666 | struct lib80211_crypt_data *crypt; |
7667 | struct iw_param *param = &wrqu->param; |
7668 | |
7669 | switch (param->flags & IW_AUTH_INDEX) { |
7670 | case IW_AUTH_WPA_VERSION: |
7671 | case IW_AUTH_CIPHER_PAIRWISE: |
7672 | case IW_AUTH_CIPHER_GROUP: |
7673 | case IW_AUTH_KEY_MGMT: |
7674 | /* |
7675 | * wpa_supplicant will control these internally |
7676 | */ |
7677 | break; |
7678 | |
7679 | case IW_AUTH_TKIP_COUNTERMEASURES: |
7680 | crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx]; |
7681 | if (!crypt || !crypt->ops->get_flags) { |
7682 | IPW_DEBUG_WARNING("Can't get TKIP countermeasures: " |
7683 | "crypt not set!\n" ); |
7684 | break; |
7685 | } |
7686 | |
7687 | param->value = (crypt->ops->get_flags(crypt->priv) & |
7688 | IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0; |
7689 | |
7690 | break; |
7691 | |
7692 | case IW_AUTH_DROP_UNENCRYPTED: |
7693 | param->value = ieee->drop_unencrypted; |
7694 | break; |
7695 | |
7696 | case IW_AUTH_80211_AUTH_ALG: |
7697 | param->value = priv->ieee->sec.auth_mode; |
7698 | break; |
7699 | |
7700 | case IW_AUTH_WPA_ENABLED: |
7701 | param->value = ieee->wpa_enabled; |
7702 | break; |
7703 | |
7704 | case IW_AUTH_RX_UNENCRYPTED_EAPOL: |
7705 | param->value = ieee->ieee802_1x; |
7706 | break; |
7707 | |
7708 | case IW_AUTH_ROAMING_CONTROL: |
7709 | case IW_AUTH_PRIVACY_INVOKED: |
7710 | param->value = ieee->privacy_invoked; |
7711 | break; |
7712 | |
7713 | default: |
7714 | return -EOPNOTSUPP; |
7715 | } |
7716 | return 0; |
7717 | } |
7718 | |
7719 | /* SIOCSIWENCODEEXT */ |
7720 | static int ipw2100_wx_set_encodeext(struct net_device *dev, |
7721 | struct iw_request_info *info, |
7722 | union iwreq_data *wrqu, char *) |
7723 | { |
7724 | struct ipw2100_priv *priv = libipw_priv(dev); |
7725 | return libipw_wx_set_encodeext(ieee: priv->ieee, info, wrqu, extra); |
7726 | } |
7727 | |
7728 | /* SIOCGIWENCODEEXT */ |
7729 | static int ipw2100_wx_get_encodeext(struct net_device *dev, |
7730 | struct iw_request_info *info, |
7731 | union iwreq_data *wrqu, char *) |
7732 | { |
7733 | struct ipw2100_priv *priv = libipw_priv(dev); |
7734 | return libipw_wx_get_encodeext(ieee: priv->ieee, info, wrqu, extra); |
7735 | } |
7736 | |
7737 | /* SIOCSIWMLME */ |
7738 | static int ipw2100_wx_set_mlme(struct net_device *dev, |
7739 | struct iw_request_info *info, |
7740 | union iwreq_data *wrqu, char *) |
7741 | { |
7742 | struct ipw2100_priv *priv = libipw_priv(dev); |
7743 | struct iw_mlme *mlme = (struct iw_mlme *)extra; |
7744 | |
7745 | switch (mlme->cmd) { |
7746 | case IW_MLME_DEAUTH: |
7747 | // silently ignore |
7748 | break; |
7749 | |
7750 | case IW_MLME_DISASSOC: |
7751 | ipw2100_disassociate_bssid(priv); |
7752 | break; |
7753 | |
7754 | default: |
7755 | return -EOPNOTSUPP; |
7756 | } |
7757 | return 0; |
7758 | } |
7759 | |
7760 | /* |
7761 | * |
7762 | * IWPRIV handlers |
7763 | * |
7764 | */ |
7765 | #ifdef CONFIG_IPW2100_MONITOR |
7766 | static int ipw2100_wx_set_promisc(struct net_device *dev, |
7767 | struct iw_request_info *info, |
7768 | union iwreq_data *wrqu, char *) |
7769 | { |
7770 | struct ipw2100_priv *priv = libipw_priv(dev); |
7771 | int *parms = (int *)extra; |
7772 | int enable = (parms[0] > 0); |
7773 | int err = 0; |
7774 | |
7775 | mutex_lock(&priv->action_mutex); |
7776 | if (!(priv->status & STATUS_INITIALIZED)) { |
7777 | err = -EIO; |
7778 | goto done; |
7779 | } |
7780 | |
7781 | if (enable) { |
7782 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) { |
7783 | err = ipw2100_set_channel(priv, channel: parms[1], batch_mode: 0); |
7784 | goto done; |
7785 | } |
7786 | priv->channel = parms[1]; |
7787 | err = ipw2100_switch_mode(priv, IW_MODE_MONITOR); |
7788 | } else { |
7789 | if (priv->ieee->iw_mode == IW_MODE_MONITOR) |
7790 | err = ipw2100_switch_mode(priv, mode: priv->last_mode); |
7791 | } |
7792 | done: |
7793 | mutex_unlock(lock: &priv->action_mutex); |
7794 | return err; |
7795 | } |
7796 | |
7797 | static int ipw2100_wx_reset(struct net_device *dev, |
7798 | struct iw_request_info *info, |
7799 | union iwreq_data *wrqu, char *) |
7800 | { |
7801 | struct ipw2100_priv *priv = libipw_priv(dev); |
7802 | if (priv->status & STATUS_INITIALIZED) |
7803 | schedule_reset(priv); |
7804 | return 0; |
7805 | } |
7806 | |
7807 | #endif |
7808 | |
7809 | static int ipw2100_wx_set_powermode(struct net_device *dev, |
7810 | struct iw_request_info *info, |
7811 | union iwreq_data *wrqu, char *) |
7812 | { |
7813 | struct ipw2100_priv *priv = libipw_priv(dev); |
7814 | int err = 0, mode = *(int *)extra; |
7815 | |
7816 | mutex_lock(&priv->action_mutex); |
7817 | if (!(priv->status & STATUS_INITIALIZED)) { |
7818 | err = -EIO; |
7819 | goto done; |
7820 | } |
7821 | |
7822 | if ((mode < 0) || (mode > POWER_MODES)) |
7823 | mode = IPW_POWER_AUTO; |
7824 | |
7825 | if (IPW_POWER_LEVEL(priv->power_mode) != mode) |
7826 | err = ipw2100_set_power_mode(priv, power_level: mode); |
7827 | done: |
7828 | mutex_unlock(lock: &priv->action_mutex); |
7829 | return err; |
7830 | } |
7831 | |
7832 | #define MAX_POWER_STRING 80 |
7833 | static int ipw2100_wx_get_powermode(struct net_device *dev, |
7834 | struct iw_request_info *info, |
7835 | union iwreq_data *wrqu, char *) |
7836 | { |
7837 | /* |
7838 | * This can be called at any time. No action lock required |
7839 | */ |
7840 | |
7841 | struct ipw2100_priv *priv = libipw_priv(dev); |
7842 | int level = IPW_POWER_LEVEL(priv->power_mode); |
7843 | s32 timeout, period; |
7844 | |
7845 | if (!(priv->power_mode & IPW_POWER_ENABLED)) { |
7846 | snprintf(buf: extra, MAX_POWER_STRING, |
7847 | fmt: "Power save level: %d (Off)" , level); |
7848 | } else { |
7849 | switch (level) { |
7850 | case IPW_POWER_MODE_CAM: |
7851 | snprintf(buf: extra, MAX_POWER_STRING, |
7852 | fmt: "Power save level: %d (None)" , level); |
7853 | break; |
7854 | case IPW_POWER_AUTO: |
7855 | snprintf(buf: extra, MAX_POWER_STRING, |
7856 | fmt: "Power save level: %d (Auto)" , level); |
7857 | break; |
7858 | default: |
7859 | timeout = timeout_duration[level - 1] / 1000; |
7860 | period = period_duration[level - 1] / 1000; |
7861 | snprintf(buf: extra, MAX_POWER_STRING, |
7862 | fmt: "Power save level: %d " |
7863 | "(Timeout %dms, Period %dms)" , |
7864 | level, timeout, period); |
7865 | } |
7866 | } |
7867 | |
7868 | wrqu->data.length = strlen(extra) + 1; |
7869 | |
7870 | return 0; |
7871 | } |
7872 | |
7873 | static int ipw2100_wx_set_preamble(struct net_device *dev, |
7874 | struct iw_request_info *info, |
7875 | union iwreq_data *wrqu, char *) |
7876 | { |
7877 | struct ipw2100_priv *priv = libipw_priv(dev); |
7878 | int err, mode = *(int *)extra; |
7879 | |
7880 | mutex_lock(&priv->action_mutex); |
7881 | if (!(priv->status & STATUS_INITIALIZED)) { |
7882 | err = -EIO; |
7883 | goto done; |
7884 | } |
7885 | |
7886 | if (mode == 1) |
7887 | priv->config |= CFG_LONG_PREAMBLE; |
7888 | else if (mode == 0) |
7889 | priv->config &= ~CFG_LONG_PREAMBLE; |
7890 | else { |
7891 | err = -EINVAL; |
7892 | goto done; |
7893 | } |
7894 | |
7895 | err = ipw2100_system_config(priv, batch_mode: 0); |
7896 | |
7897 | done: |
7898 | mutex_unlock(lock: &priv->action_mutex); |
7899 | return err; |
7900 | } |
7901 | |
7902 | static int ipw2100_wx_get_preamble(struct net_device *dev, |
7903 | struct iw_request_info *info, |
7904 | union iwreq_data *wrqu, char *) |
7905 | { |
7906 | /* |
7907 | * This can be called at any time. No action lock required |
7908 | */ |
7909 | |
7910 | struct ipw2100_priv *priv = libipw_priv(dev); |
7911 | |
7912 | if (priv->config & CFG_LONG_PREAMBLE) |
7913 | snprintf(buf: wrqu->name, IFNAMSIZ, fmt: "long (1)" ); |
7914 | else |
7915 | snprintf(buf: wrqu->name, IFNAMSIZ, fmt: "auto (0)" ); |
7916 | |
7917 | return 0; |
7918 | } |
7919 | |
7920 | #ifdef CONFIG_IPW2100_MONITOR |
7921 | static int ipw2100_wx_set_crc_check(struct net_device *dev, |
7922 | struct iw_request_info *info, |
7923 | union iwreq_data *wrqu, char *) |
7924 | { |
7925 | struct ipw2100_priv *priv = libipw_priv(dev); |
7926 | int err, mode = *(int *)extra; |
7927 | |
7928 | mutex_lock(&priv->action_mutex); |
7929 | if (!(priv->status & STATUS_INITIALIZED)) { |
7930 | err = -EIO; |
7931 | goto done; |
7932 | } |
7933 | |
7934 | if (mode == 1) |
7935 | priv->config |= CFG_CRC_CHECK; |
7936 | else if (mode == 0) |
7937 | priv->config &= ~CFG_CRC_CHECK; |
7938 | else { |
7939 | err = -EINVAL; |
7940 | goto done; |
7941 | } |
7942 | err = 0; |
7943 | |
7944 | done: |
7945 | mutex_unlock(lock: &priv->action_mutex); |
7946 | return err; |
7947 | } |
7948 | |
7949 | static int ipw2100_wx_get_crc_check(struct net_device *dev, |
7950 | struct iw_request_info *info, |
7951 | union iwreq_data *wrqu, char *) |
7952 | { |
7953 | /* |
7954 | * This can be called at any time. No action lock required |
7955 | */ |
7956 | |
7957 | struct ipw2100_priv *priv = libipw_priv(dev); |
7958 | |
7959 | if (priv->config & CFG_CRC_CHECK) |
7960 | snprintf(buf: wrqu->name, IFNAMSIZ, fmt: "CRC checked (1)" ); |
7961 | else |
7962 | snprintf(buf: wrqu->name, IFNAMSIZ, fmt: "CRC ignored (0)" ); |
7963 | |
7964 | return 0; |
7965 | } |
7966 | #endif /* CONFIG_IPW2100_MONITOR */ |
7967 | |
7968 | static iw_handler ipw2100_wx_handlers[] = { |
7969 | IW_HANDLER(SIOCGIWNAME, ipw2100_wx_get_name), |
7970 | IW_HANDLER(SIOCSIWFREQ, ipw2100_wx_set_freq), |
7971 | IW_HANDLER(SIOCGIWFREQ, ipw2100_wx_get_freq), |
7972 | IW_HANDLER(SIOCSIWMODE, ipw2100_wx_set_mode), |
7973 | IW_HANDLER(SIOCGIWMODE, ipw2100_wx_get_mode), |
7974 | IW_HANDLER(SIOCGIWRANGE, ipw2100_wx_get_range), |
7975 | IW_HANDLER(SIOCSIWAP, ipw2100_wx_set_wap), |
7976 | IW_HANDLER(SIOCGIWAP, ipw2100_wx_get_wap), |
7977 | IW_HANDLER(SIOCSIWMLME, ipw2100_wx_set_mlme), |
7978 | IW_HANDLER(SIOCSIWSCAN, ipw2100_wx_set_scan), |
7979 | IW_HANDLER(SIOCGIWSCAN, ipw2100_wx_get_scan), |
7980 | IW_HANDLER(SIOCSIWESSID, ipw2100_wx_set_essid), |
7981 | IW_HANDLER(SIOCGIWESSID, ipw2100_wx_get_essid), |
7982 | IW_HANDLER(SIOCSIWNICKN, ipw2100_wx_set_nick), |
7983 | IW_HANDLER(SIOCGIWNICKN, ipw2100_wx_get_nick), |
7984 | IW_HANDLER(SIOCSIWRATE, ipw2100_wx_set_rate), |
7985 | IW_HANDLER(SIOCGIWRATE, ipw2100_wx_get_rate), |
7986 | IW_HANDLER(SIOCSIWRTS, ipw2100_wx_set_rts), |
7987 | IW_HANDLER(SIOCGIWRTS, ipw2100_wx_get_rts), |
7988 | IW_HANDLER(SIOCSIWFRAG, ipw2100_wx_set_frag), |
7989 | IW_HANDLER(SIOCGIWFRAG, ipw2100_wx_get_frag), |
7990 | IW_HANDLER(SIOCSIWTXPOW, ipw2100_wx_set_txpow), |
7991 | IW_HANDLER(SIOCGIWTXPOW, ipw2100_wx_get_txpow), |
7992 | IW_HANDLER(SIOCSIWRETRY, ipw2100_wx_set_retry), |
7993 | IW_HANDLER(SIOCGIWRETRY, ipw2100_wx_get_retry), |
7994 | IW_HANDLER(SIOCSIWENCODE, ipw2100_wx_set_encode), |
7995 | IW_HANDLER(SIOCGIWENCODE, ipw2100_wx_get_encode), |
7996 | IW_HANDLER(SIOCSIWPOWER, ipw2100_wx_set_power), |
7997 | IW_HANDLER(SIOCGIWPOWER, ipw2100_wx_get_power), |
7998 | IW_HANDLER(SIOCSIWGENIE, ipw2100_wx_set_genie), |
7999 | IW_HANDLER(SIOCGIWGENIE, ipw2100_wx_get_genie), |
8000 | IW_HANDLER(SIOCSIWAUTH, ipw2100_wx_set_auth), |
8001 | IW_HANDLER(SIOCGIWAUTH, ipw2100_wx_get_auth), |
8002 | IW_HANDLER(SIOCSIWENCODEEXT, ipw2100_wx_set_encodeext), |
8003 | IW_HANDLER(SIOCGIWENCODEEXT, ipw2100_wx_get_encodeext), |
8004 | }; |
8005 | |
8006 | #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV |
8007 | #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1 |
8008 | #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2 |
8009 | #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3 |
8010 | #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4 |
8011 | #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5 |
8012 | #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6 |
8013 | #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7 |
8014 | |
8015 | static const struct iw_priv_args ipw2100_private_args[] = { |
8016 | |
8017 | #ifdef CONFIG_IPW2100_MONITOR |
8018 | { |
8019 | IPW2100_PRIV_SET_MONITOR, |
8020 | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor" }, |
8021 | { |
8022 | IPW2100_PRIV_RESET, |
8023 | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset" }, |
8024 | #endif /* CONFIG_IPW2100_MONITOR */ |
8025 | |
8026 | { |
8027 | IPW2100_PRIV_SET_POWER, |
8028 | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power" }, |
8029 | { |
8030 | IPW2100_PRIV_GET_POWER, |
8031 | 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, |
8032 | "get_power" }, |
8033 | { |
8034 | IPW2100_PRIV_SET_LONGPREAMBLE, |
8035 | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble" }, |
8036 | { |
8037 | IPW2100_PRIV_GET_LONGPREAMBLE, |
8038 | 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble" }, |
8039 | #ifdef CONFIG_IPW2100_MONITOR |
8040 | { |
8041 | IPW2100_PRIV_SET_CRC_CHECK, |
8042 | IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check" }, |
8043 | { |
8044 | IPW2100_PRIV_GET_CRC_CHECK, |
8045 | 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check" }, |
8046 | #endif /* CONFIG_IPW2100_MONITOR */ |
8047 | }; |
8048 | |
8049 | static iw_handler ipw2100_private_handler[] = { |
8050 | #ifdef CONFIG_IPW2100_MONITOR |
8051 | ipw2100_wx_set_promisc, |
8052 | ipw2100_wx_reset, |
8053 | #else /* CONFIG_IPW2100_MONITOR */ |
8054 | NULL, |
8055 | NULL, |
8056 | #endif /* CONFIG_IPW2100_MONITOR */ |
8057 | ipw2100_wx_set_powermode, |
8058 | ipw2100_wx_get_powermode, |
8059 | ipw2100_wx_set_preamble, |
8060 | ipw2100_wx_get_preamble, |
8061 | #ifdef CONFIG_IPW2100_MONITOR |
8062 | ipw2100_wx_set_crc_check, |
8063 | ipw2100_wx_get_crc_check, |
8064 | #else /* CONFIG_IPW2100_MONITOR */ |
8065 | NULL, |
8066 | NULL, |
8067 | #endif /* CONFIG_IPW2100_MONITOR */ |
8068 | }; |
8069 | |
8070 | /* |
8071 | * Get wireless statistics. |
8072 | * Called by /proc/net/wireless |
8073 | * Also called by SIOCGIWSTATS |
8074 | */ |
8075 | static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev) |
8076 | { |
8077 | enum { |
8078 | POOR = 30, |
8079 | FAIR = 60, |
8080 | GOOD = 80, |
8081 | VERY_GOOD = 90, |
8082 | EXCELLENT = 95, |
8083 | PERFECT = 100 |
8084 | }; |
8085 | int ; |
8086 | int tx_qual; |
8087 | int beacon_qual; |
8088 | int quality; |
8089 | |
8090 | struct ipw2100_priv *priv = libipw_priv(dev); |
8091 | struct iw_statistics *wstats; |
8092 | u32 , tx_retries, missed_beacons, tx_failures; |
8093 | u32 ord_len = sizeof(u32); |
8094 | |
8095 | if (!priv) |
8096 | return (struct iw_statistics *)NULL; |
8097 | |
8098 | wstats = &priv->wstats; |
8099 | |
8100 | /* if hw is disabled, then ipw2100_get_ordinal() can't be called. |
8101 | * ipw2100_wx_wireless_stats seems to be called before fw is |
8102 | * initialized. STATUS_ASSOCIATED will only be set if the hw is up |
8103 | * and associated; if not associcated, the values are all meaningless |
8104 | * anyway, so set them all to NULL and INVALID */ |
8105 | if (!(priv->status & STATUS_ASSOCIATED)) { |
8106 | wstats->miss.beacon = 0; |
8107 | wstats->discard.retries = 0; |
8108 | wstats->qual.qual = 0; |
8109 | wstats->qual.level = 0; |
8110 | wstats->qual.noise = 0; |
8111 | wstats->qual.updated = 7; |
8112 | wstats->qual.updated |= IW_QUAL_NOISE_INVALID | |
8113 | IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID; |
8114 | return wstats; |
8115 | } |
8116 | |
8117 | if (ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_PERCENT_MISSED_BCNS, |
8118 | val: &missed_beacons, len: &ord_len)) |
8119 | goto fail_get_ordinal; |
8120 | |
8121 | /* If we don't have a connection the quality and level is 0 */ |
8122 | if (!(priv->status & STATUS_ASSOCIATED)) { |
8123 | wstats->qual.qual = 0; |
8124 | wstats->qual.level = 0; |
8125 | } else { |
8126 | if (ipw2100_get_ordinal(priv, ord: IPW_ORD_RSSI_AVG_CURR, |
8127 | val: &rssi, len: &ord_len)) |
8128 | goto fail_get_ordinal; |
8129 | wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
8130 | if (rssi < 10) |
8131 | rssi_qual = rssi * POOR / 10; |
8132 | else if (rssi < 15) |
8133 | rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR; |
8134 | else if (rssi < 20) |
8135 | rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR; |
8136 | else if (rssi < 30) |
8137 | rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) / |
8138 | 10 + GOOD; |
8139 | else |
8140 | rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) / |
8141 | 10 + VERY_GOOD; |
8142 | |
8143 | if (ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_PERCENT_RETRIES, |
8144 | val: &tx_retries, len: &ord_len)) |
8145 | goto fail_get_ordinal; |
8146 | |
8147 | if (tx_retries > 75) |
8148 | tx_qual = (90 - tx_retries) * POOR / 15; |
8149 | else if (tx_retries > 70) |
8150 | tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR; |
8151 | else if (tx_retries > 65) |
8152 | tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR; |
8153 | else if (tx_retries > 50) |
8154 | tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) / |
8155 | 15 + GOOD; |
8156 | else |
8157 | tx_qual = (50 - tx_retries) * |
8158 | (PERFECT - VERY_GOOD) / 50 + VERY_GOOD; |
8159 | |
8160 | if (missed_beacons > 50) |
8161 | beacon_qual = (60 - missed_beacons) * POOR / 10; |
8162 | else if (missed_beacons > 40) |
8163 | beacon_qual = (50 - missed_beacons) * (FAIR - POOR) / |
8164 | 10 + POOR; |
8165 | else if (missed_beacons > 32) |
8166 | beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) / |
8167 | 18 + FAIR; |
8168 | else if (missed_beacons > 20) |
8169 | beacon_qual = (32 - missed_beacons) * |
8170 | (VERY_GOOD - GOOD) / 20 + GOOD; |
8171 | else |
8172 | beacon_qual = (20 - missed_beacons) * |
8173 | (PERFECT - VERY_GOOD) / 20 + VERY_GOOD; |
8174 | |
8175 | quality = min(tx_qual, rssi_qual); |
8176 | quality = min(beacon_qual, quality); |
8177 | |
8178 | #ifdef CONFIG_IPW2100_DEBUG |
8179 | if (beacon_qual == quality) |
8180 | IPW_DEBUG_WX("Quality clamped by Missed Beacons\n" ); |
8181 | else if (tx_qual == quality) |
8182 | IPW_DEBUG_WX("Quality clamped by Tx Retries\n" ); |
8183 | else if (quality != 100) |
8184 | IPW_DEBUG_WX("Quality clamped by Signal Strength\n" ); |
8185 | else |
8186 | IPW_DEBUG_WX("Quality not clamped.\n" ); |
8187 | #endif |
8188 | |
8189 | wstats->qual.qual = quality; |
8190 | wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM; |
8191 | } |
8192 | |
8193 | wstats->qual.noise = 0; |
8194 | wstats->qual.updated = 7; |
8195 | wstats->qual.updated |= IW_QUAL_NOISE_INVALID; |
8196 | |
8197 | /* FIXME: this is percent and not a # */ |
8198 | wstats->miss.beacon = missed_beacons; |
8199 | |
8200 | if (ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_TX_FAILURES, |
8201 | val: &tx_failures, len: &ord_len)) |
8202 | goto fail_get_ordinal; |
8203 | wstats->discard.retries = tx_failures; |
8204 | |
8205 | return wstats; |
8206 | |
8207 | fail_get_ordinal: |
8208 | IPW_DEBUG_WX("failed querying ordinals.\n" ); |
8209 | |
8210 | return (struct iw_statistics *)NULL; |
8211 | } |
8212 | |
8213 | static const struct iw_handler_def ipw2100_wx_handler_def = { |
8214 | .standard = ipw2100_wx_handlers, |
8215 | .num_standard = ARRAY_SIZE(ipw2100_wx_handlers), |
8216 | .num_private = ARRAY_SIZE(ipw2100_private_handler), |
8217 | .num_private_args = ARRAY_SIZE(ipw2100_private_args), |
8218 | .private = (iw_handler *) ipw2100_private_handler, |
8219 | .private_args = (struct iw_priv_args *)ipw2100_private_args, |
8220 | .get_wireless_stats = ipw2100_wx_wireless_stats, |
8221 | }; |
8222 | |
8223 | static void ipw2100_wx_event_work(struct work_struct *work) |
8224 | { |
8225 | struct ipw2100_priv *priv = |
8226 | container_of(work, struct ipw2100_priv, wx_event_work.work); |
8227 | union iwreq_data wrqu; |
8228 | unsigned int len = ETH_ALEN; |
8229 | |
8230 | if (priv->status & STATUS_STOPPING) |
8231 | return; |
8232 | |
8233 | mutex_lock(&priv->action_mutex); |
8234 | |
8235 | IPW_DEBUG_WX("enter\n" ); |
8236 | |
8237 | mutex_unlock(lock: &priv->action_mutex); |
8238 | |
8239 | wrqu.ap_addr.sa_family = ARPHRD_ETHER; |
8240 | |
8241 | /* Fetch BSSID from the hardware */ |
8242 | if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) || |
8243 | priv->status & STATUS_RF_KILL_MASK || |
8244 | ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_ASSN_AP_BSSID, |
8245 | val: &priv->bssid, len: &len)) { |
8246 | eth_zero_addr(addr: wrqu.ap_addr.sa_data); |
8247 | } else { |
8248 | /* We now have the BSSID, so can finish setting to the full |
8249 | * associated state */ |
8250 | memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN); |
8251 | memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN); |
8252 | priv->status &= ~STATUS_ASSOCIATING; |
8253 | priv->status |= STATUS_ASSOCIATED; |
8254 | netif_carrier_on(dev: priv->net_dev); |
8255 | netif_wake_queue(dev: priv->net_dev); |
8256 | } |
8257 | |
8258 | if (!(priv->status & STATUS_ASSOCIATED)) { |
8259 | IPW_DEBUG_WX("Configuring ESSID\n" ); |
8260 | mutex_lock(&priv->action_mutex); |
8261 | /* This is a disassociation event, so kick the firmware to |
8262 | * look for another AP */ |
8263 | if (priv->config & CFG_STATIC_ESSID) |
8264 | ipw2100_set_essid(priv, essid: priv->essid, length: priv->essid_len, |
8265 | batch_mode: 0); |
8266 | else |
8267 | ipw2100_set_essid(priv, NULL, length: 0, batch_mode: 0); |
8268 | mutex_unlock(lock: &priv->action_mutex); |
8269 | } |
8270 | |
8271 | wireless_send_event(dev: priv->net_dev, SIOCGIWAP, wrqu: &wrqu, NULL); |
8272 | } |
8273 | |
8274 | #define IPW2100_FW_MAJOR_VERSION 1 |
8275 | #define IPW2100_FW_MINOR_VERSION 3 |
8276 | |
8277 | #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8) |
8278 | #define IPW2100_FW_MAJOR(x) (x & 0xff) |
8279 | |
8280 | #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \ |
8281 | IPW2100_FW_MAJOR_VERSION) |
8282 | |
8283 | #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \ |
8284 | "." __stringify(IPW2100_FW_MINOR_VERSION) |
8285 | |
8286 | #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw" |
8287 | |
8288 | /* |
8289 | |
8290 | BINARY FIRMWARE HEADER FORMAT |
8291 | |
8292 | offset length desc |
8293 | 0 2 version |
8294 | 2 2 mode == 0:BSS,1:IBSS,2:MONITOR |
8295 | 4 4 fw_len |
8296 | 8 4 uc_len |
8297 | C fw_len firmware data |
8298 | 12 + fw_len uc_len microcode data |
8299 | |
8300 | */ |
8301 | |
8302 | struct { |
8303 | short ; |
8304 | short ; |
8305 | unsigned int ; |
8306 | unsigned int ; |
8307 | } __packed; |
8308 | |
8309 | static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw) |
8310 | { |
8311 | struct ipw2100_fw_header *h = |
8312 | (struct ipw2100_fw_header *)fw->fw_entry->data; |
8313 | |
8314 | if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) { |
8315 | printk(KERN_WARNING DRV_NAME ": Firmware image not compatible " |
8316 | "(detected version id of %u). " |
8317 | "See Documentation/networking/device_drivers/wifi/intel/ipw2100.rst\n" , |
8318 | h->version); |
8319 | return 1; |
8320 | } |
8321 | |
8322 | fw->version = h->version; |
8323 | fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header); |
8324 | fw->fw.size = h->fw_size; |
8325 | fw->uc.data = fw->fw.data + h->fw_size; |
8326 | fw->uc.size = h->uc_size; |
8327 | |
8328 | return 0; |
8329 | } |
8330 | |
8331 | static int ipw2100_get_firmware(struct ipw2100_priv *priv, |
8332 | struct ipw2100_fw *fw) |
8333 | { |
8334 | char *fw_name; |
8335 | int rc; |
8336 | |
8337 | IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n" , |
8338 | priv->net_dev->name); |
8339 | |
8340 | switch (priv->ieee->iw_mode) { |
8341 | case IW_MODE_ADHOC: |
8342 | fw_name = IPW2100_FW_NAME("-i" ); |
8343 | break; |
8344 | #ifdef CONFIG_IPW2100_MONITOR |
8345 | case IW_MODE_MONITOR: |
8346 | fw_name = IPW2100_FW_NAME("-p" ); |
8347 | break; |
8348 | #endif |
8349 | case IW_MODE_INFRA: |
8350 | default: |
8351 | fw_name = IPW2100_FW_NAME("" ); |
8352 | break; |
8353 | } |
8354 | |
8355 | rc = request_firmware(fw: &fw->fw_entry, name: fw_name, device: &priv->pci_dev->dev); |
8356 | |
8357 | if (rc < 0) { |
8358 | printk(KERN_ERR DRV_NAME ": " |
8359 | "%s: Firmware '%s' not available or load failed.\n" , |
8360 | priv->net_dev->name, fw_name); |
8361 | return rc; |
8362 | } |
8363 | IPW_DEBUG_INFO("firmware data %p size %zd\n" , fw->fw_entry->data, |
8364 | fw->fw_entry->size); |
8365 | |
8366 | ipw2100_mod_firmware_load(fw); |
8367 | |
8368 | return 0; |
8369 | } |
8370 | |
8371 | MODULE_FIRMWARE(IPW2100_FW_NAME("-i" )); |
8372 | #ifdef CONFIG_IPW2100_MONITOR |
8373 | MODULE_FIRMWARE(IPW2100_FW_NAME("-p" )); |
8374 | #endif |
8375 | MODULE_FIRMWARE(IPW2100_FW_NAME("" )); |
8376 | |
8377 | static void ipw2100_release_firmware(struct ipw2100_priv *priv, |
8378 | struct ipw2100_fw *fw) |
8379 | { |
8380 | fw->version = 0; |
8381 | release_firmware(fw: fw->fw_entry); |
8382 | fw->fw_entry = NULL; |
8383 | } |
8384 | |
8385 | static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, |
8386 | size_t max) |
8387 | { |
8388 | char ver[MAX_FW_VERSION_LEN]; |
8389 | u32 len = MAX_FW_VERSION_LEN; |
8390 | u32 tmp; |
8391 | int i; |
8392 | /* firmware version is an ascii string (max len of 14) */ |
8393 | if (ipw2100_get_ordinal(priv, ord: IPW_ORD_STAT_FW_VER_NUM, val: ver, len: &len)) |
8394 | return -EIO; |
8395 | tmp = max; |
8396 | if (len >= max) |
8397 | len = max - 1; |
8398 | for (i = 0; i < len; i++) |
8399 | buf[i] = ver[i]; |
8400 | buf[i] = '\0'; |
8401 | return tmp; |
8402 | } |
8403 | |
8404 | /* |
8405 | * On exit, the firmware will have been freed from the fw list |
8406 | */ |
8407 | static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw) |
8408 | { |
8409 | /* firmware is constructed of N contiguous entries, each entry is |
8410 | * structured as: |
8411 | * |
8412 | * offset sie desc |
8413 | * 0 4 address to write to |
8414 | * 4 2 length of data run |
8415 | * 6 length data |
8416 | */ |
8417 | unsigned int addr; |
8418 | unsigned short len; |
8419 | |
8420 | const unsigned char *firmware_data = fw->fw.data; |
8421 | unsigned int firmware_data_left = fw->fw.size; |
8422 | |
8423 | while (firmware_data_left > 0) { |
8424 | addr = *(u32 *) (firmware_data); |
8425 | firmware_data += 4; |
8426 | firmware_data_left -= 4; |
8427 | |
8428 | len = *(u16 *) (firmware_data); |
8429 | firmware_data += 2; |
8430 | firmware_data_left -= 2; |
8431 | |
8432 | if (len > 32) { |
8433 | printk(KERN_ERR DRV_NAME ": " |
8434 | "Invalid firmware run-length of %d bytes\n" , |
8435 | len); |
8436 | return -EINVAL; |
8437 | } |
8438 | |
8439 | write_nic_memory(dev: priv->net_dev, addr, len, buf: firmware_data); |
8440 | firmware_data += len; |
8441 | firmware_data_left -= len; |
8442 | } |
8443 | |
8444 | return 0; |
8445 | } |
8446 | |
8447 | struct symbol_alive_response { |
8448 | u8 cmd_id; |
8449 | u8 seq_num; |
8450 | u8 ucode_rev; |
8451 | u8 eeprom_valid; |
8452 | u16 valid_flags; |
8453 | u8 IEEE_addr[6]; |
8454 | u16 flags; |
8455 | u16 pcb_rev; |
8456 | u16 clock_settle_time; // 1us LSB |
8457 | u16 powerup_settle_time; // 1us LSB |
8458 | u16 hop_settle_time; // 1us LSB |
8459 | u8 date[3]; // month, day, year |
8460 | u8 time[2]; // hours, minutes |
8461 | u8 ucode_valid; |
8462 | }; |
8463 | |
8464 | static int ipw2100_ucode_download(struct ipw2100_priv *priv, |
8465 | struct ipw2100_fw *fw) |
8466 | { |
8467 | struct net_device *dev = priv->net_dev; |
8468 | const unsigned char *microcode_data = fw->uc.data; |
8469 | unsigned int microcode_data_left = fw->uc.size; |
8470 | void __iomem *reg = priv->ioaddr; |
8471 | |
8472 | struct symbol_alive_response response; |
8473 | int i, j; |
8474 | u8 data; |
8475 | |
8476 | /* Symbol control */ |
8477 | write_nic_word(dev, IPW2100_CONTROL_REG, val: 0x703); |
8478 | readl(addr: reg); |
8479 | write_nic_word(dev, IPW2100_CONTROL_REG, val: 0x707); |
8480 | readl(addr: reg); |
8481 | |
8482 | /* HW config */ |
8483 | write_nic_byte(dev, addr: 0x210014, val: 0x72); /* fifo width =16 */ |
8484 | readl(addr: reg); |
8485 | write_nic_byte(dev, addr: 0x210014, val: 0x72); /* fifo width =16 */ |
8486 | readl(addr: reg); |
8487 | |
8488 | /* EN_CS_ACCESS bit to reset control store pointer */ |
8489 | write_nic_byte(dev, addr: 0x210000, val: 0x40); |
8490 | readl(addr: reg); |
8491 | write_nic_byte(dev, addr: 0x210000, val: 0x0); |
8492 | readl(addr: reg); |
8493 | write_nic_byte(dev, addr: 0x210000, val: 0x40); |
8494 | readl(addr: reg); |
8495 | |
8496 | /* copy microcode from buffer into Symbol */ |
8497 | |
8498 | while (microcode_data_left > 0) { |
8499 | write_nic_byte(dev, addr: 0x210010, val: *microcode_data++); |
8500 | write_nic_byte(dev, addr: 0x210010, val: *microcode_data++); |
8501 | microcode_data_left -= 2; |
8502 | } |
8503 | |
8504 | /* EN_CS_ACCESS bit to reset the control store pointer */ |
8505 | write_nic_byte(dev, addr: 0x210000, val: 0x0); |
8506 | readl(addr: reg); |
8507 | |
8508 | /* Enable System (Reg 0) |
8509 | * first enable causes garbage in RX FIFO */ |
8510 | write_nic_byte(dev, addr: 0x210000, val: 0x0); |
8511 | readl(addr: reg); |
8512 | write_nic_byte(dev, addr: 0x210000, val: 0x80); |
8513 | readl(addr: reg); |
8514 | |
8515 | /* Reset External Baseband Reg */ |
8516 | write_nic_word(dev, IPW2100_CONTROL_REG, val: 0x703); |
8517 | readl(addr: reg); |
8518 | write_nic_word(dev, IPW2100_CONTROL_REG, val: 0x707); |
8519 | readl(addr: reg); |
8520 | |
8521 | /* HW Config (Reg 5) */ |
8522 | write_nic_byte(dev, addr: 0x210014, val: 0x72); // fifo width =16 |
8523 | readl(addr: reg); |
8524 | write_nic_byte(dev, addr: 0x210014, val: 0x72); // fifo width =16 |
8525 | readl(addr: reg); |
8526 | |
8527 | /* Enable System (Reg 0) |
8528 | * second enable should be OK */ |
8529 | write_nic_byte(dev, addr: 0x210000, val: 0x00); // clear enable system |
8530 | readl(addr: reg); |
8531 | write_nic_byte(dev, addr: 0x210000, val: 0x80); // set enable system |
8532 | |
8533 | /* check Symbol is enabled - upped this from 5 as it wasn't always |
8534 | * catching the update */ |
8535 | for (i = 0; i < 10; i++) { |
8536 | udelay(10); |
8537 | |
8538 | /* check Dino is enabled bit */ |
8539 | read_nic_byte(dev, addr: 0x210000, val: &data); |
8540 | if (data & 0x1) |
8541 | break; |
8542 | } |
8543 | |
8544 | if (i == 10) { |
8545 | printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n" , |
8546 | dev->name); |
8547 | return -EIO; |
8548 | } |
8549 | |
8550 | /* Get Symbol alive response */ |
8551 | for (i = 0; i < 30; i++) { |
8552 | /* Read alive response structure */ |
8553 | for (j = 0; |
8554 | j < (sizeof(struct symbol_alive_response) >> 1); j++) |
8555 | read_nic_word(dev, addr: 0x210004, val: ((u16 *) & response) + j); |
8556 | |
8557 | if ((response.cmd_id == 1) && (response.ucode_valid == 0x1)) |
8558 | break; |
8559 | udelay(10); |
8560 | } |
8561 | |
8562 | if (i == 30) { |
8563 | printk(KERN_ERR DRV_NAME |
8564 | ": %s: No response from Symbol - hw not alive\n" , |
8565 | dev->name); |
8566 | printk_buf(IPW_DL_ERROR, data: (u8 *) & response, len: sizeof(response)); |
8567 | return -EIO; |
8568 | } |
8569 | |
8570 | return 0; |
8571 | } |
8572 | |