1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * WAX Device Driver
4 *
5 * (c) Copyright 2000 The Puffin Group Inc.
6 *
7 * (c) 2000-2023 by Helge Deller <deller@gmx.de>
8 */
9
10#include <linux/errno.h>
11#include <linux/init.h>
12#include <linux/interrupt.h>
13#include <linux/ioport.h>
14#include <linux/slab.h>
15#include <linux/module.h>
16#include <linux/types.h>
17
18#include <asm/io.h>
19#include <asm/hardware.h>
20
21#include "gsc.h"
22
23#define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */
24
25static void wax_choose_irq(struct parisc_device *dev, void *ctrl)
26{
27 int irq;
28
29 switch (dev->id.sversion) {
30 case 0x73: irq = 1; break; /* i8042 General */
31 case 0x8c: irq = 6; break; /* Serial */
32 case 0x90: irq = 10; break; /* EISA */
33 default: return; /* Unknown */
34 }
35
36 gsc_asic_assign_irq(asic: ctrl, local_irq: irq, irqp: &dev->irq);
37
38 switch (dev->id.sversion) {
39 case 0x73: irq = 2; break; /* i8042 High-priority */
40 case 0x90: irq = 0; break; /* EISA NMI */
41 default: return; /* No secondary IRQ */
42 }
43
44 gsc_asic_assign_irq(asic: ctrl, local_irq: irq, irqp: &dev->aux_irq);
45}
46
47static void __init
48wax_init_irq(struct gsc_asic *wax)
49{
50 unsigned long base = wax->hpa;
51
52 /* Wax-off */
53 gsc_writel(0x00000000, base+OFFSET_IMR);
54
55 /* clear pending interrupts */
56 gsc_readl(base+OFFSET_IRR);
57
58 /* We're not really convinced we want to reset the onboard
59 * devices. Firmware does it for us...
60 */
61
62 /* Resets */
63// gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */
64// gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */
65}
66
67static int __init wax_init_chip(struct parisc_device *dev)
68{
69 struct gsc_asic *wax;
70 struct parisc_device *parent;
71 int ret;
72
73 wax = kzalloc(size: sizeof(*wax), GFP_KERNEL);
74 if (!wax)
75 return -ENOMEM;
76
77 wax->name = "wax";
78 wax->hpa = dev->hpa.start;
79
80 wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */
81 printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
82
83 /* Stop wax hissing for a bit */
84 wax_init_irq(wax);
85
86 /* the IRQ wax should use */
87 dev->irq = gsc_claim_irq(dev: &wax->gsc_irq, WAX_GSC_IRQ);
88 if (dev->irq < 0) {
89 printk(KERN_ERR "%s(): cannot get GSC irq\n",
90 __func__);
91 kfree(objp: wax);
92 return -EBUSY;
93 }
94
95 wax->eim = ((u32) wax->gsc_irq.txn_addr) | wax->gsc_irq.txn_data;
96
97 ret = request_irq(irq: wax->gsc_irq.irq, handler: gsc_asic_intr, flags: 0, name: "wax", dev: wax);
98 if (ret < 0) {
99 kfree(objp: wax);
100 return ret;
101 }
102
103 /* enable IRQ's for devices below WAX */
104 gsc_writel(wax->eim, wax->hpa + OFFSET_IAR);
105
106 /* Done init'ing, register this driver */
107 ret = gsc_common_setup(parent: dev, gsc_asic: wax);
108 if (ret) {
109 kfree(objp: wax);
110 return ret;
111 }
112
113 gsc_fixup_irqs(parent: dev, ctrl: wax, choose: wax_choose_irq);
114 /* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */
115 parent = parisc_parent(dev);
116 if (parent->id.hw_type != HPHW_IOA) {
117 gsc_fixup_irqs(parent, ctrl: wax, choose: wax_choose_irq);
118 }
119
120 return ret;
121}
122
123static const struct parisc_device_id wax_tbl[] __initconst = {
124 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e },
125 { 0, }
126};
127
128MODULE_DEVICE_TABLE(parisc, wax_tbl);
129
130static struct parisc_driver wax_driver __refdata = {
131 .name = "wax",
132 .id_table = wax_tbl,
133 .probe = wax_init_chip,
134};
135
136static int __init wax_init(void)
137{
138 return register_parisc_driver(&wax_driver);
139}
140arch_initcall(wax_init);
141

source code of linux/drivers/parisc/wax.c