1 | /******************************************************************* |
2 | * This file is part of the Emulex Linux Device Driver for * |
3 | * Fibre Channel Host Bus Adapters. * |
4 | * Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term * |
5 | * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * |
6 | * Copyright (C) 2004-2016 Emulex. All rights reserved. * |
7 | * EMULEX and SLI are trademarks of Emulex. * |
8 | * www.broadcom.com * |
9 | * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
10 | * * |
11 | * This program is free software; you can redistribute it and/or * |
12 | * modify it under the terms of version 2 of the GNU General * |
13 | * Public License as published by the Free Software Foundation. * |
14 | * This program is distributed in the hope that it will be useful. * |
15 | * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
16 | * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
17 | * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
18 | * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
19 | * TO BE LEGALLY INVALID. See the GNU General Public License for * |
20 | * more details, a copy of which can be found in the file COPYING * |
21 | * included with this package. * |
22 | *******************************************************************/ |
23 | |
24 | #include <linux/blkdev.h> |
25 | #include <linux/delay.h> |
26 | #include <linux/dma-mapping.h> |
27 | #include <linux/idr.h> |
28 | #include <linux/interrupt.h> |
29 | #include <linux/module.h> |
30 | #include <linux/kthread.h> |
31 | #include <linux/pci.h> |
32 | #include <linux/spinlock.h> |
33 | #include <linux/sched/clock.h> |
34 | #include <linux/ctype.h> |
35 | #include <linux/slab.h> |
36 | #include <linux/firmware.h> |
37 | #include <linux/miscdevice.h> |
38 | #include <linux/percpu.h> |
39 | #include <linux/irq.h> |
40 | #include <linux/bitops.h> |
41 | #include <linux/crash_dump.h> |
42 | #include <linux/cpu.h> |
43 | #include <linux/cpuhotplug.h> |
44 | |
45 | #include <scsi/scsi.h> |
46 | #include <scsi/scsi_device.h> |
47 | #include <scsi/scsi_host.h> |
48 | #include <scsi/scsi_transport_fc.h> |
49 | #include <scsi/scsi_tcq.h> |
50 | #include <scsi/fc/fc_fs.h> |
51 | |
52 | #include "lpfc_hw4.h" |
53 | #include "lpfc_hw.h" |
54 | #include "lpfc_sli.h" |
55 | #include "lpfc_sli4.h" |
56 | #include "lpfc_nl.h" |
57 | #include "lpfc_disc.h" |
58 | #include "lpfc.h" |
59 | #include "lpfc_scsi.h" |
60 | #include "lpfc_nvme.h" |
61 | #include "lpfc_logmsg.h" |
62 | #include "lpfc_crtn.h" |
63 | #include "lpfc_vport.h" |
64 | #include "lpfc_version.h" |
65 | #include "lpfc_ids.h" |
66 | |
67 | static enum cpuhp_state lpfc_cpuhp_state; |
68 | /* Used when mapping IRQ vectors in a driver centric manner */ |
69 | static uint32_t lpfc_present_cpu; |
70 | static bool lpfc_pldv_detect; |
71 | |
72 | static void __lpfc_cpuhp_remove(struct lpfc_hba *phba); |
73 | static void lpfc_cpuhp_remove(struct lpfc_hba *phba); |
74 | static void lpfc_cpuhp_add(struct lpfc_hba *phba); |
75 | static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); |
76 | static int lpfc_post_rcv_buf(struct lpfc_hba *); |
77 | static int lpfc_sli4_queue_verify(struct lpfc_hba *); |
78 | static int lpfc_create_bootstrap_mbox(struct lpfc_hba *); |
79 | static int lpfc_setup_endian_order(struct lpfc_hba *); |
80 | static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *); |
81 | static void lpfc_free_els_sgl_list(struct lpfc_hba *); |
82 | static void lpfc_free_nvmet_sgl_list(struct lpfc_hba *); |
83 | static void lpfc_init_sgl_list(struct lpfc_hba *); |
84 | static int lpfc_init_active_sgl_array(struct lpfc_hba *); |
85 | static void lpfc_free_active_sgl(struct lpfc_hba *); |
86 | static int lpfc_hba_down_post_s3(struct lpfc_hba *phba); |
87 | static int lpfc_hba_down_post_s4(struct lpfc_hba *phba); |
88 | static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *); |
89 | static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *); |
90 | static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *); |
91 | static void lpfc_sli4_disable_intr(struct lpfc_hba *); |
92 | static uint32_t lpfc_sli4_enable_intr(struct lpfc_hba *, uint32_t); |
93 | static void lpfc_sli4_oas_verify(struct lpfc_hba *phba); |
94 | static uint16_t lpfc_find_cpu_handle(struct lpfc_hba *, uint16_t, int); |
95 | static void lpfc_setup_bg(struct lpfc_hba *, struct Scsi_Host *); |
96 | static int lpfc_sli4_cgn_parm_chg_evt(struct lpfc_hba *); |
97 | static void lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba); |
98 | |
99 | static struct scsi_transport_template *lpfc_transport_template = NULL; |
100 | static struct scsi_transport_template *lpfc_vport_transport_template = NULL; |
101 | static DEFINE_IDR(lpfc_hba_index); |
102 | #define LPFC_NVMET_BUF_POST 254 |
103 | static int lpfc_vmid_res_alloc(struct lpfc_hba *phba, struct lpfc_vport *vport); |
104 | static void lpfc_cgn_update_tstamp(struct lpfc_hba *phba, struct lpfc_cgn_ts *ts); |
105 | |
106 | /** |
107 | * lpfc_config_port_prep - Perform lpfc initialization prior to config port |
108 | * @phba: pointer to lpfc hba data structure. |
109 | * |
110 | * This routine will do LPFC initialization prior to issuing the CONFIG_PORT |
111 | * mailbox command. It retrieves the revision information from the HBA and |
112 | * collects the Vital Product Data (VPD) about the HBA for preparing the |
113 | * configuration of the HBA. |
114 | * |
115 | * Return codes: |
116 | * 0 - success. |
117 | * -ERESTART - requests the SLI layer to reset the HBA and try again. |
118 | * Any other value - indicates an error. |
119 | **/ |
120 | int |
121 | lpfc_config_port_prep(struct lpfc_hba *phba) |
122 | { |
123 | lpfc_vpd_t *vp = &phba->vpd; |
124 | int i = 0, rc; |
125 | LPFC_MBOXQ_t *pmb; |
126 | MAILBOX_t *mb; |
127 | char *lpfc_vpd_data = NULL; |
128 | uint16_t offset = 0; |
129 | static char licensed[56] = |
130 | "key unlock for use with gnu public licensed code only\0" ; |
131 | static int init_key = 1; |
132 | |
133 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
134 | if (!pmb) { |
135 | phba->link_state = LPFC_HBA_ERROR; |
136 | return -ENOMEM; |
137 | } |
138 | |
139 | mb = &pmb->u.mb; |
140 | phba->link_state = LPFC_INIT_MBX_CMDS; |
141 | |
142 | if (lpfc_is_LC_HBA(device: phba->pcidev->device)) { |
143 | if (init_key) { |
144 | uint32_t *ptext = (uint32_t *) licensed; |
145 | |
146 | for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) |
147 | *ptext = cpu_to_be32(*ptext); |
148 | init_key = 0; |
149 | } |
150 | |
151 | lpfc_read_nv(phba, pmb); |
152 | memset((char*)mb->un.varRDnvp.rsvd3, 0, |
153 | sizeof (mb->un.varRDnvp.rsvd3)); |
154 | memcpy((char*)mb->un.varRDnvp.rsvd3, licensed, |
155 | sizeof (licensed)); |
156 | |
157 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
158 | |
159 | if (rc != MBX_SUCCESS) { |
160 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
161 | "0324 Config Port initialization " |
162 | "error, mbxCmd x%x READ_NVPARM, " |
163 | "mbxStatus x%x\n" , |
164 | mb->mbxCommand, mb->mbxStatus); |
165 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
166 | return -ERESTART; |
167 | } |
168 | memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename, |
169 | sizeof(phba->wwnn)); |
170 | memcpy(phba->wwpn, (char *)mb->un.varRDnvp.portname, |
171 | sizeof(phba->wwpn)); |
172 | } |
173 | |
174 | /* |
175 | * Clear all option bits except LPFC_SLI3_BG_ENABLED, |
176 | * which was already set in lpfc_get_cfgparam() |
177 | */ |
178 | phba->sli3_options &= (uint32_t)LPFC_SLI3_BG_ENABLED; |
179 | |
180 | /* Setup and issue mailbox READ REV command */ |
181 | lpfc_read_rev(phba, pmb); |
182 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
183 | if (rc != MBX_SUCCESS) { |
184 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
185 | "0439 Adapter failed to init, mbxCmd x%x " |
186 | "READ_REV, mbxStatus x%x\n" , |
187 | mb->mbxCommand, mb->mbxStatus); |
188 | mempool_free( element: pmb, pool: phba->mbox_mem_pool); |
189 | return -ERESTART; |
190 | } |
191 | |
192 | |
193 | /* |
194 | * The value of rr must be 1 since the driver set the cv field to 1. |
195 | * This setting requires the FW to set all revision fields. |
196 | */ |
197 | if (mb->un.varRdRev.rr == 0) { |
198 | vp->rev.rBit = 0; |
199 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
200 | "0440 Adapter failed to init, READ_REV has " |
201 | "missing revision information.\n" ); |
202 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
203 | return -ERESTART; |
204 | } |
205 | |
206 | if (phba->sli_rev == 3 && !mb->un.varRdRev.v3rsp) { |
207 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
208 | return -EINVAL; |
209 | } |
210 | |
211 | /* Save information as VPD data */ |
212 | vp->rev.rBit = 1; |
213 | memcpy(&vp->sli3Feat, &mb->un.varRdRev.sli3Feat, sizeof(uint32_t)); |
214 | vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev; |
215 | memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16); |
216 | vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev; |
217 | memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16); |
218 | vp->rev.biuRev = mb->un.varRdRev.biuRev; |
219 | vp->rev.smRev = mb->un.varRdRev.smRev; |
220 | vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev; |
221 | vp->rev.endecRev = mb->un.varRdRev.endecRev; |
222 | vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh; |
223 | vp->rev.fcphLow = mb->un.varRdRev.fcphLow; |
224 | vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh; |
225 | vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow; |
226 | vp->rev.postKernRev = mb->un.varRdRev.postKernRev; |
227 | vp->rev.opFwRev = mb->un.varRdRev.opFwRev; |
228 | |
229 | /* If the sli feature level is less then 9, we must |
230 | * tear down all RPIs and VPIs on link down if NPIV |
231 | * is enabled. |
232 | */ |
233 | if (vp->rev.feaLevelHigh < 9) |
234 | phba->sli3_options |= LPFC_SLI3_VPORT_TEARDOWN; |
235 | |
236 | if (lpfc_is_LC_HBA(device: phba->pcidev->device)) |
237 | memcpy(phba->RandomData, (char *)&mb->un.varWords[24], |
238 | sizeof (phba->RandomData)); |
239 | |
240 | /* Get adapter VPD information */ |
241 | lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); |
242 | if (!lpfc_vpd_data) |
243 | goto out_free_mbox; |
244 | do { |
245 | lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD); |
246 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
247 | |
248 | if (rc != MBX_SUCCESS) { |
249 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
250 | "0441 VPD not present on adapter, " |
251 | "mbxCmd x%x DUMP VPD, mbxStatus x%x\n" , |
252 | mb->mbxCommand, mb->mbxStatus); |
253 | mb->un.varDmp.word_cnt = 0; |
254 | } |
255 | /* dump mem may return a zero when finished or we got a |
256 | * mailbox error, either way we are done. |
257 | */ |
258 | if (mb->un.varDmp.word_cnt == 0) |
259 | break; |
260 | |
261 | if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset) |
262 | mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset; |
263 | lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET, |
264 | lpfc_vpd_data + offset, |
265 | mb->un.varDmp.word_cnt); |
266 | offset += mb->un.varDmp.word_cnt; |
267 | } while (mb->un.varDmp.word_cnt && offset < DMP_VPD_SIZE); |
268 | |
269 | lpfc_parse_vpd(phba, lpfc_vpd_data, offset); |
270 | |
271 | kfree(objp: lpfc_vpd_data); |
272 | out_free_mbox: |
273 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
274 | return 0; |
275 | } |
276 | |
277 | /** |
278 | * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd |
279 | * @phba: pointer to lpfc hba data structure. |
280 | * @pmboxq: pointer to the driver internal queue element for mailbox command. |
281 | * |
282 | * This is the completion handler for driver's configuring asynchronous event |
283 | * mailbox command to the device. If the mailbox command returns successfully, |
284 | * it will set internal async event support flag to 1; otherwise, it will |
285 | * set internal async event support flag to 0. |
286 | **/ |
287 | static void |
288 | lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) |
289 | { |
290 | if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) |
291 | phba->temp_sensor_support = 1; |
292 | else |
293 | phba->temp_sensor_support = 0; |
294 | mempool_free(element: pmboxq, pool: phba->mbox_mem_pool); |
295 | return; |
296 | } |
297 | |
298 | /** |
299 | * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler |
300 | * @phba: pointer to lpfc hba data structure. |
301 | * @pmboxq: pointer to the driver internal queue element for mailbox command. |
302 | * |
303 | * This is the completion handler for dump mailbox command for getting |
304 | * wake up parameters. When this command complete, the response contain |
305 | * Option rom version of the HBA. This function translate the version number |
306 | * into a human readable string and store it in OptionROMVersion. |
307 | **/ |
308 | static void |
309 | lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) |
310 | { |
311 | struct prog_id *prg; |
312 | uint32_t prog_id_word; |
313 | char dist = ' '; |
314 | /* character array used for decoding dist type. */ |
315 | char dist_char[] = "nabx" ; |
316 | |
317 | if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) { |
318 | mempool_free(element: pmboxq, pool: phba->mbox_mem_pool); |
319 | return; |
320 | } |
321 | |
322 | prg = (struct prog_id *) &prog_id_word; |
323 | |
324 | /* word 7 contain option rom version */ |
325 | prog_id_word = pmboxq->u.mb.un.varWords[7]; |
326 | |
327 | /* Decode the Option rom version word to a readable string */ |
328 | dist = dist_char[prg->dist]; |
329 | |
330 | if ((prg->dist == 3) && (prg->num == 0)) |
331 | snprintf(buf: phba->OptionROMVersion, size: 32, fmt: "%d.%d%d" , |
332 | prg->ver, prg->rev, prg->lev); |
333 | else |
334 | snprintf(buf: phba->OptionROMVersion, size: 32, fmt: "%d.%d%d%c%d" , |
335 | prg->ver, prg->rev, prg->lev, |
336 | dist, prg->num); |
337 | mempool_free(element: pmboxq, pool: phba->mbox_mem_pool); |
338 | return; |
339 | } |
340 | |
341 | /** |
342 | * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname, |
343 | * @vport: pointer to lpfc vport data structure. |
344 | * |
345 | * |
346 | * Return codes |
347 | * None. |
348 | **/ |
349 | void |
350 | lpfc_update_vport_wwn(struct lpfc_vport *vport) |
351 | { |
352 | struct lpfc_hba *phba = vport->phba; |
353 | |
354 | /* |
355 | * If the name is empty or there exists a soft name |
356 | * then copy the service params name, otherwise use the fc name |
357 | */ |
358 | if (vport->fc_nodename.u.wwn[0] == 0) |
359 | memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, |
360 | sizeof(struct lpfc_name)); |
361 | else |
362 | memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename, |
363 | sizeof(struct lpfc_name)); |
364 | |
365 | /* |
366 | * If the port name has changed, then set the Param changes flag |
367 | * to unreg the login |
368 | */ |
369 | if (vport->fc_portname.u.wwn[0] != 0 && |
370 | memcmp(p: &vport->fc_portname, q: &vport->fc_sparam.portName, |
371 | size: sizeof(struct lpfc_name))) { |
372 | vport->vport_flag |= FAWWPN_PARAM_CHG; |
373 | |
374 | if (phba->sli_rev == LPFC_SLI_REV4 && |
375 | vport->port_type == LPFC_PHYSICAL_PORT && |
376 | phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_FABRIC) { |
377 | if (!(phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG)) |
378 | phba->sli4_hba.fawwpn_flag &= |
379 | ~LPFC_FAWWPN_FABRIC; |
380 | lpfc_printf_log(phba, KERN_INFO, |
381 | LOG_SLI | LOG_DISCOVERY | LOG_ELS, |
382 | "2701 FA-PWWN change WWPN from %llx to " |
383 | "%llx: vflag x%x fawwpn_flag x%x\n" , |
384 | wwn_to_u64(vport->fc_portname.u.wwn), |
385 | wwn_to_u64 |
386 | (vport->fc_sparam.portName.u.wwn), |
387 | vport->vport_flag, |
388 | phba->sli4_hba.fawwpn_flag); |
389 | memcpy(&vport->fc_portname, &vport->fc_sparam.portName, |
390 | sizeof(struct lpfc_name)); |
391 | } |
392 | } |
393 | |
394 | if (vport->fc_portname.u.wwn[0] == 0) |
395 | memcpy(&vport->fc_portname, &vport->fc_sparam.portName, |
396 | sizeof(struct lpfc_name)); |
397 | else |
398 | memcpy(&vport->fc_sparam.portName, &vport->fc_portname, |
399 | sizeof(struct lpfc_name)); |
400 | } |
401 | |
402 | /** |
403 | * lpfc_config_port_post - Perform lpfc initialization after config port |
404 | * @phba: pointer to lpfc hba data structure. |
405 | * |
406 | * This routine will do LPFC initialization after the CONFIG_PORT mailbox |
407 | * command call. It performs all internal resource and state setups on the |
408 | * port: post IOCB buffers, enable appropriate host interrupt attentions, |
409 | * ELS ring timers, etc. |
410 | * |
411 | * Return codes |
412 | * 0 - success. |
413 | * Any other value - error. |
414 | **/ |
415 | int |
416 | lpfc_config_port_post(struct lpfc_hba *phba) |
417 | { |
418 | struct lpfc_vport *vport = phba->pport; |
419 | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); |
420 | LPFC_MBOXQ_t *pmb; |
421 | MAILBOX_t *mb; |
422 | struct lpfc_dmabuf *mp; |
423 | struct lpfc_sli *psli = &phba->sli; |
424 | uint32_t status, timeout; |
425 | int i, j; |
426 | int rc; |
427 | |
428 | spin_lock_irq(lock: &phba->hbalock); |
429 | /* |
430 | * If the Config port completed correctly the HBA is not |
431 | * over heated any more. |
432 | */ |
433 | if (phba->over_temp_state == HBA_OVER_TEMP) |
434 | phba->over_temp_state = HBA_NORMAL_TEMP; |
435 | spin_unlock_irq(lock: &phba->hbalock); |
436 | |
437 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
438 | if (!pmb) { |
439 | phba->link_state = LPFC_HBA_ERROR; |
440 | return -ENOMEM; |
441 | } |
442 | mb = &pmb->u.mb; |
443 | |
444 | /* Get login parameters for NID. */ |
445 | rc = lpfc_read_sparam(phba, pmb, 0); |
446 | if (rc) { |
447 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
448 | return -ENOMEM; |
449 | } |
450 | |
451 | pmb->vport = vport; |
452 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { |
453 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
454 | "0448 Adapter failed init, mbxCmd x%x " |
455 | "READ_SPARM mbxStatus x%x\n" , |
456 | mb->mbxCommand, mb->mbxStatus); |
457 | phba->link_state = LPFC_HBA_ERROR; |
458 | lpfc_mbox_rsrc_cleanup(phba, mbox: pmb, locked: MBOX_THD_UNLOCKED); |
459 | return -EIO; |
460 | } |
461 | |
462 | mp = (struct lpfc_dmabuf *)pmb->ctx_buf; |
463 | |
464 | /* This dmabuf was allocated by lpfc_read_sparam. The dmabuf is no |
465 | * longer needed. Prevent unintended ctx_buf access as the mbox is |
466 | * reused. |
467 | */ |
468 | memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm)); |
469 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
470 | kfree(objp: mp); |
471 | pmb->ctx_buf = NULL; |
472 | lpfc_update_vport_wwn(vport); |
473 | |
474 | /* Update the fc_host data structures with new wwn. */ |
475 | fc_host_node_name(shost) = wwn_to_u64(wwn: vport->fc_nodename.u.wwn); |
476 | fc_host_port_name(shost) = wwn_to_u64(wwn: vport->fc_portname.u.wwn); |
477 | fc_host_max_npiv_vports(shost) = phba->max_vpi; |
478 | |
479 | /* If no serial number in VPD data, use low 6 bytes of WWNN */ |
480 | /* This should be consolidated into parse_vpd ? - mr */ |
481 | if (phba->SerialNumber[0] == 0) { |
482 | uint8_t *outptr; |
483 | |
484 | outptr = &vport->fc_nodename.u.s.IEEE[0]; |
485 | for (i = 0; i < 12; i++) { |
486 | status = *outptr++; |
487 | j = ((status & 0xf0) >> 4); |
488 | if (j <= 9) |
489 | phba->SerialNumber[i] = |
490 | (char)((uint8_t) 0x30 + (uint8_t) j); |
491 | else |
492 | phba->SerialNumber[i] = |
493 | (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); |
494 | i++; |
495 | j = (status & 0xf); |
496 | if (j <= 9) |
497 | phba->SerialNumber[i] = |
498 | (char)((uint8_t) 0x30 + (uint8_t) j); |
499 | else |
500 | phba->SerialNumber[i] = |
501 | (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); |
502 | } |
503 | } |
504 | |
505 | lpfc_read_config(phba, pmb); |
506 | pmb->vport = vport; |
507 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { |
508 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
509 | "0453 Adapter failed to init, mbxCmd x%x " |
510 | "READ_CONFIG, mbxStatus x%x\n" , |
511 | mb->mbxCommand, mb->mbxStatus); |
512 | phba->link_state = LPFC_HBA_ERROR; |
513 | mempool_free( element: pmb, pool: phba->mbox_mem_pool); |
514 | return -EIO; |
515 | } |
516 | |
517 | /* Check if the port is disabled */ |
518 | lpfc_sli_read_link_ste(phba); |
519 | |
520 | /* Reset the DFT_HBA_Q_DEPTH to the max xri */ |
521 | if (phba->cfg_hba_queue_depth > mb->un.varRdConfig.max_xri) { |
522 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
523 | "3359 HBA queue depth changed from %d to %d\n" , |
524 | phba->cfg_hba_queue_depth, |
525 | mb->un.varRdConfig.max_xri); |
526 | phba->cfg_hba_queue_depth = mb->un.varRdConfig.max_xri; |
527 | } |
528 | |
529 | phba->lmt = mb->un.varRdConfig.lmt; |
530 | |
531 | /* Get the default values for Model Name and Description */ |
532 | lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc); |
533 | |
534 | phba->link_state = LPFC_LINK_DOWN; |
535 | |
536 | /* Only process IOCBs on ELS ring till hba_state is READY */ |
537 | if (psli->sli3_ring[LPFC_EXTRA_RING].sli.sli3.cmdringaddr) |
538 | psli->sli3_ring[LPFC_EXTRA_RING].flag |= LPFC_STOP_IOCB_EVENT; |
539 | if (psli->sli3_ring[LPFC_FCP_RING].sli.sli3.cmdringaddr) |
540 | psli->sli3_ring[LPFC_FCP_RING].flag |= LPFC_STOP_IOCB_EVENT; |
541 | |
542 | /* Post receive buffers for desired rings */ |
543 | if (phba->sli_rev != 3) |
544 | lpfc_post_rcv_buf(phba); |
545 | |
546 | /* |
547 | * Configure HBA MSI-X attention conditions to messages if MSI-X mode |
548 | */ |
549 | if (phba->intr_type == MSIX) { |
550 | rc = lpfc_config_msi(phba, pmb); |
551 | if (rc) { |
552 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
553 | return -EIO; |
554 | } |
555 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
556 | if (rc != MBX_SUCCESS) { |
557 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
558 | "0352 Config MSI mailbox command " |
559 | "failed, mbxCmd x%x, mbxStatus x%x\n" , |
560 | pmb->u.mb.mbxCommand, |
561 | pmb->u.mb.mbxStatus); |
562 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
563 | return -EIO; |
564 | } |
565 | } |
566 | |
567 | spin_lock_irq(lock: &phba->hbalock); |
568 | /* Initialize ERATT handling flag */ |
569 | phba->hba_flag &= ~HBA_ERATT_HANDLED; |
570 | |
571 | /* Enable appropriate host interrupts */ |
572 | if (lpfc_readl(addr: phba->HCregaddr, data: &status)) { |
573 | spin_unlock_irq(lock: &phba->hbalock); |
574 | return -EIO; |
575 | } |
576 | status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA; |
577 | if (psli->num_rings > 0) |
578 | status |= HC_R0INT_ENA; |
579 | if (psli->num_rings > 1) |
580 | status |= HC_R1INT_ENA; |
581 | if (psli->num_rings > 2) |
582 | status |= HC_R2INT_ENA; |
583 | if (psli->num_rings > 3) |
584 | status |= HC_R3INT_ENA; |
585 | |
586 | if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && |
587 | (phba->cfg_poll & DISABLE_FCP_RING_INT)) |
588 | status &= ~(HC_R0INT_ENA); |
589 | |
590 | writel(val: status, addr: phba->HCregaddr); |
591 | readl(addr: phba->HCregaddr); /* flush */ |
592 | spin_unlock_irq(lock: &phba->hbalock); |
593 | |
594 | /* Set up ring-0 (ELS) timer */ |
595 | timeout = phba->fc_ratov * 2; |
596 | mod_timer(timer: &vport->els_tmofunc, |
597 | expires: jiffies + msecs_to_jiffies(m: 1000 * timeout)); |
598 | /* Set up heart beat (HB) timer */ |
599 | mod_timer(timer: &phba->hb_tmofunc, |
600 | expires: jiffies + msecs_to_jiffies(m: 1000 * LPFC_HB_MBOX_INTERVAL)); |
601 | phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO); |
602 | phba->last_completion_time = jiffies; |
603 | /* Set up error attention (ERATT) polling timer */ |
604 | mod_timer(timer: &phba->eratt_poll, |
605 | expires: jiffies + msecs_to_jiffies(m: 1000 * phba->eratt_poll_interval)); |
606 | |
607 | if (phba->hba_flag & LINK_DISABLED) { |
608 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
609 | "2598 Adapter Link is disabled.\n" ); |
610 | lpfc_down_link(phba, pmb); |
611 | pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; |
612 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
613 | if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) { |
614 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
615 | "2599 Adapter failed to issue DOWN_LINK" |
616 | " mbox command rc 0x%x\n" , rc); |
617 | |
618 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
619 | return -EIO; |
620 | } |
621 | } else if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK) { |
622 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
623 | rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT); |
624 | if (rc) |
625 | return rc; |
626 | } |
627 | /* MBOX buffer will be freed in mbox compl */ |
628 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
629 | if (!pmb) { |
630 | phba->link_state = LPFC_HBA_ERROR; |
631 | return -ENOMEM; |
632 | } |
633 | |
634 | lpfc_config_async(phba, pmb, LPFC_ELS_RING); |
635 | pmb->mbox_cmpl = lpfc_config_async_cmpl; |
636 | pmb->vport = phba->pport; |
637 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
638 | |
639 | if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { |
640 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
641 | "0456 Adapter failed to issue " |
642 | "ASYNCEVT_ENABLE mbox status x%x\n" , |
643 | rc); |
644 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
645 | } |
646 | |
647 | /* Get Option rom version */ |
648 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
649 | if (!pmb) { |
650 | phba->link_state = LPFC_HBA_ERROR; |
651 | return -ENOMEM; |
652 | } |
653 | |
654 | lpfc_dump_wakeup_param(phba, pmb); |
655 | pmb->mbox_cmpl = lpfc_dump_wakeup_param_cmpl; |
656 | pmb->vport = phba->pport; |
657 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
658 | |
659 | if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { |
660 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
661 | "0435 Adapter failed " |
662 | "to get Option ROM version status x%x\n" , rc); |
663 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
664 | } |
665 | |
666 | return 0; |
667 | } |
668 | |
669 | /** |
670 | * lpfc_sli4_refresh_params - update driver copy of params. |
671 | * @phba: Pointer to HBA context object. |
672 | * |
673 | * This is called to refresh driver copy of dynamic fields from the |
674 | * common_get_sli4_parameters descriptor. |
675 | **/ |
676 | int |
677 | lpfc_sli4_refresh_params(struct lpfc_hba *phba) |
678 | { |
679 | LPFC_MBOXQ_t *mboxq; |
680 | struct lpfc_mqe *mqe; |
681 | struct lpfc_sli4_parameters *mbx_sli4_parameters; |
682 | int length, rc; |
683 | |
684 | mboxq = (LPFC_MBOXQ_t *)mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
685 | if (!mboxq) |
686 | return -ENOMEM; |
687 | |
688 | mqe = &mboxq->u.mqe; |
689 | /* Read the port's SLI4 Config Parameters */ |
690 | length = (sizeof(struct lpfc_mbx_get_sli4_parameters) - |
691 | sizeof(struct lpfc_sli4_cfg_mhdr)); |
692 | lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, |
693 | LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS, |
694 | length, LPFC_SLI4_MBX_EMBED); |
695 | |
696 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
697 | if (unlikely(rc)) { |
698 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
699 | return rc; |
700 | } |
701 | mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters; |
702 | phba->sli4_hba.pc_sli4_params.mi_cap = |
703 | bf_get(cfg_mi_ver, mbx_sli4_parameters); |
704 | |
705 | /* Are we forcing MI off via module parameter? */ |
706 | if (phba->cfg_enable_mi) |
707 | phba->sli4_hba.pc_sli4_params.mi_ver = |
708 | bf_get(cfg_mi_ver, mbx_sli4_parameters); |
709 | else |
710 | phba->sli4_hba.pc_sli4_params.mi_ver = 0; |
711 | |
712 | phba->sli4_hba.pc_sli4_params.cmf = |
713 | bf_get(cfg_cmf, mbx_sli4_parameters); |
714 | phba->sli4_hba.pc_sli4_params.pls = |
715 | bf_get(cfg_pvl, mbx_sli4_parameters); |
716 | |
717 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
718 | return rc; |
719 | } |
720 | |
721 | /** |
722 | * lpfc_hba_init_link - Initialize the FC link |
723 | * @phba: pointer to lpfc hba data structure. |
724 | * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT |
725 | * |
726 | * This routine will issue the INIT_LINK mailbox command call. |
727 | * It is available to other drivers through the lpfc_hba data |
728 | * structure for use as a delayed link up mechanism with the |
729 | * module parameter lpfc_suppress_link_up. |
730 | * |
731 | * Return code |
732 | * 0 - success |
733 | * Any other value - error |
734 | **/ |
735 | static int |
736 | lpfc_hba_init_link(struct lpfc_hba *phba, uint32_t flag) |
737 | { |
738 | return lpfc_hba_init_link_fc_topology(phba, phba->cfg_topology, flag); |
739 | } |
740 | |
741 | /** |
742 | * lpfc_hba_init_link_fc_topology - Initialize FC link with desired topology |
743 | * @phba: pointer to lpfc hba data structure. |
744 | * @fc_topology: desired fc topology. |
745 | * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT |
746 | * |
747 | * This routine will issue the INIT_LINK mailbox command call. |
748 | * It is available to other drivers through the lpfc_hba data |
749 | * structure for use as a delayed link up mechanism with the |
750 | * module parameter lpfc_suppress_link_up. |
751 | * |
752 | * Return code |
753 | * 0 - success |
754 | * Any other value - error |
755 | **/ |
756 | int |
757 | lpfc_hba_init_link_fc_topology(struct lpfc_hba *phba, uint32_t fc_topology, |
758 | uint32_t flag) |
759 | { |
760 | struct lpfc_vport *vport = phba->pport; |
761 | LPFC_MBOXQ_t *pmb; |
762 | MAILBOX_t *mb; |
763 | int rc; |
764 | |
765 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
766 | if (!pmb) { |
767 | phba->link_state = LPFC_HBA_ERROR; |
768 | return -ENOMEM; |
769 | } |
770 | mb = &pmb->u.mb; |
771 | pmb->vport = vport; |
772 | |
773 | if ((phba->cfg_link_speed > LPFC_USER_LINK_SPEED_MAX) || |
774 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_1G) && |
775 | !(phba->lmt & LMT_1Gb)) || |
776 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_2G) && |
777 | !(phba->lmt & LMT_2Gb)) || |
778 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_4G) && |
779 | !(phba->lmt & LMT_4Gb)) || |
780 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_8G) && |
781 | !(phba->lmt & LMT_8Gb)) || |
782 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G) && |
783 | !(phba->lmt & LMT_10Gb)) || |
784 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G) && |
785 | !(phba->lmt & LMT_16Gb)) || |
786 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_32G) && |
787 | !(phba->lmt & LMT_32Gb)) || |
788 | ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_64G) && |
789 | !(phba->lmt & LMT_64Gb))) { |
790 | /* Reset link speed to auto */ |
791 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
792 | "1302 Invalid speed for this board:%d " |
793 | "Reset link speed to auto.\n" , |
794 | phba->cfg_link_speed); |
795 | phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO; |
796 | } |
797 | lpfc_init_link(phba, pmb, fc_topology, phba->cfg_link_speed); |
798 | pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; |
799 | if (phba->sli_rev < LPFC_SLI_REV4) |
800 | lpfc_set_loopback_flag(phba); |
801 | rc = lpfc_sli_issue_mbox(phba, pmb, flag); |
802 | if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) { |
803 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
804 | "0498 Adapter failed to init, mbxCmd x%x " |
805 | "INIT_LINK, mbxStatus x%x\n" , |
806 | mb->mbxCommand, mb->mbxStatus); |
807 | if (phba->sli_rev <= LPFC_SLI_REV3) { |
808 | /* Clear all interrupt enable conditions */ |
809 | writel(val: 0, addr: phba->HCregaddr); |
810 | readl(addr: phba->HCregaddr); /* flush */ |
811 | /* Clear all pending interrupts */ |
812 | writel(val: 0xffffffff, addr: phba->HAregaddr); |
813 | readl(addr: phba->HAregaddr); /* flush */ |
814 | } |
815 | phba->link_state = LPFC_HBA_ERROR; |
816 | if (rc != MBX_BUSY || flag == MBX_POLL) |
817 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
818 | return -EIO; |
819 | } |
820 | phba->cfg_suppress_link_up = LPFC_INITIALIZE_LINK; |
821 | if (flag == MBX_POLL) |
822 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
823 | |
824 | return 0; |
825 | } |
826 | |
827 | /** |
828 | * lpfc_hba_down_link - this routine downs the FC link |
829 | * @phba: pointer to lpfc hba data structure. |
830 | * @flag: mailbox command issue mode - either MBX_POLL or MBX_NOWAIT |
831 | * |
832 | * This routine will issue the DOWN_LINK mailbox command call. |
833 | * It is available to other drivers through the lpfc_hba data |
834 | * structure for use to stop the link. |
835 | * |
836 | * Return code |
837 | * 0 - success |
838 | * Any other value - error |
839 | **/ |
840 | static int |
841 | lpfc_hba_down_link(struct lpfc_hba *phba, uint32_t flag) |
842 | { |
843 | LPFC_MBOXQ_t *pmb; |
844 | int rc; |
845 | |
846 | pmb = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
847 | if (!pmb) { |
848 | phba->link_state = LPFC_HBA_ERROR; |
849 | return -ENOMEM; |
850 | } |
851 | |
852 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
853 | "0491 Adapter Link is disabled.\n" ); |
854 | lpfc_down_link(phba, pmb); |
855 | pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; |
856 | rc = lpfc_sli_issue_mbox(phba, pmb, flag); |
857 | if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) { |
858 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
859 | "2522 Adapter failed to issue DOWN_LINK" |
860 | " mbox command rc 0x%x\n" , rc); |
861 | |
862 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
863 | return -EIO; |
864 | } |
865 | if (flag == MBX_POLL) |
866 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
867 | |
868 | return 0; |
869 | } |
870 | |
871 | /** |
872 | * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset |
873 | * @phba: pointer to lpfc HBA data structure. |
874 | * |
875 | * This routine will do LPFC uninitialization before the HBA is reset when |
876 | * bringing down the SLI Layer. |
877 | * |
878 | * Return codes |
879 | * 0 - success. |
880 | * Any other value - error. |
881 | **/ |
882 | int |
883 | lpfc_hba_down_prep(struct lpfc_hba *phba) |
884 | { |
885 | struct lpfc_vport **vports; |
886 | int i; |
887 | |
888 | if (phba->sli_rev <= LPFC_SLI_REV3) { |
889 | /* Disable interrupts */ |
890 | writel(val: 0, addr: phba->HCregaddr); |
891 | readl(addr: phba->HCregaddr); /* flush */ |
892 | } |
893 | |
894 | if (phba->pport->load_flag & FC_UNLOADING) |
895 | lpfc_cleanup_discovery_resources(phba->pport); |
896 | else { |
897 | vports = lpfc_create_vport_work_array(phba); |
898 | if (vports != NULL) |
899 | for (i = 0; i <= phba->max_vports && |
900 | vports[i] != NULL; i++) |
901 | lpfc_cleanup_discovery_resources(vports[i]); |
902 | lpfc_destroy_vport_work_array(phba, vports); |
903 | } |
904 | return 0; |
905 | } |
906 | |
907 | /** |
908 | * lpfc_sli4_free_sp_events - Cleanup sp_queue_events to free |
909 | * rspiocb which got deferred |
910 | * |
911 | * @phba: pointer to lpfc HBA data structure. |
912 | * |
913 | * This routine will cleanup completed slow path events after HBA is reset |
914 | * when bringing down the SLI Layer. |
915 | * |
916 | * |
917 | * Return codes |
918 | * void. |
919 | **/ |
920 | static void |
921 | lpfc_sli4_free_sp_events(struct lpfc_hba *phba) |
922 | { |
923 | struct lpfc_iocbq *rspiocbq; |
924 | struct hbq_dmabuf *dmabuf; |
925 | struct lpfc_cq_event *cq_event; |
926 | |
927 | spin_lock_irq(lock: &phba->hbalock); |
928 | phba->hba_flag &= ~HBA_SP_QUEUE_EVT; |
929 | spin_unlock_irq(lock: &phba->hbalock); |
930 | |
931 | while (!list_empty(head: &phba->sli4_hba.sp_queue_event)) { |
932 | /* Get the response iocb from the head of work queue */ |
933 | spin_lock_irq(lock: &phba->hbalock); |
934 | list_remove_head(&phba->sli4_hba.sp_queue_event, |
935 | cq_event, struct lpfc_cq_event, list); |
936 | spin_unlock_irq(lock: &phba->hbalock); |
937 | |
938 | switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) { |
939 | case CQE_CODE_COMPL_WQE: |
940 | rspiocbq = container_of(cq_event, struct lpfc_iocbq, |
941 | cq_event); |
942 | lpfc_sli_release_iocbq(phba, rspiocbq); |
943 | break; |
944 | case CQE_CODE_RECEIVE: |
945 | case CQE_CODE_RECEIVE_V1: |
946 | dmabuf = container_of(cq_event, struct hbq_dmabuf, |
947 | cq_event); |
948 | lpfc_in_buf_free(phba, &dmabuf->dbuf); |
949 | } |
950 | } |
951 | } |
952 | |
953 | /** |
954 | * lpfc_hba_free_post_buf - Perform lpfc uninitialization after HBA reset |
955 | * @phba: pointer to lpfc HBA data structure. |
956 | * |
957 | * This routine will cleanup posted ELS buffers after the HBA is reset |
958 | * when bringing down the SLI Layer. |
959 | * |
960 | * |
961 | * Return codes |
962 | * void. |
963 | **/ |
964 | static void |
965 | lpfc_hba_free_post_buf(struct lpfc_hba *phba) |
966 | { |
967 | struct lpfc_sli *psli = &phba->sli; |
968 | struct lpfc_sli_ring *pring; |
969 | struct lpfc_dmabuf *mp, *next_mp; |
970 | LIST_HEAD(buflist); |
971 | int count; |
972 | |
973 | if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) |
974 | lpfc_sli_hbqbuf_free_all(phba); |
975 | else { |
976 | /* Cleanup preposted buffers on the ELS ring */ |
977 | pring = &psli->sli3_ring[LPFC_ELS_RING]; |
978 | spin_lock_irq(lock: &phba->hbalock); |
979 | list_splice_init(list: &pring->postbufq, head: &buflist); |
980 | spin_unlock_irq(lock: &phba->hbalock); |
981 | |
982 | count = 0; |
983 | list_for_each_entry_safe(mp, next_mp, &buflist, list) { |
984 | list_del(entry: &mp->list); |
985 | count++; |
986 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
987 | kfree(objp: mp); |
988 | } |
989 | |
990 | spin_lock_irq(lock: &phba->hbalock); |
991 | pring->postbufq_cnt -= count; |
992 | spin_unlock_irq(lock: &phba->hbalock); |
993 | } |
994 | } |
995 | |
996 | /** |
997 | * lpfc_hba_clean_txcmplq - Perform lpfc uninitialization after HBA reset |
998 | * @phba: pointer to lpfc HBA data structure. |
999 | * |
1000 | * This routine will cleanup the txcmplq after the HBA is reset when bringing |
1001 | * down the SLI Layer. |
1002 | * |
1003 | * Return codes |
1004 | * void |
1005 | **/ |
1006 | static void |
1007 | lpfc_hba_clean_txcmplq(struct lpfc_hba *phba) |
1008 | { |
1009 | struct lpfc_sli *psli = &phba->sli; |
1010 | struct lpfc_queue *qp = NULL; |
1011 | struct lpfc_sli_ring *pring; |
1012 | LIST_HEAD(completions); |
1013 | int i; |
1014 | struct lpfc_iocbq *piocb, *next_iocb; |
1015 | |
1016 | if (phba->sli_rev != LPFC_SLI_REV4) { |
1017 | for (i = 0; i < psli->num_rings; i++) { |
1018 | pring = &psli->sli3_ring[i]; |
1019 | spin_lock_irq(lock: &phba->hbalock); |
1020 | /* At this point in time the HBA is either reset or DOA |
1021 | * Nothing should be on txcmplq as it will |
1022 | * NEVER complete. |
1023 | */ |
1024 | list_splice_init(list: &pring->txcmplq, head: &completions); |
1025 | pring->txcmplq_cnt = 0; |
1026 | spin_unlock_irq(lock: &phba->hbalock); |
1027 | |
1028 | lpfc_sli_abort_iocb_ring(phba, pring); |
1029 | } |
1030 | /* Cancel all the IOCBs from the completions list */ |
1031 | lpfc_sli_cancel_iocbs(phba, &completions, |
1032 | IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED); |
1033 | return; |
1034 | } |
1035 | list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) { |
1036 | pring = qp->pring; |
1037 | if (!pring) |
1038 | continue; |
1039 | spin_lock_irq(lock: &pring->ring_lock); |
1040 | list_for_each_entry_safe(piocb, next_iocb, |
1041 | &pring->txcmplq, list) |
1042 | piocb->cmd_flag &= ~LPFC_IO_ON_TXCMPLQ; |
1043 | list_splice_init(list: &pring->txcmplq, head: &completions); |
1044 | pring->txcmplq_cnt = 0; |
1045 | spin_unlock_irq(lock: &pring->ring_lock); |
1046 | lpfc_sli_abort_iocb_ring(phba, pring); |
1047 | } |
1048 | /* Cancel all the IOCBs from the completions list */ |
1049 | lpfc_sli_cancel_iocbs(phba, &completions, |
1050 | IOSTAT_LOCAL_REJECT, IOERR_SLI_ABORTED); |
1051 | } |
1052 | |
1053 | /** |
1054 | * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset |
1055 | * @phba: pointer to lpfc HBA data structure. |
1056 | * |
1057 | * This routine will do uninitialization after the HBA is reset when bring |
1058 | * down the SLI Layer. |
1059 | * |
1060 | * Return codes |
1061 | * 0 - success. |
1062 | * Any other value - error. |
1063 | **/ |
1064 | static int |
1065 | lpfc_hba_down_post_s3(struct lpfc_hba *phba) |
1066 | { |
1067 | lpfc_hba_free_post_buf(phba); |
1068 | lpfc_hba_clean_txcmplq(phba); |
1069 | return 0; |
1070 | } |
1071 | |
1072 | /** |
1073 | * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset |
1074 | * @phba: pointer to lpfc HBA data structure. |
1075 | * |
1076 | * This routine will do uninitialization after the HBA is reset when bring |
1077 | * down the SLI Layer. |
1078 | * |
1079 | * Return codes |
1080 | * 0 - success. |
1081 | * Any other value - error. |
1082 | **/ |
1083 | static int |
1084 | lpfc_hba_down_post_s4(struct lpfc_hba *phba) |
1085 | { |
1086 | struct lpfc_io_buf *psb, *psb_next; |
1087 | struct lpfc_async_xchg_ctx *ctxp, *ctxp_next; |
1088 | struct lpfc_sli4_hdw_queue *qp; |
1089 | LIST_HEAD(aborts); |
1090 | LIST_HEAD(nvme_aborts); |
1091 | LIST_HEAD(nvmet_aborts); |
1092 | struct lpfc_sglq *sglq_entry = NULL; |
1093 | int cnt, idx; |
1094 | |
1095 | |
1096 | lpfc_sli_hbqbuf_free_all(phba); |
1097 | lpfc_hba_clean_txcmplq(phba); |
1098 | |
1099 | /* At this point in time the HBA is either reset or DOA. Either |
1100 | * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be |
1101 | * on the lpfc_els_sgl_list so that it can either be freed if the |
1102 | * driver is unloading or reposted if the driver is restarting |
1103 | * the port. |
1104 | */ |
1105 | |
1106 | /* sgl_list_lock required because worker thread uses this |
1107 | * list. |
1108 | */ |
1109 | spin_lock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
1110 | list_for_each_entry(sglq_entry, |
1111 | &phba->sli4_hba.lpfc_abts_els_sgl_list, list) |
1112 | sglq_entry->state = SGL_FREED; |
1113 | |
1114 | list_splice_init(list: &phba->sli4_hba.lpfc_abts_els_sgl_list, |
1115 | head: &phba->sli4_hba.lpfc_els_sgl_list); |
1116 | |
1117 | |
1118 | spin_unlock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
1119 | |
1120 | /* abts_xxxx_buf_list_lock required because worker thread uses this |
1121 | * list. |
1122 | */ |
1123 | spin_lock_irq(lock: &phba->hbalock); |
1124 | cnt = 0; |
1125 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
1126 | qp = &phba->sli4_hba.hdwq[idx]; |
1127 | |
1128 | spin_lock(lock: &qp->abts_io_buf_list_lock); |
1129 | list_splice_init(list: &qp->lpfc_abts_io_buf_list, |
1130 | head: &aborts); |
1131 | |
1132 | list_for_each_entry_safe(psb, psb_next, &aborts, list) { |
1133 | psb->pCmd = NULL; |
1134 | psb->status = IOSTAT_SUCCESS; |
1135 | cnt++; |
1136 | } |
1137 | spin_lock(lock: &qp->io_buf_list_put_lock); |
1138 | list_splice_init(list: &aborts, head: &qp->lpfc_io_buf_list_put); |
1139 | qp->put_io_bufs += qp->abts_scsi_io_bufs; |
1140 | qp->put_io_bufs += qp->abts_nvme_io_bufs; |
1141 | qp->abts_scsi_io_bufs = 0; |
1142 | qp->abts_nvme_io_bufs = 0; |
1143 | spin_unlock(lock: &qp->io_buf_list_put_lock); |
1144 | spin_unlock(lock: &qp->abts_io_buf_list_lock); |
1145 | } |
1146 | spin_unlock_irq(lock: &phba->hbalock); |
1147 | |
1148 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
1149 | spin_lock_irq(lock: &phba->sli4_hba.abts_nvmet_buf_list_lock); |
1150 | list_splice_init(list: &phba->sli4_hba.lpfc_abts_nvmet_ctx_list, |
1151 | head: &nvmet_aborts); |
1152 | spin_unlock_irq(lock: &phba->sli4_hba.abts_nvmet_buf_list_lock); |
1153 | list_for_each_entry_safe(ctxp, ctxp_next, &nvmet_aborts, list) { |
1154 | ctxp->flag &= ~(LPFC_NVME_XBUSY | LPFC_NVME_ABORT_OP); |
1155 | lpfc_nvmet_ctxbuf_post(phba, ctxp: ctxp->ctxbuf); |
1156 | } |
1157 | } |
1158 | |
1159 | lpfc_sli4_free_sp_events(phba); |
1160 | return cnt; |
1161 | } |
1162 | |
1163 | /** |
1164 | * lpfc_hba_down_post - Wrapper func for hba down post routine |
1165 | * @phba: pointer to lpfc HBA data structure. |
1166 | * |
1167 | * This routine wraps the actual SLI3 or SLI4 routine for performing |
1168 | * uninitialization after the HBA is reset when bring down the SLI Layer. |
1169 | * |
1170 | * Return codes |
1171 | * 0 - success. |
1172 | * Any other value - error. |
1173 | **/ |
1174 | int |
1175 | lpfc_hba_down_post(struct lpfc_hba *phba) |
1176 | { |
1177 | return (*phba->lpfc_hba_down_post)(phba); |
1178 | } |
1179 | |
1180 | /** |
1181 | * lpfc_hb_timeout - The HBA-timer timeout handler |
1182 | * @t: timer context used to obtain the pointer to lpfc hba data structure. |
1183 | * |
1184 | * This is the HBA-timer timeout handler registered to the lpfc driver. When |
1185 | * this timer fires, a HBA timeout event shall be posted to the lpfc driver |
1186 | * work-port-events bitmap and the worker thread is notified. This timeout |
1187 | * event will be used by the worker thread to invoke the actual timeout |
1188 | * handler routine, lpfc_hb_timeout_handler. Any periodical operations will |
1189 | * be performed in the timeout handler and the HBA timeout event bit shall |
1190 | * be cleared by the worker thread after it has taken the event bitmap out. |
1191 | **/ |
1192 | static void |
1193 | lpfc_hb_timeout(struct timer_list *t) |
1194 | { |
1195 | struct lpfc_hba *phba; |
1196 | uint32_t tmo_posted; |
1197 | unsigned long iflag; |
1198 | |
1199 | phba = from_timer(phba, t, hb_tmofunc); |
1200 | |
1201 | /* Check for heart beat timeout conditions */ |
1202 | spin_lock_irqsave(&phba->pport->work_port_lock, iflag); |
1203 | tmo_posted = phba->pport->work_port_events & WORKER_HB_TMO; |
1204 | if (!tmo_posted) |
1205 | phba->pport->work_port_events |= WORKER_HB_TMO; |
1206 | spin_unlock_irqrestore(lock: &phba->pport->work_port_lock, flags: iflag); |
1207 | |
1208 | /* Tell the worker thread there is work to do */ |
1209 | if (!tmo_posted) |
1210 | lpfc_worker_wake_up(phba); |
1211 | return; |
1212 | } |
1213 | |
1214 | /** |
1215 | * lpfc_rrq_timeout - The RRQ-timer timeout handler |
1216 | * @t: timer context used to obtain the pointer to lpfc hba data structure. |
1217 | * |
1218 | * This is the RRQ-timer timeout handler registered to the lpfc driver. When |
1219 | * this timer fires, a RRQ timeout event shall be posted to the lpfc driver |
1220 | * work-port-events bitmap and the worker thread is notified. This timeout |
1221 | * event will be used by the worker thread to invoke the actual timeout |
1222 | * handler routine, lpfc_rrq_handler. Any periodical operations will |
1223 | * be performed in the timeout handler and the RRQ timeout event bit shall |
1224 | * be cleared by the worker thread after it has taken the event bitmap out. |
1225 | **/ |
1226 | static void |
1227 | lpfc_rrq_timeout(struct timer_list *t) |
1228 | { |
1229 | struct lpfc_hba *phba; |
1230 | unsigned long iflag; |
1231 | |
1232 | phba = from_timer(phba, t, rrq_tmr); |
1233 | spin_lock_irqsave(&phba->pport->work_port_lock, iflag); |
1234 | if (!(phba->pport->load_flag & FC_UNLOADING)) |
1235 | phba->hba_flag |= HBA_RRQ_ACTIVE; |
1236 | else |
1237 | phba->hba_flag &= ~HBA_RRQ_ACTIVE; |
1238 | spin_unlock_irqrestore(lock: &phba->pport->work_port_lock, flags: iflag); |
1239 | |
1240 | if (!(phba->pport->load_flag & FC_UNLOADING)) |
1241 | lpfc_worker_wake_up(phba); |
1242 | } |
1243 | |
1244 | /** |
1245 | * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function |
1246 | * @phba: pointer to lpfc hba data structure. |
1247 | * @pmboxq: pointer to the driver internal queue element for mailbox command. |
1248 | * |
1249 | * This is the callback function to the lpfc heart-beat mailbox command. |
1250 | * If configured, the lpfc driver issues the heart-beat mailbox command to |
1251 | * the HBA every LPFC_HB_MBOX_INTERVAL (current 5) seconds. At the time the |
1252 | * heart-beat mailbox command is issued, the driver shall set up heart-beat |
1253 | * timeout timer to LPFC_HB_MBOX_TIMEOUT (current 30) seconds and marks |
1254 | * heart-beat outstanding state. Once the mailbox command comes back and |
1255 | * no error conditions detected, the heart-beat mailbox command timer is |
1256 | * reset to LPFC_HB_MBOX_INTERVAL seconds and the heart-beat outstanding |
1257 | * state is cleared for the next heart-beat. If the timer expired with the |
1258 | * heart-beat outstanding state set, the driver will put the HBA offline. |
1259 | **/ |
1260 | static void |
1261 | lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq) |
1262 | { |
1263 | unsigned long drvr_flag; |
1264 | |
1265 | spin_lock_irqsave(&phba->hbalock, drvr_flag); |
1266 | phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO); |
1267 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: drvr_flag); |
1268 | |
1269 | /* Check and reset heart-beat timer if necessary */ |
1270 | mempool_free(element: pmboxq, pool: phba->mbox_mem_pool); |
1271 | if (!(phba->pport->fc_flag & FC_OFFLINE_MODE) && |
1272 | !(phba->link_state == LPFC_HBA_ERROR) && |
1273 | !(phba->pport->load_flag & FC_UNLOADING)) |
1274 | mod_timer(timer: &phba->hb_tmofunc, |
1275 | expires: jiffies + |
1276 | msecs_to_jiffies(m: 1000 * LPFC_HB_MBOX_INTERVAL)); |
1277 | return; |
1278 | } |
1279 | |
1280 | /* |
1281 | * lpfc_idle_stat_delay_work - idle_stat tracking |
1282 | * |
1283 | * This routine tracks per-eq idle_stat and determines polling decisions. |
1284 | * |
1285 | * Return codes: |
1286 | * None |
1287 | **/ |
1288 | static void |
1289 | lpfc_idle_stat_delay_work(struct work_struct *work) |
1290 | { |
1291 | struct lpfc_hba *phba = container_of(to_delayed_work(work), |
1292 | struct lpfc_hba, |
1293 | idle_stat_delay_work); |
1294 | struct lpfc_queue *eq; |
1295 | struct lpfc_sli4_hdw_queue *hdwq; |
1296 | struct lpfc_idle_stat *idle_stat; |
1297 | u32 i, idle_percent; |
1298 | u64 wall, wall_idle, diff_wall, diff_idle, busy_time; |
1299 | |
1300 | if (phba->pport->load_flag & FC_UNLOADING) |
1301 | return; |
1302 | |
1303 | if (phba->link_state == LPFC_HBA_ERROR || |
1304 | phba->pport->fc_flag & FC_OFFLINE_MODE || |
1305 | phba->cmf_active_mode != LPFC_CFG_OFF) |
1306 | goto requeue; |
1307 | |
1308 | for_each_present_cpu(i) { |
1309 | hdwq = &phba->sli4_hba.hdwq[phba->sli4_hba.cpu_map[i].hdwq]; |
1310 | eq = hdwq->hba_eq; |
1311 | |
1312 | /* Skip if we've already handled this eq's primary CPU */ |
1313 | if (eq->chann != i) |
1314 | continue; |
1315 | |
1316 | idle_stat = &phba->sli4_hba.idle_stat[i]; |
1317 | |
1318 | /* get_cpu_idle_time returns values as running counters. Thus, |
1319 | * to know the amount for this period, the prior counter values |
1320 | * need to be subtracted from the current counter values. |
1321 | * From there, the idle time stat can be calculated as a |
1322 | * percentage of 100 - the sum of the other consumption times. |
1323 | */ |
1324 | wall_idle = get_cpu_idle_time(cpu: i, wall: &wall, io_busy: 1); |
1325 | diff_idle = wall_idle - idle_stat->prev_idle; |
1326 | diff_wall = wall - idle_stat->prev_wall; |
1327 | |
1328 | if (diff_wall <= diff_idle) |
1329 | busy_time = 0; |
1330 | else |
1331 | busy_time = diff_wall - diff_idle; |
1332 | |
1333 | idle_percent = div64_u64(dividend: 100 * busy_time, divisor: diff_wall); |
1334 | idle_percent = 100 - idle_percent; |
1335 | |
1336 | if (idle_percent < 15) |
1337 | eq->poll_mode = LPFC_QUEUE_WORK; |
1338 | else |
1339 | eq->poll_mode = LPFC_THREADED_IRQ; |
1340 | |
1341 | idle_stat->prev_idle = wall_idle; |
1342 | idle_stat->prev_wall = wall; |
1343 | } |
1344 | |
1345 | requeue: |
1346 | schedule_delayed_work(dwork: &phba->idle_stat_delay_work, |
1347 | delay: msecs_to_jiffies(LPFC_IDLE_STAT_DELAY)); |
1348 | } |
1349 | |
1350 | static void |
1351 | lpfc_hb_eq_delay_work(struct work_struct *work) |
1352 | { |
1353 | struct lpfc_hba *phba = container_of(to_delayed_work(work), |
1354 | struct lpfc_hba, eq_delay_work); |
1355 | struct lpfc_eq_intr_info *eqi, *eqi_new; |
1356 | struct lpfc_queue *eq, *eq_next; |
1357 | unsigned char *ena_delay = NULL; |
1358 | uint32_t usdelay; |
1359 | int i; |
1360 | |
1361 | if (!phba->cfg_auto_imax || phba->pport->load_flag & FC_UNLOADING) |
1362 | return; |
1363 | |
1364 | if (phba->link_state == LPFC_HBA_ERROR || |
1365 | phba->pport->fc_flag & FC_OFFLINE_MODE) |
1366 | goto requeue; |
1367 | |
1368 | ena_delay = kcalloc(n: phba->sli4_hba.num_possible_cpu, size: sizeof(*ena_delay), |
1369 | GFP_KERNEL); |
1370 | if (!ena_delay) |
1371 | goto requeue; |
1372 | |
1373 | for (i = 0; i < phba->cfg_irq_chann; i++) { |
1374 | /* Get the EQ corresponding to the IRQ vector */ |
1375 | eq = phba->sli4_hba.hba_eq_hdl[i].eq; |
1376 | if (!eq) |
1377 | continue; |
1378 | if (eq->q_mode || eq->q_flag & HBA_EQ_DELAY_CHK) { |
1379 | eq->q_flag &= ~HBA_EQ_DELAY_CHK; |
1380 | ena_delay[eq->last_cpu] = 1; |
1381 | } |
1382 | } |
1383 | |
1384 | for_each_present_cpu(i) { |
1385 | eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i); |
1386 | if (ena_delay[i]) { |
1387 | usdelay = (eqi->icnt >> 10) * LPFC_EQ_DELAY_STEP; |
1388 | if (usdelay > LPFC_MAX_AUTO_EQ_DELAY) |
1389 | usdelay = LPFC_MAX_AUTO_EQ_DELAY; |
1390 | } else { |
1391 | usdelay = 0; |
1392 | } |
1393 | |
1394 | eqi->icnt = 0; |
1395 | |
1396 | list_for_each_entry_safe(eq, eq_next, &eqi->list, cpu_list) { |
1397 | if (unlikely(eq->last_cpu != i)) { |
1398 | eqi_new = per_cpu_ptr(phba->sli4_hba.eq_info, |
1399 | eq->last_cpu); |
1400 | list_move_tail(list: &eq->cpu_list, head: &eqi_new->list); |
1401 | continue; |
1402 | } |
1403 | if (usdelay != eq->q_mode) |
1404 | lpfc_modify_hba_eq_delay(phba, startq: eq->hdwq, numq: 1, |
1405 | usdelay); |
1406 | } |
1407 | } |
1408 | |
1409 | kfree(objp: ena_delay); |
1410 | |
1411 | requeue: |
1412 | queue_delayed_work(wq: phba->wq, dwork: &phba->eq_delay_work, |
1413 | delay: msecs_to_jiffies(LPFC_EQ_DELAY_MSECS)); |
1414 | } |
1415 | |
1416 | /** |
1417 | * lpfc_hb_mxp_handler - Multi-XRI pools handler to adjust XRI distribution |
1418 | * @phba: pointer to lpfc hba data structure. |
1419 | * |
1420 | * For each heartbeat, this routine does some heuristic methods to adjust |
1421 | * XRI distribution. The goal is to fully utilize free XRIs. |
1422 | **/ |
1423 | static void lpfc_hb_mxp_handler(struct lpfc_hba *phba) |
1424 | { |
1425 | u32 i; |
1426 | u32 hwq_count; |
1427 | |
1428 | hwq_count = phba->cfg_hdw_queue; |
1429 | for (i = 0; i < hwq_count; i++) { |
1430 | /* Adjust XRIs in private pool */ |
1431 | lpfc_adjust_pvt_pool_count(phba, hwqid: i); |
1432 | |
1433 | /* Adjust high watermark */ |
1434 | lpfc_adjust_high_watermark(phba, hwqid: i); |
1435 | |
1436 | #ifdef LPFC_MXP_STAT |
1437 | /* Snapshot pbl, pvt and busy count */ |
1438 | lpfc_snapshot_mxp(phba, i); |
1439 | #endif |
1440 | } |
1441 | } |
1442 | |
1443 | /** |
1444 | * lpfc_issue_hb_mbox - Issues heart-beat mailbox command |
1445 | * @phba: pointer to lpfc hba data structure. |
1446 | * |
1447 | * If a HB mbox is not already in progrees, this routine will allocate |
1448 | * a LPFC_MBOXQ_t, populate it with a MBX_HEARTBEAT (0x31) command, |
1449 | * and issue it. The HBA_HBEAT_INP flag means the command is in progress. |
1450 | **/ |
1451 | int |
1452 | lpfc_issue_hb_mbox(struct lpfc_hba *phba) |
1453 | { |
1454 | LPFC_MBOXQ_t *pmboxq; |
1455 | int retval; |
1456 | |
1457 | /* Is a Heartbeat mbox already in progress */ |
1458 | if (phba->hba_flag & HBA_HBEAT_INP) |
1459 | return 0; |
1460 | |
1461 | pmboxq = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
1462 | if (!pmboxq) |
1463 | return -ENOMEM; |
1464 | |
1465 | lpfc_heart_beat(phba, pmboxq); |
1466 | pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl; |
1467 | pmboxq->vport = phba->pport; |
1468 | retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); |
1469 | |
1470 | if (retval != MBX_BUSY && retval != MBX_SUCCESS) { |
1471 | mempool_free(element: pmboxq, pool: phba->mbox_mem_pool); |
1472 | return -ENXIO; |
1473 | } |
1474 | phba->hba_flag |= HBA_HBEAT_INP; |
1475 | |
1476 | return 0; |
1477 | } |
1478 | |
1479 | /** |
1480 | * lpfc_issue_hb_tmo - Signals heartbeat timer to issue mbox command |
1481 | * @phba: pointer to lpfc hba data structure. |
1482 | * |
1483 | * The heartbeat timer (every 5 sec) will fire. If the HBA_HBEAT_TMO |
1484 | * flag is set, it will force a MBX_HEARTBEAT mbox command, regardless |
1485 | * of the value of lpfc_enable_hba_heartbeat. |
1486 | * If lpfc_enable_hba_heartbeat is set, the timeout routine will always |
1487 | * try to issue a MBX_HEARTBEAT mbox command. |
1488 | **/ |
1489 | void |
1490 | lpfc_issue_hb_tmo(struct lpfc_hba *phba) |
1491 | { |
1492 | if (phba->cfg_enable_hba_heartbeat) |
1493 | return; |
1494 | phba->hba_flag |= HBA_HBEAT_TMO; |
1495 | } |
1496 | |
1497 | /** |
1498 | * lpfc_hb_timeout_handler - The HBA-timer timeout handler |
1499 | * @phba: pointer to lpfc hba data structure. |
1500 | * |
1501 | * This is the actual HBA-timer timeout handler to be invoked by the worker |
1502 | * thread whenever the HBA timer fired and HBA-timeout event posted. This |
1503 | * handler performs any periodic operations needed for the device. If such |
1504 | * periodic event has already been attended to either in the interrupt handler |
1505 | * or by processing slow-ring or fast-ring events within the HBA-timer |
1506 | * timeout window (LPFC_HB_MBOX_INTERVAL), this handler just simply resets |
1507 | * the timer for the next timeout period. If lpfc heart-beat mailbox command |
1508 | * is configured and there is no heart-beat mailbox command outstanding, a |
1509 | * heart-beat mailbox is issued and timer set properly. Otherwise, if there |
1510 | * has been a heart-beat mailbox command outstanding, the HBA shall be put |
1511 | * to offline. |
1512 | **/ |
1513 | void |
1514 | lpfc_hb_timeout_handler(struct lpfc_hba *phba) |
1515 | { |
1516 | struct lpfc_vport **vports; |
1517 | struct lpfc_dmabuf *buf_ptr; |
1518 | int retval = 0; |
1519 | int i, tmo; |
1520 | struct lpfc_sli *psli = &phba->sli; |
1521 | LIST_HEAD(completions); |
1522 | |
1523 | if (phba->cfg_xri_rebalancing) { |
1524 | /* Multi-XRI pools handler */ |
1525 | lpfc_hb_mxp_handler(phba); |
1526 | } |
1527 | |
1528 | vports = lpfc_create_vport_work_array(phba); |
1529 | if (vports != NULL) |
1530 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
1531 | lpfc_rcv_seq_check_edtov(vports[i]); |
1532 | lpfc_fdmi_change_check(vport: vports[i]); |
1533 | } |
1534 | lpfc_destroy_vport_work_array(phba, vports); |
1535 | |
1536 | if ((phba->link_state == LPFC_HBA_ERROR) || |
1537 | (phba->pport->load_flag & FC_UNLOADING) || |
1538 | (phba->pport->fc_flag & FC_OFFLINE_MODE)) |
1539 | return; |
1540 | |
1541 | if (phba->elsbuf_cnt && |
1542 | (phba->elsbuf_cnt == phba->elsbuf_prev_cnt)) { |
1543 | spin_lock_irq(lock: &phba->hbalock); |
1544 | list_splice_init(list: &phba->elsbuf, head: &completions); |
1545 | phba->elsbuf_cnt = 0; |
1546 | phba->elsbuf_prev_cnt = 0; |
1547 | spin_unlock_irq(lock: &phba->hbalock); |
1548 | |
1549 | while (!list_empty(head: &completions)) { |
1550 | list_remove_head(&completions, buf_ptr, |
1551 | struct lpfc_dmabuf, list); |
1552 | lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys); |
1553 | kfree(objp: buf_ptr); |
1554 | } |
1555 | } |
1556 | phba->elsbuf_prev_cnt = phba->elsbuf_cnt; |
1557 | |
1558 | /* If there is no heart beat outstanding, issue a heartbeat command */ |
1559 | if (phba->cfg_enable_hba_heartbeat) { |
1560 | /* If IOs are completing, no need to issue a MBX_HEARTBEAT */ |
1561 | spin_lock_irq(lock: &phba->pport->work_port_lock); |
1562 | if (time_after(phba->last_completion_time + |
1563 | msecs_to_jiffies(1000 * LPFC_HB_MBOX_INTERVAL), |
1564 | jiffies)) { |
1565 | spin_unlock_irq(lock: &phba->pport->work_port_lock); |
1566 | if (phba->hba_flag & HBA_HBEAT_INP) |
1567 | tmo = (1000 * LPFC_HB_MBOX_TIMEOUT); |
1568 | else |
1569 | tmo = (1000 * LPFC_HB_MBOX_INTERVAL); |
1570 | goto out; |
1571 | } |
1572 | spin_unlock_irq(lock: &phba->pport->work_port_lock); |
1573 | |
1574 | /* Check if a MBX_HEARTBEAT is already in progress */ |
1575 | if (phba->hba_flag & HBA_HBEAT_INP) { |
1576 | /* |
1577 | * If heart beat timeout called with HBA_HBEAT_INP set |
1578 | * we need to give the hb mailbox cmd a chance to |
1579 | * complete or TMO. |
1580 | */ |
1581 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
1582 | "0459 Adapter heartbeat still outstanding: " |
1583 | "last compl time was %d ms.\n" , |
1584 | jiffies_to_msecs(jiffies |
1585 | - phba->last_completion_time)); |
1586 | tmo = (1000 * LPFC_HB_MBOX_TIMEOUT); |
1587 | } else { |
1588 | if ((!(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) && |
1589 | (list_empty(head: &psli->mboxq))) { |
1590 | |
1591 | retval = lpfc_issue_hb_mbox(phba); |
1592 | if (retval) { |
1593 | tmo = (1000 * LPFC_HB_MBOX_INTERVAL); |
1594 | goto out; |
1595 | } |
1596 | phba->skipped_hb = 0; |
1597 | } else if (time_before_eq(phba->last_completion_time, |
1598 | phba->skipped_hb)) { |
1599 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
1600 | "2857 Last completion time not " |
1601 | " updated in %d ms\n" , |
1602 | jiffies_to_msecs(jiffies |
1603 | - phba->last_completion_time)); |
1604 | } else |
1605 | phba->skipped_hb = jiffies; |
1606 | |
1607 | tmo = (1000 * LPFC_HB_MBOX_TIMEOUT); |
1608 | goto out; |
1609 | } |
1610 | } else { |
1611 | /* Check to see if we want to force a MBX_HEARTBEAT */ |
1612 | if (phba->hba_flag & HBA_HBEAT_TMO) { |
1613 | retval = lpfc_issue_hb_mbox(phba); |
1614 | if (retval) |
1615 | tmo = (1000 * LPFC_HB_MBOX_INTERVAL); |
1616 | else |
1617 | tmo = (1000 * LPFC_HB_MBOX_TIMEOUT); |
1618 | goto out; |
1619 | } |
1620 | tmo = (1000 * LPFC_HB_MBOX_INTERVAL); |
1621 | } |
1622 | out: |
1623 | mod_timer(timer: &phba->hb_tmofunc, expires: jiffies + msecs_to_jiffies(m: tmo)); |
1624 | } |
1625 | |
1626 | /** |
1627 | * lpfc_offline_eratt - Bring lpfc offline on hardware error attention |
1628 | * @phba: pointer to lpfc hba data structure. |
1629 | * |
1630 | * This routine is called to bring the HBA offline when HBA hardware error |
1631 | * other than Port Error 6 has been detected. |
1632 | **/ |
1633 | static void |
1634 | lpfc_offline_eratt(struct lpfc_hba *phba) |
1635 | { |
1636 | struct lpfc_sli *psli = &phba->sli; |
1637 | |
1638 | spin_lock_irq(lock: &phba->hbalock); |
1639 | psli->sli_flag &= ~LPFC_SLI_ACTIVE; |
1640 | spin_unlock_irq(lock: &phba->hbalock); |
1641 | lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); |
1642 | |
1643 | lpfc_offline(phba); |
1644 | lpfc_reset_barrier(phba); |
1645 | spin_lock_irq(lock: &phba->hbalock); |
1646 | lpfc_sli_brdreset(phba); |
1647 | spin_unlock_irq(lock: &phba->hbalock); |
1648 | lpfc_hba_down_post(phba); |
1649 | lpfc_sli_brdready(phba, HS_MBRDY); |
1650 | lpfc_unblock_mgmt_io(phba); |
1651 | phba->link_state = LPFC_HBA_ERROR; |
1652 | return; |
1653 | } |
1654 | |
1655 | /** |
1656 | * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention |
1657 | * @phba: pointer to lpfc hba data structure. |
1658 | * |
1659 | * This routine is called to bring a SLI4 HBA offline when HBA hardware error |
1660 | * other than Port Error 6 has been detected. |
1661 | **/ |
1662 | void |
1663 | lpfc_sli4_offline_eratt(struct lpfc_hba *phba) |
1664 | { |
1665 | spin_lock_irq(lock: &phba->hbalock); |
1666 | if (phba->link_state == LPFC_HBA_ERROR && |
1667 | test_bit(HBA_PCI_ERR, &phba->bit_flags)) { |
1668 | spin_unlock_irq(lock: &phba->hbalock); |
1669 | return; |
1670 | } |
1671 | phba->link_state = LPFC_HBA_ERROR; |
1672 | spin_unlock_irq(lock: &phba->hbalock); |
1673 | |
1674 | lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); |
1675 | lpfc_sli_flush_io_rings(phba); |
1676 | lpfc_offline(phba); |
1677 | lpfc_hba_down_post(phba); |
1678 | lpfc_unblock_mgmt_io(phba); |
1679 | } |
1680 | |
1681 | /** |
1682 | * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler |
1683 | * @phba: pointer to lpfc hba data structure. |
1684 | * |
1685 | * This routine is invoked to handle the deferred HBA hardware error |
1686 | * conditions. This type of error is indicated by HBA by setting ER1 |
1687 | * and another ER bit in the host status register. The driver will |
1688 | * wait until the ER1 bit clears before handling the error condition. |
1689 | **/ |
1690 | static void |
1691 | lpfc_handle_deferred_eratt(struct lpfc_hba *phba) |
1692 | { |
1693 | uint32_t old_host_status = phba->work_hs; |
1694 | struct lpfc_sli *psli = &phba->sli; |
1695 | |
1696 | /* If the pci channel is offline, ignore possible errors, |
1697 | * since we cannot communicate with the pci card anyway. |
1698 | */ |
1699 | if (pci_channel_offline(pdev: phba->pcidev)) { |
1700 | spin_lock_irq(lock: &phba->hbalock); |
1701 | phba->hba_flag &= ~DEFER_ERATT; |
1702 | spin_unlock_irq(lock: &phba->hbalock); |
1703 | return; |
1704 | } |
1705 | |
1706 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
1707 | "0479 Deferred Adapter Hardware Error " |
1708 | "Data: x%x x%x x%x\n" , |
1709 | phba->work_hs, phba->work_status[0], |
1710 | phba->work_status[1]); |
1711 | |
1712 | spin_lock_irq(lock: &phba->hbalock); |
1713 | psli->sli_flag &= ~LPFC_SLI_ACTIVE; |
1714 | spin_unlock_irq(lock: &phba->hbalock); |
1715 | |
1716 | |
1717 | /* |
1718 | * Firmware stops when it triggred erratt. That could cause the I/Os |
1719 | * dropped by the firmware. Error iocb (I/O) on txcmplq and let the |
1720 | * SCSI layer retry it after re-establishing link. |
1721 | */ |
1722 | lpfc_sli_abort_fcp_rings(phba); |
1723 | |
1724 | /* |
1725 | * There was a firmware error. Take the hba offline and then |
1726 | * attempt to restart it. |
1727 | */ |
1728 | lpfc_offline_prep(phba, LPFC_MBX_WAIT); |
1729 | lpfc_offline(phba); |
1730 | |
1731 | /* Wait for the ER1 bit to clear.*/ |
1732 | while (phba->work_hs & HS_FFER1) { |
1733 | msleep(msecs: 100); |
1734 | if (lpfc_readl(addr: phba->HSregaddr, data: &phba->work_hs)) { |
1735 | phba->work_hs = UNPLUG_ERR ; |
1736 | break; |
1737 | } |
1738 | /* If driver is unloading let the worker thread continue */ |
1739 | if (phba->pport->load_flag & FC_UNLOADING) { |
1740 | phba->work_hs = 0; |
1741 | break; |
1742 | } |
1743 | } |
1744 | |
1745 | /* |
1746 | * This is to ptrotect against a race condition in which |
1747 | * first write to the host attention register clear the |
1748 | * host status register. |
1749 | */ |
1750 | if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING))) |
1751 | phba->work_hs = old_host_status & ~HS_FFER1; |
1752 | |
1753 | spin_lock_irq(lock: &phba->hbalock); |
1754 | phba->hba_flag &= ~DEFER_ERATT; |
1755 | spin_unlock_irq(lock: &phba->hbalock); |
1756 | phba->work_status[0] = readl(addr: phba->MBslimaddr + 0xa8); |
1757 | phba->work_status[1] = readl(addr: phba->MBslimaddr + 0xac); |
1758 | } |
1759 | |
1760 | static void |
1761 | lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba) |
1762 | { |
1763 | struct lpfc_board_event_header board_event; |
1764 | struct Scsi_Host *shost; |
1765 | |
1766 | board_event.event_type = FC_REG_BOARD_EVENT; |
1767 | board_event.subcategory = LPFC_EVENT_PORTINTERR; |
1768 | shost = lpfc_shost_from_vport(vport: phba->pport); |
1769 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
1770 | data_len: sizeof(board_event), |
1771 | data_buf: (char *) &board_event, |
1772 | LPFC_NL_VENDOR_ID); |
1773 | } |
1774 | |
1775 | /** |
1776 | * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler |
1777 | * @phba: pointer to lpfc hba data structure. |
1778 | * |
1779 | * This routine is invoked to handle the following HBA hardware error |
1780 | * conditions: |
1781 | * 1 - HBA error attention interrupt |
1782 | * 2 - DMA ring index out of range |
1783 | * 3 - Mailbox command came back as unknown |
1784 | **/ |
1785 | static void |
1786 | lpfc_handle_eratt_s3(struct lpfc_hba *phba) |
1787 | { |
1788 | struct lpfc_vport *vport = phba->pport; |
1789 | struct lpfc_sli *psli = &phba->sli; |
1790 | uint32_t event_data; |
1791 | unsigned long temperature; |
1792 | struct temp_event temp_event_data; |
1793 | struct Scsi_Host *shost; |
1794 | |
1795 | /* If the pci channel is offline, ignore possible errors, |
1796 | * since we cannot communicate with the pci card anyway. |
1797 | */ |
1798 | if (pci_channel_offline(pdev: phba->pcidev)) { |
1799 | spin_lock_irq(lock: &phba->hbalock); |
1800 | phba->hba_flag &= ~DEFER_ERATT; |
1801 | spin_unlock_irq(lock: &phba->hbalock); |
1802 | return; |
1803 | } |
1804 | |
1805 | /* If resets are disabled then leave the HBA alone and return */ |
1806 | if (!phba->cfg_enable_hba_reset) |
1807 | return; |
1808 | |
1809 | /* Send an internal error event to mgmt application */ |
1810 | lpfc_board_errevt_to_mgmt(phba); |
1811 | |
1812 | if (phba->hba_flag & DEFER_ERATT) |
1813 | lpfc_handle_deferred_eratt(phba); |
1814 | |
1815 | if ((phba->work_hs & HS_FFER6) || (phba->work_hs & HS_FFER8)) { |
1816 | if (phba->work_hs & HS_FFER6) |
1817 | /* Re-establishing Link */ |
1818 | lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, |
1819 | "1301 Re-establishing Link " |
1820 | "Data: x%x x%x x%x\n" , |
1821 | phba->work_hs, phba->work_status[0], |
1822 | phba->work_status[1]); |
1823 | if (phba->work_hs & HS_FFER8) |
1824 | /* Device Zeroization */ |
1825 | lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, |
1826 | "2861 Host Authentication device " |
1827 | "zeroization Data:x%x x%x x%x\n" , |
1828 | phba->work_hs, phba->work_status[0], |
1829 | phba->work_status[1]); |
1830 | |
1831 | spin_lock_irq(lock: &phba->hbalock); |
1832 | psli->sli_flag &= ~LPFC_SLI_ACTIVE; |
1833 | spin_unlock_irq(lock: &phba->hbalock); |
1834 | |
1835 | /* |
1836 | * Firmware stops when it triggled erratt with HS_FFER6. |
1837 | * That could cause the I/Os dropped by the firmware. |
1838 | * Error iocb (I/O) on txcmplq and let the SCSI layer |
1839 | * retry it after re-establishing link. |
1840 | */ |
1841 | lpfc_sli_abort_fcp_rings(phba); |
1842 | |
1843 | /* |
1844 | * There was a firmware error. Take the hba offline and then |
1845 | * attempt to restart it. |
1846 | */ |
1847 | lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); |
1848 | lpfc_offline(phba); |
1849 | lpfc_sli_brdrestart(phba); |
1850 | if (lpfc_online(phba) == 0) { /* Initialize the HBA */ |
1851 | lpfc_unblock_mgmt_io(phba); |
1852 | return; |
1853 | } |
1854 | lpfc_unblock_mgmt_io(phba); |
1855 | } else if (phba->work_hs & HS_CRIT_TEMP) { |
1856 | temperature = readl(addr: phba->MBslimaddr + TEMPERATURE_OFFSET); |
1857 | temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; |
1858 | temp_event_data.event_code = LPFC_CRIT_TEMP; |
1859 | temp_event_data.data = (uint32_t)temperature; |
1860 | |
1861 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
1862 | "0406 Adapter maximum temperature exceeded " |
1863 | "(%ld), taking this port offline " |
1864 | "Data: x%x x%x x%x\n" , |
1865 | temperature, phba->work_hs, |
1866 | phba->work_status[0], phba->work_status[1]); |
1867 | |
1868 | shost = lpfc_shost_from_vport(vport: phba->pport); |
1869 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
1870 | data_len: sizeof(temp_event_data), |
1871 | data_buf: (char *) &temp_event_data, |
1872 | SCSI_NL_VID_TYPE_PCI |
1873 | | PCI_VENDOR_ID_EMULEX); |
1874 | |
1875 | spin_lock_irq(lock: &phba->hbalock); |
1876 | phba->over_temp_state = HBA_OVER_TEMP; |
1877 | spin_unlock_irq(lock: &phba->hbalock); |
1878 | lpfc_offline_eratt(phba); |
1879 | |
1880 | } else { |
1881 | /* The if clause above forces this code path when the status |
1882 | * failure is a value other than FFER6. Do not call the offline |
1883 | * twice. This is the adapter hardware error path. |
1884 | */ |
1885 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
1886 | "0457 Adapter Hardware Error " |
1887 | "Data: x%x x%x x%x\n" , |
1888 | phba->work_hs, |
1889 | phba->work_status[0], phba->work_status[1]); |
1890 | |
1891 | event_data = FC_REG_DUMP_EVENT; |
1892 | shost = lpfc_shost_from_vport(vport); |
1893 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
1894 | data_len: sizeof(event_data), data_buf: (char *) &event_data, |
1895 | SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); |
1896 | |
1897 | lpfc_offline_eratt(phba); |
1898 | } |
1899 | return; |
1900 | } |
1901 | |
1902 | /** |
1903 | * lpfc_sli4_port_sta_fn_reset - The SLI4 function reset due to port status reg |
1904 | * @phba: pointer to lpfc hba data structure. |
1905 | * @mbx_action: flag for mailbox shutdown action. |
1906 | * @en_rn_msg: send reset/port recovery message. |
1907 | * This routine is invoked to perform an SLI4 port PCI function reset in |
1908 | * response to port status register polling attention. It waits for port |
1909 | * status register (ERR, RDY, RN) bits before proceeding with function reset. |
1910 | * During this process, interrupt vectors are freed and later requested |
1911 | * for handling possible port resource change. |
1912 | **/ |
1913 | static int |
1914 | lpfc_sli4_port_sta_fn_reset(struct lpfc_hba *phba, int mbx_action, |
1915 | bool en_rn_msg) |
1916 | { |
1917 | int rc; |
1918 | uint32_t intr_mode; |
1919 | LPFC_MBOXQ_t *mboxq; |
1920 | |
1921 | if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >= |
1922 | LPFC_SLI_INTF_IF_TYPE_2) { |
1923 | /* |
1924 | * On error status condition, driver need to wait for port |
1925 | * ready before performing reset. |
1926 | */ |
1927 | rc = lpfc_sli4_pdev_status_reg_wait(phba); |
1928 | if (rc) |
1929 | return rc; |
1930 | } |
1931 | |
1932 | /* need reset: attempt for port recovery */ |
1933 | if (en_rn_msg) |
1934 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
1935 | "2887 Reset Needed: Attempting Port " |
1936 | "Recovery...\n" ); |
1937 | |
1938 | /* If we are no wait, the HBA has been reset and is not |
1939 | * functional, thus we should clear |
1940 | * (LPFC_SLI_ACTIVE | LPFC_SLI_MBOX_ACTIVE) flags. |
1941 | */ |
1942 | if (mbx_action == LPFC_MBX_NO_WAIT) { |
1943 | spin_lock_irq(lock: &phba->hbalock); |
1944 | phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE; |
1945 | if (phba->sli.mbox_active) { |
1946 | mboxq = phba->sli.mbox_active; |
1947 | mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; |
1948 | __lpfc_mbox_cmpl_put(phba, mboxq); |
1949 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
1950 | phba->sli.mbox_active = NULL; |
1951 | } |
1952 | spin_unlock_irq(lock: &phba->hbalock); |
1953 | } |
1954 | |
1955 | lpfc_offline_prep(phba, mbx_action); |
1956 | lpfc_sli_flush_io_rings(phba); |
1957 | lpfc_offline(phba); |
1958 | /* release interrupt for possible resource change */ |
1959 | lpfc_sli4_disable_intr(phba); |
1960 | rc = lpfc_sli_brdrestart(phba); |
1961 | if (rc) { |
1962 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
1963 | "6309 Failed to restart board\n" ); |
1964 | return rc; |
1965 | } |
1966 | /* request and enable interrupt */ |
1967 | intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode); |
1968 | if (intr_mode == LPFC_INTR_ERROR) { |
1969 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
1970 | "3175 Failed to enable interrupt\n" ); |
1971 | return -EIO; |
1972 | } |
1973 | phba->intr_mode = intr_mode; |
1974 | rc = lpfc_online(phba); |
1975 | if (rc == 0) |
1976 | lpfc_unblock_mgmt_io(phba); |
1977 | |
1978 | return rc; |
1979 | } |
1980 | |
1981 | /** |
1982 | * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler |
1983 | * @phba: pointer to lpfc hba data structure. |
1984 | * |
1985 | * This routine is invoked to handle the SLI4 HBA hardware error attention |
1986 | * conditions. |
1987 | **/ |
1988 | static void |
1989 | lpfc_handle_eratt_s4(struct lpfc_hba *phba) |
1990 | { |
1991 | struct lpfc_vport *vport = phba->pport; |
1992 | uint32_t event_data; |
1993 | struct Scsi_Host *shost; |
1994 | uint32_t if_type; |
1995 | struct lpfc_register portstat_reg = {0}; |
1996 | uint32_t reg_err1, reg_err2; |
1997 | uint32_t uerrlo_reg, uemasklo_reg; |
1998 | uint32_t smphr_port_status = 0, pci_rd_rc1, pci_rd_rc2; |
1999 | bool en_rn_msg = true; |
2000 | struct temp_event temp_event_data; |
2001 | struct lpfc_register portsmphr_reg; |
2002 | int rc, i; |
2003 | |
2004 | /* If the pci channel is offline, ignore possible errors, since |
2005 | * we cannot communicate with the pci card anyway. |
2006 | */ |
2007 | if (pci_channel_offline(pdev: phba->pcidev)) { |
2008 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2009 | "3166 pci channel is offline\n" ); |
2010 | lpfc_sli_flush_io_rings(phba); |
2011 | return; |
2012 | } |
2013 | |
2014 | memset(&portsmphr_reg, 0, sizeof(portsmphr_reg)); |
2015 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
2016 | switch (if_type) { |
2017 | case LPFC_SLI_INTF_IF_TYPE_0: |
2018 | pci_rd_rc1 = lpfc_readl( |
2019 | addr: phba->sli4_hba.u.if_type0.UERRLOregaddr, |
2020 | data: &uerrlo_reg); |
2021 | pci_rd_rc2 = lpfc_readl( |
2022 | addr: phba->sli4_hba.u.if_type0.UEMASKLOregaddr, |
2023 | data: &uemasklo_reg); |
2024 | /* consider PCI bus read error as pci_channel_offline */ |
2025 | if (pci_rd_rc1 == -EIO && pci_rd_rc2 == -EIO) |
2026 | return; |
2027 | if (!(phba->hba_flag & HBA_RECOVERABLE_UE)) { |
2028 | lpfc_sli4_offline_eratt(phba); |
2029 | return; |
2030 | } |
2031 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2032 | "7623 Checking UE recoverable" ); |
2033 | |
2034 | for (i = 0; i < phba->sli4_hba.ue_to_sr / 1000; i++) { |
2035 | if (lpfc_readl(addr: phba->sli4_hba.PSMPHRregaddr, |
2036 | data: &portsmphr_reg.word0)) |
2037 | continue; |
2038 | |
2039 | smphr_port_status = bf_get(lpfc_port_smphr_port_status, |
2040 | &portsmphr_reg); |
2041 | if ((smphr_port_status & LPFC_PORT_SEM_MASK) == |
2042 | LPFC_PORT_SEM_UE_RECOVERABLE) |
2043 | break; |
2044 | /*Sleep for 1Sec, before checking SEMAPHORE */ |
2045 | msleep(msecs: 1000); |
2046 | } |
2047 | |
2048 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2049 | "4827 smphr_port_status x%x : Waited %dSec" , |
2050 | smphr_port_status, i); |
2051 | |
2052 | /* Recoverable UE, reset the HBA device */ |
2053 | if ((smphr_port_status & LPFC_PORT_SEM_MASK) == |
2054 | LPFC_PORT_SEM_UE_RECOVERABLE) { |
2055 | for (i = 0; i < 20; i++) { |
2056 | msleep(msecs: 1000); |
2057 | if (!lpfc_readl(addr: phba->sli4_hba.PSMPHRregaddr, |
2058 | data: &portsmphr_reg.word0) && |
2059 | (LPFC_POST_STAGE_PORT_READY == |
2060 | bf_get(lpfc_port_smphr_port_status, |
2061 | &portsmphr_reg))) { |
2062 | rc = lpfc_sli4_port_sta_fn_reset(phba, |
2063 | LPFC_MBX_NO_WAIT, en_rn_msg); |
2064 | if (rc == 0) |
2065 | return; |
2066 | lpfc_printf_log(phba, KERN_ERR, |
2067 | LOG_TRACE_EVENT, |
2068 | "4215 Failed to recover UE" ); |
2069 | break; |
2070 | } |
2071 | } |
2072 | } |
2073 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2074 | "7624 Firmware not ready: Failing UE recovery," |
2075 | " waited %dSec" , i); |
2076 | phba->link_state = LPFC_HBA_ERROR; |
2077 | break; |
2078 | |
2079 | case LPFC_SLI_INTF_IF_TYPE_2: |
2080 | case LPFC_SLI_INTF_IF_TYPE_6: |
2081 | pci_rd_rc1 = lpfc_readl( |
2082 | addr: phba->sli4_hba.u.if_type2.STATUSregaddr, |
2083 | data: &portstat_reg.word0); |
2084 | /* consider PCI bus read error as pci_channel_offline */ |
2085 | if (pci_rd_rc1 == -EIO) { |
2086 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2087 | "3151 PCI bus read access failure: x%x\n" , |
2088 | readl(phba->sli4_hba.u.if_type2.STATUSregaddr)); |
2089 | lpfc_sli4_offline_eratt(phba); |
2090 | return; |
2091 | } |
2092 | reg_err1 = readl(addr: phba->sli4_hba.u.if_type2.ERR1regaddr); |
2093 | reg_err2 = readl(addr: phba->sli4_hba.u.if_type2.ERR2regaddr); |
2094 | if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) { |
2095 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2096 | "2889 Port Overtemperature event, " |
2097 | "taking port offline Data: x%x x%x\n" , |
2098 | reg_err1, reg_err2); |
2099 | |
2100 | phba->sfp_alarm |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE; |
2101 | temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; |
2102 | temp_event_data.event_code = LPFC_CRIT_TEMP; |
2103 | temp_event_data.data = 0xFFFFFFFF; |
2104 | |
2105 | shost = lpfc_shost_from_vport(vport: phba->pport); |
2106 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
2107 | data_len: sizeof(temp_event_data), |
2108 | data_buf: (char *)&temp_event_data, |
2109 | SCSI_NL_VID_TYPE_PCI |
2110 | | PCI_VENDOR_ID_EMULEX); |
2111 | |
2112 | spin_lock_irq(lock: &phba->hbalock); |
2113 | phba->over_temp_state = HBA_OVER_TEMP; |
2114 | spin_unlock_irq(lock: &phba->hbalock); |
2115 | lpfc_sli4_offline_eratt(phba); |
2116 | return; |
2117 | } |
2118 | if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && |
2119 | reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) { |
2120 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
2121 | "3143 Port Down: Firmware Update " |
2122 | "Detected\n" ); |
2123 | en_rn_msg = false; |
2124 | } else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && |
2125 | reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) |
2126 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
2127 | "3144 Port Down: Debug Dump\n" ); |
2128 | else if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && |
2129 | reg_err2 == SLIPORT_ERR2_REG_FUNC_PROVISON) |
2130 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2131 | "3145 Port Down: Provisioning\n" ); |
2132 | |
2133 | /* If resets are disabled then leave the HBA alone and return */ |
2134 | if (!phba->cfg_enable_hba_reset) |
2135 | return; |
2136 | |
2137 | /* Check port status register for function reset */ |
2138 | rc = lpfc_sli4_port_sta_fn_reset(phba, LPFC_MBX_NO_WAIT, |
2139 | en_rn_msg); |
2140 | if (rc == 0) { |
2141 | /* don't report event on forced debug dump */ |
2142 | if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && |
2143 | reg_err2 == SLIPORT_ERR2_REG_FORCED_DUMP) |
2144 | return; |
2145 | else |
2146 | break; |
2147 | } |
2148 | /* fall through for not able to recover */ |
2149 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2150 | "3152 Unrecoverable error\n" ); |
2151 | lpfc_sli4_offline_eratt(phba); |
2152 | break; |
2153 | case LPFC_SLI_INTF_IF_TYPE_1: |
2154 | default: |
2155 | break; |
2156 | } |
2157 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
2158 | "3123 Report dump event to upper layer\n" ); |
2159 | /* Send an internal error event to mgmt application */ |
2160 | lpfc_board_errevt_to_mgmt(phba); |
2161 | |
2162 | event_data = FC_REG_DUMP_EVENT; |
2163 | shost = lpfc_shost_from_vport(vport); |
2164 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
2165 | data_len: sizeof(event_data), data_buf: (char *) &event_data, |
2166 | SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX); |
2167 | } |
2168 | |
2169 | /** |
2170 | * lpfc_handle_eratt - Wrapper func for handling hba error attention |
2171 | * @phba: pointer to lpfc HBA data structure. |
2172 | * |
2173 | * This routine wraps the actual SLI3 or SLI4 hba error attention handling |
2174 | * routine from the API jump table function pointer from the lpfc_hba struct. |
2175 | * |
2176 | * Return codes |
2177 | * 0 - success. |
2178 | * Any other value - error. |
2179 | **/ |
2180 | void |
2181 | lpfc_handle_eratt(struct lpfc_hba *phba) |
2182 | { |
2183 | (*phba->lpfc_handle_eratt)(phba); |
2184 | } |
2185 | |
2186 | /** |
2187 | * lpfc_handle_latt - The HBA link event handler |
2188 | * @phba: pointer to lpfc hba data structure. |
2189 | * |
2190 | * This routine is invoked from the worker thread to handle a HBA host |
2191 | * attention link event. SLI3 only. |
2192 | **/ |
2193 | void |
2194 | lpfc_handle_latt(struct lpfc_hba *phba) |
2195 | { |
2196 | struct lpfc_vport *vport = phba->pport; |
2197 | struct lpfc_sli *psli = &phba->sli; |
2198 | LPFC_MBOXQ_t *pmb; |
2199 | volatile uint32_t control; |
2200 | int rc = 0; |
2201 | |
2202 | pmb = (LPFC_MBOXQ_t *)mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
2203 | if (!pmb) { |
2204 | rc = 1; |
2205 | goto lpfc_handle_latt_err_exit; |
2206 | } |
2207 | |
2208 | rc = lpfc_mbox_rsrc_prep(phba, mbox: pmb); |
2209 | if (rc) { |
2210 | rc = 2; |
2211 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
2212 | goto lpfc_handle_latt_err_exit; |
2213 | } |
2214 | |
2215 | /* Cleanup any outstanding ELS commands */ |
2216 | lpfc_els_flush_all_cmd(phba); |
2217 | psli->slistat.link_event++; |
2218 | lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf); |
2219 | pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology; |
2220 | pmb->vport = vport; |
2221 | /* Block ELS IOCBs until we have processed this mbox command */ |
2222 | phba->sli.sli3_ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT; |
2223 | rc = lpfc_sli_issue_mbox (phba, pmb, MBX_NOWAIT); |
2224 | if (rc == MBX_NOT_FINISHED) { |
2225 | rc = 4; |
2226 | goto lpfc_handle_latt_free_mbuf; |
2227 | } |
2228 | |
2229 | /* Clear Link Attention in HA REG */ |
2230 | spin_lock_irq(lock: &phba->hbalock); |
2231 | writel(HA_LATT, addr: phba->HAregaddr); |
2232 | readl(addr: phba->HAregaddr); /* flush */ |
2233 | spin_unlock_irq(lock: &phba->hbalock); |
2234 | |
2235 | return; |
2236 | |
2237 | lpfc_handle_latt_free_mbuf: |
2238 | phba->sli.sli3_ring[LPFC_ELS_RING].flag &= ~LPFC_STOP_IOCB_EVENT; |
2239 | lpfc_mbox_rsrc_cleanup(phba, mbox: pmb, locked: MBOX_THD_UNLOCKED); |
2240 | lpfc_handle_latt_err_exit: |
2241 | /* Enable Link attention interrupts */ |
2242 | spin_lock_irq(lock: &phba->hbalock); |
2243 | psli->sli_flag |= LPFC_PROCESS_LA; |
2244 | control = readl(addr: phba->HCregaddr); |
2245 | control |= HC_LAINT_ENA; |
2246 | writel(val: control, addr: phba->HCregaddr); |
2247 | readl(addr: phba->HCregaddr); /* flush */ |
2248 | |
2249 | /* Clear Link Attention in HA REG */ |
2250 | writel(HA_LATT, addr: phba->HAregaddr); |
2251 | readl(addr: phba->HAregaddr); /* flush */ |
2252 | spin_unlock_irq(lock: &phba->hbalock); |
2253 | lpfc_linkdown(phba); |
2254 | phba->link_state = LPFC_HBA_ERROR; |
2255 | |
2256 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
2257 | "0300 LATT: Cannot issue READ_LA: Data:%d\n" , rc); |
2258 | |
2259 | return; |
2260 | } |
2261 | |
2262 | static void |
2263 | lpfc_fill_vpd(struct lpfc_hba *phba, uint8_t *vpd, int length, int *pindex) |
2264 | { |
2265 | int i, j; |
2266 | |
2267 | while (length > 0) { |
2268 | /* Look for Serial Number */ |
2269 | if ((vpd[*pindex] == 'S') && (vpd[*pindex + 1] == 'N')) { |
2270 | *pindex += 2; |
2271 | i = vpd[*pindex]; |
2272 | *pindex += 1; |
2273 | j = 0; |
2274 | length -= (3+i); |
2275 | while (i--) { |
2276 | phba->SerialNumber[j++] = vpd[(*pindex)++]; |
2277 | if (j == 31) |
2278 | break; |
2279 | } |
2280 | phba->SerialNumber[j] = 0; |
2281 | continue; |
2282 | } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '1')) { |
2283 | phba->vpd_flag |= VPD_MODEL_DESC; |
2284 | *pindex += 2; |
2285 | i = vpd[*pindex]; |
2286 | *pindex += 1; |
2287 | j = 0; |
2288 | length -= (3+i); |
2289 | while (i--) { |
2290 | phba->ModelDesc[j++] = vpd[(*pindex)++]; |
2291 | if (j == 255) |
2292 | break; |
2293 | } |
2294 | phba->ModelDesc[j] = 0; |
2295 | continue; |
2296 | } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '2')) { |
2297 | phba->vpd_flag |= VPD_MODEL_NAME; |
2298 | *pindex += 2; |
2299 | i = vpd[*pindex]; |
2300 | *pindex += 1; |
2301 | j = 0; |
2302 | length -= (3+i); |
2303 | while (i--) { |
2304 | phba->ModelName[j++] = vpd[(*pindex)++]; |
2305 | if (j == 79) |
2306 | break; |
2307 | } |
2308 | phba->ModelName[j] = 0; |
2309 | continue; |
2310 | } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '3')) { |
2311 | phba->vpd_flag |= VPD_PROGRAM_TYPE; |
2312 | *pindex += 2; |
2313 | i = vpd[*pindex]; |
2314 | *pindex += 1; |
2315 | j = 0; |
2316 | length -= (3+i); |
2317 | while (i--) { |
2318 | phba->ProgramType[j++] = vpd[(*pindex)++]; |
2319 | if (j == 255) |
2320 | break; |
2321 | } |
2322 | phba->ProgramType[j] = 0; |
2323 | continue; |
2324 | } else if ((vpd[*pindex] == 'V') && (vpd[*pindex + 1] == '4')) { |
2325 | phba->vpd_flag |= VPD_PORT; |
2326 | *pindex += 2; |
2327 | i = vpd[*pindex]; |
2328 | *pindex += 1; |
2329 | j = 0; |
2330 | length -= (3 + i); |
2331 | while (i--) { |
2332 | if ((phba->sli_rev == LPFC_SLI_REV4) && |
2333 | (phba->sli4_hba.pport_name_sta == |
2334 | LPFC_SLI4_PPNAME_GET)) { |
2335 | j++; |
2336 | (*pindex)++; |
2337 | } else |
2338 | phba->Port[j++] = vpd[(*pindex)++]; |
2339 | if (j == 19) |
2340 | break; |
2341 | } |
2342 | if ((phba->sli_rev != LPFC_SLI_REV4) || |
2343 | (phba->sli4_hba.pport_name_sta == |
2344 | LPFC_SLI4_PPNAME_NON)) |
2345 | phba->Port[j] = 0; |
2346 | continue; |
2347 | } else { |
2348 | *pindex += 2; |
2349 | i = vpd[*pindex]; |
2350 | *pindex += 1; |
2351 | *pindex += i; |
2352 | length -= (3 + i); |
2353 | } |
2354 | } |
2355 | } |
2356 | |
2357 | /** |
2358 | * lpfc_parse_vpd - Parse VPD (Vital Product Data) |
2359 | * @phba: pointer to lpfc hba data structure. |
2360 | * @vpd: pointer to the vital product data. |
2361 | * @len: length of the vital product data in bytes. |
2362 | * |
2363 | * This routine parses the Vital Product Data (VPD). The VPD is treated as |
2364 | * an array of characters. In this routine, the ModelName, ProgramType, and |
2365 | * ModelDesc, etc. fields of the phba data structure will be populated. |
2366 | * |
2367 | * Return codes |
2368 | * 0 - pointer to the VPD passed in is NULL |
2369 | * 1 - success |
2370 | **/ |
2371 | int |
2372 | lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len) |
2373 | { |
2374 | uint8_t lenlo, lenhi; |
2375 | int Length; |
2376 | int i; |
2377 | int finished = 0; |
2378 | int index = 0; |
2379 | |
2380 | if (!vpd) |
2381 | return 0; |
2382 | |
2383 | /* Vital Product */ |
2384 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
2385 | "0455 Vital Product Data: x%x x%x x%x x%x\n" , |
2386 | (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2], |
2387 | (uint32_t) vpd[3]); |
2388 | while (!finished && (index < (len - 4))) { |
2389 | switch (vpd[index]) { |
2390 | case 0x82: |
2391 | case 0x91: |
2392 | index += 1; |
2393 | lenlo = vpd[index]; |
2394 | index += 1; |
2395 | lenhi = vpd[index]; |
2396 | index += 1; |
2397 | i = ((((unsigned short)lenhi) << 8) + lenlo); |
2398 | index += i; |
2399 | break; |
2400 | case 0x90: |
2401 | index += 1; |
2402 | lenlo = vpd[index]; |
2403 | index += 1; |
2404 | lenhi = vpd[index]; |
2405 | index += 1; |
2406 | Length = ((((unsigned short)lenhi) << 8) + lenlo); |
2407 | if (Length > len - index) |
2408 | Length = len - index; |
2409 | |
2410 | lpfc_fill_vpd(phba, vpd, length: Length, pindex: &index); |
2411 | finished = 0; |
2412 | break; |
2413 | case 0x78: |
2414 | finished = 1; |
2415 | break; |
2416 | default: |
2417 | index ++; |
2418 | break; |
2419 | } |
2420 | } |
2421 | |
2422 | return(1); |
2423 | } |
2424 | |
2425 | /** |
2426 | * lpfc_get_atto_model_desc - Retrieve ATTO HBA device model name and description |
2427 | * @phba: pointer to lpfc hba data structure. |
2428 | * @mdp: pointer to the data structure to hold the derived model name. |
2429 | * @descp: pointer to the data structure to hold the derived description. |
2430 | * |
2431 | * This routine retrieves HBA's description based on its registered PCI device |
2432 | * ID. The @descp passed into this function points to an array of 256 chars. It |
2433 | * shall be returned with the model name, maximum speed, and the host bus type. |
2434 | * The @mdp passed into this function points to an array of 80 chars. When the |
2435 | * function returns, the @mdp will be filled with the model name. |
2436 | **/ |
2437 | static void |
2438 | lpfc_get_atto_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) |
2439 | { |
2440 | uint16_t sub_dev_id = phba->pcidev->subsystem_device; |
2441 | char *model = "<Unknown>" ; |
2442 | int tbolt = 0; |
2443 | |
2444 | switch (sub_dev_id) { |
2445 | case PCI_DEVICE_ID_CLRY_161E: |
2446 | model = "161E" ; |
2447 | break; |
2448 | case PCI_DEVICE_ID_CLRY_162E: |
2449 | model = "162E" ; |
2450 | break; |
2451 | case PCI_DEVICE_ID_CLRY_164E: |
2452 | model = "164E" ; |
2453 | break; |
2454 | case PCI_DEVICE_ID_CLRY_161P: |
2455 | model = "161P" ; |
2456 | break; |
2457 | case PCI_DEVICE_ID_CLRY_162P: |
2458 | model = "162P" ; |
2459 | break; |
2460 | case PCI_DEVICE_ID_CLRY_164P: |
2461 | model = "164P" ; |
2462 | break; |
2463 | case PCI_DEVICE_ID_CLRY_321E: |
2464 | model = "321E" ; |
2465 | break; |
2466 | case PCI_DEVICE_ID_CLRY_322E: |
2467 | model = "322E" ; |
2468 | break; |
2469 | case PCI_DEVICE_ID_CLRY_324E: |
2470 | model = "324E" ; |
2471 | break; |
2472 | case PCI_DEVICE_ID_CLRY_321P: |
2473 | model = "321P" ; |
2474 | break; |
2475 | case PCI_DEVICE_ID_CLRY_322P: |
2476 | model = "322P" ; |
2477 | break; |
2478 | case PCI_DEVICE_ID_CLRY_324P: |
2479 | model = "324P" ; |
2480 | break; |
2481 | case PCI_DEVICE_ID_TLFC_2XX2: |
2482 | model = "2XX2" ; |
2483 | tbolt = 1; |
2484 | break; |
2485 | case PCI_DEVICE_ID_TLFC_3162: |
2486 | model = "3162" ; |
2487 | tbolt = 1; |
2488 | break; |
2489 | case PCI_DEVICE_ID_TLFC_3322: |
2490 | model = "3322" ; |
2491 | tbolt = 1; |
2492 | break; |
2493 | default: |
2494 | model = "Unknown" ; |
2495 | break; |
2496 | } |
2497 | |
2498 | if (mdp && mdp[0] == '\0') |
2499 | snprintf(buf: mdp, size: 79, fmt: "%s" , model); |
2500 | |
2501 | if (descp && descp[0] == '\0') |
2502 | snprintf(buf: descp, size: 255, |
2503 | fmt: "ATTO %s%s, Fibre Channel Adapter Initiator, Port %s" , |
2504 | (tbolt) ? "ThunderLink FC " : "Celerity FC-" , |
2505 | model, |
2506 | phba->Port); |
2507 | } |
2508 | |
2509 | /** |
2510 | * lpfc_get_hba_model_desc - Retrieve HBA device model name and description |
2511 | * @phba: pointer to lpfc hba data structure. |
2512 | * @mdp: pointer to the data structure to hold the derived model name. |
2513 | * @descp: pointer to the data structure to hold the derived description. |
2514 | * |
2515 | * This routine retrieves HBA's description based on its registered PCI device |
2516 | * ID. The @descp passed into this function points to an array of 256 chars. It |
2517 | * shall be returned with the model name, maximum speed, and the host bus type. |
2518 | * The @mdp passed into this function points to an array of 80 chars. When the |
2519 | * function returns, the @mdp will be filled with the model name. |
2520 | **/ |
2521 | static void |
2522 | lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) |
2523 | { |
2524 | lpfc_vpd_t *vp; |
2525 | uint16_t dev_id = phba->pcidev->device; |
2526 | int max_speed; |
2527 | int GE = 0; |
2528 | int oneConnect = 0; /* default is not a oneConnect */ |
2529 | struct { |
2530 | char *name; |
2531 | char *bus; |
2532 | char *function; |
2533 | } m = {"<Unknown>" , "" , "" }; |
2534 | |
2535 | if (mdp && mdp[0] != '\0' |
2536 | && descp && descp[0] != '\0') |
2537 | return; |
2538 | |
2539 | if (phba->pcidev->vendor == PCI_VENDOR_ID_ATTO) { |
2540 | lpfc_get_atto_model_desc(phba, mdp, descp); |
2541 | return; |
2542 | } |
2543 | |
2544 | if (phba->lmt & LMT_64Gb) |
2545 | max_speed = 64; |
2546 | else if (phba->lmt & LMT_32Gb) |
2547 | max_speed = 32; |
2548 | else if (phba->lmt & LMT_16Gb) |
2549 | max_speed = 16; |
2550 | else if (phba->lmt & LMT_10Gb) |
2551 | max_speed = 10; |
2552 | else if (phba->lmt & LMT_8Gb) |
2553 | max_speed = 8; |
2554 | else if (phba->lmt & LMT_4Gb) |
2555 | max_speed = 4; |
2556 | else if (phba->lmt & LMT_2Gb) |
2557 | max_speed = 2; |
2558 | else if (phba->lmt & LMT_1Gb) |
2559 | max_speed = 1; |
2560 | else |
2561 | max_speed = 0; |
2562 | |
2563 | vp = &phba->vpd; |
2564 | |
2565 | switch (dev_id) { |
2566 | case PCI_DEVICE_ID_FIREFLY: |
2567 | m = (typeof(m)){"LP6000" , "PCI" , |
2568 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2569 | break; |
2570 | case PCI_DEVICE_ID_SUPERFLY: |
2571 | if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) |
2572 | m = (typeof(m)){"LP7000" , "PCI" , "" }; |
2573 | else |
2574 | m = (typeof(m)){"LP7000E" , "PCI" , "" }; |
2575 | m.function = "Obsolete, Unsupported Fibre Channel Adapter" ; |
2576 | break; |
2577 | case PCI_DEVICE_ID_DRAGONFLY: |
2578 | m = (typeof(m)){"LP8000" , "PCI" , |
2579 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2580 | break; |
2581 | case PCI_DEVICE_ID_CENTAUR: |
2582 | if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) |
2583 | m = (typeof(m)){"LP9002" , "PCI" , "" }; |
2584 | else |
2585 | m = (typeof(m)){"LP9000" , "PCI" , "" }; |
2586 | m.function = "Obsolete, Unsupported Fibre Channel Adapter" ; |
2587 | break; |
2588 | case PCI_DEVICE_ID_RFLY: |
2589 | m = (typeof(m)){"LP952" , "PCI" , |
2590 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2591 | break; |
2592 | case PCI_DEVICE_ID_PEGASUS: |
2593 | m = (typeof(m)){"LP9802" , "PCI-X" , |
2594 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2595 | break; |
2596 | case PCI_DEVICE_ID_THOR: |
2597 | m = (typeof(m)){"LP10000" , "PCI-X" , |
2598 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2599 | break; |
2600 | case PCI_DEVICE_ID_VIPER: |
2601 | m = (typeof(m)){"LPX1000" , "PCI-X" , |
2602 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2603 | break; |
2604 | case PCI_DEVICE_ID_PFLY: |
2605 | m = (typeof(m)){"LP982" , "PCI-X" , |
2606 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2607 | break; |
2608 | case PCI_DEVICE_ID_TFLY: |
2609 | m = (typeof(m)){"LP1050" , "PCI-X" , |
2610 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2611 | break; |
2612 | case PCI_DEVICE_ID_HELIOS: |
2613 | m = (typeof(m)){"LP11000" , "PCI-X2" , |
2614 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2615 | break; |
2616 | case PCI_DEVICE_ID_HELIOS_SCSP: |
2617 | m = (typeof(m)){"LP11000-SP" , "PCI-X2" , |
2618 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2619 | break; |
2620 | case PCI_DEVICE_ID_HELIOS_DCSP: |
2621 | m = (typeof(m)){"LP11002-SP" , "PCI-X2" , |
2622 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2623 | break; |
2624 | case PCI_DEVICE_ID_NEPTUNE: |
2625 | m = (typeof(m)){"LPe1000" , "PCIe" , |
2626 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2627 | break; |
2628 | case PCI_DEVICE_ID_NEPTUNE_SCSP: |
2629 | m = (typeof(m)){"LPe1000-SP" , "PCIe" , |
2630 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2631 | break; |
2632 | case PCI_DEVICE_ID_NEPTUNE_DCSP: |
2633 | m = (typeof(m)){"LPe1002-SP" , "PCIe" , |
2634 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2635 | break; |
2636 | case PCI_DEVICE_ID_BMID: |
2637 | m = (typeof(m)){"LP1150" , "PCI-X2" , "Fibre Channel Adapter" }; |
2638 | break; |
2639 | case PCI_DEVICE_ID_BSMB: |
2640 | m = (typeof(m)){"LP111" , "PCI-X2" , |
2641 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2642 | break; |
2643 | case PCI_DEVICE_ID_ZEPHYR: |
2644 | m = (typeof(m)){"LPe11000" , "PCIe" , "Fibre Channel Adapter" }; |
2645 | break; |
2646 | case PCI_DEVICE_ID_ZEPHYR_SCSP: |
2647 | m = (typeof(m)){"LPe11000" , "PCIe" , "Fibre Channel Adapter" }; |
2648 | break; |
2649 | case PCI_DEVICE_ID_ZEPHYR_DCSP: |
2650 | m = (typeof(m)){"LP2105" , "PCIe" , "FCoE Adapter" }; |
2651 | GE = 1; |
2652 | break; |
2653 | case PCI_DEVICE_ID_ZMID: |
2654 | m = (typeof(m)){"LPe1150" , "PCIe" , "Fibre Channel Adapter" }; |
2655 | break; |
2656 | case PCI_DEVICE_ID_ZSMB: |
2657 | m = (typeof(m)){"LPe111" , "PCIe" , "Fibre Channel Adapter" }; |
2658 | break; |
2659 | case PCI_DEVICE_ID_LP101: |
2660 | m = (typeof(m)){"LP101" , "PCI-X" , |
2661 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2662 | break; |
2663 | case PCI_DEVICE_ID_LP10000S: |
2664 | m = (typeof(m)){"LP10000-S" , "PCI" , |
2665 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2666 | break; |
2667 | case PCI_DEVICE_ID_LP11000S: |
2668 | m = (typeof(m)){"LP11000-S" , "PCI-X2" , |
2669 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2670 | break; |
2671 | case PCI_DEVICE_ID_LPE11000S: |
2672 | m = (typeof(m)){"LPe11000-S" , "PCIe" , |
2673 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2674 | break; |
2675 | case PCI_DEVICE_ID_SAT: |
2676 | m = (typeof(m)){"LPe12000" , "PCIe" , "Fibre Channel Adapter" }; |
2677 | break; |
2678 | case PCI_DEVICE_ID_SAT_MID: |
2679 | m = (typeof(m)){"LPe1250" , "PCIe" , "Fibre Channel Adapter" }; |
2680 | break; |
2681 | case PCI_DEVICE_ID_SAT_SMB: |
2682 | m = (typeof(m)){"LPe121" , "PCIe" , "Fibre Channel Adapter" }; |
2683 | break; |
2684 | case PCI_DEVICE_ID_SAT_DCSP: |
2685 | m = (typeof(m)){"LPe12002-SP" , "PCIe" , "Fibre Channel Adapter" }; |
2686 | break; |
2687 | case PCI_DEVICE_ID_SAT_SCSP: |
2688 | m = (typeof(m)){"LPe12000-SP" , "PCIe" , "Fibre Channel Adapter" }; |
2689 | break; |
2690 | case PCI_DEVICE_ID_SAT_S: |
2691 | m = (typeof(m)){"LPe12000-S" , "PCIe" , "Fibre Channel Adapter" }; |
2692 | break; |
2693 | case PCI_DEVICE_ID_PROTEUS_VF: |
2694 | m = (typeof(m)){"LPev12000" , "PCIe IOV" , |
2695 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2696 | break; |
2697 | case PCI_DEVICE_ID_PROTEUS_PF: |
2698 | m = (typeof(m)){"LPev12000" , "PCIe IOV" , |
2699 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2700 | break; |
2701 | case PCI_DEVICE_ID_PROTEUS_S: |
2702 | m = (typeof(m)){"LPemv12002-S" , "PCIe IOV" , |
2703 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2704 | break; |
2705 | case PCI_DEVICE_ID_TIGERSHARK: |
2706 | oneConnect = 1; |
2707 | m = (typeof(m)){"OCe10100" , "PCIe" , "FCoE" }; |
2708 | break; |
2709 | case PCI_DEVICE_ID_TOMCAT: |
2710 | oneConnect = 1; |
2711 | m = (typeof(m)){"OCe11100" , "PCIe" , "FCoE" }; |
2712 | break; |
2713 | case PCI_DEVICE_ID_FALCON: |
2714 | m = (typeof(m)){"LPSe12002-ML1-E" , "PCIe" , |
2715 | "EmulexSecure Fibre" }; |
2716 | break; |
2717 | case PCI_DEVICE_ID_BALIUS: |
2718 | m = (typeof(m)){"LPVe12002" , "PCIe Shared I/O" , |
2719 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2720 | break; |
2721 | case PCI_DEVICE_ID_LANCER_FC: |
2722 | m = (typeof(m)){"LPe16000" , "PCIe" , "Fibre Channel Adapter" }; |
2723 | break; |
2724 | case PCI_DEVICE_ID_LANCER_FC_VF: |
2725 | m = (typeof(m)){"LPe16000" , "PCIe" , |
2726 | "Obsolete, Unsupported Fibre Channel Adapter" }; |
2727 | break; |
2728 | case PCI_DEVICE_ID_LANCER_FCOE: |
2729 | oneConnect = 1; |
2730 | m = (typeof(m)){"OCe15100" , "PCIe" , "FCoE" }; |
2731 | break; |
2732 | case PCI_DEVICE_ID_LANCER_FCOE_VF: |
2733 | oneConnect = 1; |
2734 | m = (typeof(m)){"OCe15100" , "PCIe" , |
2735 | "Obsolete, Unsupported FCoE" }; |
2736 | break; |
2737 | case PCI_DEVICE_ID_LANCER_G6_FC: |
2738 | m = (typeof(m)){"LPe32000" , "PCIe" , "Fibre Channel Adapter" }; |
2739 | break; |
2740 | case PCI_DEVICE_ID_LANCER_G7_FC: |
2741 | m = (typeof(m)){"LPe36000" , "PCIe" , "Fibre Channel Adapter" }; |
2742 | break; |
2743 | case PCI_DEVICE_ID_LANCER_G7P_FC: |
2744 | m = (typeof(m)){"LPe38000" , "PCIe" , "Fibre Channel Adapter" }; |
2745 | break; |
2746 | case PCI_DEVICE_ID_SKYHAWK: |
2747 | case PCI_DEVICE_ID_SKYHAWK_VF: |
2748 | oneConnect = 1; |
2749 | m = (typeof(m)){"OCe14000" , "PCIe" , "FCoE" }; |
2750 | break; |
2751 | default: |
2752 | m = (typeof(m)){"Unknown" , "" , "" }; |
2753 | break; |
2754 | } |
2755 | |
2756 | if (mdp && mdp[0] == '\0') |
2757 | snprintf(buf: mdp, size: 79,fmt: "%s" , m.name); |
2758 | /* |
2759 | * oneConnect hba requires special processing, they are all initiators |
2760 | * and we put the port number on the end |
2761 | */ |
2762 | if (descp && descp[0] == '\0') { |
2763 | if (oneConnect) |
2764 | snprintf(buf: descp, size: 255, |
2765 | fmt: "Emulex OneConnect %s, %s Initiator %s" , |
2766 | m.name, m.function, |
2767 | phba->Port); |
2768 | else if (max_speed == 0) |
2769 | snprintf(buf: descp, size: 255, |
2770 | fmt: "Emulex %s %s %s" , |
2771 | m.name, m.bus, m.function); |
2772 | else |
2773 | snprintf(buf: descp, size: 255, |
2774 | fmt: "Emulex %s %d%s %s %s" , |
2775 | m.name, max_speed, (GE) ? "GE" : "Gb" , |
2776 | m.bus, m.function); |
2777 | } |
2778 | } |
2779 | |
2780 | /** |
2781 | * lpfc_sli3_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring |
2782 | * @phba: pointer to lpfc hba data structure. |
2783 | * @pring: pointer to a IOCB ring. |
2784 | * @cnt: the number of IOCBs to be posted to the IOCB ring. |
2785 | * |
2786 | * This routine posts a given number of IOCBs with the associated DMA buffer |
2787 | * descriptors specified by the cnt argument to the given IOCB ring. |
2788 | * |
2789 | * Return codes |
2790 | * The number of IOCBs NOT able to be posted to the IOCB ring. |
2791 | **/ |
2792 | int |
2793 | lpfc_sli3_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt) |
2794 | { |
2795 | IOCB_t *icmd; |
2796 | struct lpfc_iocbq *iocb; |
2797 | struct lpfc_dmabuf *mp1, *mp2; |
2798 | |
2799 | cnt += pring->missbufcnt; |
2800 | |
2801 | /* While there are buffers to post */ |
2802 | while (cnt > 0) { |
2803 | /* Allocate buffer for command iocb */ |
2804 | iocb = lpfc_sli_get_iocbq(phba); |
2805 | if (iocb == NULL) { |
2806 | pring->missbufcnt = cnt; |
2807 | return cnt; |
2808 | } |
2809 | icmd = &iocb->iocb; |
2810 | |
2811 | /* 2 buffers can be posted per command */ |
2812 | /* Allocate buffer to post */ |
2813 | mp1 = kmalloc(size: sizeof (struct lpfc_dmabuf), GFP_KERNEL); |
2814 | if (mp1) |
2815 | mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp1->phys); |
2816 | if (!mp1 || !mp1->virt) { |
2817 | kfree(objp: mp1); |
2818 | lpfc_sli_release_iocbq(phba, iocb); |
2819 | pring->missbufcnt = cnt; |
2820 | return cnt; |
2821 | } |
2822 | |
2823 | INIT_LIST_HEAD(list: &mp1->list); |
2824 | /* Allocate buffer to post */ |
2825 | if (cnt > 1) { |
2826 | mp2 = kmalloc(size: sizeof (struct lpfc_dmabuf), GFP_KERNEL); |
2827 | if (mp2) |
2828 | mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI, |
2829 | &mp2->phys); |
2830 | if (!mp2 || !mp2->virt) { |
2831 | kfree(objp: mp2); |
2832 | lpfc_mbuf_free(phba, mp1->virt, mp1->phys); |
2833 | kfree(objp: mp1); |
2834 | lpfc_sli_release_iocbq(phba, iocb); |
2835 | pring->missbufcnt = cnt; |
2836 | return cnt; |
2837 | } |
2838 | |
2839 | INIT_LIST_HEAD(list: &mp2->list); |
2840 | } else { |
2841 | mp2 = NULL; |
2842 | } |
2843 | |
2844 | icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys); |
2845 | icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys); |
2846 | icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE; |
2847 | icmd->ulpBdeCount = 1; |
2848 | cnt--; |
2849 | if (mp2) { |
2850 | icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys); |
2851 | icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys); |
2852 | icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE; |
2853 | cnt--; |
2854 | icmd->ulpBdeCount = 2; |
2855 | } |
2856 | |
2857 | icmd->ulpCommand = CMD_QUE_RING_BUF64_CN; |
2858 | icmd->ulpLe = 1; |
2859 | |
2860 | if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) == |
2861 | IOCB_ERROR) { |
2862 | lpfc_mbuf_free(phba, mp1->virt, mp1->phys); |
2863 | kfree(objp: mp1); |
2864 | cnt++; |
2865 | if (mp2) { |
2866 | lpfc_mbuf_free(phba, mp2->virt, mp2->phys); |
2867 | kfree(objp: mp2); |
2868 | cnt++; |
2869 | } |
2870 | lpfc_sli_release_iocbq(phba, iocb); |
2871 | pring->missbufcnt = cnt; |
2872 | return cnt; |
2873 | } |
2874 | lpfc_sli_ringpostbuf_put(phba, pring, mp1); |
2875 | if (mp2) |
2876 | lpfc_sli_ringpostbuf_put(phba, pring, mp2); |
2877 | } |
2878 | pring->missbufcnt = 0; |
2879 | return 0; |
2880 | } |
2881 | |
2882 | /** |
2883 | * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring |
2884 | * @phba: pointer to lpfc hba data structure. |
2885 | * |
2886 | * This routine posts initial receive IOCB buffers to the ELS ring. The |
2887 | * current number of initial IOCB buffers specified by LPFC_BUF_RING0 is |
2888 | * set to 64 IOCBs. SLI3 only. |
2889 | * |
2890 | * Return codes |
2891 | * 0 - success (currently always success) |
2892 | **/ |
2893 | static int |
2894 | lpfc_post_rcv_buf(struct lpfc_hba *phba) |
2895 | { |
2896 | struct lpfc_sli *psli = &phba->sli; |
2897 | |
2898 | /* Ring 0, ELS / CT buffers */ |
2899 | lpfc_sli3_post_buffer(phba, pring: &psli->sli3_ring[LPFC_ELS_RING], LPFC_BUF_RING0); |
2900 | /* Ring 2 - FCP no buffers needed */ |
2901 | |
2902 | return 0; |
2903 | } |
2904 | |
2905 | #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) |
2906 | |
2907 | /** |
2908 | * lpfc_sha_init - Set up initial array of hash table entries |
2909 | * @HashResultPointer: pointer to an array as hash table. |
2910 | * |
2911 | * This routine sets up the initial values to the array of hash table entries |
2912 | * for the LC HBAs. |
2913 | **/ |
2914 | static void |
2915 | lpfc_sha_init(uint32_t * HashResultPointer) |
2916 | { |
2917 | HashResultPointer[0] = 0x67452301; |
2918 | HashResultPointer[1] = 0xEFCDAB89; |
2919 | HashResultPointer[2] = 0x98BADCFE; |
2920 | HashResultPointer[3] = 0x10325476; |
2921 | HashResultPointer[4] = 0xC3D2E1F0; |
2922 | } |
2923 | |
2924 | /** |
2925 | * lpfc_sha_iterate - Iterate initial hash table with the working hash table |
2926 | * @HashResultPointer: pointer to an initial/result hash table. |
2927 | * @HashWorkingPointer: pointer to an working hash table. |
2928 | * |
2929 | * This routine iterates an initial hash table pointed by @HashResultPointer |
2930 | * with the values from the working hash table pointeed by @HashWorkingPointer. |
2931 | * The results are putting back to the initial hash table, returned through |
2932 | * the @HashResultPointer as the result hash table. |
2933 | **/ |
2934 | static void |
2935 | lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) |
2936 | { |
2937 | int t; |
2938 | uint32_t TEMP; |
2939 | uint32_t A, B, C, D, E; |
2940 | t = 16; |
2941 | do { |
2942 | HashWorkingPointer[t] = |
2943 | S(1, |
2944 | HashWorkingPointer[t - 3] ^ HashWorkingPointer[t - |
2945 | 8] ^ |
2946 | HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]); |
2947 | } while (++t <= 79); |
2948 | t = 0; |
2949 | A = HashResultPointer[0]; |
2950 | B = HashResultPointer[1]; |
2951 | C = HashResultPointer[2]; |
2952 | D = HashResultPointer[3]; |
2953 | E = HashResultPointer[4]; |
2954 | |
2955 | do { |
2956 | if (t < 20) { |
2957 | TEMP = ((B & C) | ((~B) & D)) + 0x5A827999; |
2958 | } else if (t < 40) { |
2959 | TEMP = (B ^ C ^ D) + 0x6ED9EBA1; |
2960 | } else if (t < 60) { |
2961 | TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC; |
2962 | } else { |
2963 | TEMP = (B ^ C ^ D) + 0xCA62C1D6; |
2964 | } |
2965 | TEMP += S(5, A) + E + HashWorkingPointer[t]; |
2966 | E = D; |
2967 | D = C; |
2968 | C = S(30, B); |
2969 | B = A; |
2970 | A = TEMP; |
2971 | } while (++t <= 79); |
2972 | |
2973 | HashResultPointer[0] += A; |
2974 | HashResultPointer[1] += B; |
2975 | HashResultPointer[2] += C; |
2976 | HashResultPointer[3] += D; |
2977 | HashResultPointer[4] += E; |
2978 | |
2979 | } |
2980 | |
2981 | /** |
2982 | * lpfc_challenge_key - Create challenge key based on WWPN of the HBA |
2983 | * @RandomChallenge: pointer to the entry of host challenge random number array. |
2984 | * @HashWorking: pointer to the entry of the working hash array. |
2985 | * |
2986 | * This routine calculates the working hash array referred by @HashWorking |
2987 | * from the challenge random numbers associated with the host, referred by |
2988 | * @RandomChallenge. The result is put into the entry of the working hash |
2989 | * array and returned by reference through @HashWorking. |
2990 | **/ |
2991 | static void |
2992 | lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) |
2993 | { |
2994 | *HashWorking = (*RandomChallenge ^ *HashWorking); |
2995 | } |
2996 | |
2997 | /** |
2998 | * lpfc_hba_init - Perform special handling for LC HBA initialization |
2999 | * @phba: pointer to lpfc hba data structure. |
3000 | * @hbainit: pointer to an array of unsigned 32-bit integers. |
3001 | * |
3002 | * This routine performs the special handling for LC HBA initialization. |
3003 | **/ |
3004 | void |
3005 | lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) |
3006 | { |
3007 | int t; |
3008 | uint32_t *HashWorking; |
3009 | uint32_t *pwwnn = (uint32_t *) phba->wwnn; |
3010 | |
3011 | HashWorking = kcalloc(n: 80, size: sizeof(uint32_t), GFP_KERNEL); |
3012 | if (!HashWorking) |
3013 | return; |
3014 | |
3015 | HashWorking[0] = HashWorking[78] = *pwwnn++; |
3016 | HashWorking[1] = HashWorking[79] = *pwwnn; |
3017 | |
3018 | for (t = 0; t < 7; t++) |
3019 | lpfc_challenge_key(RandomChallenge: phba->RandomData + t, HashWorking: HashWorking + t); |
3020 | |
3021 | lpfc_sha_init(HashResultPointer: hbainit); |
3022 | lpfc_sha_iterate(HashResultPointer: hbainit, HashWorkingPointer: HashWorking); |
3023 | kfree(objp: HashWorking); |
3024 | } |
3025 | |
3026 | /** |
3027 | * lpfc_cleanup - Performs vport cleanups before deleting a vport |
3028 | * @vport: pointer to a virtual N_Port data structure. |
3029 | * |
3030 | * This routine performs the necessary cleanups before deleting the @vport. |
3031 | * It invokes the discovery state machine to perform necessary state |
3032 | * transitions and to release the ndlps associated with the @vport. Note, |
3033 | * the physical port is treated as @vport 0. |
3034 | **/ |
3035 | void |
3036 | lpfc_cleanup(struct lpfc_vport *vport) |
3037 | { |
3038 | struct lpfc_hba *phba = vport->phba; |
3039 | struct lpfc_nodelist *ndlp, *next_ndlp; |
3040 | int i = 0; |
3041 | |
3042 | if (phba->link_state > LPFC_LINK_DOWN) |
3043 | lpfc_port_link_failure(vport); |
3044 | |
3045 | /* Clean up VMID resources */ |
3046 | if (lpfc_is_vmid_enabled(phba)) |
3047 | lpfc_vmid_vport_cleanup(vport); |
3048 | |
3049 | list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) { |
3050 | if (vport->port_type != LPFC_PHYSICAL_PORT && |
3051 | ndlp->nlp_DID == Fabric_DID) { |
3052 | /* Just free up ndlp with Fabric_DID for vports */ |
3053 | lpfc_nlp_put(ndlp); |
3054 | continue; |
3055 | } |
3056 | |
3057 | if (ndlp->nlp_DID == Fabric_Cntl_DID && |
3058 | ndlp->nlp_state == NLP_STE_UNUSED_NODE) { |
3059 | lpfc_nlp_put(ndlp); |
3060 | continue; |
3061 | } |
3062 | |
3063 | /* Fabric Ports not in UNMAPPED state are cleaned up in the |
3064 | * DEVICE_RM event. |
3065 | */ |
3066 | if (ndlp->nlp_type & NLP_FABRIC && |
3067 | ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) |
3068 | lpfc_disc_state_machine(vport, ndlp, NULL, |
3069 | NLP_EVT_DEVICE_RECOVERY); |
3070 | |
3071 | if (!(ndlp->fc4_xpt_flags & (NVME_XPT_REGD|SCSI_XPT_REGD))) |
3072 | lpfc_disc_state_machine(vport, ndlp, NULL, |
3073 | NLP_EVT_DEVICE_RM); |
3074 | } |
3075 | |
3076 | /* This is a special case flush to return all |
3077 | * IOs before entering this loop. There are |
3078 | * two points in the code where a flush is |
3079 | * avoided if the FC_UNLOADING flag is set. |
3080 | * one is in the multipool destroy, |
3081 | * (this prevents a crash) and the other is |
3082 | * in the nvme abort handler, ( also prevents |
3083 | * a crash). Both of these exceptions are |
3084 | * cases where the slot is still accessible. |
3085 | * The flush here is only when the pci slot |
3086 | * is offline. |
3087 | */ |
3088 | if (vport->load_flag & FC_UNLOADING && |
3089 | pci_channel_offline(pdev: phba->pcidev)) |
3090 | lpfc_sli_flush_io_rings(phba: vport->phba); |
3091 | |
3092 | /* At this point, ALL ndlp's should be gone |
3093 | * because of the previous NLP_EVT_DEVICE_RM. |
3094 | * Lets wait for this to happen, if needed. |
3095 | */ |
3096 | while (!list_empty(head: &vport->fc_nodes)) { |
3097 | if (i++ > 3000) { |
3098 | lpfc_printf_vlog(vport, KERN_ERR, |
3099 | LOG_TRACE_EVENT, |
3100 | "0233 Nodelist not empty\n" ); |
3101 | list_for_each_entry_safe(ndlp, next_ndlp, |
3102 | &vport->fc_nodes, nlp_listp) { |
3103 | lpfc_printf_vlog(ndlp->vport, KERN_ERR, |
3104 | LOG_DISCOVERY, |
3105 | "0282 did:x%x ndlp:x%px " |
3106 | "refcnt:%d xflags x%x nflag x%x\n" , |
3107 | ndlp->nlp_DID, (void *)ndlp, |
3108 | kref_read(&ndlp->kref), |
3109 | ndlp->fc4_xpt_flags, |
3110 | ndlp->nlp_flag); |
3111 | } |
3112 | break; |
3113 | } |
3114 | |
3115 | /* Wait for any activity on ndlps to settle */ |
3116 | msleep(msecs: 10); |
3117 | } |
3118 | lpfc_cleanup_vports_rrqs(vport, NULL); |
3119 | } |
3120 | |
3121 | /** |
3122 | * lpfc_stop_vport_timers - Stop all the timers associated with a vport |
3123 | * @vport: pointer to a virtual N_Port data structure. |
3124 | * |
3125 | * This routine stops all the timers associated with a @vport. This function |
3126 | * is invoked before disabling or deleting a @vport. Note that the physical |
3127 | * port is treated as @vport 0. |
3128 | **/ |
3129 | void |
3130 | lpfc_stop_vport_timers(struct lpfc_vport *vport) |
3131 | { |
3132 | del_timer_sync(timer: &vport->els_tmofunc); |
3133 | del_timer_sync(timer: &vport->delayed_disc_tmo); |
3134 | lpfc_can_disctmo(vport); |
3135 | return; |
3136 | } |
3137 | |
3138 | /** |
3139 | * __lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer |
3140 | * @phba: pointer to lpfc hba data structure. |
3141 | * |
3142 | * This routine stops the SLI4 FCF rediscover wait timer if it's on. The |
3143 | * caller of this routine should already hold the host lock. |
3144 | **/ |
3145 | void |
3146 | __lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba) |
3147 | { |
3148 | /* Clear pending FCF rediscovery wait flag */ |
3149 | phba->fcf.fcf_flag &= ~FCF_REDISC_PEND; |
3150 | |
3151 | /* Now, try to stop the timer */ |
3152 | del_timer(timer: &phba->fcf.redisc_wait); |
3153 | } |
3154 | |
3155 | /** |
3156 | * lpfc_sli4_stop_fcf_redisc_wait_timer - Stop FCF rediscovery wait timer |
3157 | * @phba: pointer to lpfc hba data structure. |
3158 | * |
3159 | * This routine stops the SLI4 FCF rediscover wait timer if it's on. It |
3160 | * checks whether the FCF rediscovery wait timer is pending with the host |
3161 | * lock held before proceeding with disabling the timer and clearing the |
3162 | * wait timer pendig flag. |
3163 | **/ |
3164 | void |
3165 | lpfc_sli4_stop_fcf_redisc_wait_timer(struct lpfc_hba *phba) |
3166 | { |
3167 | spin_lock_irq(lock: &phba->hbalock); |
3168 | if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) { |
3169 | /* FCF rediscovery timer already fired or stopped */ |
3170 | spin_unlock_irq(lock: &phba->hbalock); |
3171 | return; |
3172 | } |
3173 | __lpfc_sli4_stop_fcf_redisc_wait_timer(phba); |
3174 | /* Clear failover in progress flags */ |
3175 | phba->fcf.fcf_flag &= ~(FCF_DEAD_DISC | FCF_ACVL_DISC); |
3176 | spin_unlock_irq(lock: &phba->hbalock); |
3177 | } |
3178 | |
3179 | /** |
3180 | * lpfc_cmf_stop - Stop CMF processing |
3181 | * @phba: pointer to lpfc hba data structure. |
3182 | * |
3183 | * This is called when the link goes down or if CMF mode is turned OFF. |
3184 | * It is also called when going offline or unloaded just before the |
3185 | * congestion info buffer is unregistered. |
3186 | **/ |
3187 | void |
3188 | lpfc_cmf_stop(struct lpfc_hba *phba) |
3189 | { |
3190 | int cpu; |
3191 | struct lpfc_cgn_stat *cgs; |
3192 | |
3193 | /* We only do something if CMF is enabled */ |
3194 | if (!phba->sli4_hba.pc_sli4_params.cmf) |
3195 | return; |
3196 | |
3197 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
3198 | "6221 Stop CMF / Cancel Timer\n" ); |
3199 | |
3200 | /* Cancel the CMF timer */ |
3201 | hrtimer_cancel(timer: &phba->cmf_stats_timer); |
3202 | hrtimer_cancel(timer: &phba->cmf_timer); |
3203 | |
3204 | /* Zero CMF counters */ |
3205 | atomic_set(v: &phba->cmf_busy, i: 0); |
3206 | for_each_present_cpu(cpu) { |
3207 | cgs = per_cpu_ptr(phba->cmf_stat, cpu); |
3208 | atomic64_set(v: &cgs->total_bytes, i: 0); |
3209 | atomic64_set(v: &cgs->rcv_bytes, i: 0); |
3210 | atomic_set(v: &cgs->rx_io_cnt, i: 0); |
3211 | atomic64_set(v: &cgs->rx_latency, i: 0); |
3212 | } |
3213 | atomic_set(v: &phba->cmf_bw_wait, i: 0); |
3214 | |
3215 | /* Resume any blocked IO - Queue unblock on workqueue */ |
3216 | queue_work(wq: phba->wq, work: &phba->unblock_request_work); |
3217 | } |
3218 | |
3219 | static inline uint64_t |
3220 | lpfc_get_max_line_rate(struct lpfc_hba *phba) |
3221 | { |
3222 | uint64_t rate = lpfc_sli_port_speed_get(phba); |
3223 | |
3224 | return ((((unsigned long)rate) * 1024 * 1024) / 10); |
3225 | } |
3226 | |
3227 | void |
3228 | lpfc_cmf_signal_init(struct lpfc_hba *phba) |
3229 | { |
3230 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
3231 | "6223 Signal CMF init\n" ); |
3232 | |
3233 | /* Use the new fc_linkspeed to recalculate */ |
3234 | phba->cmf_interval_rate = LPFC_CMF_INTERVAL; |
3235 | phba->cmf_max_line_rate = lpfc_get_max_line_rate(phba); |
3236 | phba->cmf_link_byte_count = div_u64(dividend: phba->cmf_max_line_rate * |
3237 | phba->cmf_interval_rate, divisor: 1000); |
3238 | phba->cmf_max_bytes_per_interval = phba->cmf_link_byte_count; |
3239 | |
3240 | /* This is a signal to firmware to sync up CMF BW with link speed */ |
3241 | lpfc_issue_cmf_sync_wqe(phba, ms: 0, total: 0); |
3242 | } |
3243 | |
3244 | /** |
3245 | * lpfc_cmf_start - Start CMF processing |
3246 | * @phba: pointer to lpfc hba data structure. |
3247 | * |
3248 | * This is called when the link comes up or if CMF mode is turned OFF |
3249 | * to Monitor or Managed. |
3250 | **/ |
3251 | void |
3252 | lpfc_cmf_start(struct lpfc_hba *phba) |
3253 | { |
3254 | struct lpfc_cgn_stat *cgs; |
3255 | int cpu; |
3256 | |
3257 | /* We only do something if CMF is enabled */ |
3258 | if (!phba->sli4_hba.pc_sli4_params.cmf || |
3259 | phba->cmf_active_mode == LPFC_CFG_OFF) |
3260 | return; |
3261 | |
3262 | /* Reinitialize congestion buffer info */ |
3263 | lpfc_init_congestion_buf(phba); |
3264 | |
3265 | atomic_set(v: &phba->cgn_fabric_warn_cnt, i: 0); |
3266 | atomic_set(v: &phba->cgn_fabric_alarm_cnt, i: 0); |
3267 | atomic_set(v: &phba->cgn_sync_alarm_cnt, i: 0); |
3268 | atomic_set(v: &phba->cgn_sync_warn_cnt, i: 0); |
3269 | |
3270 | atomic_set(v: &phba->cmf_busy, i: 0); |
3271 | for_each_present_cpu(cpu) { |
3272 | cgs = per_cpu_ptr(phba->cmf_stat, cpu); |
3273 | atomic64_set(v: &cgs->total_bytes, i: 0); |
3274 | atomic64_set(v: &cgs->rcv_bytes, i: 0); |
3275 | atomic_set(v: &cgs->rx_io_cnt, i: 0); |
3276 | atomic64_set(v: &cgs->rx_latency, i: 0); |
3277 | } |
3278 | phba->cmf_latency.tv_sec = 0; |
3279 | phba->cmf_latency.tv_nsec = 0; |
3280 | |
3281 | lpfc_cmf_signal_init(phba); |
3282 | |
3283 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
3284 | "6222 Start CMF / Timer\n" ); |
3285 | |
3286 | phba->cmf_timer_cnt = 0; |
3287 | hrtimer_start(timer: &phba->cmf_timer, |
3288 | tim: ktime_set(secs: 0, LPFC_CMF_INTERVAL * NSEC_PER_MSEC), |
3289 | mode: HRTIMER_MODE_REL); |
3290 | hrtimer_start(timer: &phba->cmf_stats_timer, |
3291 | tim: ktime_set(secs: 0, LPFC_SEC_MIN * NSEC_PER_SEC), |
3292 | mode: HRTIMER_MODE_REL); |
3293 | /* Setup for latency check in IO cmpl routines */ |
3294 | ktime_get_real_ts64(tv: &phba->cmf_latency); |
3295 | |
3296 | atomic_set(v: &phba->cmf_bw_wait, i: 0); |
3297 | atomic_set(v: &phba->cmf_stop_io, i: 0); |
3298 | } |
3299 | |
3300 | /** |
3301 | * lpfc_stop_hba_timers - Stop all the timers associated with an HBA |
3302 | * @phba: pointer to lpfc hba data structure. |
3303 | * |
3304 | * This routine stops all the timers associated with a HBA. This function is |
3305 | * invoked before either putting a HBA offline or unloading the driver. |
3306 | **/ |
3307 | void |
3308 | lpfc_stop_hba_timers(struct lpfc_hba *phba) |
3309 | { |
3310 | if (phba->pport) |
3311 | lpfc_stop_vport_timers(vport: phba->pport); |
3312 | cancel_delayed_work_sync(dwork: &phba->eq_delay_work); |
3313 | cancel_delayed_work_sync(dwork: &phba->idle_stat_delay_work); |
3314 | del_timer_sync(timer: &phba->sli.mbox_tmo); |
3315 | del_timer_sync(timer: &phba->fabric_block_timer); |
3316 | del_timer_sync(timer: &phba->eratt_poll); |
3317 | del_timer_sync(timer: &phba->hb_tmofunc); |
3318 | if (phba->sli_rev == LPFC_SLI_REV4) { |
3319 | del_timer_sync(timer: &phba->rrq_tmr); |
3320 | phba->hba_flag &= ~HBA_RRQ_ACTIVE; |
3321 | } |
3322 | phba->hba_flag &= ~(HBA_HBEAT_INP | HBA_HBEAT_TMO); |
3323 | |
3324 | switch (phba->pci_dev_grp) { |
3325 | case LPFC_PCI_DEV_LP: |
3326 | /* Stop any LightPulse device specific driver timers */ |
3327 | del_timer_sync(timer: &phba->fcp_poll_timer); |
3328 | break; |
3329 | case LPFC_PCI_DEV_OC: |
3330 | /* Stop any OneConnect device specific driver timers */ |
3331 | lpfc_sli4_stop_fcf_redisc_wait_timer(phba); |
3332 | break; |
3333 | default: |
3334 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
3335 | "0297 Invalid device group (x%x)\n" , |
3336 | phba->pci_dev_grp); |
3337 | break; |
3338 | } |
3339 | return; |
3340 | } |
3341 | |
3342 | /** |
3343 | * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked |
3344 | * @phba: pointer to lpfc hba data structure. |
3345 | * @mbx_action: flag for mailbox no wait action. |
3346 | * |
3347 | * This routine marks a HBA's management interface as blocked. Once the HBA's |
3348 | * management interface is marked as blocked, all the user space access to |
3349 | * the HBA, whether they are from sysfs interface or libdfc interface will |
3350 | * all be blocked. The HBA is set to block the management interface when the |
3351 | * driver prepares the HBA interface for online or offline. |
3352 | **/ |
3353 | static void |
3354 | lpfc_block_mgmt_io(struct lpfc_hba *phba, int mbx_action) |
3355 | { |
3356 | unsigned long iflag; |
3357 | uint8_t actcmd = MBX_HEARTBEAT; |
3358 | unsigned long timeout; |
3359 | |
3360 | spin_lock_irqsave(&phba->hbalock, iflag); |
3361 | phba->sli.sli_flag |= LPFC_BLOCK_MGMT_IO; |
3362 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflag); |
3363 | if (mbx_action == LPFC_MBX_NO_WAIT) |
3364 | return; |
3365 | timeout = msecs_to_jiffies(LPFC_MBOX_TMO * 1000) + jiffies; |
3366 | spin_lock_irqsave(&phba->hbalock, iflag); |
3367 | if (phba->sli.mbox_active) { |
3368 | actcmd = phba->sli.mbox_active->u.mb.mbxCommand; |
3369 | /* Determine how long we might wait for the active mailbox |
3370 | * command to be gracefully completed by firmware. |
3371 | */ |
3372 | timeout = msecs_to_jiffies(m: lpfc_mbox_tmo_val(phba, |
3373 | phba->sli.mbox_active) * 1000) + jiffies; |
3374 | } |
3375 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflag); |
3376 | |
3377 | /* Wait for the outstnading mailbox command to complete */ |
3378 | while (phba->sli.mbox_active) { |
3379 | /* Check active mailbox complete status every 2ms */ |
3380 | msleep(msecs: 2); |
3381 | if (time_after(jiffies, timeout)) { |
3382 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
3383 | "2813 Mgmt IO is Blocked %x " |
3384 | "- mbox cmd %x still active\n" , |
3385 | phba->sli.sli_flag, actcmd); |
3386 | break; |
3387 | } |
3388 | } |
3389 | } |
3390 | |
3391 | /** |
3392 | * lpfc_sli4_node_prep - Assign RPIs for active nodes. |
3393 | * @phba: pointer to lpfc hba data structure. |
3394 | * |
3395 | * Allocate RPIs for all active remote nodes. This is needed whenever |
3396 | * an SLI4 adapter is reset and the driver is not unloading. Its purpose |
3397 | * is to fixup the temporary rpi assignments. |
3398 | **/ |
3399 | void |
3400 | lpfc_sli4_node_prep(struct lpfc_hba *phba) |
3401 | { |
3402 | struct lpfc_nodelist *ndlp, *next_ndlp; |
3403 | struct lpfc_vport **vports; |
3404 | int i, rpi; |
3405 | |
3406 | if (phba->sli_rev != LPFC_SLI_REV4) |
3407 | return; |
3408 | |
3409 | vports = lpfc_create_vport_work_array(phba); |
3410 | if (vports == NULL) |
3411 | return; |
3412 | |
3413 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
3414 | if (vports[i]->load_flag & FC_UNLOADING) |
3415 | continue; |
3416 | |
3417 | list_for_each_entry_safe(ndlp, next_ndlp, |
3418 | &vports[i]->fc_nodes, |
3419 | nlp_listp) { |
3420 | rpi = lpfc_sli4_alloc_rpi(phba); |
3421 | if (rpi == LPFC_RPI_ALLOC_ERROR) { |
3422 | /* TODO print log? */ |
3423 | continue; |
3424 | } |
3425 | ndlp->nlp_rpi = rpi; |
3426 | lpfc_printf_vlog(ndlp->vport, KERN_INFO, |
3427 | LOG_NODE | LOG_DISCOVERY, |
3428 | "0009 Assign RPI x%x to ndlp x%px " |
3429 | "DID:x%06x flg:x%x\n" , |
3430 | ndlp->nlp_rpi, ndlp, ndlp->nlp_DID, |
3431 | ndlp->nlp_flag); |
3432 | } |
3433 | } |
3434 | lpfc_destroy_vport_work_array(phba, vports); |
3435 | } |
3436 | |
3437 | /** |
3438 | * lpfc_create_expedite_pool - create expedite pool |
3439 | * @phba: pointer to lpfc hba data structure. |
3440 | * |
3441 | * This routine moves a batch of XRIs from lpfc_io_buf_list_put of HWQ 0 |
3442 | * to expedite pool. Mark them as expedite. |
3443 | **/ |
3444 | static void lpfc_create_expedite_pool(struct lpfc_hba *phba) |
3445 | { |
3446 | struct lpfc_sli4_hdw_queue *qp; |
3447 | struct lpfc_io_buf *lpfc_ncmd; |
3448 | struct lpfc_io_buf *lpfc_ncmd_next; |
3449 | struct lpfc_epd_pool *epd_pool; |
3450 | unsigned long iflag; |
3451 | |
3452 | epd_pool = &phba->epd_pool; |
3453 | qp = &phba->sli4_hba.hdwq[0]; |
3454 | |
3455 | spin_lock_init(&epd_pool->lock); |
3456 | spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag); |
3457 | spin_lock(lock: &epd_pool->lock); |
3458 | INIT_LIST_HEAD(list: &epd_pool->list); |
3459 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
3460 | &qp->lpfc_io_buf_list_put, list) { |
3461 | list_move_tail(list: &lpfc_ncmd->list, head: &epd_pool->list); |
3462 | lpfc_ncmd->expedite = true; |
3463 | qp->put_io_bufs--; |
3464 | epd_pool->count++; |
3465 | if (epd_pool->count >= XRI_BATCH) |
3466 | break; |
3467 | } |
3468 | spin_unlock(lock: &epd_pool->lock); |
3469 | spin_unlock_irqrestore(lock: &qp->io_buf_list_put_lock, flags: iflag); |
3470 | } |
3471 | |
3472 | /** |
3473 | * lpfc_destroy_expedite_pool - destroy expedite pool |
3474 | * @phba: pointer to lpfc hba data structure. |
3475 | * |
3476 | * This routine returns XRIs from expedite pool to lpfc_io_buf_list_put |
3477 | * of HWQ 0. Clear the mark. |
3478 | **/ |
3479 | static void lpfc_destroy_expedite_pool(struct lpfc_hba *phba) |
3480 | { |
3481 | struct lpfc_sli4_hdw_queue *qp; |
3482 | struct lpfc_io_buf *lpfc_ncmd; |
3483 | struct lpfc_io_buf *lpfc_ncmd_next; |
3484 | struct lpfc_epd_pool *epd_pool; |
3485 | unsigned long iflag; |
3486 | |
3487 | epd_pool = &phba->epd_pool; |
3488 | qp = &phba->sli4_hba.hdwq[0]; |
3489 | |
3490 | spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag); |
3491 | spin_lock(lock: &epd_pool->lock); |
3492 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
3493 | &epd_pool->list, list) { |
3494 | list_move_tail(list: &lpfc_ncmd->list, |
3495 | head: &qp->lpfc_io_buf_list_put); |
3496 | lpfc_ncmd->flags = false; |
3497 | qp->put_io_bufs++; |
3498 | epd_pool->count--; |
3499 | } |
3500 | spin_unlock(lock: &epd_pool->lock); |
3501 | spin_unlock_irqrestore(lock: &qp->io_buf_list_put_lock, flags: iflag); |
3502 | } |
3503 | |
3504 | /** |
3505 | * lpfc_create_multixri_pools - create multi-XRI pools |
3506 | * @phba: pointer to lpfc hba data structure. |
3507 | * |
3508 | * This routine initialize public, private per HWQ. Then, move XRIs from |
3509 | * lpfc_io_buf_list_put to public pool. High and low watermark are also |
3510 | * Initialized. |
3511 | **/ |
3512 | void lpfc_create_multixri_pools(struct lpfc_hba *phba) |
3513 | { |
3514 | u32 i, j; |
3515 | u32 hwq_count; |
3516 | u32 count_per_hwq; |
3517 | struct lpfc_io_buf *lpfc_ncmd; |
3518 | struct lpfc_io_buf *lpfc_ncmd_next; |
3519 | unsigned long iflag; |
3520 | struct lpfc_sli4_hdw_queue *qp; |
3521 | struct lpfc_multixri_pool *multixri_pool; |
3522 | struct lpfc_pbl_pool *pbl_pool; |
3523 | struct lpfc_pvt_pool *pvt_pool; |
3524 | |
3525 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
3526 | "1234 num_hdw_queue=%d num_present_cpu=%d common_xri_cnt=%d\n" , |
3527 | phba->cfg_hdw_queue, phba->sli4_hba.num_present_cpu, |
3528 | phba->sli4_hba.io_xri_cnt); |
3529 | |
3530 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
3531 | lpfc_create_expedite_pool(phba); |
3532 | |
3533 | hwq_count = phba->cfg_hdw_queue; |
3534 | count_per_hwq = phba->sli4_hba.io_xri_cnt / hwq_count; |
3535 | |
3536 | for (i = 0; i < hwq_count; i++) { |
3537 | multixri_pool = kzalloc(size: sizeof(*multixri_pool), GFP_KERNEL); |
3538 | |
3539 | if (!multixri_pool) { |
3540 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
3541 | "1238 Failed to allocate memory for " |
3542 | "multixri_pool\n" ); |
3543 | |
3544 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
3545 | lpfc_destroy_expedite_pool(phba); |
3546 | |
3547 | j = 0; |
3548 | while (j < i) { |
3549 | qp = &phba->sli4_hba.hdwq[j]; |
3550 | kfree(objp: qp->p_multixri_pool); |
3551 | j++; |
3552 | } |
3553 | phba->cfg_xri_rebalancing = 0; |
3554 | return; |
3555 | } |
3556 | |
3557 | qp = &phba->sli4_hba.hdwq[i]; |
3558 | qp->p_multixri_pool = multixri_pool; |
3559 | |
3560 | multixri_pool->xri_limit = count_per_hwq; |
3561 | multixri_pool->rrb_next_hwqid = i; |
3562 | |
3563 | /* Deal with public free xri pool */ |
3564 | pbl_pool = &multixri_pool->pbl_pool; |
3565 | spin_lock_init(&pbl_pool->lock); |
3566 | spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag); |
3567 | spin_lock(lock: &pbl_pool->lock); |
3568 | INIT_LIST_HEAD(list: &pbl_pool->list); |
3569 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
3570 | &qp->lpfc_io_buf_list_put, list) { |
3571 | list_move_tail(list: &lpfc_ncmd->list, head: &pbl_pool->list); |
3572 | qp->put_io_bufs--; |
3573 | pbl_pool->count++; |
3574 | } |
3575 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
3576 | "1235 Moved %d buffers from PUT list over to pbl_pool[%d]\n" , |
3577 | pbl_pool->count, i); |
3578 | spin_unlock(lock: &pbl_pool->lock); |
3579 | spin_unlock_irqrestore(lock: &qp->io_buf_list_put_lock, flags: iflag); |
3580 | |
3581 | /* Deal with private free xri pool */ |
3582 | pvt_pool = &multixri_pool->pvt_pool; |
3583 | pvt_pool->high_watermark = multixri_pool->xri_limit / 2; |
3584 | pvt_pool->low_watermark = XRI_BATCH; |
3585 | spin_lock_init(&pvt_pool->lock); |
3586 | spin_lock_irqsave(&pvt_pool->lock, iflag); |
3587 | INIT_LIST_HEAD(list: &pvt_pool->list); |
3588 | pvt_pool->count = 0; |
3589 | spin_unlock_irqrestore(lock: &pvt_pool->lock, flags: iflag); |
3590 | } |
3591 | } |
3592 | |
3593 | /** |
3594 | * lpfc_destroy_multixri_pools - destroy multi-XRI pools |
3595 | * @phba: pointer to lpfc hba data structure. |
3596 | * |
3597 | * This routine returns XRIs from public/private to lpfc_io_buf_list_put. |
3598 | **/ |
3599 | static void lpfc_destroy_multixri_pools(struct lpfc_hba *phba) |
3600 | { |
3601 | u32 i; |
3602 | u32 hwq_count; |
3603 | struct lpfc_io_buf *lpfc_ncmd; |
3604 | struct lpfc_io_buf *lpfc_ncmd_next; |
3605 | unsigned long iflag; |
3606 | struct lpfc_sli4_hdw_queue *qp; |
3607 | struct lpfc_multixri_pool *multixri_pool; |
3608 | struct lpfc_pbl_pool *pbl_pool; |
3609 | struct lpfc_pvt_pool *pvt_pool; |
3610 | |
3611 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
3612 | lpfc_destroy_expedite_pool(phba); |
3613 | |
3614 | if (!(phba->pport->load_flag & FC_UNLOADING)) |
3615 | lpfc_sli_flush_io_rings(phba); |
3616 | |
3617 | hwq_count = phba->cfg_hdw_queue; |
3618 | |
3619 | for (i = 0; i < hwq_count; i++) { |
3620 | qp = &phba->sli4_hba.hdwq[i]; |
3621 | multixri_pool = qp->p_multixri_pool; |
3622 | if (!multixri_pool) |
3623 | continue; |
3624 | |
3625 | qp->p_multixri_pool = NULL; |
3626 | |
3627 | spin_lock_irqsave(&qp->io_buf_list_put_lock, iflag); |
3628 | |
3629 | /* Deal with public free xri pool */ |
3630 | pbl_pool = &multixri_pool->pbl_pool; |
3631 | spin_lock(lock: &pbl_pool->lock); |
3632 | |
3633 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
3634 | "1236 Moving %d buffers from pbl_pool[%d] TO PUT list\n" , |
3635 | pbl_pool->count, i); |
3636 | |
3637 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
3638 | &pbl_pool->list, list) { |
3639 | list_move_tail(list: &lpfc_ncmd->list, |
3640 | head: &qp->lpfc_io_buf_list_put); |
3641 | qp->put_io_bufs++; |
3642 | pbl_pool->count--; |
3643 | } |
3644 | |
3645 | INIT_LIST_HEAD(list: &pbl_pool->list); |
3646 | pbl_pool->count = 0; |
3647 | |
3648 | spin_unlock(lock: &pbl_pool->lock); |
3649 | |
3650 | /* Deal with private free xri pool */ |
3651 | pvt_pool = &multixri_pool->pvt_pool; |
3652 | spin_lock(lock: &pvt_pool->lock); |
3653 | |
3654 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
3655 | "1237 Moving %d buffers from pvt_pool[%d] TO PUT list\n" , |
3656 | pvt_pool->count, i); |
3657 | |
3658 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
3659 | &pvt_pool->list, list) { |
3660 | list_move_tail(list: &lpfc_ncmd->list, |
3661 | head: &qp->lpfc_io_buf_list_put); |
3662 | qp->put_io_bufs++; |
3663 | pvt_pool->count--; |
3664 | } |
3665 | |
3666 | INIT_LIST_HEAD(list: &pvt_pool->list); |
3667 | pvt_pool->count = 0; |
3668 | |
3669 | spin_unlock(lock: &pvt_pool->lock); |
3670 | spin_unlock_irqrestore(lock: &qp->io_buf_list_put_lock, flags: iflag); |
3671 | |
3672 | kfree(objp: multixri_pool); |
3673 | } |
3674 | } |
3675 | |
3676 | /** |
3677 | * lpfc_online - Initialize and bring a HBA online |
3678 | * @phba: pointer to lpfc hba data structure. |
3679 | * |
3680 | * This routine initializes the HBA and brings a HBA online. During this |
3681 | * process, the management interface is blocked to prevent user space access |
3682 | * to the HBA interfering with the driver initialization. |
3683 | * |
3684 | * Return codes |
3685 | * 0 - successful |
3686 | * 1 - failed |
3687 | **/ |
3688 | int |
3689 | lpfc_online(struct lpfc_hba *phba) |
3690 | { |
3691 | struct lpfc_vport *vport; |
3692 | struct lpfc_vport **vports; |
3693 | int i, error = 0; |
3694 | bool vpis_cleared = false; |
3695 | |
3696 | if (!phba) |
3697 | return 0; |
3698 | vport = phba->pport; |
3699 | |
3700 | if (!(vport->fc_flag & FC_OFFLINE_MODE)) |
3701 | return 0; |
3702 | |
3703 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
3704 | "0458 Bring Adapter online\n" ); |
3705 | |
3706 | lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); |
3707 | |
3708 | if (phba->sli_rev == LPFC_SLI_REV4) { |
3709 | if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */ |
3710 | lpfc_unblock_mgmt_io(phba); |
3711 | return 1; |
3712 | } |
3713 | spin_lock_irq(lock: &phba->hbalock); |
3714 | if (!phba->sli4_hba.max_cfg_param.vpi_used) |
3715 | vpis_cleared = true; |
3716 | spin_unlock_irq(lock: &phba->hbalock); |
3717 | |
3718 | /* Reestablish the local initiator port. |
3719 | * The offline process destroyed the previous lport. |
3720 | */ |
3721 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME && |
3722 | !phba->nvmet_support) { |
3723 | error = lpfc_nvme_create_localport(vport: phba->pport); |
3724 | if (error) |
3725 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
3726 | "6132 NVME restore reg failed " |
3727 | "on nvmei error x%x\n" , error); |
3728 | } |
3729 | } else { |
3730 | lpfc_sli_queue_init(phba); |
3731 | if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */ |
3732 | lpfc_unblock_mgmt_io(phba); |
3733 | return 1; |
3734 | } |
3735 | } |
3736 | |
3737 | vports = lpfc_create_vport_work_array(phba); |
3738 | if (vports != NULL) { |
3739 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
3740 | struct Scsi_Host *shost; |
3741 | shost = lpfc_shost_from_vport(vport: vports[i]); |
3742 | spin_lock_irq(lock: shost->host_lock); |
3743 | vports[i]->fc_flag &= ~FC_OFFLINE_MODE; |
3744 | if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) |
3745 | vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI; |
3746 | if (phba->sli_rev == LPFC_SLI_REV4) { |
3747 | vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI; |
3748 | if ((vpis_cleared) && |
3749 | (vports[i]->port_type != |
3750 | LPFC_PHYSICAL_PORT)) |
3751 | vports[i]->vpi = 0; |
3752 | } |
3753 | spin_unlock_irq(lock: shost->host_lock); |
3754 | } |
3755 | } |
3756 | lpfc_destroy_vport_work_array(phba, vports); |
3757 | |
3758 | if (phba->cfg_xri_rebalancing) |
3759 | lpfc_create_multixri_pools(phba); |
3760 | |
3761 | lpfc_cpuhp_add(phba); |
3762 | |
3763 | lpfc_unblock_mgmt_io(phba); |
3764 | return 0; |
3765 | } |
3766 | |
3767 | /** |
3768 | * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked |
3769 | * @phba: pointer to lpfc hba data structure. |
3770 | * |
3771 | * This routine marks a HBA's management interface as not blocked. Once the |
3772 | * HBA's management interface is marked as not blocked, all the user space |
3773 | * access to the HBA, whether they are from sysfs interface or libdfc |
3774 | * interface will be allowed. The HBA is set to block the management interface |
3775 | * when the driver prepares the HBA interface for online or offline and then |
3776 | * set to unblock the management interface afterwards. |
3777 | **/ |
3778 | void |
3779 | lpfc_unblock_mgmt_io(struct lpfc_hba * phba) |
3780 | { |
3781 | unsigned long iflag; |
3782 | |
3783 | spin_lock_irqsave(&phba->hbalock, iflag); |
3784 | phba->sli.sli_flag &= ~LPFC_BLOCK_MGMT_IO; |
3785 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflag); |
3786 | } |
3787 | |
3788 | /** |
3789 | * lpfc_offline_prep - Prepare a HBA to be brought offline |
3790 | * @phba: pointer to lpfc hba data structure. |
3791 | * @mbx_action: flag for mailbox shutdown action. |
3792 | * |
3793 | * This routine is invoked to prepare a HBA to be brought offline. It performs |
3794 | * unregistration login to all the nodes on all vports and flushes the mailbox |
3795 | * queue to make it ready to be brought offline. |
3796 | **/ |
3797 | void |
3798 | lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action) |
3799 | { |
3800 | struct lpfc_vport *vport = phba->pport; |
3801 | struct lpfc_nodelist *ndlp, *next_ndlp; |
3802 | struct lpfc_vport **vports; |
3803 | struct Scsi_Host *shost; |
3804 | int i; |
3805 | int offline; |
3806 | bool hba_pci_err; |
3807 | |
3808 | if (vport->fc_flag & FC_OFFLINE_MODE) |
3809 | return; |
3810 | |
3811 | lpfc_block_mgmt_io(phba, mbx_action); |
3812 | |
3813 | lpfc_linkdown(phba); |
3814 | |
3815 | offline = pci_channel_offline(pdev: phba->pcidev); |
3816 | hba_pci_err = test_bit(HBA_PCI_ERR, &phba->bit_flags); |
3817 | |
3818 | /* Issue an unreg_login to all nodes on all vports */ |
3819 | vports = lpfc_create_vport_work_array(phba); |
3820 | if (vports != NULL) { |
3821 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
3822 | if (vports[i]->load_flag & FC_UNLOADING) |
3823 | continue; |
3824 | shost = lpfc_shost_from_vport(vport: vports[i]); |
3825 | spin_lock_irq(lock: shost->host_lock); |
3826 | vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED; |
3827 | vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI; |
3828 | vports[i]->fc_flag &= ~FC_VFI_REGISTERED; |
3829 | spin_unlock_irq(lock: shost->host_lock); |
3830 | |
3831 | shost = lpfc_shost_from_vport(vport: vports[i]); |
3832 | list_for_each_entry_safe(ndlp, next_ndlp, |
3833 | &vports[i]->fc_nodes, |
3834 | nlp_listp) { |
3835 | |
3836 | spin_lock_irq(lock: &ndlp->lock); |
3837 | ndlp->nlp_flag &= ~NLP_NPR_ADISC; |
3838 | spin_unlock_irq(lock: &ndlp->lock); |
3839 | |
3840 | if (offline || hba_pci_err) { |
3841 | spin_lock_irq(lock: &ndlp->lock); |
3842 | ndlp->nlp_flag &= ~(NLP_UNREG_INP | |
3843 | NLP_RPI_REGISTERED); |
3844 | spin_unlock_irq(lock: &ndlp->lock); |
3845 | if (phba->sli_rev == LPFC_SLI_REV4) |
3846 | lpfc_sli_rpi_release(vport: vports[i], |
3847 | ndlp); |
3848 | } else { |
3849 | lpfc_unreg_rpi(vports[i], ndlp); |
3850 | } |
3851 | /* |
3852 | * Whenever an SLI4 port goes offline, free the |
3853 | * RPI. Get a new RPI when the adapter port |
3854 | * comes back online. |
3855 | */ |
3856 | if (phba->sli_rev == LPFC_SLI_REV4) { |
3857 | lpfc_printf_vlog(vports[i], KERN_INFO, |
3858 | LOG_NODE | LOG_DISCOVERY, |
3859 | "0011 Free RPI x%x on " |
3860 | "ndlp: x%px did x%x\n" , |
3861 | ndlp->nlp_rpi, ndlp, |
3862 | ndlp->nlp_DID); |
3863 | lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); |
3864 | ndlp->nlp_rpi = LPFC_RPI_ALLOC_ERROR; |
3865 | } |
3866 | |
3867 | if (ndlp->nlp_type & NLP_FABRIC) { |
3868 | lpfc_disc_state_machine(vports[i], ndlp, |
3869 | NULL, NLP_EVT_DEVICE_RECOVERY); |
3870 | |
3871 | /* Don't remove the node unless the node |
3872 | * has been unregistered with the |
3873 | * transport, and we're not in recovery |
3874 | * before dev_loss_tmo triggered. |
3875 | * Otherwise, let dev_loss take care of |
3876 | * the node. |
3877 | */ |
3878 | if (!(ndlp->save_flags & |
3879 | NLP_IN_RECOV_POST_DEV_LOSS) && |
3880 | !(ndlp->fc4_xpt_flags & |
3881 | (NVME_XPT_REGD | SCSI_XPT_REGD))) |
3882 | lpfc_disc_state_machine |
3883 | (vports[i], ndlp, |
3884 | NULL, |
3885 | NLP_EVT_DEVICE_RM); |
3886 | } |
3887 | } |
3888 | } |
3889 | } |
3890 | lpfc_destroy_vport_work_array(phba, vports); |
3891 | |
3892 | lpfc_sli_mbox_sys_shutdown(phba, mbx_action); |
3893 | |
3894 | if (phba->wq) |
3895 | flush_workqueue(phba->wq); |
3896 | } |
3897 | |
3898 | /** |
3899 | * lpfc_offline - Bring a HBA offline |
3900 | * @phba: pointer to lpfc hba data structure. |
3901 | * |
3902 | * This routine actually brings a HBA offline. It stops all the timers |
3903 | * associated with the HBA, brings down the SLI layer, and eventually |
3904 | * marks the HBA as in offline state for the upper layer protocol. |
3905 | **/ |
3906 | void |
3907 | lpfc_offline(struct lpfc_hba *phba) |
3908 | { |
3909 | struct Scsi_Host *shost; |
3910 | struct lpfc_vport **vports; |
3911 | int i; |
3912 | |
3913 | if (phba->pport->fc_flag & FC_OFFLINE_MODE) |
3914 | return; |
3915 | |
3916 | /* stop port and all timers associated with this hba */ |
3917 | lpfc_stop_port(phba); |
3918 | |
3919 | /* Tear down the local and target port registrations. The |
3920 | * nvme transports need to cleanup. |
3921 | */ |
3922 | lpfc_nvmet_destroy_targetport(phba); |
3923 | lpfc_nvme_destroy_localport(vport: phba->pport); |
3924 | |
3925 | vports = lpfc_create_vport_work_array(phba); |
3926 | if (vports != NULL) |
3927 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) |
3928 | lpfc_stop_vport_timers(vport: vports[i]); |
3929 | lpfc_destroy_vport_work_array(phba, vports); |
3930 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
3931 | "0460 Bring Adapter offline\n" ); |
3932 | /* Bring down the SLI Layer and cleanup. The HBA is offline |
3933 | now. */ |
3934 | lpfc_sli_hba_down(phba); |
3935 | spin_lock_irq(lock: &phba->hbalock); |
3936 | phba->work_ha = 0; |
3937 | spin_unlock_irq(lock: &phba->hbalock); |
3938 | vports = lpfc_create_vport_work_array(phba); |
3939 | if (vports != NULL) |
3940 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
3941 | shost = lpfc_shost_from_vport(vport: vports[i]); |
3942 | spin_lock_irq(lock: shost->host_lock); |
3943 | vports[i]->work_port_events = 0; |
3944 | vports[i]->fc_flag |= FC_OFFLINE_MODE; |
3945 | spin_unlock_irq(lock: shost->host_lock); |
3946 | } |
3947 | lpfc_destroy_vport_work_array(phba, vports); |
3948 | /* If OFFLINE flag is clear (i.e. unloading), cpuhp removal is handled |
3949 | * in hba_unset |
3950 | */ |
3951 | if (phba->pport->fc_flag & FC_OFFLINE_MODE) |
3952 | __lpfc_cpuhp_remove(phba); |
3953 | |
3954 | if (phba->cfg_xri_rebalancing) |
3955 | lpfc_destroy_multixri_pools(phba); |
3956 | } |
3957 | |
3958 | /** |
3959 | * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists |
3960 | * @phba: pointer to lpfc hba data structure. |
3961 | * |
3962 | * This routine is to free all the SCSI buffers and IOCBs from the driver |
3963 | * list back to kernel. It is called from lpfc_pci_remove_one to free |
3964 | * the internal resources before the device is removed from the system. |
3965 | **/ |
3966 | static void |
3967 | lpfc_scsi_free(struct lpfc_hba *phba) |
3968 | { |
3969 | struct lpfc_io_buf *sb, *sb_next; |
3970 | |
3971 | if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) |
3972 | return; |
3973 | |
3974 | spin_lock_irq(lock: &phba->hbalock); |
3975 | |
3976 | /* Release all the lpfc_scsi_bufs maintained by this host. */ |
3977 | |
3978 | spin_lock(lock: &phba->scsi_buf_list_put_lock); |
3979 | list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_put, |
3980 | list) { |
3981 | list_del(entry: &sb->list); |
3982 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, vaddr: sb->data, |
3983 | addr: sb->dma_handle); |
3984 | kfree(objp: sb); |
3985 | phba->total_scsi_bufs--; |
3986 | } |
3987 | spin_unlock(lock: &phba->scsi_buf_list_put_lock); |
3988 | |
3989 | spin_lock(lock: &phba->scsi_buf_list_get_lock); |
3990 | list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list_get, |
3991 | list) { |
3992 | list_del(entry: &sb->list); |
3993 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, vaddr: sb->data, |
3994 | addr: sb->dma_handle); |
3995 | kfree(objp: sb); |
3996 | phba->total_scsi_bufs--; |
3997 | } |
3998 | spin_unlock(lock: &phba->scsi_buf_list_get_lock); |
3999 | spin_unlock_irq(lock: &phba->hbalock); |
4000 | } |
4001 | |
4002 | /** |
4003 | * lpfc_io_free - Free all the IO buffers and IOCBs from driver lists |
4004 | * @phba: pointer to lpfc hba data structure. |
4005 | * |
4006 | * This routine is to free all the IO buffers and IOCBs from the driver |
4007 | * list back to kernel. It is called from lpfc_pci_remove_one to free |
4008 | * the internal resources before the device is removed from the system. |
4009 | **/ |
4010 | void |
4011 | lpfc_io_free(struct lpfc_hba *phba) |
4012 | { |
4013 | struct lpfc_io_buf *lpfc_ncmd, *lpfc_ncmd_next; |
4014 | struct lpfc_sli4_hdw_queue *qp; |
4015 | int idx; |
4016 | |
4017 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
4018 | qp = &phba->sli4_hba.hdwq[idx]; |
4019 | /* Release all the lpfc_nvme_bufs maintained by this host. */ |
4020 | spin_lock(lock: &qp->io_buf_list_put_lock); |
4021 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
4022 | &qp->lpfc_io_buf_list_put, |
4023 | list) { |
4024 | list_del(entry: &lpfc_ncmd->list); |
4025 | qp->put_io_bufs--; |
4026 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4027 | vaddr: lpfc_ncmd->data, addr: lpfc_ncmd->dma_handle); |
4028 | if (phba->cfg_xpsgl && !phba->nvmet_support) |
4029 | lpfc_put_sgl_per_hdwq(phba, buf: lpfc_ncmd); |
4030 | lpfc_put_cmd_rsp_buf_per_hdwq(phba, buf: lpfc_ncmd); |
4031 | kfree(objp: lpfc_ncmd); |
4032 | qp->total_io_bufs--; |
4033 | } |
4034 | spin_unlock(lock: &qp->io_buf_list_put_lock); |
4035 | |
4036 | spin_lock(lock: &qp->io_buf_list_get_lock); |
4037 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
4038 | &qp->lpfc_io_buf_list_get, |
4039 | list) { |
4040 | list_del(entry: &lpfc_ncmd->list); |
4041 | qp->get_io_bufs--; |
4042 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4043 | vaddr: lpfc_ncmd->data, addr: lpfc_ncmd->dma_handle); |
4044 | if (phba->cfg_xpsgl && !phba->nvmet_support) |
4045 | lpfc_put_sgl_per_hdwq(phba, buf: lpfc_ncmd); |
4046 | lpfc_put_cmd_rsp_buf_per_hdwq(phba, buf: lpfc_ncmd); |
4047 | kfree(objp: lpfc_ncmd); |
4048 | qp->total_io_bufs--; |
4049 | } |
4050 | spin_unlock(lock: &qp->io_buf_list_get_lock); |
4051 | } |
4052 | } |
4053 | |
4054 | /** |
4055 | * lpfc_sli4_els_sgl_update - update ELS xri-sgl sizing and mapping |
4056 | * @phba: pointer to lpfc hba data structure. |
4057 | * |
4058 | * This routine first calculates the sizes of the current els and allocated |
4059 | * scsi sgl lists, and then goes through all sgls to updates the physical |
4060 | * XRIs assigned due to port function reset. During port initialization, the |
4061 | * current els and allocated scsi sgl lists are 0s. |
4062 | * |
4063 | * Return codes |
4064 | * 0 - successful (for now, it always returns 0) |
4065 | **/ |
4066 | int |
4067 | lpfc_sli4_els_sgl_update(struct lpfc_hba *phba) |
4068 | { |
4069 | struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL; |
4070 | uint16_t i, lxri, xri_cnt, els_xri_cnt; |
4071 | LIST_HEAD(els_sgl_list); |
4072 | int rc; |
4073 | |
4074 | /* |
4075 | * update on pci function's els xri-sgl list |
4076 | */ |
4077 | els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); |
4078 | |
4079 | if (els_xri_cnt > phba->sli4_hba.els_xri_cnt) { |
4080 | /* els xri-sgl expanded */ |
4081 | xri_cnt = els_xri_cnt - phba->sli4_hba.els_xri_cnt; |
4082 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4083 | "3157 ELS xri-sgl count increased from " |
4084 | "%d to %d\n" , phba->sli4_hba.els_xri_cnt, |
4085 | els_xri_cnt); |
4086 | /* allocate the additional els sgls */ |
4087 | for (i = 0; i < xri_cnt; i++) { |
4088 | sglq_entry = kzalloc(size: sizeof(struct lpfc_sglq), |
4089 | GFP_KERNEL); |
4090 | if (sglq_entry == NULL) { |
4091 | lpfc_printf_log(phba, KERN_ERR, |
4092 | LOG_TRACE_EVENT, |
4093 | "2562 Failure to allocate an " |
4094 | "ELS sgl entry:%d\n" , i); |
4095 | rc = -ENOMEM; |
4096 | goto out_free_mem; |
4097 | } |
4098 | sglq_entry->buff_type = GEN_BUFF_TYPE; |
4099 | sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, |
4100 | &sglq_entry->phys); |
4101 | if (sglq_entry->virt == NULL) { |
4102 | kfree(objp: sglq_entry); |
4103 | lpfc_printf_log(phba, KERN_ERR, |
4104 | LOG_TRACE_EVENT, |
4105 | "2563 Failure to allocate an " |
4106 | "ELS mbuf:%d\n" , i); |
4107 | rc = -ENOMEM; |
4108 | goto out_free_mem; |
4109 | } |
4110 | sglq_entry->sgl = sglq_entry->virt; |
4111 | memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE); |
4112 | sglq_entry->state = SGL_FREED; |
4113 | list_add_tail(new: &sglq_entry->list, head: &els_sgl_list); |
4114 | } |
4115 | spin_lock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
4116 | list_splice_init(list: &els_sgl_list, |
4117 | head: &phba->sli4_hba.lpfc_els_sgl_list); |
4118 | spin_unlock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
4119 | } else if (els_xri_cnt < phba->sli4_hba.els_xri_cnt) { |
4120 | /* els xri-sgl shrinked */ |
4121 | xri_cnt = phba->sli4_hba.els_xri_cnt - els_xri_cnt; |
4122 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4123 | "3158 ELS xri-sgl count decreased from " |
4124 | "%d to %d\n" , phba->sli4_hba.els_xri_cnt, |
4125 | els_xri_cnt); |
4126 | spin_lock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
4127 | list_splice_init(list: &phba->sli4_hba.lpfc_els_sgl_list, |
4128 | head: &els_sgl_list); |
4129 | /* release extra els sgls from list */ |
4130 | for (i = 0; i < xri_cnt; i++) { |
4131 | list_remove_head(&els_sgl_list, |
4132 | sglq_entry, struct lpfc_sglq, list); |
4133 | if (sglq_entry) { |
4134 | __lpfc_mbuf_free(phba, sglq_entry->virt, |
4135 | sglq_entry->phys); |
4136 | kfree(objp: sglq_entry); |
4137 | } |
4138 | } |
4139 | list_splice_init(list: &els_sgl_list, |
4140 | head: &phba->sli4_hba.lpfc_els_sgl_list); |
4141 | spin_unlock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
4142 | } else |
4143 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4144 | "3163 ELS xri-sgl count unchanged: %d\n" , |
4145 | els_xri_cnt); |
4146 | phba->sli4_hba.els_xri_cnt = els_xri_cnt; |
4147 | |
4148 | /* update xris to els sgls on the list */ |
4149 | sglq_entry = NULL; |
4150 | sglq_entry_next = NULL; |
4151 | list_for_each_entry_safe(sglq_entry, sglq_entry_next, |
4152 | &phba->sli4_hba.lpfc_els_sgl_list, list) { |
4153 | lxri = lpfc_sli4_next_xritag(phba); |
4154 | if (lxri == NO_XRI) { |
4155 | lpfc_printf_log(phba, KERN_ERR, |
4156 | LOG_TRACE_EVENT, |
4157 | "2400 Failed to allocate xri for " |
4158 | "ELS sgl\n" ); |
4159 | rc = -ENOMEM; |
4160 | goto out_free_mem; |
4161 | } |
4162 | sglq_entry->sli4_lxritag = lxri; |
4163 | sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; |
4164 | } |
4165 | return 0; |
4166 | |
4167 | out_free_mem: |
4168 | lpfc_free_els_sgl_list(phba); |
4169 | return rc; |
4170 | } |
4171 | |
4172 | /** |
4173 | * lpfc_sli4_nvmet_sgl_update - update xri-sgl sizing and mapping |
4174 | * @phba: pointer to lpfc hba data structure. |
4175 | * |
4176 | * This routine first calculates the sizes of the current els and allocated |
4177 | * scsi sgl lists, and then goes through all sgls to updates the physical |
4178 | * XRIs assigned due to port function reset. During port initialization, the |
4179 | * current els and allocated scsi sgl lists are 0s. |
4180 | * |
4181 | * Return codes |
4182 | * 0 - successful (for now, it always returns 0) |
4183 | **/ |
4184 | int |
4185 | lpfc_sli4_nvmet_sgl_update(struct lpfc_hba *phba) |
4186 | { |
4187 | struct lpfc_sglq *sglq_entry = NULL, *sglq_entry_next = NULL; |
4188 | uint16_t i, lxri, xri_cnt, els_xri_cnt; |
4189 | uint16_t nvmet_xri_cnt; |
4190 | LIST_HEAD(nvmet_sgl_list); |
4191 | int rc; |
4192 | |
4193 | /* |
4194 | * update on pci function's nvmet xri-sgl list |
4195 | */ |
4196 | els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); |
4197 | |
4198 | /* For NVMET, ALL remaining XRIs are dedicated for IO processing */ |
4199 | nvmet_xri_cnt = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt; |
4200 | if (nvmet_xri_cnt > phba->sli4_hba.nvmet_xri_cnt) { |
4201 | /* els xri-sgl expanded */ |
4202 | xri_cnt = nvmet_xri_cnt - phba->sli4_hba.nvmet_xri_cnt; |
4203 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4204 | "6302 NVMET xri-sgl cnt grew from %d to %d\n" , |
4205 | phba->sli4_hba.nvmet_xri_cnt, nvmet_xri_cnt); |
4206 | /* allocate the additional nvmet sgls */ |
4207 | for (i = 0; i < xri_cnt; i++) { |
4208 | sglq_entry = kzalloc(size: sizeof(struct lpfc_sglq), |
4209 | GFP_KERNEL); |
4210 | if (sglq_entry == NULL) { |
4211 | lpfc_printf_log(phba, KERN_ERR, |
4212 | LOG_TRACE_EVENT, |
4213 | "6303 Failure to allocate an " |
4214 | "NVMET sgl entry:%d\n" , i); |
4215 | rc = -ENOMEM; |
4216 | goto out_free_mem; |
4217 | } |
4218 | sglq_entry->buff_type = NVMET_BUFF_TYPE; |
4219 | sglq_entry->virt = lpfc_nvmet_buf_alloc(phba, flags: 0, |
4220 | handle: &sglq_entry->phys); |
4221 | if (sglq_entry->virt == NULL) { |
4222 | kfree(objp: sglq_entry); |
4223 | lpfc_printf_log(phba, KERN_ERR, |
4224 | LOG_TRACE_EVENT, |
4225 | "6304 Failure to allocate an " |
4226 | "NVMET buf:%d\n" , i); |
4227 | rc = -ENOMEM; |
4228 | goto out_free_mem; |
4229 | } |
4230 | sglq_entry->sgl = sglq_entry->virt; |
4231 | memset(sglq_entry->sgl, 0, |
4232 | phba->cfg_sg_dma_buf_size); |
4233 | sglq_entry->state = SGL_FREED; |
4234 | list_add_tail(new: &sglq_entry->list, head: &nvmet_sgl_list); |
4235 | } |
4236 | spin_lock_irq(lock: &phba->hbalock); |
4237 | spin_lock(lock: &phba->sli4_hba.sgl_list_lock); |
4238 | list_splice_init(list: &nvmet_sgl_list, |
4239 | head: &phba->sli4_hba.lpfc_nvmet_sgl_list); |
4240 | spin_unlock(lock: &phba->sli4_hba.sgl_list_lock); |
4241 | spin_unlock_irq(lock: &phba->hbalock); |
4242 | } else if (nvmet_xri_cnt < phba->sli4_hba.nvmet_xri_cnt) { |
4243 | /* nvmet xri-sgl shrunk */ |
4244 | xri_cnt = phba->sli4_hba.nvmet_xri_cnt - nvmet_xri_cnt; |
4245 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4246 | "6305 NVMET xri-sgl count decreased from " |
4247 | "%d to %d\n" , phba->sli4_hba.nvmet_xri_cnt, |
4248 | nvmet_xri_cnt); |
4249 | spin_lock_irq(lock: &phba->hbalock); |
4250 | spin_lock(lock: &phba->sli4_hba.sgl_list_lock); |
4251 | list_splice_init(list: &phba->sli4_hba.lpfc_nvmet_sgl_list, |
4252 | head: &nvmet_sgl_list); |
4253 | /* release extra nvmet sgls from list */ |
4254 | for (i = 0; i < xri_cnt; i++) { |
4255 | list_remove_head(&nvmet_sgl_list, |
4256 | sglq_entry, struct lpfc_sglq, list); |
4257 | if (sglq_entry) { |
4258 | lpfc_nvmet_buf_free(phba, virtp: sglq_entry->virt, |
4259 | dma: sglq_entry->phys); |
4260 | kfree(objp: sglq_entry); |
4261 | } |
4262 | } |
4263 | list_splice_init(list: &nvmet_sgl_list, |
4264 | head: &phba->sli4_hba.lpfc_nvmet_sgl_list); |
4265 | spin_unlock(lock: &phba->sli4_hba.sgl_list_lock); |
4266 | spin_unlock_irq(lock: &phba->hbalock); |
4267 | } else |
4268 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4269 | "6306 NVMET xri-sgl count unchanged: %d\n" , |
4270 | nvmet_xri_cnt); |
4271 | phba->sli4_hba.nvmet_xri_cnt = nvmet_xri_cnt; |
4272 | |
4273 | /* update xris to nvmet sgls on the list */ |
4274 | sglq_entry = NULL; |
4275 | sglq_entry_next = NULL; |
4276 | list_for_each_entry_safe(sglq_entry, sglq_entry_next, |
4277 | &phba->sli4_hba.lpfc_nvmet_sgl_list, list) { |
4278 | lxri = lpfc_sli4_next_xritag(phba); |
4279 | if (lxri == NO_XRI) { |
4280 | lpfc_printf_log(phba, KERN_ERR, |
4281 | LOG_TRACE_EVENT, |
4282 | "6307 Failed to allocate xri for " |
4283 | "NVMET sgl\n" ); |
4284 | rc = -ENOMEM; |
4285 | goto out_free_mem; |
4286 | } |
4287 | sglq_entry->sli4_lxritag = lxri; |
4288 | sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; |
4289 | } |
4290 | return 0; |
4291 | |
4292 | out_free_mem: |
4293 | lpfc_free_nvmet_sgl_list(phba); |
4294 | return rc; |
4295 | } |
4296 | |
4297 | int |
4298 | lpfc_io_buf_flush(struct lpfc_hba *phba, struct list_head *cbuf) |
4299 | { |
4300 | LIST_HEAD(blist); |
4301 | struct lpfc_sli4_hdw_queue *qp; |
4302 | struct lpfc_io_buf *lpfc_cmd; |
4303 | struct lpfc_io_buf *iobufp, *prev_iobufp; |
4304 | int idx, cnt, xri, inserted; |
4305 | |
4306 | cnt = 0; |
4307 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
4308 | qp = &phba->sli4_hba.hdwq[idx]; |
4309 | spin_lock_irq(lock: &qp->io_buf_list_get_lock); |
4310 | spin_lock(lock: &qp->io_buf_list_put_lock); |
4311 | |
4312 | /* Take everything off the get and put lists */ |
4313 | list_splice_init(list: &qp->lpfc_io_buf_list_get, head: &blist); |
4314 | list_splice(list: &qp->lpfc_io_buf_list_put, head: &blist); |
4315 | INIT_LIST_HEAD(list: &qp->lpfc_io_buf_list_get); |
4316 | INIT_LIST_HEAD(list: &qp->lpfc_io_buf_list_put); |
4317 | cnt += qp->get_io_bufs + qp->put_io_bufs; |
4318 | qp->get_io_bufs = 0; |
4319 | qp->put_io_bufs = 0; |
4320 | qp->total_io_bufs = 0; |
4321 | spin_unlock(lock: &qp->io_buf_list_put_lock); |
4322 | spin_unlock_irq(lock: &qp->io_buf_list_get_lock); |
4323 | } |
4324 | |
4325 | /* |
4326 | * Take IO buffers off blist and put on cbuf sorted by XRI. |
4327 | * This is because POST_SGL takes a sequential range of XRIs |
4328 | * to post to the firmware. |
4329 | */ |
4330 | for (idx = 0; idx < cnt; idx++) { |
4331 | list_remove_head(&blist, lpfc_cmd, struct lpfc_io_buf, list); |
4332 | if (!lpfc_cmd) |
4333 | return cnt; |
4334 | if (idx == 0) { |
4335 | list_add_tail(new: &lpfc_cmd->list, head: cbuf); |
4336 | continue; |
4337 | } |
4338 | xri = lpfc_cmd->cur_iocbq.sli4_xritag; |
4339 | inserted = 0; |
4340 | prev_iobufp = NULL; |
4341 | list_for_each_entry(iobufp, cbuf, list) { |
4342 | if (xri < iobufp->cur_iocbq.sli4_xritag) { |
4343 | if (prev_iobufp) |
4344 | list_add(new: &lpfc_cmd->list, |
4345 | head: &prev_iobufp->list); |
4346 | else |
4347 | list_add(new: &lpfc_cmd->list, head: cbuf); |
4348 | inserted = 1; |
4349 | break; |
4350 | } |
4351 | prev_iobufp = iobufp; |
4352 | } |
4353 | if (!inserted) |
4354 | list_add_tail(new: &lpfc_cmd->list, head: cbuf); |
4355 | } |
4356 | return cnt; |
4357 | } |
4358 | |
4359 | int |
4360 | lpfc_io_buf_replenish(struct lpfc_hba *phba, struct list_head *cbuf) |
4361 | { |
4362 | struct lpfc_sli4_hdw_queue *qp; |
4363 | struct lpfc_io_buf *lpfc_cmd; |
4364 | int idx, cnt; |
4365 | unsigned long iflags; |
4366 | |
4367 | qp = phba->sli4_hba.hdwq; |
4368 | cnt = 0; |
4369 | while (!list_empty(head: cbuf)) { |
4370 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
4371 | list_remove_head(cbuf, lpfc_cmd, |
4372 | struct lpfc_io_buf, list); |
4373 | if (!lpfc_cmd) |
4374 | return cnt; |
4375 | cnt++; |
4376 | qp = &phba->sli4_hba.hdwq[idx]; |
4377 | lpfc_cmd->hdwq_no = idx; |
4378 | lpfc_cmd->hdwq = qp; |
4379 | lpfc_cmd->cur_iocbq.cmd_cmpl = NULL; |
4380 | spin_lock_irqsave(&qp->io_buf_list_put_lock, iflags); |
4381 | list_add_tail(new: &lpfc_cmd->list, |
4382 | head: &qp->lpfc_io_buf_list_put); |
4383 | qp->put_io_bufs++; |
4384 | qp->total_io_bufs++; |
4385 | spin_unlock_irqrestore(lock: &qp->io_buf_list_put_lock, |
4386 | flags: iflags); |
4387 | } |
4388 | } |
4389 | return cnt; |
4390 | } |
4391 | |
4392 | /** |
4393 | * lpfc_sli4_io_sgl_update - update xri-sgl sizing and mapping |
4394 | * @phba: pointer to lpfc hba data structure. |
4395 | * |
4396 | * This routine first calculates the sizes of the current els and allocated |
4397 | * scsi sgl lists, and then goes through all sgls to updates the physical |
4398 | * XRIs assigned due to port function reset. During port initialization, the |
4399 | * current els and allocated scsi sgl lists are 0s. |
4400 | * |
4401 | * Return codes |
4402 | * 0 - successful (for now, it always returns 0) |
4403 | **/ |
4404 | int |
4405 | lpfc_sli4_io_sgl_update(struct lpfc_hba *phba) |
4406 | { |
4407 | struct lpfc_io_buf *lpfc_ncmd = NULL, *lpfc_ncmd_next = NULL; |
4408 | uint16_t i, lxri, els_xri_cnt; |
4409 | uint16_t io_xri_cnt, io_xri_max; |
4410 | LIST_HEAD(io_sgl_list); |
4411 | int rc, cnt; |
4412 | |
4413 | /* |
4414 | * update on pci function's allocated nvme xri-sgl list |
4415 | */ |
4416 | |
4417 | /* maximum number of xris available for nvme buffers */ |
4418 | els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); |
4419 | io_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt; |
4420 | phba->sli4_hba.io_xri_max = io_xri_max; |
4421 | |
4422 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
4423 | "6074 Current allocated XRI sgl count:%d, " |
4424 | "maximum XRI count:%d els_xri_cnt:%d\n\n" , |
4425 | phba->sli4_hba.io_xri_cnt, |
4426 | phba->sli4_hba.io_xri_max, |
4427 | els_xri_cnt); |
4428 | |
4429 | cnt = lpfc_io_buf_flush(phba, cbuf: &io_sgl_list); |
4430 | |
4431 | if (phba->sli4_hba.io_xri_cnt > phba->sli4_hba.io_xri_max) { |
4432 | /* max nvme xri shrunk below the allocated nvme buffers */ |
4433 | io_xri_cnt = phba->sli4_hba.io_xri_cnt - |
4434 | phba->sli4_hba.io_xri_max; |
4435 | /* release the extra allocated nvme buffers */ |
4436 | for (i = 0; i < io_xri_cnt; i++) { |
4437 | list_remove_head(&io_sgl_list, lpfc_ncmd, |
4438 | struct lpfc_io_buf, list); |
4439 | if (lpfc_ncmd) { |
4440 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4441 | vaddr: lpfc_ncmd->data, |
4442 | addr: lpfc_ncmd->dma_handle); |
4443 | kfree(objp: lpfc_ncmd); |
4444 | } |
4445 | } |
4446 | phba->sli4_hba.io_xri_cnt -= io_xri_cnt; |
4447 | } |
4448 | |
4449 | /* update xris associated to remaining allocated nvme buffers */ |
4450 | lpfc_ncmd = NULL; |
4451 | lpfc_ncmd_next = NULL; |
4452 | phba->sli4_hba.io_xri_cnt = cnt; |
4453 | list_for_each_entry_safe(lpfc_ncmd, lpfc_ncmd_next, |
4454 | &io_sgl_list, list) { |
4455 | lxri = lpfc_sli4_next_xritag(phba); |
4456 | if (lxri == NO_XRI) { |
4457 | lpfc_printf_log(phba, KERN_ERR, |
4458 | LOG_TRACE_EVENT, |
4459 | "6075 Failed to allocate xri for " |
4460 | "nvme buffer\n" ); |
4461 | rc = -ENOMEM; |
4462 | goto out_free_mem; |
4463 | } |
4464 | lpfc_ncmd->cur_iocbq.sli4_lxritag = lxri; |
4465 | lpfc_ncmd->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; |
4466 | } |
4467 | cnt = lpfc_io_buf_replenish(phba, cbuf: &io_sgl_list); |
4468 | return 0; |
4469 | |
4470 | out_free_mem: |
4471 | lpfc_io_free(phba); |
4472 | return rc; |
4473 | } |
4474 | |
4475 | /** |
4476 | * lpfc_new_io_buf - IO buffer allocator for HBA with SLI4 IF spec |
4477 | * @phba: Pointer to lpfc hba data structure. |
4478 | * @num_to_alloc: The requested number of buffers to allocate. |
4479 | * |
4480 | * This routine allocates nvme buffers for device with SLI-4 interface spec, |
4481 | * the nvme buffer contains all the necessary information needed to initiate |
4482 | * an I/O. After allocating up to @num_to_allocate IO buffers and put |
4483 | * them on a list, it post them to the port by using SGL block post. |
4484 | * |
4485 | * Return codes: |
4486 | * int - number of IO buffers that were allocated and posted. |
4487 | * 0 = failure, less than num_to_alloc is a partial failure. |
4488 | **/ |
4489 | int |
4490 | lpfc_new_io_buf(struct lpfc_hba *phba, int num_to_alloc) |
4491 | { |
4492 | struct lpfc_io_buf *lpfc_ncmd; |
4493 | struct lpfc_iocbq *pwqeq; |
4494 | uint16_t iotag, lxri = 0; |
4495 | int bcnt, num_posted; |
4496 | LIST_HEAD(prep_nblist); |
4497 | LIST_HEAD(post_nblist); |
4498 | LIST_HEAD(nvme_nblist); |
4499 | |
4500 | phba->sli4_hba.io_xri_cnt = 0; |
4501 | for (bcnt = 0; bcnt < num_to_alloc; bcnt++) { |
4502 | lpfc_ncmd = kzalloc(size: sizeof(*lpfc_ncmd), GFP_KERNEL); |
4503 | if (!lpfc_ncmd) |
4504 | break; |
4505 | /* |
4506 | * Get memory from the pci pool to map the virt space to |
4507 | * pci bus space for an I/O. The DMA buffer includes the |
4508 | * number of SGE's necessary to support the sg_tablesize. |
4509 | */ |
4510 | lpfc_ncmd->data = dma_pool_zalloc(pool: phba->lpfc_sg_dma_buf_pool, |
4511 | GFP_KERNEL, |
4512 | handle: &lpfc_ncmd->dma_handle); |
4513 | if (!lpfc_ncmd->data) { |
4514 | kfree(objp: lpfc_ncmd); |
4515 | break; |
4516 | } |
4517 | |
4518 | if (phba->cfg_xpsgl && !phba->nvmet_support) { |
4519 | INIT_LIST_HEAD(list: &lpfc_ncmd->dma_sgl_xtra_list); |
4520 | } else { |
4521 | /* |
4522 | * 4K Page alignment is CRITICAL to BlockGuard, double |
4523 | * check to be sure. |
4524 | */ |
4525 | if ((phba->sli3_options & LPFC_SLI3_BG_ENABLED) && |
4526 | (((unsigned long)(lpfc_ncmd->data) & |
4527 | (unsigned long)(SLI4_PAGE_SIZE - 1)) != 0)) { |
4528 | lpfc_printf_log(phba, KERN_ERR, |
4529 | LOG_TRACE_EVENT, |
4530 | "3369 Memory alignment err: " |
4531 | "addr=%lx\n" , |
4532 | (unsigned long)lpfc_ncmd->data); |
4533 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4534 | vaddr: lpfc_ncmd->data, |
4535 | addr: lpfc_ncmd->dma_handle); |
4536 | kfree(objp: lpfc_ncmd); |
4537 | break; |
4538 | } |
4539 | } |
4540 | |
4541 | INIT_LIST_HEAD(list: &lpfc_ncmd->dma_cmd_rsp_list); |
4542 | |
4543 | lxri = lpfc_sli4_next_xritag(phba); |
4544 | if (lxri == NO_XRI) { |
4545 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4546 | vaddr: lpfc_ncmd->data, addr: lpfc_ncmd->dma_handle); |
4547 | kfree(objp: lpfc_ncmd); |
4548 | break; |
4549 | } |
4550 | pwqeq = &lpfc_ncmd->cur_iocbq; |
4551 | |
4552 | /* Allocate iotag for lpfc_ncmd->cur_iocbq. */ |
4553 | iotag = lpfc_sli_next_iotag(phba, pwqeq); |
4554 | if (iotag == 0) { |
4555 | dma_pool_free(pool: phba->lpfc_sg_dma_buf_pool, |
4556 | vaddr: lpfc_ncmd->data, addr: lpfc_ncmd->dma_handle); |
4557 | kfree(objp: lpfc_ncmd); |
4558 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
4559 | "6121 Failed to allocate IOTAG for" |
4560 | " XRI:0x%x\n" , lxri); |
4561 | lpfc_sli4_free_xri(phba, lxri); |
4562 | break; |
4563 | } |
4564 | pwqeq->sli4_lxritag = lxri; |
4565 | pwqeq->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; |
4566 | |
4567 | /* Initialize local short-hand pointers. */ |
4568 | lpfc_ncmd->dma_sgl = lpfc_ncmd->data; |
4569 | lpfc_ncmd->dma_phys_sgl = lpfc_ncmd->dma_handle; |
4570 | lpfc_ncmd->cur_iocbq.io_buf = lpfc_ncmd; |
4571 | spin_lock_init(&lpfc_ncmd->buf_lock); |
4572 | |
4573 | /* add the nvme buffer to a post list */ |
4574 | list_add_tail(new: &lpfc_ncmd->list, head: &post_nblist); |
4575 | phba->sli4_hba.io_xri_cnt++; |
4576 | } |
4577 | lpfc_printf_log(phba, KERN_INFO, LOG_NVME, |
4578 | "6114 Allocate %d out of %d requested new NVME " |
4579 | "buffers of size x%zu bytes\n" , bcnt, num_to_alloc, |
4580 | sizeof(*lpfc_ncmd)); |
4581 | |
4582 | |
4583 | /* post the list of nvme buffer sgls to port if available */ |
4584 | if (!list_empty(head: &post_nblist)) |
4585 | num_posted = lpfc_sli4_post_io_sgl_list( |
4586 | phba, blist: &post_nblist, xricnt: bcnt); |
4587 | else |
4588 | num_posted = 0; |
4589 | |
4590 | return num_posted; |
4591 | } |
4592 | |
4593 | static uint64_t |
4594 | lpfc_get_wwpn(struct lpfc_hba *phba) |
4595 | { |
4596 | uint64_t wwn; |
4597 | int rc; |
4598 | LPFC_MBOXQ_t *mboxq; |
4599 | MAILBOX_t *mb; |
4600 | |
4601 | mboxq = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, |
4602 | GFP_KERNEL); |
4603 | if (!mboxq) |
4604 | return (uint64_t)-1; |
4605 | |
4606 | /* First get WWN of HBA instance */ |
4607 | lpfc_read_nv(phba, mboxq); |
4608 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
4609 | if (rc != MBX_SUCCESS) { |
4610 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
4611 | "6019 Mailbox failed , mbxCmd x%x " |
4612 | "READ_NV, mbxStatus x%x\n" , |
4613 | bf_get(lpfc_mqe_command, &mboxq->u.mqe), |
4614 | bf_get(lpfc_mqe_status, &mboxq->u.mqe)); |
4615 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
4616 | return (uint64_t) -1; |
4617 | } |
4618 | mb = &mboxq->u.mb; |
4619 | memcpy(&wwn, (char *)mb->un.varRDnvp.portname, sizeof(uint64_t)); |
4620 | /* wwn is WWPN of HBA instance */ |
4621 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
4622 | if (phba->sli_rev == LPFC_SLI_REV4) |
4623 | return be64_to_cpu(wwn); |
4624 | else |
4625 | return rol64(word: wwn, shift: 32); |
4626 | } |
4627 | |
4628 | static unsigned short lpfc_get_sg_tablesize(struct lpfc_hba *phba) |
4629 | { |
4630 | if (phba->sli_rev == LPFC_SLI_REV4) |
4631 | if (phba->cfg_xpsgl && !phba->nvmet_support) |
4632 | return LPFC_MAX_SG_TABLESIZE; |
4633 | else |
4634 | return phba->cfg_scsi_seg_cnt; |
4635 | else |
4636 | return phba->cfg_sg_seg_cnt; |
4637 | } |
4638 | |
4639 | /** |
4640 | * lpfc_vmid_res_alloc - Allocates resources for VMID |
4641 | * @phba: pointer to lpfc hba data structure. |
4642 | * @vport: pointer to vport data structure |
4643 | * |
4644 | * This routine allocated the resources needed for the VMID. |
4645 | * |
4646 | * Return codes |
4647 | * 0 on Success |
4648 | * Non-0 on Failure |
4649 | */ |
4650 | static int |
4651 | lpfc_vmid_res_alloc(struct lpfc_hba *phba, struct lpfc_vport *vport) |
4652 | { |
4653 | /* VMID feature is supported only on SLI4 */ |
4654 | if (phba->sli_rev == LPFC_SLI_REV3) { |
4655 | phba->cfg_vmid_app_header = 0; |
4656 | phba->cfg_vmid_priority_tagging = 0; |
4657 | } |
4658 | |
4659 | if (lpfc_is_vmid_enabled(phba)) { |
4660 | vport->vmid = |
4661 | kcalloc(n: phba->cfg_max_vmid, size: sizeof(struct lpfc_vmid), |
4662 | GFP_KERNEL); |
4663 | if (!vport->vmid) |
4664 | return -ENOMEM; |
4665 | |
4666 | rwlock_init(&vport->vmid_lock); |
4667 | |
4668 | /* Set the VMID parameters for the vport */ |
4669 | vport->vmid_priority_tagging = phba->cfg_vmid_priority_tagging; |
4670 | vport->vmid_inactivity_timeout = |
4671 | phba->cfg_vmid_inactivity_timeout; |
4672 | vport->max_vmid = phba->cfg_max_vmid; |
4673 | vport->cur_vmid_cnt = 0; |
4674 | |
4675 | vport->vmid_priority_range = bitmap_zalloc |
4676 | (LPFC_VMID_MAX_PRIORITY_RANGE, GFP_KERNEL); |
4677 | |
4678 | if (!vport->vmid_priority_range) { |
4679 | kfree(objp: vport->vmid); |
4680 | return -ENOMEM; |
4681 | } |
4682 | |
4683 | hash_init(vport->hash_table); |
4684 | } |
4685 | return 0; |
4686 | } |
4687 | |
4688 | /** |
4689 | * lpfc_create_port - Create an FC port |
4690 | * @phba: pointer to lpfc hba data structure. |
4691 | * @instance: a unique integer ID to this FC port. |
4692 | * @dev: pointer to the device data structure. |
4693 | * |
4694 | * This routine creates a FC port for the upper layer protocol. The FC port |
4695 | * can be created on top of either a physical port or a virtual port provided |
4696 | * by the HBA. This routine also allocates a SCSI host data structure (shost) |
4697 | * and associates the FC port created before adding the shost into the SCSI |
4698 | * layer. |
4699 | * |
4700 | * Return codes |
4701 | * @vport - pointer to the virtual N_Port data structure. |
4702 | * NULL - port create failed. |
4703 | **/ |
4704 | struct lpfc_vport * |
4705 | lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) |
4706 | { |
4707 | struct lpfc_vport *vport; |
4708 | struct Scsi_Host *shost = NULL; |
4709 | struct scsi_host_template *template; |
4710 | int error = 0; |
4711 | int i; |
4712 | uint64_t wwn; |
4713 | bool use_no_reset_hba = false; |
4714 | int rc; |
4715 | |
4716 | if (lpfc_no_hba_reset_cnt) { |
4717 | if (phba->sli_rev < LPFC_SLI_REV4 && |
4718 | dev == &phba->pcidev->dev) { |
4719 | /* Reset the port first */ |
4720 | lpfc_sli_brdrestart(phba); |
4721 | rc = lpfc_sli_chipset_init(phba); |
4722 | if (rc) |
4723 | return NULL; |
4724 | } |
4725 | wwn = lpfc_get_wwpn(phba); |
4726 | } |
4727 | |
4728 | for (i = 0; i < lpfc_no_hba_reset_cnt; i++) { |
4729 | if (wwn == lpfc_no_hba_reset[i]) { |
4730 | lpfc_printf_log(phba, KERN_ERR, |
4731 | LOG_TRACE_EVENT, |
4732 | "6020 Setting use_no_reset port=%llx\n" , |
4733 | wwn); |
4734 | use_no_reset_hba = true; |
4735 | break; |
4736 | } |
4737 | } |
4738 | |
4739 | /* Seed template for SCSI host registration */ |
4740 | if (dev == &phba->pcidev->dev) { |
4741 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) { |
4742 | /* Seed physical port template */ |
4743 | template = &lpfc_template; |
4744 | |
4745 | if (use_no_reset_hba) |
4746 | /* template is for a no reset SCSI Host */ |
4747 | template->eh_host_reset_handler = NULL; |
4748 | |
4749 | /* Seed updated value of sg_tablesize */ |
4750 | template->sg_tablesize = lpfc_get_sg_tablesize(phba); |
4751 | } else { |
4752 | /* NVMET is for physical port only */ |
4753 | template = &lpfc_template_nvme; |
4754 | } |
4755 | } else { |
4756 | /* Seed vport template */ |
4757 | template = &lpfc_vport_template; |
4758 | |
4759 | /* Seed updated value of sg_tablesize */ |
4760 | template->sg_tablesize = lpfc_get_sg_tablesize(phba); |
4761 | } |
4762 | |
4763 | shost = scsi_host_alloc(template, sizeof(struct lpfc_vport)); |
4764 | if (!shost) |
4765 | goto out; |
4766 | |
4767 | vport = (struct lpfc_vport *) shost->hostdata; |
4768 | vport->phba = phba; |
4769 | vport->load_flag |= FC_LOADING; |
4770 | vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI; |
4771 | vport->fc_rscn_flush = 0; |
4772 | lpfc_get_vport_cfgparam(vport); |
4773 | |
4774 | /* Adjust value in vport */ |
4775 | vport->cfg_enable_fc4_type = phba->cfg_enable_fc4_type; |
4776 | |
4777 | shost->unique_id = instance; |
4778 | shost->max_id = LPFC_MAX_TARGET; |
4779 | shost->max_lun = vport->cfg_max_luns; |
4780 | shost->this_id = -1; |
4781 | shost->max_cmd_len = 16; |
4782 | |
4783 | if (phba->sli_rev == LPFC_SLI_REV4) { |
4784 | if (!phba->cfg_fcp_mq_threshold || |
4785 | phba->cfg_fcp_mq_threshold > phba->cfg_hdw_queue) |
4786 | phba->cfg_fcp_mq_threshold = phba->cfg_hdw_queue; |
4787 | |
4788 | shost->nr_hw_queues = min_t(int, 2 * num_possible_nodes(), |
4789 | phba->cfg_fcp_mq_threshold); |
4790 | |
4791 | shost->dma_boundary = |
4792 | phba->sli4_hba.pc_sli4_params.sge_supp_len-1; |
4793 | } else |
4794 | /* SLI-3 has a limited number of hardware queues (3), |
4795 | * thus there is only one for FCP processing. |
4796 | */ |
4797 | shost->nr_hw_queues = 1; |
4798 | |
4799 | /* |
4800 | * Set initial can_queue value since 0 is no longer supported and |
4801 | * scsi_add_host will fail. This will be adjusted later based on the |
4802 | * max xri value determined in hba setup. |
4803 | */ |
4804 | shost->can_queue = phba->cfg_hba_queue_depth - 10; |
4805 | if (dev != &phba->pcidev->dev) { |
4806 | shost->transportt = lpfc_vport_transport_template; |
4807 | vport->port_type = LPFC_NPIV_PORT; |
4808 | } else { |
4809 | shost->transportt = lpfc_transport_template; |
4810 | vport->port_type = LPFC_PHYSICAL_PORT; |
4811 | } |
4812 | |
4813 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP, |
4814 | "9081 CreatePort TMPLATE type %x TBLsize %d " |
4815 | "SEGcnt %d/%d\n" , |
4816 | vport->port_type, shost->sg_tablesize, |
4817 | phba->cfg_scsi_seg_cnt, phba->cfg_sg_seg_cnt); |
4818 | |
4819 | /* Allocate the resources for VMID */ |
4820 | rc = lpfc_vmid_res_alloc(phba, vport); |
4821 | |
4822 | if (rc) |
4823 | goto out_put_shost; |
4824 | |
4825 | /* Initialize all internally managed lists. */ |
4826 | INIT_LIST_HEAD(list: &vport->fc_nodes); |
4827 | INIT_LIST_HEAD(list: &vport->rcv_buffer_list); |
4828 | spin_lock_init(&vport->work_port_lock); |
4829 | |
4830 | timer_setup(&vport->fc_disctmo, lpfc_disc_timeout, 0); |
4831 | |
4832 | timer_setup(&vport->els_tmofunc, lpfc_els_timeout, 0); |
4833 | |
4834 | timer_setup(&vport->delayed_disc_tmo, lpfc_delayed_disc_tmo, 0); |
4835 | |
4836 | if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) |
4837 | lpfc_setup_bg(phba, shost); |
4838 | |
4839 | error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev); |
4840 | if (error) |
4841 | goto out_free_vmid; |
4842 | |
4843 | spin_lock_irq(lock: &phba->port_list_lock); |
4844 | list_add_tail(new: &vport->listentry, head: &phba->port_list); |
4845 | spin_unlock_irq(lock: &phba->port_list_lock); |
4846 | return vport; |
4847 | |
4848 | out_free_vmid: |
4849 | kfree(objp: vport->vmid); |
4850 | bitmap_free(bitmap: vport->vmid_priority_range); |
4851 | out_put_shost: |
4852 | scsi_host_put(t: shost); |
4853 | out: |
4854 | return NULL; |
4855 | } |
4856 | |
4857 | /** |
4858 | * destroy_port - destroy an FC port |
4859 | * @vport: pointer to an lpfc virtual N_Port data structure. |
4860 | * |
4861 | * This routine destroys a FC port from the upper layer protocol. All the |
4862 | * resources associated with the port are released. |
4863 | **/ |
4864 | void |
4865 | destroy_port(struct lpfc_vport *vport) |
4866 | { |
4867 | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); |
4868 | struct lpfc_hba *phba = vport->phba; |
4869 | |
4870 | lpfc_debugfs_terminate(vport); |
4871 | fc_remove_host(shost); |
4872 | scsi_remove_host(shost); |
4873 | |
4874 | spin_lock_irq(lock: &phba->port_list_lock); |
4875 | list_del_init(entry: &vport->listentry); |
4876 | spin_unlock_irq(lock: &phba->port_list_lock); |
4877 | |
4878 | lpfc_cleanup(vport); |
4879 | return; |
4880 | } |
4881 | |
4882 | /** |
4883 | * lpfc_get_instance - Get a unique integer ID |
4884 | * |
4885 | * This routine allocates a unique integer ID from lpfc_hba_index pool. It |
4886 | * uses the kernel idr facility to perform the task. |
4887 | * |
4888 | * Return codes: |
4889 | * instance - a unique integer ID allocated as the new instance. |
4890 | * -1 - lpfc get instance failed. |
4891 | **/ |
4892 | int |
4893 | lpfc_get_instance(void) |
4894 | { |
4895 | int ret; |
4896 | |
4897 | ret = idr_alloc(&lpfc_hba_index, NULL, start: 0, end: 0, GFP_KERNEL); |
4898 | return ret < 0 ? -1 : ret; |
4899 | } |
4900 | |
4901 | /** |
4902 | * lpfc_scan_finished - method for SCSI layer to detect whether scan is done |
4903 | * @shost: pointer to SCSI host data structure. |
4904 | * @time: elapsed time of the scan in jiffies. |
4905 | * |
4906 | * This routine is called by the SCSI layer with a SCSI host to determine |
4907 | * whether the scan host is finished. |
4908 | * |
4909 | * Note: there is no scan_start function as adapter initialization will have |
4910 | * asynchronously kicked off the link initialization. |
4911 | * |
4912 | * Return codes |
4913 | * 0 - SCSI host scan is not over yet. |
4914 | * 1 - SCSI host scan is over. |
4915 | **/ |
4916 | int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time) |
4917 | { |
4918 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
4919 | struct lpfc_hba *phba = vport->phba; |
4920 | int stat = 0; |
4921 | |
4922 | spin_lock_irq(lock: shost->host_lock); |
4923 | |
4924 | if (vport->load_flag & FC_UNLOADING) { |
4925 | stat = 1; |
4926 | goto finished; |
4927 | } |
4928 | if (time >= msecs_to_jiffies(m: 30 * 1000)) { |
4929 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
4930 | "0461 Scanning longer than 30 " |
4931 | "seconds. Continuing initialization\n" ); |
4932 | stat = 1; |
4933 | goto finished; |
4934 | } |
4935 | if (time >= msecs_to_jiffies(m: 15 * 1000) && |
4936 | phba->link_state <= LPFC_LINK_DOWN) { |
4937 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
4938 | "0465 Link down longer than 15 " |
4939 | "seconds. Continuing initialization\n" ); |
4940 | stat = 1; |
4941 | goto finished; |
4942 | } |
4943 | |
4944 | if (vport->port_state != LPFC_VPORT_READY) |
4945 | goto finished; |
4946 | if (vport->num_disc_nodes || vport->fc_prli_sent) |
4947 | goto finished; |
4948 | if (vport->fc_map_cnt == 0 && time < msecs_to_jiffies(m: 2 * 1000)) |
4949 | goto finished; |
4950 | if ((phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) != 0) |
4951 | goto finished; |
4952 | |
4953 | stat = 1; |
4954 | |
4955 | finished: |
4956 | spin_unlock_irq(lock: shost->host_lock); |
4957 | return stat; |
4958 | } |
4959 | |
4960 | static void lpfc_host_supported_speeds_set(struct Scsi_Host *shost) |
4961 | { |
4962 | struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; |
4963 | struct lpfc_hba *phba = vport->phba; |
4964 | |
4965 | fc_host_supported_speeds(shost) = 0; |
4966 | /* |
4967 | * Avoid reporting supported link speed for FCoE as it can't be |
4968 | * controlled via FCoE. |
4969 | */ |
4970 | if (phba->hba_flag & HBA_FCOE_MODE) |
4971 | return; |
4972 | |
4973 | if (phba->lmt & LMT_256Gb) |
4974 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_256GBIT; |
4975 | if (phba->lmt & LMT_128Gb) |
4976 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_128GBIT; |
4977 | if (phba->lmt & LMT_64Gb) |
4978 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT; |
4979 | if (phba->lmt & LMT_32Gb) |
4980 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_32GBIT; |
4981 | if (phba->lmt & LMT_16Gb) |
4982 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_16GBIT; |
4983 | if (phba->lmt & LMT_10Gb) |
4984 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT; |
4985 | if (phba->lmt & LMT_8Gb) |
4986 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_8GBIT; |
4987 | if (phba->lmt & LMT_4Gb) |
4988 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT; |
4989 | if (phba->lmt & LMT_2Gb) |
4990 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT; |
4991 | if (phba->lmt & LMT_1Gb) |
4992 | fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT; |
4993 | } |
4994 | |
4995 | /** |
4996 | * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port |
4997 | * @shost: pointer to SCSI host data structure. |
4998 | * |
4999 | * This routine initializes a given SCSI host attributes on a FC port. The |
5000 | * SCSI host can be either on top of a physical port or a virtual port. |
5001 | **/ |
5002 | void lpfc_host_attrib_init(struct Scsi_Host *shost) |
5003 | { |
5004 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
5005 | struct lpfc_hba *phba = vport->phba; |
5006 | /* |
5007 | * Set fixed host attributes. Must done after lpfc_sli_hba_setup(). |
5008 | */ |
5009 | |
5010 | fc_host_node_name(shost) = wwn_to_u64(wwn: vport->fc_nodename.u.wwn); |
5011 | fc_host_port_name(shost) = wwn_to_u64(wwn: vport->fc_portname.u.wwn); |
5012 | fc_host_supported_classes(shost) = FC_COS_CLASS3; |
5013 | |
5014 | memset(fc_host_supported_fc4s(shost), 0, |
5015 | sizeof(fc_host_supported_fc4s(shost))); |
5016 | fc_host_supported_fc4s(shost)[2] = 1; |
5017 | fc_host_supported_fc4s(shost)[7] = 1; |
5018 | |
5019 | lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost), |
5020 | sizeof fc_host_symbolic_name(shost)); |
5021 | |
5022 | lpfc_host_supported_speeds_set(shost); |
5023 | |
5024 | fc_host_maxframe_size(shost) = |
5025 | (((uint32_t) vport->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | |
5026 | (uint32_t) vport->fc_sparam.cmn.bbRcvSizeLsb; |
5027 | |
5028 | fc_host_dev_loss_tmo(shost) = vport->cfg_devloss_tmo; |
5029 | |
5030 | /* This value is also unchanging */ |
5031 | memset(fc_host_active_fc4s(shost), 0, |
5032 | sizeof(fc_host_active_fc4s(shost))); |
5033 | fc_host_active_fc4s(shost)[2] = 1; |
5034 | fc_host_active_fc4s(shost)[7] = 1; |
5035 | |
5036 | fc_host_max_npiv_vports(shost) = phba->max_vpi; |
5037 | spin_lock_irq(lock: shost->host_lock); |
5038 | vport->load_flag &= ~FC_LOADING; |
5039 | spin_unlock_irq(lock: shost->host_lock); |
5040 | } |
5041 | |
5042 | /** |
5043 | * lpfc_stop_port_s3 - Stop SLI3 device port |
5044 | * @phba: pointer to lpfc hba data structure. |
5045 | * |
5046 | * This routine is invoked to stop an SLI3 device port, it stops the device |
5047 | * from generating interrupts and stops the device driver's timers for the |
5048 | * device. |
5049 | **/ |
5050 | static void |
5051 | lpfc_stop_port_s3(struct lpfc_hba *phba) |
5052 | { |
5053 | /* Clear all interrupt enable conditions */ |
5054 | writel(val: 0, addr: phba->HCregaddr); |
5055 | readl(addr: phba->HCregaddr); /* flush */ |
5056 | /* Clear all pending interrupts */ |
5057 | writel(val: 0xffffffff, addr: phba->HAregaddr); |
5058 | readl(addr: phba->HAregaddr); /* flush */ |
5059 | |
5060 | /* Reset some HBA SLI setup states */ |
5061 | lpfc_stop_hba_timers(phba); |
5062 | phba->pport->work_port_events = 0; |
5063 | } |
5064 | |
5065 | /** |
5066 | * lpfc_stop_port_s4 - Stop SLI4 device port |
5067 | * @phba: pointer to lpfc hba data structure. |
5068 | * |
5069 | * This routine is invoked to stop an SLI4 device port, it stops the device |
5070 | * from generating interrupts and stops the device driver's timers for the |
5071 | * device. |
5072 | **/ |
5073 | static void |
5074 | lpfc_stop_port_s4(struct lpfc_hba *phba) |
5075 | { |
5076 | /* Reset some HBA SLI4 setup states */ |
5077 | lpfc_stop_hba_timers(phba); |
5078 | if (phba->pport) |
5079 | phba->pport->work_port_events = 0; |
5080 | phba->sli4_hba.intr_enable = 0; |
5081 | } |
5082 | |
5083 | /** |
5084 | * lpfc_stop_port - Wrapper function for stopping hba port |
5085 | * @phba: Pointer to HBA context object. |
5086 | * |
5087 | * This routine wraps the actual SLI3 or SLI4 hba stop port routine from |
5088 | * the API jump table function pointer from the lpfc_hba struct. |
5089 | **/ |
5090 | void |
5091 | lpfc_stop_port(struct lpfc_hba *phba) |
5092 | { |
5093 | phba->lpfc_stop_port(phba); |
5094 | |
5095 | if (phba->wq) |
5096 | flush_workqueue(phba->wq); |
5097 | } |
5098 | |
5099 | /** |
5100 | * lpfc_fcf_redisc_wait_start_timer - Start fcf rediscover wait timer |
5101 | * @phba: Pointer to hba for which this call is being executed. |
5102 | * |
5103 | * This routine starts the timer waiting for the FCF rediscovery to complete. |
5104 | **/ |
5105 | void |
5106 | lpfc_fcf_redisc_wait_start_timer(struct lpfc_hba *phba) |
5107 | { |
5108 | unsigned long fcf_redisc_wait_tmo = |
5109 | (jiffies + msecs_to_jiffies(LPFC_FCF_REDISCOVER_WAIT_TMO)); |
5110 | /* Start fcf rediscovery wait period timer */ |
5111 | mod_timer(timer: &phba->fcf.redisc_wait, expires: fcf_redisc_wait_tmo); |
5112 | spin_lock_irq(lock: &phba->hbalock); |
5113 | /* Allow action to new fcf asynchronous event */ |
5114 | phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_SCAN_DONE); |
5115 | /* Mark the FCF rediscovery pending state */ |
5116 | phba->fcf.fcf_flag |= FCF_REDISC_PEND; |
5117 | spin_unlock_irq(lock: &phba->hbalock); |
5118 | } |
5119 | |
5120 | /** |
5121 | * lpfc_sli4_fcf_redisc_wait_tmo - FCF table rediscover wait timeout |
5122 | * @t: Timer context used to obtain the pointer to lpfc hba data structure. |
5123 | * |
5124 | * This routine is invoked when waiting for FCF table rediscover has been |
5125 | * timed out. If new FCF record(s) has (have) been discovered during the |
5126 | * wait period, a new FCF event shall be added to the FCOE async event |
5127 | * list, and then worker thread shall be waked up for processing from the |
5128 | * worker thread context. |
5129 | **/ |
5130 | static void |
5131 | lpfc_sli4_fcf_redisc_wait_tmo(struct timer_list *t) |
5132 | { |
5133 | struct lpfc_hba *phba = from_timer(phba, t, fcf.redisc_wait); |
5134 | |
5135 | /* Don't send FCF rediscovery event if timer cancelled */ |
5136 | spin_lock_irq(lock: &phba->hbalock); |
5137 | if (!(phba->fcf.fcf_flag & FCF_REDISC_PEND)) { |
5138 | spin_unlock_irq(lock: &phba->hbalock); |
5139 | return; |
5140 | } |
5141 | /* Clear FCF rediscovery timer pending flag */ |
5142 | phba->fcf.fcf_flag &= ~FCF_REDISC_PEND; |
5143 | /* FCF rediscovery event to worker thread */ |
5144 | phba->fcf.fcf_flag |= FCF_REDISC_EVT; |
5145 | spin_unlock_irq(lock: &phba->hbalock); |
5146 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP, |
5147 | "2776 FCF rediscover quiescent timer expired\n" ); |
5148 | /* wake up worker thread */ |
5149 | lpfc_worker_wake_up(phba); |
5150 | } |
5151 | |
5152 | /** |
5153 | * lpfc_vmid_poll - VMID timeout detection |
5154 | * @t: Timer context used to obtain the pointer to lpfc hba data structure. |
5155 | * |
5156 | * This routine is invoked when there is no I/O on by a VM for the specified |
5157 | * amount of time. When this situation is detected, the VMID has to be |
5158 | * deregistered from the switch and all the local resources freed. The VMID |
5159 | * will be reassigned to the VM once the I/O begins. |
5160 | **/ |
5161 | static void |
5162 | lpfc_vmid_poll(struct timer_list *t) |
5163 | { |
5164 | struct lpfc_hba *phba = from_timer(phba, t, inactive_vmid_poll); |
5165 | u32 wake_up = 0; |
5166 | |
5167 | /* check if there is a need to issue QFPA */ |
5168 | if (phba->pport->vmid_priority_tagging) { |
5169 | wake_up = 1; |
5170 | phba->pport->work_port_events |= WORKER_CHECK_VMID_ISSUE_QFPA; |
5171 | } |
5172 | |
5173 | /* Is the vmid inactivity timer enabled */ |
5174 | if (phba->pport->vmid_inactivity_timeout || |
5175 | phba->pport->load_flag & FC_DEREGISTER_ALL_APP_ID) { |
5176 | wake_up = 1; |
5177 | phba->pport->work_port_events |= WORKER_CHECK_INACTIVE_VMID; |
5178 | } |
5179 | |
5180 | if (wake_up) |
5181 | lpfc_worker_wake_up(phba); |
5182 | |
5183 | /* restart the timer for the next iteration */ |
5184 | mod_timer(timer: &phba->inactive_vmid_poll, expires: jiffies + msecs_to_jiffies(m: 1000 * |
5185 | LPFC_VMID_TIMER)); |
5186 | } |
5187 | |
5188 | /** |
5189 | * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code |
5190 | * @phba: pointer to lpfc hba data structure. |
5191 | * @acqe_link: pointer to the async link completion queue entry. |
5192 | * |
5193 | * This routine is to parse the SLI4 link-attention link fault code. |
5194 | **/ |
5195 | static void |
5196 | lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba, |
5197 | struct lpfc_acqe_link *acqe_link) |
5198 | { |
5199 | switch (bf_get(lpfc_acqe_fc_la_att_type, acqe_link)) { |
5200 | case LPFC_FC_LA_TYPE_LINK_DOWN: |
5201 | case LPFC_FC_LA_TYPE_TRUNKING_EVENT: |
5202 | case LPFC_FC_LA_TYPE_ACTIVATE_FAIL: |
5203 | case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT: |
5204 | break; |
5205 | default: |
5206 | switch (bf_get(lpfc_acqe_link_fault, acqe_link)) { |
5207 | case LPFC_ASYNC_LINK_FAULT_NONE: |
5208 | case LPFC_ASYNC_LINK_FAULT_LOCAL: |
5209 | case LPFC_ASYNC_LINK_FAULT_REMOTE: |
5210 | case LPFC_ASYNC_LINK_FAULT_LR_LRR: |
5211 | break; |
5212 | default: |
5213 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
5214 | "0398 Unknown link fault code: x%x\n" , |
5215 | bf_get(lpfc_acqe_link_fault, acqe_link)); |
5216 | break; |
5217 | } |
5218 | break; |
5219 | } |
5220 | } |
5221 | |
5222 | /** |
5223 | * lpfc_sli4_parse_latt_type - Parse sli4 link attention type |
5224 | * @phba: pointer to lpfc hba data structure. |
5225 | * @acqe_link: pointer to the async link completion queue entry. |
5226 | * |
5227 | * This routine is to parse the SLI4 link attention type and translate it |
5228 | * into the base driver's link attention type coding. |
5229 | * |
5230 | * Return: Link attention type in terms of base driver's coding. |
5231 | **/ |
5232 | static uint8_t |
5233 | lpfc_sli4_parse_latt_type(struct lpfc_hba *phba, |
5234 | struct lpfc_acqe_link *acqe_link) |
5235 | { |
5236 | uint8_t att_type; |
5237 | |
5238 | switch (bf_get(lpfc_acqe_link_status, acqe_link)) { |
5239 | case LPFC_ASYNC_LINK_STATUS_DOWN: |
5240 | case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN: |
5241 | att_type = LPFC_ATT_LINK_DOWN; |
5242 | break; |
5243 | case LPFC_ASYNC_LINK_STATUS_UP: |
5244 | /* Ignore physical link up events - wait for logical link up */ |
5245 | att_type = LPFC_ATT_RESERVED; |
5246 | break; |
5247 | case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP: |
5248 | att_type = LPFC_ATT_LINK_UP; |
5249 | break; |
5250 | default: |
5251 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
5252 | "0399 Invalid link attention type: x%x\n" , |
5253 | bf_get(lpfc_acqe_link_status, acqe_link)); |
5254 | att_type = LPFC_ATT_RESERVED; |
5255 | break; |
5256 | } |
5257 | return att_type; |
5258 | } |
5259 | |
5260 | /** |
5261 | * lpfc_sli_port_speed_get - Get sli3 link speed code to link speed |
5262 | * @phba: pointer to lpfc hba data structure. |
5263 | * |
5264 | * This routine is to get an SLI3 FC port's link speed in Mbps. |
5265 | * |
5266 | * Return: link speed in terms of Mbps. |
5267 | **/ |
5268 | uint32_t |
5269 | lpfc_sli_port_speed_get(struct lpfc_hba *phba) |
5270 | { |
5271 | uint32_t link_speed; |
5272 | |
5273 | if (!lpfc_is_link_up(phba)) |
5274 | return 0; |
5275 | |
5276 | if (phba->sli_rev <= LPFC_SLI_REV3) { |
5277 | switch (phba->fc_linkspeed) { |
5278 | case LPFC_LINK_SPEED_1GHZ: |
5279 | link_speed = 1000; |
5280 | break; |
5281 | case LPFC_LINK_SPEED_2GHZ: |
5282 | link_speed = 2000; |
5283 | break; |
5284 | case LPFC_LINK_SPEED_4GHZ: |
5285 | link_speed = 4000; |
5286 | break; |
5287 | case LPFC_LINK_SPEED_8GHZ: |
5288 | link_speed = 8000; |
5289 | break; |
5290 | case LPFC_LINK_SPEED_10GHZ: |
5291 | link_speed = 10000; |
5292 | break; |
5293 | case LPFC_LINK_SPEED_16GHZ: |
5294 | link_speed = 16000; |
5295 | break; |
5296 | default: |
5297 | link_speed = 0; |
5298 | } |
5299 | } else { |
5300 | if (phba->sli4_hba.link_state.logical_speed) |
5301 | link_speed = |
5302 | phba->sli4_hba.link_state.logical_speed; |
5303 | else |
5304 | link_speed = phba->sli4_hba.link_state.speed; |
5305 | } |
5306 | return link_speed; |
5307 | } |
5308 | |
5309 | /** |
5310 | * lpfc_sli4_port_speed_parse - Parse async evt link speed code to link speed |
5311 | * @phba: pointer to lpfc hba data structure. |
5312 | * @evt_code: asynchronous event code. |
5313 | * @speed_code: asynchronous event link speed code. |
5314 | * |
5315 | * This routine is to parse the giving SLI4 async event link speed code into |
5316 | * value of Mbps for the link speed. |
5317 | * |
5318 | * Return: link speed in terms of Mbps. |
5319 | **/ |
5320 | static uint32_t |
5321 | lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code, |
5322 | uint8_t speed_code) |
5323 | { |
5324 | uint32_t port_speed; |
5325 | |
5326 | switch (evt_code) { |
5327 | case LPFC_TRAILER_CODE_LINK: |
5328 | switch (speed_code) { |
5329 | case LPFC_ASYNC_LINK_SPEED_ZERO: |
5330 | port_speed = 0; |
5331 | break; |
5332 | case LPFC_ASYNC_LINK_SPEED_10MBPS: |
5333 | port_speed = 10; |
5334 | break; |
5335 | case LPFC_ASYNC_LINK_SPEED_100MBPS: |
5336 | port_speed = 100; |
5337 | break; |
5338 | case LPFC_ASYNC_LINK_SPEED_1GBPS: |
5339 | port_speed = 1000; |
5340 | break; |
5341 | case LPFC_ASYNC_LINK_SPEED_10GBPS: |
5342 | port_speed = 10000; |
5343 | break; |
5344 | case LPFC_ASYNC_LINK_SPEED_20GBPS: |
5345 | port_speed = 20000; |
5346 | break; |
5347 | case LPFC_ASYNC_LINK_SPEED_25GBPS: |
5348 | port_speed = 25000; |
5349 | break; |
5350 | case LPFC_ASYNC_LINK_SPEED_40GBPS: |
5351 | port_speed = 40000; |
5352 | break; |
5353 | case LPFC_ASYNC_LINK_SPEED_100GBPS: |
5354 | port_speed = 100000; |
5355 | break; |
5356 | default: |
5357 | port_speed = 0; |
5358 | } |
5359 | break; |
5360 | case LPFC_TRAILER_CODE_FC: |
5361 | switch (speed_code) { |
5362 | case LPFC_FC_LA_SPEED_UNKNOWN: |
5363 | port_speed = 0; |
5364 | break; |
5365 | case LPFC_FC_LA_SPEED_1G: |
5366 | port_speed = 1000; |
5367 | break; |
5368 | case LPFC_FC_LA_SPEED_2G: |
5369 | port_speed = 2000; |
5370 | break; |
5371 | case LPFC_FC_LA_SPEED_4G: |
5372 | port_speed = 4000; |
5373 | break; |
5374 | case LPFC_FC_LA_SPEED_8G: |
5375 | port_speed = 8000; |
5376 | break; |
5377 | case LPFC_FC_LA_SPEED_10G: |
5378 | port_speed = 10000; |
5379 | break; |
5380 | case LPFC_FC_LA_SPEED_16G: |
5381 | port_speed = 16000; |
5382 | break; |
5383 | case LPFC_FC_LA_SPEED_32G: |
5384 | port_speed = 32000; |
5385 | break; |
5386 | case LPFC_FC_LA_SPEED_64G: |
5387 | port_speed = 64000; |
5388 | break; |
5389 | case LPFC_FC_LA_SPEED_128G: |
5390 | port_speed = 128000; |
5391 | break; |
5392 | case LPFC_FC_LA_SPEED_256G: |
5393 | port_speed = 256000; |
5394 | break; |
5395 | default: |
5396 | port_speed = 0; |
5397 | } |
5398 | break; |
5399 | default: |
5400 | port_speed = 0; |
5401 | } |
5402 | return port_speed; |
5403 | } |
5404 | |
5405 | /** |
5406 | * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event |
5407 | * @phba: pointer to lpfc hba data structure. |
5408 | * @acqe_link: pointer to the async link completion queue entry. |
5409 | * |
5410 | * This routine is to handle the SLI4 asynchronous FCoE link event. |
5411 | **/ |
5412 | static void |
5413 | lpfc_sli4_async_link_evt(struct lpfc_hba *phba, |
5414 | struct lpfc_acqe_link *acqe_link) |
5415 | { |
5416 | LPFC_MBOXQ_t *pmb; |
5417 | MAILBOX_t *mb; |
5418 | struct lpfc_mbx_read_top *la; |
5419 | uint8_t att_type; |
5420 | int rc; |
5421 | |
5422 | att_type = lpfc_sli4_parse_latt_type(phba, acqe_link); |
5423 | if (att_type != LPFC_ATT_LINK_DOWN && att_type != LPFC_ATT_LINK_UP) |
5424 | return; |
5425 | phba->fcoe_eventtag = acqe_link->event_tag; |
5426 | pmb = (LPFC_MBOXQ_t *)mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
5427 | if (!pmb) { |
5428 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
5429 | "0395 The mboxq allocation failed\n" ); |
5430 | return; |
5431 | } |
5432 | |
5433 | rc = lpfc_mbox_rsrc_prep(phba, mbox: pmb); |
5434 | if (rc) { |
5435 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
5436 | "0396 mailbox allocation failed\n" ); |
5437 | goto out_free_pmb; |
5438 | } |
5439 | |
5440 | /* Cleanup any outstanding ELS commands */ |
5441 | lpfc_els_flush_all_cmd(phba); |
5442 | |
5443 | /* Block ELS IOCBs until we have done process link event */ |
5444 | phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT; |
5445 | |
5446 | /* Update link event statistics */ |
5447 | phba->sli.slistat.link_event++; |
5448 | |
5449 | /* Create lpfc_handle_latt mailbox command from link ACQE */ |
5450 | lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf); |
5451 | pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology; |
5452 | pmb->vport = phba->pport; |
5453 | |
5454 | /* Keep the link status for extra SLI4 state machine reference */ |
5455 | phba->sli4_hba.link_state.speed = |
5456 | lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_LINK, |
5457 | bf_get(lpfc_acqe_link_speed, acqe_link)); |
5458 | phba->sli4_hba.link_state.duplex = |
5459 | bf_get(lpfc_acqe_link_duplex, acqe_link); |
5460 | phba->sli4_hba.link_state.status = |
5461 | bf_get(lpfc_acqe_link_status, acqe_link); |
5462 | phba->sli4_hba.link_state.type = |
5463 | bf_get(lpfc_acqe_link_type, acqe_link); |
5464 | phba->sli4_hba.link_state.number = |
5465 | bf_get(lpfc_acqe_link_number, acqe_link); |
5466 | phba->sli4_hba.link_state.fault = |
5467 | bf_get(lpfc_acqe_link_fault, acqe_link); |
5468 | phba->sli4_hba.link_state.logical_speed = |
5469 | bf_get(lpfc_acqe_logical_link_speed, acqe_link) * 10; |
5470 | |
5471 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
5472 | "2900 Async FC/FCoE Link event - Speed:%dGBit " |
5473 | "duplex:x%x LA Type:x%x Port Type:%d Port Number:%d " |
5474 | "Logical speed:%dMbps Fault:%d\n" , |
5475 | phba->sli4_hba.link_state.speed, |
5476 | phba->sli4_hba.link_state.topology, |
5477 | phba->sli4_hba.link_state.status, |
5478 | phba->sli4_hba.link_state.type, |
5479 | phba->sli4_hba.link_state.number, |
5480 | phba->sli4_hba.link_state.logical_speed, |
5481 | phba->sli4_hba.link_state.fault); |
5482 | /* |
5483 | * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch |
5484 | * topology info. Note: Optional for non FC-AL ports. |
5485 | */ |
5486 | if (!(phba->hba_flag & HBA_FCOE_MODE)) { |
5487 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
5488 | if (rc == MBX_NOT_FINISHED) |
5489 | goto out_free_pmb; |
5490 | return; |
5491 | } |
5492 | /* |
5493 | * For FCoE Mode: fill in all the topology information we need and call |
5494 | * the READ_TOPOLOGY completion routine to continue without actually |
5495 | * sending the READ_TOPOLOGY mailbox command to the port. |
5496 | */ |
5497 | /* Initialize completion status */ |
5498 | mb = &pmb->u.mb; |
5499 | mb->mbxStatus = MBX_SUCCESS; |
5500 | |
5501 | /* Parse port fault information field */ |
5502 | lpfc_sli4_parse_latt_fault(phba, acqe_link); |
5503 | |
5504 | /* Parse and translate link attention fields */ |
5505 | la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop; |
5506 | la->eventTag = acqe_link->event_tag; |
5507 | bf_set(lpfc_mbx_read_top_att_type, la, att_type); |
5508 | bf_set(lpfc_mbx_read_top_link_spd, la, |
5509 | (bf_get(lpfc_acqe_link_speed, acqe_link))); |
5510 | |
5511 | /* Fake the following irrelevant fields */ |
5512 | bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT); |
5513 | bf_set(lpfc_mbx_read_top_alpa_granted, la, 0); |
5514 | bf_set(lpfc_mbx_read_top_il, la, 0); |
5515 | bf_set(lpfc_mbx_read_top_pb, la, 0); |
5516 | bf_set(lpfc_mbx_read_top_fa, la, 0); |
5517 | bf_set(lpfc_mbx_read_top_mm, la, 0); |
5518 | |
5519 | /* Invoke the lpfc_handle_latt mailbox command callback function */ |
5520 | lpfc_mbx_cmpl_read_topology(phba, pmb); |
5521 | |
5522 | return; |
5523 | |
5524 | out_free_pmb: |
5525 | lpfc_mbox_rsrc_cleanup(phba, mbox: pmb, locked: MBOX_THD_UNLOCKED); |
5526 | } |
5527 | |
5528 | /** |
5529 | * lpfc_async_link_speed_to_read_top - Parse async evt link speed code to read |
5530 | * topology. |
5531 | * @phba: pointer to lpfc hba data structure. |
5532 | * @speed_code: asynchronous event link speed code. |
5533 | * |
5534 | * This routine is to parse the giving SLI4 async event link speed code into |
5535 | * value of Read topology link speed. |
5536 | * |
5537 | * Return: link speed in terms of Read topology. |
5538 | **/ |
5539 | static uint8_t |
5540 | lpfc_async_link_speed_to_read_top(struct lpfc_hba *phba, uint8_t speed_code) |
5541 | { |
5542 | uint8_t port_speed; |
5543 | |
5544 | switch (speed_code) { |
5545 | case LPFC_FC_LA_SPEED_1G: |
5546 | port_speed = LPFC_LINK_SPEED_1GHZ; |
5547 | break; |
5548 | case LPFC_FC_LA_SPEED_2G: |
5549 | port_speed = LPFC_LINK_SPEED_2GHZ; |
5550 | break; |
5551 | case LPFC_FC_LA_SPEED_4G: |
5552 | port_speed = LPFC_LINK_SPEED_4GHZ; |
5553 | break; |
5554 | case LPFC_FC_LA_SPEED_8G: |
5555 | port_speed = LPFC_LINK_SPEED_8GHZ; |
5556 | break; |
5557 | case LPFC_FC_LA_SPEED_16G: |
5558 | port_speed = LPFC_LINK_SPEED_16GHZ; |
5559 | break; |
5560 | case LPFC_FC_LA_SPEED_32G: |
5561 | port_speed = LPFC_LINK_SPEED_32GHZ; |
5562 | break; |
5563 | case LPFC_FC_LA_SPEED_64G: |
5564 | port_speed = LPFC_LINK_SPEED_64GHZ; |
5565 | break; |
5566 | case LPFC_FC_LA_SPEED_128G: |
5567 | port_speed = LPFC_LINK_SPEED_128GHZ; |
5568 | break; |
5569 | case LPFC_FC_LA_SPEED_256G: |
5570 | port_speed = LPFC_LINK_SPEED_256GHZ; |
5571 | break; |
5572 | default: |
5573 | port_speed = 0; |
5574 | break; |
5575 | } |
5576 | |
5577 | return port_speed; |
5578 | } |
5579 | |
5580 | void |
5581 | lpfc_cgn_dump_rxmonitor(struct lpfc_hba *phba) |
5582 | { |
5583 | if (!phba->rx_monitor) { |
5584 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5585 | "4411 Rx Monitor Info is empty.\n" ); |
5586 | } else { |
5587 | lpfc_rx_monitor_report(phba, rx_monitor: phba->rx_monitor, NULL, buf_len: 0, |
5588 | LPFC_MAX_RXMONITOR_DUMP); |
5589 | } |
5590 | } |
5591 | |
5592 | /** |
5593 | * lpfc_cgn_update_stat - Save data into congestion stats buffer |
5594 | * @phba: pointer to lpfc hba data structure. |
5595 | * @dtag: FPIN descriptor received |
5596 | * |
5597 | * Increment the FPIN received counter/time when it happens. |
5598 | */ |
5599 | void |
5600 | lpfc_cgn_update_stat(struct lpfc_hba *phba, uint32_t dtag) |
5601 | { |
5602 | struct lpfc_cgn_info *cp; |
5603 | u32 value; |
5604 | |
5605 | /* Make sure we have a congestion info buffer */ |
5606 | if (!phba->cgn_i) |
5607 | return; |
5608 | cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; |
5609 | |
5610 | /* Update congestion statistics */ |
5611 | switch (dtag) { |
5612 | case ELS_DTAG_LNK_INTEGRITY: |
5613 | le32_add_cpu(var: &cp->link_integ_notification, val: 1); |
5614 | lpfc_cgn_update_tstamp(phba, ts: &cp->stat_lnk); |
5615 | break; |
5616 | case ELS_DTAG_DELIVERY: |
5617 | le32_add_cpu(var: &cp->delivery_notification, val: 1); |
5618 | lpfc_cgn_update_tstamp(phba, ts: &cp->stat_delivery); |
5619 | break; |
5620 | case ELS_DTAG_PEER_CONGEST: |
5621 | le32_add_cpu(var: &cp->cgn_peer_notification, val: 1); |
5622 | lpfc_cgn_update_tstamp(phba, ts: &cp->stat_peer); |
5623 | break; |
5624 | case ELS_DTAG_CONGESTION: |
5625 | le32_add_cpu(var: &cp->cgn_notification, val: 1); |
5626 | lpfc_cgn_update_tstamp(phba, ts: &cp->stat_fpin); |
5627 | } |
5628 | if (phba->cgn_fpin_frequency && |
5629 | phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { |
5630 | value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; |
5631 | cp->cgn_stat_npm = value; |
5632 | } |
5633 | |
5634 | value = lpfc_cgn_calc_crc32(bufp: cp, LPFC_CGN_INFO_SZ, |
5635 | LPFC_CGN_CRC32_SEED); |
5636 | cp->cgn_info_crc = cpu_to_le32(value); |
5637 | } |
5638 | |
5639 | /** |
5640 | * lpfc_cgn_update_tstamp - Update cmf timestamp |
5641 | * @phba: pointer to lpfc hba data structure. |
5642 | * @ts: structure to write the timestamp to. |
5643 | */ |
5644 | void |
5645 | lpfc_cgn_update_tstamp(struct lpfc_hba *phba, struct lpfc_cgn_ts *ts) |
5646 | { |
5647 | struct timespec64 cur_time; |
5648 | struct tm tm_val; |
5649 | |
5650 | ktime_get_real_ts64(tv: &cur_time); |
5651 | time64_to_tm(totalsecs: cur_time.tv_sec, offset: 0, result: &tm_val); |
5652 | |
5653 | ts->month = tm_val.tm_mon + 1; |
5654 | ts->day = tm_val.tm_mday; |
5655 | ts->year = tm_val.tm_year - 100; |
5656 | ts->hour = tm_val.tm_hour; |
5657 | ts->minute = tm_val.tm_min; |
5658 | ts->second = tm_val.tm_sec; |
5659 | |
5660 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5661 | "2646 Updated CMF timestamp : " |
5662 | "%u/%u/%u %u:%u:%u\n" , |
5663 | ts->day, ts->month, |
5664 | ts->year, ts->hour, |
5665 | ts->minute, ts->second); |
5666 | } |
5667 | |
5668 | /** |
5669 | * lpfc_cmf_stats_timer - Save data into registered congestion buffer |
5670 | * @timer: Timer cookie to access lpfc private data |
5671 | * |
5672 | * Save the congestion event data every minute. |
5673 | * On the hour collapse all the minute data into hour data. Every day |
5674 | * collapse all the hour data into daily data. Separate driver |
5675 | * and fabrc congestion event counters that will be saved out |
5676 | * to the registered congestion buffer every minute. |
5677 | */ |
5678 | static enum hrtimer_restart |
5679 | lpfc_cmf_stats_timer(struct hrtimer *timer) |
5680 | { |
5681 | struct lpfc_hba *phba; |
5682 | struct lpfc_cgn_info *cp; |
5683 | uint32_t i, index; |
5684 | uint16_t value, mvalue; |
5685 | uint64_t bps; |
5686 | uint32_t mbps; |
5687 | uint32_t dvalue, wvalue, lvalue, avalue; |
5688 | uint64_t latsum; |
5689 | __le16 *ptr; |
5690 | __le32 *lptr; |
5691 | __le16 *mptr; |
5692 | |
5693 | phba = container_of(timer, struct lpfc_hba, cmf_stats_timer); |
5694 | /* Make sure we have a congestion info buffer */ |
5695 | if (!phba->cgn_i) |
5696 | return HRTIMER_NORESTART; |
5697 | cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; |
5698 | |
5699 | phba->cgn_evt_timestamp = jiffies + |
5700 | msecs_to_jiffies(LPFC_CGN_TIMER_TO_MIN); |
5701 | phba->cgn_evt_minute++; |
5702 | |
5703 | /* We should get to this point in the routine on 1 minute intervals */ |
5704 | lpfc_cgn_update_tstamp(phba, ts: &cp->base_time); |
5705 | |
5706 | if (phba->cgn_fpin_frequency && |
5707 | phba->cgn_fpin_frequency != LPFC_FPIN_INIT_FREQ) { |
5708 | value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency; |
5709 | cp->cgn_stat_npm = value; |
5710 | } |
5711 | |
5712 | /* Read and clear the latency counters for this minute */ |
5713 | lvalue = atomic_read(v: &phba->cgn_latency_evt_cnt); |
5714 | latsum = atomic64_read(v: &phba->cgn_latency_evt); |
5715 | atomic_set(v: &phba->cgn_latency_evt_cnt, i: 0); |
5716 | atomic64_set(v: &phba->cgn_latency_evt, i: 0); |
5717 | |
5718 | /* We need to store MB/sec bandwidth in the congestion information. |
5719 | * block_cnt is count of 512 byte blocks for the entire minute, |
5720 | * bps will get bytes per sec before finally converting to MB/sec. |
5721 | */ |
5722 | bps = div_u64(dividend: phba->rx_block_cnt, LPFC_SEC_MIN) * 512; |
5723 | phba->rx_block_cnt = 0; |
5724 | mvalue = bps / (1024 * 1024); /* convert to MB/sec */ |
5725 | |
5726 | /* Every minute */ |
5727 | /* cgn parameters */ |
5728 | cp->cgn_info_mode = phba->cgn_p.cgn_param_mode; |
5729 | cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0; |
5730 | cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1; |
5731 | cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2; |
5732 | |
5733 | /* Fill in default LUN qdepth */ |
5734 | value = (uint16_t)(phba->pport->cfg_lun_queue_depth); |
5735 | cp->cgn_lunq = cpu_to_le16(value); |
5736 | |
5737 | /* Record congestion buffer info - every minute |
5738 | * cgn_driver_evt_cnt (Driver events) |
5739 | * cgn_fabric_warn_cnt (Congestion Warnings) |
5740 | * cgn_latency_evt_cnt / cgn_latency_evt (IO Latency) |
5741 | * cgn_fabric_alarm_cnt (Congestion Alarms) |
5742 | */ |
5743 | index = ++cp->cgn_index_minute; |
5744 | if (cp->cgn_index_minute == LPFC_MIN_HOUR) { |
5745 | cp->cgn_index_minute = 0; |
5746 | index = 0; |
5747 | } |
5748 | |
5749 | /* Get the number of driver events in this sample and reset counter */ |
5750 | dvalue = atomic_read(v: &phba->cgn_driver_evt_cnt); |
5751 | atomic_set(v: &phba->cgn_driver_evt_cnt, i: 0); |
5752 | |
5753 | /* Get the number of warning events - FPIN and Signal for this minute */ |
5754 | wvalue = 0; |
5755 | if ((phba->cgn_reg_fpin & LPFC_CGN_FPIN_WARN) || |
5756 | phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY || |
5757 | phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) |
5758 | wvalue = atomic_read(v: &phba->cgn_fabric_warn_cnt); |
5759 | atomic_set(v: &phba->cgn_fabric_warn_cnt, i: 0); |
5760 | |
5761 | /* Get the number of alarm events - FPIN and Signal for this minute */ |
5762 | avalue = 0; |
5763 | if ((phba->cgn_reg_fpin & LPFC_CGN_FPIN_ALARM) || |
5764 | phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) |
5765 | avalue = atomic_read(v: &phba->cgn_fabric_alarm_cnt); |
5766 | atomic_set(v: &phba->cgn_fabric_alarm_cnt, i: 0); |
5767 | |
5768 | /* Collect the driver, warning, alarm and latency counts for this |
5769 | * minute into the driver congestion buffer. |
5770 | */ |
5771 | ptr = &cp->cgn_drvr_min[index]; |
5772 | value = (uint16_t)dvalue; |
5773 | *ptr = cpu_to_le16(value); |
5774 | |
5775 | ptr = &cp->cgn_warn_min[index]; |
5776 | value = (uint16_t)wvalue; |
5777 | *ptr = cpu_to_le16(value); |
5778 | |
5779 | ptr = &cp->cgn_alarm_min[index]; |
5780 | value = (uint16_t)avalue; |
5781 | *ptr = cpu_to_le16(value); |
5782 | |
5783 | lptr = &cp->cgn_latency_min[index]; |
5784 | if (lvalue) { |
5785 | lvalue = (uint32_t)div_u64(dividend: latsum, divisor: lvalue); |
5786 | *lptr = cpu_to_le32(lvalue); |
5787 | } else { |
5788 | *lptr = 0; |
5789 | } |
5790 | |
5791 | /* Collect the bandwidth value into the driver's congesion buffer. */ |
5792 | mptr = &cp->cgn_bw_min[index]; |
5793 | *mptr = cpu_to_le16(mvalue); |
5794 | |
5795 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5796 | "2418 Congestion Info - minute (%d): %d %d %d %d %d\n" , |
5797 | index, dvalue, wvalue, *lptr, mvalue, avalue); |
5798 | |
5799 | /* Every hour */ |
5800 | if ((phba->cgn_evt_minute % LPFC_MIN_HOUR) == 0) { |
5801 | /* Record congestion buffer info - every hour |
5802 | * Collapse all minutes into an hour |
5803 | */ |
5804 | index = ++cp->cgn_index_hour; |
5805 | if (cp->cgn_index_hour == LPFC_HOUR_DAY) { |
5806 | cp->cgn_index_hour = 0; |
5807 | index = 0; |
5808 | } |
5809 | |
5810 | dvalue = 0; |
5811 | wvalue = 0; |
5812 | lvalue = 0; |
5813 | avalue = 0; |
5814 | mvalue = 0; |
5815 | mbps = 0; |
5816 | for (i = 0; i < LPFC_MIN_HOUR; i++) { |
5817 | dvalue += le16_to_cpu(cp->cgn_drvr_min[i]); |
5818 | wvalue += le16_to_cpu(cp->cgn_warn_min[i]); |
5819 | lvalue += le32_to_cpu(cp->cgn_latency_min[i]); |
5820 | mbps += le16_to_cpu(cp->cgn_bw_min[i]); |
5821 | avalue += le16_to_cpu(cp->cgn_alarm_min[i]); |
5822 | } |
5823 | if (lvalue) /* Avg of latency averages */ |
5824 | lvalue /= LPFC_MIN_HOUR; |
5825 | if (mbps) /* Avg of Bandwidth averages */ |
5826 | mvalue = mbps / LPFC_MIN_HOUR; |
5827 | |
5828 | lptr = &cp->cgn_drvr_hr[index]; |
5829 | *lptr = cpu_to_le32(dvalue); |
5830 | lptr = &cp->cgn_warn_hr[index]; |
5831 | *lptr = cpu_to_le32(wvalue); |
5832 | lptr = &cp->cgn_latency_hr[index]; |
5833 | *lptr = cpu_to_le32(lvalue); |
5834 | mptr = &cp->cgn_bw_hr[index]; |
5835 | *mptr = cpu_to_le16(mvalue); |
5836 | lptr = &cp->cgn_alarm_hr[index]; |
5837 | *lptr = cpu_to_le32(avalue); |
5838 | |
5839 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5840 | "2419 Congestion Info - hour " |
5841 | "(%d): %d %d %d %d %d\n" , |
5842 | index, dvalue, wvalue, lvalue, mvalue, avalue); |
5843 | } |
5844 | |
5845 | /* Every day */ |
5846 | if ((phba->cgn_evt_minute % LPFC_MIN_DAY) == 0) { |
5847 | /* Record congestion buffer info - every hour |
5848 | * Collapse all hours into a day. Rotate days |
5849 | * after LPFC_MAX_CGN_DAYS. |
5850 | */ |
5851 | index = ++cp->cgn_index_day; |
5852 | if (cp->cgn_index_day == LPFC_MAX_CGN_DAYS) { |
5853 | cp->cgn_index_day = 0; |
5854 | index = 0; |
5855 | } |
5856 | |
5857 | dvalue = 0; |
5858 | wvalue = 0; |
5859 | lvalue = 0; |
5860 | mvalue = 0; |
5861 | mbps = 0; |
5862 | avalue = 0; |
5863 | for (i = 0; i < LPFC_HOUR_DAY; i++) { |
5864 | dvalue += le32_to_cpu(cp->cgn_drvr_hr[i]); |
5865 | wvalue += le32_to_cpu(cp->cgn_warn_hr[i]); |
5866 | lvalue += le32_to_cpu(cp->cgn_latency_hr[i]); |
5867 | mbps += le16_to_cpu(cp->cgn_bw_hr[i]); |
5868 | avalue += le32_to_cpu(cp->cgn_alarm_hr[i]); |
5869 | } |
5870 | if (lvalue) /* Avg of latency averages */ |
5871 | lvalue /= LPFC_HOUR_DAY; |
5872 | if (mbps) /* Avg of Bandwidth averages */ |
5873 | mvalue = mbps / LPFC_HOUR_DAY; |
5874 | |
5875 | lptr = &cp->cgn_drvr_day[index]; |
5876 | *lptr = cpu_to_le32(dvalue); |
5877 | lptr = &cp->cgn_warn_day[index]; |
5878 | *lptr = cpu_to_le32(wvalue); |
5879 | lptr = &cp->cgn_latency_day[index]; |
5880 | *lptr = cpu_to_le32(lvalue); |
5881 | mptr = &cp->cgn_bw_day[index]; |
5882 | *mptr = cpu_to_le16(mvalue); |
5883 | lptr = &cp->cgn_alarm_day[index]; |
5884 | *lptr = cpu_to_le32(avalue); |
5885 | |
5886 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5887 | "2420 Congestion Info - daily (%d): " |
5888 | "%d %d %d %d %d\n" , |
5889 | index, dvalue, wvalue, lvalue, mvalue, avalue); |
5890 | } |
5891 | |
5892 | /* Use the frequency found in the last rcv'ed FPIN */ |
5893 | value = phba->cgn_fpin_frequency; |
5894 | cp->cgn_warn_freq = cpu_to_le16(value); |
5895 | cp->cgn_alarm_freq = cpu_to_le16(value); |
5896 | |
5897 | lvalue = lpfc_cgn_calc_crc32(bufp: cp, LPFC_CGN_INFO_SZ, |
5898 | LPFC_CGN_CRC32_SEED); |
5899 | cp->cgn_info_crc = cpu_to_le32(lvalue); |
5900 | |
5901 | hrtimer_forward_now(timer, interval: ktime_set(secs: 0, LPFC_SEC_MIN * NSEC_PER_SEC)); |
5902 | |
5903 | return HRTIMER_RESTART; |
5904 | } |
5905 | |
5906 | /** |
5907 | * lpfc_calc_cmf_latency - latency from start of rxate timer interval |
5908 | * @phba: The Hba for which this call is being executed. |
5909 | * |
5910 | * The routine calculates the latency from the beginning of the CMF timer |
5911 | * interval to the current point in time. It is called from IO completion |
5912 | * when we exceed our Bandwidth limitation for the time interval. |
5913 | */ |
5914 | uint32_t |
5915 | lpfc_calc_cmf_latency(struct lpfc_hba *phba) |
5916 | { |
5917 | struct timespec64 cmpl_time; |
5918 | uint32_t msec = 0; |
5919 | |
5920 | ktime_get_real_ts64(tv: &cmpl_time); |
5921 | |
5922 | /* This routine works on a ms granularity so sec and usec are |
5923 | * converted accordingly. |
5924 | */ |
5925 | if (cmpl_time.tv_sec == phba->cmf_latency.tv_sec) { |
5926 | msec = (cmpl_time.tv_nsec - phba->cmf_latency.tv_nsec) / |
5927 | NSEC_PER_MSEC; |
5928 | } else { |
5929 | if (cmpl_time.tv_nsec >= phba->cmf_latency.tv_nsec) { |
5930 | msec = (cmpl_time.tv_sec - |
5931 | phba->cmf_latency.tv_sec) * MSEC_PER_SEC; |
5932 | msec += ((cmpl_time.tv_nsec - |
5933 | phba->cmf_latency.tv_nsec) / NSEC_PER_MSEC); |
5934 | } else { |
5935 | msec = (cmpl_time.tv_sec - phba->cmf_latency.tv_sec - |
5936 | 1) * MSEC_PER_SEC; |
5937 | msec += (((NSEC_PER_SEC - phba->cmf_latency.tv_nsec) + |
5938 | cmpl_time.tv_nsec) / NSEC_PER_MSEC); |
5939 | } |
5940 | } |
5941 | return msec; |
5942 | } |
5943 | |
5944 | /** |
5945 | * lpfc_cmf_timer - This is the timer function for one congestion |
5946 | * rate interval. |
5947 | * @timer: Pointer to the high resolution timer that expired |
5948 | */ |
5949 | static enum hrtimer_restart |
5950 | lpfc_cmf_timer(struct hrtimer *timer) |
5951 | { |
5952 | struct lpfc_hba *phba = container_of(timer, struct lpfc_hba, |
5953 | cmf_timer); |
5954 | struct rx_info_entry entry; |
5955 | uint32_t io_cnt; |
5956 | uint32_t busy, max_read; |
5957 | uint64_t total, rcv, lat, mbpi, , cnt; |
5958 | int timer_interval = LPFC_CMF_INTERVAL; |
5959 | uint32_t ms; |
5960 | struct lpfc_cgn_stat *cgs; |
5961 | int cpu; |
5962 | |
5963 | /* Only restart the timer if congestion mgmt is on */ |
5964 | if (phba->cmf_active_mode == LPFC_CFG_OFF || |
5965 | !phba->cmf_latency.tv_sec) { |
5966 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
5967 | "6224 CMF timer exit: %d %lld\n" , |
5968 | phba->cmf_active_mode, |
5969 | (uint64_t)phba->cmf_latency.tv_sec); |
5970 | return HRTIMER_NORESTART; |
5971 | } |
5972 | |
5973 | /* If pport is not ready yet, just exit and wait for |
5974 | * the next timer cycle to hit. |
5975 | */ |
5976 | if (!phba->pport) |
5977 | goto skip; |
5978 | |
5979 | /* Do not block SCSI IO while in the timer routine since |
5980 | * total_bytes will be cleared |
5981 | */ |
5982 | atomic_set(v: &phba->cmf_stop_io, i: 1); |
5983 | |
5984 | /* First we need to calculate the actual ms between |
5985 | * the last timer interrupt and this one. We ask for |
5986 | * LPFC_CMF_INTERVAL, however the actual time may |
5987 | * vary depending on system overhead. |
5988 | */ |
5989 | ms = lpfc_calc_cmf_latency(phba); |
5990 | |
5991 | |
5992 | /* Immediately after we calculate the time since the last |
5993 | * timer interrupt, set the start time for the next |
5994 | * interrupt |
5995 | */ |
5996 | ktime_get_real_ts64(tv: &phba->cmf_latency); |
5997 | |
5998 | phba->cmf_link_byte_count = |
5999 | div_u64(dividend: phba->cmf_max_line_rate * LPFC_CMF_INTERVAL, divisor: 1000); |
6000 | |
6001 | /* Collect all the stats from the prior timer interval */ |
6002 | total = 0; |
6003 | io_cnt = 0; |
6004 | lat = 0; |
6005 | rcv = 0; |
6006 | for_each_present_cpu(cpu) { |
6007 | cgs = per_cpu_ptr(phba->cmf_stat, cpu); |
6008 | total += atomic64_xchg(v: &cgs->total_bytes, new: 0); |
6009 | io_cnt += atomic_xchg(v: &cgs->rx_io_cnt, new: 0); |
6010 | lat += atomic64_xchg(v: &cgs->rx_latency, new: 0); |
6011 | rcv += atomic64_xchg(v: &cgs->rcv_bytes, new: 0); |
6012 | } |
6013 | |
6014 | /* Before we issue another CMF_SYNC_WQE, retrieve the BW |
6015 | * returned from the last CMF_SYNC_WQE issued, from |
6016 | * cmf_last_sync_bw. This will be the target BW for |
6017 | * this next timer interval. |
6018 | */ |
6019 | if (phba->cmf_active_mode == LPFC_CFG_MANAGED && |
6020 | phba->link_state != LPFC_LINK_DOWN && |
6021 | phba->hba_flag & HBA_SETUP) { |
6022 | mbpi = phba->cmf_last_sync_bw; |
6023 | phba->cmf_last_sync_bw = 0; |
6024 | extra = 0; |
6025 | |
6026 | /* Calculate any extra bytes needed to account for the |
6027 | * timer accuracy. If we are less than LPFC_CMF_INTERVAL |
6028 | * calculate the adjustment needed for total to reflect |
6029 | * a full LPFC_CMF_INTERVAL. |
6030 | */ |
6031 | if (ms && ms < LPFC_CMF_INTERVAL) { |
6032 | cnt = div_u64(dividend: total, divisor: ms); /* bytes per ms */ |
6033 | cnt *= LPFC_CMF_INTERVAL; /* what total should be */ |
6034 | extra = cnt - total; |
6035 | } |
6036 | lpfc_issue_cmf_sync_wqe(phba, LPFC_CMF_INTERVAL, total: total + extra); |
6037 | } else { |
6038 | /* For Monitor mode or link down we want mbpi |
6039 | * to be the full link speed |
6040 | */ |
6041 | mbpi = phba->cmf_link_byte_count; |
6042 | extra = 0; |
6043 | } |
6044 | phba->cmf_timer_cnt++; |
6045 | |
6046 | if (io_cnt) { |
6047 | /* Update congestion info buffer latency in us */ |
6048 | atomic_add(i: io_cnt, v: &phba->cgn_latency_evt_cnt); |
6049 | atomic64_add(i: lat, v: &phba->cgn_latency_evt); |
6050 | } |
6051 | busy = atomic_xchg(v: &phba->cmf_busy, new: 0); |
6052 | max_read = atomic_xchg(v: &phba->rx_max_read_cnt, new: 0); |
6053 | |
6054 | /* Calculate MBPI for the next timer interval */ |
6055 | if (mbpi) { |
6056 | if (mbpi > phba->cmf_link_byte_count || |
6057 | phba->cmf_active_mode == LPFC_CFG_MONITOR) |
6058 | mbpi = phba->cmf_link_byte_count; |
6059 | |
6060 | /* Change max_bytes_per_interval to what the prior |
6061 | * CMF_SYNC_WQE cmpl indicated. |
6062 | */ |
6063 | if (mbpi != phba->cmf_max_bytes_per_interval) |
6064 | phba->cmf_max_bytes_per_interval = mbpi; |
6065 | } |
6066 | |
6067 | /* Save rxmonitor information for debug */ |
6068 | if (phba->rx_monitor) { |
6069 | entry.total_bytes = total; |
6070 | entry.cmf_bytes = total + extra; |
6071 | entry.rcv_bytes = rcv; |
6072 | entry.cmf_busy = busy; |
6073 | entry.cmf_info = phba->cmf_active_info; |
6074 | if (io_cnt) { |
6075 | entry.avg_io_latency = div_u64(dividend: lat, divisor: io_cnt); |
6076 | entry.avg_io_size = div_u64(dividend: rcv, divisor: io_cnt); |
6077 | } else { |
6078 | entry.avg_io_latency = 0; |
6079 | entry.avg_io_size = 0; |
6080 | } |
6081 | entry.max_read_cnt = max_read; |
6082 | entry.io_cnt = io_cnt; |
6083 | entry.max_bytes_per_interval = mbpi; |
6084 | if (phba->cmf_active_mode == LPFC_CFG_MANAGED) |
6085 | entry.timer_utilization = phba->cmf_last_ts; |
6086 | else |
6087 | entry.timer_utilization = ms; |
6088 | entry.timer_interval = ms; |
6089 | phba->cmf_last_ts = 0; |
6090 | |
6091 | lpfc_rx_monitor_record(rx_monitor: phba->rx_monitor, entry: &entry); |
6092 | } |
6093 | |
6094 | if (phba->cmf_active_mode == LPFC_CFG_MONITOR) { |
6095 | /* If Monitor mode, check if we are oversubscribed |
6096 | * against the full line rate. |
6097 | */ |
6098 | if (mbpi && total > mbpi) |
6099 | atomic_inc(v: &phba->cgn_driver_evt_cnt); |
6100 | } |
6101 | phba->rx_block_cnt += div_u64(dividend: rcv, divisor: 512); /* save 512 byte block cnt */ |
6102 | |
6103 | /* Since total_bytes has already been zero'ed, its okay to unblock |
6104 | * after max_bytes_per_interval is setup. |
6105 | */ |
6106 | if (atomic_xchg(v: &phba->cmf_bw_wait, new: 0)) |
6107 | queue_work(wq: phba->wq, work: &phba->unblock_request_work); |
6108 | |
6109 | /* SCSI IO is now unblocked */ |
6110 | atomic_set(v: &phba->cmf_stop_io, i: 0); |
6111 | |
6112 | skip: |
6113 | hrtimer_forward_now(timer, |
6114 | interval: ktime_set(secs: 0, nsecs: timer_interval * NSEC_PER_MSEC)); |
6115 | return HRTIMER_RESTART; |
6116 | } |
6117 | |
6118 | #define trunk_link_status(__idx)\ |
6119 | bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\ |
6120 | ((phba->trunk_link.link##__idx.state == LPFC_LINK_UP) ?\ |
6121 | "Link up" : "Link down") : "NA" |
6122 | /* Did port __idx reported an error */ |
6123 | #define trunk_port_fault(__idx)\ |
6124 | bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\ |
6125 | (port_fault & (1 << __idx) ? "YES" : "NO") : "NA" |
6126 | |
6127 | static void |
6128 | lpfc_update_trunk_link_status(struct lpfc_hba *phba, |
6129 | struct lpfc_acqe_fc_la *acqe_fc) |
6130 | { |
6131 | uint8_t port_fault = bf_get(lpfc_acqe_fc_la_trunk_linkmask, acqe_fc); |
6132 | uint8_t err = bf_get(lpfc_acqe_fc_la_trunk_fault, acqe_fc); |
6133 | u8 cnt = 0; |
6134 | |
6135 | phba->sli4_hba.link_state.speed = |
6136 | lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC, |
6137 | bf_get(lpfc_acqe_fc_la_speed, acqe_fc)); |
6138 | |
6139 | phba->sli4_hba.link_state.logical_speed = |
6140 | bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10; |
6141 | /* We got FC link speed, convert to fc_linkspeed (READ_TOPOLOGY) */ |
6142 | phba->fc_linkspeed = |
6143 | lpfc_async_link_speed_to_read_top( |
6144 | phba, |
6145 | bf_get(lpfc_acqe_fc_la_speed, acqe_fc)); |
6146 | |
6147 | if (bf_get(lpfc_acqe_fc_la_trunk_config_port0, acqe_fc)) { |
6148 | phba->trunk_link.link0.state = |
6149 | bf_get(lpfc_acqe_fc_la_trunk_link_status_port0, acqe_fc) |
6150 | ? LPFC_LINK_UP : LPFC_LINK_DOWN; |
6151 | phba->trunk_link.link0.fault = port_fault & 0x1 ? err : 0; |
6152 | cnt++; |
6153 | } |
6154 | if (bf_get(lpfc_acqe_fc_la_trunk_config_port1, acqe_fc)) { |
6155 | phba->trunk_link.link1.state = |
6156 | bf_get(lpfc_acqe_fc_la_trunk_link_status_port1, acqe_fc) |
6157 | ? LPFC_LINK_UP : LPFC_LINK_DOWN; |
6158 | phba->trunk_link.link1.fault = port_fault & 0x2 ? err : 0; |
6159 | cnt++; |
6160 | } |
6161 | if (bf_get(lpfc_acqe_fc_la_trunk_config_port2, acqe_fc)) { |
6162 | phba->trunk_link.link2.state = |
6163 | bf_get(lpfc_acqe_fc_la_trunk_link_status_port2, acqe_fc) |
6164 | ? LPFC_LINK_UP : LPFC_LINK_DOWN; |
6165 | phba->trunk_link.link2.fault = port_fault & 0x4 ? err : 0; |
6166 | cnt++; |
6167 | } |
6168 | if (bf_get(lpfc_acqe_fc_la_trunk_config_port3, acqe_fc)) { |
6169 | phba->trunk_link.link3.state = |
6170 | bf_get(lpfc_acqe_fc_la_trunk_link_status_port3, acqe_fc) |
6171 | ? LPFC_LINK_UP : LPFC_LINK_DOWN; |
6172 | phba->trunk_link.link3.fault = port_fault & 0x8 ? err : 0; |
6173 | cnt++; |
6174 | } |
6175 | |
6176 | if (cnt) |
6177 | phba->trunk_link.phy_lnk_speed = |
6178 | phba->sli4_hba.link_state.logical_speed / (cnt * 1000); |
6179 | else |
6180 | phba->trunk_link.phy_lnk_speed = LPFC_LINK_SPEED_UNKNOWN; |
6181 | |
6182 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6183 | "2910 Async FC Trunking Event - Speed:%d\n" |
6184 | "\tLogical speed:%d " |
6185 | "port0: %s port1: %s port2: %s port3: %s\n" , |
6186 | phba->sli4_hba.link_state.speed, |
6187 | phba->sli4_hba.link_state.logical_speed, |
6188 | trunk_link_status(0), trunk_link_status(1), |
6189 | trunk_link_status(2), trunk_link_status(3)); |
6190 | |
6191 | if (phba->cmf_active_mode != LPFC_CFG_OFF) |
6192 | lpfc_cmf_signal_init(phba); |
6193 | |
6194 | if (port_fault) |
6195 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6196 | "3202 trunk error:0x%x (%s) seen on port0:%s " |
6197 | /* |
6198 | * SLI-4: We have only 0xA error codes |
6199 | * defined as of now. print an appropriate |
6200 | * message in case driver needs to be updated. |
6201 | */ |
6202 | "port1:%s port2:%s port3:%s\n" , err, err > 0xA ? |
6203 | "UNDEFINED. update driver." : trunk_errmsg[err], |
6204 | trunk_port_fault(0), trunk_port_fault(1), |
6205 | trunk_port_fault(2), trunk_port_fault(3)); |
6206 | } |
6207 | |
6208 | |
6209 | /** |
6210 | * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event |
6211 | * @phba: pointer to lpfc hba data structure. |
6212 | * @acqe_fc: pointer to the async fc completion queue entry. |
6213 | * |
6214 | * This routine is to handle the SLI4 asynchronous FC event. It will simply log |
6215 | * that the event was received and then issue a read_topology mailbox command so |
6216 | * that the rest of the driver will treat it the same as SLI3. |
6217 | **/ |
6218 | static void |
6219 | lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc) |
6220 | { |
6221 | LPFC_MBOXQ_t *pmb; |
6222 | MAILBOX_t *mb; |
6223 | struct lpfc_mbx_read_top *la; |
6224 | char *log_level; |
6225 | int rc; |
6226 | |
6227 | if (bf_get(lpfc_trailer_type, acqe_fc) != |
6228 | LPFC_FC_LA_EVENT_TYPE_FC_LINK) { |
6229 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6230 | "2895 Non FC link Event detected.(%d)\n" , |
6231 | bf_get(lpfc_trailer_type, acqe_fc)); |
6232 | return; |
6233 | } |
6234 | |
6235 | if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) == |
6236 | LPFC_FC_LA_TYPE_TRUNKING_EVENT) { |
6237 | lpfc_update_trunk_link_status(phba, acqe_fc); |
6238 | return; |
6239 | } |
6240 | |
6241 | /* Keep the link status for extra SLI4 state machine reference */ |
6242 | phba->sli4_hba.link_state.speed = |
6243 | lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC, |
6244 | bf_get(lpfc_acqe_fc_la_speed, acqe_fc)); |
6245 | phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL; |
6246 | phba->sli4_hba.link_state.topology = |
6247 | bf_get(lpfc_acqe_fc_la_topology, acqe_fc); |
6248 | phba->sli4_hba.link_state.status = |
6249 | bf_get(lpfc_acqe_fc_la_att_type, acqe_fc); |
6250 | phba->sli4_hba.link_state.type = |
6251 | bf_get(lpfc_acqe_fc_la_port_type, acqe_fc); |
6252 | phba->sli4_hba.link_state.number = |
6253 | bf_get(lpfc_acqe_fc_la_port_number, acqe_fc); |
6254 | phba->sli4_hba.link_state.fault = |
6255 | bf_get(lpfc_acqe_link_fault, acqe_fc); |
6256 | phba->sli4_hba.link_state.link_status = |
6257 | bf_get(lpfc_acqe_fc_la_link_status, acqe_fc); |
6258 | |
6259 | /* |
6260 | * Only select attention types need logical speed modification to what |
6261 | * was previously set. |
6262 | */ |
6263 | if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_LINK_UP && |
6264 | phba->sli4_hba.link_state.status < LPFC_FC_LA_TYPE_ACTIVATE_FAIL) { |
6265 | if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) == |
6266 | LPFC_FC_LA_TYPE_LINK_DOWN) |
6267 | phba->sli4_hba.link_state.logical_speed = 0; |
6268 | else if (!phba->sli4_hba.conf_trunk) |
6269 | phba->sli4_hba.link_state.logical_speed = |
6270 | bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc) * 10; |
6271 | } |
6272 | |
6273 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
6274 | "2896 Async FC event - Speed:%dGBaud Topology:x%x " |
6275 | "LA Type:x%x Port Type:%d Port Number:%d Logical speed:" |
6276 | "%dMbps Fault:x%x Link Status:x%x\n" , |
6277 | phba->sli4_hba.link_state.speed, |
6278 | phba->sli4_hba.link_state.topology, |
6279 | phba->sli4_hba.link_state.status, |
6280 | phba->sli4_hba.link_state.type, |
6281 | phba->sli4_hba.link_state.number, |
6282 | phba->sli4_hba.link_state.logical_speed, |
6283 | phba->sli4_hba.link_state.fault, |
6284 | phba->sli4_hba.link_state.link_status); |
6285 | |
6286 | /* |
6287 | * The following attention types are informational only, providing |
6288 | * further details about link status. Overwrite the value of |
6289 | * link_state.status appropriately. No further action is required. |
6290 | */ |
6291 | if (phba->sli4_hba.link_state.status >= LPFC_FC_LA_TYPE_ACTIVATE_FAIL) { |
6292 | switch (phba->sli4_hba.link_state.status) { |
6293 | case LPFC_FC_LA_TYPE_ACTIVATE_FAIL: |
6294 | log_level = KERN_WARNING; |
6295 | phba->sli4_hba.link_state.status = |
6296 | LPFC_FC_LA_TYPE_LINK_DOWN; |
6297 | break; |
6298 | case LPFC_FC_LA_TYPE_LINK_RESET_PRTCL_EVT: |
6299 | /* |
6300 | * During bb credit recovery establishment, receiving |
6301 | * this attention type is normal. Link Up attention |
6302 | * type is expected to occur before this informational |
6303 | * attention type so keep the Link Up status. |
6304 | */ |
6305 | log_level = KERN_INFO; |
6306 | phba->sli4_hba.link_state.status = |
6307 | LPFC_FC_LA_TYPE_LINK_UP; |
6308 | break; |
6309 | default: |
6310 | log_level = KERN_INFO; |
6311 | break; |
6312 | } |
6313 | lpfc_log_msg(phba, log_level, LOG_SLI, |
6314 | "2992 Async FC event - Informational Link " |
6315 | "Attention Type x%x\n" , |
6316 | bf_get(lpfc_acqe_fc_la_att_type, acqe_fc)); |
6317 | return; |
6318 | } |
6319 | |
6320 | pmb = (LPFC_MBOXQ_t *)mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
6321 | if (!pmb) { |
6322 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6323 | "2897 The mboxq allocation failed\n" ); |
6324 | return; |
6325 | } |
6326 | rc = lpfc_mbox_rsrc_prep(phba, mbox: pmb); |
6327 | if (rc) { |
6328 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6329 | "2898 The mboxq prep failed\n" ); |
6330 | goto out_free_pmb; |
6331 | } |
6332 | |
6333 | /* Cleanup any outstanding ELS commands */ |
6334 | lpfc_els_flush_all_cmd(phba); |
6335 | |
6336 | /* Block ELS IOCBs until we have done process link event */ |
6337 | phba->sli4_hba.els_wq->pring->flag |= LPFC_STOP_IOCB_EVENT; |
6338 | |
6339 | /* Update link event statistics */ |
6340 | phba->sli.slistat.link_event++; |
6341 | |
6342 | /* Create lpfc_handle_latt mailbox command from link ACQE */ |
6343 | lpfc_read_topology(phba, pmb, (struct lpfc_dmabuf *)pmb->ctx_buf); |
6344 | pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology; |
6345 | pmb->vport = phba->pport; |
6346 | |
6347 | if (phba->sli4_hba.link_state.status != LPFC_FC_LA_TYPE_LINK_UP) { |
6348 | phba->link_flag &= ~(LS_MDS_LINK_DOWN | LS_MDS_LOOPBACK); |
6349 | |
6350 | switch (phba->sli4_hba.link_state.status) { |
6351 | case LPFC_FC_LA_TYPE_MDS_LINK_DOWN: |
6352 | phba->link_flag |= LS_MDS_LINK_DOWN; |
6353 | break; |
6354 | case LPFC_FC_LA_TYPE_MDS_LOOPBACK: |
6355 | phba->link_flag |= LS_MDS_LOOPBACK; |
6356 | break; |
6357 | default: |
6358 | break; |
6359 | } |
6360 | |
6361 | /* Initialize completion status */ |
6362 | mb = &pmb->u.mb; |
6363 | mb->mbxStatus = MBX_SUCCESS; |
6364 | |
6365 | /* Parse port fault information field */ |
6366 | lpfc_sli4_parse_latt_fault(phba, acqe_link: (void *)acqe_fc); |
6367 | |
6368 | /* Parse and translate link attention fields */ |
6369 | la = (struct lpfc_mbx_read_top *)&pmb->u.mb.un.varReadTop; |
6370 | la->eventTag = acqe_fc->event_tag; |
6371 | |
6372 | if (phba->sli4_hba.link_state.status == |
6373 | LPFC_FC_LA_TYPE_UNEXP_WWPN) { |
6374 | bf_set(lpfc_mbx_read_top_att_type, la, |
6375 | LPFC_FC_LA_TYPE_UNEXP_WWPN); |
6376 | } else { |
6377 | bf_set(lpfc_mbx_read_top_att_type, la, |
6378 | LPFC_FC_LA_TYPE_LINK_DOWN); |
6379 | } |
6380 | /* Invoke the mailbox command callback function */ |
6381 | lpfc_mbx_cmpl_read_topology(phba, pmb); |
6382 | |
6383 | return; |
6384 | } |
6385 | |
6386 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); |
6387 | if (rc == MBX_NOT_FINISHED) |
6388 | goto out_free_pmb; |
6389 | return; |
6390 | |
6391 | out_free_pmb: |
6392 | lpfc_mbox_rsrc_cleanup(phba, mbox: pmb, locked: MBOX_THD_UNLOCKED); |
6393 | } |
6394 | |
6395 | /** |
6396 | * lpfc_sli4_async_sli_evt - Process the asynchronous SLI link event |
6397 | * @phba: pointer to lpfc hba data structure. |
6398 | * @acqe_sli: pointer to the async SLI completion queue entry. |
6399 | * |
6400 | * This routine is to handle the SLI4 asynchronous SLI events. |
6401 | **/ |
6402 | static void |
6403 | lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli) |
6404 | { |
6405 | char port_name; |
6406 | char message[128]; |
6407 | uint8_t status; |
6408 | uint8_t evt_type; |
6409 | uint8_t operational = 0; |
6410 | struct temp_event temp_event_data; |
6411 | struct lpfc_acqe_misconfigured_event *misconfigured; |
6412 | struct lpfc_acqe_cgn_signal *cgn_signal; |
6413 | struct Scsi_Host *shost; |
6414 | struct lpfc_vport **vports; |
6415 | int rc, i, cnt; |
6416 | |
6417 | evt_type = bf_get(lpfc_trailer_type, acqe_sli); |
6418 | |
6419 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
6420 | "2901 Async SLI event - Type:%d, Event Data: x%08x " |
6421 | "x%08x x%08x x%08x\n" , evt_type, |
6422 | acqe_sli->event_data1, acqe_sli->event_data2, |
6423 | acqe_sli->event_data3, acqe_sli->trailer); |
6424 | |
6425 | port_name = phba->Port[0]; |
6426 | if (port_name == 0x00) |
6427 | port_name = '?'; /* get port name is empty */ |
6428 | |
6429 | switch (evt_type) { |
6430 | case LPFC_SLI_EVENT_TYPE_OVER_TEMP: |
6431 | temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; |
6432 | temp_event_data.event_code = LPFC_THRESHOLD_TEMP; |
6433 | temp_event_data.data = (uint32_t)acqe_sli->event_data1; |
6434 | |
6435 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
6436 | "3190 Over Temperature:%d Celsius- Port Name %c\n" , |
6437 | acqe_sli->event_data1, port_name); |
6438 | |
6439 | phba->sfp_warning |= LPFC_TRANSGRESSION_HIGH_TEMPERATURE; |
6440 | shost = lpfc_shost_from_vport(vport: phba->pport); |
6441 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
6442 | data_len: sizeof(temp_event_data), |
6443 | data_buf: (char *)&temp_event_data, |
6444 | SCSI_NL_VID_TYPE_PCI |
6445 | | PCI_VENDOR_ID_EMULEX); |
6446 | break; |
6447 | case LPFC_SLI_EVENT_TYPE_NORM_TEMP: |
6448 | temp_event_data.event_type = FC_REG_TEMPERATURE_EVENT; |
6449 | temp_event_data.event_code = LPFC_NORMAL_TEMP; |
6450 | temp_event_data.data = (uint32_t)acqe_sli->event_data1; |
6451 | |
6452 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI | LOG_LDS_EVENT, |
6453 | "3191 Normal Temperature:%d Celsius - Port Name %c\n" , |
6454 | acqe_sli->event_data1, port_name); |
6455 | |
6456 | shost = lpfc_shost_from_vport(vport: phba->pport); |
6457 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
6458 | data_len: sizeof(temp_event_data), |
6459 | data_buf: (char *)&temp_event_data, |
6460 | SCSI_NL_VID_TYPE_PCI |
6461 | | PCI_VENDOR_ID_EMULEX); |
6462 | break; |
6463 | case LPFC_SLI_EVENT_TYPE_MISCONFIGURED: |
6464 | misconfigured = (struct lpfc_acqe_misconfigured_event *) |
6465 | &acqe_sli->event_data1; |
6466 | |
6467 | /* fetch the status for this port */ |
6468 | switch (phba->sli4_hba.lnk_info.lnk_no) { |
6469 | case LPFC_LINK_NUMBER_0: |
6470 | status = bf_get(lpfc_sli_misconfigured_port0_state, |
6471 | &misconfigured->theEvent); |
6472 | operational = bf_get(lpfc_sli_misconfigured_port0_op, |
6473 | &misconfigured->theEvent); |
6474 | break; |
6475 | case LPFC_LINK_NUMBER_1: |
6476 | status = bf_get(lpfc_sli_misconfigured_port1_state, |
6477 | &misconfigured->theEvent); |
6478 | operational = bf_get(lpfc_sli_misconfigured_port1_op, |
6479 | &misconfigured->theEvent); |
6480 | break; |
6481 | case LPFC_LINK_NUMBER_2: |
6482 | status = bf_get(lpfc_sli_misconfigured_port2_state, |
6483 | &misconfigured->theEvent); |
6484 | operational = bf_get(lpfc_sli_misconfigured_port2_op, |
6485 | &misconfigured->theEvent); |
6486 | break; |
6487 | case LPFC_LINK_NUMBER_3: |
6488 | status = bf_get(lpfc_sli_misconfigured_port3_state, |
6489 | &misconfigured->theEvent); |
6490 | operational = bf_get(lpfc_sli_misconfigured_port3_op, |
6491 | &misconfigured->theEvent); |
6492 | break; |
6493 | default: |
6494 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6495 | "3296 " |
6496 | "LPFC_SLI_EVENT_TYPE_MISCONFIGURED " |
6497 | "event: Invalid link %d" , |
6498 | phba->sli4_hba.lnk_info.lnk_no); |
6499 | return; |
6500 | } |
6501 | |
6502 | /* Skip if optic state unchanged */ |
6503 | if (phba->sli4_hba.lnk_info.optic_state == status) |
6504 | return; |
6505 | |
6506 | switch (status) { |
6507 | case LPFC_SLI_EVENT_STATUS_VALID: |
6508 | sprintf(buf: message, fmt: "Physical Link is functional" ); |
6509 | break; |
6510 | case LPFC_SLI_EVENT_STATUS_NOT_PRESENT: |
6511 | sprintf(buf: message, fmt: "Optics faulted/incorrectly " |
6512 | "installed/not installed - Reseat optics, " |
6513 | "if issue not resolved, replace." ); |
6514 | break; |
6515 | case LPFC_SLI_EVENT_STATUS_WRONG_TYPE: |
6516 | sprintf(buf: message, |
6517 | fmt: "Optics of two types installed - Remove one " |
6518 | "optic or install matching pair of optics." ); |
6519 | break; |
6520 | case LPFC_SLI_EVENT_STATUS_UNSUPPORTED: |
6521 | sprintf(buf: message, fmt: "Incompatible optics - Replace with " |
6522 | "compatible optics for card to function." ); |
6523 | break; |
6524 | case LPFC_SLI_EVENT_STATUS_UNQUALIFIED: |
6525 | sprintf(buf: message, fmt: "Unqualified optics - Replace with " |
6526 | "Avago optics for Warranty and Technical " |
6527 | "Support - Link is%s operational" , |
6528 | (operational) ? " not" : "" ); |
6529 | break; |
6530 | case LPFC_SLI_EVENT_STATUS_UNCERTIFIED: |
6531 | sprintf(buf: message, fmt: "Uncertified optics - Replace with " |
6532 | "Avago-certified optics to enable link " |
6533 | "operation - Link is%s operational" , |
6534 | (operational) ? " not" : "" ); |
6535 | break; |
6536 | default: |
6537 | /* firmware is reporting a status we don't know about */ |
6538 | sprintf(buf: message, fmt: "Unknown event status x%02x" , status); |
6539 | break; |
6540 | } |
6541 | |
6542 | /* Issue READ_CONFIG mbox command to refresh supported speeds */ |
6543 | rc = lpfc_sli4_read_config(phba); |
6544 | if (rc) { |
6545 | phba->lmt = 0; |
6546 | lpfc_printf_log(phba, KERN_ERR, |
6547 | LOG_TRACE_EVENT, |
6548 | "3194 Unable to retrieve supported " |
6549 | "speeds, rc = 0x%x\n" , rc); |
6550 | } |
6551 | rc = lpfc_sli4_refresh_params(phba); |
6552 | if (rc) { |
6553 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
6554 | "3174 Unable to update pls support, " |
6555 | "rc x%x\n" , rc); |
6556 | } |
6557 | vports = lpfc_create_vport_work_array(phba); |
6558 | if (vports != NULL) { |
6559 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; |
6560 | i++) { |
6561 | shost = lpfc_shost_from_vport(vport: vports[i]); |
6562 | lpfc_host_supported_speeds_set(shost); |
6563 | } |
6564 | } |
6565 | lpfc_destroy_vport_work_array(phba, vports); |
6566 | |
6567 | phba->sli4_hba.lnk_info.optic_state = status; |
6568 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
6569 | "3176 Port Name %c %s\n" , port_name, message); |
6570 | break; |
6571 | case LPFC_SLI_EVENT_TYPE_REMOTE_DPORT: |
6572 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
6573 | "3192 Remote DPort Test Initiated - " |
6574 | "Event Data1:x%08x Event Data2: x%08x\n" , |
6575 | acqe_sli->event_data1, acqe_sli->event_data2); |
6576 | break; |
6577 | case LPFC_SLI_EVENT_TYPE_PORT_PARAMS_CHG: |
6578 | /* Call FW to obtain active parms */ |
6579 | lpfc_sli4_cgn_parm_chg_evt(phba); |
6580 | break; |
6581 | case LPFC_SLI_EVENT_TYPE_MISCONF_FAWWN: |
6582 | /* Misconfigured WWN. Reports that the SLI Port is configured |
6583 | * to use FA-WWN, but the attached device doesn’t support it. |
6584 | * Event Data1 - N.A, Event Data2 - N.A |
6585 | * This event only happens on the physical port. |
6586 | */ |
6587 | lpfc_log_msg(phba, KERN_WARNING, LOG_SLI | LOG_DISCOVERY, |
6588 | "2699 Misconfigured FA-PWWN - Attached device " |
6589 | "does not support FA-PWWN\n" ); |
6590 | phba->sli4_hba.fawwpn_flag &= ~LPFC_FAWWPN_FABRIC; |
6591 | memset(phba->pport->fc_portname.u.wwn, 0, |
6592 | sizeof(struct lpfc_name)); |
6593 | break; |
6594 | case LPFC_SLI_EVENT_TYPE_EEPROM_FAILURE: |
6595 | /* EEPROM failure. No driver action is required */ |
6596 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
6597 | "2518 EEPROM failure - " |
6598 | "Event Data1: x%08x Event Data2: x%08x\n" , |
6599 | acqe_sli->event_data1, acqe_sli->event_data2); |
6600 | break; |
6601 | case LPFC_SLI_EVENT_TYPE_CGN_SIGNAL: |
6602 | if (phba->cmf_active_mode == LPFC_CFG_OFF) |
6603 | break; |
6604 | cgn_signal = (struct lpfc_acqe_cgn_signal *) |
6605 | &acqe_sli->event_data1; |
6606 | phba->cgn_acqe_cnt++; |
6607 | |
6608 | cnt = bf_get(lpfc_warn_acqe, cgn_signal); |
6609 | atomic64_add(i: cnt, v: &phba->cgn_acqe_stat.warn); |
6610 | atomic64_add(i: cgn_signal->alarm_cnt, v: &phba->cgn_acqe_stat.alarm); |
6611 | |
6612 | /* no threshold for CMF, even 1 signal will trigger an event */ |
6613 | |
6614 | /* Alarm overrides warning, so check that first */ |
6615 | if (cgn_signal->alarm_cnt) { |
6616 | if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { |
6617 | /* Keep track of alarm cnt for CMF_SYNC_WQE */ |
6618 | atomic_add(i: cgn_signal->alarm_cnt, |
6619 | v: &phba->cgn_sync_alarm_cnt); |
6620 | } |
6621 | } else if (cnt) { |
6622 | /* signal action needs to be taken */ |
6623 | if (phba->cgn_reg_signal == EDC_CG_SIG_WARN_ONLY || |
6624 | phba->cgn_reg_signal == EDC_CG_SIG_WARN_ALARM) { |
6625 | /* Keep track of warning cnt for CMF_SYNC_WQE */ |
6626 | atomic_add(i: cnt, v: &phba->cgn_sync_warn_cnt); |
6627 | } |
6628 | } |
6629 | break; |
6630 | case LPFC_SLI_EVENT_TYPE_RD_SIGNAL: |
6631 | /* May be accompanied by a temperature event */ |
6632 | lpfc_printf_log(phba, KERN_INFO, |
6633 | LOG_SLI | LOG_LINK_EVENT | LOG_LDS_EVENT, |
6634 | "2902 Remote Degrade Signaling: x%08x x%08x " |
6635 | "x%08x\n" , |
6636 | acqe_sli->event_data1, acqe_sli->event_data2, |
6637 | acqe_sli->event_data3); |
6638 | break; |
6639 | default: |
6640 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
6641 | "3193 Unrecognized SLI event, type: 0x%x" , |
6642 | evt_type); |
6643 | break; |
6644 | } |
6645 | } |
6646 | |
6647 | /** |
6648 | * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport |
6649 | * @vport: pointer to vport data structure. |
6650 | * |
6651 | * This routine is to perform Clear Virtual Link (CVL) on a vport in |
6652 | * response to a CVL event. |
6653 | * |
6654 | * Return the pointer to the ndlp with the vport if successful, otherwise |
6655 | * return NULL. |
6656 | **/ |
6657 | static struct lpfc_nodelist * |
6658 | lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport) |
6659 | { |
6660 | struct lpfc_nodelist *ndlp; |
6661 | struct Scsi_Host *shost; |
6662 | struct lpfc_hba *phba; |
6663 | |
6664 | if (!vport) |
6665 | return NULL; |
6666 | phba = vport->phba; |
6667 | if (!phba) |
6668 | return NULL; |
6669 | ndlp = lpfc_findnode_did(vport, Fabric_DID); |
6670 | if (!ndlp) { |
6671 | /* Cannot find existing Fabric ndlp, so allocate a new one */ |
6672 | ndlp = lpfc_nlp_init(vport, Fabric_DID); |
6673 | if (!ndlp) |
6674 | return NULL; |
6675 | /* Set the node type */ |
6676 | ndlp->nlp_type |= NLP_FABRIC; |
6677 | /* Put ndlp onto node list */ |
6678 | lpfc_enqueue_node(vport, ndlp); |
6679 | } |
6680 | if ((phba->pport->port_state < LPFC_FLOGI) && |
6681 | (phba->pport->port_state != LPFC_VPORT_FAILED)) |
6682 | return NULL; |
6683 | /* If virtual link is not yet instantiated ignore CVL */ |
6684 | if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC) |
6685 | && (vport->port_state != LPFC_VPORT_FAILED)) |
6686 | return NULL; |
6687 | shost = lpfc_shost_from_vport(vport); |
6688 | if (!shost) |
6689 | return NULL; |
6690 | lpfc_linkdown_port(vport); |
6691 | lpfc_cleanup_pending_mbox(vport); |
6692 | spin_lock_irq(lock: shost->host_lock); |
6693 | vport->fc_flag |= FC_VPORT_CVL_RCVD; |
6694 | spin_unlock_irq(lock: shost->host_lock); |
6695 | |
6696 | return ndlp; |
6697 | } |
6698 | |
6699 | /** |
6700 | * lpfc_sli4_perform_all_vport_cvl - Perform clear virtual link on all vports |
6701 | * @phba: pointer to lpfc hba data structure. |
6702 | * |
6703 | * This routine is to perform Clear Virtual Link (CVL) on all vports in |
6704 | * response to a FCF dead event. |
6705 | **/ |
6706 | static void |
6707 | lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba *phba) |
6708 | { |
6709 | struct lpfc_vport **vports; |
6710 | int i; |
6711 | |
6712 | vports = lpfc_create_vport_work_array(phba); |
6713 | if (vports) |
6714 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) |
6715 | lpfc_sli4_perform_vport_cvl(vport: vports[i]); |
6716 | lpfc_destroy_vport_work_array(phba, vports); |
6717 | } |
6718 | |
6719 | /** |
6720 | * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event |
6721 | * @phba: pointer to lpfc hba data structure. |
6722 | * @acqe_fip: pointer to the async fcoe completion queue entry. |
6723 | * |
6724 | * This routine is to handle the SLI4 asynchronous fcoe event. |
6725 | **/ |
6726 | static void |
6727 | lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, |
6728 | struct lpfc_acqe_fip *acqe_fip) |
6729 | { |
6730 | uint8_t event_type = bf_get(lpfc_trailer_type, acqe_fip); |
6731 | int rc; |
6732 | struct lpfc_vport *vport; |
6733 | struct lpfc_nodelist *ndlp; |
6734 | int active_vlink_present; |
6735 | struct lpfc_vport **vports; |
6736 | int i; |
6737 | |
6738 | phba->fc_eventTag = acqe_fip->event_tag; |
6739 | phba->fcoe_eventtag = acqe_fip->event_tag; |
6740 | switch (event_type) { |
6741 | case LPFC_FIP_EVENT_TYPE_NEW_FCF: |
6742 | case LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD: |
6743 | if (event_type == LPFC_FIP_EVENT_TYPE_NEW_FCF) |
6744 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6745 | "2546 New FCF event, evt_tag:x%x, " |
6746 | "index:x%x\n" , |
6747 | acqe_fip->event_tag, |
6748 | acqe_fip->index); |
6749 | else |
6750 | lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | |
6751 | LOG_DISCOVERY, |
6752 | "2788 FCF param modified event, " |
6753 | "evt_tag:x%x, index:x%x\n" , |
6754 | acqe_fip->event_tag, |
6755 | acqe_fip->index); |
6756 | if (phba->fcf.fcf_flag & FCF_DISCOVERY) { |
6757 | /* |
6758 | * During period of FCF discovery, read the FCF |
6759 | * table record indexed by the event to update |
6760 | * FCF roundrobin failover eligible FCF bmask. |
6761 | */ |
6762 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | |
6763 | LOG_DISCOVERY, |
6764 | "2779 Read FCF (x%x) for updating " |
6765 | "roundrobin FCF failover bmask\n" , |
6766 | acqe_fip->index); |
6767 | rc = lpfc_sli4_read_fcf_rec(phba, acqe_fip->index); |
6768 | } |
6769 | |
6770 | /* If the FCF discovery is in progress, do nothing. */ |
6771 | spin_lock_irq(lock: &phba->hbalock); |
6772 | if (phba->hba_flag & FCF_TS_INPROG) { |
6773 | spin_unlock_irq(lock: &phba->hbalock); |
6774 | break; |
6775 | } |
6776 | /* If fast FCF failover rescan event is pending, do nothing */ |
6777 | if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) { |
6778 | spin_unlock_irq(lock: &phba->hbalock); |
6779 | break; |
6780 | } |
6781 | |
6782 | /* If the FCF has been in discovered state, do nothing. */ |
6783 | if (phba->fcf.fcf_flag & FCF_SCAN_DONE) { |
6784 | spin_unlock_irq(lock: &phba->hbalock); |
6785 | break; |
6786 | } |
6787 | spin_unlock_irq(lock: &phba->hbalock); |
6788 | |
6789 | /* Otherwise, scan the entire FCF table and re-discover SAN */ |
6790 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, |
6791 | "2770 Start FCF table scan per async FCF " |
6792 | "event, evt_tag:x%x, index:x%x\n" , |
6793 | acqe_fip->event_tag, acqe_fip->index); |
6794 | rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, |
6795 | LPFC_FCOE_FCF_GET_FIRST); |
6796 | if (rc) |
6797 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6798 | "2547 Issue FCF scan read FCF mailbox " |
6799 | "command failed (x%x)\n" , rc); |
6800 | break; |
6801 | |
6802 | case LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL: |
6803 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6804 | "2548 FCF Table full count 0x%x tag 0x%x\n" , |
6805 | bf_get(lpfc_acqe_fip_fcf_count, acqe_fip), |
6806 | acqe_fip->event_tag); |
6807 | break; |
6808 | |
6809 | case LPFC_FIP_EVENT_TYPE_FCF_DEAD: |
6810 | phba->fcoe_cvl_eventtag = acqe_fip->event_tag; |
6811 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6812 | "2549 FCF (x%x) disconnected from network, " |
6813 | "tag:x%x\n" , acqe_fip->index, |
6814 | acqe_fip->event_tag); |
6815 | /* |
6816 | * If we are in the middle of FCF failover process, clear |
6817 | * the corresponding FCF bit in the roundrobin bitmap. |
6818 | */ |
6819 | spin_lock_irq(lock: &phba->hbalock); |
6820 | if ((phba->fcf.fcf_flag & FCF_DISCOVERY) && |
6821 | (phba->fcf.current_rec.fcf_indx != acqe_fip->index)) { |
6822 | spin_unlock_irq(lock: &phba->hbalock); |
6823 | /* Update FLOGI FCF failover eligible FCF bmask */ |
6824 | lpfc_sli4_fcf_rr_index_clear(phba, acqe_fip->index); |
6825 | break; |
6826 | } |
6827 | spin_unlock_irq(lock: &phba->hbalock); |
6828 | |
6829 | /* If the event is not for currently used fcf do nothing */ |
6830 | if (phba->fcf.current_rec.fcf_indx != acqe_fip->index) |
6831 | break; |
6832 | |
6833 | /* |
6834 | * Otherwise, request the port to rediscover the entire FCF |
6835 | * table for a fast recovery from case that the current FCF |
6836 | * is no longer valid as we are not in the middle of FCF |
6837 | * failover process already. |
6838 | */ |
6839 | spin_lock_irq(lock: &phba->hbalock); |
6840 | /* Mark the fast failover process in progress */ |
6841 | phba->fcf.fcf_flag |= FCF_DEAD_DISC; |
6842 | spin_unlock_irq(lock: &phba->hbalock); |
6843 | |
6844 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, |
6845 | "2771 Start FCF fast failover process due to " |
6846 | "FCF DEAD event: evt_tag:x%x, fcf_index:x%x " |
6847 | "\n" , acqe_fip->event_tag, acqe_fip->index); |
6848 | rc = lpfc_sli4_redisc_fcf_table(phba); |
6849 | if (rc) { |
6850 | lpfc_printf_log(phba, KERN_ERR, LOG_FIP | |
6851 | LOG_TRACE_EVENT, |
6852 | "2772 Issue FCF rediscover mailbox " |
6853 | "command failed, fail through to FCF " |
6854 | "dead event\n" ); |
6855 | spin_lock_irq(lock: &phba->hbalock); |
6856 | phba->fcf.fcf_flag &= ~FCF_DEAD_DISC; |
6857 | spin_unlock_irq(lock: &phba->hbalock); |
6858 | /* |
6859 | * Last resort will fail over by treating this |
6860 | * as a link down to FCF registration. |
6861 | */ |
6862 | lpfc_sli4_fcf_dead_failthrough(phba); |
6863 | } else { |
6864 | /* Reset FCF roundrobin bmask for new discovery */ |
6865 | lpfc_sli4_clear_fcf_rr_bmask(phba); |
6866 | /* |
6867 | * Handling fast FCF failover to a DEAD FCF event is |
6868 | * considered equalivant to receiving CVL to all vports. |
6869 | */ |
6870 | lpfc_sli4_perform_all_vport_cvl(phba); |
6871 | } |
6872 | break; |
6873 | case LPFC_FIP_EVENT_TYPE_CVL: |
6874 | phba->fcoe_cvl_eventtag = acqe_fip->event_tag; |
6875 | lpfc_printf_log(phba, KERN_ERR, |
6876 | LOG_TRACE_EVENT, |
6877 | "2718 Clear Virtual Link Received for VPI 0x%x" |
6878 | " tag 0x%x\n" , acqe_fip->index, acqe_fip->event_tag); |
6879 | |
6880 | vport = lpfc_find_vport_by_vpid(phba, |
6881 | acqe_fip->index); |
6882 | ndlp = lpfc_sli4_perform_vport_cvl(vport); |
6883 | if (!ndlp) |
6884 | break; |
6885 | active_vlink_present = 0; |
6886 | |
6887 | vports = lpfc_create_vport_work_array(phba); |
6888 | if (vports) { |
6889 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; |
6890 | i++) { |
6891 | if ((!(vports[i]->fc_flag & |
6892 | FC_VPORT_CVL_RCVD)) && |
6893 | (vports[i]->port_state > LPFC_FDISC)) { |
6894 | active_vlink_present = 1; |
6895 | break; |
6896 | } |
6897 | } |
6898 | lpfc_destroy_vport_work_array(phba, vports); |
6899 | } |
6900 | |
6901 | /* |
6902 | * Don't re-instantiate if vport is marked for deletion. |
6903 | * If we are here first then vport_delete is going to wait |
6904 | * for discovery to complete. |
6905 | */ |
6906 | if (!(vport->load_flag & FC_UNLOADING) && |
6907 | active_vlink_present) { |
6908 | /* |
6909 | * If there are other active VLinks present, |
6910 | * re-instantiate the Vlink using FDISC. |
6911 | */ |
6912 | mod_timer(timer: &ndlp->nlp_delayfunc, |
6913 | expires: jiffies + msecs_to_jiffies(m: 1000)); |
6914 | spin_lock_irq(lock: &ndlp->lock); |
6915 | ndlp->nlp_flag |= NLP_DELAY_TMO; |
6916 | spin_unlock_irq(lock: &ndlp->lock); |
6917 | ndlp->nlp_last_elscmd = ELS_CMD_FDISC; |
6918 | vport->port_state = LPFC_FDISC; |
6919 | } else { |
6920 | /* |
6921 | * Otherwise, we request port to rediscover |
6922 | * the entire FCF table for a fast recovery |
6923 | * from possible case that the current FCF |
6924 | * is no longer valid if we are not already |
6925 | * in the FCF failover process. |
6926 | */ |
6927 | spin_lock_irq(lock: &phba->hbalock); |
6928 | if (phba->fcf.fcf_flag & FCF_DISCOVERY) { |
6929 | spin_unlock_irq(lock: &phba->hbalock); |
6930 | break; |
6931 | } |
6932 | /* Mark the fast failover process in progress */ |
6933 | phba->fcf.fcf_flag |= FCF_ACVL_DISC; |
6934 | spin_unlock_irq(lock: &phba->hbalock); |
6935 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | |
6936 | LOG_DISCOVERY, |
6937 | "2773 Start FCF failover per CVL, " |
6938 | "evt_tag:x%x\n" , acqe_fip->event_tag); |
6939 | rc = lpfc_sli4_redisc_fcf_table(phba); |
6940 | if (rc) { |
6941 | lpfc_printf_log(phba, KERN_ERR, LOG_FIP | |
6942 | LOG_TRACE_EVENT, |
6943 | "2774 Issue FCF rediscover " |
6944 | "mailbox command failed, " |
6945 | "through to CVL event\n" ); |
6946 | spin_lock_irq(lock: &phba->hbalock); |
6947 | phba->fcf.fcf_flag &= ~FCF_ACVL_DISC; |
6948 | spin_unlock_irq(lock: &phba->hbalock); |
6949 | /* |
6950 | * Last resort will be re-try on the |
6951 | * the current registered FCF entry. |
6952 | */ |
6953 | lpfc_retry_pport_discovery(phba); |
6954 | } else |
6955 | /* |
6956 | * Reset FCF roundrobin bmask for new |
6957 | * discovery. |
6958 | */ |
6959 | lpfc_sli4_clear_fcf_rr_bmask(phba); |
6960 | } |
6961 | break; |
6962 | default: |
6963 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6964 | "0288 Unknown FCoE event type 0x%x event tag " |
6965 | "0x%x\n" , event_type, acqe_fip->event_tag); |
6966 | break; |
6967 | } |
6968 | } |
6969 | |
6970 | /** |
6971 | * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event |
6972 | * @phba: pointer to lpfc hba data structure. |
6973 | * @acqe_dcbx: pointer to the async dcbx completion queue entry. |
6974 | * |
6975 | * This routine is to handle the SLI4 asynchronous dcbx event. |
6976 | **/ |
6977 | static void |
6978 | lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba, |
6979 | struct lpfc_acqe_dcbx *acqe_dcbx) |
6980 | { |
6981 | phba->fc_eventTag = acqe_dcbx->event_tag; |
6982 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
6983 | "0290 The SLI4 DCBX asynchronous event is not " |
6984 | "handled yet\n" ); |
6985 | } |
6986 | |
6987 | /** |
6988 | * lpfc_sli4_async_grp5_evt - Process the asynchronous group5 event |
6989 | * @phba: pointer to lpfc hba data structure. |
6990 | * @acqe_grp5: pointer to the async grp5 completion queue entry. |
6991 | * |
6992 | * This routine is to handle the SLI4 asynchronous grp5 event. A grp5 event |
6993 | * is an asynchronous notified of a logical link speed change. The Port |
6994 | * reports the logical link speed in units of 10Mbps. |
6995 | **/ |
6996 | static void |
6997 | lpfc_sli4_async_grp5_evt(struct lpfc_hba *phba, |
6998 | struct lpfc_acqe_grp5 *acqe_grp5) |
6999 | { |
7000 | uint16_t prev_ll_spd; |
7001 | |
7002 | phba->fc_eventTag = acqe_grp5->event_tag; |
7003 | phba->fcoe_eventtag = acqe_grp5->event_tag; |
7004 | prev_ll_spd = phba->sli4_hba.link_state.logical_speed; |
7005 | phba->sli4_hba.link_state.logical_speed = |
7006 | (bf_get(lpfc_acqe_grp5_llink_spd, acqe_grp5)) * 10; |
7007 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
7008 | "2789 GRP5 Async Event: Updating logical link speed " |
7009 | "from %dMbps to %dMbps\n" , prev_ll_spd, |
7010 | phba->sli4_hba.link_state.logical_speed); |
7011 | } |
7012 | |
7013 | /** |
7014 | * lpfc_sli4_async_cmstat_evt - Process the asynchronous cmstat event |
7015 | * @phba: pointer to lpfc hba data structure. |
7016 | * |
7017 | * This routine is to handle the SLI4 asynchronous cmstat event. A cmstat event |
7018 | * is an asynchronous notification of a request to reset CM stats. |
7019 | **/ |
7020 | static void |
7021 | lpfc_sli4_async_cmstat_evt(struct lpfc_hba *phba) |
7022 | { |
7023 | if (!phba->cgn_i) |
7024 | return; |
7025 | lpfc_init_congestion_stat(phba); |
7026 | } |
7027 | |
7028 | /** |
7029 | * lpfc_cgn_params_val - Validate FW congestion parameters. |
7030 | * @phba: pointer to lpfc hba data structure. |
7031 | * @p_cfg_param: pointer to FW provided congestion parameters. |
7032 | * |
7033 | * This routine validates the congestion parameters passed |
7034 | * by the FW to the driver via an ACQE event. |
7035 | **/ |
7036 | static void |
7037 | lpfc_cgn_params_val(struct lpfc_hba *phba, struct lpfc_cgn_param *p_cfg_param) |
7038 | { |
7039 | spin_lock_irq(lock: &phba->hbalock); |
7040 | |
7041 | if (!lpfc_rangecheck(p_cfg_param->cgn_param_mode, LPFC_CFG_OFF, |
7042 | LPFC_CFG_MONITOR)) { |
7043 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT, |
7044 | "6225 CMF mode param out of range: %d\n" , |
7045 | p_cfg_param->cgn_param_mode); |
7046 | p_cfg_param->cgn_param_mode = LPFC_CFG_OFF; |
7047 | } |
7048 | |
7049 | spin_unlock_irq(lock: &phba->hbalock); |
7050 | } |
7051 | |
7052 | static const char * const lpfc_cmf_mode_to_str[] = { |
7053 | "OFF" , |
7054 | "MANAGED" , |
7055 | "MONITOR" , |
7056 | }; |
7057 | |
7058 | /** |
7059 | * lpfc_cgn_params_parse - Process a FW cong parm change event |
7060 | * @phba: pointer to lpfc hba data structure. |
7061 | * @p_cgn_param: pointer to a data buffer with the FW cong params. |
7062 | * @len: the size of pdata in bytes. |
7063 | * |
7064 | * This routine validates the congestion management buffer signature |
7065 | * from the FW, validates the contents and makes corrections for |
7066 | * valid, in-range values. If the signature magic is correct and |
7067 | * after parameter validation, the contents are copied to the driver's |
7068 | * @phba structure. If the magic is incorrect, an error message is |
7069 | * logged. |
7070 | **/ |
7071 | static void |
7072 | lpfc_cgn_params_parse(struct lpfc_hba *phba, |
7073 | struct lpfc_cgn_param *p_cgn_param, uint32_t len) |
7074 | { |
7075 | struct lpfc_cgn_info *cp; |
7076 | uint32_t crc, oldmode; |
7077 | char acr_string[4] = {0}; |
7078 | |
7079 | /* Make sure the FW has encoded the correct magic number to |
7080 | * validate the congestion parameter in FW memory. |
7081 | */ |
7082 | if (p_cgn_param->cgn_param_magic == LPFC_CFG_PARAM_MAGIC_NUM) { |
7083 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT, |
7084 | "4668 FW cgn parm buffer data: " |
7085 | "magic 0x%x version %d mode %d " |
7086 | "level0 %d level1 %d " |
7087 | "level2 %d byte13 %d " |
7088 | "byte14 %d byte15 %d " |
7089 | "byte11 %d byte12 %d activeMode %d\n" , |
7090 | p_cgn_param->cgn_param_magic, |
7091 | p_cgn_param->cgn_param_version, |
7092 | p_cgn_param->cgn_param_mode, |
7093 | p_cgn_param->cgn_param_level0, |
7094 | p_cgn_param->cgn_param_level1, |
7095 | p_cgn_param->cgn_param_level2, |
7096 | p_cgn_param->byte13, |
7097 | p_cgn_param->byte14, |
7098 | p_cgn_param->byte15, |
7099 | p_cgn_param->byte11, |
7100 | p_cgn_param->byte12, |
7101 | phba->cmf_active_mode); |
7102 | |
7103 | oldmode = phba->cmf_active_mode; |
7104 | |
7105 | /* Any parameters out of range are corrected to defaults |
7106 | * by this routine. No need to fail. |
7107 | */ |
7108 | lpfc_cgn_params_val(phba, p_cfg_param: p_cgn_param); |
7109 | |
7110 | /* Parameters are verified, move them into driver storage */ |
7111 | spin_lock_irq(lock: &phba->hbalock); |
7112 | memcpy(&phba->cgn_p, p_cgn_param, |
7113 | sizeof(struct lpfc_cgn_param)); |
7114 | |
7115 | /* Update parameters in congestion info buffer now */ |
7116 | if (phba->cgn_i) { |
7117 | cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; |
7118 | cp->cgn_info_mode = phba->cgn_p.cgn_param_mode; |
7119 | cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0; |
7120 | cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1; |
7121 | cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2; |
7122 | crc = lpfc_cgn_calc_crc32(bufp: cp, LPFC_CGN_INFO_SZ, |
7123 | LPFC_CGN_CRC32_SEED); |
7124 | cp->cgn_info_crc = cpu_to_le32(crc); |
7125 | } |
7126 | spin_unlock_irq(lock: &phba->hbalock); |
7127 | |
7128 | phba->cmf_active_mode = phba->cgn_p.cgn_param_mode; |
7129 | |
7130 | switch (oldmode) { |
7131 | case LPFC_CFG_OFF: |
7132 | if (phba->cgn_p.cgn_param_mode != LPFC_CFG_OFF) { |
7133 | /* Turning CMF on */ |
7134 | lpfc_cmf_start(phba); |
7135 | |
7136 | if (phba->link_state >= LPFC_LINK_UP) { |
7137 | phba->cgn_reg_fpin = |
7138 | phba->cgn_init_reg_fpin; |
7139 | phba->cgn_reg_signal = |
7140 | phba->cgn_init_reg_signal; |
7141 | lpfc_issue_els_edc(vport: phba->pport, retry: 0); |
7142 | } |
7143 | } |
7144 | break; |
7145 | case LPFC_CFG_MANAGED: |
7146 | switch (phba->cgn_p.cgn_param_mode) { |
7147 | case LPFC_CFG_OFF: |
7148 | /* Turning CMF off */ |
7149 | lpfc_cmf_stop(phba); |
7150 | if (phba->link_state >= LPFC_LINK_UP) |
7151 | lpfc_issue_els_edc(vport: phba->pport, retry: 0); |
7152 | break; |
7153 | case LPFC_CFG_MONITOR: |
7154 | phba->cmf_max_bytes_per_interval = |
7155 | phba->cmf_link_byte_count; |
7156 | |
7157 | /* Resume blocked IO - unblock on workqueue */ |
7158 | queue_work(wq: phba->wq, |
7159 | work: &phba->unblock_request_work); |
7160 | break; |
7161 | } |
7162 | break; |
7163 | case LPFC_CFG_MONITOR: |
7164 | switch (phba->cgn_p.cgn_param_mode) { |
7165 | case LPFC_CFG_OFF: |
7166 | /* Turning CMF off */ |
7167 | lpfc_cmf_stop(phba); |
7168 | if (phba->link_state >= LPFC_LINK_UP) |
7169 | lpfc_issue_els_edc(vport: phba->pport, retry: 0); |
7170 | break; |
7171 | case LPFC_CFG_MANAGED: |
7172 | lpfc_cmf_signal_init(phba); |
7173 | break; |
7174 | } |
7175 | break; |
7176 | } |
7177 | if (oldmode != LPFC_CFG_OFF || |
7178 | oldmode != phba->cgn_p.cgn_param_mode) { |
7179 | if (phba->cgn_p.cgn_param_mode == LPFC_CFG_MANAGED) |
7180 | scnprintf(buf: acr_string, size: sizeof(acr_string), fmt: "%u" , |
7181 | phba->cgn_p.cgn_param_level0); |
7182 | else |
7183 | scnprintf(buf: acr_string, size: sizeof(acr_string), fmt: "NA" ); |
7184 | |
7185 | dev_info(&phba->pcidev->dev, "%d: " |
7186 | "4663 CMF: Mode %s acr %s\n" , |
7187 | phba->brd_no, |
7188 | lpfc_cmf_mode_to_str |
7189 | [phba->cgn_p.cgn_param_mode], |
7190 | acr_string); |
7191 | } |
7192 | } else { |
7193 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, |
7194 | "4669 FW cgn parm buf wrong magic 0x%x " |
7195 | "version %d\n" , p_cgn_param->cgn_param_magic, |
7196 | p_cgn_param->cgn_param_version); |
7197 | } |
7198 | } |
7199 | |
7200 | /** |
7201 | * lpfc_sli4_cgn_params_read - Read and Validate FW congestion parameters. |
7202 | * @phba: pointer to lpfc hba data structure. |
7203 | * |
7204 | * This routine issues a read_object mailbox command to |
7205 | * get the congestion management parameters from the FW |
7206 | * parses it and updates the driver maintained values. |
7207 | * |
7208 | * Returns |
7209 | * 0 if the object was empty |
7210 | * -Eval if an error was encountered |
7211 | * Count if bytes were read from object |
7212 | **/ |
7213 | int |
7214 | lpfc_sli4_cgn_params_read(struct lpfc_hba *phba) |
7215 | { |
7216 | int ret = 0; |
7217 | struct lpfc_cgn_param *p_cgn_param = NULL; |
7218 | u32 *pdata = NULL; |
7219 | u32 len = 0; |
7220 | |
7221 | /* Find out if the FW has a new set of congestion parameters. */ |
7222 | len = sizeof(struct lpfc_cgn_param); |
7223 | pdata = kzalloc(size: len, GFP_KERNEL); |
7224 | if (!pdata) |
7225 | return -ENOMEM; |
7226 | ret = lpfc_read_object(phba, s: (char *)LPFC_PORT_CFG_NAME, |
7227 | datap: pdata, len); |
7228 | |
7229 | /* 0 means no data. A negative means error. A positive means |
7230 | * bytes were copied. |
7231 | */ |
7232 | if (!ret) { |
7233 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, |
7234 | "4670 CGN RD OBJ returns no data\n" ); |
7235 | goto rd_obj_err; |
7236 | } else if (ret < 0) { |
7237 | /* Some error. Just exit and return it to the caller.*/ |
7238 | goto rd_obj_err; |
7239 | } |
7240 | |
7241 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT | LOG_INIT, |
7242 | "6234 READ CGN PARAMS Successful %d\n" , len); |
7243 | |
7244 | /* Parse data pointer over len and update the phba congestion |
7245 | * parameters with values passed back. The receive rate values |
7246 | * may have been altered in FW, but take no action here. |
7247 | */ |
7248 | p_cgn_param = (struct lpfc_cgn_param *)pdata; |
7249 | lpfc_cgn_params_parse(phba, p_cgn_param, len); |
7250 | |
7251 | rd_obj_err: |
7252 | kfree(objp: pdata); |
7253 | return ret; |
7254 | } |
7255 | |
7256 | /** |
7257 | * lpfc_sli4_cgn_parm_chg_evt - Process a FW congestion param change event |
7258 | * @phba: pointer to lpfc hba data structure. |
7259 | * |
7260 | * The FW generated Async ACQE SLI event calls this routine when |
7261 | * the event type is an SLI Internal Port Event and the Event Code |
7262 | * indicates a change to the FW maintained congestion parameters. |
7263 | * |
7264 | * This routine executes a Read_Object mailbox call to obtain the |
7265 | * current congestion parameters maintained in FW and corrects |
7266 | * the driver's active congestion parameters. |
7267 | * |
7268 | * The acqe event is not passed because there is no further data |
7269 | * required. |
7270 | * |
7271 | * Returns nonzero error if event processing encountered an error. |
7272 | * Zero otherwise for success. |
7273 | **/ |
7274 | static int |
7275 | lpfc_sli4_cgn_parm_chg_evt(struct lpfc_hba *phba) |
7276 | { |
7277 | int ret = 0; |
7278 | |
7279 | if (!phba->sli4_hba.pc_sli4_params.cmf) { |
7280 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, |
7281 | "4664 Cgn Evt when E2E off. Drop event\n" ); |
7282 | return -EACCES; |
7283 | } |
7284 | |
7285 | /* If the event is claiming an empty object, it's ok. A write |
7286 | * could have cleared it. Only error is a negative return |
7287 | * status. |
7288 | */ |
7289 | ret = lpfc_sli4_cgn_params_read(phba); |
7290 | if (ret < 0) { |
7291 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, |
7292 | "4667 Error reading Cgn Params (%d)\n" , |
7293 | ret); |
7294 | } else if (!ret) { |
7295 | lpfc_printf_log(phba, KERN_ERR, LOG_CGN_MGMT | LOG_INIT, |
7296 | "4673 CGN Event empty object.\n" ); |
7297 | } |
7298 | return ret; |
7299 | } |
7300 | |
7301 | /** |
7302 | * lpfc_sli4_async_event_proc - Process all the pending asynchronous event |
7303 | * @phba: pointer to lpfc hba data structure. |
7304 | * |
7305 | * This routine is invoked by the worker thread to process all the pending |
7306 | * SLI4 asynchronous events. |
7307 | **/ |
7308 | void lpfc_sli4_async_event_proc(struct lpfc_hba *phba) |
7309 | { |
7310 | struct lpfc_cq_event *cq_event; |
7311 | unsigned long iflags; |
7312 | |
7313 | /* First, declare the async event has been handled */ |
7314 | spin_lock_irqsave(&phba->hbalock, iflags); |
7315 | phba->hba_flag &= ~ASYNC_EVENT; |
7316 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflags); |
7317 | |
7318 | /* Now, handle all the async events */ |
7319 | spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags); |
7320 | while (!list_empty(head: &phba->sli4_hba.sp_asynce_work_queue)) { |
7321 | list_remove_head(&phba->sli4_hba.sp_asynce_work_queue, |
7322 | cq_event, struct lpfc_cq_event, list); |
7323 | spin_unlock_irqrestore(lock: &phba->sli4_hba.asynce_list_lock, |
7324 | flags: iflags); |
7325 | |
7326 | /* Process the asynchronous event */ |
7327 | switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) { |
7328 | case LPFC_TRAILER_CODE_LINK: |
7329 | lpfc_sli4_async_link_evt(phba, |
7330 | acqe_link: &cq_event->cqe.acqe_link); |
7331 | break; |
7332 | case LPFC_TRAILER_CODE_FCOE: |
7333 | lpfc_sli4_async_fip_evt(phba, acqe_fip: &cq_event->cqe.acqe_fip); |
7334 | break; |
7335 | case LPFC_TRAILER_CODE_DCBX: |
7336 | lpfc_sli4_async_dcbx_evt(phba, |
7337 | acqe_dcbx: &cq_event->cqe.acqe_dcbx); |
7338 | break; |
7339 | case LPFC_TRAILER_CODE_GRP5: |
7340 | lpfc_sli4_async_grp5_evt(phba, |
7341 | acqe_grp5: &cq_event->cqe.acqe_grp5); |
7342 | break; |
7343 | case LPFC_TRAILER_CODE_FC: |
7344 | lpfc_sli4_async_fc_evt(phba, acqe_fc: &cq_event->cqe.acqe_fc); |
7345 | break; |
7346 | case LPFC_TRAILER_CODE_SLI: |
7347 | lpfc_sli4_async_sli_evt(phba, acqe_sli: &cq_event->cqe.acqe_sli); |
7348 | break; |
7349 | case LPFC_TRAILER_CODE_CMSTAT: |
7350 | lpfc_sli4_async_cmstat_evt(phba); |
7351 | break; |
7352 | default: |
7353 | lpfc_printf_log(phba, KERN_ERR, |
7354 | LOG_TRACE_EVENT, |
7355 | "1804 Invalid asynchronous event code: " |
7356 | "x%x\n" , bf_get(lpfc_trailer_code, |
7357 | &cq_event->cqe.mcqe_cmpl)); |
7358 | break; |
7359 | } |
7360 | |
7361 | /* Free the completion event processed to the free pool */ |
7362 | lpfc_sli4_cq_event_release(phba, cq_event); |
7363 | spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags); |
7364 | } |
7365 | spin_unlock_irqrestore(lock: &phba->sli4_hba.asynce_list_lock, flags: iflags); |
7366 | } |
7367 | |
7368 | /** |
7369 | * lpfc_sli4_fcf_redisc_event_proc - Process fcf table rediscovery event |
7370 | * @phba: pointer to lpfc hba data structure. |
7371 | * |
7372 | * This routine is invoked by the worker thread to process FCF table |
7373 | * rediscovery pending completion event. |
7374 | **/ |
7375 | void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *phba) |
7376 | { |
7377 | int rc; |
7378 | |
7379 | spin_lock_irq(lock: &phba->hbalock); |
7380 | /* Clear FCF rediscovery timeout event */ |
7381 | phba->fcf.fcf_flag &= ~FCF_REDISC_EVT; |
7382 | /* Clear driver fast failover FCF record flag */ |
7383 | phba->fcf.failover_rec.flag = 0; |
7384 | /* Set state for FCF fast failover */ |
7385 | phba->fcf.fcf_flag |= FCF_REDISC_FOV; |
7386 | spin_unlock_irq(lock: &phba->hbalock); |
7387 | |
7388 | /* Scan FCF table from the first entry to re-discover SAN */ |
7389 | lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY, |
7390 | "2777 Start post-quiescent FCF table scan\n" ); |
7391 | rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST); |
7392 | if (rc) |
7393 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
7394 | "2747 Issue FCF scan read FCF mailbox " |
7395 | "command failed 0x%x\n" , rc); |
7396 | } |
7397 | |
7398 | /** |
7399 | * lpfc_api_table_setup - Set up per hba pci-device group func api jump table |
7400 | * @phba: pointer to lpfc hba data structure. |
7401 | * @dev_grp: The HBA PCI-Device group number. |
7402 | * |
7403 | * This routine is invoked to set up the per HBA PCI-Device group function |
7404 | * API jump table entries. |
7405 | * |
7406 | * Return: 0 if success, otherwise -ENODEV |
7407 | **/ |
7408 | int |
7409 | lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) |
7410 | { |
7411 | int rc; |
7412 | |
7413 | /* Set up lpfc PCI-device group */ |
7414 | phba->pci_dev_grp = dev_grp; |
7415 | |
7416 | /* The LPFC_PCI_DEV_OC uses SLI4 */ |
7417 | if (dev_grp == LPFC_PCI_DEV_OC) |
7418 | phba->sli_rev = LPFC_SLI_REV4; |
7419 | |
7420 | /* Set up device INIT API function jump table */ |
7421 | rc = lpfc_init_api_table_setup(phba, dev_grp); |
7422 | if (rc) |
7423 | return -ENODEV; |
7424 | /* Set up SCSI API function jump table */ |
7425 | rc = lpfc_scsi_api_table_setup(phba, dev_grp); |
7426 | if (rc) |
7427 | return -ENODEV; |
7428 | /* Set up SLI API function jump table */ |
7429 | rc = lpfc_sli_api_table_setup(phba, dev_grp); |
7430 | if (rc) |
7431 | return -ENODEV; |
7432 | /* Set up MBOX API function jump table */ |
7433 | rc = lpfc_mbox_api_table_setup(phba, dev_grp); |
7434 | if (rc) |
7435 | return -ENODEV; |
7436 | |
7437 | return 0; |
7438 | } |
7439 | |
7440 | /** |
7441 | * lpfc_log_intr_mode - Log the active interrupt mode |
7442 | * @phba: pointer to lpfc hba data structure. |
7443 | * @intr_mode: active interrupt mode adopted. |
7444 | * |
7445 | * This routine it invoked to log the currently used active interrupt mode |
7446 | * to the device. |
7447 | **/ |
7448 | static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode) |
7449 | { |
7450 | switch (intr_mode) { |
7451 | case 0: |
7452 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
7453 | "0470 Enable INTx interrupt mode.\n" ); |
7454 | break; |
7455 | case 1: |
7456 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
7457 | "0481 Enabled MSI interrupt mode.\n" ); |
7458 | break; |
7459 | case 2: |
7460 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
7461 | "0480 Enabled MSI-X interrupt mode.\n" ); |
7462 | break; |
7463 | default: |
7464 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
7465 | "0482 Illegal interrupt mode.\n" ); |
7466 | break; |
7467 | } |
7468 | return; |
7469 | } |
7470 | |
7471 | /** |
7472 | * lpfc_enable_pci_dev - Enable a generic PCI device. |
7473 | * @phba: pointer to lpfc hba data structure. |
7474 | * |
7475 | * This routine is invoked to enable the PCI device that is common to all |
7476 | * PCI devices. |
7477 | * |
7478 | * Return codes |
7479 | * 0 - successful |
7480 | * other values - error |
7481 | **/ |
7482 | static int |
7483 | lpfc_enable_pci_dev(struct lpfc_hba *phba) |
7484 | { |
7485 | struct pci_dev *pdev; |
7486 | |
7487 | /* Obtain PCI device reference */ |
7488 | if (!phba->pcidev) |
7489 | goto out_error; |
7490 | else |
7491 | pdev = phba->pcidev; |
7492 | /* Enable PCI device */ |
7493 | if (pci_enable_device_mem(dev: pdev)) |
7494 | goto out_error; |
7495 | /* Request PCI resource for the device */ |
7496 | if (pci_request_mem_regions(pdev, LPFC_DRIVER_NAME)) |
7497 | goto out_disable_device; |
7498 | /* Set up device as PCI master and save state for EEH */ |
7499 | pci_set_master(dev: pdev); |
7500 | pci_try_set_mwi(dev: pdev); |
7501 | pci_save_state(dev: pdev); |
7502 | |
7503 | /* PCIe EEH recovery on powerpc platforms needs fundamental reset */ |
7504 | if (pci_is_pcie(dev: pdev)) |
7505 | pdev->needs_freset = 1; |
7506 | |
7507 | return 0; |
7508 | |
7509 | out_disable_device: |
7510 | pci_disable_device(dev: pdev); |
7511 | out_error: |
7512 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
7513 | "1401 Failed to enable pci device\n" ); |
7514 | return -ENODEV; |
7515 | } |
7516 | |
7517 | /** |
7518 | * lpfc_disable_pci_dev - Disable a generic PCI device. |
7519 | * @phba: pointer to lpfc hba data structure. |
7520 | * |
7521 | * This routine is invoked to disable the PCI device that is common to all |
7522 | * PCI devices. |
7523 | **/ |
7524 | static void |
7525 | lpfc_disable_pci_dev(struct lpfc_hba *phba) |
7526 | { |
7527 | struct pci_dev *pdev; |
7528 | |
7529 | /* Obtain PCI device reference */ |
7530 | if (!phba->pcidev) |
7531 | return; |
7532 | else |
7533 | pdev = phba->pcidev; |
7534 | /* Release PCI resource and disable PCI device */ |
7535 | pci_release_mem_regions(pdev); |
7536 | pci_disable_device(dev: pdev); |
7537 | |
7538 | return; |
7539 | } |
7540 | |
7541 | /** |
7542 | * lpfc_reset_hba - Reset a hba |
7543 | * @phba: pointer to lpfc hba data structure. |
7544 | * |
7545 | * This routine is invoked to reset a hba device. It brings the HBA |
7546 | * offline, performs a board restart, and then brings the board back |
7547 | * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up |
7548 | * on outstanding mailbox commands. |
7549 | **/ |
7550 | void |
7551 | lpfc_reset_hba(struct lpfc_hba *phba) |
7552 | { |
7553 | int rc = 0; |
7554 | |
7555 | /* If resets are disabled then set error state and return. */ |
7556 | if (!phba->cfg_enable_hba_reset) { |
7557 | phba->link_state = LPFC_HBA_ERROR; |
7558 | return; |
7559 | } |
7560 | |
7561 | /* If not LPFC_SLI_ACTIVE, force all IO to be flushed */ |
7562 | if (phba->sli.sli_flag & LPFC_SLI_ACTIVE) { |
7563 | lpfc_offline_prep(phba, LPFC_MBX_WAIT); |
7564 | } else { |
7565 | if (test_bit(MBX_TMO_ERR, &phba->bit_flags)) { |
7566 | /* Perform a PCI function reset to start from clean */ |
7567 | rc = lpfc_pci_function_reset(phba); |
7568 | lpfc_els_flush_all_cmd(phba); |
7569 | } |
7570 | lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); |
7571 | lpfc_sli_flush_io_rings(phba); |
7572 | } |
7573 | lpfc_offline(phba); |
7574 | clear_bit(nr: MBX_TMO_ERR, addr: &phba->bit_flags); |
7575 | if (unlikely(rc)) { |
7576 | lpfc_printf_log(phba, KERN_ERR, LOG_SLI, |
7577 | "8888 PCI function reset failed rc %x\n" , |
7578 | rc); |
7579 | } else { |
7580 | lpfc_sli_brdrestart(phba); |
7581 | lpfc_online(phba); |
7582 | lpfc_unblock_mgmt_io(phba); |
7583 | } |
7584 | } |
7585 | |
7586 | /** |
7587 | * lpfc_sli_sriov_nr_virtfn_get - Get the number of sr-iov virtual functions |
7588 | * @phba: pointer to lpfc hba data structure. |
7589 | * |
7590 | * This function enables the PCI SR-IOV virtual functions to a physical |
7591 | * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to |
7592 | * enable the number of virtual functions to the physical function. As |
7593 | * not all devices support SR-IOV, the return code from the pci_enable_sriov() |
7594 | * API call does not considered as an error condition for most of the device. |
7595 | **/ |
7596 | uint16_t |
7597 | lpfc_sli_sriov_nr_virtfn_get(struct lpfc_hba *phba) |
7598 | { |
7599 | struct pci_dev *pdev = phba->pcidev; |
7600 | uint16_t nr_virtfn; |
7601 | int pos; |
7602 | |
7603 | pos = pci_find_ext_capability(dev: pdev, PCI_EXT_CAP_ID_SRIOV); |
7604 | if (pos == 0) |
7605 | return 0; |
7606 | |
7607 | pci_read_config_word(dev: pdev, where: pos + PCI_SRIOV_TOTAL_VF, val: &nr_virtfn); |
7608 | return nr_virtfn; |
7609 | } |
7610 | |
7611 | /** |
7612 | * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions |
7613 | * @phba: pointer to lpfc hba data structure. |
7614 | * @nr_vfn: number of virtual functions to be enabled. |
7615 | * |
7616 | * This function enables the PCI SR-IOV virtual functions to a physical |
7617 | * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to |
7618 | * enable the number of virtual functions to the physical function. As |
7619 | * not all devices support SR-IOV, the return code from the pci_enable_sriov() |
7620 | * API call does not considered as an error condition for most of the device. |
7621 | **/ |
7622 | int |
7623 | lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn) |
7624 | { |
7625 | struct pci_dev *pdev = phba->pcidev; |
7626 | uint16_t max_nr_vfn; |
7627 | int rc; |
7628 | |
7629 | max_nr_vfn = lpfc_sli_sriov_nr_virtfn_get(phba); |
7630 | if (nr_vfn > max_nr_vfn) { |
7631 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
7632 | "3057 Requested vfs (%d) greater than " |
7633 | "supported vfs (%d)" , nr_vfn, max_nr_vfn); |
7634 | return -EINVAL; |
7635 | } |
7636 | |
7637 | rc = pci_enable_sriov(dev: pdev, nr_virtfn: nr_vfn); |
7638 | if (rc) { |
7639 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
7640 | "2806 Failed to enable sriov on this device " |
7641 | "with vfn number nr_vf:%d, rc:%d\n" , |
7642 | nr_vfn, rc); |
7643 | } else |
7644 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
7645 | "2807 Successful enable sriov on this device " |
7646 | "with vfn number nr_vf:%d\n" , nr_vfn); |
7647 | return rc; |
7648 | } |
7649 | |
7650 | static void |
7651 | lpfc_unblock_requests_work(struct work_struct *work) |
7652 | { |
7653 | struct lpfc_hba *phba = container_of(work, struct lpfc_hba, |
7654 | unblock_request_work); |
7655 | |
7656 | lpfc_unblock_requests(phba); |
7657 | } |
7658 | |
7659 | /** |
7660 | * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources. |
7661 | * @phba: pointer to lpfc hba data structure. |
7662 | * |
7663 | * This routine is invoked to set up the driver internal resources before the |
7664 | * device specific resource setup to support the HBA device it attached to. |
7665 | * |
7666 | * Return codes |
7667 | * 0 - successful |
7668 | * other values - error |
7669 | **/ |
7670 | static int |
7671 | lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba) |
7672 | { |
7673 | struct lpfc_sli *psli = &phba->sli; |
7674 | |
7675 | /* |
7676 | * Driver resources common to all SLI revisions |
7677 | */ |
7678 | atomic_set(v: &phba->fast_event_count, i: 0); |
7679 | atomic_set(v: &phba->dbg_log_idx, i: 0); |
7680 | atomic_set(v: &phba->dbg_log_cnt, i: 0); |
7681 | atomic_set(v: &phba->dbg_log_dmping, i: 0); |
7682 | spin_lock_init(&phba->hbalock); |
7683 | |
7684 | /* Initialize port_list spinlock */ |
7685 | spin_lock_init(&phba->port_list_lock); |
7686 | INIT_LIST_HEAD(list: &phba->port_list); |
7687 | |
7688 | INIT_LIST_HEAD(list: &phba->work_list); |
7689 | |
7690 | /* Initialize the wait queue head for the kernel thread */ |
7691 | init_waitqueue_head(&phba->work_waitq); |
7692 | |
7693 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
7694 | "1403 Protocols supported %s %s %s\n" , |
7695 | ((phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ? |
7696 | "SCSI" : " " ), |
7697 | ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) ? |
7698 | "NVME" : " " ), |
7699 | (phba->nvmet_support ? "NVMET" : " " )); |
7700 | |
7701 | /* Initialize the IO buffer list used by driver for SLI3 SCSI */ |
7702 | spin_lock_init(&phba->scsi_buf_list_get_lock); |
7703 | INIT_LIST_HEAD(list: &phba->lpfc_scsi_buf_list_get); |
7704 | spin_lock_init(&phba->scsi_buf_list_put_lock); |
7705 | INIT_LIST_HEAD(list: &phba->lpfc_scsi_buf_list_put); |
7706 | |
7707 | /* Initialize the fabric iocb list */ |
7708 | INIT_LIST_HEAD(list: &phba->fabric_iocb_list); |
7709 | |
7710 | /* Initialize list to save ELS buffers */ |
7711 | INIT_LIST_HEAD(list: &phba->elsbuf); |
7712 | |
7713 | /* Initialize FCF connection rec list */ |
7714 | INIT_LIST_HEAD(list: &phba->fcf_conn_rec_list); |
7715 | |
7716 | /* Initialize OAS configuration list */ |
7717 | spin_lock_init(&phba->devicelock); |
7718 | INIT_LIST_HEAD(list: &phba->luns); |
7719 | |
7720 | /* MBOX heartbeat timer */ |
7721 | timer_setup(&psli->mbox_tmo, lpfc_mbox_timeout, 0); |
7722 | /* Fabric block timer */ |
7723 | timer_setup(&phba->fabric_block_timer, lpfc_fabric_block_timeout, 0); |
7724 | /* EA polling mode timer */ |
7725 | timer_setup(&phba->eratt_poll, lpfc_poll_eratt, 0); |
7726 | /* Heartbeat timer */ |
7727 | timer_setup(&phba->hb_tmofunc, lpfc_hb_timeout, 0); |
7728 | |
7729 | INIT_DELAYED_WORK(&phba->eq_delay_work, lpfc_hb_eq_delay_work); |
7730 | |
7731 | INIT_DELAYED_WORK(&phba->idle_stat_delay_work, |
7732 | lpfc_idle_stat_delay_work); |
7733 | INIT_WORK(&phba->unblock_request_work, lpfc_unblock_requests_work); |
7734 | return 0; |
7735 | } |
7736 | |
7737 | /** |
7738 | * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev |
7739 | * @phba: pointer to lpfc hba data structure. |
7740 | * |
7741 | * This routine is invoked to set up the driver internal resources specific to |
7742 | * support the SLI-3 HBA device it attached to. |
7743 | * |
7744 | * Return codes |
7745 | * 0 - successful |
7746 | * other values - error |
7747 | **/ |
7748 | static int |
7749 | lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) |
7750 | { |
7751 | int rc, entry_sz; |
7752 | |
7753 | /* |
7754 | * Initialize timers used by driver |
7755 | */ |
7756 | |
7757 | /* FCP polling mode timer */ |
7758 | timer_setup(&phba->fcp_poll_timer, lpfc_poll_timeout, 0); |
7759 | |
7760 | /* Host attention work mask setup */ |
7761 | phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT); |
7762 | phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4)); |
7763 | |
7764 | /* Get all the module params for configuring this host */ |
7765 | lpfc_get_cfgparam(phba); |
7766 | /* Set up phase-1 common device driver resources */ |
7767 | |
7768 | rc = lpfc_setup_driver_resource_phase1(phba); |
7769 | if (rc) |
7770 | return -ENODEV; |
7771 | |
7772 | if (!phba->sli.sli3_ring) |
7773 | phba->sli.sli3_ring = kcalloc(LPFC_SLI3_MAX_RING, |
7774 | size: sizeof(struct lpfc_sli_ring), |
7775 | GFP_KERNEL); |
7776 | if (!phba->sli.sli3_ring) |
7777 | return -ENOMEM; |
7778 | |
7779 | /* |
7780 | * Since lpfc_sg_seg_cnt is module parameter, the sg_dma_buf_size |
7781 | * used to create the sg_dma_buf_pool must be dynamically calculated. |
7782 | */ |
7783 | |
7784 | if (phba->sli_rev == LPFC_SLI_REV4) |
7785 | entry_sz = sizeof(struct sli4_sge); |
7786 | else |
7787 | entry_sz = sizeof(struct ulp_bde64); |
7788 | |
7789 | /* There are going to be 2 reserved BDEs: 1 FCP cmnd + 1 FCP rsp */ |
7790 | if (phba->cfg_enable_bg) { |
7791 | /* |
7792 | * The scsi_buf for a T10-DIF I/O will hold the FCP cmnd, |
7793 | * the FCP rsp, and a BDE for each. Sice we have no control |
7794 | * over how many protection data segments the SCSI Layer |
7795 | * will hand us (ie: there could be one for every block |
7796 | * in the IO), we just allocate enough BDEs to accomidate |
7797 | * our max amount and we need to limit lpfc_sg_seg_cnt to |
7798 | * minimize the risk of running out. |
7799 | */ |
7800 | phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + |
7801 | sizeof(struct fcp_rsp) + |
7802 | (LPFC_MAX_SG_SEG_CNT * entry_sz); |
7803 | |
7804 | if (phba->cfg_sg_seg_cnt > LPFC_MAX_SG_SEG_CNT_DIF) |
7805 | phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT_DIF; |
7806 | |
7807 | /* Total BDEs in BPL for scsi_sg_list and scsi_sg_prot_list */ |
7808 | phba->cfg_total_seg_cnt = LPFC_MAX_SG_SEG_CNT; |
7809 | } else { |
7810 | /* |
7811 | * The scsi_buf for a regular I/O will hold the FCP cmnd, |
7812 | * the FCP rsp, a BDE for each, and a BDE for up to |
7813 | * cfg_sg_seg_cnt data segments. |
7814 | */ |
7815 | phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + |
7816 | sizeof(struct fcp_rsp) + |
7817 | ((phba->cfg_sg_seg_cnt + 2) * entry_sz); |
7818 | |
7819 | /* Total BDEs in BPL for scsi_sg_list */ |
7820 | phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + 2; |
7821 | } |
7822 | |
7823 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP, |
7824 | "9088 INIT sg_tablesize:%d dmabuf_size:%d total_bde:%d\n" , |
7825 | phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size, |
7826 | phba->cfg_total_seg_cnt); |
7827 | |
7828 | phba->max_vpi = LPFC_MAX_VPI; |
7829 | /* This will be set to correct value after config_port mbox */ |
7830 | phba->max_vports = 0; |
7831 | |
7832 | /* |
7833 | * Initialize the SLI Layer to run with lpfc HBAs. |
7834 | */ |
7835 | lpfc_sli_setup(phba); |
7836 | lpfc_sli_queue_init(phba); |
7837 | |
7838 | /* Allocate device driver memory */ |
7839 | if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ)) |
7840 | return -ENOMEM; |
7841 | |
7842 | phba->lpfc_sg_dma_buf_pool = |
7843 | dma_pool_create(name: "lpfc_sg_dma_buf_pool" , |
7844 | dev: &phba->pcidev->dev, size: phba->cfg_sg_dma_buf_size, |
7845 | BPL_ALIGN_SZ, allocation: 0); |
7846 | |
7847 | if (!phba->lpfc_sg_dma_buf_pool) |
7848 | goto fail_free_mem; |
7849 | |
7850 | phba->lpfc_cmd_rsp_buf_pool = |
7851 | dma_pool_create(name: "lpfc_cmd_rsp_buf_pool" , |
7852 | dev: &phba->pcidev->dev, |
7853 | size: sizeof(struct fcp_cmnd) + |
7854 | sizeof(struct fcp_rsp), |
7855 | BPL_ALIGN_SZ, allocation: 0); |
7856 | |
7857 | if (!phba->lpfc_cmd_rsp_buf_pool) |
7858 | goto fail_free_dma_buf_pool; |
7859 | |
7860 | /* |
7861 | * Enable sr-iov virtual functions if supported and configured |
7862 | * through the module parameter. |
7863 | */ |
7864 | if (phba->cfg_sriov_nr_virtfn > 0) { |
7865 | rc = lpfc_sli_probe_sriov_nr_virtfn(phba, |
7866 | nr_vfn: phba->cfg_sriov_nr_virtfn); |
7867 | if (rc) { |
7868 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
7869 | "2808 Requested number of SR-IOV " |
7870 | "virtual functions (%d) is not " |
7871 | "supported\n" , |
7872 | phba->cfg_sriov_nr_virtfn); |
7873 | phba->cfg_sriov_nr_virtfn = 0; |
7874 | } |
7875 | } |
7876 | |
7877 | return 0; |
7878 | |
7879 | fail_free_dma_buf_pool: |
7880 | dma_pool_destroy(pool: phba->lpfc_sg_dma_buf_pool); |
7881 | phba->lpfc_sg_dma_buf_pool = NULL; |
7882 | fail_free_mem: |
7883 | lpfc_mem_free(phba); |
7884 | return -ENOMEM; |
7885 | } |
7886 | |
7887 | /** |
7888 | * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev |
7889 | * @phba: pointer to lpfc hba data structure. |
7890 | * |
7891 | * This routine is invoked to unset the driver internal resources set up |
7892 | * specific for supporting the SLI-3 HBA device it attached to. |
7893 | **/ |
7894 | static void |
7895 | lpfc_sli_driver_resource_unset(struct lpfc_hba *phba) |
7896 | { |
7897 | /* Free device driver memory allocated */ |
7898 | lpfc_mem_free_all(phba); |
7899 | |
7900 | return; |
7901 | } |
7902 | |
7903 | /** |
7904 | * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev |
7905 | * @phba: pointer to lpfc hba data structure. |
7906 | * |
7907 | * This routine is invoked to set up the driver internal resources specific to |
7908 | * support the SLI-4 HBA device it attached to. |
7909 | * |
7910 | * Return codes |
7911 | * 0 - successful |
7912 | * other values - error |
7913 | **/ |
7914 | static int |
7915 | lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) |
7916 | { |
7917 | LPFC_MBOXQ_t *mboxq; |
7918 | MAILBOX_t *mb; |
7919 | int rc, i, max_buf_size; |
7920 | int longs; |
7921 | int ; |
7922 | uint64_t wwn; |
7923 | u32 if_type; |
7924 | u32 if_fam; |
7925 | |
7926 | phba->sli4_hba.num_present_cpu = lpfc_present_cpu; |
7927 | phba->sli4_hba.num_possible_cpu = cpumask_last(cpu_possible_mask) + 1; |
7928 | phba->sli4_hba.curr_disp_cpu = 0; |
7929 | |
7930 | /* Get all the module params for configuring this host */ |
7931 | lpfc_get_cfgparam(phba); |
7932 | |
7933 | /* Set up phase-1 common device driver resources */ |
7934 | rc = lpfc_setup_driver_resource_phase1(phba); |
7935 | if (rc) |
7936 | return -ENODEV; |
7937 | |
7938 | /* Before proceed, wait for POST done and device ready */ |
7939 | rc = lpfc_sli4_post_status_check(phba); |
7940 | if (rc) |
7941 | return -ENODEV; |
7942 | |
7943 | /* Allocate all driver workqueues here */ |
7944 | |
7945 | /* The lpfc_wq workqueue for deferred irq use */ |
7946 | phba->wq = alloc_workqueue(fmt: "lpfc_wq" , flags: WQ_MEM_RECLAIM, max_active: 0); |
7947 | if (!phba->wq) |
7948 | return -ENOMEM; |
7949 | |
7950 | /* |
7951 | * Initialize timers used by driver |
7952 | */ |
7953 | |
7954 | timer_setup(&phba->rrq_tmr, lpfc_rrq_timeout, 0); |
7955 | |
7956 | /* FCF rediscover timer */ |
7957 | timer_setup(&phba->fcf.redisc_wait, lpfc_sli4_fcf_redisc_wait_tmo, 0); |
7958 | |
7959 | /* CMF congestion timer */ |
7960 | hrtimer_init(timer: &phba->cmf_timer, CLOCK_MONOTONIC, mode: HRTIMER_MODE_REL); |
7961 | phba->cmf_timer.function = lpfc_cmf_timer; |
7962 | /* CMF 1 minute stats collection timer */ |
7963 | hrtimer_init(timer: &phba->cmf_stats_timer, CLOCK_MONOTONIC, mode: HRTIMER_MODE_REL); |
7964 | phba->cmf_stats_timer.function = lpfc_cmf_stats_timer; |
7965 | |
7966 | /* |
7967 | * Control structure for handling external multi-buffer mailbox |
7968 | * command pass-through. |
7969 | */ |
7970 | memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0, |
7971 | sizeof(struct lpfc_mbox_ext_buf_ctx)); |
7972 | INIT_LIST_HEAD(list: &phba->mbox_ext_buf_ctx.ext_dmabuf_list); |
7973 | |
7974 | phba->max_vpi = LPFC_MAX_VPI; |
7975 | |
7976 | /* This will be set to correct value after the read_config mbox */ |
7977 | phba->max_vports = 0; |
7978 | |
7979 | /* Program the default value of vlan_id and fc_map */ |
7980 | phba->valid_vlan = 0; |
7981 | phba->fc_map[0] = LPFC_FCOE_FCF_MAP0; |
7982 | phba->fc_map[1] = LPFC_FCOE_FCF_MAP1; |
7983 | phba->fc_map[2] = LPFC_FCOE_FCF_MAP2; |
7984 | |
7985 | /* |
7986 | * For SLI4, instead of using ring 0 (LPFC_FCP_RING) for FCP commands |
7987 | * we will associate a new ring, for each EQ/CQ/WQ tuple. |
7988 | * The WQ create will allocate the ring. |
7989 | */ |
7990 | |
7991 | /* Initialize buffer queue management fields */ |
7992 | INIT_LIST_HEAD(list: &phba->hbqs[LPFC_ELS_HBQ].hbq_buffer_list); |
7993 | phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc; |
7994 | phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free; |
7995 | |
7996 | /* for VMID idle timeout if VMID is enabled */ |
7997 | if (lpfc_is_vmid_enabled(phba)) |
7998 | timer_setup(&phba->inactive_vmid_poll, lpfc_vmid_poll, 0); |
7999 | |
8000 | /* |
8001 | * Initialize the SLI Layer to run with lpfc SLI4 HBAs. |
8002 | */ |
8003 | /* Initialize the Abort buffer list used by driver */ |
8004 | spin_lock_init(&phba->sli4_hba.abts_io_buf_list_lock); |
8005 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_abts_io_buf_list); |
8006 | |
8007 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
8008 | /* Initialize the Abort nvme buffer list used by driver */ |
8009 | spin_lock_init(&phba->sli4_hba.abts_nvmet_buf_list_lock); |
8010 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_abts_nvmet_ctx_list); |
8011 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_nvmet_io_wait_list); |
8012 | spin_lock_init(&phba->sli4_hba.t_active_list_lock); |
8013 | INIT_LIST_HEAD(list: &phba->sli4_hba.t_active_ctx_list); |
8014 | } |
8015 | |
8016 | /* This abort list used by worker thread */ |
8017 | spin_lock_init(&phba->sli4_hba.sgl_list_lock); |
8018 | spin_lock_init(&phba->sli4_hba.nvmet_io_wait_lock); |
8019 | spin_lock_init(&phba->sli4_hba.asynce_list_lock); |
8020 | spin_lock_init(&phba->sli4_hba.els_xri_abrt_list_lock); |
8021 | |
8022 | /* |
8023 | * Initialize driver internal slow-path work queues |
8024 | */ |
8025 | |
8026 | /* Driver internel slow-path CQ Event pool */ |
8027 | INIT_LIST_HEAD(list: &phba->sli4_hba.sp_cqe_event_pool); |
8028 | /* Response IOCB work queue list */ |
8029 | INIT_LIST_HEAD(list: &phba->sli4_hba.sp_queue_event); |
8030 | /* Asynchronous event CQ Event work queue list */ |
8031 | INIT_LIST_HEAD(list: &phba->sli4_hba.sp_asynce_work_queue); |
8032 | /* Slow-path XRI aborted CQ Event work queue list */ |
8033 | INIT_LIST_HEAD(list: &phba->sli4_hba.sp_els_xri_aborted_work_queue); |
8034 | /* Receive queue CQ Event work queue list */ |
8035 | INIT_LIST_HEAD(list: &phba->sli4_hba.sp_unsol_work_queue); |
8036 | |
8037 | /* Initialize extent block lists. */ |
8038 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_rpi_blk_list); |
8039 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_xri_blk_list); |
8040 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_vfi_blk_list); |
8041 | INIT_LIST_HEAD(list: &phba->lpfc_vpi_blk_list); |
8042 | |
8043 | /* Initialize mboxq lists. If the early init routines fail |
8044 | * these lists need to be correctly initialized. |
8045 | */ |
8046 | INIT_LIST_HEAD(list: &phba->sli.mboxq); |
8047 | INIT_LIST_HEAD(list: &phba->sli.mboxq_cmpl); |
8048 | |
8049 | /* initialize optic_state to 0xFF */ |
8050 | phba->sli4_hba.lnk_info.optic_state = 0xff; |
8051 | |
8052 | /* Allocate device driver memory */ |
8053 | rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ); |
8054 | if (rc) |
8055 | goto out_destroy_workqueue; |
8056 | |
8057 | /* IF Type 2 ports get initialized now. */ |
8058 | if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) >= |
8059 | LPFC_SLI_INTF_IF_TYPE_2) { |
8060 | rc = lpfc_pci_function_reset(phba); |
8061 | if (unlikely(rc)) { |
8062 | rc = -ENODEV; |
8063 | goto out_free_mem; |
8064 | } |
8065 | phba->temp_sensor_support = 1; |
8066 | } |
8067 | |
8068 | /* Create the bootstrap mailbox command */ |
8069 | rc = lpfc_create_bootstrap_mbox(phba); |
8070 | if (unlikely(rc)) |
8071 | goto out_free_mem; |
8072 | |
8073 | /* Set up the host's endian order with the device. */ |
8074 | rc = lpfc_setup_endian_order(phba); |
8075 | if (unlikely(rc)) |
8076 | goto out_free_bsmbx; |
8077 | |
8078 | /* Set up the hba's configuration parameters. */ |
8079 | rc = lpfc_sli4_read_config(phba); |
8080 | if (unlikely(rc)) |
8081 | goto out_free_bsmbx; |
8082 | |
8083 | if (phba->sli4_hba.fawwpn_flag & LPFC_FAWWPN_CONFIG) { |
8084 | /* Right now the link is down, if FA-PWWN is configured the |
8085 | * firmware will try FLOGI before the driver gets a link up. |
8086 | * If it fails, the driver should get a MISCONFIGURED async |
8087 | * event which will clear this flag. The only notification |
8088 | * the driver gets is if it fails, if it succeeds there is no |
8089 | * notification given. Assume success. |
8090 | */ |
8091 | phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_FABRIC; |
8092 | } |
8093 | |
8094 | rc = lpfc_mem_alloc_active_rrq_pool_s4(phba); |
8095 | if (unlikely(rc)) |
8096 | goto out_free_bsmbx; |
8097 | |
8098 | /* IF Type 0 ports get initialized now. */ |
8099 | if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == |
8100 | LPFC_SLI_INTF_IF_TYPE_0) { |
8101 | rc = lpfc_pci_function_reset(phba); |
8102 | if (unlikely(rc)) |
8103 | goto out_free_bsmbx; |
8104 | } |
8105 | |
8106 | mboxq = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, |
8107 | GFP_KERNEL); |
8108 | if (!mboxq) { |
8109 | rc = -ENOMEM; |
8110 | goto out_free_bsmbx; |
8111 | } |
8112 | |
8113 | /* Check for NVMET being configured */ |
8114 | phba->nvmet_support = 0; |
8115 | if (lpfc_enable_nvmet_cnt) { |
8116 | |
8117 | /* First get WWN of HBA instance */ |
8118 | lpfc_read_nv(phba, mboxq); |
8119 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
8120 | if (rc != MBX_SUCCESS) { |
8121 | lpfc_printf_log(phba, KERN_ERR, |
8122 | LOG_TRACE_EVENT, |
8123 | "6016 Mailbox failed , mbxCmd x%x " |
8124 | "READ_NV, mbxStatus x%x\n" , |
8125 | bf_get(lpfc_mqe_command, &mboxq->u.mqe), |
8126 | bf_get(lpfc_mqe_status, &mboxq->u.mqe)); |
8127 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
8128 | rc = -EIO; |
8129 | goto out_free_bsmbx; |
8130 | } |
8131 | mb = &mboxq->u.mb; |
8132 | memcpy(&wwn, (char *)mb->un.varRDnvp.nodename, |
8133 | sizeof(uint64_t)); |
8134 | wwn = cpu_to_be64(wwn); |
8135 | phba->sli4_hba.wwnn.u.name = wwn; |
8136 | memcpy(&wwn, (char *)mb->un.varRDnvp.portname, |
8137 | sizeof(uint64_t)); |
8138 | /* wwn is WWPN of HBA instance */ |
8139 | wwn = cpu_to_be64(wwn); |
8140 | phba->sli4_hba.wwpn.u.name = wwn; |
8141 | |
8142 | /* Check to see if it matches any module parameter */ |
8143 | for (i = 0; i < lpfc_enable_nvmet_cnt; i++) { |
8144 | if (wwn == lpfc_enable_nvmet[i]) { |
8145 | #if (IS_ENABLED(CONFIG_NVME_TARGET_FC)) |
8146 | if (lpfc_nvmet_mem_alloc(phba)) |
8147 | break; |
8148 | |
8149 | phba->nvmet_support = 1; /* a match */ |
8150 | |
8151 | lpfc_printf_log(phba, KERN_ERR, |
8152 | LOG_TRACE_EVENT, |
8153 | "6017 NVME Target %016llx\n" , |
8154 | wwn); |
8155 | #else |
8156 | lpfc_printf_log(phba, KERN_ERR, |
8157 | LOG_TRACE_EVENT, |
8158 | "6021 Can't enable NVME Target." |
8159 | " NVME_TARGET_FC infrastructure" |
8160 | " is not in kernel\n" ); |
8161 | #endif |
8162 | /* Not supported for NVMET */ |
8163 | phba->cfg_xri_rebalancing = 0; |
8164 | if (phba->irq_chann_mode == NHT_MODE) { |
8165 | phba->cfg_irq_chann = |
8166 | phba->sli4_hba.num_present_cpu; |
8167 | phba->cfg_hdw_queue = |
8168 | phba->sli4_hba.num_present_cpu; |
8169 | phba->irq_chann_mode = NORMAL_MODE; |
8170 | } |
8171 | break; |
8172 | } |
8173 | } |
8174 | } |
8175 | |
8176 | lpfc_nvme_mod_param_dep(phba); |
8177 | |
8178 | /* |
8179 | * Get sli4 parameters that override parameters from Port capabilities. |
8180 | * If this call fails, it isn't critical unless the SLI4 parameters come |
8181 | * back in conflict. |
8182 | */ |
8183 | rc = lpfc_get_sli4_parameters(phba, mboxq); |
8184 | if (rc) { |
8185 | if_type = bf_get(lpfc_sli_intf_if_type, |
8186 | &phba->sli4_hba.sli_intf); |
8187 | if_fam = bf_get(lpfc_sli_intf_sli_family, |
8188 | &phba->sli4_hba.sli_intf); |
8189 | if (phba->sli4_hba.extents_in_use && |
8190 | phba->sli4_hba.rpi_hdrs_in_use) { |
8191 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8192 | "2999 Unsupported SLI4 Parameters " |
8193 | "Extents and RPI headers enabled.\n" ); |
8194 | if (if_type == LPFC_SLI_INTF_IF_TYPE_0 && |
8195 | if_fam == LPFC_SLI_INTF_FAMILY_BE2) { |
8196 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
8197 | rc = -EIO; |
8198 | goto out_free_bsmbx; |
8199 | } |
8200 | } |
8201 | if (!(if_type == LPFC_SLI_INTF_IF_TYPE_0 && |
8202 | if_fam == LPFC_SLI_INTF_FAMILY_BE2)) { |
8203 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
8204 | rc = -EIO; |
8205 | goto out_free_bsmbx; |
8206 | } |
8207 | } |
8208 | |
8209 | /* |
8210 | * 1 for cmd, 1 for rsp, NVME adds an extra one |
8211 | * for boundary conditions in its max_sgl_segment template. |
8212 | */ |
8213 | extra = 2; |
8214 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
8215 | extra++; |
8216 | |
8217 | /* |
8218 | * It doesn't matter what family our adapter is in, we are |
8219 | * limited to 2 Pages, 512 SGEs, for our SGL. |
8220 | * There are going to be 2 reserved SGEs: 1 FCP cmnd + 1 FCP rsp |
8221 | */ |
8222 | max_buf_size = (2 * SLI4_PAGE_SIZE); |
8223 | |
8224 | /* |
8225 | * Since lpfc_sg_seg_cnt is module param, the sg_dma_buf_size |
8226 | * used to create the sg_dma_buf_pool must be calculated. |
8227 | */ |
8228 | if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) { |
8229 | /* Both cfg_enable_bg and cfg_external_dif code paths */ |
8230 | |
8231 | /* |
8232 | * The scsi_buf for a T10-DIF I/O holds the FCP cmnd, |
8233 | * the FCP rsp, and a SGE. Sice we have no control |
8234 | * over how many protection segments the SCSI Layer |
8235 | * will hand us (ie: there could be one for every block |
8236 | * in the IO), just allocate enough SGEs to accomidate |
8237 | * our max amount and we need to limit lpfc_sg_seg_cnt |
8238 | * to minimize the risk of running out. |
8239 | */ |
8240 | phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + |
8241 | sizeof(struct fcp_rsp) + max_buf_size; |
8242 | |
8243 | /* Total SGEs for scsi_sg_list and scsi_sg_prot_list */ |
8244 | phba->cfg_total_seg_cnt = LPFC_MAX_SGL_SEG_CNT; |
8245 | |
8246 | /* |
8247 | * If supporting DIF, reduce the seg count for scsi to |
8248 | * allow room for the DIF sges. |
8249 | */ |
8250 | if (phba->cfg_enable_bg && |
8251 | phba->cfg_sg_seg_cnt > LPFC_MAX_BG_SLI4_SEG_CNT_DIF) |
8252 | phba->cfg_scsi_seg_cnt = LPFC_MAX_BG_SLI4_SEG_CNT_DIF; |
8253 | else |
8254 | phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt; |
8255 | |
8256 | } else { |
8257 | /* |
8258 | * The scsi_buf for a regular I/O holds the FCP cmnd, |
8259 | * the FCP rsp, a SGE for each, and a SGE for up to |
8260 | * cfg_sg_seg_cnt data segments. |
8261 | */ |
8262 | phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) + |
8263 | sizeof(struct fcp_rsp) + |
8264 | ((phba->cfg_sg_seg_cnt + extra) * |
8265 | sizeof(struct sli4_sge)); |
8266 | |
8267 | /* Total SGEs for scsi_sg_list */ |
8268 | phba->cfg_total_seg_cnt = phba->cfg_sg_seg_cnt + extra; |
8269 | phba->cfg_scsi_seg_cnt = phba->cfg_sg_seg_cnt; |
8270 | |
8271 | /* |
8272 | * NOTE: if (phba->cfg_sg_seg_cnt + extra) <= 256 we only |
8273 | * need to post 1 page for the SGL. |
8274 | */ |
8275 | } |
8276 | |
8277 | if (phba->cfg_xpsgl && !phba->nvmet_support) |
8278 | phba->cfg_sg_dma_buf_size = LPFC_DEFAULT_XPSGL_SIZE; |
8279 | else if (phba->cfg_sg_dma_buf_size <= LPFC_MIN_SG_SLI4_BUF_SZ) |
8280 | phba->cfg_sg_dma_buf_size = LPFC_MIN_SG_SLI4_BUF_SZ; |
8281 | else |
8282 | phba->cfg_sg_dma_buf_size = |
8283 | SLI4_PAGE_ALIGN(phba->cfg_sg_dma_buf_size); |
8284 | |
8285 | phba->border_sge_num = phba->cfg_sg_dma_buf_size / |
8286 | sizeof(struct sli4_sge); |
8287 | |
8288 | /* Limit to LPFC_MAX_NVME_SEG_CNT for NVME. */ |
8289 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
8290 | if (phba->cfg_sg_seg_cnt > LPFC_MAX_NVME_SEG_CNT) { |
8291 | lpfc_printf_log(phba, KERN_INFO, LOG_NVME | LOG_INIT, |
8292 | "6300 Reducing NVME sg segment " |
8293 | "cnt to %d\n" , |
8294 | LPFC_MAX_NVME_SEG_CNT); |
8295 | phba->cfg_nvme_seg_cnt = LPFC_MAX_NVME_SEG_CNT; |
8296 | } else |
8297 | phba->cfg_nvme_seg_cnt = phba->cfg_sg_seg_cnt; |
8298 | } |
8299 | |
8300 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_FCP, |
8301 | "9087 sg_seg_cnt:%d dmabuf_size:%d " |
8302 | "total:%d scsi:%d nvme:%d\n" , |
8303 | phba->cfg_sg_seg_cnt, phba->cfg_sg_dma_buf_size, |
8304 | phba->cfg_total_seg_cnt, phba->cfg_scsi_seg_cnt, |
8305 | phba->cfg_nvme_seg_cnt); |
8306 | |
8307 | if (phba->cfg_sg_dma_buf_size < SLI4_PAGE_SIZE) |
8308 | i = phba->cfg_sg_dma_buf_size; |
8309 | else |
8310 | i = SLI4_PAGE_SIZE; |
8311 | |
8312 | phba->lpfc_sg_dma_buf_pool = |
8313 | dma_pool_create(name: "lpfc_sg_dma_buf_pool" , |
8314 | dev: &phba->pcidev->dev, |
8315 | size: phba->cfg_sg_dma_buf_size, |
8316 | align: i, allocation: 0); |
8317 | if (!phba->lpfc_sg_dma_buf_pool) { |
8318 | rc = -ENOMEM; |
8319 | goto out_free_bsmbx; |
8320 | } |
8321 | |
8322 | phba->lpfc_cmd_rsp_buf_pool = |
8323 | dma_pool_create(name: "lpfc_cmd_rsp_buf_pool" , |
8324 | dev: &phba->pcidev->dev, |
8325 | size: sizeof(struct fcp_cmnd) + |
8326 | sizeof(struct fcp_rsp), |
8327 | align: i, allocation: 0); |
8328 | if (!phba->lpfc_cmd_rsp_buf_pool) { |
8329 | rc = -ENOMEM; |
8330 | goto out_free_sg_dma_buf; |
8331 | } |
8332 | |
8333 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
8334 | |
8335 | /* Verify OAS is supported */ |
8336 | lpfc_sli4_oas_verify(phba); |
8337 | |
8338 | /* Verify RAS support on adapter */ |
8339 | lpfc_sli4_ras_init(phba); |
8340 | |
8341 | /* Verify all the SLI4 queues */ |
8342 | rc = lpfc_sli4_queue_verify(phba); |
8343 | if (rc) |
8344 | goto out_free_cmd_rsp_buf; |
8345 | |
8346 | /* Create driver internal CQE event pool */ |
8347 | rc = lpfc_sli4_cq_event_pool_create(phba); |
8348 | if (rc) |
8349 | goto out_free_cmd_rsp_buf; |
8350 | |
8351 | /* Initialize sgl lists per host */ |
8352 | lpfc_init_sgl_list(phba); |
8353 | |
8354 | /* Allocate and initialize active sgl array */ |
8355 | rc = lpfc_init_active_sgl_array(phba); |
8356 | if (rc) { |
8357 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8358 | "1430 Failed to initialize sgl list.\n" ); |
8359 | goto out_destroy_cq_event_pool; |
8360 | } |
8361 | rc = lpfc_sli4_init_rpi_hdrs(phba); |
8362 | if (rc) { |
8363 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8364 | "1432 Failed to initialize rpi headers.\n" ); |
8365 | goto out_free_active_sgl; |
8366 | } |
8367 | |
8368 | /* Allocate eligible FCF bmask memory for FCF roundrobin failover */ |
8369 | longs = (LPFC_SLI4_FCF_TBL_INDX_MAX + BITS_PER_LONG - 1)/BITS_PER_LONG; |
8370 | phba->fcf.fcf_rr_bmask = kcalloc(n: longs, size: sizeof(unsigned long), |
8371 | GFP_KERNEL); |
8372 | if (!phba->fcf.fcf_rr_bmask) { |
8373 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8374 | "2759 Failed allocate memory for FCF round " |
8375 | "robin failover bmask\n" ); |
8376 | rc = -ENOMEM; |
8377 | goto out_remove_rpi_hdrs; |
8378 | } |
8379 | |
8380 | phba->sli4_hba.hba_eq_hdl = kcalloc(n: phba->cfg_irq_chann, |
8381 | size: sizeof(struct lpfc_hba_eq_hdl), |
8382 | GFP_KERNEL); |
8383 | if (!phba->sli4_hba.hba_eq_hdl) { |
8384 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8385 | "2572 Failed allocate memory for " |
8386 | "fast-path per-EQ handle array\n" ); |
8387 | rc = -ENOMEM; |
8388 | goto out_free_fcf_rr_bmask; |
8389 | } |
8390 | |
8391 | phba->sli4_hba.cpu_map = kcalloc(n: phba->sli4_hba.num_possible_cpu, |
8392 | size: sizeof(struct lpfc_vector_map_info), |
8393 | GFP_KERNEL); |
8394 | if (!phba->sli4_hba.cpu_map) { |
8395 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8396 | "3327 Failed allocate memory for msi-x " |
8397 | "interrupt vector mapping\n" ); |
8398 | rc = -ENOMEM; |
8399 | goto out_free_hba_eq_hdl; |
8400 | } |
8401 | |
8402 | phba->sli4_hba.eq_info = alloc_percpu(struct lpfc_eq_intr_info); |
8403 | if (!phba->sli4_hba.eq_info) { |
8404 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8405 | "3321 Failed allocation for per_cpu stats\n" ); |
8406 | rc = -ENOMEM; |
8407 | goto out_free_hba_cpu_map; |
8408 | } |
8409 | |
8410 | phba->sli4_hba.idle_stat = kcalloc(n: phba->sli4_hba.num_possible_cpu, |
8411 | size: sizeof(*phba->sli4_hba.idle_stat), |
8412 | GFP_KERNEL); |
8413 | if (!phba->sli4_hba.idle_stat) { |
8414 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8415 | "3390 Failed allocation for idle_stat\n" ); |
8416 | rc = -ENOMEM; |
8417 | goto out_free_hba_eq_info; |
8418 | } |
8419 | |
8420 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
8421 | phba->sli4_hba.c_stat = alloc_percpu(struct lpfc_hdwq_stat); |
8422 | if (!phba->sli4_hba.c_stat) { |
8423 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8424 | "3332 Failed allocating per cpu hdwq stats\n" ); |
8425 | rc = -ENOMEM; |
8426 | goto out_free_hba_idle_stat; |
8427 | } |
8428 | #endif |
8429 | |
8430 | phba->cmf_stat = alloc_percpu(struct lpfc_cgn_stat); |
8431 | if (!phba->cmf_stat) { |
8432 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8433 | "3331 Failed allocating per cpu cgn stats\n" ); |
8434 | rc = -ENOMEM; |
8435 | goto out_free_hba_hdwq_info; |
8436 | } |
8437 | |
8438 | /* |
8439 | * Enable sr-iov virtual functions if supported and configured |
8440 | * through the module parameter. |
8441 | */ |
8442 | if (phba->cfg_sriov_nr_virtfn > 0) { |
8443 | rc = lpfc_sli_probe_sriov_nr_virtfn(phba, |
8444 | nr_vfn: phba->cfg_sriov_nr_virtfn); |
8445 | if (rc) { |
8446 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
8447 | "3020 Requested number of SR-IOV " |
8448 | "virtual functions (%d) is not " |
8449 | "supported\n" , |
8450 | phba->cfg_sriov_nr_virtfn); |
8451 | phba->cfg_sriov_nr_virtfn = 0; |
8452 | } |
8453 | } |
8454 | |
8455 | return 0; |
8456 | |
8457 | out_free_hba_hdwq_info: |
8458 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
8459 | free_percpu(pdata: phba->sli4_hba.c_stat); |
8460 | out_free_hba_idle_stat: |
8461 | #endif |
8462 | kfree(objp: phba->sli4_hba.idle_stat); |
8463 | out_free_hba_eq_info: |
8464 | free_percpu(pdata: phba->sli4_hba.eq_info); |
8465 | out_free_hba_cpu_map: |
8466 | kfree(objp: phba->sli4_hba.cpu_map); |
8467 | out_free_hba_eq_hdl: |
8468 | kfree(objp: phba->sli4_hba.hba_eq_hdl); |
8469 | out_free_fcf_rr_bmask: |
8470 | kfree(objp: phba->fcf.fcf_rr_bmask); |
8471 | out_remove_rpi_hdrs: |
8472 | lpfc_sli4_remove_rpi_hdrs(phba); |
8473 | out_free_active_sgl: |
8474 | lpfc_free_active_sgl(phba); |
8475 | out_destroy_cq_event_pool: |
8476 | lpfc_sli4_cq_event_pool_destroy(phba); |
8477 | out_free_cmd_rsp_buf: |
8478 | dma_pool_destroy(pool: phba->lpfc_cmd_rsp_buf_pool); |
8479 | phba->lpfc_cmd_rsp_buf_pool = NULL; |
8480 | out_free_sg_dma_buf: |
8481 | dma_pool_destroy(pool: phba->lpfc_sg_dma_buf_pool); |
8482 | phba->lpfc_sg_dma_buf_pool = NULL; |
8483 | out_free_bsmbx: |
8484 | lpfc_destroy_bootstrap_mbox(phba); |
8485 | out_free_mem: |
8486 | lpfc_mem_free(phba); |
8487 | out_destroy_workqueue: |
8488 | destroy_workqueue(wq: phba->wq); |
8489 | phba->wq = NULL; |
8490 | return rc; |
8491 | } |
8492 | |
8493 | /** |
8494 | * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev |
8495 | * @phba: pointer to lpfc hba data structure. |
8496 | * |
8497 | * This routine is invoked to unset the driver internal resources set up |
8498 | * specific for supporting the SLI-4 HBA device it attached to. |
8499 | **/ |
8500 | static void |
8501 | lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba) |
8502 | { |
8503 | struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry; |
8504 | |
8505 | free_percpu(pdata: phba->sli4_hba.eq_info); |
8506 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
8507 | free_percpu(pdata: phba->sli4_hba.c_stat); |
8508 | #endif |
8509 | free_percpu(pdata: phba->cmf_stat); |
8510 | kfree(objp: phba->sli4_hba.idle_stat); |
8511 | |
8512 | /* Free memory allocated for msi-x interrupt vector to CPU mapping */ |
8513 | kfree(objp: phba->sli4_hba.cpu_map); |
8514 | phba->sli4_hba.num_possible_cpu = 0; |
8515 | phba->sli4_hba.num_present_cpu = 0; |
8516 | phba->sli4_hba.curr_disp_cpu = 0; |
8517 | cpumask_clear(dstp: &phba->sli4_hba.irq_aff_mask); |
8518 | |
8519 | /* Free memory allocated for fast-path work queue handles */ |
8520 | kfree(objp: phba->sli4_hba.hba_eq_hdl); |
8521 | |
8522 | /* Free the allocated rpi headers. */ |
8523 | lpfc_sli4_remove_rpi_hdrs(phba); |
8524 | lpfc_sli4_remove_rpis(phba); |
8525 | |
8526 | /* Free eligible FCF index bmask */ |
8527 | kfree(objp: phba->fcf.fcf_rr_bmask); |
8528 | |
8529 | /* Free the ELS sgl list */ |
8530 | lpfc_free_active_sgl(phba); |
8531 | lpfc_free_els_sgl_list(phba); |
8532 | lpfc_free_nvmet_sgl_list(phba); |
8533 | |
8534 | /* Free the completion queue EQ event pool */ |
8535 | lpfc_sli4_cq_event_release_all(phba); |
8536 | lpfc_sli4_cq_event_pool_destroy(phba); |
8537 | |
8538 | /* Release resource identifiers. */ |
8539 | lpfc_sli4_dealloc_resource_identifiers(phba); |
8540 | |
8541 | /* Free the bsmbx region. */ |
8542 | lpfc_destroy_bootstrap_mbox(phba); |
8543 | |
8544 | /* Free the SLI Layer memory with SLI4 HBAs */ |
8545 | lpfc_mem_free_all(phba); |
8546 | |
8547 | /* Free the current connect table */ |
8548 | list_for_each_entry_safe(conn_entry, next_conn_entry, |
8549 | &phba->fcf_conn_rec_list, list) { |
8550 | list_del_init(entry: &conn_entry->list); |
8551 | kfree(objp: conn_entry); |
8552 | } |
8553 | |
8554 | return; |
8555 | } |
8556 | |
8557 | /** |
8558 | * lpfc_init_api_table_setup - Set up init api function jump table |
8559 | * @phba: The hba struct for which this call is being executed. |
8560 | * @dev_grp: The HBA PCI-Device group number. |
8561 | * |
8562 | * This routine sets up the device INIT interface API function jump table |
8563 | * in @phba struct. |
8564 | * |
8565 | * Returns: 0 - success, -ENODEV - failure. |
8566 | **/ |
8567 | int |
8568 | lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) |
8569 | { |
8570 | phba->lpfc_hba_init_link = lpfc_hba_init_link; |
8571 | phba->lpfc_hba_down_link = lpfc_hba_down_link; |
8572 | phba->lpfc_selective_reset = lpfc_selective_reset; |
8573 | switch (dev_grp) { |
8574 | case LPFC_PCI_DEV_LP: |
8575 | phba->lpfc_hba_down_post = lpfc_hba_down_post_s3; |
8576 | phba->lpfc_handle_eratt = lpfc_handle_eratt_s3; |
8577 | phba->lpfc_stop_port = lpfc_stop_port_s3; |
8578 | break; |
8579 | case LPFC_PCI_DEV_OC: |
8580 | phba->lpfc_hba_down_post = lpfc_hba_down_post_s4; |
8581 | phba->lpfc_handle_eratt = lpfc_handle_eratt_s4; |
8582 | phba->lpfc_stop_port = lpfc_stop_port_s4; |
8583 | break; |
8584 | default: |
8585 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
8586 | "1431 Invalid HBA PCI-device group: 0x%x\n" , |
8587 | dev_grp); |
8588 | return -ENODEV; |
8589 | } |
8590 | return 0; |
8591 | } |
8592 | |
8593 | /** |
8594 | * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources. |
8595 | * @phba: pointer to lpfc hba data structure. |
8596 | * |
8597 | * This routine is invoked to set up the driver internal resources after the |
8598 | * device specific resource setup to support the HBA device it attached to. |
8599 | * |
8600 | * Return codes |
8601 | * 0 - successful |
8602 | * other values - error |
8603 | **/ |
8604 | static int |
8605 | lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba) |
8606 | { |
8607 | int error; |
8608 | |
8609 | /* Startup the kernel thread for this host adapter. */ |
8610 | phba->worker_thread = kthread_run(lpfc_do_work, phba, |
8611 | "lpfc_worker_%d" , phba->brd_no); |
8612 | if (IS_ERR(ptr: phba->worker_thread)) { |
8613 | error = PTR_ERR(ptr: phba->worker_thread); |
8614 | return error; |
8615 | } |
8616 | |
8617 | return 0; |
8618 | } |
8619 | |
8620 | /** |
8621 | * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources. |
8622 | * @phba: pointer to lpfc hba data structure. |
8623 | * |
8624 | * This routine is invoked to unset the driver internal resources set up after |
8625 | * the device specific resource setup for supporting the HBA device it |
8626 | * attached to. |
8627 | **/ |
8628 | static void |
8629 | lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba) |
8630 | { |
8631 | if (phba->wq) { |
8632 | destroy_workqueue(wq: phba->wq); |
8633 | phba->wq = NULL; |
8634 | } |
8635 | |
8636 | /* Stop kernel worker thread */ |
8637 | if (phba->worker_thread) |
8638 | kthread_stop(k: phba->worker_thread); |
8639 | } |
8640 | |
8641 | /** |
8642 | * lpfc_free_iocb_list - Free iocb list. |
8643 | * @phba: pointer to lpfc hba data structure. |
8644 | * |
8645 | * This routine is invoked to free the driver's IOCB list and memory. |
8646 | **/ |
8647 | void |
8648 | lpfc_free_iocb_list(struct lpfc_hba *phba) |
8649 | { |
8650 | struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL; |
8651 | |
8652 | spin_lock_irq(lock: &phba->hbalock); |
8653 | list_for_each_entry_safe(iocbq_entry, iocbq_next, |
8654 | &phba->lpfc_iocb_list, list) { |
8655 | list_del(entry: &iocbq_entry->list); |
8656 | kfree(objp: iocbq_entry); |
8657 | phba->total_iocbq_bufs--; |
8658 | } |
8659 | spin_unlock_irq(lock: &phba->hbalock); |
8660 | |
8661 | return; |
8662 | } |
8663 | |
8664 | /** |
8665 | * lpfc_init_iocb_list - Allocate and initialize iocb list. |
8666 | * @phba: pointer to lpfc hba data structure. |
8667 | * @iocb_count: number of requested iocbs |
8668 | * |
8669 | * This routine is invoked to allocate and initizlize the driver's IOCB |
8670 | * list and set up the IOCB tag array accordingly. |
8671 | * |
8672 | * Return codes |
8673 | * 0 - successful |
8674 | * other values - error |
8675 | **/ |
8676 | int |
8677 | lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count) |
8678 | { |
8679 | struct lpfc_iocbq *iocbq_entry = NULL; |
8680 | uint16_t iotag; |
8681 | int i; |
8682 | |
8683 | /* Initialize and populate the iocb list per host. */ |
8684 | INIT_LIST_HEAD(list: &phba->lpfc_iocb_list); |
8685 | for (i = 0; i < iocb_count; i++) { |
8686 | iocbq_entry = kzalloc(size: sizeof(struct lpfc_iocbq), GFP_KERNEL); |
8687 | if (iocbq_entry == NULL) { |
8688 | printk(KERN_ERR "%s: only allocated %d iocbs of " |
8689 | "expected %d count. Unloading driver.\n" , |
8690 | __func__, i, iocb_count); |
8691 | goto out_free_iocbq; |
8692 | } |
8693 | |
8694 | iotag = lpfc_sli_next_iotag(phba, iocbq_entry); |
8695 | if (iotag == 0) { |
8696 | kfree(objp: iocbq_entry); |
8697 | printk(KERN_ERR "%s: failed to allocate IOTAG. " |
8698 | "Unloading driver.\n" , __func__); |
8699 | goto out_free_iocbq; |
8700 | } |
8701 | iocbq_entry->sli4_lxritag = NO_XRI; |
8702 | iocbq_entry->sli4_xritag = NO_XRI; |
8703 | |
8704 | spin_lock_irq(lock: &phba->hbalock); |
8705 | list_add(new: &iocbq_entry->list, head: &phba->lpfc_iocb_list); |
8706 | phba->total_iocbq_bufs++; |
8707 | spin_unlock_irq(lock: &phba->hbalock); |
8708 | } |
8709 | |
8710 | return 0; |
8711 | |
8712 | out_free_iocbq: |
8713 | lpfc_free_iocb_list(phba); |
8714 | |
8715 | return -ENOMEM; |
8716 | } |
8717 | |
8718 | /** |
8719 | * lpfc_free_sgl_list - Free a given sgl list. |
8720 | * @phba: pointer to lpfc hba data structure. |
8721 | * @sglq_list: pointer to the head of sgl list. |
8722 | * |
8723 | * This routine is invoked to free a give sgl list and memory. |
8724 | **/ |
8725 | void |
8726 | lpfc_free_sgl_list(struct lpfc_hba *phba, struct list_head *sglq_list) |
8727 | { |
8728 | struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL; |
8729 | |
8730 | list_for_each_entry_safe(sglq_entry, sglq_next, sglq_list, list) { |
8731 | list_del(entry: &sglq_entry->list); |
8732 | lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys); |
8733 | kfree(objp: sglq_entry); |
8734 | } |
8735 | } |
8736 | |
8737 | /** |
8738 | * lpfc_free_els_sgl_list - Free els sgl list. |
8739 | * @phba: pointer to lpfc hba data structure. |
8740 | * |
8741 | * This routine is invoked to free the driver's els sgl list and memory. |
8742 | **/ |
8743 | static void |
8744 | lpfc_free_els_sgl_list(struct lpfc_hba *phba) |
8745 | { |
8746 | LIST_HEAD(sglq_list); |
8747 | |
8748 | /* Retrieve all els sgls from driver list */ |
8749 | spin_lock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
8750 | list_splice_init(list: &phba->sli4_hba.lpfc_els_sgl_list, head: &sglq_list); |
8751 | spin_unlock_irq(lock: &phba->sli4_hba.sgl_list_lock); |
8752 | |
8753 | /* Now free the sgl list */ |
8754 | lpfc_free_sgl_list(phba, sglq_list: &sglq_list); |
8755 | } |
8756 | |
8757 | /** |
8758 | * lpfc_free_nvmet_sgl_list - Free nvmet sgl list. |
8759 | * @phba: pointer to lpfc hba data structure. |
8760 | * |
8761 | * This routine is invoked to free the driver's nvmet sgl list and memory. |
8762 | **/ |
8763 | static void |
8764 | lpfc_free_nvmet_sgl_list(struct lpfc_hba *phba) |
8765 | { |
8766 | struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL; |
8767 | LIST_HEAD(sglq_list); |
8768 | |
8769 | /* Retrieve all nvmet sgls from driver list */ |
8770 | spin_lock_irq(lock: &phba->hbalock); |
8771 | spin_lock(lock: &phba->sli4_hba.sgl_list_lock); |
8772 | list_splice_init(list: &phba->sli4_hba.lpfc_nvmet_sgl_list, head: &sglq_list); |
8773 | spin_unlock(lock: &phba->sli4_hba.sgl_list_lock); |
8774 | spin_unlock_irq(lock: &phba->hbalock); |
8775 | |
8776 | /* Now free the sgl list */ |
8777 | list_for_each_entry_safe(sglq_entry, sglq_next, &sglq_list, list) { |
8778 | list_del(entry: &sglq_entry->list); |
8779 | lpfc_nvmet_buf_free(phba, virtp: sglq_entry->virt, dma: sglq_entry->phys); |
8780 | kfree(objp: sglq_entry); |
8781 | } |
8782 | |
8783 | /* Update the nvmet_xri_cnt to reflect no current sgls. |
8784 | * The next initialization cycle sets the count and allocates |
8785 | * the sgls over again. |
8786 | */ |
8787 | phba->sli4_hba.nvmet_xri_cnt = 0; |
8788 | } |
8789 | |
8790 | /** |
8791 | * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs. |
8792 | * @phba: pointer to lpfc hba data structure. |
8793 | * |
8794 | * This routine is invoked to allocate the driver's active sgl memory. |
8795 | * This array will hold the sglq_entry's for active IOs. |
8796 | **/ |
8797 | static int |
8798 | lpfc_init_active_sgl_array(struct lpfc_hba *phba) |
8799 | { |
8800 | int size; |
8801 | size = sizeof(struct lpfc_sglq *); |
8802 | size *= phba->sli4_hba.max_cfg_param.max_xri; |
8803 | |
8804 | phba->sli4_hba.lpfc_sglq_active_list = |
8805 | kzalloc(size, GFP_KERNEL); |
8806 | if (!phba->sli4_hba.lpfc_sglq_active_list) |
8807 | return -ENOMEM; |
8808 | return 0; |
8809 | } |
8810 | |
8811 | /** |
8812 | * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs. |
8813 | * @phba: pointer to lpfc hba data structure. |
8814 | * |
8815 | * This routine is invoked to walk through the array of active sglq entries |
8816 | * and free all of the resources. |
8817 | * This is just a place holder for now. |
8818 | **/ |
8819 | static void |
8820 | lpfc_free_active_sgl(struct lpfc_hba *phba) |
8821 | { |
8822 | kfree(objp: phba->sli4_hba.lpfc_sglq_active_list); |
8823 | } |
8824 | |
8825 | /** |
8826 | * lpfc_init_sgl_list - Allocate and initialize sgl list. |
8827 | * @phba: pointer to lpfc hba data structure. |
8828 | * |
8829 | * This routine is invoked to allocate and initizlize the driver's sgl |
8830 | * list and set up the sgl xritag tag array accordingly. |
8831 | * |
8832 | **/ |
8833 | static void |
8834 | lpfc_init_sgl_list(struct lpfc_hba *phba) |
8835 | { |
8836 | /* Initialize and populate the sglq list per host/VF. */ |
8837 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_els_sgl_list); |
8838 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_abts_els_sgl_list); |
8839 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_nvmet_sgl_list); |
8840 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_abts_nvmet_ctx_list); |
8841 | |
8842 | /* els xri-sgl book keeping */ |
8843 | phba->sli4_hba.els_xri_cnt = 0; |
8844 | |
8845 | /* nvme xri-buffer book keeping */ |
8846 | phba->sli4_hba.io_xri_cnt = 0; |
8847 | } |
8848 | |
8849 | /** |
8850 | * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port |
8851 | * @phba: pointer to lpfc hba data structure. |
8852 | * |
8853 | * This routine is invoked to post rpi header templates to the |
8854 | * port for those SLI4 ports that do not support extents. This routine |
8855 | * posts a PAGE_SIZE memory region to the port to hold up to |
8856 | * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine |
8857 | * and should be called only when interrupts are disabled. |
8858 | * |
8859 | * Return codes |
8860 | * 0 - successful |
8861 | * -ERROR - otherwise. |
8862 | **/ |
8863 | int |
8864 | lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba) |
8865 | { |
8866 | int rc = 0; |
8867 | struct lpfc_rpi_hdr *rpi_hdr; |
8868 | |
8869 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_rpi_hdr_list); |
8870 | if (!phba->sli4_hba.rpi_hdrs_in_use) |
8871 | return rc; |
8872 | if (phba->sli4_hba.extents_in_use) |
8873 | return -EIO; |
8874 | |
8875 | rpi_hdr = lpfc_sli4_create_rpi_hdr(phba); |
8876 | if (!rpi_hdr) { |
8877 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
8878 | "0391 Error during rpi post operation\n" ); |
8879 | lpfc_sli4_remove_rpis(phba); |
8880 | rc = -ENODEV; |
8881 | } |
8882 | |
8883 | return rc; |
8884 | } |
8885 | |
8886 | /** |
8887 | * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region |
8888 | * @phba: pointer to lpfc hba data structure. |
8889 | * |
8890 | * This routine is invoked to allocate a single 4KB memory region to |
8891 | * support rpis and stores them in the phba. This single region |
8892 | * provides support for up to 64 rpis. The region is used globally |
8893 | * by the device. |
8894 | * |
8895 | * Returns: |
8896 | * A valid rpi hdr on success. |
8897 | * A NULL pointer on any failure. |
8898 | **/ |
8899 | struct lpfc_rpi_hdr * |
8900 | lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) |
8901 | { |
8902 | uint16_t rpi_limit, curr_rpi_range; |
8903 | struct lpfc_dmabuf *dmabuf; |
8904 | struct lpfc_rpi_hdr *rpi_hdr; |
8905 | |
8906 | /* |
8907 | * If the SLI4 port supports extents, posting the rpi header isn't |
8908 | * required. Set the expected maximum count and let the actual value |
8909 | * get set when extents are fully allocated. |
8910 | */ |
8911 | if (!phba->sli4_hba.rpi_hdrs_in_use) |
8912 | return NULL; |
8913 | if (phba->sli4_hba.extents_in_use) |
8914 | return NULL; |
8915 | |
8916 | /* The limit on the logical index is just the max_rpi count. */ |
8917 | rpi_limit = phba->sli4_hba.max_cfg_param.max_rpi; |
8918 | |
8919 | spin_lock_irq(lock: &phba->hbalock); |
8920 | /* |
8921 | * Establish the starting RPI in this header block. The starting |
8922 | * rpi is normalized to a zero base because the physical rpi is |
8923 | * port based. |
8924 | */ |
8925 | curr_rpi_range = phba->sli4_hba.next_rpi; |
8926 | spin_unlock_irq(lock: &phba->hbalock); |
8927 | |
8928 | /* Reached full RPI range */ |
8929 | if (curr_rpi_range == rpi_limit) |
8930 | return NULL; |
8931 | |
8932 | /* |
8933 | * First allocate the protocol header region for the port. The |
8934 | * port expects a 4KB DMA-mapped memory region that is 4K aligned. |
8935 | */ |
8936 | dmabuf = kzalloc(size: sizeof(struct lpfc_dmabuf), GFP_KERNEL); |
8937 | if (!dmabuf) |
8938 | return NULL; |
8939 | |
8940 | dmabuf->virt = dma_alloc_coherent(dev: &phba->pcidev->dev, |
8941 | LPFC_HDR_TEMPLATE_SIZE, |
8942 | dma_handle: &dmabuf->phys, GFP_KERNEL); |
8943 | if (!dmabuf->virt) { |
8944 | rpi_hdr = NULL; |
8945 | goto err_free_dmabuf; |
8946 | } |
8947 | |
8948 | if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) { |
8949 | rpi_hdr = NULL; |
8950 | goto err_free_coherent; |
8951 | } |
8952 | |
8953 | /* Save the rpi header data for cleanup later. */ |
8954 | rpi_hdr = kzalloc(size: sizeof(struct lpfc_rpi_hdr), GFP_KERNEL); |
8955 | if (!rpi_hdr) |
8956 | goto err_free_coherent; |
8957 | |
8958 | rpi_hdr->dmabuf = dmabuf; |
8959 | rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE; |
8960 | rpi_hdr->page_count = 1; |
8961 | spin_lock_irq(lock: &phba->hbalock); |
8962 | |
8963 | /* The rpi_hdr stores the logical index only. */ |
8964 | rpi_hdr->start_rpi = curr_rpi_range; |
8965 | rpi_hdr->next_rpi = phba->sli4_hba.next_rpi + LPFC_RPI_HDR_COUNT; |
8966 | list_add_tail(new: &rpi_hdr->list, head: &phba->sli4_hba.lpfc_rpi_hdr_list); |
8967 | |
8968 | spin_unlock_irq(lock: &phba->hbalock); |
8969 | return rpi_hdr; |
8970 | |
8971 | err_free_coherent: |
8972 | dma_free_coherent(dev: &phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE, |
8973 | cpu_addr: dmabuf->virt, dma_handle: dmabuf->phys); |
8974 | err_free_dmabuf: |
8975 | kfree(objp: dmabuf); |
8976 | return NULL; |
8977 | } |
8978 | |
8979 | /** |
8980 | * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions |
8981 | * @phba: pointer to lpfc hba data structure. |
8982 | * |
8983 | * This routine is invoked to remove all memory resources allocated |
8984 | * to support rpis for SLI4 ports not supporting extents. This routine |
8985 | * presumes the caller has released all rpis consumed by fabric or port |
8986 | * logins and is prepared to have the header pages removed. |
8987 | **/ |
8988 | void |
8989 | lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) |
8990 | { |
8991 | struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr; |
8992 | |
8993 | if (!phba->sli4_hba.rpi_hdrs_in_use) |
8994 | goto exit; |
8995 | |
8996 | list_for_each_entry_safe(rpi_hdr, next_rpi_hdr, |
8997 | &phba->sli4_hba.lpfc_rpi_hdr_list, list) { |
8998 | list_del(entry: &rpi_hdr->list); |
8999 | dma_free_coherent(dev: &phba->pcidev->dev, size: rpi_hdr->len, |
9000 | cpu_addr: rpi_hdr->dmabuf->virt, dma_handle: rpi_hdr->dmabuf->phys); |
9001 | kfree(objp: rpi_hdr->dmabuf); |
9002 | kfree(objp: rpi_hdr); |
9003 | } |
9004 | exit: |
9005 | /* There are no rpis available to the port now. */ |
9006 | phba->sli4_hba.next_rpi = 0; |
9007 | } |
9008 | |
9009 | /** |
9010 | * lpfc_hba_alloc - Allocate driver hba data structure for a device. |
9011 | * @pdev: pointer to pci device data structure. |
9012 | * |
9013 | * This routine is invoked to allocate the driver hba data structure for an |
9014 | * HBA device. If the allocation is successful, the phba reference to the |
9015 | * PCI device data structure is set. |
9016 | * |
9017 | * Return codes |
9018 | * pointer to @phba - successful |
9019 | * NULL - error |
9020 | **/ |
9021 | static struct lpfc_hba * |
9022 | lpfc_hba_alloc(struct pci_dev *pdev) |
9023 | { |
9024 | struct lpfc_hba *phba; |
9025 | |
9026 | /* Allocate memory for HBA structure */ |
9027 | phba = kzalloc(size: sizeof(struct lpfc_hba), GFP_KERNEL); |
9028 | if (!phba) { |
9029 | dev_err(&pdev->dev, "failed to allocate hba struct\n" ); |
9030 | return NULL; |
9031 | } |
9032 | |
9033 | /* Set reference to PCI device in HBA structure */ |
9034 | phba->pcidev = pdev; |
9035 | |
9036 | /* Assign an unused board number */ |
9037 | phba->brd_no = lpfc_get_instance(); |
9038 | if (phba->brd_no < 0) { |
9039 | kfree(objp: phba); |
9040 | return NULL; |
9041 | } |
9042 | phba->eratt_poll_interval = LPFC_ERATT_POLL_INTERVAL; |
9043 | |
9044 | spin_lock_init(&phba->ct_ev_lock); |
9045 | INIT_LIST_HEAD(list: &phba->ct_ev_waiters); |
9046 | |
9047 | return phba; |
9048 | } |
9049 | |
9050 | /** |
9051 | * lpfc_hba_free - Free driver hba data structure with a device. |
9052 | * @phba: pointer to lpfc hba data structure. |
9053 | * |
9054 | * This routine is invoked to free the driver hba data structure with an |
9055 | * HBA device. |
9056 | **/ |
9057 | static void |
9058 | lpfc_hba_free(struct lpfc_hba *phba) |
9059 | { |
9060 | if (phba->sli_rev == LPFC_SLI_REV4) |
9061 | kfree(objp: phba->sli4_hba.hdwq); |
9062 | |
9063 | /* Release the driver assigned board number */ |
9064 | idr_remove(&lpfc_hba_index, id: phba->brd_no); |
9065 | |
9066 | /* Free memory allocated with sli3 rings */ |
9067 | kfree(objp: phba->sli.sli3_ring); |
9068 | phba->sli.sli3_ring = NULL; |
9069 | |
9070 | kfree(objp: phba); |
9071 | return; |
9072 | } |
9073 | |
9074 | /** |
9075 | * lpfc_setup_fdmi_mask - Setup initial FDMI mask for HBA and Port attributes |
9076 | * @vport: pointer to lpfc vport data structure. |
9077 | * |
9078 | * This routine is will setup initial FDMI attribute masks for |
9079 | * FDMI2 or SmartSAN depending on module parameters. The driver will attempt |
9080 | * to get these attributes first before falling back, the attribute |
9081 | * fallback hierarchy is SmartSAN -> FDMI2 -> FMDI1 |
9082 | **/ |
9083 | void |
9084 | lpfc_setup_fdmi_mask(struct lpfc_vport *vport) |
9085 | { |
9086 | struct lpfc_hba *phba = vport->phba; |
9087 | |
9088 | vport->load_flag |= FC_ALLOW_FDMI; |
9089 | if (phba->cfg_enable_SmartSAN || |
9090 | phba->cfg_fdmi_on == LPFC_FDMI_SUPPORT) { |
9091 | /* Setup appropriate attribute masks */ |
9092 | vport->fdmi_hba_mask = LPFC_FDMI2_HBA_ATTR; |
9093 | if (phba->cfg_enable_SmartSAN) |
9094 | vport->fdmi_port_mask = LPFC_FDMI2_SMART_ATTR; |
9095 | else |
9096 | vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR; |
9097 | } |
9098 | |
9099 | lpfc_printf_log(phba, KERN_INFO, LOG_DISCOVERY, |
9100 | "6077 Setup FDMI mask: hba x%x port x%x\n" , |
9101 | vport->fdmi_hba_mask, vport->fdmi_port_mask); |
9102 | } |
9103 | |
9104 | /** |
9105 | * lpfc_create_shost - Create hba physical port with associated scsi host. |
9106 | * @phba: pointer to lpfc hba data structure. |
9107 | * |
9108 | * This routine is invoked to create HBA physical port and associate a SCSI |
9109 | * host with it. |
9110 | * |
9111 | * Return codes |
9112 | * 0 - successful |
9113 | * other values - error |
9114 | **/ |
9115 | static int |
9116 | lpfc_create_shost(struct lpfc_hba *phba) |
9117 | { |
9118 | struct lpfc_vport *vport; |
9119 | struct Scsi_Host *shost; |
9120 | |
9121 | /* Initialize HBA FC structure */ |
9122 | phba->fc_edtov = FF_DEF_EDTOV; |
9123 | phba->fc_ratov = FF_DEF_RATOV; |
9124 | phba->fc_altov = FF_DEF_ALTOV; |
9125 | phba->fc_arbtov = FF_DEF_ARBTOV; |
9126 | |
9127 | atomic_set(v: &phba->sdev_cnt, i: 0); |
9128 | vport = lpfc_create_port(phba, instance: phba->brd_no, dev: &phba->pcidev->dev); |
9129 | if (!vport) |
9130 | return -ENODEV; |
9131 | |
9132 | shost = lpfc_shost_from_vport(vport); |
9133 | phba->pport = vport; |
9134 | |
9135 | if (phba->nvmet_support) { |
9136 | /* Only 1 vport (pport) will support NVME target */ |
9137 | phba->targetport = NULL; |
9138 | phba->cfg_enable_fc4_type = LPFC_ENABLE_NVME; |
9139 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME_DISC, |
9140 | "6076 NVME Target Found\n" ); |
9141 | } |
9142 | |
9143 | lpfc_debugfs_initialize(vport); |
9144 | /* Put reference to SCSI host to driver's device private data */ |
9145 | pci_set_drvdata(pdev: phba->pcidev, data: shost); |
9146 | |
9147 | lpfc_setup_fdmi_mask(vport); |
9148 | |
9149 | /* |
9150 | * At this point we are fully registered with PSA. In addition, |
9151 | * any initial discovery should be completed. |
9152 | */ |
9153 | return 0; |
9154 | } |
9155 | |
9156 | /** |
9157 | * lpfc_destroy_shost - Destroy hba physical port with associated scsi host. |
9158 | * @phba: pointer to lpfc hba data structure. |
9159 | * |
9160 | * This routine is invoked to destroy HBA physical port and the associated |
9161 | * SCSI host. |
9162 | **/ |
9163 | static void |
9164 | lpfc_destroy_shost(struct lpfc_hba *phba) |
9165 | { |
9166 | struct lpfc_vport *vport = phba->pport; |
9167 | |
9168 | /* Destroy physical port that associated with the SCSI host */ |
9169 | destroy_port(vport); |
9170 | |
9171 | return; |
9172 | } |
9173 | |
9174 | /** |
9175 | * lpfc_setup_bg - Setup Block guard structures and debug areas. |
9176 | * @phba: pointer to lpfc hba data structure. |
9177 | * @shost: the shost to be used to detect Block guard settings. |
9178 | * |
9179 | * This routine sets up the local Block guard protocol settings for @shost. |
9180 | * This routine also allocates memory for debugging bg buffers. |
9181 | **/ |
9182 | static void |
9183 | lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost) |
9184 | { |
9185 | uint32_t old_mask; |
9186 | uint32_t old_guard; |
9187 | |
9188 | if (phba->cfg_prot_mask && phba->cfg_prot_guard) { |
9189 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
9190 | "1478 Registering BlockGuard with the " |
9191 | "SCSI layer\n" ); |
9192 | |
9193 | old_mask = phba->cfg_prot_mask; |
9194 | old_guard = phba->cfg_prot_guard; |
9195 | |
9196 | /* Only allow supported values */ |
9197 | phba->cfg_prot_mask &= (SHOST_DIF_TYPE1_PROTECTION | |
9198 | SHOST_DIX_TYPE0_PROTECTION | |
9199 | SHOST_DIX_TYPE1_PROTECTION); |
9200 | phba->cfg_prot_guard &= (SHOST_DIX_GUARD_IP | |
9201 | SHOST_DIX_GUARD_CRC); |
9202 | |
9203 | /* DIF Type 1 protection for profiles AST1/C1 is end to end */ |
9204 | if (phba->cfg_prot_mask == SHOST_DIX_TYPE1_PROTECTION) |
9205 | phba->cfg_prot_mask |= SHOST_DIF_TYPE1_PROTECTION; |
9206 | |
9207 | if (phba->cfg_prot_mask && phba->cfg_prot_guard) { |
9208 | if ((old_mask != phba->cfg_prot_mask) || |
9209 | (old_guard != phba->cfg_prot_guard)) |
9210 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9211 | "1475 Registering BlockGuard with the " |
9212 | "SCSI layer: mask %d guard %d\n" , |
9213 | phba->cfg_prot_mask, |
9214 | phba->cfg_prot_guard); |
9215 | |
9216 | scsi_host_set_prot(shost, mask: phba->cfg_prot_mask); |
9217 | scsi_host_set_guard(shost, type: phba->cfg_prot_guard); |
9218 | } else |
9219 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9220 | "1479 Not Registering BlockGuard with the SCSI " |
9221 | "layer, Bad protection parameters: %d %d\n" , |
9222 | old_mask, old_guard); |
9223 | } |
9224 | } |
9225 | |
9226 | /** |
9227 | * lpfc_post_init_setup - Perform necessary device post initialization setup. |
9228 | * @phba: pointer to lpfc hba data structure. |
9229 | * |
9230 | * This routine is invoked to perform all the necessary post initialization |
9231 | * setup for the device. |
9232 | **/ |
9233 | static void |
9234 | lpfc_post_init_setup(struct lpfc_hba *phba) |
9235 | { |
9236 | struct Scsi_Host *shost; |
9237 | struct lpfc_adapter_event_header adapter_event; |
9238 | |
9239 | /* Get the default values for Model Name and Description */ |
9240 | lpfc_get_hba_model_desc(phba, mdp: phba->ModelName, descp: phba->ModelDesc); |
9241 | |
9242 | /* |
9243 | * hba setup may have changed the hba_queue_depth so we need to |
9244 | * adjust the value of can_queue. |
9245 | */ |
9246 | shost = pci_get_drvdata(pdev: phba->pcidev); |
9247 | shost->can_queue = phba->cfg_hba_queue_depth - 10; |
9248 | |
9249 | lpfc_host_attrib_init(shost); |
9250 | |
9251 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) { |
9252 | spin_lock_irq(lock: shost->host_lock); |
9253 | lpfc_poll_start_timer(phba); |
9254 | spin_unlock_irq(lock: shost->host_lock); |
9255 | } |
9256 | |
9257 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
9258 | "0428 Perform SCSI scan\n" ); |
9259 | /* Send board arrival event to upper layer */ |
9260 | adapter_event.event_type = FC_REG_ADAPTER_EVENT; |
9261 | adapter_event.subcategory = LPFC_EVENT_ARRIVAL; |
9262 | fc_host_post_vendor_event(shost, event_number: fc_get_event_number(), |
9263 | data_len: sizeof(adapter_event), |
9264 | data_buf: (char *) &adapter_event, |
9265 | LPFC_NL_VENDOR_ID); |
9266 | return; |
9267 | } |
9268 | |
9269 | /** |
9270 | * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space. |
9271 | * @phba: pointer to lpfc hba data structure. |
9272 | * |
9273 | * This routine is invoked to set up the PCI device memory space for device |
9274 | * with SLI-3 interface spec. |
9275 | * |
9276 | * Return codes |
9277 | * 0 - successful |
9278 | * other values - error |
9279 | **/ |
9280 | static int |
9281 | lpfc_sli_pci_mem_setup(struct lpfc_hba *phba) |
9282 | { |
9283 | struct pci_dev *pdev = phba->pcidev; |
9284 | unsigned long bar0map_len, bar2map_len; |
9285 | int i, hbq_count; |
9286 | void *ptr; |
9287 | int error; |
9288 | |
9289 | if (!pdev) |
9290 | return -ENODEV; |
9291 | |
9292 | /* Set the device DMA mask size */ |
9293 | error = dma_set_mask_and_coherent(dev: &pdev->dev, DMA_BIT_MASK(64)); |
9294 | if (error) |
9295 | error = dma_set_mask_and_coherent(dev: &pdev->dev, DMA_BIT_MASK(32)); |
9296 | if (error) |
9297 | return error; |
9298 | error = -ENODEV; |
9299 | |
9300 | /* Get the bus address of Bar0 and Bar2 and the number of bytes |
9301 | * required by each mapping. |
9302 | */ |
9303 | phba->pci_bar0_map = pci_resource_start(pdev, 0); |
9304 | bar0map_len = pci_resource_len(pdev, 0); |
9305 | |
9306 | phba->pci_bar2_map = pci_resource_start(pdev, 2); |
9307 | bar2map_len = pci_resource_len(pdev, 2); |
9308 | |
9309 | /* Map HBA SLIM to a kernel virtual address. */ |
9310 | phba->slim_memmap_p = ioremap(offset: phba->pci_bar0_map, size: bar0map_len); |
9311 | if (!phba->slim_memmap_p) { |
9312 | dev_printk(KERN_ERR, &pdev->dev, |
9313 | "ioremap failed for SLIM memory.\n" ); |
9314 | goto out; |
9315 | } |
9316 | |
9317 | /* Map HBA Control Registers to a kernel virtual address. */ |
9318 | phba->ctrl_regs_memmap_p = ioremap(offset: phba->pci_bar2_map, size: bar2map_len); |
9319 | if (!phba->ctrl_regs_memmap_p) { |
9320 | dev_printk(KERN_ERR, &pdev->dev, |
9321 | "ioremap failed for HBA control registers.\n" ); |
9322 | goto out_iounmap_slim; |
9323 | } |
9324 | |
9325 | /* Allocate memory for SLI-2 structures */ |
9326 | phba->slim2p.virt = dma_alloc_coherent(dev: &pdev->dev, SLI2_SLIM_SIZE, |
9327 | dma_handle: &phba->slim2p.phys, GFP_KERNEL); |
9328 | if (!phba->slim2p.virt) |
9329 | goto out_iounmap; |
9330 | |
9331 | phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx); |
9332 | phba->mbox_ext = (phba->slim2p.virt + |
9333 | offsetof(struct lpfc_sli2_slim, mbx_ext_words)); |
9334 | phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb)); |
9335 | phba->IOCBs = (phba->slim2p.virt + |
9336 | offsetof(struct lpfc_sli2_slim, IOCBs)); |
9337 | |
9338 | phba->hbqslimp.virt = dma_alloc_coherent(dev: &pdev->dev, |
9339 | size: lpfc_sli_hbq_size(), |
9340 | dma_handle: &phba->hbqslimp.phys, |
9341 | GFP_KERNEL); |
9342 | if (!phba->hbqslimp.virt) |
9343 | goto out_free_slim; |
9344 | |
9345 | hbq_count = lpfc_sli_hbq_count(); |
9346 | ptr = phba->hbqslimp.virt; |
9347 | for (i = 0; i < hbq_count; ++i) { |
9348 | phba->hbqs[i].hbq_virt = ptr; |
9349 | INIT_LIST_HEAD(list: &phba->hbqs[i].hbq_buffer_list); |
9350 | ptr += (lpfc_hbq_defs[i]->entry_count * |
9351 | sizeof(struct lpfc_hbq_entry)); |
9352 | } |
9353 | phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc; |
9354 | phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free; |
9355 | |
9356 | memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size()); |
9357 | |
9358 | phba->MBslimaddr = phba->slim_memmap_p; |
9359 | phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; |
9360 | phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; |
9361 | phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; |
9362 | phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; |
9363 | |
9364 | return 0; |
9365 | |
9366 | out_free_slim: |
9367 | dma_free_coherent(dev: &pdev->dev, SLI2_SLIM_SIZE, |
9368 | cpu_addr: phba->slim2p.virt, dma_handle: phba->slim2p.phys); |
9369 | out_iounmap: |
9370 | iounmap(addr: phba->ctrl_regs_memmap_p); |
9371 | out_iounmap_slim: |
9372 | iounmap(addr: phba->slim_memmap_p); |
9373 | out: |
9374 | return error; |
9375 | } |
9376 | |
9377 | /** |
9378 | * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space. |
9379 | * @phba: pointer to lpfc hba data structure. |
9380 | * |
9381 | * This routine is invoked to unset the PCI device memory space for device |
9382 | * with SLI-3 interface spec. |
9383 | **/ |
9384 | static void |
9385 | lpfc_sli_pci_mem_unset(struct lpfc_hba *phba) |
9386 | { |
9387 | struct pci_dev *pdev; |
9388 | |
9389 | /* Obtain PCI device reference */ |
9390 | if (!phba->pcidev) |
9391 | return; |
9392 | else |
9393 | pdev = phba->pcidev; |
9394 | |
9395 | /* Free coherent DMA memory allocated */ |
9396 | dma_free_coherent(dev: &pdev->dev, size: lpfc_sli_hbq_size(), |
9397 | cpu_addr: phba->hbqslimp.virt, dma_handle: phba->hbqslimp.phys); |
9398 | dma_free_coherent(dev: &pdev->dev, SLI2_SLIM_SIZE, |
9399 | cpu_addr: phba->slim2p.virt, dma_handle: phba->slim2p.phys); |
9400 | |
9401 | /* I/O memory unmap */ |
9402 | iounmap(addr: phba->ctrl_regs_memmap_p); |
9403 | iounmap(addr: phba->slim_memmap_p); |
9404 | |
9405 | return; |
9406 | } |
9407 | |
9408 | /** |
9409 | * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status |
9410 | * @phba: pointer to lpfc hba data structure. |
9411 | * |
9412 | * This routine is invoked to wait for SLI4 device Power On Self Test (POST) |
9413 | * done and check status. |
9414 | * |
9415 | * Return 0 if successful, otherwise -ENODEV. |
9416 | **/ |
9417 | int |
9418 | lpfc_sli4_post_status_check(struct lpfc_hba *phba) |
9419 | { |
9420 | struct lpfc_register portsmphr_reg, uerrlo_reg, uerrhi_reg; |
9421 | struct lpfc_register reg_data; |
9422 | int i, port_error = 0; |
9423 | uint32_t if_type; |
9424 | |
9425 | memset(&portsmphr_reg, 0, sizeof(portsmphr_reg)); |
9426 | memset(®_data, 0, sizeof(reg_data)); |
9427 | if (!phba->sli4_hba.PSMPHRregaddr) |
9428 | return -ENODEV; |
9429 | |
9430 | /* Wait up to 30 seconds for the SLI Port POST done and ready */ |
9431 | for (i = 0; i < 3000; i++) { |
9432 | if (lpfc_readl(addr: phba->sli4_hba.PSMPHRregaddr, |
9433 | data: &portsmphr_reg.word0) || |
9434 | (bf_get(lpfc_port_smphr_perr, &portsmphr_reg))) { |
9435 | /* Port has a fatal POST error, break out */ |
9436 | port_error = -ENODEV; |
9437 | break; |
9438 | } |
9439 | if (LPFC_POST_STAGE_PORT_READY == |
9440 | bf_get(lpfc_port_smphr_port_status, &portsmphr_reg)) |
9441 | break; |
9442 | msleep(msecs: 10); |
9443 | } |
9444 | |
9445 | /* |
9446 | * If there was a port error during POST, then don't proceed with |
9447 | * other register reads as the data may not be valid. Just exit. |
9448 | */ |
9449 | if (port_error) { |
9450 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9451 | "1408 Port Failed POST - portsmphr=0x%x, " |
9452 | "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, " |
9453 | "scr2=x%x, hscratch=x%x, pstatus=x%x\n" , |
9454 | portsmphr_reg.word0, |
9455 | bf_get(lpfc_port_smphr_perr, &portsmphr_reg), |
9456 | bf_get(lpfc_port_smphr_sfi, &portsmphr_reg), |
9457 | bf_get(lpfc_port_smphr_nip, &portsmphr_reg), |
9458 | bf_get(lpfc_port_smphr_ipc, &portsmphr_reg), |
9459 | bf_get(lpfc_port_smphr_scr1, &portsmphr_reg), |
9460 | bf_get(lpfc_port_smphr_scr2, &portsmphr_reg), |
9461 | bf_get(lpfc_port_smphr_host_scratch, &portsmphr_reg), |
9462 | bf_get(lpfc_port_smphr_port_status, &portsmphr_reg)); |
9463 | } else { |
9464 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
9465 | "2534 Device Info: SLIFamily=0x%x, " |
9466 | "SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, " |
9467 | "SLIHint_2=0x%x, FT=0x%x\n" , |
9468 | bf_get(lpfc_sli_intf_sli_family, |
9469 | &phba->sli4_hba.sli_intf), |
9470 | bf_get(lpfc_sli_intf_slirev, |
9471 | &phba->sli4_hba.sli_intf), |
9472 | bf_get(lpfc_sli_intf_if_type, |
9473 | &phba->sli4_hba.sli_intf), |
9474 | bf_get(lpfc_sli_intf_sli_hint1, |
9475 | &phba->sli4_hba.sli_intf), |
9476 | bf_get(lpfc_sli_intf_sli_hint2, |
9477 | &phba->sli4_hba.sli_intf), |
9478 | bf_get(lpfc_sli_intf_func_type, |
9479 | &phba->sli4_hba.sli_intf)); |
9480 | /* |
9481 | * Check for other Port errors during the initialization |
9482 | * process. Fail the load if the port did not come up |
9483 | * correctly. |
9484 | */ |
9485 | if_type = bf_get(lpfc_sli_intf_if_type, |
9486 | &phba->sli4_hba.sli_intf); |
9487 | switch (if_type) { |
9488 | case LPFC_SLI_INTF_IF_TYPE_0: |
9489 | phba->sli4_hba.ue_mask_lo = |
9490 | readl(addr: phba->sli4_hba.u.if_type0.UEMASKLOregaddr); |
9491 | phba->sli4_hba.ue_mask_hi = |
9492 | readl(addr: phba->sli4_hba.u.if_type0.UEMASKHIregaddr); |
9493 | uerrlo_reg.word0 = |
9494 | readl(addr: phba->sli4_hba.u.if_type0.UERRLOregaddr); |
9495 | uerrhi_reg.word0 = |
9496 | readl(addr: phba->sli4_hba.u.if_type0.UERRHIregaddr); |
9497 | if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) || |
9498 | (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) { |
9499 | lpfc_printf_log(phba, KERN_ERR, |
9500 | LOG_TRACE_EVENT, |
9501 | "1422 Unrecoverable Error " |
9502 | "Detected during POST " |
9503 | "uerr_lo_reg=0x%x, " |
9504 | "uerr_hi_reg=0x%x, " |
9505 | "ue_mask_lo_reg=0x%x, " |
9506 | "ue_mask_hi_reg=0x%x\n" , |
9507 | uerrlo_reg.word0, |
9508 | uerrhi_reg.word0, |
9509 | phba->sli4_hba.ue_mask_lo, |
9510 | phba->sli4_hba.ue_mask_hi); |
9511 | port_error = -ENODEV; |
9512 | } |
9513 | break; |
9514 | case LPFC_SLI_INTF_IF_TYPE_2: |
9515 | case LPFC_SLI_INTF_IF_TYPE_6: |
9516 | /* Final checks. The port status should be clean. */ |
9517 | if (lpfc_readl(addr: phba->sli4_hba.u.if_type2.STATUSregaddr, |
9518 | data: ®_data.word0) || |
9519 | lpfc_sli4_unrecoverable_port(portstat_reg: ®_data)) { |
9520 | phba->work_status[0] = |
9521 | readl(addr: phba->sli4_hba.u.if_type2. |
9522 | ERR1regaddr); |
9523 | phba->work_status[1] = |
9524 | readl(addr: phba->sli4_hba.u.if_type2. |
9525 | ERR2regaddr); |
9526 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9527 | "2888 Unrecoverable port error " |
9528 | "following POST: port status reg " |
9529 | "0x%x, port_smphr reg 0x%x, " |
9530 | "error 1=0x%x, error 2=0x%x\n" , |
9531 | reg_data.word0, |
9532 | portsmphr_reg.word0, |
9533 | phba->work_status[0], |
9534 | phba->work_status[1]); |
9535 | port_error = -ENODEV; |
9536 | break; |
9537 | } |
9538 | |
9539 | if (lpfc_pldv_detect && |
9540 | bf_get(lpfc_sli_intf_sli_family, |
9541 | &phba->sli4_hba.sli_intf) == |
9542 | LPFC_SLI_INTF_FAMILY_G6) |
9543 | pci_write_config_byte(dev: phba->pcidev, |
9544 | LPFC_SLI_INTF, CFG_PLD); |
9545 | break; |
9546 | case LPFC_SLI_INTF_IF_TYPE_1: |
9547 | default: |
9548 | break; |
9549 | } |
9550 | } |
9551 | return port_error; |
9552 | } |
9553 | |
9554 | /** |
9555 | * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map. |
9556 | * @phba: pointer to lpfc hba data structure. |
9557 | * @if_type: The SLI4 interface type getting configured. |
9558 | * |
9559 | * This routine is invoked to set up SLI4 BAR0 PCI config space register |
9560 | * memory map. |
9561 | **/ |
9562 | static void |
9563 | lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type) |
9564 | { |
9565 | switch (if_type) { |
9566 | case LPFC_SLI_INTF_IF_TYPE_0: |
9567 | phba->sli4_hba.u.if_type0.UERRLOregaddr = |
9568 | phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_LO; |
9569 | phba->sli4_hba.u.if_type0.UERRHIregaddr = |
9570 | phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_HI; |
9571 | phba->sli4_hba.u.if_type0.UEMASKLOregaddr = |
9572 | phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_LO; |
9573 | phba->sli4_hba.u.if_type0.UEMASKHIregaddr = |
9574 | phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_HI; |
9575 | phba->sli4_hba.SLIINTFregaddr = |
9576 | phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF; |
9577 | break; |
9578 | case LPFC_SLI_INTF_IF_TYPE_2: |
9579 | phba->sli4_hba.u.if_type2.EQDregaddr = |
9580 | phba->sli4_hba.conf_regs_memmap_p + |
9581 | LPFC_CTL_PORT_EQ_DELAY_OFFSET; |
9582 | phba->sli4_hba.u.if_type2.ERR1regaddr = |
9583 | phba->sli4_hba.conf_regs_memmap_p + |
9584 | LPFC_CTL_PORT_ER1_OFFSET; |
9585 | phba->sli4_hba.u.if_type2.ERR2regaddr = |
9586 | phba->sli4_hba.conf_regs_memmap_p + |
9587 | LPFC_CTL_PORT_ER2_OFFSET; |
9588 | phba->sli4_hba.u.if_type2.CTRLregaddr = |
9589 | phba->sli4_hba.conf_regs_memmap_p + |
9590 | LPFC_CTL_PORT_CTL_OFFSET; |
9591 | phba->sli4_hba.u.if_type2.STATUSregaddr = |
9592 | phba->sli4_hba.conf_regs_memmap_p + |
9593 | LPFC_CTL_PORT_STA_OFFSET; |
9594 | phba->sli4_hba.SLIINTFregaddr = |
9595 | phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF; |
9596 | phba->sli4_hba.PSMPHRregaddr = |
9597 | phba->sli4_hba.conf_regs_memmap_p + |
9598 | LPFC_CTL_PORT_SEM_OFFSET; |
9599 | phba->sli4_hba.RQDBregaddr = |
9600 | phba->sli4_hba.conf_regs_memmap_p + |
9601 | LPFC_ULP0_RQ_DOORBELL; |
9602 | phba->sli4_hba.WQDBregaddr = |
9603 | phba->sli4_hba.conf_regs_memmap_p + |
9604 | LPFC_ULP0_WQ_DOORBELL; |
9605 | phba->sli4_hba.CQDBregaddr = |
9606 | phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL; |
9607 | phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr; |
9608 | phba->sli4_hba.MQDBregaddr = |
9609 | phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL; |
9610 | phba->sli4_hba.BMBXregaddr = |
9611 | phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX; |
9612 | break; |
9613 | case LPFC_SLI_INTF_IF_TYPE_6: |
9614 | phba->sli4_hba.u.if_type2.EQDregaddr = |
9615 | phba->sli4_hba.conf_regs_memmap_p + |
9616 | LPFC_CTL_PORT_EQ_DELAY_OFFSET; |
9617 | phba->sli4_hba.u.if_type2.ERR1regaddr = |
9618 | phba->sli4_hba.conf_regs_memmap_p + |
9619 | LPFC_CTL_PORT_ER1_OFFSET; |
9620 | phba->sli4_hba.u.if_type2.ERR2regaddr = |
9621 | phba->sli4_hba.conf_regs_memmap_p + |
9622 | LPFC_CTL_PORT_ER2_OFFSET; |
9623 | phba->sli4_hba.u.if_type2.CTRLregaddr = |
9624 | phba->sli4_hba.conf_regs_memmap_p + |
9625 | LPFC_CTL_PORT_CTL_OFFSET; |
9626 | phba->sli4_hba.u.if_type2.STATUSregaddr = |
9627 | phba->sli4_hba.conf_regs_memmap_p + |
9628 | LPFC_CTL_PORT_STA_OFFSET; |
9629 | phba->sli4_hba.PSMPHRregaddr = |
9630 | phba->sli4_hba.conf_regs_memmap_p + |
9631 | LPFC_CTL_PORT_SEM_OFFSET; |
9632 | phba->sli4_hba.BMBXregaddr = |
9633 | phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX; |
9634 | break; |
9635 | case LPFC_SLI_INTF_IF_TYPE_1: |
9636 | default: |
9637 | dev_printk(KERN_ERR, &phba->pcidev->dev, |
9638 | "FATAL - unsupported SLI4 interface type - %d\n" , |
9639 | if_type); |
9640 | break; |
9641 | } |
9642 | } |
9643 | |
9644 | /** |
9645 | * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map. |
9646 | * @phba: pointer to lpfc hba data structure. |
9647 | * @if_type: sli if type to operate on. |
9648 | * |
9649 | * This routine is invoked to set up SLI4 BAR1 register memory map. |
9650 | **/ |
9651 | static void |
9652 | lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba, uint32_t if_type) |
9653 | { |
9654 | switch (if_type) { |
9655 | case LPFC_SLI_INTF_IF_TYPE_0: |
9656 | phba->sli4_hba.PSMPHRregaddr = |
9657 | phba->sli4_hba.ctrl_regs_memmap_p + |
9658 | LPFC_SLIPORT_IF0_SMPHR; |
9659 | phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p + |
9660 | LPFC_HST_ISR0; |
9661 | phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p + |
9662 | LPFC_HST_IMR0; |
9663 | phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p + |
9664 | LPFC_HST_ISCR0; |
9665 | break; |
9666 | case LPFC_SLI_INTF_IF_TYPE_6: |
9667 | phba->sli4_hba.RQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p + |
9668 | LPFC_IF6_RQ_DOORBELL; |
9669 | phba->sli4_hba.WQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p + |
9670 | LPFC_IF6_WQ_DOORBELL; |
9671 | phba->sli4_hba.CQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p + |
9672 | LPFC_IF6_CQ_DOORBELL; |
9673 | phba->sli4_hba.EQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p + |
9674 | LPFC_IF6_EQ_DOORBELL; |
9675 | phba->sli4_hba.MQDBregaddr = phba->sli4_hba.drbl_regs_memmap_p + |
9676 | LPFC_IF6_MQ_DOORBELL; |
9677 | break; |
9678 | case LPFC_SLI_INTF_IF_TYPE_2: |
9679 | case LPFC_SLI_INTF_IF_TYPE_1: |
9680 | default: |
9681 | dev_err(&phba->pcidev->dev, |
9682 | "FATAL - unsupported SLI4 interface type - %d\n" , |
9683 | if_type); |
9684 | break; |
9685 | } |
9686 | } |
9687 | |
9688 | /** |
9689 | * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map. |
9690 | * @phba: pointer to lpfc hba data structure. |
9691 | * @vf: virtual function number |
9692 | * |
9693 | * This routine is invoked to set up SLI4 BAR2 doorbell register memory map |
9694 | * based on the given viftual function number, @vf. |
9695 | * |
9696 | * Return 0 if successful, otherwise -ENODEV. |
9697 | **/ |
9698 | static int |
9699 | lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf) |
9700 | { |
9701 | if (vf > LPFC_VIR_FUNC_MAX) |
9702 | return -ENODEV; |
9703 | |
9704 | phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p + |
9705 | vf * LPFC_VFR_PAGE_SIZE + |
9706 | LPFC_ULP0_RQ_DOORBELL); |
9707 | phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p + |
9708 | vf * LPFC_VFR_PAGE_SIZE + |
9709 | LPFC_ULP0_WQ_DOORBELL); |
9710 | phba->sli4_hba.CQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p + |
9711 | vf * LPFC_VFR_PAGE_SIZE + |
9712 | LPFC_EQCQ_DOORBELL); |
9713 | phba->sli4_hba.EQDBregaddr = phba->sli4_hba.CQDBregaddr; |
9714 | phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p + |
9715 | vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL); |
9716 | phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p + |
9717 | vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX); |
9718 | return 0; |
9719 | } |
9720 | |
9721 | /** |
9722 | * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox |
9723 | * @phba: pointer to lpfc hba data structure. |
9724 | * |
9725 | * This routine is invoked to create the bootstrap mailbox |
9726 | * region consistent with the SLI-4 interface spec. This |
9727 | * routine allocates all memory necessary to communicate |
9728 | * mailbox commands to the port and sets up all alignment |
9729 | * needs. No locks are expected to be held when calling |
9730 | * this routine. |
9731 | * |
9732 | * Return codes |
9733 | * 0 - successful |
9734 | * -ENOMEM - could not allocated memory. |
9735 | **/ |
9736 | static int |
9737 | lpfc_create_bootstrap_mbox(struct lpfc_hba *phba) |
9738 | { |
9739 | uint32_t bmbx_size; |
9740 | struct lpfc_dmabuf *dmabuf; |
9741 | struct dma_address *dma_address; |
9742 | uint32_t pa_addr; |
9743 | uint64_t phys_addr; |
9744 | |
9745 | dmabuf = kzalloc(size: sizeof(struct lpfc_dmabuf), GFP_KERNEL); |
9746 | if (!dmabuf) |
9747 | return -ENOMEM; |
9748 | |
9749 | /* |
9750 | * The bootstrap mailbox region is comprised of 2 parts |
9751 | * plus an alignment restriction of 16 bytes. |
9752 | */ |
9753 | bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1); |
9754 | dmabuf->virt = dma_alloc_coherent(dev: &phba->pcidev->dev, size: bmbx_size, |
9755 | dma_handle: &dmabuf->phys, GFP_KERNEL); |
9756 | if (!dmabuf->virt) { |
9757 | kfree(objp: dmabuf); |
9758 | return -ENOMEM; |
9759 | } |
9760 | |
9761 | /* |
9762 | * Initialize the bootstrap mailbox pointers now so that the register |
9763 | * operations are simple later. The mailbox dma address is required |
9764 | * to be 16-byte aligned. Also align the virtual memory as each |
9765 | * maibox is copied into the bmbx mailbox region before issuing the |
9766 | * command to the port. |
9767 | */ |
9768 | phba->sli4_hba.bmbx.dmabuf = dmabuf; |
9769 | phba->sli4_hba.bmbx.bmbx_size = bmbx_size; |
9770 | |
9771 | phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt, |
9772 | LPFC_ALIGN_16_BYTE); |
9773 | phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys, |
9774 | LPFC_ALIGN_16_BYTE); |
9775 | |
9776 | /* |
9777 | * Set the high and low physical addresses now. The SLI4 alignment |
9778 | * requirement is 16 bytes and the mailbox is posted to the port |
9779 | * as two 30-bit addresses. The other data is a bit marking whether |
9780 | * the 30-bit address is the high or low address. |
9781 | * Upcast bmbx aphys to 64bits so shift instruction compiles |
9782 | * clean on 32 bit machines. |
9783 | */ |
9784 | dma_address = &phba->sli4_hba.bmbx.dma_address; |
9785 | phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys; |
9786 | pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff); |
9787 | dma_address->addr_hi = (uint32_t) ((pa_addr << 2) | |
9788 | LPFC_BMBX_BIT1_ADDR_HI); |
9789 | |
9790 | pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff); |
9791 | dma_address->addr_lo = (uint32_t) ((pa_addr << 2) | |
9792 | LPFC_BMBX_BIT1_ADDR_LO); |
9793 | return 0; |
9794 | } |
9795 | |
9796 | /** |
9797 | * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources |
9798 | * @phba: pointer to lpfc hba data structure. |
9799 | * |
9800 | * This routine is invoked to teardown the bootstrap mailbox |
9801 | * region and release all host resources. This routine requires |
9802 | * the caller to ensure all mailbox commands recovered, no |
9803 | * additional mailbox comands are sent, and interrupts are disabled |
9804 | * before calling this routine. |
9805 | * |
9806 | **/ |
9807 | static void |
9808 | lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba) |
9809 | { |
9810 | dma_free_coherent(dev: &phba->pcidev->dev, |
9811 | size: phba->sli4_hba.bmbx.bmbx_size, |
9812 | cpu_addr: phba->sli4_hba.bmbx.dmabuf->virt, |
9813 | dma_handle: phba->sli4_hba.bmbx.dmabuf->phys); |
9814 | |
9815 | kfree(objp: phba->sli4_hba.bmbx.dmabuf); |
9816 | memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx)); |
9817 | } |
9818 | |
9819 | static const char * const lpfc_topo_to_str[] = { |
9820 | "Loop then P2P" , |
9821 | "Loopback" , |
9822 | "P2P Only" , |
9823 | "Unsupported" , |
9824 | "Loop Only" , |
9825 | "Unsupported" , |
9826 | "P2P then Loop" , |
9827 | }; |
9828 | |
9829 | #define LINK_FLAGS_DEF 0x0 |
9830 | #define LINK_FLAGS_P2P 0x1 |
9831 | #define LINK_FLAGS_LOOP 0x2 |
9832 | /** |
9833 | * lpfc_map_topology - Map the topology read from READ_CONFIG |
9834 | * @phba: pointer to lpfc hba data structure. |
9835 | * @rd_config: pointer to read config data |
9836 | * |
9837 | * This routine is invoked to map the topology values as read |
9838 | * from the read config mailbox command. If the persistent |
9839 | * topology feature is supported, the firmware will provide the |
9840 | * saved topology information to be used in INIT_LINK |
9841 | **/ |
9842 | static void |
9843 | lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config) |
9844 | { |
9845 | u8 ptv, tf, pt; |
9846 | |
9847 | ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config); |
9848 | tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config); |
9849 | pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config); |
9850 | |
9851 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
9852 | "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x" , |
9853 | ptv, tf, pt); |
9854 | if (!ptv) { |
9855 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
9856 | "2019 FW does not support persistent topology " |
9857 | "Using driver parameter defined value [%s]" , |
9858 | lpfc_topo_to_str[phba->cfg_topology]); |
9859 | return; |
9860 | } |
9861 | /* FW supports persistent topology - override module parameter value */ |
9862 | phba->hba_flag |= HBA_PERSISTENT_TOPO; |
9863 | |
9864 | /* if ASIC_GEN_NUM >= 0xC) */ |
9865 | if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == |
9866 | LPFC_SLI_INTF_IF_TYPE_6) || |
9867 | (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) == |
9868 | LPFC_SLI_INTF_FAMILY_G6)) { |
9869 | if (!tf) { |
9870 | phba->cfg_topology = ((pt == LINK_FLAGS_LOOP) |
9871 | ? FLAGS_TOPOLOGY_MODE_LOOP |
9872 | : FLAGS_TOPOLOGY_MODE_PT_PT); |
9873 | } else { |
9874 | phba->hba_flag &= ~HBA_PERSISTENT_TOPO; |
9875 | } |
9876 | } else { /* G5 */ |
9877 | if (tf) { |
9878 | /* If topology failover set - pt is '0' or '1' */ |
9879 | phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP : |
9880 | FLAGS_TOPOLOGY_MODE_LOOP_PT); |
9881 | } else { |
9882 | phba->cfg_topology = ((pt == LINK_FLAGS_P2P) |
9883 | ? FLAGS_TOPOLOGY_MODE_PT_PT |
9884 | : FLAGS_TOPOLOGY_MODE_LOOP); |
9885 | } |
9886 | } |
9887 | if (phba->hba_flag & HBA_PERSISTENT_TOPO) { |
9888 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
9889 | "2020 Using persistent topology value [%s]" , |
9890 | lpfc_topo_to_str[phba->cfg_topology]); |
9891 | } else { |
9892 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
9893 | "2021 Invalid topology values from FW " |
9894 | "Using driver parameter defined value [%s]" , |
9895 | lpfc_topo_to_str[phba->cfg_topology]); |
9896 | } |
9897 | } |
9898 | |
9899 | /** |
9900 | * lpfc_sli4_read_config - Get the config parameters. |
9901 | * @phba: pointer to lpfc hba data structure. |
9902 | * |
9903 | * This routine is invoked to read the configuration parameters from the HBA. |
9904 | * The configuration parameters are used to set the base and maximum values |
9905 | * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource |
9906 | * allocation for the port. |
9907 | * |
9908 | * Return codes |
9909 | * 0 - successful |
9910 | * -ENOMEM - No available memory |
9911 | * -EIO - The mailbox failed to complete successfully. |
9912 | **/ |
9913 | int |
9914 | lpfc_sli4_read_config(struct lpfc_hba *phba) |
9915 | { |
9916 | LPFC_MBOXQ_t *pmb; |
9917 | struct lpfc_mbx_read_config *rd_config; |
9918 | union lpfc_sli4_cfg_shdr *shdr; |
9919 | uint32_t shdr_status, shdr_add_status; |
9920 | struct lpfc_mbx_get_func_cfg *get_func_cfg; |
9921 | struct lpfc_rsrc_desc_fcfcoe *desc; |
9922 | char *pdesc_0; |
9923 | uint16_t forced_link_speed; |
9924 | uint32_t if_type, qmin, fawwpn; |
9925 | int length, i, rc = 0, rc2; |
9926 | |
9927 | pmb = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
9928 | if (!pmb) { |
9929 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9930 | "2011 Unable to allocate memory for issuing " |
9931 | "SLI_CONFIG_SPECIAL mailbox command\n" ); |
9932 | return -ENOMEM; |
9933 | } |
9934 | |
9935 | lpfc_read_config(phba, pmb); |
9936 | |
9937 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
9938 | if (rc != MBX_SUCCESS) { |
9939 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
9940 | "2012 Mailbox failed , mbxCmd x%x " |
9941 | "READ_CONFIG, mbxStatus x%x\n" , |
9942 | bf_get(lpfc_mqe_command, &pmb->u.mqe), |
9943 | bf_get(lpfc_mqe_status, &pmb->u.mqe)); |
9944 | rc = -EIO; |
9945 | } else { |
9946 | rd_config = &pmb->u.mqe.un.rd_config; |
9947 | if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) { |
9948 | phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL; |
9949 | phba->sli4_hba.lnk_info.lnk_tp = |
9950 | bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config); |
9951 | phba->sli4_hba.lnk_info.lnk_no = |
9952 | bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config); |
9953 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
9954 | "3081 lnk_type:%d, lnk_numb:%d\n" , |
9955 | phba->sli4_hba.lnk_info.lnk_tp, |
9956 | phba->sli4_hba.lnk_info.lnk_no); |
9957 | } else |
9958 | lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, |
9959 | "3082 Mailbox (x%x) returned ldv:x0\n" , |
9960 | bf_get(lpfc_mqe_command, &pmb->u.mqe)); |
9961 | if (bf_get(lpfc_mbx_rd_conf_bbscn_def, rd_config)) { |
9962 | phba->bbcredit_support = 1; |
9963 | phba->sli4_hba.bbscn_params.word0 = rd_config->word8; |
9964 | } |
9965 | |
9966 | fawwpn = bf_get(lpfc_mbx_rd_conf_fawwpn, rd_config); |
9967 | |
9968 | if (fawwpn) { |
9969 | lpfc_printf_log(phba, KERN_INFO, |
9970 | LOG_INIT | LOG_DISCOVERY, |
9971 | "2702 READ_CONFIG: FA-PWWN is " |
9972 | "configured on\n" ); |
9973 | phba->sli4_hba.fawwpn_flag |= LPFC_FAWWPN_CONFIG; |
9974 | } else { |
9975 | /* Clear FW configured flag, preserve driver flag */ |
9976 | phba->sli4_hba.fawwpn_flag &= ~LPFC_FAWWPN_CONFIG; |
9977 | } |
9978 | |
9979 | phba->sli4_hba.conf_trunk = |
9980 | bf_get(lpfc_mbx_rd_conf_trunk, rd_config); |
9981 | phba->sli4_hba.extents_in_use = |
9982 | bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config); |
9983 | |
9984 | phba->sli4_hba.max_cfg_param.max_xri = |
9985 | bf_get(lpfc_mbx_rd_conf_xri_count, rd_config); |
9986 | /* Reduce resource usage in kdump environment */ |
9987 | if (is_kdump_kernel() && |
9988 | phba->sli4_hba.max_cfg_param.max_xri > 512) |
9989 | phba->sli4_hba.max_cfg_param.max_xri = 512; |
9990 | phba->sli4_hba.max_cfg_param.xri_base = |
9991 | bf_get(lpfc_mbx_rd_conf_xri_base, rd_config); |
9992 | phba->sli4_hba.max_cfg_param.max_vpi = |
9993 | bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config); |
9994 | /* Limit the max we support */ |
9995 | if (phba->sli4_hba.max_cfg_param.max_vpi > LPFC_MAX_VPORTS) |
9996 | phba->sli4_hba.max_cfg_param.max_vpi = LPFC_MAX_VPORTS; |
9997 | phba->sli4_hba.max_cfg_param.vpi_base = |
9998 | bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config); |
9999 | phba->sli4_hba.max_cfg_param.max_rpi = |
10000 | bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config); |
10001 | phba->sli4_hba.max_cfg_param.rpi_base = |
10002 | bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config); |
10003 | phba->sli4_hba.max_cfg_param.max_vfi = |
10004 | bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config); |
10005 | phba->sli4_hba.max_cfg_param.vfi_base = |
10006 | bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config); |
10007 | phba->sli4_hba.max_cfg_param.max_fcfi = |
10008 | bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config); |
10009 | phba->sli4_hba.max_cfg_param.max_eq = |
10010 | bf_get(lpfc_mbx_rd_conf_eq_count, rd_config); |
10011 | phba->sli4_hba.max_cfg_param.max_rq = |
10012 | bf_get(lpfc_mbx_rd_conf_rq_count, rd_config); |
10013 | phba->sli4_hba.max_cfg_param.max_wq = |
10014 | bf_get(lpfc_mbx_rd_conf_wq_count, rd_config); |
10015 | phba->sli4_hba.max_cfg_param.max_cq = |
10016 | bf_get(lpfc_mbx_rd_conf_cq_count, rd_config); |
10017 | phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config); |
10018 | phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base; |
10019 | phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base; |
10020 | phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base; |
10021 | phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ? |
10022 | (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; |
10023 | phba->max_vports = phba->max_vpi; |
10024 | |
10025 | /* Next decide on FPIN or Signal E2E CGN support |
10026 | * For congestion alarms and warnings valid combination are: |
10027 | * 1. FPIN alarms / FPIN warnings |
10028 | * 2. Signal alarms / Signal warnings |
10029 | * 3. FPIN alarms / Signal warnings |
10030 | * 4. Signal alarms / FPIN warnings |
10031 | * |
10032 | * Initialize the adapter frequency to 100 mSecs |
10033 | */ |
10034 | phba->cgn_reg_fpin = LPFC_CGN_FPIN_BOTH; |
10035 | phba->cgn_reg_signal = EDC_CG_SIG_NOTSUPPORTED; |
10036 | phba->cgn_sig_freq = lpfc_fabric_cgn_frequency; |
10037 | |
10038 | if (lpfc_use_cgn_signal) { |
10039 | if (bf_get(lpfc_mbx_rd_conf_wcs, rd_config)) { |
10040 | phba->cgn_reg_signal = EDC_CG_SIG_WARN_ONLY; |
10041 | phba->cgn_reg_fpin &= ~LPFC_CGN_FPIN_WARN; |
10042 | } |
10043 | if (bf_get(lpfc_mbx_rd_conf_acs, rd_config)) { |
10044 | /* MUST support both alarm and warning |
10045 | * because EDC does not support alarm alone. |
10046 | */ |
10047 | if (phba->cgn_reg_signal != |
10048 | EDC_CG_SIG_WARN_ONLY) { |
10049 | /* Must support both or none */ |
10050 | phba->cgn_reg_fpin = LPFC_CGN_FPIN_BOTH; |
10051 | phba->cgn_reg_signal = |
10052 | EDC_CG_SIG_NOTSUPPORTED; |
10053 | } else { |
10054 | phba->cgn_reg_signal = |
10055 | EDC_CG_SIG_WARN_ALARM; |
10056 | phba->cgn_reg_fpin = |
10057 | LPFC_CGN_FPIN_NONE; |
10058 | } |
10059 | } |
10060 | } |
10061 | |
10062 | /* Set the congestion initial signal and fpin values. */ |
10063 | phba->cgn_init_reg_fpin = phba->cgn_reg_fpin; |
10064 | phba->cgn_init_reg_signal = phba->cgn_reg_signal; |
10065 | |
10066 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
10067 | "6446 READ_CONFIG reg_sig x%x reg_fpin:x%x\n" , |
10068 | phba->cgn_reg_signal, phba->cgn_reg_fpin); |
10069 | |
10070 | lpfc_map_topology(phba, rd_config); |
10071 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
10072 | "2003 cfg params Extents? %d " |
10073 | "XRI(B:%d M:%d), " |
10074 | "VPI(B:%d M:%d) " |
10075 | "VFI(B:%d M:%d) " |
10076 | "RPI(B:%d M:%d) " |
10077 | "FCFI:%d EQ:%d CQ:%d WQ:%d RQ:%d lmt:x%x\n" , |
10078 | phba->sli4_hba.extents_in_use, |
10079 | phba->sli4_hba.max_cfg_param.xri_base, |
10080 | phba->sli4_hba.max_cfg_param.max_xri, |
10081 | phba->sli4_hba.max_cfg_param.vpi_base, |
10082 | phba->sli4_hba.max_cfg_param.max_vpi, |
10083 | phba->sli4_hba.max_cfg_param.vfi_base, |
10084 | phba->sli4_hba.max_cfg_param.max_vfi, |
10085 | phba->sli4_hba.max_cfg_param.rpi_base, |
10086 | phba->sli4_hba.max_cfg_param.max_rpi, |
10087 | phba->sli4_hba.max_cfg_param.max_fcfi, |
10088 | phba->sli4_hba.max_cfg_param.max_eq, |
10089 | phba->sli4_hba.max_cfg_param.max_cq, |
10090 | phba->sli4_hba.max_cfg_param.max_wq, |
10091 | phba->sli4_hba.max_cfg_param.max_rq, |
10092 | phba->lmt); |
10093 | |
10094 | /* |
10095 | * Calculate queue resources based on how |
10096 | * many WQ/CQ/EQs are available. |
10097 | */ |
10098 | qmin = phba->sli4_hba.max_cfg_param.max_wq; |
10099 | if (phba->sli4_hba.max_cfg_param.max_cq < qmin) |
10100 | qmin = phba->sli4_hba.max_cfg_param.max_cq; |
10101 | /* |
10102 | * Reserve 4 (ELS, NVME LS, MBOX, plus one extra) and |
10103 | * the remainder can be used for NVME / FCP. |
10104 | */ |
10105 | qmin -= 4; |
10106 | if (phba->sli4_hba.max_cfg_param.max_eq < qmin) |
10107 | qmin = phba->sli4_hba.max_cfg_param.max_eq; |
10108 | |
10109 | /* Check to see if there is enough for default cfg */ |
10110 | if ((phba->cfg_irq_chann > qmin) || |
10111 | (phba->cfg_hdw_queue > qmin)) { |
10112 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10113 | "2005 Reducing Queues - " |
10114 | "FW resource limitation: " |
10115 | "WQ %d CQ %d EQ %d: min %d: " |
10116 | "IRQ %d HDWQ %d\n" , |
10117 | phba->sli4_hba.max_cfg_param.max_wq, |
10118 | phba->sli4_hba.max_cfg_param.max_cq, |
10119 | phba->sli4_hba.max_cfg_param.max_eq, |
10120 | qmin, phba->cfg_irq_chann, |
10121 | phba->cfg_hdw_queue); |
10122 | |
10123 | if (phba->cfg_irq_chann > qmin) |
10124 | phba->cfg_irq_chann = qmin; |
10125 | if (phba->cfg_hdw_queue > qmin) |
10126 | phba->cfg_hdw_queue = qmin; |
10127 | } |
10128 | } |
10129 | |
10130 | if (rc) |
10131 | goto read_cfg_out; |
10132 | |
10133 | /* Update link speed if forced link speed is supported */ |
10134 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
10135 | if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) { |
10136 | forced_link_speed = |
10137 | bf_get(lpfc_mbx_rd_conf_link_speed, rd_config); |
10138 | if (forced_link_speed) { |
10139 | phba->hba_flag |= HBA_FORCED_LINK_SPEED; |
10140 | |
10141 | switch (forced_link_speed) { |
10142 | case LINK_SPEED_1G: |
10143 | phba->cfg_link_speed = |
10144 | LPFC_USER_LINK_SPEED_1G; |
10145 | break; |
10146 | case LINK_SPEED_2G: |
10147 | phba->cfg_link_speed = |
10148 | LPFC_USER_LINK_SPEED_2G; |
10149 | break; |
10150 | case LINK_SPEED_4G: |
10151 | phba->cfg_link_speed = |
10152 | LPFC_USER_LINK_SPEED_4G; |
10153 | break; |
10154 | case LINK_SPEED_8G: |
10155 | phba->cfg_link_speed = |
10156 | LPFC_USER_LINK_SPEED_8G; |
10157 | break; |
10158 | case LINK_SPEED_10G: |
10159 | phba->cfg_link_speed = |
10160 | LPFC_USER_LINK_SPEED_10G; |
10161 | break; |
10162 | case LINK_SPEED_16G: |
10163 | phba->cfg_link_speed = |
10164 | LPFC_USER_LINK_SPEED_16G; |
10165 | break; |
10166 | case LINK_SPEED_32G: |
10167 | phba->cfg_link_speed = |
10168 | LPFC_USER_LINK_SPEED_32G; |
10169 | break; |
10170 | case LINK_SPEED_64G: |
10171 | phba->cfg_link_speed = |
10172 | LPFC_USER_LINK_SPEED_64G; |
10173 | break; |
10174 | case 0xffff: |
10175 | phba->cfg_link_speed = |
10176 | LPFC_USER_LINK_SPEED_AUTO; |
10177 | break; |
10178 | default: |
10179 | lpfc_printf_log(phba, KERN_ERR, |
10180 | LOG_TRACE_EVENT, |
10181 | "0047 Unrecognized link " |
10182 | "speed : %d\n" , |
10183 | forced_link_speed); |
10184 | phba->cfg_link_speed = |
10185 | LPFC_USER_LINK_SPEED_AUTO; |
10186 | } |
10187 | } |
10188 | } |
10189 | |
10190 | /* Reset the DFT_HBA_Q_DEPTH to the max xri */ |
10191 | length = phba->sli4_hba.max_cfg_param.max_xri - |
10192 | lpfc_sli4_get_els_iocb_cnt(phba); |
10193 | if (phba->cfg_hba_queue_depth > length) { |
10194 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
10195 | "3361 HBA queue depth changed from %d to %d\n" , |
10196 | phba->cfg_hba_queue_depth, length); |
10197 | phba->cfg_hba_queue_depth = length; |
10198 | } |
10199 | |
10200 | if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) < |
10201 | LPFC_SLI_INTF_IF_TYPE_2) |
10202 | goto read_cfg_out; |
10203 | |
10204 | /* get the pf# and vf# for SLI4 if_type 2 port */ |
10205 | length = (sizeof(struct lpfc_mbx_get_func_cfg) - |
10206 | sizeof(struct lpfc_sli4_cfg_mhdr)); |
10207 | lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON, |
10208 | LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG, |
10209 | length, LPFC_SLI4_MBX_EMBED); |
10210 | |
10211 | rc2 = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
10212 | shdr = (union lpfc_sli4_cfg_shdr *) |
10213 | &pmb->u.mqe.un.sli4_config.header.cfg_shdr; |
10214 | shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); |
10215 | shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); |
10216 | if (rc2 || shdr_status || shdr_add_status) { |
10217 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10218 | "3026 Mailbox failed , mbxCmd x%x " |
10219 | "GET_FUNCTION_CONFIG, mbxStatus x%x\n" , |
10220 | bf_get(lpfc_mqe_command, &pmb->u.mqe), |
10221 | bf_get(lpfc_mqe_status, &pmb->u.mqe)); |
10222 | goto read_cfg_out; |
10223 | } |
10224 | |
10225 | /* search for fc_fcoe resrouce descriptor */ |
10226 | get_func_cfg = &pmb->u.mqe.un.get_func_cfg; |
10227 | |
10228 | pdesc_0 = (char *)&get_func_cfg->func_cfg.desc[0]; |
10229 | desc = (struct lpfc_rsrc_desc_fcfcoe *)pdesc_0; |
10230 | length = bf_get(lpfc_rsrc_desc_fcfcoe_length, desc); |
10231 | if (length == LPFC_RSRC_DESC_TYPE_FCFCOE_V0_RSVD) |
10232 | length = LPFC_RSRC_DESC_TYPE_FCFCOE_V0_LENGTH; |
10233 | else if (length != LPFC_RSRC_DESC_TYPE_FCFCOE_V1_LENGTH) |
10234 | goto read_cfg_out; |
10235 | |
10236 | for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) { |
10237 | desc = (struct lpfc_rsrc_desc_fcfcoe *)(pdesc_0 + length * i); |
10238 | if (LPFC_RSRC_DESC_TYPE_FCFCOE == |
10239 | bf_get(lpfc_rsrc_desc_fcfcoe_type, desc)) { |
10240 | phba->sli4_hba.iov.pf_number = |
10241 | bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc); |
10242 | phba->sli4_hba.iov.vf_number = |
10243 | bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc); |
10244 | break; |
10245 | } |
10246 | } |
10247 | |
10248 | if (i < LPFC_RSRC_DESC_MAX_NUM) |
10249 | lpfc_printf_log(phba, KERN_INFO, LOG_SLI, |
10250 | "3027 GET_FUNCTION_CONFIG: pf_number:%d, " |
10251 | "vf_number:%d\n" , phba->sli4_hba.iov.pf_number, |
10252 | phba->sli4_hba.iov.vf_number); |
10253 | else |
10254 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10255 | "3028 GET_FUNCTION_CONFIG: failed to find " |
10256 | "Resource Descriptor:x%x\n" , |
10257 | LPFC_RSRC_DESC_TYPE_FCFCOE); |
10258 | |
10259 | read_cfg_out: |
10260 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
10261 | return rc; |
10262 | } |
10263 | |
10264 | /** |
10265 | * lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port. |
10266 | * @phba: pointer to lpfc hba data structure. |
10267 | * |
10268 | * This routine is invoked to setup the port-side endian order when |
10269 | * the port if_type is 0. This routine has no function for other |
10270 | * if_types. |
10271 | * |
10272 | * Return codes |
10273 | * 0 - successful |
10274 | * -ENOMEM - No available memory |
10275 | * -EIO - The mailbox failed to complete successfully. |
10276 | **/ |
10277 | static int |
10278 | lpfc_setup_endian_order(struct lpfc_hba *phba) |
10279 | { |
10280 | LPFC_MBOXQ_t *mboxq; |
10281 | uint32_t if_type, rc = 0; |
10282 | uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0, |
10283 | HOST_ENDIAN_HIGH_WORD1}; |
10284 | |
10285 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
10286 | switch (if_type) { |
10287 | case LPFC_SLI_INTF_IF_TYPE_0: |
10288 | mboxq = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, |
10289 | GFP_KERNEL); |
10290 | if (!mboxq) { |
10291 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10292 | "0492 Unable to allocate memory for " |
10293 | "issuing SLI_CONFIG_SPECIAL mailbox " |
10294 | "command\n" ); |
10295 | return -ENOMEM; |
10296 | } |
10297 | |
10298 | /* |
10299 | * The SLI4_CONFIG_SPECIAL mailbox command requires the first |
10300 | * two words to contain special data values and no other data. |
10301 | */ |
10302 | memset(mboxq, 0, sizeof(LPFC_MBOXQ_t)); |
10303 | memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data)); |
10304 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
10305 | if (rc != MBX_SUCCESS) { |
10306 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10307 | "0493 SLI_CONFIG_SPECIAL mailbox " |
10308 | "failed with status x%x\n" , |
10309 | rc); |
10310 | rc = -EIO; |
10311 | } |
10312 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
10313 | break; |
10314 | case LPFC_SLI_INTF_IF_TYPE_6: |
10315 | case LPFC_SLI_INTF_IF_TYPE_2: |
10316 | case LPFC_SLI_INTF_IF_TYPE_1: |
10317 | default: |
10318 | break; |
10319 | } |
10320 | return rc; |
10321 | } |
10322 | |
10323 | /** |
10324 | * lpfc_sli4_queue_verify - Verify and update EQ counts |
10325 | * @phba: pointer to lpfc hba data structure. |
10326 | * |
10327 | * This routine is invoked to check the user settable queue counts for EQs. |
10328 | * After this routine is called the counts will be set to valid values that |
10329 | * adhere to the constraints of the system's interrupt vectors and the port's |
10330 | * queue resources. |
10331 | * |
10332 | * Return codes |
10333 | * 0 - successful |
10334 | * -ENOMEM - No available memory |
10335 | **/ |
10336 | static int |
10337 | lpfc_sli4_queue_verify(struct lpfc_hba *phba) |
10338 | { |
10339 | /* |
10340 | * Sanity check for configured queue parameters against the run-time |
10341 | * device parameters |
10342 | */ |
10343 | |
10344 | if (phba->nvmet_support) { |
10345 | if (phba->cfg_hdw_queue < phba->cfg_nvmet_mrq) |
10346 | phba->cfg_nvmet_mrq = phba->cfg_hdw_queue; |
10347 | if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX) |
10348 | phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX; |
10349 | } |
10350 | |
10351 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
10352 | "2574 IO channels: hdwQ %d IRQ %d MRQ: %d\n" , |
10353 | phba->cfg_hdw_queue, phba->cfg_irq_chann, |
10354 | phba->cfg_nvmet_mrq); |
10355 | |
10356 | /* Get EQ depth from module parameter, fake the default for now */ |
10357 | phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B; |
10358 | phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT; |
10359 | |
10360 | /* Get CQ depth from module parameter, fake the default for now */ |
10361 | phba->sli4_hba.cq_esize = LPFC_CQE_SIZE; |
10362 | phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT; |
10363 | return 0; |
10364 | } |
10365 | |
10366 | static int |
10367 | lpfc_alloc_io_wq_cq(struct lpfc_hba *phba, int idx) |
10368 | { |
10369 | struct lpfc_queue *qdesc; |
10370 | u32 wqesize; |
10371 | int cpu; |
10372 | |
10373 | cpu = lpfc_find_cpu_handle(phba, idx, LPFC_FIND_BY_HDWQ); |
10374 | /* Create Fast Path IO CQs */ |
10375 | if (phba->enab_exp_wqcq_pages) |
10376 | /* Increase the CQ size when WQEs contain an embedded cdb */ |
10377 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE, |
10378 | entry_size: phba->sli4_hba.cq_esize, |
10379 | LPFC_CQE_EXP_COUNT, cpu); |
10380 | |
10381 | else |
10382 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10383 | entry_size: phba->sli4_hba.cq_esize, |
10384 | entry_count: phba->sli4_hba.cq_ecount, cpu); |
10385 | if (!qdesc) { |
10386 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10387 | "0499 Failed allocate fast-path IO CQ (%d)\n" , |
10388 | idx); |
10389 | return 1; |
10390 | } |
10391 | qdesc->qe_valid = 1; |
10392 | qdesc->hdwq = idx; |
10393 | qdesc->chann = cpu; |
10394 | phba->sli4_hba.hdwq[idx].io_cq = qdesc; |
10395 | |
10396 | /* Create Fast Path IO WQs */ |
10397 | if (phba->enab_exp_wqcq_pages) { |
10398 | /* Increase the WQ size when WQEs contain an embedded cdb */ |
10399 | wqesize = (phba->fcp_embed_io) ? |
10400 | LPFC_WQE128_SIZE : phba->sli4_hba.wq_esize; |
10401 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_EXPANDED_PAGE_SIZE, |
10402 | entry_size: wqesize, |
10403 | LPFC_WQE_EXP_COUNT, cpu); |
10404 | } else |
10405 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10406 | entry_size: phba->sli4_hba.wq_esize, |
10407 | entry_count: phba->sli4_hba.wq_ecount, cpu); |
10408 | |
10409 | if (!qdesc) { |
10410 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10411 | "0503 Failed allocate fast-path IO WQ (%d)\n" , |
10412 | idx); |
10413 | return 1; |
10414 | } |
10415 | qdesc->hdwq = idx; |
10416 | qdesc->chann = cpu; |
10417 | phba->sli4_hba.hdwq[idx].io_wq = qdesc; |
10418 | list_add_tail(new: &qdesc->wq_list, head: &phba->sli4_hba.lpfc_wq_list); |
10419 | return 0; |
10420 | } |
10421 | |
10422 | /** |
10423 | * lpfc_sli4_queue_create - Create all the SLI4 queues |
10424 | * @phba: pointer to lpfc hba data structure. |
10425 | * |
10426 | * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA |
10427 | * operation. For each SLI4 queue type, the parameters such as queue entry |
10428 | * count (queue depth) shall be taken from the module parameter. For now, |
10429 | * we just use some constant number as place holder. |
10430 | * |
10431 | * Return codes |
10432 | * 0 - successful |
10433 | * -ENOMEM - No availble memory |
10434 | * -EIO - The mailbox failed to complete successfully. |
10435 | **/ |
10436 | int |
10437 | lpfc_sli4_queue_create(struct lpfc_hba *phba) |
10438 | { |
10439 | struct lpfc_queue *qdesc; |
10440 | int idx, cpu, eqcpu; |
10441 | struct lpfc_sli4_hdw_queue *qp; |
10442 | struct lpfc_vector_map_info *cpup; |
10443 | struct lpfc_vector_map_info *eqcpup; |
10444 | struct lpfc_eq_intr_info *eqi; |
10445 | |
10446 | /* |
10447 | * Create HBA Record arrays. |
10448 | * Both NVME and FCP will share that same vectors / EQs |
10449 | */ |
10450 | phba->sli4_hba.mq_esize = LPFC_MQE_SIZE; |
10451 | phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT; |
10452 | phba->sli4_hba.wq_esize = LPFC_WQE_SIZE; |
10453 | phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT; |
10454 | phba->sli4_hba.rq_esize = LPFC_RQE_SIZE; |
10455 | phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT; |
10456 | phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B; |
10457 | phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT; |
10458 | phba->sli4_hba.cq_esize = LPFC_CQE_SIZE; |
10459 | phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT; |
10460 | |
10461 | if (!phba->sli4_hba.hdwq) { |
10462 | phba->sli4_hba.hdwq = kcalloc( |
10463 | n: phba->cfg_hdw_queue, size: sizeof(struct lpfc_sli4_hdw_queue), |
10464 | GFP_KERNEL); |
10465 | if (!phba->sli4_hba.hdwq) { |
10466 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10467 | "6427 Failed allocate memory for " |
10468 | "fast-path Hardware Queue array\n" ); |
10469 | goto out_error; |
10470 | } |
10471 | /* Prepare hardware queues to take IO buffers */ |
10472 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
10473 | qp = &phba->sli4_hba.hdwq[idx]; |
10474 | spin_lock_init(&qp->io_buf_list_get_lock); |
10475 | spin_lock_init(&qp->io_buf_list_put_lock); |
10476 | INIT_LIST_HEAD(list: &qp->lpfc_io_buf_list_get); |
10477 | INIT_LIST_HEAD(list: &qp->lpfc_io_buf_list_put); |
10478 | qp->get_io_bufs = 0; |
10479 | qp->put_io_bufs = 0; |
10480 | qp->total_io_bufs = 0; |
10481 | spin_lock_init(&qp->abts_io_buf_list_lock); |
10482 | INIT_LIST_HEAD(list: &qp->lpfc_abts_io_buf_list); |
10483 | qp->abts_scsi_io_bufs = 0; |
10484 | qp->abts_nvme_io_bufs = 0; |
10485 | INIT_LIST_HEAD(list: &qp->sgl_list); |
10486 | INIT_LIST_HEAD(list: &qp->cmd_rsp_buf_list); |
10487 | spin_lock_init(&qp->hdwq_lock); |
10488 | } |
10489 | } |
10490 | |
10491 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
10492 | if (phba->nvmet_support) { |
10493 | phba->sli4_hba.nvmet_cqset = kcalloc( |
10494 | n: phba->cfg_nvmet_mrq, |
10495 | size: sizeof(struct lpfc_queue *), |
10496 | GFP_KERNEL); |
10497 | if (!phba->sli4_hba.nvmet_cqset) { |
10498 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10499 | "3121 Fail allocate memory for " |
10500 | "fast-path CQ set array\n" ); |
10501 | goto out_error; |
10502 | } |
10503 | phba->sli4_hba.nvmet_mrq_hdr = kcalloc( |
10504 | n: phba->cfg_nvmet_mrq, |
10505 | size: sizeof(struct lpfc_queue *), |
10506 | GFP_KERNEL); |
10507 | if (!phba->sli4_hba.nvmet_mrq_hdr) { |
10508 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10509 | "3122 Fail allocate memory for " |
10510 | "fast-path RQ set hdr array\n" ); |
10511 | goto out_error; |
10512 | } |
10513 | phba->sli4_hba.nvmet_mrq_data = kcalloc( |
10514 | n: phba->cfg_nvmet_mrq, |
10515 | size: sizeof(struct lpfc_queue *), |
10516 | GFP_KERNEL); |
10517 | if (!phba->sli4_hba.nvmet_mrq_data) { |
10518 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10519 | "3124 Fail allocate memory for " |
10520 | "fast-path RQ set data array\n" ); |
10521 | goto out_error; |
10522 | } |
10523 | } |
10524 | } |
10525 | |
10526 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_wq_list); |
10527 | |
10528 | /* Create HBA Event Queues (EQs) */ |
10529 | for_each_present_cpu(cpu) { |
10530 | /* We only want to create 1 EQ per vector, even though |
10531 | * multiple CPUs might be using that vector. so only |
10532 | * selects the CPUs that are LPFC_CPU_FIRST_IRQ. |
10533 | */ |
10534 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
10535 | if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) |
10536 | continue; |
10537 | |
10538 | /* Get a ptr to the Hardware Queue associated with this CPU */ |
10539 | qp = &phba->sli4_hba.hdwq[cpup->hdwq]; |
10540 | |
10541 | /* Allocate an EQ */ |
10542 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10543 | entry_size: phba->sli4_hba.eq_esize, |
10544 | entry_count: phba->sli4_hba.eq_ecount, cpu); |
10545 | if (!qdesc) { |
10546 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10547 | "0497 Failed allocate EQ (%d)\n" , |
10548 | cpup->hdwq); |
10549 | goto out_error; |
10550 | } |
10551 | qdesc->qe_valid = 1; |
10552 | qdesc->hdwq = cpup->hdwq; |
10553 | qdesc->chann = cpu; /* First CPU this EQ is affinitized to */ |
10554 | qdesc->last_cpu = qdesc->chann; |
10555 | |
10556 | /* Save the allocated EQ in the Hardware Queue */ |
10557 | qp->hba_eq = qdesc; |
10558 | |
10559 | eqi = per_cpu_ptr(phba->sli4_hba.eq_info, qdesc->last_cpu); |
10560 | list_add(new: &qdesc->cpu_list, head: &eqi->list); |
10561 | } |
10562 | |
10563 | /* Now we need to populate the other Hardware Queues, that share |
10564 | * an IRQ vector, with the associated EQ ptr. |
10565 | */ |
10566 | for_each_present_cpu(cpu) { |
10567 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
10568 | |
10569 | /* Check for EQ already allocated in previous loop */ |
10570 | if (cpup->flag & LPFC_CPU_FIRST_IRQ) |
10571 | continue; |
10572 | |
10573 | /* Check for multiple CPUs per hdwq */ |
10574 | qp = &phba->sli4_hba.hdwq[cpup->hdwq]; |
10575 | if (qp->hba_eq) |
10576 | continue; |
10577 | |
10578 | /* We need to share an EQ for this hdwq */ |
10579 | eqcpu = lpfc_find_cpu_handle(phba, cpup->eq, LPFC_FIND_BY_EQ); |
10580 | eqcpup = &phba->sli4_hba.cpu_map[eqcpu]; |
10581 | qp->hba_eq = phba->sli4_hba.hdwq[eqcpup->hdwq].hba_eq; |
10582 | } |
10583 | |
10584 | /* Allocate IO Path SLI4 CQ/WQs */ |
10585 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
10586 | if (lpfc_alloc_io_wq_cq(phba, idx)) |
10587 | goto out_error; |
10588 | } |
10589 | |
10590 | if (phba->nvmet_support) { |
10591 | for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) { |
10592 | cpu = lpfc_find_cpu_handle(phba, idx, |
10593 | LPFC_FIND_BY_HDWQ); |
10594 | qdesc = lpfc_sli4_queue_alloc(phba, |
10595 | LPFC_DEFAULT_PAGE_SIZE, |
10596 | entry_size: phba->sli4_hba.cq_esize, |
10597 | entry_count: phba->sli4_hba.cq_ecount, |
10598 | cpu); |
10599 | if (!qdesc) { |
10600 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10601 | "3142 Failed allocate NVME " |
10602 | "CQ Set (%d)\n" , idx); |
10603 | goto out_error; |
10604 | } |
10605 | qdesc->qe_valid = 1; |
10606 | qdesc->hdwq = idx; |
10607 | qdesc->chann = cpu; |
10608 | phba->sli4_hba.nvmet_cqset[idx] = qdesc; |
10609 | } |
10610 | } |
10611 | |
10612 | /* |
10613 | * Create Slow Path Completion Queues (CQs) |
10614 | */ |
10615 | |
10616 | cpu = lpfc_find_cpu_handle(phba, 0, LPFC_FIND_BY_EQ); |
10617 | /* Create slow-path Mailbox Command Complete Queue */ |
10618 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10619 | entry_size: phba->sli4_hba.cq_esize, |
10620 | entry_count: phba->sli4_hba.cq_ecount, cpu); |
10621 | if (!qdesc) { |
10622 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10623 | "0500 Failed allocate slow-path mailbox CQ\n" ); |
10624 | goto out_error; |
10625 | } |
10626 | qdesc->qe_valid = 1; |
10627 | phba->sli4_hba.mbx_cq = qdesc; |
10628 | |
10629 | /* Create slow-path ELS Complete Queue */ |
10630 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10631 | entry_size: phba->sli4_hba.cq_esize, |
10632 | entry_count: phba->sli4_hba.cq_ecount, cpu); |
10633 | if (!qdesc) { |
10634 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10635 | "0501 Failed allocate slow-path ELS CQ\n" ); |
10636 | goto out_error; |
10637 | } |
10638 | qdesc->qe_valid = 1; |
10639 | qdesc->chann = cpu; |
10640 | phba->sli4_hba.els_cq = qdesc; |
10641 | |
10642 | |
10643 | /* |
10644 | * Create Slow Path Work Queues (WQs) |
10645 | */ |
10646 | |
10647 | /* Create Mailbox Command Queue */ |
10648 | |
10649 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10650 | entry_size: phba->sli4_hba.mq_esize, |
10651 | entry_count: phba->sli4_hba.mq_ecount, cpu); |
10652 | if (!qdesc) { |
10653 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10654 | "0505 Failed allocate slow-path MQ\n" ); |
10655 | goto out_error; |
10656 | } |
10657 | qdesc->chann = cpu; |
10658 | phba->sli4_hba.mbx_wq = qdesc; |
10659 | |
10660 | /* |
10661 | * Create ELS Work Queues |
10662 | */ |
10663 | |
10664 | /* Create slow-path ELS Work Queue */ |
10665 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10666 | entry_size: phba->sli4_hba.wq_esize, |
10667 | entry_count: phba->sli4_hba.wq_ecount, cpu); |
10668 | if (!qdesc) { |
10669 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10670 | "0504 Failed allocate slow-path ELS WQ\n" ); |
10671 | goto out_error; |
10672 | } |
10673 | qdesc->chann = cpu; |
10674 | phba->sli4_hba.els_wq = qdesc; |
10675 | list_add_tail(new: &qdesc->wq_list, head: &phba->sli4_hba.lpfc_wq_list); |
10676 | |
10677 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
10678 | /* Create NVME LS Complete Queue */ |
10679 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10680 | entry_size: phba->sli4_hba.cq_esize, |
10681 | entry_count: phba->sli4_hba.cq_ecount, cpu); |
10682 | if (!qdesc) { |
10683 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10684 | "6079 Failed allocate NVME LS CQ\n" ); |
10685 | goto out_error; |
10686 | } |
10687 | qdesc->chann = cpu; |
10688 | qdesc->qe_valid = 1; |
10689 | phba->sli4_hba.nvmels_cq = qdesc; |
10690 | |
10691 | /* Create NVME LS Work Queue */ |
10692 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10693 | entry_size: phba->sli4_hba.wq_esize, |
10694 | entry_count: phba->sli4_hba.wq_ecount, cpu); |
10695 | if (!qdesc) { |
10696 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10697 | "6080 Failed allocate NVME LS WQ\n" ); |
10698 | goto out_error; |
10699 | } |
10700 | qdesc->chann = cpu; |
10701 | phba->sli4_hba.nvmels_wq = qdesc; |
10702 | list_add_tail(new: &qdesc->wq_list, head: &phba->sli4_hba.lpfc_wq_list); |
10703 | } |
10704 | |
10705 | /* |
10706 | * Create Receive Queue (RQ) |
10707 | */ |
10708 | |
10709 | /* Create Receive Queue for header */ |
10710 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10711 | entry_size: phba->sli4_hba.rq_esize, |
10712 | entry_count: phba->sli4_hba.rq_ecount, cpu); |
10713 | if (!qdesc) { |
10714 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10715 | "0506 Failed allocate receive HRQ\n" ); |
10716 | goto out_error; |
10717 | } |
10718 | phba->sli4_hba.hdr_rq = qdesc; |
10719 | |
10720 | /* Create Receive Queue for data */ |
10721 | qdesc = lpfc_sli4_queue_alloc(phba, LPFC_DEFAULT_PAGE_SIZE, |
10722 | entry_size: phba->sli4_hba.rq_esize, |
10723 | entry_count: phba->sli4_hba.rq_ecount, cpu); |
10724 | if (!qdesc) { |
10725 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10726 | "0507 Failed allocate receive DRQ\n" ); |
10727 | goto out_error; |
10728 | } |
10729 | phba->sli4_hba.dat_rq = qdesc; |
10730 | |
10731 | if ((phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) && |
10732 | phba->nvmet_support) { |
10733 | for (idx = 0; idx < phba->cfg_nvmet_mrq; idx++) { |
10734 | cpu = lpfc_find_cpu_handle(phba, idx, |
10735 | LPFC_FIND_BY_HDWQ); |
10736 | /* Create NVMET Receive Queue for header */ |
10737 | qdesc = lpfc_sli4_queue_alloc(phba, |
10738 | LPFC_DEFAULT_PAGE_SIZE, |
10739 | entry_size: phba->sli4_hba.rq_esize, |
10740 | LPFC_NVMET_RQE_DEF_COUNT, |
10741 | cpu); |
10742 | if (!qdesc) { |
10743 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10744 | "3146 Failed allocate " |
10745 | "receive HRQ\n" ); |
10746 | goto out_error; |
10747 | } |
10748 | qdesc->hdwq = idx; |
10749 | phba->sli4_hba.nvmet_mrq_hdr[idx] = qdesc; |
10750 | |
10751 | /* Only needed for header of RQ pair */ |
10752 | qdesc->rqbp = kzalloc_node(size: sizeof(*qdesc->rqbp), |
10753 | GFP_KERNEL, |
10754 | cpu_to_node(cpu)); |
10755 | if (qdesc->rqbp == NULL) { |
10756 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10757 | "6131 Failed allocate " |
10758 | "Header RQBP\n" ); |
10759 | goto out_error; |
10760 | } |
10761 | |
10762 | /* Put list in known state in case driver load fails. */ |
10763 | INIT_LIST_HEAD(list: &qdesc->rqbp->rqb_buffer_list); |
10764 | |
10765 | /* Create NVMET Receive Queue for data */ |
10766 | qdesc = lpfc_sli4_queue_alloc(phba, |
10767 | LPFC_DEFAULT_PAGE_SIZE, |
10768 | entry_size: phba->sli4_hba.rq_esize, |
10769 | LPFC_NVMET_RQE_DEF_COUNT, |
10770 | cpu); |
10771 | if (!qdesc) { |
10772 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10773 | "3156 Failed allocate " |
10774 | "receive DRQ\n" ); |
10775 | goto out_error; |
10776 | } |
10777 | qdesc->hdwq = idx; |
10778 | phba->sli4_hba.nvmet_mrq_data[idx] = qdesc; |
10779 | } |
10780 | } |
10781 | |
10782 | /* Clear NVME stats */ |
10783 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
10784 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
10785 | memset(&phba->sli4_hba.hdwq[idx].nvme_cstat, 0, |
10786 | sizeof(phba->sli4_hba.hdwq[idx].nvme_cstat)); |
10787 | } |
10788 | } |
10789 | |
10790 | /* Clear SCSI stats */ |
10791 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP) { |
10792 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
10793 | memset(&phba->sli4_hba.hdwq[idx].scsi_cstat, 0, |
10794 | sizeof(phba->sli4_hba.hdwq[idx].scsi_cstat)); |
10795 | } |
10796 | } |
10797 | |
10798 | return 0; |
10799 | |
10800 | out_error: |
10801 | lpfc_sli4_queue_destroy(phba); |
10802 | return -ENOMEM; |
10803 | } |
10804 | |
10805 | static inline void |
10806 | __lpfc_sli4_release_queue(struct lpfc_queue **qp) |
10807 | { |
10808 | if (*qp != NULL) { |
10809 | lpfc_sli4_queue_free(*qp); |
10810 | *qp = NULL; |
10811 | } |
10812 | } |
10813 | |
10814 | static inline void |
10815 | lpfc_sli4_release_queues(struct lpfc_queue ***qs, int max) |
10816 | { |
10817 | int idx; |
10818 | |
10819 | if (*qs == NULL) |
10820 | return; |
10821 | |
10822 | for (idx = 0; idx < max; idx++) |
10823 | __lpfc_sli4_release_queue(qp: &(*qs)[idx]); |
10824 | |
10825 | kfree(objp: *qs); |
10826 | *qs = NULL; |
10827 | } |
10828 | |
10829 | static inline void |
10830 | lpfc_sli4_release_hdwq(struct lpfc_hba *phba) |
10831 | { |
10832 | struct lpfc_sli4_hdw_queue *hdwq; |
10833 | struct lpfc_queue *eq; |
10834 | uint32_t idx; |
10835 | |
10836 | hdwq = phba->sli4_hba.hdwq; |
10837 | |
10838 | /* Loop thru all Hardware Queues */ |
10839 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
10840 | /* Free the CQ/WQ corresponding to the Hardware Queue */ |
10841 | lpfc_sli4_queue_free(hdwq[idx].io_cq); |
10842 | lpfc_sli4_queue_free(hdwq[idx].io_wq); |
10843 | hdwq[idx].hba_eq = NULL; |
10844 | hdwq[idx].io_cq = NULL; |
10845 | hdwq[idx].io_wq = NULL; |
10846 | if (phba->cfg_xpsgl && !phba->nvmet_support) |
10847 | lpfc_free_sgl_per_hdwq(phba, hdwq: &hdwq[idx]); |
10848 | lpfc_free_cmd_rsp_buf_per_hdwq(phba, hdwq: &hdwq[idx]); |
10849 | } |
10850 | /* Loop thru all IRQ vectors */ |
10851 | for (idx = 0; idx < phba->cfg_irq_chann; idx++) { |
10852 | /* Free the EQ corresponding to the IRQ vector */ |
10853 | eq = phba->sli4_hba.hba_eq_hdl[idx].eq; |
10854 | lpfc_sli4_queue_free(eq); |
10855 | phba->sli4_hba.hba_eq_hdl[idx].eq = NULL; |
10856 | } |
10857 | } |
10858 | |
10859 | /** |
10860 | * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues |
10861 | * @phba: pointer to lpfc hba data structure. |
10862 | * |
10863 | * This routine is invoked to release all the SLI4 queues with the FCoE HBA |
10864 | * operation. |
10865 | * |
10866 | * Return codes |
10867 | * 0 - successful |
10868 | * -ENOMEM - No available memory |
10869 | * -EIO - The mailbox failed to complete successfully. |
10870 | **/ |
10871 | void |
10872 | lpfc_sli4_queue_destroy(struct lpfc_hba *phba) |
10873 | { |
10874 | /* |
10875 | * Set FREE_INIT before beginning to free the queues. |
10876 | * Wait until the users of queues to acknowledge to |
10877 | * release queues by clearing FREE_WAIT. |
10878 | */ |
10879 | spin_lock_irq(lock: &phba->hbalock); |
10880 | phba->sli.sli_flag |= LPFC_QUEUE_FREE_INIT; |
10881 | while (phba->sli.sli_flag & LPFC_QUEUE_FREE_WAIT) { |
10882 | spin_unlock_irq(lock: &phba->hbalock); |
10883 | msleep(msecs: 20); |
10884 | spin_lock_irq(lock: &phba->hbalock); |
10885 | } |
10886 | spin_unlock_irq(lock: &phba->hbalock); |
10887 | |
10888 | lpfc_sli4_cleanup_poll_list(phba); |
10889 | |
10890 | /* Release HBA eqs */ |
10891 | if (phba->sli4_hba.hdwq) |
10892 | lpfc_sli4_release_hdwq(phba); |
10893 | |
10894 | if (phba->nvmet_support) { |
10895 | lpfc_sli4_release_queues(qs: &phba->sli4_hba.nvmet_cqset, |
10896 | max: phba->cfg_nvmet_mrq); |
10897 | |
10898 | lpfc_sli4_release_queues(qs: &phba->sli4_hba.nvmet_mrq_hdr, |
10899 | max: phba->cfg_nvmet_mrq); |
10900 | lpfc_sli4_release_queues(qs: &phba->sli4_hba.nvmet_mrq_data, |
10901 | max: phba->cfg_nvmet_mrq); |
10902 | } |
10903 | |
10904 | /* Release mailbox command work queue */ |
10905 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.mbx_wq); |
10906 | |
10907 | /* Release ELS work queue */ |
10908 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.els_wq); |
10909 | |
10910 | /* Release ELS work queue */ |
10911 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.nvmels_wq); |
10912 | |
10913 | /* Release unsolicited receive queue */ |
10914 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.hdr_rq); |
10915 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.dat_rq); |
10916 | |
10917 | /* Release ELS complete queue */ |
10918 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.els_cq); |
10919 | |
10920 | /* Release NVME LS complete queue */ |
10921 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.nvmels_cq); |
10922 | |
10923 | /* Release mailbox command complete queue */ |
10924 | __lpfc_sli4_release_queue(qp: &phba->sli4_hba.mbx_cq); |
10925 | |
10926 | /* Everything on this list has been freed */ |
10927 | INIT_LIST_HEAD(list: &phba->sli4_hba.lpfc_wq_list); |
10928 | |
10929 | /* Done with freeing the queues */ |
10930 | spin_lock_irq(lock: &phba->hbalock); |
10931 | phba->sli.sli_flag &= ~LPFC_QUEUE_FREE_INIT; |
10932 | spin_unlock_irq(lock: &phba->hbalock); |
10933 | } |
10934 | |
10935 | int |
10936 | lpfc_free_rq_buffer(struct lpfc_hba *phba, struct lpfc_queue *rq) |
10937 | { |
10938 | struct lpfc_rqb *rqbp; |
10939 | struct lpfc_dmabuf *h_buf; |
10940 | struct rqb_dmabuf *rqb_buffer; |
10941 | |
10942 | rqbp = rq->rqbp; |
10943 | while (!list_empty(head: &rqbp->rqb_buffer_list)) { |
10944 | list_remove_head(&rqbp->rqb_buffer_list, h_buf, |
10945 | struct lpfc_dmabuf, list); |
10946 | |
10947 | rqb_buffer = container_of(h_buf, struct rqb_dmabuf, hbuf); |
10948 | (rqbp->rqb_free_buffer)(phba, rqb_buffer); |
10949 | rqbp->buffer_count--; |
10950 | } |
10951 | return 1; |
10952 | } |
10953 | |
10954 | static int |
10955 | lpfc_create_wq_cq(struct lpfc_hba *phba, struct lpfc_queue *eq, |
10956 | struct lpfc_queue *cq, struct lpfc_queue *wq, uint16_t *cq_map, |
10957 | int qidx, uint32_t qtype) |
10958 | { |
10959 | struct lpfc_sli_ring *pring; |
10960 | int rc; |
10961 | |
10962 | if (!eq || !cq || !wq) { |
10963 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10964 | "6085 Fast-path %s (%d) not allocated\n" , |
10965 | ((eq) ? ((cq) ? "WQ" : "CQ" ) : "EQ" ), qidx); |
10966 | return -ENOMEM; |
10967 | } |
10968 | |
10969 | /* create the Cq first */ |
10970 | rc = lpfc_cq_create(phba, cq, eq, |
10971 | (qtype == LPFC_MBOX) ? LPFC_MCQ : LPFC_WCQ, qtype); |
10972 | if (rc) { |
10973 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10974 | "6086 Failed setup of CQ (%d), rc = 0x%x\n" , |
10975 | qidx, (uint32_t)rc); |
10976 | return rc; |
10977 | } |
10978 | |
10979 | if (qtype != LPFC_MBOX) { |
10980 | /* Setup cq_map for fast lookup */ |
10981 | if (cq_map) |
10982 | *cq_map = cq->queue_id; |
10983 | |
10984 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
10985 | "6087 CQ setup: cq[%d]-id=%d, parent eq[%d]-id=%d\n" , |
10986 | qidx, cq->queue_id, qidx, eq->queue_id); |
10987 | |
10988 | /* create the wq */ |
10989 | rc = lpfc_wq_create(phba, wq, cq, qtype); |
10990 | if (rc) { |
10991 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
10992 | "4618 Fail setup fastpath WQ (%d), rc = 0x%x\n" , |
10993 | qidx, (uint32_t)rc); |
10994 | /* no need to tear down cq - caller will do so */ |
10995 | return rc; |
10996 | } |
10997 | |
10998 | /* Bind this CQ/WQ to the NVME ring */ |
10999 | pring = wq->pring; |
11000 | pring->sli.sli4.wqp = (void *)wq; |
11001 | cq->pring = pring; |
11002 | |
11003 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11004 | "2593 WQ setup: wq[%d]-id=%d assoc=%d, cq[%d]-id=%d\n" , |
11005 | qidx, wq->queue_id, wq->assoc_qid, qidx, cq->queue_id); |
11006 | } else { |
11007 | rc = lpfc_mq_create(phba, wq, cq, LPFC_MBOX); |
11008 | if (rc) { |
11009 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11010 | "0539 Failed setup of slow-path MQ: " |
11011 | "rc = 0x%x\n" , rc); |
11012 | /* no need to tear down cq - caller will do so */ |
11013 | return rc; |
11014 | } |
11015 | |
11016 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11017 | "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n" , |
11018 | phba->sli4_hba.mbx_wq->queue_id, |
11019 | phba->sli4_hba.mbx_cq->queue_id); |
11020 | } |
11021 | |
11022 | return 0; |
11023 | } |
11024 | |
11025 | /** |
11026 | * lpfc_setup_cq_lookup - Setup the CQ lookup table |
11027 | * @phba: pointer to lpfc hba data structure. |
11028 | * |
11029 | * This routine will populate the cq_lookup table by all |
11030 | * available CQ queue_id's. |
11031 | **/ |
11032 | static void |
11033 | lpfc_setup_cq_lookup(struct lpfc_hba *phba) |
11034 | { |
11035 | struct lpfc_queue *eq, *childq; |
11036 | int qidx; |
11037 | |
11038 | memset(phba->sli4_hba.cq_lookup, 0, |
11039 | (sizeof(struct lpfc_queue *) * (phba->sli4_hba.cq_max + 1))); |
11040 | /* Loop thru all IRQ vectors */ |
11041 | for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { |
11042 | /* Get the EQ corresponding to the IRQ vector */ |
11043 | eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; |
11044 | if (!eq) |
11045 | continue; |
11046 | /* Loop through all CQs associated with that EQ */ |
11047 | list_for_each_entry(childq, &eq->child_list, list) { |
11048 | if (childq->queue_id > phba->sli4_hba.cq_max) |
11049 | continue; |
11050 | if (childq->subtype == LPFC_IO) |
11051 | phba->sli4_hba.cq_lookup[childq->queue_id] = |
11052 | childq; |
11053 | } |
11054 | } |
11055 | } |
11056 | |
11057 | /** |
11058 | * lpfc_sli4_queue_setup - Set up all the SLI4 queues |
11059 | * @phba: pointer to lpfc hba data structure. |
11060 | * |
11061 | * This routine is invoked to set up all the SLI4 queues for the FCoE HBA |
11062 | * operation. |
11063 | * |
11064 | * Return codes |
11065 | * 0 - successful |
11066 | * -ENOMEM - No available memory |
11067 | * -EIO - The mailbox failed to complete successfully. |
11068 | **/ |
11069 | int |
11070 | lpfc_sli4_queue_setup(struct lpfc_hba *phba) |
11071 | { |
11072 | uint32_t shdr_status, shdr_add_status; |
11073 | union lpfc_sli4_cfg_shdr *shdr; |
11074 | struct lpfc_vector_map_info *cpup; |
11075 | struct lpfc_sli4_hdw_queue *qp; |
11076 | LPFC_MBOXQ_t *mboxq; |
11077 | int qidx, cpu; |
11078 | uint32_t length, usdelay; |
11079 | int rc = -ENOMEM; |
11080 | |
11081 | /* Check for dual-ULP support */ |
11082 | mboxq = (LPFC_MBOXQ_t *)mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
11083 | if (!mboxq) { |
11084 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11085 | "3249 Unable to allocate memory for " |
11086 | "QUERY_FW_CFG mailbox command\n" ); |
11087 | return -ENOMEM; |
11088 | } |
11089 | length = (sizeof(struct lpfc_mbx_query_fw_config) - |
11090 | sizeof(struct lpfc_sli4_cfg_mhdr)); |
11091 | lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, |
11092 | LPFC_MBOX_OPCODE_QUERY_FW_CFG, |
11093 | length, LPFC_SLI4_MBX_EMBED); |
11094 | |
11095 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
11096 | |
11097 | shdr = (union lpfc_sli4_cfg_shdr *) |
11098 | &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; |
11099 | shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); |
11100 | shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); |
11101 | if (shdr_status || shdr_add_status || rc) { |
11102 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11103 | "3250 QUERY_FW_CFG mailbox failed with status " |
11104 | "x%x add_status x%x, mbx status x%x\n" , |
11105 | shdr_status, shdr_add_status, rc); |
11106 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
11107 | rc = -ENXIO; |
11108 | goto out_error; |
11109 | } |
11110 | |
11111 | phba->sli4_hba.fw_func_mode = |
11112 | mboxq->u.mqe.un.query_fw_cfg.rsp.function_mode; |
11113 | phba->sli4_hba.ulp0_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp0_mode; |
11114 | phba->sli4_hba.ulp1_mode = mboxq->u.mqe.un.query_fw_cfg.rsp.ulp1_mode; |
11115 | phba->sli4_hba.physical_port = |
11116 | mboxq->u.mqe.un.query_fw_cfg.rsp.physical_port; |
11117 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11118 | "3251 QUERY_FW_CFG: func_mode:x%x, ulp0_mode:x%x, " |
11119 | "ulp1_mode:x%x\n" , phba->sli4_hba.fw_func_mode, |
11120 | phba->sli4_hba.ulp0_mode, phba->sli4_hba.ulp1_mode); |
11121 | |
11122 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
11123 | |
11124 | /* |
11125 | * Set up HBA Event Queues (EQs) |
11126 | */ |
11127 | qp = phba->sli4_hba.hdwq; |
11128 | |
11129 | /* Set up HBA event queue */ |
11130 | if (!qp) { |
11131 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11132 | "3147 Fast-path EQs not allocated\n" ); |
11133 | rc = -ENOMEM; |
11134 | goto out_error; |
11135 | } |
11136 | |
11137 | /* Loop thru all IRQ vectors */ |
11138 | for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { |
11139 | /* Create HBA Event Queues (EQs) in order */ |
11140 | for_each_present_cpu(cpu) { |
11141 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
11142 | |
11143 | /* Look for the CPU thats using that vector with |
11144 | * LPFC_CPU_FIRST_IRQ set. |
11145 | */ |
11146 | if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) |
11147 | continue; |
11148 | if (qidx != cpup->eq) |
11149 | continue; |
11150 | |
11151 | /* Create an EQ for that vector */ |
11152 | rc = lpfc_eq_create(phba, qp[cpup->hdwq].hba_eq, |
11153 | phba->cfg_fcp_imax); |
11154 | if (rc) { |
11155 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11156 | "0523 Failed setup of fast-path" |
11157 | " EQ (%d), rc = 0x%x\n" , |
11158 | cpup->eq, (uint32_t)rc); |
11159 | goto out_destroy; |
11160 | } |
11161 | |
11162 | /* Save the EQ for that vector in the hba_eq_hdl */ |
11163 | phba->sli4_hba.hba_eq_hdl[cpup->eq].eq = |
11164 | qp[cpup->hdwq].hba_eq; |
11165 | |
11166 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11167 | "2584 HBA EQ setup: queue[%d]-id=%d\n" , |
11168 | cpup->eq, |
11169 | qp[cpup->hdwq].hba_eq->queue_id); |
11170 | } |
11171 | } |
11172 | |
11173 | /* Loop thru all Hardware Queues */ |
11174 | for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { |
11175 | cpu = lpfc_find_cpu_handle(phba, qidx, LPFC_FIND_BY_HDWQ); |
11176 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
11177 | |
11178 | /* Create the CQ/WQ corresponding to the Hardware Queue */ |
11179 | rc = lpfc_create_wq_cq(phba, |
11180 | eq: phba->sli4_hba.hdwq[cpup->hdwq].hba_eq, |
11181 | cq: qp[qidx].io_cq, |
11182 | wq: qp[qidx].io_wq, |
11183 | cq_map: &phba->sli4_hba.hdwq[qidx].io_cq_map, |
11184 | qidx, |
11185 | qtype: LPFC_IO); |
11186 | if (rc) { |
11187 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11188 | "0535 Failed to setup fastpath " |
11189 | "IO WQ/CQ (%d), rc = 0x%x\n" , |
11190 | qidx, (uint32_t)rc); |
11191 | goto out_destroy; |
11192 | } |
11193 | } |
11194 | |
11195 | /* |
11196 | * Set up Slow Path Complete Queues (CQs) |
11197 | */ |
11198 | |
11199 | /* Set up slow-path MBOX CQ/MQ */ |
11200 | |
11201 | if (!phba->sli4_hba.mbx_cq || !phba->sli4_hba.mbx_wq) { |
11202 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11203 | "0528 %s not allocated\n" , |
11204 | phba->sli4_hba.mbx_cq ? |
11205 | "Mailbox WQ" : "Mailbox CQ" ); |
11206 | rc = -ENOMEM; |
11207 | goto out_destroy; |
11208 | } |
11209 | |
11210 | rc = lpfc_create_wq_cq(phba, eq: qp[0].hba_eq, |
11211 | cq: phba->sli4_hba.mbx_cq, |
11212 | wq: phba->sli4_hba.mbx_wq, |
11213 | NULL, qidx: 0, qtype: LPFC_MBOX); |
11214 | if (rc) { |
11215 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11216 | "0529 Failed setup of mailbox WQ/CQ: rc = 0x%x\n" , |
11217 | (uint32_t)rc); |
11218 | goto out_destroy; |
11219 | } |
11220 | if (phba->nvmet_support) { |
11221 | if (!phba->sli4_hba.nvmet_cqset) { |
11222 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11223 | "3165 Fast-path NVME CQ Set " |
11224 | "array not allocated\n" ); |
11225 | rc = -ENOMEM; |
11226 | goto out_destroy; |
11227 | } |
11228 | if (phba->cfg_nvmet_mrq > 1) { |
11229 | rc = lpfc_cq_create_set(phba, |
11230 | cqp: phba->sli4_hba.nvmet_cqset, |
11231 | hdwq: qp, |
11232 | type: LPFC_WCQ, subtype: LPFC_NVMET); |
11233 | if (rc) { |
11234 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11235 | "3164 Failed setup of NVME CQ " |
11236 | "Set, rc = 0x%x\n" , |
11237 | (uint32_t)rc); |
11238 | goto out_destroy; |
11239 | } |
11240 | } else { |
11241 | /* Set up NVMET Receive Complete Queue */ |
11242 | rc = lpfc_cq_create(phba, phba->sli4_hba.nvmet_cqset[0], |
11243 | qp[0].hba_eq, |
11244 | LPFC_WCQ, LPFC_NVMET); |
11245 | if (rc) { |
11246 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11247 | "6089 Failed setup NVMET CQ: " |
11248 | "rc = 0x%x\n" , (uint32_t)rc); |
11249 | goto out_destroy; |
11250 | } |
11251 | phba->sli4_hba.nvmet_cqset[0]->chann = 0; |
11252 | |
11253 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11254 | "6090 NVMET CQ setup: cq-id=%d, " |
11255 | "parent eq-id=%d\n" , |
11256 | phba->sli4_hba.nvmet_cqset[0]->queue_id, |
11257 | qp[0].hba_eq->queue_id); |
11258 | } |
11259 | } |
11260 | |
11261 | /* Set up slow-path ELS WQ/CQ */ |
11262 | if (!phba->sli4_hba.els_cq || !phba->sli4_hba.els_wq) { |
11263 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11264 | "0530 ELS %s not allocated\n" , |
11265 | phba->sli4_hba.els_cq ? "WQ" : "CQ" ); |
11266 | rc = -ENOMEM; |
11267 | goto out_destroy; |
11268 | } |
11269 | rc = lpfc_create_wq_cq(phba, eq: qp[0].hba_eq, |
11270 | cq: phba->sli4_hba.els_cq, |
11271 | wq: phba->sli4_hba.els_wq, |
11272 | NULL, qidx: 0, qtype: LPFC_ELS); |
11273 | if (rc) { |
11274 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11275 | "0525 Failed setup of ELS WQ/CQ: rc = 0x%x\n" , |
11276 | (uint32_t)rc); |
11277 | goto out_destroy; |
11278 | } |
11279 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11280 | "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n" , |
11281 | phba->sli4_hba.els_wq->queue_id, |
11282 | phba->sli4_hba.els_cq->queue_id); |
11283 | |
11284 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
11285 | /* Set up NVME LS Complete Queue */ |
11286 | if (!phba->sli4_hba.nvmels_cq || !phba->sli4_hba.nvmels_wq) { |
11287 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11288 | "6091 LS %s not allocated\n" , |
11289 | phba->sli4_hba.nvmels_cq ? "WQ" : "CQ" ); |
11290 | rc = -ENOMEM; |
11291 | goto out_destroy; |
11292 | } |
11293 | rc = lpfc_create_wq_cq(phba, eq: qp[0].hba_eq, |
11294 | cq: phba->sli4_hba.nvmels_cq, |
11295 | wq: phba->sli4_hba.nvmels_wq, |
11296 | NULL, qidx: 0, qtype: LPFC_NVME_LS); |
11297 | if (rc) { |
11298 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11299 | "0526 Failed setup of NVVME LS WQ/CQ: " |
11300 | "rc = 0x%x\n" , (uint32_t)rc); |
11301 | goto out_destroy; |
11302 | } |
11303 | |
11304 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11305 | "6096 ELS WQ setup: wq-id=%d, " |
11306 | "parent cq-id=%d\n" , |
11307 | phba->sli4_hba.nvmels_wq->queue_id, |
11308 | phba->sli4_hba.nvmels_cq->queue_id); |
11309 | } |
11310 | |
11311 | /* |
11312 | * Create NVMET Receive Queue (RQ) |
11313 | */ |
11314 | if (phba->nvmet_support) { |
11315 | if ((!phba->sli4_hba.nvmet_cqset) || |
11316 | (!phba->sli4_hba.nvmet_mrq_hdr) || |
11317 | (!phba->sli4_hba.nvmet_mrq_data)) { |
11318 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11319 | "6130 MRQ CQ Queues not " |
11320 | "allocated\n" ); |
11321 | rc = -ENOMEM; |
11322 | goto out_destroy; |
11323 | } |
11324 | if (phba->cfg_nvmet_mrq > 1) { |
11325 | rc = lpfc_mrq_create(phba, |
11326 | hrqp: phba->sli4_hba.nvmet_mrq_hdr, |
11327 | drqp: phba->sli4_hba.nvmet_mrq_data, |
11328 | cqp: phba->sli4_hba.nvmet_cqset, |
11329 | subtype: LPFC_NVMET); |
11330 | if (rc) { |
11331 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11332 | "6098 Failed setup of NVMET " |
11333 | "MRQ: rc = 0x%x\n" , |
11334 | (uint32_t)rc); |
11335 | goto out_destroy; |
11336 | } |
11337 | |
11338 | } else { |
11339 | rc = lpfc_rq_create(phba, |
11340 | phba->sli4_hba.nvmet_mrq_hdr[0], |
11341 | phba->sli4_hba.nvmet_mrq_data[0], |
11342 | phba->sli4_hba.nvmet_cqset[0], |
11343 | LPFC_NVMET); |
11344 | if (rc) { |
11345 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11346 | "6057 Failed setup of NVMET " |
11347 | "Receive Queue: rc = 0x%x\n" , |
11348 | (uint32_t)rc); |
11349 | goto out_destroy; |
11350 | } |
11351 | |
11352 | lpfc_printf_log( |
11353 | phba, KERN_INFO, LOG_INIT, |
11354 | "6099 NVMET RQ setup: hdr-rq-id=%d, " |
11355 | "dat-rq-id=%d parent cq-id=%d\n" , |
11356 | phba->sli4_hba.nvmet_mrq_hdr[0]->queue_id, |
11357 | phba->sli4_hba.nvmet_mrq_data[0]->queue_id, |
11358 | phba->sli4_hba.nvmet_cqset[0]->queue_id); |
11359 | |
11360 | } |
11361 | } |
11362 | |
11363 | if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) { |
11364 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11365 | "0540 Receive Queue not allocated\n" ); |
11366 | rc = -ENOMEM; |
11367 | goto out_destroy; |
11368 | } |
11369 | |
11370 | rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq, |
11371 | phba->sli4_hba.els_cq, LPFC_USOL); |
11372 | if (rc) { |
11373 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11374 | "0541 Failed setup of Receive Queue: " |
11375 | "rc = 0x%x\n" , (uint32_t)rc); |
11376 | goto out_destroy; |
11377 | } |
11378 | |
11379 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
11380 | "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d " |
11381 | "parent cq-id=%d\n" , |
11382 | phba->sli4_hba.hdr_rq->queue_id, |
11383 | phba->sli4_hba.dat_rq->queue_id, |
11384 | phba->sli4_hba.els_cq->queue_id); |
11385 | |
11386 | if (phba->cfg_fcp_imax) |
11387 | usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax; |
11388 | else |
11389 | usdelay = 0; |
11390 | |
11391 | for (qidx = 0; qidx < phba->cfg_irq_chann; |
11392 | qidx += LPFC_MAX_EQ_DELAY_EQID_CNT) |
11393 | lpfc_modify_hba_eq_delay(phba, startq: qidx, LPFC_MAX_EQ_DELAY_EQID_CNT, |
11394 | usdelay); |
11395 | |
11396 | if (phba->sli4_hba.cq_max) { |
11397 | kfree(objp: phba->sli4_hba.cq_lookup); |
11398 | phba->sli4_hba.cq_lookup = kcalloc(n: (phba->sli4_hba.cq_max + 1), |
11399 | size: sizeof(struct lpfc_queue *), GFP_KERNEL); |
11400 | if (!phba->sli4_hba.cq_lookup) { |
11401 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11402 | "0549 Failed setup of CQ Lookup table: " |
11403 | "size 0x%x\n" , phba->sli4_hba.cq_max); |
11404 | rc = -ENOMEM; |
11405 | goto out_destroy; |
11406 | } |
11407 | lpfc_setup_cq_lookup(phba); |
11408 | } |
11409 | return 0; |
11410 | |
11411 | out_destroy: |
11412 | lpfc_sli4_queue_unset(phba); |
11413 | out_error: |
11414 | return rc; |
11415 | } |
11416 | |
11417 | /** |
11418 | * lpfc_sli4_queue_unset - Unset all the SLI4 queues |
11419 | * @phba: pointer to lpfc hba data structure. |
11420 | * |
11421 | * This routine is invoked to unset all the SLI4 queues with the FCoE HBA |
11422 | * operation. |
11423 | * |
11424 | * Return codes |
11425 | * 0 - successful |
11426 | * -ENOMEM - No available memory |
11427 | * -EIO - The mailbox failed to complete successfully. |
11428 | **/ |
11429 | void |
11430 | lpfc_sli4_queue_unset(struct lpfc_hba *phba) |
11431 | { |
11432 | struct lpfc_sli4_hdw_queue *qp; |
11433 | struct lpfc_queue *eq; |
11434 | int qidx; |
11435 | |
11436 | /* Unset mailbox command work queue */ |
11437 | if (phba->sli4_hba.mbx_wq) |
11438 | lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq); |
11439 | |
11440 | /* Unset NVME LS work queue */ |
11441 | if (phba->sli4_hba.nvmels_wq) |
11442 | lpfc_wq_destroy(phba, phba->sli4_hba.nvmels_wq); |
11443 | |
11444 | /* Unset ELS work queue */ |
11445 | if (phba->sli4_hba.els_wq) |
11446 | lpfc_wq_destroy(phba, phba->sli4_hba.els_wq); |
11447 | |
11448 | /* Unset unsolicited receive queue */ |
11449 | if (phba->sli4_hba.hdr_rq) |
11450 | lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, |
11451 | phba->sli4_hba.dat_rq); |
11452 | |
11453 | /* Unset mailbox command complete queue */ |
11454 | if (phba->sli4_hba.mbx_cq) |
11455 | lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq); |
11456 | |
11457 | /* Unset ELS complete queue */ |
11458 | if (phba->sli4_hba.els_cq) |
11459 | lpfc_cq_destroy(phba, phba->sli4_hba.els_cq); |
11460 | |
11461 | /* Unset NVME LS complete queue */ |
11462 | if (phba->sli4_hba.nvmels_cq) |
11463 | lpfc_cq_destroy(phba, phba->sli4_hba.nvmels_cq); |
11464 | |
11465 | if (phba->nvmet_support) { |
11466 | /* Unset NVMET MRQ queue */ |
11467 | if (phba->sli4_hba.nvmet_mrq_hdr) { |
11468 | for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++) |
11469 | lpfc_rq_destroy( |
11470 | phba, |
11471 | phba->sli4_hba.nvmet_mrq_hdr[qidx], |
11472 | phba->sli4_hba.nvmet_mrq_data[qidx]); |
11473 | } |
11474 | |
11475 | /* Unset NVMET CQ Set complete queue */ |
11476 | if (phba->sli4_hba.nvmet_cqset) { |
11477 | for (qidx = 0; qidx < phba->cfg_nvmet_mrq; qidx++) |
11478 | lpfc_cq_destroy( |
11479 | phba, phba->sli4_hba.nvmet_cqset[qidx]); |
11480 | } |
11481 | } |
11482 | |
11483 | /* Unset fast-path SLI4 queues */ |
11484 | if (phba->sli4_hba.hdwq) { |
11485 | /* Loop thru all Hardware Queues */ |
11486 | for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) { |
11487 | /* Destroy the CQ/WQ corresponding to Hardware Queue */ |
11488 | qp = &phba->sli4_hba.hdwq[qidx]; |
11489 | lpfc_wq_destroy(phba, qp->io_wq); |
11490 | lpfc_cq_destroy(phba, qp->io_cq); |
11491 | } |
11492 | /* Loop thru all IRQ vectors */ |
11493 | for (qidx = 0; qidx < phba->cfg_irq_chann; qidx++) { |
11494 | /* Destroy the EQ corresponding to the IRQ vector */ |
11495 | eq = phba->sli4_hba.hba_eq_hdl[qidx].eq; |
11496 | lpfc_eq_destroy(phba, eq); |
11497 | } |
11498 | } |
11499 | |
11500 | kfree(objp: phba->sli4_hba.cq_lookup); |
11501 | phba->sli4_hba.cq_lookup = NULL; |
11502 | phba->sli4_hba.cq_max = 0; |
11503 | } |
11504 | |
11505 | /** |
11506 | * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool |
11507 | * @phba: pointer to lpfc hba data structure. |
11508 | * |
11509 | * This routine is invoked to allocate and set up a pool of completion queue |
11510 | * events. The body of the completion queue event is a completion queue entry |
11511 | * CQE. For now, this pool is used for the interrupt service routine to queue |
11512 | * the following HBA completion queue events for the worker thread to process: |
11513 | * - Mailbox asynchronous events |
11514 | * - Receive queue completion unsolicited events |
11515 | * Later, this can be used for all the slow-path events. |
11516 | * |
11517 | * Return codes |
11518 | * 0 - successful |
11519 | * -ENOMEM - No available memory |
11520 | **/ |
11521 | static int |
11522 | lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba) |
11523 | { |
11524 | struct lpfc_cq_event *cq_event; |
11525 | int i; |
11526 | |
11527 | for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) { |
11528 | cq_event = kmalloc(size: sizeof(struct lpfc_cq_event), GFP_KERNEL); |
11529 | if (!cq_event) |
11530 | goto out_pool_create_fail; |
11531 | list_add_tail(new: &cq_event->list, |
11532 | head: &phba->sli4_hba.sp_cqe_event_pool); |
11533 | } |
11534 | return 0; |
11535 | |
11536 | out_pool_create_fail: |
11537 | lpfc_sli4_cq_event_pool_destroy(phba); |
11538 | return -ENOMEM; |
11539 | } |
11540 | |
11541 | /** |
11542 | * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool |
11543 | * @phba: pointer to lpfc hba data structure. |
11544 | * |
11545 | * This routine is invoked to free the pool of completion queue events at |
11546 | * driver unload time. Note that, it is the responsibility of the driver |
11547 | * cleanup routine to free all the outstanding completion-queue events |
11548 | * allocated from this pool back into the pool before invoking this routine |
11549 | * to destroy the pool. |
11550 | **/ |
11551 | static void |
11552 | lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba) |
11553 | { |
11554 | struct lpfc_cq_event *cq_event, *next_cq_event; |
11555 | |
11556 | list_for_each_entry_safe(cq_event, next_cq_event, |
11557 | &phba->sli4_hba.sp_cqe_event_pool, list) { |
11558 | list_del(entry: &cq_event->list); |
11559 | kfree(objp: cq_event); |
11560 | } |
11561 | } |
11562 | |
11563 | /** |
11564 | * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool |
11565 | * @phba: pointer to lpfc hba data structure. |
11566 | * |
11567 | * This routine is the lock free version of the API invoked to allocate a |
11568 | * completion-queue event from the free pool. |
11569 | * |
11570 | * Return: Pointer to the newly allocated completion-queue event if successful |
11571 | * NULL otherwise. |
11572 | **/ |
11573 | struct lpfc_cq_event * |
11574 | __lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba) |
11575 | { |
11576 | struct lpfc_cq_event *cq_event = NULL; |
11577 | |
11578 | list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event, |
11579 | struct lpfc_cq_event, list); |
11580 | return cq_event; |
11581 | } |
11582 | |
11583 | /** |
11584 | * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool |
11585 | * @phba: pointer to lpfc hba data structure. |
11586 | * |
11587 | * This routine is the lock version of the API invoked to allocate a |
11588 | * completion-queue event from the free pool. |
11589 | * |
11590 | * Return: Pointer to the newly allocated completion-queue event if successful |
11591 | * NULL otherwise. |
11592 | **/ |
11593 | struct lpfc_cq_event * |
11594 | lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba) |
11595 | { |
11596 | struct lpfc_cq_event *cq_event; |
11597 | unsigned long iflags; |
11598 | |
11599 | spin_lock_irqsave(&phba->hbalock, iflags); |
11600 | cq_event = __lpfc_sli4_cq_event_alloc(phba); |
11601 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflags); |
11602 | return cq_event; |
11603 | } |
11604 | |
11605 | /** |
11606 | * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool |
11607 | * @phba: pointer to lpfc hba data structure. |
11608 | * @cq_event: pointer to the completion queue event to be freed. |
11609 | * |
11610 | * This routine is the lock free version of the API invoked to release a |
11611 | * completion-queue event back into the free pool. |
11612 | **/ |
11613 | void |
11614 | __lpfc_sli4_cq_event_release(struct lpfc_hba *phba, |
11615 | struct lpfc_cq_event *cq_event) |
11616 | { |
11617 | list_add_tail(new: &cq_event->list, head: &phba->sli4_hba.sp_cqe_event_pool); |
11618 | } |
11619 | |
11620 | /** |
11621 | * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool |
11622 | * @phba: pointer to lpfc hba data structure. |
11623 | * @cq_event: pointer to the completion queue event to be freed. |
11624 | * |
11625 | * This routine is the lock version of the API invoked to release a |
11626 | * completion-queue event back into the free pool. |
11627 | **/ |
11628 | void |
11629 | lpfc_sli4_cq_event_release(struct lpfc_hba *phba, |
11630 | struct lpfc_cq_event *cq_event) |
11631 | { |
11632 | unsigned long iflags; |
11633 | spin_lock_irqsave(&phba->hbalock, iflags); |
11634 | __lpfc_sli4_cq_event_release(phba, cq_event); |
11635 | spin_unlock_irqrestore(lock: &phba->hbalock, flags: iflags); |
11636 | } |
11637 | |
11638 | /** |
11639 | * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool |
11640 | * @phba: pointer to lpfc hba data structure. |
11641 | * |
11642 | * This routine is to free all the pending completion-queue events to the |
11643 | * back into the free pool for device reset. |
11644 | **/ |
11645 | static void |
11646 | lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba) |
11647 | { |
11648 | LIST_HEAD(cq_event_list); |
11649 | struct lpfc_cq_event *cq_event; |
11650 | unsigned long iflags; |
11651 | |
11652 | /* Retrieve all the pending WCQEs from pending WCQE lists */ |
11653 | |
11654 | /* Pending ELS XRI abort events */ |
11655 | spin_lock_irqsave(&phba->sli4_hba.els_xri_abrt_list_lock, iflags); |
11656 | list_splice_init(list: &phba->sli4_hba.sp_els_xri_aborted_work_queue, |
11657 | head: &cq_event_list); |
11658 | spin_unlock_irqrestore(lock: &phba->sli4_hba.els_xri_abrt_list_lock, flags: iflags); |
11659 | |
11660 | /* Pending asynnc events */ |
11661 | spin_lock_irqsave(&phba->sli4_hba.asynce_list_lock, iflags); |
11662 | list_splice_init(list: &phba->sli4_hba.sp_asynce_work_queue, |
11663 | head: &cq_event_list); |
11664 | spin_unlock_irqrestore(lock: &phba->sli4_hba.asynce_list_lock, flags: iflags); |
11665 | |
11666 | while (!list_empty(head: &cq_event_list)) { |
11667 | list_remove_head(&cq_event_list, cq_event, |
11668 | struct lpfc_cq_event, list); |
11669 | lpfc_sli4_cq_event_release(phba, cq_event); |
11670 | } |
11671 | } |
11672 | |
11673 | /** |
11674 | * lpfc_pci_function_reset - Reset pci function. |
11675 | * @phba: pointer to lpfc hba data structure. |
11676 | * |
11677 | * This routine is invoked to request a PCI function reset. It will destroys |
11678 | * all resources assigned to the PCI function which originates this request. |
11679 | * |
11680 | * Return codes |
11681 | * 0 - successful |
11682 | * -ENOMEM - No available memory |
11683 | * -EIO - The mailbox failed to complete successfully. |
11684 | **/ |
11685 | int |
11686 | lpfc_pci_function_reset(struct lpfc_hba *phba) |
11687 | { |
11688 | LPFC_MBOXQ_t *mboxq; |
11689 | uint32_t rc = 0, if_type; |
11690 | uint32_t shdr_status, shdr_add_status; |
11691 | uint32_t rdy_chk; |
11692 | uint32_t port_reset = 0; |
11693 | union lpfc_sli4_cfg_shdr *shdr; |
11694 | struct lpfc_register reg_data; |
11695 | uint16_t devid; |
11696 | |
11697 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
11698 | switch (if_type) { |
11699 | case LPFC_SLI_INTF_IF_TYPE_0: |
11700 | mboxq = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, |
11701 | GFP_KERNEL); |
11702 | if (!mboxq) { |
11703 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11704 | "0494 Unable to allocate memory for " |
11705 | "issuing SLI_FUNCTION_RESET mailbox " |
11706 | "command\n" ); |
11707 | return -ENOMEM; |
11708 | } |
11709 | |
11710 | /* Setup PCI function reset mailbox-ioctl command */ |
11711 | lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, |
11712 | LPFC_MBOX_OPCODE_FUNCTION_RESET, 0, |
11713 | LPFC_SLI4_MBX_EMBED); |
11714 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
11715 | shdr = (union lpfc_sli4_cfg_shdr *) |
11716 | &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; |
11717 | shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); |
11718 | shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, |
11719 | &shdr->response); |
11720 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
11721 | if (shdr_status || shdr_add_status || rc) { |
11722 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11723 | "0495 SLI_FUNCTION_RESET mailbox " |
11724 | "failed with status x%x add_status x%x," |
11725 | " mbx status x%x\n" , |
11726 | shdr_status, shdr_add_status, rc); |
11727 | rc = -ENXIO; |
11728 | } |
11729 | break; |
11730 | case LPFC_SLI_INTF_IF_TYPE_2: |
11731 | case LPFC_SLI_INTF_IF_TYPE_6: |
11732 | wait: |
11733 | /* |
11734 | * Poll the Port Status Register and wait for RDY for |
11735 | * up to 30 seconds. If the port doesn't respond, treat |
11736 | * it as an error. |
11737 | */ |
11738 | for (rdy_chk = 0; rdy_chk < 1500; rdy_chk++) { |
11739 | if (lpfc_readl(addr: phba->sli4_hba.u.if_type2. |
11740 | STATUSregaddr, data: ®_data.word0)) { |
11741 | rc = -ENODEV; |
11742 | goto out; |
11743 | } |
11744 | if (bf_get(lpfc_sliport_status_rdy, ®_data)) |
11745 | break; |
11746 | msleep(msecs: 20); |
11747 | } |
11748 | |
11749 | if (!bf_get(lpfc_sliport_status_rdy, ®_data)) { |
11750 | phba->work_status[0] = readl( |
11751 | addr: phba->sli4_hba.u.if_type2.ERR1regaddr); |
11752 | phba->work_status[1] = readl( |
11753 | addr: phba->sli4_hba.u.if_type2.ERR2regaddr); |
11754 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11755 | "2890 Port not ready, port status reg " |
11756 | "0x%x error 1=0x%x, error 2=0x%x\n" , |
11757 | reg_data.word0, |
11758 | phba->work_status[0], |
11759 | phba->work_status[1]); |
11760 | rc = -ENODEV; |
11761 | goto out; |
11762 | } |
11763 | |
11764 | if (bf_get(lpfc_sliport_status_pldv, ®_data)) |
11765 | lpfc_pldv_detect = true; |
11766 | |
11767 | if (!port_reset) { |
11768 | /* |
11769 | * Reset the port now |
11770 | */ |
11771 | reg_data.word0 = 0; |
11772 | bf_set(lpfc_sliport_ctrl_end, ®_data, |
11773 | LPFC_SLIPORT_LITTLE_ENDIAN); |
11774 | bf_set(lpfc_sliport_ctrl_ip, ®_data, |
11775 | LPFC_SLIPORT_INIT_PORT); |
11776 | writel(val: reg_data.word0, addr: phba->sli4_hba.u.if_type2. |
11777 | CTRLregaddr); |
11778 | /* flush */ |
11779 | pci_read_config_word(dev: phba->pcidev, |
11780 | PCI_DEVICE_ID, val: &devid); |
11781 | |
11782 | port_reset = 1; |
11783 | msleep(msecs: 20); |
11784 | goto wait; |
11785 | } else if (bf_get(lpfc_sliport_status_rn, ®_data)) { |
11786 | rc = -ENODEV; |
11787 | goto out; |
11788 | } |
11789 | break; |
11790 | |
11791 | case LPFC_SLI_INTF_IF_TYPE_1: |
11792 | default: |
11793 | break; |
11794 | } |
11795 | |
11796 | out: |
11797 | /* Catch the not-ready port failure after a port reset. */ |
11798 | if (rc) { |
11799 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
11800 | "3317 HBA not functional: IP Reset Failed " |
11801 | "try: echo fw_reset > board_mode\n" ); |
11802 | rc = -ENODEV; |
11803 | } |
11804 | |
11805 | return rc; |
11806 | } |
11807 | |
11808 | /** |
11809 | * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space. |
11810 | * @phba: pointer to lpfc hba data structure. |
11811 | * |
11812 | * This routine is invoked to set up the PCI device memory space for device |
11813 | * with SLI-4 interface spec. |
11814 | * |
11815 | * Return codes |
11816 | * 0 - successful |
11817 | * other values - error |
11818 | **/ |
11819 | static int |
11820 | lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) |
11821 | { |
11822 | struct pci_dev *pdev = phba->pcidev; |
11823 | unsigned long bar0map_len, bar1map_len, bar2map_len; |
11824 | int error; |
11825 | uint32_t if_type; |
11826 | |
11827 | if (!pdev) |
11828 | return -ENODEV; |
11829 | |
11830 | /* Set the device DMA mask size */ |
11831 | error = dma_set_mask_and_coherent(dev: &pdev->dev, DMA_BIT_MASK(64)); |
11832 | if (error) |
11833 | error = dma_set_mask_and_coherent(dev: &pdev->dev, DMA_BIT_MASK(32)); |
11834 | if (error) |
11835 | return error; |
11836 | |
11837 | /* |
11838 | * The BARs and register set definitions and offset locations are |
11839 | * dependent on the if_type. |
11840 | */ |
11841 | if (pci_read_config_dword(dev: pdev, LPFC_SLI_INTF, |
11842 | val: &phba->sli4_hba.sli_intf.word0)) { |
11843 | return -ENODEV; |
11844 | } |
11845 | |
11846 | /* There is no SLI3 failback for SLI4 devices. */ |
11847 | if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) != |
11848 | LPFC_SLI_INTF_VALID) { |
11849 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
11850 | "2894 SLI_INTF reg contents invalid " |
11851 | "sli_intf reg 0x%x\n" , |
11852 | phba->sli4_hba.sli_intf.word0); |
11853 | return -ENODEV; |
11854 | } |
11855 | |
11856 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
11857 | /* |
11858 | * Get the bus address of SLI4 device Bar regions and the |
11859 | * number of bytes required by each mapping. The mapping of the |
11860 | * particular PCI BARs regions is dependent on the type of |
11861 | * SLI4 device. |
11862 | */ |
11863 | if (pci_resource_start(pdev, PCI_64BIT_BAR0)) { |
11864 | phba->pci_bar0_map = pci_resource_start(pdev, PCI_64BIT_BAR0); |
11865 | bar0map_len = pci_resource_len(pdev, PCI_64BIT_BAR0); |
11866 | |
11867 | /* |
11868 | * Map SLI4 PCI Config Space Register base to a kernel virtual |
11869 | * addr |
11870 | */ |
11871 | phba->sli4_hba.conf_regs_memmap_p = |
11872 | ioremap(offset: phba->pci_bar0_map, size: bar0map_len); |
11873 | if (!phba->sli4_hba.conf_regs_memmap_p) { |
11874 | dev_printk(KERN_ERR, &pdev->dev, |
11875 | "ioremap failed for SLI4 PCI config " |
11876 | "registers.\n" ); |
11877 | return -ENODEV; |
11878 | } |
11879 | phba->pci_bar0_memmap_p = phba->sli4_hba.conf_regs_memmap_p; |
11880 | /* Set up BAR0 PCI config space register memory map */ |
11881 | lpfc_sli4_bar0_register_memmap(phba, if_type); |
11882 | } else { |
11883 | phba->pci_bar0_map = pci_resource_start(pdev, 1); |
11884 | bar0map_len = pci_resource_len(pdev, 1); |
11885 | if (if_type >= LPFC_SLI_INTF_IF_TYPE_2) { |
11886 | dev_printk(KERN_ERR, &pdev->dev, |
11887 | "FATAL - No BAR0 mapping for SLI4, if_type 2\n" ); |
11888 | return -ENODEV; |
11889 | } |
11890 | phba->sli4_hba.conf_regs_memmap_p = |
11891 | ioremap(offset: phba->pci_bar0_map, size: bar0map_len); |
11892 | if (!phba->sli4_hba.conf_regs_memmap_p) { |
11893 | dev_printk(KERN_ERR, &pdev->dev, |
11894 | "ioremap failed for SLI4 PCI config " |
11895 | "registers.\n" ); |
11896 | return -ENODEV; |
11897 | } |
11898 | lpfc_sli4_bar0_register_memmap(phba, if_type); |
11899 | } |
11900 | |
11901 | if (if_type == LPFC_SLI_INTF_IF_TYPE_0) { |
11902 | if (pci_resource_start(pdev, PCI_64BIT_BAR2)) { |
11903 | /* |
11904 | * Map SLI4 if type 0 HBA Control Register base to a |
11905 | * kernel virtual address and setup the registers. |
11906 | */ |
11907 | phba->pci_bar1_map = pci_resource_start(pdev, |
11908 | PCI_64BIT_BAR2); |
11909 | bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2); |
11910 | phba->sli4_hba.ctrl_regs_memmap_p = |
11911 | ioremap(offset: phba->pci_bar1_map, |
11912 | size: bar1map_len); |
11913 | if (!phba->sli4_hba.ctrl_regs_memmap_p) { |
11914 | dev_err(&pdev->dev, |
11915 | "ioremap failed for SLI4 HBA " |
11916 | "control registers.\n" ); |
11917 | error = -ENOMEM; |
11918 | goto out_iounmap_conf; |
11919 | } |
11920 | phba->pci_bar2_memmap_p = |
11921 | phba->sli4_hba.ctrl_regs_memmap_p; |
11922 | lpfc_sli4_bar1_register_memmap(phba, if_type); |
11923 | } else { |
11924 | error = -ENOMEM; |
11925 | goto out_iounmap_conf; |
11926 | } |
11927 | } |
11928 | |
11929 | if ((if_type == LPFC_SLI_INTF_IF_TYPE_6) && |
11930 | (pci_resource_start(pdev, PCI_64BIT_BAR2))) { |
11931 | /* |
11932 | * Map SLI4 if type 6 HBA Doorbell Register base to a kernel |
11933 | * virtual address and setup the registers. |
11934 | */ |
11935 | phba->pci_bar1_map = pci_resource_start(pdev, PCI_64BIT_BAR2); |
11936 | bar1map_len = pci_resource_len(pdev, PCI_64BIT_BAR2); |
11937 | phba->sli4_hba.drbl_regs_memmap_p = |
11938 | ioremap(offset: phba->pci_bar1_map, size: bar1map_len); |
11939 | if (!phba->sli4_hba.drbl_regs_memmap_p) { |
11940 | dev_err(&pdev->dev, |
11941 | "ioremap failed for SLI4 HBA doorbell registers.\n" ); |
11942 | error = -ENOMEM; |
11943 | goto out_iounmap_conf; |
11944 | } |
11945 | phba->pci_bar2_memmap_p = phba->sli4_hba.drbl_regs_memmap_p; |
11946 | lpfc_sli4_bar1_register_memmap(phba, if_type); |
11947 | } |
11948 | |
11949 | if (if_type == LPFC_SLI_INTF_IF_TYPE_0) { |
11950 | if (pci_resource_start(pdev, PCI_64BIT_BAR4)) { |
11951 | /* |
11952 | * Map SLI4 if type 0 HBA Doorbell Register base to |
11953 | * a kernel virtual address and setup the registers. |
11954 | */ |
11955 | phba->pci_bar2_map = pci_resource_start(pdev, |
11956 | PCI_64BIT_BAR4); |
11957 | bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4); |
11958 | phba->sli4_hba.drbl_regs_memmap_p = |
11959 | ioremap(offset: phba->pci_bar2_map, |
11960 | size: bar2map_len); |
11961 | if (!phba->sli4_hba.drbl_regs_memmap_p) { |
11962 | dev_err(&pdev->dev, |
11963 | "ioremap failed for SLI4 HBA" |
11964 | " doorbell registers.\n" ); |
11965 | error = -ENOMEM; |
11966 | goto out_iounmap_ctrl; |
11967 | } |
11968 | phba->pci_bar4_memmap_p = |
11969 | phba->sli4_hba.drbl_regs_memmap_p; |
11970 | error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0); |
11971 | if (error) |
11972 | goto out_iounmap_all; |
11973 | } else { |
11974 | error = -ENOMEM; |
11975 | goto out_iounmap_ctrl; |
11976 | } |
11977 | } |
11978 | |
11979 | if (if_type == LPFC_SLI_INTF_IF_TYPE_6 && |
11980 | pci_resource_start(pdev, PCI_64BIT_BAR4)) { |
11981 | /* |
11982 | * Map SLI4 if type 6 HBA DPP Register base to a kernel |
11983 | * virtual address and setup the registers. |
11984 | */ |
11985 | phba->pci_bar2_map = pci_resource_start(pdev, PCI_64BIT_BAR4); |
11986 | bar2map_len = pci_resource_len(pdev, PCI_64BIT_BAR4); |
11987 | phba->sli4_hba.dpp_regs_memmap_p = |
11988 | ioremap(offset: phba->pci_bar2_map, size: bar2map_len); |
11989 | if (!phba->sli4_hba.dpp_regs_memmap_p) { |
11990 | dev_err(&pdev->dev, |
11991 | "ioremap failed for SLI4 HBA dpp registers.\n" ); |
11992 | error = -ENOMEM; |
11993 | goto out_iounmap_all; |
11994 | } |
11995 | phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p; |
11996 | } |
11997 | |
11998 | /* Set up the EQ/CQ register handeling functions now */ |
11999 | switch (if_type) { |
12000 | case LPFC_SLI_INTF_IF_TYPE_0: |
12001 | case LPFC_SLI_INTF_IF_TYPE_2: |
12002 | phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_eq_clr_intr; |
12003 | phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_write_eq_db; |
12004 | phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_write_cq_db; |
12005 | break; |
12006 | case LPFC_SLI_INTF_IF_TYPE_6: |
12007 | phba->sli4_hba.sli4_eq_clr_intr = lpfc_sli4_if6_eq_clr_intr; |
12008 | phba->sli4_hba.sli4_write_eq_db = lpfc_sli4_if6_write_eq_db; |
12009 | phba->sli4_hba.sli4_write_cq_db = lpfc_sli4_if6_write_cq_db; |
12010 | break; |
12011 | default: |
12012 | break; |
12013 | } |
12014 | |
12015 | return 0; |
12016 | |
12017 | out_iounmap_all: |
12018 | if (phba->sli4_hba.drbl_regs_memmap_p) |
12019 | iounmap(addr: phba->sli4_hba.drbl_regs_memmap_p); |
12020 | out_iounmap_ctrl: |
12021 | if (phba->sli4_hba.ctrl_regs_memmap_p) |
12022 | iounmap(addr: phba->sli4_hba.ctrl_regs_memmap_p); |
12023 | out_iounmap_conf: |
12024 | iounmap(addr: phba->sli4_hba.conf_regs_memmap_p); |
12025 | |
12026 | return error; |
12027 | } |
12028 | |
12029 | /** |
12030 | * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space. |
12031 | * @phba: pointer to lpfc hba data structure. |
12032 | * |
12033 | * This routine is invoked to unset the PCI device memory space for device |
12034 | * with SLI-4 interface spec. |
12035 | **/ |
12036 | static void |
12037 | lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba) |
12038 | { |
12039 | uint32_t if_type; |
12040 | if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf); |
12041 | |
12042 | switch (if_type) { |
12043 | case LPFC_SLI_INTF_IF_TYPE_0: |
12044 | iounmap(addr: phba->sli4_hba.drbl_regs_memmap_p); |
12045 | iounmap(addr: phba->sli4_hba.ctrl_regs_memmap_p); |
12046 | iounmap(addr: phba->sli4_hba.conf_regs_memmap_p); |
12047 | break; |
12048 | case LPFC_SLI_INTF_IF_TYPE_2: |
12049 | iounmap(addr: phba->sli4_hba.conf_regs_memmap_p); |
12050 | break; |
12051 | case LPFC_SLI_INTF_IF_TYPE_6: |
12052 | iounmap(addr: phba->sli4_hba.drbl_regs_memmap_p); |
12053 | iounmap(addr: phba->sli4_hba.conf_regs_memmap_p); |
12054 | if (phba->sli4_hba.dpp_regs_memmap_p) |
12055 | iounmap(addr: phba->sli4_hba.dpp_regs_memmap_p); |
12056 | break; |
12057 | case LPFC_SLI_INTF_IF_TYPE_1: |
12058 | break; |
12059 | default: |
12060 | dev_printk(KERN_ERR, &phba->pcidev->dev, |
12061 | "FATAL - unsupported SLI4 interface type - %d\n" , |
12062 | if_type); |
12063 | break; |
12064 | } |
12065 | } |
12066 | |
12067 | /** |
12068 | * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device |
12069 | * @phba: pointer to lpfc hba data structure. |
12070 | * |
12071 | * This routine is invoked to enable the MSI-X interrupt vectors to device |
12072 | * with SLI-3 interface specs. |
12073 | * |
12074 | * Return codes |
12075 | * 0 - successful |
12076 | * other values - error |
12077 | **/ |
12078 | static int |
12079 | lpfc_sli_enable_msix(struct lpfc_hba *phba) |
12080 | { |
12081 | int rc; |
12082 | LPFC_MBOXQ_t *pmb; |
12083 | |
12084 | /* Set up MSI-X multi-message vectors */ |
12085 | rc = pci_alloc_irq_vectors(dev: phba->pcidev, |
12086 | LPFC_MSIX_VECTORS, LPFC_MSIX_VECTORS, PCI_IRQ_MSIX); |
12087 | if (rc < 0) { |
12088 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12089 | "0420 PCI enable MSI-X failed (%d)\n" , rc); |
12090 | goto vec_fail_out; |
12091 | } |
12092 | |
12093 | /* |
12094 | * Assign MSI-X vectors to interrupt handlers |
12095 | */ |
12096 | |
12097 | /* vector-0 is associated to slow-path handler */ |
12098 | rc = request_irq(irq: pci_irq_vector(dev: phba->pcidev, nr: 0), |
12099 | handler: &lpfc_sli_sp_intr_handler, flags: 0, |
12100 | LPFC_SP_DRIVER_HANDLER_NAME, dev: phba); |
12101 | if (rc) { |
12102 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
12103 | "0421 MSI-X slow-path request_irq failed " |
12104 | "(%d)\n" , rc); |
12105 | goto msi_fail_out; |
12106 | } |
12107 | |
12108 | /* vector-1 is associated to fast-path handler */ |
12109 | rc = request_irq(irq: pci_irq_vector(dev: phba->pcidev, nr: 1), |
12110 | handler: &lpfc_sli_fp_intr_handler, flags: 0, |
12111 | LPFC_FP_DRIVER_HANDLER_NAME, dev: phba); |
12112 | |
12113 | if (rc) { |
12114 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
12115 | "0429 MSI-X fast-path request_irq failed " |
12116 | "(%d)\n" , rc); |
12117 | goto irq_fail_out; |
12118 | } |
12119 | |
12120 | /* |
12121 | * Configure HBA MSI-X attention conditions to messages |
12122 | */ |
12123 | pmb = (LPFC_MBOXQ_t *) mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
12124 | |
12125 | if (!pmb) { |
12126 | rc = -ENOMEM; |
12127 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
12128 | "0474 Unable to allocate memory for issuing " |
12129 | "MBOX_CONFIG_MSI command\n" ); |
12130 | goto mem_fail_out; |
12131 | } |
12132 | rc = lpfc_config_msi(phba, pmb); |
12133 | if (rc) |
12134 | goto mbx_fail_out; |
12135 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
12136 | if (rc != MBX_SUCCESS) { |
12137 | lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, |
12138 | "0351 Config MSI mailbox command failed, " |
12139 | "mbxCmd x%x, mbxStatus x%x\n" , |
12140 | pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus); |
12141 | goto mbx_fail_out; |
12142 | } |
12143 | |
12144 | /* Free memory allocated for mailbox command */ |
12145 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
12146 | return rc; |
12147 | |
12148 | mbx_fail_out: |
12149 | /* Free memory allocated for mailbox command */ |
12150 | mempool_free(element: pmb, pool: phba->mbox_mem_pool); |
12151 | |
12152 | mem_fail_out: |
12153 | /* free the irq already requested */ |
12154 | free_irq(pci_irq_vector(dev: phba->pcidev, nr: 1), phba); |
12155 | |
12156 | irq_fail_out: |
12157 | /* free the irq already requested */ |
12158 | free_irq(pci_irq_vector(dev: phba->pcidev, nr: 0), phba); |
12159 | |
12160 | msi_fail_out: |
12161 | /* Unconfigure MSI-X capability structure */ |
12162 | pci_free_irq_vectors(dev: phba->pcidev); |
12163 | |
12164 | vec_fail_out: |
12165 | return rc; |
12166 | } |
12167 | |
12168 | /** |
12169 | * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device. |
12170 | * @phba: pointer to lpfc hba data structure. |
12171 | * |
12172 | * This routine is invoked to enable the MSI interrupt mode to device with |
12173 | * SLI-3 interface spec. The kernel function pci_enable_msi() is called to |
12174 | * enable the MSI vector. The device driver is responsible for calling the |
12175 | * request_irq() to register MSI vector with a interrupt the handler, which |
12176 | * is done in this function. |
12177 | * |
12178 | * Return codes |
12179 | * 0 - successful |
12180 | * other values - error |
12181 | */ |
12182 | static int |
12183 | lpfc_sli_enable_msi(struct lpfc_hba *phba) |
12184 | { |
12185 | int rc; |
12186 | |
12187 | rc = pci_enable_msi(dev: phba->pcidev); |
12188 | if (!rc) |
12189 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12190 | "0012 PCI enable MSI mode success.\n" ); |
12191 | else { |
12192 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12193 | "0471 PCI enable MSI mode failed (%d)\n" , rc); |
12194 | return rc; |
12195 | } |
12196 | |
12197 | rc = request_irq(irq: phba->pcidev->irq, handler: lpfc_sli_intr_handler, |
12198 | flags: 0, LPFC_DRIVER_NAME, dev: phba); |
12199 | if (rc) { |
12200 | pci_disable_msi(dev: phba->pcidev); |
12201 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
12202 | "0478 MSI request_irq failed (%d)\n" , rc); |
12203 | } |
12204 | return rc; |
12205 | } |
12206 | |
12207 | /** |
12208 | * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device. |
12209 | * @phba: pointer to lpfc hba data structure. |
12210 | * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X). |
12211 | * |
12212 | * This routine is invoked to enable device interrupt and associate driver's |
12213 | * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface |
12214 | * spec. Depends on the interrupt mode configured to the driver, the driver |
12215 | * will try to fallback from the configured interrupt mode to an interrupt |
12216 | * mode which is supported by the platform, kernel, and device in the order |
12217 | * of: |
12218 | * MSI-X -> MSI -> IRQ. |
12219 | * |
12220 | * Return codes |
12221 | * 0 - successful |
12222 | * other values - error |
12223 | **/ |
12224 | static uint32_t |
12225 | lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) |
12226 | { |
12227 | uint32_t intr_mode = LPFC_INTR_ERROR; |
12228 | int retval; |
12229 | |
12230 | /* Need to issue conf_port mbox cmd before conf_msi mbox cmd */ |
12231 | retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3); |
12232 | if (retval) |
12233 | return intr_mode; |
12234 | phba->hba_flag &= ~HBA_NEEDS_CFG_PORT; |
12235 | |
12236 | if (cfg_mode == 2) { |
12237 | /* Now, try to enable MSI-X interrupt mode */ |
12238 | retval = lpfc_sli_enable_msix(phba); |
12239 | if (!retval) { |
12240 | /* Indicate initialization to MSI-X mode */ |
12241 | phba->intr_type = MSIX; |
12242 | intr_mode = 2; |
12243 | } |
12244 | } |
12245 | |
12246 | /* Fallback to MSI if MSI-X initialization failed */ |
12247 | if (cfg_mode >= 1 && phba->intr_type == NONE) { |
12248 | retval = lpfc_sli_enable_msi(phba); |
12249 | if (!retval) { |
12250 | /* Indicate initialization to MSI mode */ |
12251 | phba->intr_type = MSI; |
12252 | intr_mode = 1; |
12253 | } |
12254 | } |
12255 | |
12256 | /* Fallback to INTx if both MSI-X/MSI initalization failed */ |
12257 | if (phba->intr_type == NONE) { |
12258 | retval = request_irq(irq: phba->pcidev->irq, handler: lpfc_sli_intr_handler, |
12259 | IRQF_SHARED, LPFC_DRIVER_NAME, dev: phba); |
12260 | if (!retval) { |
12261 | /* Indicate initialization to INTx mode */ |
12262 | phba->intr_type = INTx; |
12263 | intr_mode = 0; |
12264 | } |
12265 | } |
12266 | return intr_mode; |
12267 | } |
12268 | |
12269 | /** |
12270 | * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device. |
12271 | * @phba: pointer to lpfc hba data structure. |
12272 | * |
12273 | * This routine is invoked to disable device interrupt and disassociate the |
12274 | * driver's interrupt handler(s) from interrupt vector(s) to device with |
12275 | * SLI-3 interface spec. Depending on the interrupt mode, the driver will |
12276 | * release the interrupt vector(s) for the message signaled interrupt. |
12277 | **/ |
12278 | static void |
12279 | lpfc_sli_disable_intr(struct lpfc_hba *phba) |
12280 | { |
12281 | int nr_irqs, i; |
12282 | |
12283 | if (phba->intr_type == MSIX) |
12284 | nr_irqs = LPFC_MSIX_VECTORS; |
12285 | else |
12286 | nr_irqs = 1; |
12287 | |
12288 | for (i = 0; i < nr_irqs; i++) |
12289 | free_irq(pci_irq_vector(dev: phba->pcidev, nr: i), phba); |
12290 | pci_free_irq_vectors(dev: phba->pcidev); |
12291 | |
12292 | /* Reset interrupt management states */ |
12293 | phba->intr_type = NONE; |
12294 | phba->sli.slistat.sli_intr = 0; |
12295 | } |
12296 | |
12297 | /** |
12298 | * lpfc_find_cpu_handle - Find the CPU that corresponds to the specified Queue |
12299 | * @phba: pointer to lpfc hba data structure. |
12300 | * @id: EQ vector index or Hardware Queue index |
12301 | * @match: LPFC_FIND_BY_EQ = match by EQ |
12302 | * LPFC_FIND_BY_HDWQ = match by Hardware Queue |
12303 | * Return the CPU that matches the selection criteria |
12304 | */ |
12305 | static uint16_t |
12306 | lpfc_find_cpu_handle(struct lpfc_hba *phba, uint16_t id, int match) |
12307 | { |
12308 | struct lpfc_vector_map_info *cpup; |
12309 | int cpu; |
12310 | |
12311 | /* Loop through all CPUs */ |
12312 | for_each_present_cpu(cpu) { |
12313 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12314 | |
12315 | /* If we are matching by EQ, there may be multiple CPUs using |
12316 | * using the same vector, so select the one with |
12317 | * LPFC_CPU_FIRST_IRQ set. |
12318 | */ |
12319 | if ((match == LPFC_FIND_BY_EQ) && |
12320 | (cpup->flag & LPFC_CPU_FIRST_IRQ) && |
12321 | (cpup->eq == id)) |
12322 | return cpu; |
12323 | |
12324 | /* If matching by HDWQ, select the first CPU that matches */ |
12325 | if ((match == LPFC_FIND_BY_HDWQ) && (cpup->hdwq == id)) |
12326 | return cpu; |
12327 | } |
12328 | return 0; |
12329 | } |
12330 | |
12331 | #ifdef CONFIG_X86 |
12332 | /** |
12333 | * lpfc_find_hyper - Determine if the CPU map entry is hyper-threaded |
12334 | * @phba: pointer to lpfc hba data structure. |
12335 | * @cpu: CPU map index |
12336 | * @phys_id: CPU package physical id |
12337 | * @core_id: CPU core id |
12338 | */ |
12339 | static int |
12340 | lpfc_find_hyper(struct lpfc_hba *phba, int cpu, |
12341 | uint16_t phys_id, uint16_t core_id) |
12342 | { |
12343 | struct lpfc_vector_map_info *cpup; |
12344 | int idx; |
12345 | |
12346 | for_each_present_cpu(idx) { |
12347 | cpup = &phba->sli4_hba.cpu_map[idx]; |
12348 | /* Does the cpup match the one we are looking for */ |
12349 | if ((cpup->phys_id == phys_id) && |
12350 | (cpup->core_id == core_id) && |
12351 | (cpu != idx)) |
12352 | return 1; |
12353 | } |
12354 | return 0; |
12355 | } |
12356 | #endif |
12357 | |
12358 | /* |
12359 | * lpfc_assign_eq_map_info - Assigns eq for vector_map structure |
12360 | * @phba: pointer to lpfc hba data structure. |
12361 | * @eqidx: index for eq and irq vector |
12362 | * @flag: flags to set for vector_map structure |
12363 | * @cpu: cpu used to index vector_map structure |
12364 | * |
12365 | * The routine assigns eq info into vector_map structure |
12366 | */ |
12367 | static inline void |
12368 | lpfc_assign_eq_map_info(struct lpfc_hba *phba, uint16_t eqidx, uint16_t flag, |
12369 | unsigned int cpu) |
12370 | { |
12371 | struct lpfc_vector_map_info *cpup = &phba->sli4_hba.cpu_map[cpu]; |
12372 | struct lpfc_hba_eq_hdl *eqhdl = lpfc_get_eq_hdl(eqidx); |
12373 | |
12374 | cpup->eq = eqidx; |
12375 | cpup->flag |= flag; |
12376 | |
12377 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12378 | "3336 Set Affinity: CPU %d irq %d eq %d flag x%x\n" , |
12379 | cpu, eqhdl->irq, cpup->eq, cpup->flag); |
12380 | } |
12381 | |
12382 | /** |
12383 | * lpfc_cpu_map_array_init - Initialize cpu_map structure |
12384 | * @phba: pointer to lpfc hba data structure. |
12385 | * |
12386 | * The routine initializes the cpu_map array structure |
12387 | */ |
12388 | static void |
12389 | lpfc_cpu_map_array_init(struct lpfc_hba *phba) |
12390 | { |
12391 | struct lpfc_vector_map_info *cpup; |
12392 | struct lpfc_eq_intr_info *eqi; |
12393 | int cpu; |
12394 | |
12395 | for_each_possible_cpu(cpu) { |
12396 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12397 | cpup->phys_id = LPFC_VECTOR_MAP_EMPTY; |
12398 | cpup->core_id = LPFC_VECTOR_MAP_EMPTY; |
12399 | cpup->hdwq = LPFC_VECTOR_MAP_EMPTY; |
12400 | cpup->eq = LPFC_VECTOR_MAP_EMPTY; |
12401 | cpup->flag = 0; |
12402 | eqi = per_cpu_ptr(phba->sli4_hba.eq_info, cpu); |
12403 | INIT_LIST_HEAD(list: &eqi->list); |
12404 | eqi->icnt = 0; |
12405 | } |
12406 | } |
12407 | |
12408 | /** |
12409 | * lpfc_hba_eq_hdl_array_init - Initialize hba_eq_hdl structure |
12410 | * @phba: pointer to lpfc hba data structure. |
12411 | * |
12412 | * The routine initializes the hba_eq_hdl array structure |
12413 | */ |
12414 | static void |
12415 | lpfc_hba_eq_hdl_array_init(struct lpfc_hba *phba) |
12416 | { |
12417 | struct lpfc_hba_eq_hdl *eqhdl; |
12418 | int i; |
12419 | |
12420 | for (i = 0; i < phba->cfg_irq_chann; i++) { |
12421 | eqhdl = lpfc_get_eq_hdl(i); |
12422 | eqhdl->irq = LPFC_IRQ_EMPTY; |
12423 | eqhdl->phba = phba; |
12424 | } |
12425 | } |
12426 | |
12427 | /** |
12428 | * lpfc_cpu_affinity_check - Check vector CPU affinity mappings |
12429 | * @phba: pointer to lpfc hba data structure. |
12430 | * @vectors: number of msix vectors allocated. |
12431 | * |
12432 | * The routine will figure out the CPU affinity assignment for every |
12433 | * MSI-X vector allocated for the HBA. |
12434 | * In addition, the CPU to IO channel mapping will be calculated |
12435 | * and the phba->sli4_hba.cpu_map array will reflect this. |
12436 | */ |
12437 | static void |
12438 | lpfc_cpu_affinity_check(struct lpfc_hba *phba, int vectors) |
12439 | { |
12440 | int i, cpu, idx, next_idx, new_cpu, start_cpu, first_cpu; |
12441 | int max_phys_id, min_phys_id; |
12442 | int max_core_id, min_core_id; |
12443 | struct lpfc_vector_map_info *cpup; |
12444 | struct lpfc_vector_map_info *new_cpup; |
12445 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
12446 | struct lpfc_hdwq_stat *c_stat; |
12447 | #endif |
12448 | |
12449 | max_phys_id = 0; |
12450 | min_phys_id = LPFC_VECTOR_MAP_EMPTY; |
12451 | max_core_id = 0; |
12452 | min_core_id = LPFC_VECTOR_MAP_EMPTY; |
12453 | |
12454 | /* Update CPU map with physical id and core id of each CPU */ |
12455 | for_each_present_cpu(cpu) { |
12456 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12457 | #ifdef CONFIG_X86 |
12458 | cpup->phys_id = topology_physical_package_id(cpu); |
12459 | cpup->core_id = topology_core_id(cpu); |
12460 | if (lpfc_find_hyper(phba, cpu, phys_id: cpup->phys_id, core_id: cpup->core_id)) |
12461 | cpup->flag |= LPFC_CPU_MAP_HYPER; |
12462 | #else |
12463 | /* No distinction between CPUs for other platforms */ |
12464 | cpup->phys_id = 0; |
12465 | cpup->core_id = cpu; |
12466 | #endif |
12467 | |
12468 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12469 | "3328 CPU %d physid %d coreid %d flag x%x\n" , |
12470 | cpu, cpup->phys_id, cpup->core_id, cpup->flag); |
12471 | |
12472 | if (cpup->phys_id > max_phys_id) |
12473 | max_phys_id = cpup->phys_id; |
12474 | if (cpup->phys_id < min_phys_id) |
12475 | min_phys_id = cpup->phys_id; |
12476 | |
12477 | if (cpup->core_id > max_core_id) |
12478 | max_core_id = cpup->core_id; |
12479 | if (cpup->core_id < min_core_id) |
12480 | min_core_id = cpup->core_id; |
12481 | } |
12482 | |
12483 | /* After looking at each irq vector assigned to this pcidev, its |
12484 | * possible to see that not ALL CPUs have been accounted for. |
12485 | * Next we will set any unassigned (unaffinitized) cpu map |
12486 | * entries to a IRQ on the same phys_id. |
12487 | */ |
12488 | first_cpu = cpumask_first(cpu_present_mask); |
12489 | start_cpu = first_cpu; |
12490 | |
12491 | for_each_present_cpu(cpu) { |
12492 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12493 | |
12494 | /* Is this CPU entry unassigned */ |
12495 | if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { |
12496 | /* Mark CPU as IRQ not assigned by the kernel */ |
12497 | cpup->flag |= LPFC_CPU_MAP_UNASSIGN; |
12498 | |
12499 | /* If so, find a new_cpup that is on the SAME |
12500 | * phys_id as cpup. start_cpu will start where we |
12501 | * left off so all unassigned entries don't get assgined |
12502 | * the IRQ of the first entry. |
12503 | */ |
12504 | new_cpu = start_cpu; |
12505 | for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { |
12506 | new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; |
12507 | if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) && |
12508 | (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY) && |
12509 | (new_cpup->phys_id == cpup->phys_id)) |
12510 | goto found_same; |
12511 | new_cpu = lpfc_next_present_cpu(n: new_cpu); |
12512 | } |
12513 | /* At this point, we leave the CPU as unassigned */ |
12514 | continue; |
12515 | found_same: |
12516 | /* We found a matching phys_id, so copy the IRQ info */ |
12517 | cpup->eq = new_cpup->eq; |
12518 | |
12519 | /* Bump start_cpu to the next slot to minmize the |
12520 | * chance of having multiple unassigned CPU entries |
12521 | * selecting the same IRQ. |
12522 | */ |
12523 | start_cpu = lpfc_next_present_cpu(n: new_cpu); |
12524 | |
12525 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12526 | "3337 Set Affinity: CPU %d " |
12527 | "eq %d from peer cpu %d same " |
12528 | "phys_id (%d)\n" , |
12529 | cpu, cpup->eq, new_cpu, |
12530 | cpup->phys_id); |
12531 | } |
12532 | } |
12533 | |
12534 | /* Set any unassigned cpu map entries to a IRQ on any phys_id */ |
12535 | start_cpu = first_cpu; |
12536 | |
12537 | for_each_present_cpu(cpu) { |
12538 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12539 | |
12540 | /* Is this entry unassigned */ |
12541 | if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) { |
12542 | /* Mark it as IRQ not assigned by the kernel */ |
12543 | cpup->flag |= LPFC_CPU_MAP_UNASSIGN; |
12544 | |
12545 | /* If so, find a new_cpup thats on ANY phys_id |
12546 | * as the cpup. start_cpu will start where we |
12547 | * left off so all unassigned entries don't get |
12548 | * assigned the IRQ of the first entry. |
12549 | */ |
12550 | new_cpu = start_cpu; |
12551 | for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { |
12552 | new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; |
12553 | if (!(new_cpup->flag & LPFC_CPU_MAP_UNASSIGN) && |
12554 | (new_cpup->eq != LPFC_VECTOR_MAP_EMPTY)) |
12555 | goto found_any; |
12556 | new_cpu = lpfc_next_present_cpu(n: new_cpu); |
12557 | } |
12558 | /* We should never leave an entry unassigned */ |
12559 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
12560 | "3339 Set Affinity: CPU %d " |
12561 | "eq %d UNASSIGNED\n" , |
12562 | cpup->hdwq, cpup->eq); |
12563 | continue; |
12564 | found_any: |
12565 | /* We found an available entry, copy the IRQ info */ |
12566 | cpup->eq = new_cpup->eq; |
12567 | |
12568 | /* Bump start_cpu to the next slot to minmize the |
12569 | * chance of having multiple unassigned CPU entries |
12570 | * selecting the same IRQ. |
12571 | */ |
12572 | start_cpu = lpfc_next_present_cpu(n: new_cpu); |
12573 | |
12574 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12575 | "3338 Set Affinity: CPU %d " |
12576 | "eq %d from peer cpu %d (%d/%d)\n" , |
12577 | cpu, cpup->eq, new_cpu, |
12578 | new_cpup->phys_id, new_cpup->core_id); |
12579 | } |
12580 | } |
12581 | |
12582 | /* Assign hdwq indices that are unique across all cpus in the map |
12583 | * that are also FIRST_CPUs. |
12584 | */ |
12585 | idx = 0; |
12586 | for_each_present_cpu(cpu) { |
12587 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12588 | |
12589 | /* Only FIRST IRQs get a hdwq index assignment. */ |
12590 | if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) |
12591 | continue; |
12592 | |
12593 | /* 1 to 1, the first LPFC_CPU_FIRST_IRQ cpus to a unique hdwq */ |
12594 | cpup->hdwq = idx; |
12595 | idx++; |
12596 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12597 | "3333 Set Affinity: CPU %d (phys %d core %d): " |
12598 | "hdwq %d eq %d flg x%x\n" , |
12599 | cpu, cpup->phys_id, cpup->core_id, |
12600 | cpup->hdwq, cpup->eq, cpup->flag); |
12601 | } |
12602 | /* Associate a hdwq with each cpu_map entry |
12603 | * This will be 1 to 1 - hdwq to cpu, unless there are less |
12604 | * hardware queues then CPUs. For that case we will just round-robin |
12605 | * the available hardware queues as they get assigned to CPUs. |
12606 | * The next_idx is the idx from the FIRST_CPU loop above to account |
12607 | * for irq_chann < hdwq. The idx is used for round-robin assignments |
12608 | * and needs to start at 0. |
12609 | */ |
12610 | next_idx = idx; |
12611 | start_cpu = 0; |
12612 | idx = 0; |
12613 | for_each_present_cpu(cpu) { |
12614 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12615 | |
12616 | /* FIRST cpus are already mapped. */ |
12617 | if (cpup->flag & LPFC_CPU_FIRST_IRQ) |
12618 | continue; |
12619 | |
12620 | /* If the cfg_irq_chann < cfg_hdw_queue, set the hdwq |
12621 | * of the unassigned cpus to the next idx so that all |
12622 | * hdw queues are fully utilized. |
12623 | */ |
12624 | if (next_idx < phba->cfg_hdw_queue) { |
12625 | cpup->hdwq = next_idx; |
12626 | next_idx++; |
12627 | continue; |
12628 | } |
12629 | |
12630 | /* Not a First CPU and all hdw_queues are used. Reuse a |
12631 | * Hardware Queue for another CPU, so be smart about it |
12632 | * and pick one that has its IRQ/EQ mapped to the same phys_id |
12633 | * (CPU package) and core_id. |
12634 | */ |
12635 | new_cpu = start_cpu; |
12636 | for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { |
12637 | new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; |
12638 | if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY && |
12639 | new_cpup->phys_id == cpup->phys_id && |
12640 | new_cpup->core_id == cpup->core_id) { |
12641 | goto found_hdwq; |
12642 | } |
12643 | new_cpu = lpfc_next_present_cpu(n: new_cpu); |
12644 | } |
12645 | |
12646 | /* If we can't match both phys_id and core_id, |
12647 | * settle for just a phys_id match. |
12648 | */ |
12649 | new_cpu = start_cpu; |
12650 | for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) { |
12651 | new_cpup = &phba->sli4_hba.cpu_map[new_cpu]; |
12652 | if (new_cpup->hdwq != LPFC_VECTOR_MAP_EMPTY && |
12653 | new_cpup->phys_id == cpup->phys_id) |
12654 | goto found_hdwq; |
12655 | new_cpu = lpfc_next_present_cpu(n: new_cpu); |
12656 | } |
12657 | |
12658 | /* Otherwise just round robin on cfg_hdw_queue */ |
12659 | cpup->hdwq = idx % phba->cfg_hdw_queue; |
12660 | idx++; |
12661 | goto logit; |
12662 | found_hdwq: |
12663 | /* We found an available entry, copy the IRQ info */ |
12664 | start_cpu = lpfc_next_present_cpu(n: new_cpu); |
12665 | cpup->hdwq = new_cpup->hdwq; |
12666 | logit: |
12667 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12668 | "3335 Set Affinity: CPU %d (phys %d core %d): " |
12669 | "hdwq %d eq %d flg x%x\n" , |
12670 | cpu, cpup->phys_id, cpup->core_id, |
12671 | cpup->hdwq, cpup->eq, cpup->flag); |
12672 | } |
12673 | |
12674 | /* |
12675 | * Initialize the cpu_map slots for not-present cpus in case |
12676 | * a cpu is hot-added. Perform a simple hdwq round robin assignment. |
12677 | */ |
12678 | idx = 0; |
12679 | for_each_possible_cpu(cpu) { |
12680 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12681 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
12682 | c_stat = per_cpu_ptr(phba->sli4_hba.c_stat, cpu); |
12683 | c_stat->hdwq_no = cpup->hdwq; |
12684 | #endif |
12685 | if (cpup->hdwq != LPFC_VECTOR_MAP_EMPTY) |
12686 | continue; |
12687 | |
12688 | cpup->hdwq = idx++ % phba->cfg_hdw_queue; |
12689 | #ifdef CONFIG_SCSI_LPFC_DEBUG_FS |
12690 | c_stat->hdwq_no = cpup->hdwq; |
12691 | #endif |
12692 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
12693 | "3340 Set Affinity: not present " |
12694 | "CPU %d hdwq %d\n" , |
12695 | cpu, cpup->hdwq); |
12696 | } |
12697 | |
12698 | /* The cpu_map array will be used later during initialization |
12699 | * when EQ / CQ / WQs are allocated and configured. |
12700 | */ |
12701 | return; |
12702 | } |
12703 | |
12704 | /** |
12705 | * lpfc_cpuhp_get_eq |
12706 | * |
12707 | * @phba: pointer to lpfc hba data structure. |
12708 | * @cpu: cpu going offline |
12709 | * @eqlist: eq list to append to |
12710 | */ |
12711 | static int |
12712 | lpfc_cpuhp_get_eq(struct lpfc_hba *phba, unsigned int cpu, |
12713 | struct list_head *eqlist) |
12714 | { |
12715 | const struct cpumask *maskp; |
12716 | struct lpfc_queue *eq; |
12717 | struct cpumask *tmp; |
12718 | u16 idx; |
12719 | |
12720 | tmp = kzalloc(size: cpumask_size(), GFP_KERNEL); |
12721 | if (!tmp) |
12722 | return -ENOMEM; |
12723 | |
12724 | for (idx = 0; idx < phba->cfg_irq_chann; idx++) { |
12725 | maskp = pci_irq_get_affinity(pdev: phba->pcidev, vec: idx); |
12726 | if (!maskp) |
12727 | continue; |
12728 | /* |
12729 | * if irq is not affinitized to the cpu going |
12730 | * then we don't need to poll the eq attached |
12731 | * to it. |
12732 | */ |
12733 | if (!cpumask_and(dstp: tmp, src1p: maskp, cpumask_of(cpu))) |
12734 | continue; |
12735 | /* get the cpus that are online and are affini- |
12736 | * tized to this irq vector. If the count is |
12737 | * more than 1 then cpuhp is not going to shut- |
12738 | * down this vector. Since this cpu has not |
12739 | * gone offline yet, we need >1. |
12740 | */ |
12741 | cpumask_and(dstp: tmp, src1p: maskp, cpu_online_mask); |
12742 | if (cpumask_weight(srcp: tmp) > 1) |
12743 | continue; |
12744 | |
12745 | /* Now that we have an irq to shutdown, get the eq |
12746 | * mapped to this irq. Note: multiple hdwq's in |
12747 | * the software can share an eq, but eventually |
12748 | * only eq will be mapped to this vector |
12749 | */ |
12750 | eq = phba->sli4_hba.hba_eq_hdl[idx].eq; |
12751 | list_add(new: &eq->_poll_list, head: eqlist); |
12752 | } |
12753 | kfree(objp: tmp); |
12754 | return 0; |
12755 | } |
12756 | |
12757 | static void __lpfc_cpuhp_remove(struct lpfc_hba *phba) |
12758 | { |
12759 | if (phba->sli_rev != LPFC_SLI_REV4) |
12760 | return; |
12761 | |
12762 | cpuhp_state_remove_instance_nocalls(state: lpfc_cpuhp_state, |
12763 | node: &phba->cpuhp); |
12764 | /* |
12765 | * unregistering the instance doesn't stop the polling |
12766 | * timer. Wait for the poll timer to retire. |
12767 | */ |
12768 | synchronize_rcu(); |
12769 | del_timer_sync(timer: &phba->cpuhp_poll_timer); |
12770 | } |
12771 | |
12772 | static void lpfc_cpuhp_remove(struct lpfc_hba *phba) |
12773 | { |
12774 | if (phba->pport && (phba->pport->fc_flag & FC_OFFLINE_MODE)) |
12775 | return; |
12776 | |
12777 | __lpfc_cpuhp_remove(phba); |
12778 | } |
12779 | |
12780 | static void lpfc_cpuhp_add(struct lpfc_hba *phba) |
12781 | { |
12782 | if (phba->sli_rev != LPFC_SLI_REV4) |
12783 | return; |
12784 | |
12785 | rcu_read_lock(); |
12786 | |
12787 | if (!list_empty(head: &phba->poll_list)) |
12788 | mod_timer(timer: &phba->cpuhp_poll_timer, |
12789 | expires: jiffies + msecs_to_jiffies(LPFC_POLL_HB)); |
12790 | |
12791 | rcu_read_unlock(); |
12792 | |
12793 | cpuhp_state_add_instance_nocalls(state: lpfc_cpuhp_state, |
12794 | node: &phba->cpuhp); |
12795 | } |
12796 | |
12797 | static int __lpfc_cpuhp_checks(struct lpfc_hba *phba, int *retval) |
12798 | { |
12799 | if (phba->pport->load_flag & FC_UNLOADING) { |
12800 | *retval = -EAGAIN; |
12801 | return true; |
12802 | } |
12803 | |
12804 | if (phba->sli_rev != LPFC_SLI_REV4) { |
12805 | *retval = 0; |
12806 | return true; |
12807 | } |
12808 | |
12809 | /* proceed with the hotplug */ |
12810 | return false; |
12811 | } |
12812 | |
12813 | /** |
12814 | * lpfc_irq_set_aff - set IRQ affinity |
12815 | * @eqhdl: EQ handle |
12816 | * @cpu: cpu to set affinity |
12817 | * |
12818 | **/ |
12819 | static inline void |
12820 | lpfc_irq_set_aff(struct lpfc_hba_eq_hdl *eqhdl, unsigned int cpu) |
12821 | { |
12822 | cpumask_clear(dstp: &eqhdl->aff_mask); |
12823 | cpumask_set_cpu(cpu, dstp: &eqhdl->aff_mask); |
12824 | irq_set_status_flags(irq: eqhdl->irq, set: IRQ_NO_BALANCING); |
12825 | irq_set_affinity(irq: eqhdl->irq, cpumask: &eqhdl->aff_mask); |
12826 | } |
12827 | |
12828 | /** |
12829 | * lpfc_irq_clear_aff - clear IRQ affinity |
12830 | * @eqhdl: EQ handle |
12831 | * |
12832 | **/ |
12833 | static inline void |
12834 | lpfc_irq_clear_aff(struct lpfc_hba_eq_hdl *eqhdl) |
12835 | { |
12836 | cpumask_clear(dstp: &eqhdl->aff_mask); |
12837 | irq_clear_status_flags(irq: eqhdl->irq, clr: IRQ_NO_BALANCING); |
12838 | } |
12839 | |
12840 | /** |
12841 | * lpfc_irq_rebalance - rebalances IRQ affinity according to cpuhp event |
12842 | * @phba: pointer to HBA context object. |
12843 | * @cpu: cpu going offline/online |
12844 | * @offline: true, cpu is going offline. false, cpu is coming online. |
12845 | * |
12846 | * If cpu is going offline, we'll try our best effort to find the next |
12847 | * online cpu on the phba's original_mask and migrate all offlining IRQ |
12848 | * affinities. |
12849 | * |
12850 | * If cpu is coming online, reaffinitize the IRQ back to the onlining cpu. |
12851 | * |
12852 | * Note: Call only if NUMA or NHT mode is enabled, otherwise rely on |
12853 | * PCI_IRQ_AFFINITY to auto-manage IRQ affinity. |
12854 | * |
12855 | **/ |
12856 | static void |
12857 | lpfc_irq_rebalance(struct lpfc_hba *phba, unsigned int cpu, bool offline) |
12858 | { |
12859 | struct lpfc_vector_map_info *cpup; |
12860 | struct cpumask *aff_mask; |
12861 | unsigned int cpu_select, cpu_next, idx; |
12862 | const struct cpumask *orig_mask; |
12863 | |
12864 | if (phba->irq_chann_mode == NORMAL_MODE) |
12865 | return; |
12866 | |
12867 | orig_mask = &phba->sli4_hba.irq_aff_mask; |
12868 | |
12869 | if (!cpumask_test_cpu(cpu, cpumask: orig_mask)) |
12870 | return; |
12871 | |
12872 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
12873 | |
12874 | if (!(cpup->flag & LPFC_CPU_FIRST_IRQ)) |
12875 | return; |
12876 | |
12877 | if (offline) { |
12878 | /* Find next online CPU on original mask */ |
12879 | cpu_next = cpumask_next_wrap(n: cpu, mask: orig_mask, start: cpu, wrap: true); |
12880 | cpu_select = lpfc_next_online_cpu(mask: orig_mask, start: cpu_next); |
12881 | |
12882 | /* Found a valid CPU */ |
12883 | if ((cpu_select < nr_cpu_ids) && (cpu_select != cpu)) { |
12884 | /* Go through each eqhdl and ensure offlining |
12885 | * cpu aff_mask is migrated |
12886 | */ |
12887 | for (idx = 0; idx < phba->cfg_irq_chann; idx++) { |
12888 | aff_mask = lpfc_get_aff_mask(idx); |
12889 | |
12890 | /* Migrate affinity */ |
12891 | if (cpumask_test_cpu(cpu, cpumask: aff_mask)) |
12892 | lpfc_irq_set_aff(lpfc_get_eq_hdl(idx), |
12893 | cpu: cpu_select); |
12894 | } |
12895 | } else { |
12896 | /* Rely on irqbalance if no online CPUs left on NUMA */ |
12897 | for (idx = 0; idx < phba->cfg_irq_chann; idx++) |
12898 | lpfc_irq_clear_aff(lpfc_get_eq_hdl(idx)); |
12899 | } |
12900 | } else { |
12901 | /* Migrate affinity back to this CPU */ |
12902 | lpfc_irq_set_aff(lpfc_get_eq_hdl(cpup->eq), cpu); |
12903 | } |
12904 | } |
12905 | |
12906 | static int lpfc_cpu_offline(unsigned int cpu, struct hlist_node *node) |
12907 | { |
12908 | struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp); |
12909 | struct lpfc_queue *eq, *next; |
12910 | LIST_HEAD(eqlist); |
12911 | int retval; |
12912 | |
12913 | if (!phba) { |
12914 | WARN_ONCE(!phba, "cpu: %u. phba:NULL" , raw_smp_processor_id()); |
12915 | return 0; |
12916 | } |
12917 | |
12918 | if (__lpfc_cpuhp_checks(phba, retval: &retval)) |
12919 | return retval; |
12920 | |
12921 | lpfc_irq_rebalance(phba, cpu, offline: true); |
12922 | |
12923 | retval = lpfc_cpuhp_get_eq(phba, cpu, eqlist: &eqlist); |
12924 | if (retval) |
12925 | return retval; |
12926 | |
12927 | /* start polling on these eq's */ |
12928 | list_for_each_entry_safe(eq, next, &eqlist, _poll_list) { |
12929 | list_del_init(entry: &eq->_poll_list); |
12930 | lpfc_sli4_start_polling(q: eq); |
12931 | } |
12932 | |
12933 | return 0; |
12934 | } |
12935 | |
12936 | static int lpfc_cpu_online(unsigned int cpu, struct hlist_node *node) |
12937 | { |
12938 | struct lpfc_hba *phba = hlist_entry_safe(node, struct lpfc_hba, cpuhp); |
12939 | struct lpfc_queue *eq, *next; |
12940 | unsigned int n; |
12941 | int retval; |
12942 | |
12943 | if (!phba) { |
12944 | WARN_ONCE(!phba, "cpu: %u. phba:NULL" , raw_smp_processor_id()); |
12945 | return 0; |
12946 | } |
12947 | |
12948 | if (__lpfc_cpuhp_checks(phba, retval: &retval)) |
12949 | return retval; |
12950 | |
12951 | lpfc_irq_rebalance(phba, cpu, offline: false); |
12952 | |
12953 | list_for_each_entry_safe(eq, next, &phba->poll_list, _poll_list) { |
12954 | n = lpfc_find_cpu_handle(phba, id: eq->hdwq, LPFC_FIND_BY_HDWQ); |
12955 | if (n == cpu) |
12956 | lpfc_sli4_stop_polling(q: eq); |
12957 | } |
12958 | |
12959 | return 0; |
12960 | } |
12961 | |
12962 | /** |
12963 | * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device |
12964 | * @phba: pointer to lpfc hba data structure. |
12965 | * |
12966 | * This routine is invoked to enable the MSI-X interrupt vectors to device |
12967 | * with SLI-4 interface spec. It also allocates MSI-X vectors and maps them |
12968 | * to cpus on the system. |
12969 | * |
12970 | * When cfg_irq_numa is enabled, the adapter will only allocate vectors for |
12971 | * the number of cpus on the same numa node as this adapter. The vectors are |
12972 | * allocated without requesting OS affinity mapping. A vector will be |
12973 | * allocated and assigned to each online and offline cpu. If the cpu is |
12974 | * online, then affinity will be set to that cpu. If the cpu is offline, then |
12975 | * affinity will be set to the nearest peer cpu within the numa node that is |
12976 | * online. If there are no online cpus within the numa node, affinity is not |
12977 | * assigned and the OS may do as it pleases. Note: cpu vector affinity mapping |
12978 | * is consistent with the way cpu online/offline is handled when cfg_irq_numa is |
12979 | * configured. |
12980 | * |
12981 | * If numa mode is not enabled and there is more than 1 vector allocated, then |
12982 | * the driver relies on the managed irq interface where the OS assigns vector to |
12983 | * cpu affinity. The driver will then use that affinity mapping to setup its |
12984 | * cpu mapping table. |
12985 | * |
12986 | * Return codes |
12987 | * 0 - successful |
12988 | * other values - error |
12989 | **/ |
12990 | static int |
12991 | lpfc_sli4_enable_msix(struct lpfc_hba *phba) |
12992 | { |
12993 | int vectors, rc, index; |
12994 | char *name; |
12995 | const struct cpumask *aff_mask = NULL; |
12996 | unsigned int cpu = 0, cpu_cnt = 0, cpu_select = nr_cpu_ids; |
12997 | struct lpfc_vector_map_info *cpup; |
12998 | struct lpfc_hba_eq_hdl *eqhdl; |
12999 | const struct cpumask *maskp; |
13000 | unsigned int flags = PCI_IRQ_MSIX; |
13001 | |
13002 | /* Set up MSI-X multi-message vectors */ |
13003 | vectors = phba->cfg_irq_chann; |
13004 | |
13005 | if (phba->irq_chann_mode != NORMAL_MODE) |
13006 | aff_mask = &phba->sli4_hba.irq_aff_mask; |
13007 | |
13008 | if (aff_mask) { |
13009 | cpu_cnt = cpumask_weight(srcp: aff_mask); |
13010 | vectors = min(phba->cfg_irq_chann, cpu_cnt); |
13011 | |
13012 | /* cpu: iterates over aff_mask including offline or online |
13013 | * cpu_select: iterates over online aff_mask to set affinity |
13014 | */ |
13015 | cpu = cpumask_first(srcp: aff_mask); |
13016 | cpu_select = lpfc_next_online_cpu(mask: aff_mask, start: cpu); |
13017 | } else { |
13018 | flags |= PCI_IRQ_AFFINITY; |
13019 | } |
13020 | |
13021 | rc = pci_alloc_irq_vectors(dev: phba->pcidev, min_vecs: 1, max_vecs: vectors, flags); |
13022 | if (rc < 0) { |
13023 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
13024 | "0484 PCI enable MSI-X failed (%d)\n" , rc); |
13025 | goto vec_fail_out; |
13026 | } |
13027 | vectors = rc; |
13028 | |
13029 | /* Assign MSI-X vectors to interrupt handlers */ |
13030 | for (index = 0; index < vectors; index++) { |
13031 | eqhdl = lpfc_get_eq_hdl(index); |
13032 | name = eqhdl->handler_name; |
13033 | memset(name, 0, LPFC_SLI4_HANDLER_NAME_SZ); |
13034 | snprintf(buf: name, LPFC_SLI4_HANDLER_NAME_SZ, |
13035 | LPFC_DRIVER_HANDLER_NAME"%d" , index); |
13036 | |
13037 | eqhdl->idx = index; |
13038 | rc = pci_irq_vector(dev: phba->pcidev, nr: index); |
13039 | if (rc < 0) { |
13040 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
13041 | "0489 MSI-X fast-path (%d) " |
13042 | "pci_irq_vec failed (%d)\n" , index, rc); |
13043 | goto cfg_fail_out; |
13044 | } |
13045 | eqhdl->irq = rc; |
13046 | |
13047 | rc = request_threaded_irq(irq: eqhdl->irq, |
13048 | handler: &lpfc_sli4_hba_intr_handler, |
13049 | thread_fn: &lpfc_sli4_hba_intr_handler_th, |
13050 | IRQF_ONESHOT, name, dev: eqhdl); |
13051 | if (rc) { |
13052 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
13053 | "0486 MSI-X fast-path (%d) " |
13054 | "request_irq failed (%d)\n" , index, rc); |
13055 | goto cfg_fail_out; |
13056 | } |
13057 | |
13058 | if (aff_mask) { |
13059 | /* If found a neighboring online cpu, set affinity */ |
13060 | if (cpu_select < nr_cpu_ids) |
13061 | lpfc_irq_set_aff(eqhdl, cpu: cpu_select); |
13062 | |
13063 | /* Assign EQ to cpu_map */ |
13064 | lpfc_assign_eq_map_info(phba, eqidx: index, |
13065 | LPFC_CPU_FIRST_IRQ, |
13066 | cpu); |
13067 | |
13068 | /* Iterate to next offline or online cpu in aff_mask */ |
13069 | cpu = cpumask_next(n: cpu, srcp: aff_mask); |
13070 | |
13071 | /* Find next online cpu in aff_mask to set affinity */ |
13072 | cpu_select = lpfc_next_online_cpu(mask: aff_mask, start: cpu); |
13073 | } else if (vectors == 1) { |
13074 | cpu = cpumask_first(cpu_present_mask); |
13075 | lpfc_assign_eq_map_info(phba, eqidx: index, LPFC_CPU_FIRST_IRQ, |
13076 | cpu); |
13077 | } else { |
13078 | maskp = pci_irq_get_affinity(pdev: phba->pcidev, vec: index); |
13079 | |
13080 | /* Loop through all CPUs associated with vector index */ |
13081 | for_each_cpu_and(cpu, maskp, cpu_present_mask) { |
13082 | cpup = &phba->sli4_hba.cpu_map[cpu]; |
13083 | |
13084 | /* If this is the first CPU thats assigned to |
13085 | * this vector, set LPFC_CPU_FIRST_IRQ. |
13086 | * |
13087 | * With certain platforms its possible that irq |
13088 | * vectors are affinitized to all the cpu's. |
13089 | * This can result in each cpu_map.eq to be set |
13090 | * to the last vector, resulting in overwrite |
13091 | * of all the previous cpu_map.eq. Ensure that |
13092 | * each vector receives a place in cpu_map. |
13093 | * Later call to lpfc_cpu_affinity_check will |
13094 | * ensure we are nicely balanced out. |
13095 | */ |
13096 | if (cpup->eq != LPFC_VECTOR_MAP_EMPTY) |
13097 | continue; |
13098 | lpfc_assign_eq_map_info(phba, eqidx: index, |
13099 | LPFC_CPU_FIRST_IRQ, |
13100 | cpu); |
13101 | break; |
13102 | } |
13103 | } |
13104 | } |
13105 | |
13106 | if (vectors != phba->cfg_irq_chann) { |
13107 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
13108 | "3238 Reducing IO channels to match number of " |
13109 | "MSI-X vectors, requested %d got %d\n" , |
13110 | phba->cfg_irq_chann, vectors); |
13111 | if (phba->cfg_irq_chann > vectors) |
13112 | phba->cfg_irq_chann = vectors; |
13113 | } |
13114 | |
13115 | return rc; |
13116 | |
13117 | cfg_fail_out: |
13118 | /* free the irq already requested */ |
13119 | for (--index; index >= 0; index--) { |
13120 | eqhdl = lpfc_get_eq_hdl(index); |
13121 | lpfc_irq_clear_aff(eqhdl); |
13122 | free_irq(eqhdl->irq, eqhdl); |
13123 | } |
13124 | |
13125 | /* Unconfigure MSI-X capability structure */ |
13126 | pci_free_irq_vectors(dev: phba->pcidev); |
13127 | |
13128 | vec_fail_out: |
13129 | return rc; |
13130 | } |
13131 | |
13132 | /** |
13133 | * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device |
13134 | * @phba: pointer to lpfc hba data structure. |
13135 | * |
13136 | * This routine is invoked to enable the MSI interrupt mode to device with |
13137 | * SLI-4 interface spec. The kernel function pci_alloc_irq_vectors() is |
13138 | * called to enable the MSI vector. The device driver is responsible for |
13139 | * calling the request_irq() to register MSI vector with a interrupt the |
13140 | * handler, which is done in this function. |
13141 | * |
13142 | * Return codes |
13143 | * 0 - successful |
13144 | * other values - error |
13145 | **/ |
13146 | static int |
13147 | lpfc_sli4_enable_msi(struct lpfc_hba *phba) |
13148 | { |
13149 | int rc, index; |
13150 | unsigned int cpu; |
13151 | struct lpfc_hba_eq_hdl *eqhdl; |
13152 | |
13153 | rc = pci_alloc_irq_vectors(dev: phba->pcidev, min_vecs: 1, max_vecs: 1, |
13154 | PCI_IRQ_MSI | PCI_IRQ_AFFINITY); |
13155 | if (rc > 0) |
13156 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
13157 | "0487 PCI enable MSI mode success.\n" ); |
13158 | else { |
13159 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
13160 | "0488 PCI enable MSI mode failed (%d)\n" , rc); |
13161 | return rc ? rc : -1; |
13162 | } |
13163 | |
13164 | rc = request_irq(irq: phba->pcidev->irq, handler: lpfc_sli4_intr_handler, |
13165 | flags: 0, LPFC_DRIVER_NAME, dev: phba); |
13166 | if (rc) { |
13167 | pci_free_irq_vectors(dev: phba->pcidev); |
13168 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
13169 | "0490 MSI request_irq failed (%d)\n" , rc); |
13170 | return rc; |
13171 | } |
13172 | |
13173 | eqhdl = lpfc_get_eq_hdl(0); |
13174 | rc = pci_irq_vector(dev: phba->pcidev, nr: 0); |
13175 | if (rc < 0) { |
13176 | pci_free_irq_vectors(dev: phba->pcidev); |
13177 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
13178 | "0496 MSI pci_irq_vec failed (%d)\n" , rc); |
13179 | return rc; |
13180 | } |
13181 | eqhdl->irq = rc; |
13182 | |
13183 | cpu = cpumask_first(cpu_present_mask); |
13184 | lpfc_assign_eq_map_info(phba, eqidx: 0, LPFC_CPU_FIRST_IRQ, cpu); |
13185 | |
13186 | for (index = 0; index < phba->cfg_irq_chann; index++) { |
13187 | eqhdl = lpfc_get_eq_hdl(index); |
13188 | eqhdl->idx = index; |
13189 | } |
13190 | |
13191 | return 0; |
13192 | } |
13193 | |
13194 | /** |
13195 | * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device |
13196 | * @phba: pointer to lpfc hba data structure. |
13197 | * @cfg_mode: Interrupt configuration mode (INTx, MSI or MSI-X). |
13198 | * |
13199 | * This routine is invoked to enable device interrupt and associate driver's |
13200 | * interrupt handler(s) to interrupt vector(s) to device with SLI-4 |
13201 | * interface spec. Depends on the interrupt mode configured to the driver, |
13202 | * the driver will try to fallback from the configured interrupt mode to an |
13203 | * interrupt mode which is supported by the platform, kernel, and device in |
13204 | * the order of: |
13205 | * MSI-X -> MSI -> IRQ. |
13206 | * |
13207 | * Return codes |
13208 | * Interrupt mode (2, 1, 0) - successful |
13209 | * LPFC_INTR_ERROR - error |
13210 | **/ |
13211 | static uint32_t |
13212 | lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode) |
13213 | { |
13214 | uint32_t intr_mode = LPFC_INTR_ERROR; |
13215 | int retval, idx; |
13216 | |
13217 | if (cfg_mode == 2) { |
13218 | /* Preparation before conf_msi mbox cmd */ |
13219 | retval = 0; |
13220 | if (!retval) { |
13221 | /* Now, try to enable MSI-X interrupt mode */ |
13222 | retval = lpfc_sli4_enable_msix(phba); |
13223 | if (!retval) { |
13224 | /* Indicate initialization to MSI-X mode */ |
13225 | phba->intr_type = MSIX; |
13226 | intr_mode = 2; |
13227 | } |
13228 | } |
13229 | } |
13230 | |
13231 | /* Fallback to MSI if MSI-X initialization failed */ |
13232 | if (cfg_mode >= 1 && phba->intr_type == NONE) { |
13233 | retval = lpfc_sli4_enable_msi(phba); |
13234 | if (!retval) { |
13235 | /* Indicate initialization to MSI mode */ |
13236 | phba->intr_type = MSI; |
13237 | intr_mode = 1; |
13238 | } |
13239 | } |
13240 | |
13241 | /* Fallback to INTx if both MSI-X/MSI initalization failed */ |
13242 | if (phba->intr_type == NONE) { |
13243 | retval = request_irq(irq: phba->pcidev->irq, handler: lpfc_sli4_intr_handler, |
13244 | IRQF_SHARED, LPFC_DRIVER_NAME, dev: phba); |
13245 | if (!retval) { |
13246 | struct lpfc_hba_eq_hdl *eqhdl; |
13247 | unsigned int cpu; |
13248 | |
13249 | /* Indicate initialization to INTx mode */ |
13250 | phba->intr_type = INTx; |
13251 | intr_mode = 0; |
13252 | |
13253 | eqhdl = lpfc_get_eq_hdl(0); |
13254 | retval = pci_irq_vector(dev: phba->pcidev, nr: 0); |
13255 | if (retval < 0) { |
13256 | lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, |
13257 | "0502 INTR pci_irq_vec failed (%d)\n" , |
13258 | retval); |
13259 | return LPFC_INTR_ERROR; |
13260 | } |
13261 | eqhdl->irq = retval; |
13262 | |
13263 | cpu = cpumask_first(cpu_present_mask); |
13264 | lpfc_assign_eq_map_info(phba, eqidx: 0, LPFC_CPU_FIRST_IRQ, |
13265 | cpu); |
13266 | for (idx = 0; idx < phba->cfg_irq_chann; idx++) { |
13267 | eqhdl = lpfc_get_eq_hdl(idx); |
13268 | eqhdl->idx = idx; |
13269 | } |
13270 | } |
13271 | } |
13272 | return intr_mode; |
13273 | } |
13274 | |
13275 | /** |
13276 | * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device |
13277 | * @phba: pointer to lpfc hba data structure. |
13278 | * |
13279 | * This routine is invoked to disable device interrupt and disassociate |
13280 | * the driver's interrupt handler(s) from interrupt vector(s) to device |
13281 | * with SLI-4 interface spec. Depending on the interrupt mode, the driver |
13282 | * will release the interrupt vector(s) for the message signaled interrupt. |
13283 | **/ |
13284 | static void |
13285 | lpfc_sli4_disable_intr(struct lpfc_hba *phba) |
13286 | { |
13287 | /* Disable the currently initialized interrupt mode */ |
13288 | if (phba->intr_type == MSIX) { |
13289 | int index; |
13290 | struct lpfc_hba_eq_hdl *eqhdl; |
13291 | |
13292 | /* Free up MSI-X multi-message vectors */ |
13293 | for (index = 0; index < phba->cfg_irq_chann; index++) { |
13294 | eqhdl = lpfc_get_eq_hdl(index); |
13295 | lpfc_irq_clear_aff(eqhdl); |
13296 | free_irq(eqhdl->irq, eqhdl); |
13297 | } |
13298 | } else { |
13299 | free_irq(phba->pcidev->irq, phba); |
13300 | } |
13301 | |
13302 | pci_free_irq_vectors(dev: phba->pcidev); |
13303 | |
13304 | /* Reset interrupt management states */ |
13305 | phba->intr_type = NONE; |
13306 | phba->sli.slistat.sli_intr = 0; |
13307 | } |
13308 | |
13309 | /** |
13310 | * lpfc_unset_hba - Unset SLI3 hba device initialization |
13311 | * @phba: pointer to lpfc hba data structure. |
13312 | * |
13313 | * This routine is invoked to unset the HBA device initialization steps to |
13314 | * a device with SLI-3 interface spec. |
13315 | **/ |
13316 | static void |
13317 | lpfc_unset_hba(struct lpfc_hba *phba) |
13318 | { |
13319 | struct lpfc_vport *vport = phba->pport; |
13320 | struct Scsi_Host *shost = lpfc_shost_from_vport(vport); |
13321 | |
13322 | spin_lock_irq(lock: shost->host_lock); |
13323 | vport->load_flag |= FC_UNLOADING; |
13324 | spin_unlock_irq(lock: shost->host_lock); |
13325 | |
13326 | kfree(objp: phba->vpi_bmask); |
13327 | kfree(objp: phba->vpi_ids); |
13328 | |
13329 | lpfc_stop_hba_timers(phba); |
13330 | |
13331 | phba->pport->work_port_events = 0; |
13332 | |
13333 | lpfc_sli_hba_down(phba); |
13334 | |
13335 | lpfc_sli_brdrestart(phba); |
13336 | |
13337 | lpfc_sli_disable_intr(phba); |
13338 | |
13339 | return; |
13340 | } |
13341 | |
13342 | /** |
13343 | * lpfc_sli4_xri_exchange_busy_wait - Wait for device XRI exchange busy |
13344 | * @phba: Pointer to HBA context object. |
13345 | * |
13346 | * This function is called in the SLI4 code path to wait for completion |
13347 | * of device's XRIs exchange busy. It will check the XRI exchange busy |
13348 | * on outstanding FCP and ELS I/Os every 10ms for up to 10 seconds; after |
13349 | * that, it will check the XRI exchange busy on outstanding FCP and ELS |
13350 | * I/Os every 30 seconds, log error message, and wait forever. Only when |
13351 | * all XRI exchange busy complete, the driver unload shall proceed with |
13352 | * invoking the function reset ioctl mailbox command to the CNA and the |
13353 | * the rest of the driver unload resource release. |
13354 | **/ |
13355 | static void |
13356 | lpfc_sli4_xri_exchange_busy_wait(struct lpfc_hba *phba) |
13357 | { |
13358 | struct lpfc_sli4_hdw_queue *qp; |
13359 | int idx, ccnt; |
13360 | int wait_time = 0; |
13361 | int io_xri_cmpl = 1; |
13362 | int nvmet_xri_cmpl = 1; |
13363 | int els_xri_cmpl = list_empty(head: &phba->sli4_hba.lpfc_abts_els_sgl_list); |
13364 | |
13365 | /* Driver just aborted IOs during the hba_unset process. Pause |
13366 | * here to give the HBA time to complete the IO and get entries |
13367 | * into the abts lists. |
13368 | */ |
13369 | msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1 * 5); |
13370 | |
13371 | /* Wait for NVME pending IO to flush back to transport. */ |
13372 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
13373 | lpfc_nvme_wait_for_io_drain(phba); |
13374 | |
13375 | ccnt = 0; |
13376 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
13377 | qp = &phba->sli4_hba.hdwq[idx]; |
13378 | io_xri_cmpl = list_empty(head: &qp->lpfc_abts_io_buf_list); |
13379 | if (!io_xri_cmpl) /* if list is NOT empty */ |
13380 | ccnt++; |
13381 | } |
13382 | if (ccnt) |
13383 | io_xri_cmpl = 0; |
13384 | |
13385 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
13386 | nvmet_xri_cmpl = |
13387 | list_empty(head: &phba->sli4_hba.lpfc_abts_nvmet_ctx_list); |
13388 | } |
13389 | |
13390 | while (!els_xri_cmpl || !io_xri_cmpl || !nvmet_xri_cmpl) { |
13391 | if (wait_time > LPFC_XRI_EXCH_BUSY_WAIT_TMO) { |
13392 | if (!nvmet_xri_cmpl) |
13393 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
13394 | "6424 NVMET XRI exchange busy " |
13395 | "wait time: %d seconds.\n" , |
13396 | wait_time/1000); |
13397 | if (!io_xri_cmpl) |
13398 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
13399 | "6100 IO XRI exchange busy " |
13400 | "wait time: %d seconds.\n" , |
13401 | wait_time/1000); |
13402 | if (!els_xri_cmpl) |
13403 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
13404 | "2878 ELS XRI exchange busy " |
13405 | "wait time: %d seconds.\n" , |
13406 | wait_time/1000); |
13407 | msleep(LPFC_XRI_EXCH_BUSY_WAIT_T2); |
13408 | wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T2; |
13409 | } else { |
13410 | msleep(LPFC_XRI_EXCH_BUSY_WAIT_T1); |
13411 | wait_time += LPFC_XRI_EXCH_BUSY_WAIT_T1; |
13412 | } |
13413 | |
13414 | ccnt = 0; |
13415 | for (idx = 0; idx < phba->cfg_hdw_queue; idx++) { |
13416 | qp = &phba->sli4_hba.hdwq[idx]; |
13417 | io_xri_cmpl = list_empty( |
13418 | head: &qp->lpfc_abts_io_buf_list); |
13419 | if (!io_xri_cmpl) /* if list is NOT empty */ |
13420 | ccnt++; |
13421 | } |
13422 | if (ccnt) |
13423 | io_xri_cmpl = 0; |
13424 | |
13425 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
13426 | nvmet_xri_cmpl = list_empty( |
13427 | head: &phba->sli4_hba.lpfc_abts_nvmet_ctx_list); |
13428 | } |
13429 | els_xri_cmpl = |
13430 | list_empty(head: &phba->sli4_hba.lpfc_abts_els_sgl_list); |
13431 | |
13432 | } |
13433 | } |
13434 | |
13435 | /** |
13436 | * lpfc_sli4_hba_unset - Unset the fcoe hba |
13437 | * @phba: Pointer to HBA context object. |
13438 | * |
13439 | * This function is called in the SLI4 code path to reset the HBA's FCoE |
13440 | * function. The caller is not required to hold any lock. This routine |
13441 | * issues PCI function reset mailbox command to reset the FCoE function. |
13442 | * At the end of the function, it calls lpfc_hba_down_post function to |
13443 | * free any pending commands. |
13444 | **/ |
13445 | static void |
13446 | lpfc_sli4_hba_unset(struct lpfc_hba *phba) |
13447 | { |
13448 | int wait_cnt = 0; |
13449 | LPFC_MBOXQ_t *mboxq; |
13450 | struct pci_dev *pdev = phba->pcidev; |
13451 | |
13452 | lpfc_stop_hba_timers(phba); |
13453 | hrtimer_cancel(timer: &phba->cmf_stats_timer); |
13454 | hrtimer_cancel(timer: &phba->cmf_timer); |
13455 | |
13456 | if (phba->pport) |
13457 | phba->sli4_hba.intr_enable = 0; |
13458 | |
13459 | /* |
13460 | * Gracefully wait out the potential current outstanding asynchronous |
13461 | * mailbox command. |
13462 | */ |
13463 | |
13464 | /* First, block any pending async mailbox command from posted */ |
13465 | spin_lock_irq(lock: &phba->hbalock); |
13466 | phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK; |
13467 | spin_unlock_irq(lock: &phba->hbalock); |
13468 | /* Now, trying to wait it out if we can */ |
13469 | while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) { |
13470 | msleep(msecs: 10); |
13471 | if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT) |
13472 | break; |
13473 | } |
13474 | /* Forcefully release the outstanding mailbox command if timed out */ |
13475 | if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) { |
13476 | spin_lock_irq(lock: &phba->hbalock); |
13477 | mboxq = phba->sli.mbox_active; |
13478 | mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED; |
13479 | __lpfc_mbox_cmpl_put(phba, mboxq); |
13480 | phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE; |
13481 | phba->sli.mbox_active = NULL; |
13482 | spin_unlock_irq(lock: &phba->hbalock); |
13483 | } |
13484 | |
13485 | /* Abort all iocbs associated with the hba */ |
13486 | lpfc_sli_hba_iocb_abort(phba); |
13487 | |
13488 | if (!pci_channel_offline(pdev: phba->pcidev)) |
13489 | /* Wait for completion of device XRI exchange busy */ |
13490 | lpfc_sli4_xri_exchange_busy_wait(phba); |
13491 | |
13492 | /* per-phba callback de-registration for hotplug event */ |
13493 | if (phba->pport) |
13494 | lpfc_cpuhp_remove(phba); |
13495 | |
13496 | /* Disable PCI subsystem interrupt */ |
13497 | lpfc_sli4_disable_intr(phba); |
13498 | |
13499 | /* Disable SR-IOV if enabled */ |
13500 | if (phba->cfg_sriov_nr_virtfn) |
13501 | pci_disable_sriov(dev: pdev); |
13502 | |
13503 | /* Stop kthread signal shall trigger work_done one more time */ |
13504 | kthread_stop(k: phba->worker_thread); |
13505 | |
13506 | /* Disable FW logging to host memory */ |
13507 | lpfc_ras_stop_fwlog(phba); |
13508 | |
13509 | /* Reset SLI4 HBA FCoE function */ |
13510 | lpfc_pci_function_reset(phba); |
13511 | |
13512 | /* release all queue allocated resources. */ |
13513 | lpfc_sli4_queue_destroy(phba); |
13514 | |
13515 | /* Free RAS DMA memory */ |
13516 | if (phba->ras_fwlog.ras_enabled) |
13517 | lpfc_sli4_ras_dma_free(phba); |
13518 | |
13519 | /* Stop the SLI4 device port */ |
13520 | if (phba->pport) |
13521 | phba->pport->work_port_events = 0; |
13522 | } |
13523 | |
13524 | static uint32_t |
13525 | lpfc_cgn_crc32(uint32_t crc, u8 byte) |
13526 | { |
13527 | uint32_t msb = 0; |
13528 | uint32_t bit; |
13529 | |
13530 | for (bit = 0; bit < 8; bit++) { |
13531 | msb = (crc >> 31) & 1; |
13532 | crc <<= 1; |
13533 | |
13534 | if (msb ^ (byte & 1)) { |
13535 | crc ^= LPFC_CGN_CRC32_MAGIC_NUMBER; |
13536 | crc |= 1; |
13537 | } |
13538 | byte >>= 1; |
13539 | } |
13540 | return crc; |
13541 | } |
13542 | |
13543 | static uint32_t |
13544 | lpfc_cgn_reverse_bits(uint32_t wd) |
13545 | { |
13546 | uint32_t result = 0; |
13547 | uint32_t i; |
13548 | |
13549 | for (i = 0; i < 32; i++) { |
13550 | result <<= 1; |
13551 | result |= (1 & (wd >> i)); |
13552 | } |
13553 | return result; |
13554 | } |
13555 | |
13556 | /* |
13557 | * The routine corresponds with the algorithm the HBA firmware |
13558 | * uses to validate the data integrity. |
13559 | */ |
13560 | uint32_t |
13561 | lpfc_cgn_calc_crc32(void *ptr, uint32_t byteLen, uint32_t crc) |
13562 | { |
13563 | uint32_t i; |
13564 | uint32_t result; |
13565 | uint8_t *data = (uint8_t *)ptr; |
13566 | |
13567 | for (i = 0; i < byteLen; ++i) |
13568 | crc = lpfc_cgn_crc32(crc, byte: data[i]); |
13569 | |
13570 | result = ~lpfc_cgn_reverse_bits(wd: crc); |
13571 | return result; |
13572 | } |
13573 | |
13574 | void |
13575 | lpfc_init_congestion_buf(struct lpfc_hba *phba) |
13576 | { |
13577 | struct lpfc_cgn_info *cp; |
13578 | uint16_t size; |
13579 | uint32_t crc; |
13580 | |
13581 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
13582 | "6235 INIT Congestion Buffer %p\n" , phba->cgn_i); |
13583 | |
13584 | if (!phba->cgn_i) |
13585 | return; |
13586 | cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; |
13587 | |
13588 | atomic_set(v: &phba->cgn_fabric_warn_cnt, i: 0); |
13589 | atomic_set(v: &phba->cgn_fabric_alarm_cnt, i: 0); |
13590 | atomic_set(v: &phba->cgn_sync_alarm_cnt, i: 0); |
13591 | atomic_set(v: &phba->cgn_sync_warn_cnt, i: 0); |
13592 | |
13593 | atomic_set(v: &phba->cgn_driver_evt_cnt, i: 0); |
13594 | atomic_set(v: &phba->cgn_latency_evt_cnt, i: 0); |
13595 | atomic64_set(v: &phba->cgn_latency_evt, i: 0); |
13596 | phba->cgn_evt_minute = 0; |
13597 | |
13598 | memset(cp, 0xff, offsetof(struct lpfc_cgn_info, cgn_stat)); |
13599 | cp->cgn_info_size = cpu_to_le16(LPFC_CGN_INFO_SZ); |
13600 | cp->cgn_info_version = LPFC_CGN_INFO_V4; |
13601 | |
13602 | /* cgn parameters */ |
13603 | cp->cgn_info_mode = phba->cgn_p.cgn_param_mode; |
13604 | cp->cgn_info_level0 = phba->cgn_p.cgn_param_level0; |
13605 | cp->cgn_info_level1 = phba->cgn_p.cgn_param_level1; |
13606 | cp->cgn_info_level2 = phba->cgn_p.cgn_param_level2; |
13607 | |
13608 | lpfc_cgn_update_tstamp(phba, ts: &cp->base_time); |
13609 | |
13610 | /* Fill in default LUN qdepth */ |
13611 | if (phba->pport) { |
13612 | size = (uint16_t)(phba->pport->cfg_lun_queue_depth); |
13613 | cp->cgn_lunq = cpu_to_le16(size); |
13614 | } |
13615 | |
13616 | /* last used Index initialized to 0xff already */ |
13617 | |
13618 | cp->cgn_warn_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); |
13619 | cp->cgn_alarm_freq = cpu_to_le16(LPFC_FPIN_INIT_FREQ); |
13620 | crc = lpfc_cgn_calc_crc32(ptr: cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); |
13621 | cp->cgn_info_crc = cpu_to_le32(crc); |
13622 | |
13623 | phba->cgn_evt_timestamp = jiffies + |
13624 | msecs_to_jiffies(LPFC_CGN_TIMER_TO_MIN); |
13625 | } |
13626 | |
13627 | void |
13628 | lpfc_init_congestion_stat(struct lpfc_hba *phba) |
13629 | { |
13630 | struct lpfc_cgn_info *cp; |
13631 | uint32_t crc; |
13632 | |
13633 | lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, |
13634 | "6236 INIT Congestion Stat %p\n" , phba->cgn_i); |
13635 | |
13636 | if (!phba->cgn_i) |
13637 | return; |
13638 | |
13639 | cp = (struct lpfc_cgn_info *)phba->cgn_i->virt; |
13640 | memset(&cp->cgn_stat, 0, sizeof(cp->cgn_stat)); |
13641 | |
13642 | lpfc_cgn_update_tstamp(phba, ts: &cp->stat_start); |
13643 | crc = lpfc_cgn_calc_crc32(ptr: cp, LPFC_CGN_INFO_SZ, LPFC_CGN_CRC32_SEED); |
13644 | cp->cgn_info_crc = cpu_to_le32(crc); |
13645 | } |
13646 | |
13647 | /** |
13648 | * __lpfc_reg_congestion_buf - register congestion info buffer with HBA |
13649 | * @phba: Pointer to hba context object. |
13650 | * @reg: flag to determine register or unregister. |
13651 | */ |
13652 | static int |
13653 | __lpfc_reg_congestion_buf(struct lpfc_hba *phba, int reg) |
13654 | { |
13655 | struct lpfc_mbx_reg_congestion_buf *reg_congestion_buf; |
13656 | union lpfc_sli4_cfg_shdr *shdr; |
13657 | uint32_t shdr_status, shdr_add_status; |
13658 | LPFC_MBOXQ_t *mboxq; |
13659 | int length, rc; |
13660 | |
13661 | if (!phba->cgn_i) |
13662 | return -ENXIO; |
13663 | |
13664 | mboxq = mempool_alloc(pool: phba->mbox_mem_pool, GFP_KERNEL); |
13665 | if (!mboxq) { |
13666 | lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, |
13667 | "2641 REG_CONGESTION_BUF mbox allocation fail: " |
13668 | "HBA state x%x reg %d\n" , |
13669 | phba->pport->port_state, reg); |
13670 | return -ENOMEM; |
13671 | } |
13672 | |
13673 | length = (sizeof(struct lpfc_mbx_reg_congestion_buf) - |
13674 | sizeof(struct lpfc_sli4_cfg_mhdr)); |
13675 | lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, |
13676 | LPFC_MBOX_OPCODE_REG_CONGESTION_BUF, length, |
13677 | LPFC_SLI4_MBX_EMBED); |
13678 | reg_congestion_buf = &mboxq->u.mqe.un.reg_congestion_buf; |
13679 | bf_set(lpfc_mbx_reg_cgn_buf_type, reg_congestion_buf, 1); |
13680 | if (reg > 0) |
13681 | bf_set(lpfc_mbx_reg_cgn_buf_cnt, reg_congestion_buf, 1); |
13682 | else |
13683 | bf_set(lpfc_mbx_reg_cgn_buf_cnt, reg_congestion_buf, 0); |
13684 | reg_congestion_buf->length = sizeof(struct lpfc_cgn_info); |
13685 | reg_congestion_buf->addr_lo = |
13686 | putPaddrLow(phba->cgn_i->phys); |
13687 | reg_congestion_buf->addr_hi = |
13688 | putPaddrHigh(phba->cgn_i->phys); |
13689 | |
13690 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
13691 | shdr = (union lpfc_sli4_cfg_shdr *) |
13692 | &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; |
13693 | shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); |
13694 | shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, |
13695 | &shdr->response); |
13696 | mempool_free(element: mboxq, pool: phba->mbox_mem_pool); |
13697 | if (shdr_status || shdr_add_status || rc) { |
13698 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
13699 | "2642 REG_CONGESTION_BUF mailbox " |
13700 | "failed with status x%x add_status x%x," |
13701 | " mbx status x%x reg %d\n" , |
13702 | shdr_status, shdr_add_status, rc, reg); |
13703 | return -ENXIO; |
13704 | } |
13705 | return 0; |
13706 | } |
13707 | |
13708 | int |
13709 | lpfc_unreg_congestion_buf(struct lpfc_hba *phba) |
13710 | { |
13711 | lpfc_cmf_stop(phba); |
13712 | return __lpfc_reg_congestion_buf(phba, reg: 0); |
13713 | } |
13714 | |
13715 | int |
13716 | lpfc_reg_congestion_buf(struct lpfc_hba *phba) |
13717 | { |
13718 | return __lpfc_reg_congestion_buf(phba, reg: 1); |
13719 | } |
13720 | |
13721 | /** |
13722 | * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS. |
13723 | * @phba: Pointer to HBA context object. |
13724 | * @mboxq: Pointer to the mailboxq memory for the mailbox command response. |
13725 | * |
13726 | * This function is called in the SLI4 code path to read the port's |
13727 | * sli4 capabilities. |
13728 | * |
13729 | * This function may be be called from any context that can block-wait |
13730 | * for the completion. The expectation is that this routine is called |
13731 | * typically from probe_one or from the online routine. |
13732 | **/ |
13733 | int |
13734 | lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) |
13735 | { |
13736 | int rc; |
13737 | struct lpfc_mqe *mqe = &mboxq->u.mqe; |
13738 | struct lpfc_pc_sli4_params *sli4_params; |
13739 | uint32_t mbox_tmo; |
13740 | int length; |
13741 | bool exp_wqcq_pages = true; |
13742 | struct lpfc_sli4_parameters *mbx_sli4_parameters; |
13743 | |
13744 | /* |
13745 | * By default, the driver assumes the SLI4 port requires RPI |
13746 | * header postings. The SLI4_PARAM response will correct this |
13747 | * assumption. |
13748 | */ |
13749 | phba->sli4_hba.rpi_hdrs_in_use = 1; |
13750 | |
13751 | /* Read the port's SLI4 Config Parameters */ |
13752 | length = (sizeof(struct lpfc_mbx_get_sli4_parameters) - |
13753 | sizeof(struct lpfc_sli4_cfg_mhdr)); |
13754 | lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, |
13755 | LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS, |
13756 | length, LPFC_SLI4_MBX_EMBED); |
13757 | if (!phba->sli4_hba.intr_enable) |
13758 | rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); |
13759 | else { |
13760 | mbox_tmo = lpfc_mbox_tmo_val(phba, mboxq); |
13761 | rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo); |
13762 | } |
13763 | if (unlikely(rc)) |
13764 | return rc; |
13765 | sli4_params = &phba->sli4_hba.pc_sli4_params; |
13766 | mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters; |
13767 | sli4_params->if_type = bf_get(cfg_if_type, mbx_sli4_parameters); |
13768 | sli4_params->sli_rev = bf_get(cfg_sli_rev, mbx_sli4_parameters); |
13769 | sli4_params->sli_family = bf_get(cfg_sli_family, mbx_sli4_parameters); |
13770 | sli4_params->featurelevel_1 = bf_get(cfg_sli_hint_1, |
13771 | mbx_sli4_parameters); |
13772 | sli4_params->featurelevel_2 = bf_get(cfg_sli_hint_2, |
13773 | mbx_sli4_parameters); |
13774 | if (bf_get(cfg_phwq, mbx_sli4_parameters)) |
13775 | phba->sli3_options |= LPFC_SLI4_PHWQ_ENABLED; |
13776 | else |
13777 | phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED; |
13778 | sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len; |
13779 | sli4_params->loopbk_scope = bf_get(cfg_loopbk_scope, |
13780 | mbx_sli4_parameters); |
13781 | sli4_params->oas_supported = bf_get(cfg_oas, mbx_sli4_parameters); |
13782 | sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters); |
13783 | sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters); |
13784 | sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters); |
13785 | sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters); |
13786 | sli4_params->eqav = bf_get(cfg_eqav, mbx_sli4_parameters); |
13787 | sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters); |
13788 | sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters); |
13789 | sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters); |
13790 | sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters); |
13791 | sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt, |
13792 | mbx_sli4_parameters); |
13793 | sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters); |
13794 | sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align, |
13795 | mbx_sli4_parameters); |
13796 | phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters); |
13797 | phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters); |
13798 | sli4_params->mi_cap = bf_get(cfg_mi_ver, mbx_sli4_parameters); |
13799 | |
13800 | /* Check for Extended Pre-Registered SGL support */ |
13801 | phba->cfg_xpsgl = bf_get(cfg_xpsgl, mbx_sli4_parameters); |
13802 | |
13803 | /* Check for firmware nvme support */ |
13804 | rc = (bf_get(cfg_nvme, mbx_sli4_parameters) && |
13805 | bf_get(cfg_xib, mbx_sli4_parameters)); |
13806 | |
13807 | if (rc) { |
13808 | /* Save this to indicate the Firmware supports NVME */ |
13809 | sli4_params->nvme = 1; |
13810 | |
13811 | /* Firmware NVME support, check driver FC4 NVME support */ |
13812 | if (phba->cfg_enable_fc4_type == LPFC_ENABLE_FCP) { |
13813 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME, |
13814 | "6133 Disabling NVME support: " |
13815 | "FC4 type not supported: x%x\n" , |
13816 | phba->cfg_enable_fc4_type); |
13817 | goto fcponly; |
13818 | } |
13819 | } else { |
13820 | /* No firmware NVME support, check driver FC4 NVME support */ |
13821 | sli4_params->nvme = 0; |
13822 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
13823 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_NVME, |
13824 | "6101 Disabling NVME support: Not " |
13825 | "supported by firmware (%d %d) x%x\n" , |
13826 | bf_get(cfg_nvme, mbx_sli4_parameters), |
13827 | bf_get(cfg_xib, mbx_sli4_parameters), |
13828 | phba->cfg_enable_fc4_type); |
13829 | fcponly: |
13830 | phba->nvmet_support = 0; |
13831 | phba->cfg_nvmet_mrq = 0; |
13832 | phba->cfg_nvme_seg_cnt = 0; |
13833 | |
13834 | /* If no FC4 type support, move to just SCSI support */ |
13835 | if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP)) |
13836 | return -ENODEV; |
13837 | phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP; |
13838 | } |
13839 | } |
13840 | |
13841 | /* If the NVME FC4 type is enabled, scale the sg_seg_cnt to |
13842 | * accommodate 512K and 1M IOs in a single nvme buf. |
13843 | */ |
13844 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) |
13845 | phba->cfg_sg_seg_cnt = LPFC_MAX_NVME_SEG_CNT; |
13846 | |
13847 | /* Enable embedded Payload BDE if support is indicated */ |
13848 | if (bf_get(cfg_pbde, mbx_sli4_parameters)) |
13849 | phba->cfg_enable_pbde = 1; |
13850 | else |
13851 | phba->cfg_enable_pbde = 0; |
13852 | |
13853 | /* |
13854 | * To support Suppress Response feature we must satisfy 3 conditions. |
13855 | * lpfc_suppress_rsp module parameter must be set (default). |
13856 | * In SLI4-Parameters Descriptor: |
13857 | * Extended Inline Buffers (XIB) must be supported. |
13858 | * Suppress Response IU Not Supported (SRIUNS) must NOT be supported |
13859 | * (double negative). |
13860 | */ |
13861 | if (phba->cfg_suppress_rsp && bf_get(cfg_xib, mbx_sli4_parameters) && |
13862 | !(bf_get(cfg_nosr, mbx_sli4_parameters))) |
13863 | phba->sli.sli_flag |= LPFC_SLI_SUPPRESS_RSP; |
13864 | else |
13865 | phba->cfg_suppress_rsp = 0; |
13866 | |
13867 | if (bf_get(cfg_eqdr, mbx_sli4_parameters)) |
13868 | phba->sli.sli_flag |= LPFC_SLI_USE_EQDR; |
13869 | |
13870 | /* Make sure that sge_supp_len can be handled by the driver */ |
13871 | if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) |
13872 | sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; |
13873 | |
13874 | rc = dma_set_max_seg_size(dev: &phba->pcidev->dev, size: sli4_params->sge_supp_len); |
13875 | if (unlikely(rc)) { |
13876 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
13877 | "6400 Can't set dma maximum segment size\n" ); |
13878 | return rc; |
13879 | } |
13880 | |
13881 | /* |
13882 | * Check whether the adapter supports an embedded copy of the |
13883 | * FCP CMD IU within the WQE for FCP_Ixxx commands. In order |
13884 | * to use this option, 128-byte WQEs must be used. |
13885 | */ |
13886 | if (bf_get(cfg_ext_embed_cb, mbx_sli4_parameters)) |
13887 | phba->fcp_embed_io = 1; |
13888 | else |
13889 | phba->fcp_embed_io = 0; |
13890 | |
13891 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT | LOG_NVME, |
13892 | "6422 XIB %d PBDE %d: FCP %d NVME %d %d %d\n" , |
13893 | bf_get(cfg_xib, mbx_sli4_parameters), |
13894 | phba->cfg_enable_pbde, |
13895 | phba->fcp_embed_io, sli4_params->nvme, |
13896 | phba->cfg_nvme_embed_cmd, phba->cfg_suppress_rsp); |
13897 | |
13898 | if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == |
13899 | LPFC_SLI_INTF_IF_TYPE_2) && |
13900 | (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) == |
13901 | LPFC_SLI_INTF_FAMILY_LNCR_A0)) |
13902 | exp_wqcq_pages = false; |
13903 | |
13904 | if ((bf_get(cfg_cqpsize, mbx_sli4_parameters) & LPFC_CQ_16K_PAGE_SZ) && |
13905 | (bf_get(cfg_wqpsize, mbx_sli4_parameters) & LPFC_WQ_16K_PAGE_SZ) && |
13906 | exp_wqcq_pages && |
13907 | (sli4_params->wqsize & LPFC_WQ_SZ128_SUPPORT)) |
13908 | phba->enab_exp_wqcq_pages = 1; |
13909 | else |
13910 | phba->enab_exp_wqcq_pages = 0; |
13911 | /* |
13912 | * Check if the SLI port supports MDS Diagnostics |
13913 | */ |
13914 | if (bf_get(cfg_mds_diags, mbx_sli4_parameters)) |
13915 | phba->mds_diags_support = 1; |
13916 | else |
13917 | phba->mds_diags_support = 0; |
13918 | |
13919 | /* |
13920 | * Check if the SLI port supports NSLER |
13921 | */ |
13922 | if (bf_get(cfg_nsler, mbx_sli4_parameters)) |
13923 | phba->nsler = 1; |
13924 | else |
13925 | phba->nsler = 0; |
13926 | |
13927 | return 0; |
13928 | } |
13929 | |
13930 | /** |
13931 | * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem. |
13932 | * @pdev: pointer to PCI device |
13933 | * @pid: pointer to PCI device identifier |
13934 | * |
13935 | * This routine is to be called to attach a device with SLI-3 interface spec |
13936 | * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is |
13937 | * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific |
13938 | * information of the device and driver to see if the driver state that it can |
13939 | * support this kind of device. If the match is successful, the driver core |
13940 | * invokes this routine. If this routine determines it can claim the HBA, it |
13941 | * does all the initialization that it needs to do to handle the HBA properly. |
13942 | * |
13943 | * Return code |
13944 | * 0 - driver can claim the device |
13945 | * negative value - driver can not claim the device |
13946 | **/ |
13947 | static int |
13948 | lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid) |
13949 | { |
13950 | struct lpfc_hba *phba; |
13951 | struct lpfc_vport *vport = NULL; |
13952 | struct Scsi_Host *shost = NULL; |
13953 | int error; |
13954 | uint32_t cfg_mode, intr_mode; |
13955 | |
13956 | /* Allocate memory for HBA structure */ |
13957 | phba = lpfc_hba_alloc(pdev); |
13958 | if (!phba) |
13959 | return -ENOMEM; |
13960 | |
13961 | /* Perform generic PCI device enabling operation */ |
13962 | error = lpfc_enable_pci_dev(phba); |
13963 | if (error) |
13964 | goto out_free_phba; |
13965 | |
13966 | /* Set up SLI API function jump table for PCI-device group-0 HBAs */ |
13967 | error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP); |
13968 | if (error) |
13969 | goto out_disable_pci_dev; |
13970 | |
13971 | /* Set up SLI-3 specific device PCI memory space */ |
13972 | error = lpfc_sli_pci_mem_setup(phba); |
13973 | if (error) { |
13974 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
13975 | "1402 Failed to set up pci memory space.\n" ); |
13976 | goto out_disable_pci_dev; |
13977 | } |
13978 | |
13979 | /* Set up SLI-3 specific device driver resources */ |
13980 | error = lpfc_sli_driver_resource_setup(phba); |
13981 | if (error) { |
13982 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
13983 | "1404 Failed to set up driver resource.\n" ); |
13984 | goto out_unset_pci_mem_s3; |
13985 | } |
13986 | |
13987 | /* Initialize and populate the iocb list per host */ |
13988 | |
13989 | error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT); |
13990 | if (error) { |
13991 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
13992 | "1405 Failed to initialize iocb list.\n" ); |
13993 | goto out_unset_driver_resource_s3; |
13994 | } |
13995 | |
13996 | /* Set up common device driver resources */ |
13997 | error = lpfc_setup_driver_resource_phase2(phba); |
13998 | if (error) { |
13999 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14000 | "1406 Failed to set up driver resource.\n" ); |
14001 | goto out_free_iocb_list; |
14002 | } |
14003 | |
14004 | /* Get the default values for Model Name and Description */ |
14005 | lpfc_get_hba_model_desc(phba, mdp: phba->ModelName, descp: phba->ModelDesc); |
14006 | |
14007 | /* Create SCSI host to the physical port */ |
14008 | error = lpfc_create_shost(phba); |
14009 | if (error) { |
14010 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14011 | "1407 Failed to create scsi host.\n" ); |
14012 | goto out_unset_driver_resource; |
14013 | } |
14014 | |
14015 | /* Configure sysfs attributes */ |
14016 | vport = phba->pport; |
14017 | error = lpfc_alloc_sysfs_attr(vport); |
14018 | if (error) { |
14019 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14020 | "1476 Failed to allocate sysfs attr\n" ); |
14021 | goto out_destroy_shost; |
14022 | } |
14023 | |
14024 | shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */ |
14025 | /* Now, trying to enable interrupt and bring up the device */ |
14026 | cfg_mode = phba->cfg_use_msi; |
14027 | while (true) { |
14028 | /* Put device to a known state before enabling interrupt */ |
14029 | lpfc_stop_port(phba); |
14030 | /* Configure and enable interrupt */ |
14031 | intr_mode = lpfc_sli_enable_intr(phba, cfg_mode); |
14032 | if (intr_mode == LPFC_INTR_ERROR) { |
14033 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14034 | "0431 Failed to enable interrupt.\n" ); |
14035 | error = -ENODEV; |
14036 | goto out_free_sysfs_attr; |
14037 | } |
14038 | /* SLI-3 HBA setup */ |
14039 | if (lpfc_sli_hba_setup(phba)) { |
14040 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14041 | "1477 Failed to set up hba\n" ); |
14042 | error = -ENODEV; |
14043 | goto out_remove_device; |
14044 | } |
14045 | |
14046 | /* Wait 50ms for the interrupts of previous mailbox commands */ |
14047 | msleep(msecs: 50); |
14048 | /* Check active interrupts on message signaled interrupts */ |
14049 | if (intr_mode == 0 || |
14050 | phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) { |
14051 | /* Log the current active interrupt mode */ |
14052 | phba->intr_mode = intr_mode; |
14053 | lpfc_log_intr_mode(phba, intr_mode); |
14054 | break; |
14055 | } else { |
14056 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
14057 | "0447 Configure interrupt mode (%d) " |
14058 | "failed active interrupt test.\n" , |
14059 | intr_mode); |
14060 | /* Disable the current interrupt mode */ |
14061 | lpfc_sli_disable_intr(phba); |
14062 | /* Try next level of interrupt mode */ |
14063 | cfg_mode = --intr_mode; |
14064 | } |
14065 | } |
14066 | |
14067 | /* Perform post initialization setup */ |
14068 | lpfc_post_init_setup(phba); |
14069 | |
14070 | /* Check if there are static vports to be created. */ |
14071 | lpfc_create_static_vport(phba); |
14072 | |
14073 | return 0; |
14074 | |
14075 | out_remove_device: |
14076 | lpfc_unset_hba(phba); |
14077 | out_free_sysfs_attr: |
14078 | lpfc_free_sysfs_attr(vport); |
14079 | out_destroy_shost: |
14080 | lpfc_destroy_shost(phba); |
14081 | out_unset_driver_resource: |
14082 | lpfc_unset_driver_resource_phase2(phba); |
14083 | out_free_iocb_list: |
14084 | lpfc_free_iocb_list(phba); |
14085 | out_unset_driver_resource_s3: |
14086 | lpfc_sli_driver_resource_unset(phba); |
14087 | out_unset_pci_mem_s3: |
14088 | lpfc_sli_pci_mem_unset(phba); |
14089 | out_disable_pci_dev: |
14090 | lpfc_disable_pci_dev(phba); |
14091 | if (shost) |
14092 | scsi_host_put(t: shost); |
14093 | out_free_phba: |
14094 | lpfc_hba_free(phba); |
14095 | return error; |
14096 | } |
14097 | |
14098 | /** |
14099 | * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem. |
14100 | * @pdev: pointer to PCI device |
14101 | * |
14102 | * This routine is to be called to disattach a device with SLI-3 interface |
14103 | * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is |
14104 | * removed from PCI bus, it performs all the necessary cleanup for the HBA |
14105 | * device to be removed from the PCI subsystem properly. |
14106 | **/ |
14107 | static void |
14108 | lpfc_pci_remove_one_s3(struct pci_dev *pdev) |
14109 | { |
14110 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
14111 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
14112 | struct lpfc_vport **vports; |
14113 | struct lpfc_hba *phba = vport->phba; |
14114 | int i; |
14115 | |
14116 | spin_lock_irq(lock: &phba->hbalock); |
14117 | vport->load_flag |= FC_UNLOADING; |
14118 | spin_unlock_irq(lock: &phba->hbalock); |
14119 | |
14120 | lpfc_free_sysfs_attr(vport); |
14121 | |
14122 | /* Release all the vports against this physical port */ |
14123 | vports = lpfc_create_vport_work_array(phba); |
14124 | if (vports != NULL) |
14125 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
14126 | if (vports[i]->port_type == LPFC_PHYSICAL_PORT) |
14127 | continue; |
14128 | fc_vport_terminate(vport: vports[i]->fc_vport); |
14129 | } |
14130 | lpfc_destroy_vport_work_array(phba, vports); |
14131 | |
14132 | /* Remove FC host with the physical port */ |
14133 | fc_remove_host(shost); |
14134 | scsi_remove_host(shost); |
14135 | |
14136 | /* Clean up all nodes, mailboxes and IOs. */ |
14137 | lpfc_cleanup(vport); |
14138 | |
14139 | /* |
14140 | * Bring down the SLI Layer. This step disable all interrupts, |
14141 | * clears the rings, discards all mailbox commands, and resets |
14142 | * the HBA. |
14143 | */ |
14144 | |
14145 | /* HBA interrupt will be disabled after this call */ |
14146 | lpfc_sli_hba_down(phba); |
14147 | /* Stop kthread signal shall trigger work_done one more time */ |
14148 | kthread_stop(k: phba->worker_thread); |
14149 | /* Final cleanup of txcmplq and reset the HBA */ |
14150 | lpfc_sli_brdrestart(phba); |
14151 | |
14152 | kfree(objp: phba->vpi_bmask); |
14153 | kfree(objp: phba->vpi_ids); |
14154 | |
14155 | lpfc_stop_hba_timers(phba); |
14156 | spin_lock_irq(lock: &phba->port_list_lock); |
14157 | list_del_init(entry: &vport->listentry); |
14158 | spin_unlock_irq(lock: &phba->port_list_lock); |
14159 | |
14160 | lpfc_debugfs_terminate(vport); |
14161 | |
14162 | /* Disable SR-IOV if enabled */ |
14163 | if (phba->cfg_sriov_nr_virtfn) |
14164 | pci_disable_sriov(dev: pdev); |
14165 | |
14166 | /* Disable interrupt */ |
14167 | lpfc_sli_disable_intr(phba); |
14168 | |
14169 | scsi_host_put(t: shost); |
14170 | |
14171 | /* |
14172 | * Call scsi_free before mem_free since scsi bufs are released to their |
14173 | * corresponding pools here. |
14174 | */ |
14175 | lpfc_scsi_free(phba); |
14176 | lpfc_free_iocb_list(phba); |
14177 | |
14178 | lpfc_mem_free_all(phba); |
14179 | |
14180 | dma_free_coherent(dev: &pdev->dev, size: lpfc_sli_hbq_size(), |
14181 | cpu_addr: phba->hbqslimp.virt, dma_handle: phba->hbqslimp.phys); |
14182 | |
14183 | /* Free resources associated with SLI2 interface */ |
14184 | dma_free_coherent(dev: &pdev->dev, SLI2_SLIM_SIZE, |
14185 | cpu_addr: phba->slim2p.virt, dma_handle: phba->slim2p.phys); |
14186 | |
14187 | /* unmap adapter SLIM and Control Registers */ |
14188 | iounmap(addr: phba->ctrl_regs_memmap_p); |
14189 | iounmap(addr: phba->slim_memmap_p); |
14190 | |
14191 | lpfc_hba_free(phba); |
14192 | |
14193 | pci_release_mem_regions(pdev); |
14194 | pci_disable_device(dev: pdev); |
14195 | } |
14196 | |
14197 | /** |
14198 | * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt |
14199 | * @dev_d: pointer to device |
14200 | * |
14201 | * This routine is to be called from the kernel's PCI subsystem to support |
14202 | * system Power Management (PM) to device with SLI-3 interface spec. When |
14203 | * PM invokes this method, it quiesces the device by stopping the driver's |
14204 | * worker thread for the device, turning off device's interrupt and DMA, |
14205 | * and bring the device offline. Note that as the driver implements the |
14206 | * minimum PM requirements to a power-aware driver's PM support for the |
14207 | * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE) |
14208 | * to the suspend() method call will be treated as SUSPEND and the driver will |
14209 | * fully reinitialize its device during resume() method call, the driver will |
14210 | * set device to PCI_D3hot state in PCI config space instead of setting it |
14211 | * according to the @msg provided by the PM. |
14212 | * |
14213 | * Return code |
14214 | * 0 - driver suspended the device |
14215 | * Error otherwise |
14216 | **/ |
14217 | static int __maybe_unused |
14218 | lpfc_pci_suspend_one_s3(struct device *dev_d) |
14219 | { |
14220 | struct Scsi_Host *shost = dev_get_drvdata(dev: dev_d); |
14221 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
14222 | |
14223 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
14224 | "0473 PCI device Power Management suspend.\n" ); |
14225 | |
14226 | /* Bring down the device */ |
14227 | lpfc_offline_prep(phba, LPFC_MBX_WAIT); |
14228 | lpfc_offline(phba); |
14229 | kthread_stop(k: phba->worker_thread); |
14230 | |
14231 | /* Disable interrupt from device */ |
14232 | lpfc_sli_disable_intr(phba); |
14233 | |
14234 | return 0; |
14235 | } |
14236 | |
14237 | /** |
14238 | * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt |
14239 | * @dev_d: pointer to device |
14240 | * |
14241 | * This routine is to be called from the kernel's PCI subsystem to support |
14242 | * system Power Management (PM) to device with SLI-3 interface spec. When PM |
14243 | * invokes this method, it restores the device's PCI config space state and |
14244 | * fully reinitializes the device and brings it online. Note that as the |
14245 | * driver implements the minimum PM requirements to a power-aware driver's |
14246 | * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, |
14247 | * FREEZE) to the suspend() method call will be treated as SUSPEND and the |
14248 | * driver will fully reinitialize its device during resume() method call, |
14249 | * the device will be set to PCI_D0 directly in PCI config space before |
14250 | * restoring the state. |
14251 | * |
14252 | * Return code |
14253 | * 0 - driver suspended the device |
14254 | * Error otherwise |
14255 | **/ |
14256 | static int __maybe_unused |
14257 | lpfc_pci_resume_one_s3(struct device *dev_d) |
14258 | { |
14259 | struct Scsi_Host *shost = dev_get_drvdata(dev: dev_d); |
14260 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
14261 | uint32_t intr_mode; |
14262 | int error; |
14263 | |
14264 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
14265 | "0452 PCI device Power Management resume.\n" ); |
14266 | |
14267 | /* Startup the kernel thread for this host adapter. */ |
14268 | phba->worker_thread = kthread_run(lpfc_do_work, phba, |
14269 | "lpfc_worker_%d" , phba->brd_no); |
14270 | if (IS_ERR(ptr: phba->worker_thread)) { |
14271 | error = PTR_ERR(ptr: phba->worker_thread); |
14272 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14273 | "0434 PM resume failed to start worker " |
14274 | "thread: error=x%x.\n" , error); |
14275 | return error; |
14276 | } |
14277 | |
14278 | /* Init cpu_map array */ |
14279 | lpfc_cpu_map_array_init(phba); |
14280 | /* Init hba_eq_hdl array */ |
14281 | lpfc_hba_eq_hdl_array_init(phba); |
14282 | /* Configure and enable interrupt */ |
14283 | intr_mode = lpfc_sli_enable_intr(phba, cfg_mode: phba->intr_mode); |
14284 | if (intr_mode == LPFC_INTR_ERROR) { |
14285 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14286 | "0430 PM resume Failed to enable interrupt\n" ); |
14287 | return -EIO; |
14288 | } else |
14289 | phba->intr_mode = intr_mode; |
14290 | |
14291 | /* Restart HBA and bring it online */ |
14292 | lpfc_sli_brdrestart(phba); |
14293 | lpfc_online(phba); |
14294 | |
14295 | /* Log the current active interrupt mode */ |
14296 | lpfc_log_intr_mode(phba, intr_mode: phba->intr_mode); |
14297 | |
14298 | return 0; |
14299 | } |
14300 | |
14301 | /** |
14302 | * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover |
14303 | * @phba: pointer to lpfc hba data structure. |
14304 | * |
14305 | * This routine is called to prepare the SLI3 device for PCI slot recover. It |
14306 | * aborts all the outstanding SCSI I/Os to the pci device. |
14307 | **/ |
14308 | static void |
14309 | lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba) |
14310 | { |
14311 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14312 | "2723 PCI channel I/O abort preparing for recovery\n" ); |
14313 | |
14314 | /* |
14315 | * There may be errored I/Os through HBA, abort all I/Os on txcmplq |
14316 | * and let the SCSI mid-layer to retry them to recover. |
14317 | */ |
14318 | lpfc_sli_abort_fcp_rings(phba); |
14319 | } |
14320 | |
14321 | /** |
14322 | * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset |
14323 | * @phba: pointer to lpfc hba data structure. |
14324 | * |
14325 | * This routine is called to prepare the SLI3 device for PCI slot reset. It |
14326 | * disables the device interrupt and pci device, and aborts the internal FCP |
14327 | * pending I/Os. |
14328 | **/ |
14329 | static void |
14330 | lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba) |
14331 | { |
14332 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14333 | "2710 PCI channel disable preparing for reset\n" ); |
14334 | |
14335 | /* Block any management I/Os to the device */ |
14336 | lpfc_block_mgmt_io(phba, LPFC_MBX_WAIT); |
14337 | |
14338 | /* Block all SCSI devices' I/Os on the host */ |
14339 | lpfc_scsi_dev_block(phba); |
14340 | |
14341 | /* Flush all driver's outstanding SCSI I/Os as we are to reset */ |
14342 | lpfc_sli_flush_io_rings(phba); |
14343 | |
14344 | /* stop all timers */ |
14345 | lpfc_stop_hba_timers(phba); |
14346 | |
14347 | /* Disable interrupt and pci device */ |
14348 | lpfc_sli_disable_intr(phba); |
14349 | pci_disable_device(dev: phba->pcidev); |
14350 | } |
14351 | |
14352 | /** |
14353 | * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable |
14354 | * @phba: pointer to lpfc hba data structure. |
14355 | * |
14356 | * This routine is called to prepare the SLI3 device for PCI slot permanently |
14357 | * disabling. It blocks the SCSI transport layer traffic and flushes the FCP |
14358 | * pending I/Os. |
14359 | **/ |
14360 | static void |
14361 | lpfc_sli_prep_dev_for_perm_failure(struct lpfc_hba *phba) |
14362 | { |
14363 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14364 | "2711 PCI channel permanent disable for failure\n" ); |
14365 | /* Block all SCSI devices' I/Os on the host */ |
14366 | lpfc_scsi_dev_block(phba); |
14367 | lpfc_sli4_prep_dev_for_reset(phba); |
14368 | |
14369 | /* stop all timers */ |
14370 | lpfc_stop_hba_timers(phba); |
14371 | |
14372 | /* Clean up all driver's outstanding SCSI I/Os */ |
14373 | lpfc_sli_flush_io_rings(phba); |
14374 | } |
14375 | |
14376 | /** |
14377 | * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error |
14378 | * @pdev: pointer to PCI device. |
14379 | * @state: the current PCI connection state. |
14380 | * |
14381 | * This routine is called from the PCI subsystem for I/O error handling to |
14382 | * device with SLI-3 interface spec. This function is called by the PCI |
14383 | * subsystem after a PCI bus error affecting this device has been detected. |
14384 | * When this function is invoked, it will need to stop all the I/Os and |
14385 | * interrupt(s) to the device. Once that is done, it will return |
14386 | * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery |
14387 | * as desired. |
14388 | * |
14389 | * Return codes |
14390 | * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link |
14391 | * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery |
14392 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
14393 | **/ |
14394 | static pci_ers_result_t |
14395 | lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state) |
14396 | { |
14397 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
14398 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
14399 | |
14400 | switch (state) { |
14401 | case pci_channel_io_normal: |
14402 | /* Non-fatal error, prepare for recovery */ |
14403 | lpfc_sli_prep_dev_for_recover(phba); |
14404 | return PCI_ERS_RESULT_CAN_RECOVER; |
14405 | case pci_channel_io_frozen: |
14406 | /* Fatal error, prepare for slot reset */ |
14407 | lpfc_sli_prep_dev_for_reset(phba); |
14408 | return PCI_ERS_RESULT_NEED_RESET; |
14409 | case pci_channel_io_perm_failure: |
14410 | /* Permanent failure, prepare for device down */ |
14411 | lpfc_sli_prep_dev_for_perm_failure(phba); |
14412 | return PCI_ERS_RESULT_DISCONNECT; |
14413 | default: |
14414 | /* Unknown state, prepare and request slot reset */ |
14415 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14416 | "0472 Unknown PCI error state: x%x\n" , state); |
14417 | lpfc_sli_prep_dev_for_reset(phba); |
14418 | return PCI_ERS_RESULT_NEED_RESET; |
14419 | } |
14420 | } |
14421 | |
14422 | /** |
14423 | * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch. |
14424 | * @pdev: pointer to PCI device. |
14425 | * |
14426 | * This routine is called from the PCI subsystem for error handling to |
14427 | * device with SLI-3 interface spec. This is called after PCI bus has been |
14428 | * reset to restart the PCI card from scratch, as if from a cold-boot. |
14429 | * During the PCI subsystem error recovery, after driver returns |
14430 | * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error |
14431 | * recovery and then call this routine before calling the .resume method |
14432 | * to recover the device. This function will initialize the HBA device, |
14433 | * enable the interrupt, but it will just put the HBA to offline state |
14434 | * without passing any I/O traffic. |
14435 | * |
14436 | * Return codes |
14437 | * PCI_ERS_RESULT_RECOVERED - the device has been recovered |
14438 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
14439 | */ |
14440 | static pci_ers_result_t |
14441 | lpfc_io_slot_reset_s3(struct pci_dev *pdev) |
14442 | { |
14443 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
14444 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
14445 | struct lpfc_sli *psli = &phba->sli; |
14446 | uint32_t intr_mode; |
14447 | |
14448 | dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n" ); |
14449 | if (pci_enable_device_mem(dev: pdev)) { |
14450 | printk(KERN_ERR "lpfc: Cannot re-enable " |
14451 | "PCI device after reset.\n" ); |
14452 | return PCI_ERS_RESULT_DISCONNECT; |
14453 | } |
14454 | |
14455 | pci_restore_state(dev: pdev); |
14456 | |
14457 | /* |
14458 | * As the new kernel behavior of pci_restore_state() API call clears |
14459 | * device saved_state flag, need to save the restored state again. |
14460 | */ |
14461 | pci_save_state(dev: pdev); |
14462 | |
14463 | if (pdev->is_busmaster) |
14464 | pci_set_master(dev: pdev); |
14465 | |
14466 | spin_lock_irq(lock: &phba->hbalock); |
14467 | psli->sli_flag &= ~LPFC_SLI_ACTIVE; |
14468 | spin_unlock_irq(lock: &phba->hbalock); |
14469 | |
14470 | /* Configure and enable interrupt */ |
14471 | intr_mode = lpfc_sli_enable_intr(phba, cfg_mode: phba->intr_mode); |
14472 | if (intr_mode == LPFC_INTR_ERROR) { |
14473 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14474 | "0427 Cannot re-enable interrupt after " |
14475 | "slot reset.\n" ); |
14476 | return PCI_ERS_RESULT_DISCONNECT; |
14477 | } else |
14478 | phba->intr_mode = intr_mode; |
14479 | |
14480 | /* Take device offline, it will perform cleanup */ |
14481 | lpfc_offline_prep(phba, LPFC_MBX_WAIT); |
14482 | lpfc_offline(phba); |
14483 | lpfc_sli_brdrestart(phba); |
14484 | |
14485 | /* Log the current active interrupt mode */ |
14486 | lpfc_log_intr_mode(phba, intr_mode: phba->intr_mode); |
14487 | |
14488 | return PCI_ERS_RESULT_RECOVERED; |
14489 | } |
14490 | |
14491 | /** |
14492 | * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device. |
14493 | * @pdev: pointer to PCI device |
14494 | * |
14495 | * This routine is called from the PCI subsystem for error handling to device |
14496 | * with SLI-3 interface spec. It is called when kernel error recovery tells |
14497 | * the lpfc driver that it is ok to resume normal PCI operation after PCI bus |
14498 | * error recovery. After this call, traffic can start to flow from this device |
14499 | * again. |
14500 | */ |
14501 | static void |
14502 | lpfc_io_resume_s3(struct pci_dev *pdev) |
14503 | { |
14504 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
14505 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
14506 | |
14507 | /* Bring device online, it will be no-op for non-fatal error resume */ |
14508 | lpfc_online(phba); |
14509 | } |
14510 | |
14511 | /** |
14512 | * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve |
14513 | * @phba: pointer to lpfc hba data structure. |
14514 | * |
14515 | * returns the number of ELS/CT IOCBs to reserve |
14516 | **/ |
14517 | int |
14518 | lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba) |
14519 | { |
14520 | int max_xri = phba->sli4_hba.max_cfg_param.max_xri; |
14521 | |
14522 | if (phba->sli_rev == LPFC_SLI_REV4) { |
14523 | if (max_xri <= 100) |
14524 | return 10; |
14525 | else if (max_xri <= 256) |
14526 | return 25; |
14527 | else if (max_xri <= 512) |
14528 | return 50; |
14529 | else if (max_xri <= 1024) |
14530 | return 100; |
14531 | else if (max_xri <= 1536) |
14532 | return 150; |
14533 | else if (max_xri <= 2048) |
14534 | return 200; |
14535 | else |
14536 | return 250; |
14537 | } else |
14538 | return 0; |
14539 | } |
14540 | |
14541 | /** |
14542 | * lpfc_sli4_get_iocb_cnt - Calculate the # of total IOCBs to reserve |
14543 | * @phba: pointer to lpfc hba data structure. |
14544 | * |
14545 | * returns the number of ELS/CT + NVMET IOCBs to reserve |
14546 | **/ |
14547 | int |
14548 | lpfc_sli4_get_iocb_cnt(struct lpfc_hba *phba) |
14549 | { |
14550 | int max_xri = lpfc_sli4_get_els_iocb_cnt(phba); |
14551 | |
14552 | if (phba->nvmet_support) |
14553 | max_xri += LPFC_NVMET_BUF_POST; |
14554 | return max_xri; |
14555 | } |
14556 | |
14557 | |
14558 | static int |
14559 | lpfc_log_write_firmware_error(struct lpfc_hba *phba, uint32_t offset, |
14560 | uint32_t magic_number, uint32_t ftype, uint32_t fid, uint32_t fsize, |
14561 | const struct firmware *fw) |
14562 | { |
14563 | int rc; |
14564 | u8 sli_family; |
14565 | |
14566 | sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf); |
14567 | /* Three cases: (1) FW was not supported on the detected adapter. |
14568 | * (2) FW update has been locked out administratively. |
14569 | * (3) Some other error during FW update. |
14570 | * In each case, an unmaskable message is written to the console |
14571 | * for admin diagnosis. |
14572 | */ |
14573 | if (offset == ADD_STATUS_FW_NOT_SUPPORTED || |
14574 | (sli_family == LPFC_SLI_INTF_FAMILY_G6 && |
14575 | magic_number != MAGIC_NUMBER_G6) || |
14576 | (sli_family == LPFC_SLI_INTF_FAMILY_G7 && |
14577 | magic_number != MAGIC_NUMBER_G7) || |
14578 | (sli_family == LPFC_SLI_INTF_FAMILY_G7P && |
14579 | magic_number != MAGIC_NUMBER_G7P)) { |
14580 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14581 | "3030 This firmware version is not supported on" |
14582 | " this HBA model. Device:%x Magic:%x Type:%x " |
14583 | "ID:%x Size %d %zd\n" , |
14584 | phba->pcidev->device, magic_number, ftype, fid, |
14585 | fsize, fw->size); |
14586 | rc = -EINVAL; |
14587 | } else if (offset == ADD_STATUS_FW_DOWNLOAD_HW_DISABLED) { |
14588 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14589 | "3021 Firmware downloads have been prohibited " |
14590 | "by a system configuration setting on " |
14591 | "Device:%x Magic:%x Type:%x ID:%x Size %d " |
14592 | "%zd\n" , |
14593 | phba->pcidev->device, magic_number, ftype, fid, |
14594 | fsize, fw->size); |
14595 | rc = -EACCES; |
14596 | } else { |
14597 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14598 | "3022 FW Download failed. Add Status x%x " |
14599 | "Device:%x Magic:%x Type:%x ID:%x Size %d " |
14600 | "%zd\n" , |
14601 | offset, phba->pcidev->device, magic_number, |
14602 | ftype, fid, fsize, fw->size); |
14603 | rc = -EIO; |
14604 | } |
14605 | return rc; |
14606 | } |
14607 | |
14608 | /** |
14609 | * lpfc_write_firmware - attempt to write a firmware image to the port |
14610 | * @fw: pointer to firmware image returned from request_firmware. |
14611 | * @context: pointer to firmware image returned from request_firmware. |
14612 | * |
14613 | **/ |
14614 | static void |
14615 | lpfc_write_firmware(const struct firmware *fw, void *context) |
14616 | { |
14617 | struct lpfc_hba *phba = (struct lpfc_hba *)context; |
14618 | char fwrev[FW_REV_STR_SIZE]; |
14619 | struct lpfc_grp_hdr *image; |
14620 | struct list_head dma_buffer_list; |
14621 | int i, rc = 0; |
14622 | struct lpfc_dmabuf *dmabuf, *next; |
14623 | uint32_t offset = 0, temp_offset = 0; |
14624 | uint32_t magic_number, ftype, fid, fsize; |
14625 | |
14626 | /* It can be null in no-wait mode, sanity check */ |
14627 | if (!fw) { |
14628 | rc = -ENXIO; |
14629 | goto out; |
14630 | } |
14631 | image = (struct lpfc_grp_hdr *)fw->data; |
14632 | |
14633 | magic_number = be32_to_cpu(image->magic_number); |
14634 | ftype = bf_get_be32(lpfc_grp_hdr_file_type, image); |
14635 | fid = bf_get_be32(lpfc_grp_hdr_id, image); |
14636 | fsize = be32_to_cpu(image->size); |
14637 | |
14638 | INIT_LIST_HEAD(list: &dma_buffer_list); |
14639 | lpfc_decode_firmware_rev(phba, fwrev, 1); |
14640 | if (strncmp(fwrev, image->revision, strnlen(p: image->revision, maxlen: 16))) { |
14641 | lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI, |
14642 | "3023 Updating Firmware, Current Version:%s " |
14643 | "New Version:%s\n" , |
14644 | fwrev, image->revision); |
14645 | for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) { |
14646 | dmabuf = kzalloc(size: sizeof(struct lpfc_dmabuf), |
14647 | GFP_KERNEL); |
14648 | if (!dmabuf) { |
14649 | rc = -ENOMEM; |
14650 | goto release_out; |
14651 | } |
14652 | dmabuf->virt = dma_alloc_coherent(dev: &phba->pcidev->dev, |
14653 | SLI4_PAGE_SIZE, |
14654 | dma_handle: &dmabuf->phys, |
14655 | GFP_KERNEL); |
14656 | if (!dmabuf->virt) { |
14657 | kfree(objp: dmabuf); |
14658 | rc = -ENOMEM; |
14659 | goto release_out; |
14660 | } |
14661 | list_add_tail(new: &dmabuf->list, head: &dma_buffer_list); |
14662 | } |
14663 | while (offset < fw->size) { |
14664 | temp_offset = offset; |
14665 | list_for_each_entry(dmabuf, &dma_buffer_list, list) { |
14666 | if (temp_offset + SLI4_PAGE_SIZE > fw->size) { |
14667 | memcpy(dmabuf->virt, |
14668 | fw->data + temp_offset, |
14669 | fw->size - temp_offset); |
14670 | temp_offset = fw->size; |
14671 | break; |
14672 | } |
14673 | memcpy(dmabuf->virt, fw->data + temp_offset, |
14674 | SLI4_PAGE_SIZE); |
14675 | temp_offset += SLI4_PAGE_SIZE; |
14676 | } |
14677 | rc = lpfc_wr_object(phba, &dma_buffer_list, |
14678 | (fw->size - offset), &offset); |
14679 | if (rc) { |
14680 | rc = lpfc_log_write_firmware_error(phba, offset, |
14681 | magic_number, |
14682 | ftype, |
14683 | fid, |
14684 | fsize, |
14685 | fw); |
14686 | goto release_out; |
14687 | } |
14688 | } |
14689 | rc = offset; |
14690 | } else |
14691 | lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI, |
14692 | "3029 Skipped Firmware update, Current " |
14693 | "Version:%s New Version:%s\n" , |
14694 | fwrev, image->revision); |
14695 | |
14696 | release_out: |
14697 | list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) { |
14698 | list_del(entry: &dmabuf->list); |
14699 | dma_free_coherent(dev: &phba->pcidev->dev, SLI4_PAGE_SIZE, |
14700 | cpu_addr: dmabuf->virt, dma_handle: dmabuf->phys); |
14701 | kfree(objp: dmabuf); |
14702 | } |
14703 | release_firmware(fw); |
14704 | out: |
14705 | if (rc < 0) |
14706 | lpfc_log_msg(phba, KERN_ERR, LOG_INIT | LOG_SLI, |
14707 | "3062 Firmware update error, status %d.\n" , rc); |
14708 | else |
14709 | lpfc_log_msg(phba, KERN_NOTICE, LOG_INIT | LOG_SLI, |
14710 | "3024 Firmware update success: size %d.\n" , rc); |
14711 | } |
14712 | |
14713 | /** |
14714 | * lpfc_sli4_request_firmware_update - Request linux generic firmware upgrade |
14715 | * @phba: pointer to lpfc hba data structure. |
14716 | * @fw_upgrade: which firmware to update. |
14717 | * |
14718 | * This routine is called to perform Linux generic firmware upgrade on device |
14719 | * that supports such feature. |
14720 | **/ |
14721 | int |
14722 | lpfc_sli4_request_firmware_update(struct lpfc_hba *phba, uint8_t fw_upgrade) |
14723 | { |
14724 | uint8_t file_name[ELX_MODEL_NAME_SIZE]; |
14725 | int ret; |
14726 | const struct firmware *fw; |
14727 | |
14728 | /* Only supported on SLI4 interface type 2 for now */ |
14729 | if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) < |
14730 | LPFC_SLI_INTF_IF_TYPE_2) |
14731 | return -EPERM; |
14732 | |
14733 | snprintf(buf: file_name, ELX_MODEL_NAME_SIZE, fmt: "%s.grp" , phba->ModelName); |
14734 | |
14735 | if (fw_upgrade == INT_FW_UPGRADE) { |
14736 | ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT, |
14737 | name: file_name, device: &phba->pcidev->dev, |
14738 | GFP_KERNEL, context: (void *)phba, |
14739 | cont: lpfc_write_firmware); |
14740 | } else if (fw_upgrade == RUN_FW_UPGRADE) { |
14741 | ret = request_firmware(fw: &fw, name: file_name, device: &phba->pcidev->dev); |
14742 | if (!ret) |
14743 | lpfc_write_firmware(fw, context: (void *)phba); |
14744 | } else { |
14745 | ret = -EINVAL; |
14746 | } |
14747 | |
14748 | return ret; |
14749 | } |
14750 | |
14751 | /** |
14752 | * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys |
14753 | * @pdev: pointer to PCI device |
14754 | * @pid: pointer to PCI device identifier |
14755 | * |
14756 | * This routine is called from the kernel's PCI subsystem to device with |
14757 | * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is |
14758 | * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific |
14759 | * information of the device and driver to see if the driver state that it |
14760 | * can support this kind of device. If the match is successful, the driver |
14761 | * core invokes this routine. If this routine determines it can claim the HBA, |
14762 | * it does all the initialization that it needs to do to handle the HBA |
14763 | * properly. |
14764 | * |
14765 | * Return code |
14766 | * 0 - driver can claim the device |
14767 | * negative value - driver can not claim the device |
14768 | **/ |
14769 | static int |
14770 | lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) |
14771 | { |
14772 | struct lpfc_hba *phba; |
14773 | struct lpfc_vport *vport = NULL; |
14774 | struct Scsi_Host *shost = NULL; |
14775 | int error; |
14776 | uint32_t cfg_mode, intr_mode; |
14777 | |
14778 | /* Allocate memory for HBA structure */ |
14779 | phba = lpfc_hba_alloc(pdev); |
14780 | if (!phba) |
14781 | return -ENOMEM; |
14782 | |
14783 | INIT_LIST_HEAD(list: &phba->poll_list); |
14784 | |
14785 | /* Perform generic PCI device enabling operation */ |
14786 | error = lpfc_enable_pci_dev(phba); |
14787 | if (error) |
14788 | goto out_free_phba; |
14789 | |
14790 | /* Set up SLI API function jump table for PCI-device group-1 HBAs */ |
14791 | error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC); |
14792 | if (error) |
14793 | goto out_disable_pci_dev; |
14794 | |
14795 | /* Set up SLI-4 specific device PCI memory space */ |
14796 | error = lpfc_sli4_pci_mem_setup(phba); |
14797 | if (error) { |
14798 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14799 | "1410 Failed to set up pci memory space.\n" ); |
14800 | goto out_disable_pci_dev; |
14801 | } |
14802 | |
14803 | /* Set up SLI-4 Specific device driver resources */ |
14804 | error = lpfc_sli4_driver_resource_setup(phba); |
14805 | if (error) { |
14806 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14807 | "1412 Failed to set up driver resource.\n" ); |
14808 | goto out_unset_pci_mem_s4; |
14809 | } |
14810 | |
14811 | INIT_LIST_HEAD(list: &phba->active_rrq_list); |
14812 | INIT_LIST_HEAD(list: &phba->fcf.fcf_pri_list); |
14813 | |
14814 | /* Set up common device driver resources */ |
14815 | error = lpfc_setup_driver_resource_phase2(phba); |
14816 | if (error) { |
14817 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14818 | "1414 Failed to set up driver resource.\n" ); |
14819 | goto out_unset_driver_resource_s4; |
14820 | } |
14821 | |
14822 | /* Get the default values for Model Name and Description */ |
14823 | lpfc_get_hba_model_desc(phba, mdp: phba->ModelName, descp: phba->ModelDesc); |
14824 | |
14825 | /* Now, trying to enable interrupt and bring up the device */ |
14826 | cfg_mode = phba->cfg_use_msi; |
14827 | |
14828 | /* Put device to a known state before enabling interrupt */ |
14829 | phba->pport = NULL; |
14830 | lpfc_stop_port(phba); |
14831 | |
14832 | /* Init cpu_map array */ |
14833 | lpfc_cpu_map_array_init(phba); |
14834 | |
14835 | /* Init hba_eq_hdl array */ |
14836 | lpfc_hba_eq_hdl_array_init(phba); |
14837 | |
14838 | /* Configure and enable interrupt */ |
14839 | intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode); |
14840 | if (intr_mode == LPFC_INTR_ERROR) { |
14841 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14842 | "0426 Failed to enable interrupt.\n" ); |
14843 | error = -ENODEV; |
14844 | goto out_unset_driver_resource; |
14845 | } |
14846 | /* Default to single EQ for non-MSI-X */ |
14847 | if (phba->intr_type != MSIX) { |
14848 | phba->cfg_irq_chann = 1; |
14849 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
14850 | if (phba->nvmet_support) |
14851 | phba->cfg_nvmet_mrq = 1; |
14852 | } |
14853 | } |
14854 | lpfc_cpu_affinity_check(phba, vectors: phba->cfg_irq_chann); |
14855 | |
14856 | /* Create SCSI host to the physical port */ |
14857 | error = lpfc_create_shost(phba); |
14858 | if (error) { |
14859 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14860 | "1415 Failed to create scsi host.\n" ); |
14861 | goto out_disable_intr; |
14862 | } |
14863 | vport = phba->pport; |
14864 | shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */ |
14865 | |
14866 | /* Configure sysfs attributes */ |
14867 | error = lpfc_alloc_sysfs_attr(vport); |
14868 | if (error) { |
14869 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
14870 | "1416 Failed to allocate sysfs attr\n" ); |
14871 | goto out_destroy_shost; |
14872 | } |
14873 | |
14874 | /* Set up SLI-4 HBA */ |
14875 | if (lpfc_sli4_hba_setup(phba)) { |
14876 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14877 | "1421 Failed to set up hba\n" ); |
14878 | error = -ENODEV; |
14879 | goto out_free_sysfs_attr; |
14880 | } |
14881 | |
14882 | /* Log the current active interrupt mode */ |
14883 | phba->intr_mode = intr_mode; |
14884 | lpfc_log_intr_mode(phba, intr_mode); |
14885 | |
14886 | /* Perform post initialization setup */ |
14887 | lpfc_post_init_setup(phba); |
14888 | |
14889 | /* NVME support in FW earlier in the driver load corrects the |
14890 | * FC4 type making a check for nvme_support unnecessary. |
14891 | */ |
14892 | if (phba->nvmet_support == 0) { |
14893 | if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME) { |
14894 | /* Create NVME binding with nvme_fc_transport. This |
14895 | * ensures the vport is initialized. If the localport |
14896 | * create fails, it should not unload the driver to |
14897 | * support field issues. |
14898 | */ |
14899 | error = lpfc_nvme_create_localport(vport); |
14900 | if (error) { |
14901 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
14902 | "6004 NVME registration " |
14903 | "failed, error x%x\n" , |
14904 | error); |
14905 | } |
14906 | } |
14907 | } |
14908 | |
14909 | /* check for firmware upgrade or downgrade */ |
14910 | if (phba->cfg_request_firmware_upgrade) |
14911 | lpfc_sli4_request_firmware_update(phba, INT_FW_UPGRADE); |
14912 | |
14913 | /* Check if there are static vports to be created. */ |
14914 | lpfc_create_static_vport(phba); |
14915 | |
14916 | timer_setup(&phba->cpuhp_poll_timer, lpfc_sli4_poll_hbtimer, 0); |
14917 | cpuhp_state_add_instance_nocalls(state: lpfc_cpuhp_state, node: &phba->cpuhp); |
14918 | |
14919 | return 0; |
14920 | |
14921 | out_free_sysfs_attr: |
14922 | lpfc_free_sysfs_attr(vport); |
14923 | out_destroy_shost: |
14924 | lpfc_destroy_shost(phba); |
14925 | out_disable_intr: |
14926 | lpfc_sli4_disable_intr(phba); |
14927 | out_unset_driver_resource: |
14928 | lpfc_unset_driver_resource_phase2(phba); |
14929 | out_unset_driver_resource_s4: |
14930 | lpfc_sli4_driver_resource_unset(phba); |
14931 | out_unset_pci_mem_s4: |
14932 | lpfc_sli4_pci_mem_unset(phba); |
14933 | out_disable_pci_dev: |
14934 | lpfc_disable_pci_dev(phba); |
14935 | if (shost) |
14936 | scsi_host_put(t: shost); |
14937 | out_free_phba: |
14938 | lpfc_hba_free(phba); |
14939 | return error; |
14940 | } |
14941 | |
14942 | /** |
14943 | * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem |
14944 | * @pdev: pointer to PCI device |
14945 | * |
14946 | * This routine is called from the kernel's PCI subsystem to device with |
14947 | * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is |
14948 | * removed from PCI bus, it performs all the necessary cleanup for the HBA |
14949 | * device to be removed from the PCI subsystem properly. |
14950 | **/ |
14951 | static void |
14952 | lpfc_pci_remove_one_s4(struct pci_dev *pdev) |
14953 | { |
14954 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
14955 | struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; |
14956 | struct lpfc_vport **vports; |
14957 | struct lpfc_hba *phba = vport->phba; |
14958 | int i; |
14959 | |
14960 | /* Mark the device unloading flag */ |
14961 | spin_lock_irq(lock: &phba->hbalock); |
14962 | vport->load_flag |= FC_UNLOADING; |
14963 | spin_unlock_irq(lock: &phba->hbalock); |
14964 | if (phba->cgn_i) |
14965 | lpfc_unreg_congestion_buf(phba); |
14966 | |
14967 | lpfc_free_sysfs_attr(vport); |
14968 | |
14969 | /* Release all the vports against this physical port */ |
14970 | vports = lpfc_create_vport_work_array(phba); |
14971 | if (vports != NULL) |
14972 | for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { |
14973 | if (vports[i]->port_type == LPFC_PHYSICAL_PORT) |
14974 | continue; |
14975 | fc_vport_terminate(vport: vports[i]->fc_vport); |
14976 | } |
14977 | lpfc_destroy_vport_work_array(phba, vports); |
14978 | |
14979 | /* Remove FC host with the physical port */ |
14980 | fc_remove_host(shost); |
14981 | scsi_remove_host(shost); |
14982 | |
14983 | /* Perform ndlp cleanup on the physical port. The nvme and nvmet |
14984 | * localports are destroyed after to cleanup all transport memory. |
14985 | */ |
14986 | lpfc_cleanup(vport); |
14987 | lpfc_nvmet_destroy_targetport(phba); |
14988 | lpfc_nvme_destroy_localport(vport); |
14989 | |
14990 | /* De-allocate multi-XRI pools */ |
14991 | if (phba->cfg_xri_rebalancing) |
14992 | lpfc_destroy_multixri_pools(phba); |
14993 | |
14994 | /* |
14995 | * Bring down the SLI Layer. This step disables all interrupts, |
14996 | * clears the rings, discards all mailbox commands, and resets |
14997 | * the HBA FCoE function. |
14998 | */ |
14999 | lpfc_debugfs_terminate(vport); |
15000 | |
15001 | lpfc_stop_hba_timers(phba); |
15002 | spin_lock_irq(lock: &phba->port_list_lock); |
15003 | list_del_init(entry: &vport->listentry); |
15004 | spin_unlock_irq(lock: &phba->port_list_lock); |
15005 | |
15006 | /* Perform scsi free before driver resource_unset since scsi |
15007 | * buffers are released to their corresponding pools here. |
15008 | */ |
15009 | lpfc_io_free(phba); |
15010 | lpfc_free_iocb_list(phba); |
15011 | lpfc_sli4_hba_unset(phba); |
15012 | |
15013 | lpfc_unset_driver_resource_phase2(phba); |
15014 | lpfc_sli4_driver_resource_unset(phba); |
15015 | |
15016 | /* Unmap adapter Control and Doorbell registers */ |
15017 | lpfc_sli4_pci_mem_unset(phba); |
15018 | |
15019 | /* Release PCI resources and disable device's PCI function */ |
15020 | scsi_host_put(t: shost); |
15021 | lpfc_disable_pci_dev(phba); |
15022 | |
15023 | /* Finally, free the driver's device data structure */ |
15024 | lpfc_hba_free(phba); |
15025 | |
15026 | return; |
15027 | } |
15028 | |
15029 | /** |
15030 | * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt |
15031 | * @dev_d: pointer to device |
15032 | * |
15033 | * This routine is called from the kernel's PCI subsystem to support system |
15034 | * Power Management (PM) to device with SLI-4 interface spec. When PM invokes |
15035 | * this method, it quiesces the device by stopping the driver's worker |
15036 | * thread for the device, turning off device's interrupt and DMA, and bring |
15037 | * the device offline. Note that as the driver implements the minimum PM |
15038 | * requirements to a power-aware driver's PM support for suspend/resume -- all |
15039 | * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend() |
15040 | * method call will be treated as SUSPEND and the driver will fully |
15041 | * reinitialize its device during resume() method call, the driver will set |
15042 | * device to PCI_D3hot state in PCI config space instead of setting it |
15043 | * according to the @msg provided by the PM. |
15044 | * |
15045 | * Return code |
15046 | * 0 - driver suspended the device |
15047 | * Error otherwise |
15048 | **/ |
15049 | static int __maybe_unused |
15050 | lpfc_pci_suspend_one_s4(struct device *dev_d) |
15051 | { |
15052 | struct Scsi_Host *shost = dev_get_drvdata(dev: dev_d); |
15053 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15054 | |
15055 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
15056 | "2843 PCI device Power Management suspend.\n" ); |
15057 | |
15058 | /* Bring down the device */ |
15059 | lpfc_offline_prep(phba, LPFC_MBX_WAIT); |
15060 | lpfc_offline(phba); |
15061 | kthread_stop(k: phba->worker_thread); |
15062 | |
15063 | /* Disable interrupt from device */ |
15064 | lpfc_sli4_disable_intr(phba); |
15065 | lpfc_sli4_queue_destroy(phba); |
15066 | |
15067 | return 0; |
15068 | } |
15069 | |
15070 | /** |
15071 | * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt |
15072 | * @dev_d: pointer to device |
15073 | * |
15074 | * This routine is called from the kernel's PCI subsystem to support system |
15075 | * Power Management (PM) to device with SLI-4 interface spac. When PM invokes |
15076 | * this method, it restores the device's PCI config space state and fully |
15077 | * reinitializes the device and brings it online. Note that as the driver |
15078 | * implements the minimum PM requirements to a power-aware driver's PM for |
15079 | * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE) |
15080 | * to the suspend() method call will be treated as SUSPEND and the driver |
15081 | * will fully reinitialize its device during resume() method call, the device |
15082 | * will be set to PCI_D0 directly in PCI config space before restoring the |
15083 | * state. |
15084 | * |
15085 | * Return code |
15086 | * 0 - driver suspended the device |
15087 | * Error otherwise |
15088 | **/ |
15089 | static int __maybe_unused |
15090 | lpfc_pci_resume_one_s4(struct device *dev_d) |
15091 | { |
15092 | struct Scsi_Host *shost = dev_get_drvdata(dev: dev_d); |
15093 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15094 | uint32_t intr_mode; |
15095 | int error; |
15096 | |
15097 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
15098 | "0292 PCI device Power Management resume.\n" ); |
15099 | |
15100 | /* Startup the kernel thread for this host adapter. */ |
15101 | phba->worker_thread = kthread_run(lpfc_do_work, phba, |
15102 | "lpfc_worker_%d" , phba->brd_no); |
15103 | if (IS_ERR(ptr: phba->worker_thread)) { |
15104 | error = PTR_ERR(ptr: phba->worker_thread); |
15105 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
15106 | "0293 PM resume failed to start worker " |
15107 | "thread: error=x%x.\n" , error); |
15108 | return error; |
15109 | } |
15110 | |
15111 | /* Configure and enable interrupt */ |
15112 | intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode: phba->intr_mode); |
15113 | if (intr_mode == LPFC_INTR_ERROR) { |
15114 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15115 | "0294 PM resume Failed to enable interrupt\n" ); |
15116 | return -EIO; |
15117 | } else |
15118 | phba->intr_mode = intr_mode; |
15119 | |
15120 | /* Restart HBA and bring it online */ |
15121 | lpfc_sli_brdrestart(phba); |
15122 | lpfc_online(phba); |
15123 | |
15124 | /* Log the current active interrupt mode */ |
15125 | lpfc_log_intr_mode(phba, intr_mode: phba->intr_mode); |
15126 | |
15127 | return 0; |
15128 | } |
15129 | |
15130 | /** |
15131 | * lpfc_sli4_prep_dev_for_recover - Prepare SLI4 device for pci slot recover |
15132 | * @phba: pointer to lpfc hba data structure. |
15133 | * |
15134 | * This routine is called to prepare the SLI4 device for PCI slot recover. It |
15135 | * aborts all the outstanding SCSI I/Os to the pci device. |
15136 | **/ |
15137 | static void |
15138 | lpfc_sli4_prep_dev_for_recover(struct lpfc_hba *phba) |
15139 | { |
15140 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15141 | "2828 PCI channel I/O abort preparing for recovery\n" ); |
15142 | /* |
15143 | * There may be errored I/Os through HBA, abort all I/Os on txcmplq |
15144 | * and let the SCSI mid-layer to retry them to recover. |
15145 | */ |
15146 | lpfc_sli_abort_fcp_rings(phba); |
15147 | } |
15148 | |
15149 | /** |
15150 | * lpfc_sli4_prep_dev_for_reset - Prepare SLI4 device for pci slot reset |
15151 | * @phba: pointer to lpfc hba data structure. |
15152 | * |
15153 | * This routine is called to prepare the SLI4 device for PCI slot reset. It |
15154 | * disables the device interrupt and pci device, and aborts the internal FCP |
15155 | * pending I/Os. |
15156 | **/ |
15157 | static void |
15158 | lpfc_sli4_prep_dev_for_reset(struct lpfc_hba *phba) |
15159 | { |
15160 | int offline = pci_channel_offline(pdev: phba->pcidev); |
15161 | |
15162 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
15163 | "2826 PCI channel disable preparing for reset offline" |
15164 | " %d\n" , offline); |
15165 | |
15166 | /* Block any management I/Os to the device */ |
15167 | lpfc_block_mgmt_io(phba, LPFC_MBX_NO_WAIT); |
15168 | |
15169 | |
15170 | /* HBA_PCI_ERR was set in io_error_detect */ |
15171 | lpfc_offline_prep(phba, LPFC_MBX_NO_WAIT); |
15172 | /* Flush all driver's outstanding I/Os as we are to reset */ |
15173 | lpfc_sli_flush_io_rings(phba); |
15174 | lpfc_offline(phba); |
15175 | |
15176 | /* stop all timers */ |
15177 | lpfc_stop_hba_timers(phba); |
15178 | |
15179 | lpfc_sli4_queue_destroy(phba); |
15180 | /* Disable interrupt and pci device */ |
15181 | lpfc_sli4_disable_intr(phba); |
15182 | pci_disable_device(dev: phba->pcidev); |
15183 | } |
15184 | |
15185 | /** |
15186 | * lpfc_sli4_prep_dev_for_perm_failure - Prepare SLI4 dev for pci slot disable |
15187 | * @phba: pointer to lpfc hba data structure. |
15188 | * |
15189 | * This routine is called to prepare the SLI4 device for PCI slot permanently |
15190 | * disabling. It blocks the SCSI transport layer traffic and flushes the FCP |
15191 | * pending I/Os. |
15192 | **/ |
15193 | static void |
15194 | lpfc_sli4_prep_dev_for_perm_failure(struct lpfc_hba *phba) |
15195 | { |
15196 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15197 | "2827 PCI channel permanent disable for failure\n" ); |
15198 | |
15199 | /* Block all SCSI devices' I/Os on the host */ |
15200 | lpfc_scsi_dev_block(phba); |
15201 | |
15202 | /* stop all timers */ |
15203 | lpfc_stop_hba_timers(phba); |
15204 | |
15205 | /* Clean up all driver's outstanding I/Os */ |
15206 | lpfc_sli_flush_io_rings(phba); |
15207 | } |
15208 | |
15209 | /** |
15210 | * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device |
15211 | * @pdev: pointer to PCI device. |
15212 | * @state: the current PCI connection state. |
15213 | * |
15214 | * This routine is called from the PCI subsystem for error handling to device |
15215 | * with SLI-4 interface spec. This function is called by the PCI subsystem |
15216 | * after a PCI bus error affecting this device has been detected. When this |
15217 | * function is invoked, it will need to stop all the I/Os and interrupt(s) |
15218 | * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET |
15219 | * for the PCI subsystem to perform proper recovery as desired. |
15220 | * |
15221 | * Return codes |
15222 | * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery |
15223 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
15224 | **/ |
15225 | static pci_ers_result_t |
15226 | lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state) |
15227 | { |
15228 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15229 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15230 | bool hba_pci_err; |
15231 | |
15232 | switch (state) { |
15233 | case pci_channel_io_normal: |
15234 | /* Non-fatal error, prepare for recovery */ |
15235 | lpfc_sli4_prep_dev_for_recover(phba); |
15236 | return PCI_ERS_RESULT_CAN_RECOVER; |
15237 | case pci_channel_io_frozen: |
15238 | hba_pci_err = test_and_set_bit(nr: HBA_PCI_ERR, addr: &phba->bit_flags); |
15239 | /* Fatal error, prepare for slot reset */ |
15240 | if (!hba_pci_err) |
15241 | lpfc_sli4_prep_dev_for_reset(phba); |
15242 | else |
15243 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
15244 | "2832 Already handling PCI error " |
15245 | "state: x%x\n" , state); |
15246 | return PCI_ERS_RESULT_NEED_RESET; |
15247 | case pci_channel_io_perm_failure: |
15248 | set_bit(nr: HBA_PCI_ERR, addr: &phba->bit_flags); |
15249 | /* Permanent failure, prepare for device down */ |
15250 | lpfc_sli4_prep_dev_for_perm_failure(phba); |
15251 | return PCI_ERS_RESULT_DISCONNECT; |
15252 | default: |
15253 | hba_pci_err = test_and_set_bit(nr: HBA_PCI_ERR, addr: &phba->bit_flags); |
15254 | if (!hba_pci_err) |
15255 | lpfc_sli4_prep_dev_for_reset(phba); |
15256 | /* Unknown state, prepare and request slot reset */ |
15257 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15258 | "2825 Unknown PCI error state: x%x\n" , state); |
15259 | lpfc_sli4_prep_dev_for_reset(phba); |
15260 | return PCI_ERS_RESULT_NEED_RESET; |
15261 | } |
15262 | } |
15263 | |
15264 | /** |
15265 | * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch |
15266 | * @pdev: pointer to PCI device. |
15267 | * |
15268 | * This routine is called from the PCI subsystem for error handling to device |
15269 | * with SLI-4 interface spec. It is called after PCI bus has been reset to |
15270 | * restart the PCI card from scratch, as if from a cold-boot. During the |
15271 | * PCI subsystem error recovery, after the driver returns |
15272 | * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error |
15273 | * recovery and then call this routine before calling the .resume method to |
15274 | * recover the device. This function will initialize the HBA device, enable |
15275 | * the interrupt, but it will just put the HBA to offline state without |
15276 | * passing any I/O traffic. |
15277 | * |
15278 | * Return codes |
15279 | * PCI_ERS_RESULT_RECOVERED - the device has been recovered |
15280 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
15281 | */ |
15282 | static pci_ers_result_t |
15283 | lpfc_io_slot_reset_s4(struct pci_dev *pdev) |
15284 | { |
15285 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15286 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15287 | struct lpfc_sli *psli = &phba->sli; |
15288 | uint32_t intr_mode; |
15289 | bool hba_pci_err; |
15290 | |
15291 | dev_printk(KERN_INFO, &pdev->dev, "recovering from a slot reset.\n" ); |
15292 | if (pci_enable_device_mem(dev: pdev)) { |
15293 | printk(KERN_ERR "lpfc: Cannot re-enable " |
15294 | "PCI device after reset.\n" ); |
15295 | return PCI_ERS_RESULT_DISCONNECT; |
15296 | } |
15297 | |
15298 | pci_restore_state(dev: pdev); |
15299 | |
15300 | hba_pci_err = test_and_clear_bit(nr: HBA_PCI_ERR, addr: &phba->bit_flags); |
15301 | if (!hba_pci_err) |
15302 | dev_info(&pdev->dev, |
15303 | "hba_pci_err was not set, recovering slot reset.\n" ); |
15304 | /* |
15305 | * As the new kernel behavior of pci_restore_state() API call clears |
15306 | * device saved_state flag, need to save the restored state again. |
15307 | */ |
15308 | pci_save_state(dev: pdev); |
15309 | |
15310 | if (pdev->is_busmaster) |
15311 | pci_set_master(dev: pdev); |
15312 | |
15313 | spin_lock_irq(lock: &phba->hbalock); |
15314 | psli->sli_flag &= ~LPFC_SLI_ACTIVE; |
15315 | spin_unlock_irq(lock: &phba->hbalock); |
15316 | |
15317 | /* Init cpu_map array */ |
15318 | lpfc_cpu_map_array_init(phba); |
15319 | /* Configure and enable interrupt */ |
15320 | intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode: phba->intr_mode); |
15321 | if (intr_mode == LPFC_INTR_ERROR) { |
15322 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15323 | "2824 Cannot re-enable interrupt after " |
15324 | "slot reset.\n" ); |
15325 | return PCI_ERS_RESULT_DISCONNECT; |
15326 | } else |
15327 | phba->intr_mode = intr_mode; |
15328 | lpfc_cpu_affinity_check(phba, vectors: phba->cfg_irq_chann); |
15329 | |
15330 | /* Log the current active interrupt mode */ |
15331 | lpfc_log_intr_mode(phba, intr_mode: phba->intr_mode); |
15332 | |
15333 | return PCI_ERS_RESULT_RECOVERED; |
15334 | } |
15335 | |
15336 | /** |
15337 | * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device |
15338 | * @pdev: pointer to PCI device |
15339 | * |
15340 | * This routine is called from the PCI subsystem for error handling to device |
15341 | * with SLI-4 interface spec. It is called when kernel error recovery tells |
15342 | * the lpfc driver that it is ok to resume normal PCI operation after PCI bus |
15343 | * error recovery. After this call, traffic can start to flow from this device |
15344 | * again. |
15345 | **/ |
15346 | static void |
15347 | lpfc_io_resume_s4(struct pci_dev *pdev) |
15348 | { |
15349 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15350 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15351 | |
15352 | /* |
15353 | * In case of slot reset, as function reset is performed through |
15354 | * mailbox command which needs DMA to be enabled, this operation |
15355 | * has to be moved to the io resume phase. Taking device offline |
15356 | * will perform the necessary cleanup. |
15357 | */ |
15358 | if (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE)) { |
15359 | /* Perform device reset */ |
15360 | lpfc_sli_brdrestart(phba); |
15361 | /* Bring the device back online */ |
15362 | lpfc_online(phba); |
15363 | } |
15364 | } |
15365 | |
15366 | /** |
15367 | * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem |
15368 | * @pdev: pointer to PCI device |
15369 | * @pid: pointer to PCI device identifier |
15370 | * |
15371 | * This routine is to be registered to the kernel's PCI subsystem. When an |
15372 | * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks |
15373 | * at PCI device-specific information of the device and driver to see if the |
15374 | * driver state that it can support this kind of device. If the match is |
15375 | * successful, the driver core invokes this routine. This routine dispatches |
15376 | * the action to the proper SLI-3 or SLI-4 device probing routine, which will |
15377 | * do all the initialization that it needs to do to handle the HBA device |
15378 | * properly. |
15379 | * |
15380 | * Return code |
15381 | * 0 - driver can claim the device |
15382 | * negative value - driver can not claim the device |
15383 | **/ |
15384 | static int |
15385 | lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) |
15386 | { |
15387 | int rc; |
15388 | struct lpfc_sli_intf intf; |
15389 | |
15390 | if (pci_read_config_dword(dev: pdev, LPFC_SLI_INTF, val: &intf.word0)) |
15391 | return -ENODEV; |
15392 | |
15393 | if ((bf_get(lpfc_sli_intf_valid, &intf) == LPFC_SLI_INTF_VALID) && |
15394 | (bf_get(lpfc_sli_intf_slirev, &intf) == LPFC_SLI_INTF_REV_SLI4)) |
15395 | rc = lpfc_pci_probe_one_s4(pdev, pid); |
15396 | else |
15397 | rc = lpfc_pci_probe_one_s3(pdev, pid); |
15398 | |
15399 | return rc; |
15400 | } |
15401 | |
15402 | /** |
15403 | * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem |
15404 | * @pdev: pointer to PCI device |
15405 | * |
15406 | * This routine is to be registered to the kernel's PCI subsystem. When an |
15407 | * Emulex HBA is removed from PCI bus, the driver core invokes this routine. |
15408 | * This routine dispatches the action to the proper SLI-3 or SLI-4 device |
15409 | * remove routine, which will perform all the necessary cleanup for the |
15410 | * device to be removed from the PCI subsystem properly. |
15411 | **/ |
15412 | static void |
15413 | lpfc_pci_remove_one(struct pci_dev *pdev) |
15414 | { |
15415 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15416 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15417 | |
15418 | switch (phba->pci_dev_grp) { |
15419 | case LPFC_PCI_DEV_LP: |
15420 | lpfc_pci_remove_one_s3(pdev); |
15421 | break; |
15422 | case LPFC_PCI_DEV_OC: |
15423 | lpfc_pci_remove_one_s4(pdev); |
15424 | break; |
15425 | default: |
15426 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15427 | "1424 Invalid PCI device group: 0x%x\n" , |
15428 | phba->pci_dev_grp); |
15429 | break; |
15430 | } |
15431 | return; |
15432 | } |
15433 | |
15434 | /** |
15435 | * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management |
15436 | * @dev: pointer to device |
15437 | * |
15438 | * This routine is to be registered to the kernel's PCI subsystem to support |
15439 | * system Power Management (PM). When PM invokes this method, it dispatches |
15440 | * the action to the proper SLI-3 or SLI-4 device suspend routine, which will |
15441 | * suspend the device. |
15442 | * |
15443 | * Return code |
15444 | * 0 - driver suspended the device |
15445 | * Error otherwise |
15446 | **/ |
15447 | static int __maybe_unused |
15448 | lpfc_pci_suspend_one(struct device *dev) |
15449 | { |
15450 | struct Scsi_Host *shost = dev_get_drvdata(dev); |
15451 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15452 | int rc = -ENODEV; |
15453 | |
15454 | switch (phba->pci_dev_grp) { |
15455 | case LPFC_PCI_DEV_LP: |
15456 | rc = lpfc_pci_suspend_one_s3(dev_d: dev); |
15457 | break; |
15458 | case LPFC_PCI_DEV_OC: |
15459 | rc = lpfc_pci_suspend_one_s4(dev_d: dev); |
15460 | break; |
15461 | default: |
15462 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15463 | "1425 Invalid PCI device group: 0x%x\n" , |
15464 | phba->pci_dev_grp); |
15465 | break; |
15466 | } |
15467 | return rc; |
15468 | } |
15469 | |
15470 | /** |
15471 | * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management |
15472 | * @dev: pointer to device |
15473 | * |
15474 | * This routine is to be registered to the kernel's PCI subsystem to support |
15475 | * system Power Management (PM). When PM invokes this method, it dispatches |
15476 | * the action to the proper SLI-3 or SLI-4 device resume routine, which will |
15477 | * resume the device. |
15478 | * |
15479 | * Return code |
15480 | * 0 - driver suspended the device |
15481 | * Error otherwise |
15482 | **/ |
15483 | static int __maybe_unused |
15484 | lpfc_pci_resume_one(struct device *dev) |
15485 | { |
15486 | struct Scsi_Host *shost = dev_get_drvdata(dev); |
15487 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15488 | int rc = -ENODEV; |
15489 | |
15490 | switch (phba->pci_dev_grp) { |
15491 | case LPFC_PCI_DEV_LP: |
15492 | rc = lpfc_pci_resume_one_s3(dev_d: dev); |
15493 | break; |
15494 | case LPFC_PCI_DEV_OC: |
15495 | rc = lpfc_pci_resume_one_s4(dev_d: dev); |
15496 | break; |
15497 | default: |
15498 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15499 | "1426 Invalid PCI device group: 0x%x\n" , |
15500 | phba->pci_dev_grp); |
15501 | break; |
15502 | } |
15503 | return rc; |
15504 | } |
15505 | |
15506 | /** |
15507 | * lpfc_io_error_detected - lpfc method for handling PCI I/O error |
15508 | * @pdev: pointer to PCI device. |
15509 | * @state: the current PCI connection state. |
15510 | * |
15511 | * This routine is registered to the PCI subsystem for error handling. This |
15512 | * function is called by the PCI subsystem after a PCI bus error affecting |
15513 | * this device has been detected. When this routine is invoked, it dispatches |
15514 | * the action to the proper SLI-3 or SLI-4 device error detected handling |
15515 | * routine, which will perform the proper error detected operation. |
15516 | * |
15517 | * Return codes |
15518 | * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery |
15519 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
15520 | **/ |
15521 | static pci_ers_result_t |
15522 | lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state) |
15523 | { |
15524 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15525 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15526 | pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT; |
15527 | |
15528 | if (phba->link_state == LPFC_HBA_ERROR && |
15529 | phba->hba_flag & HBA_IOQ_FLUSH) |
15530 | return PCI_ERS_RESULT_NEED_RESET; |
15531 | |
15532 | switch (phba->pci_dev_grp) { |
15533 | case LPFC_PCI_DEV_LP: |
15534 | rc = lpfc_io_error_detected_s3(pdev, state); |
15535 | break; |
15536 | case LPFC_PCI_DEV_OC: |
15537 | rc = lpfc_io_error_detected_s4(pdev, state); |
15538 | break; |
15539 | default: |
15540 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15541 | "1427 Invalid PCI device group: 0x%x\n" , |
15542 | phba->pci_dev_grp); |
15543 | break; |
15544 | } |
15545 | return rc; |
15546 | } |
15547 | |
15548 | /** |
15549 | * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch |
15550 | * @pdev: pointer to PCI device. |
15551 | * |
15552 | * This routine is registered to the PCI subsystem for error handling. This |
15553 | * function is called after PCI bus has been reset to restart the PCI card |
15554 | * from scratch, as if from a cold-boot. When this routine is invoked, it |
15555 | * dispatches the action to the proper SLI-3 or SLI-4 device reset handling |
15556 | * routine, which will perform the proper device reset. |
15557 | * |
15558 | * Return codes |
15559 | * PCI_ERS_RESULT_RECOVERED - the device has been recovered |
15560 | * PCI_ERS_RESULT_DISCONNECT - device could not be recovered |
15561 | **/ |
15562 | static pci_ers_result_t |
15563 | lpfc_io_slot_reset(struct pci_dev *pdev) |
15564 | { |
15565 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15566 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15567 | pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT; |
15568 | |
15569 | switch (phba->pci_dev_grp) { |
15570 | case LPFC_PCI_DEV_LP: |
15571 | rc = lpfc_io_slot_reset_s3(pdev); |
15572 | break; |
15573 | case LPFC_PCI_DEV_OC: |
15574 | rc = lpfc_io_slot_reset_s4(pdev); |
15575 | break; |
15576 | default: |
15577 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15578 | "1428 Invalid PCI device group: 0x%x\n" , |
15579 | phba->pci_dev_grp); |
15580 | break; |
15581 | } |
15582 | return rc; |
15583 | } |
15584 | |
15585 | /** |
15586 | * lpfc_io_resume - lpfc method for resuming PCI I/O operation |
15587 | * @pdev: pointer to PCI device |
15588 | * |
15589 | * This routine is registered to the PCI subsystem for error handling. It |
15590 | * is called when kernel error recovery tells the lpfc driver that it is |
15591 | * OK to resume normal PCI operation after PCI bus error recovery. When |
15592 | * this routine is invoked, it dispatches the action to the proper SLI-3 |
15593 | * or SLI-4 device io_resume routine, which will resume the device operation. |
15594 | **/ |
15595 | static void |
15596 | lpfc_io_resume(struct pci_dev *pdev) |
15597 | { |
15598 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
15599 | struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba; |
15600 | |
15601 | switch (phba->pci_dev_grp) { |
15602 | case LPFC_PCI_DEV_LP: |
15603 | lpfc_io_resume_s3(pdev); |
15604 | break; |
15605 | case LPFC_PCI_DEV_OC: |
15606 | lpfc_io_resume_s4(pdev); |
15607 | break; |
15608 | default: |
15609 | lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, |
15610 | "1429 Invalid PCI device group: 0x%x\n" , |
15611 | phba->pci_dev_grp); |
15612 | break; |
15613 | } |
15614 | return; |
15615 | } |
15616 | |
15617 | /** |
15618 | * lpfc_sli4_oas_verify - Verify OAS is supported by this adapter |
15619 | * @phba: pointer to lpfc hba data structure. |
15620 | * |
15621 | * This routine checks to see if OAS is supported for this adapter. If |
15622 | * supported, the configure Flash Optimized Fabric flag is set. Otherwise, |
15623 | * the enable oas flag is cleared and the pool created for OAS device data |
15624 | * is destroyed. |
15625 | * |
15626 | **/ |
15627 | static void |
15628 | lpfc_sli4_oas_verify(struct lpfc_hba *phba) |
15629 | { |
15630 | |
15631 | if (!phba->cfg_EnableXLane) |
15632 | return; |
15633 | |
15634 | if (phba->sli4_hba.pc_sli4_params.oas_supported) { |
15635 | phba->cfg_fof = 1; |
15636 | } else { |
15637 | phba->cfg_fof = 0; |
15638 | mempool_destroy(pool: phba->device_data_mem_pool); |
15639 | phba->device_data_mem_pool = NULL; |
15640 | } |
15641 | |
15642 | return; |
15643 | } |
15644 | |
15645 | /** |
15646 | * lpfc_sli4_ras_init - Verify RAS-FW log is supported by this adapter |
15647 | * @phba: pointer to lpfc hba data structure. |
15648 | * |
15649 | * This routine checks to see if RAS is supported by the adapter. Check the |
15650 | * function through which RAS support enablement is to be done. |
15651 | **/ |
15652 | void |
15653 | lpfc_sli4_ras_init(struct lpfc_hba *phba) |
15654 | { |
15655 | /* if ASIC_GEN_NUM >= 0xC) */ |
15656 | if ((bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == |
15657 | LPFC_SLI_INTF_IF_TYPE_6) || |
15658 | (bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf) == |
15659 | LPFC_SLI_INTF_FAMILY_G6)) { |
15660 | phba->ras_fwlog.ras_hwsupport = true; |
15661 | if (phba->cfg_ras_fwlog_func == PCI_FUNC(phba->pcidev->devfn) && |
15662 | phba->cfg_ras_fwlog_buffsize) |
15663 | phba->ras_fwlog.ras_enabled = true; |
15664 | else |
15665 | phba->ras_fwlog.ras_enabled = false; |
15666 | } else { |
15667 | phba->ras_fwlog.ras_hwsupport = false; |
15668 | } |
15669 | } |
15670 | |
15671 | |
15672 | MODULE_DEVICE_TABLE(pci, lpfc_id_table); |
15673 | |
15674 | static const struct pci_error_handlers lpfc_err_handler = { |
15675 | .error_detected = lpfc_io_error_detected, |
15676 | .slot_reset = lpfc_io_slot_reset, |
15677 | .resume = lpfc_io_resume, |
15678 | }; |
15679 | |
15680 | static SIMPLE_DEV_PM_OPS(lpfc_pci_pm_ops_one, |
15681 | lpfc_pci_suspend_one, |
15682 | lpfc_pci_resume_one); |
15683 | |
15684 | static struct pci_driver lpfc_driver = { |
15685 | .name = LPFC_DRIVER_NAME, |
15686 | .id_table = lpfc_id_table, |
15687 | .probe = lpfc_pci_probe_one, |
15688 | .remove = lpfc_pci_remove_one, |
15689 | .shutdown = lpfc_pci_remove_one, |
15690 | .driver.pm = &lpfc_pci_pm_ops_one, |
15691 | .err_handler = &lpfc_err_handler, |
15692 | }; |
15693 | |
15694 | static const struct file_operations lpfc_mgmt_fop = { |
15695 | .owner = THIS_MODULE, |
15696 | }; |
15697 | |
15698 | static struct miscdevice lpfc_mgmt_dev = { |
15699 | .minor = MISC_DYNAMIC_MINOR, |
15700 | .name = "lpfcmgmt" , |
15701 | .fops = &lpfc_mgmt_fop, |
15702 | }; |
15703 | |
15704 | /** |
15705 | * lpfc_init - lpfc module initialization routine |
15706 | * |
15707 | * This routine is to be invoked when the lpfc module is loaded into the |
15708 | * kernel. The special kernel macro module_init() is used to indicate the |
15709 | * role of this routine to the kernel as lpfc module entry point. |
15710 | * |
15711 | * Return codes |
15712 | * 0 - successful |
15713 | * -ENOMEM - FC attach transport failed |
15714 | * all others - failed |
15715 | */ |
15716 | static int __init |
15717 | lpfc_init(void) |
15718 | { |
15719 | int error = 0; |
15720 | |
15721 | pr_info(LPFC_MODULE_DESC "\n" ); |
15722 | pr_info(LPFC_COPYRIGHT "\n" ); |
15723 | |
15724 | error = misc_register(misc: &lpfc_mgmt_dev); |
15725 | if (error) |
15726 | printk(KERN_ERR "Could not register lpfcmgmt device, " |
15727 | "misc_register returned with status %d" , error); |
15728 | |
15729 | error = -ENOMEM; |
15730 | lpfc_transport_functions.vport_create = lpfc_vport_create; |
15731 | lpfc_transport_functions.vport_delete = lpfc_vport_delete; |
15732 | lpfc_transport_template = |
15733 | fc_attach_transport(&lpfc_transport_functions); |
15734 | if (lpfc_transport_template == NULL) |
15735 | goto unregister; |
15736 | lpfc_vport_transport_template = |
15737 | fc_attach_transport(&lpfc_vport_transport_functions); |
15738 | if (lpfc_vport_transport_template == NULL) { |
15739 | fc_release_transport(lpfc_transport_template); |
15740 | goto unregister; |
15741 | } |
15742 | lpfc_wqe_cmd_template(); |
15743 | lpfc_nvmet_cmd_template(); |
15744 | |
15745 | /* Initialize in case vector mapping is needed */ |
15746 | lpfc_present_cpu = num_present_cpus(); |
15747 | |
15748 | lpfc_pldv_detect = false; |
15749 | |
15750 | error = cpuhp_setup_state_multi(state: CPUHP_AP_ONLINE_DYN, |
15751 | name: "lpfc/sli4:online" , |
15752 | startup: lpfc_cpu_online, teardown: lpfc_cpu_offline); |
15753 | if (error < 0) |
15754 | goto cpuhp_failure; |
15755 | lpfc_cpuhp_state = error; |
15756 | |
15757 | error = pci_register_driver(&lpfc_driver); |
15758 | if (error) |
15759 | goto unwind; |
15760 | |
15761 | return error; |
15762 | |
15763 | unwind: |
15764 | cpuhp_remove_multi_state(state: lpfc_cpuhp_state); |
15765 | cpuhp_failure: |
15766 | fc_release_transport(lpfc_transport_template); |
15767 | fc_release_transport(lpfc_vport_transport_template); |
15768 | unregister: |
15769 | misc_deregister(misc: &lpfc_mgmt_dev); |
15770 | |
15771 | return error; |
15772 | } |
15773 | |
15774 | void lpfc_dmp_dbg(struct lpfc_hba *phba) |
15775 | { |
15776 | unsigned int start_idx; |
15777 | unsigned int dbg_cnt; |
15778 | unsigned int temp_idx; |
15779 | int i; |
15780 | int j = 0; |
15781 | unsigned long rem_nsec; |
15782 | |
15783 | if (atomic_cmpxchg(v: &phba->dbg_log_dmping, old: 0, new: 1) != 0) |
15784 | return; |
15785 | |
15786 | start_idx = (unsigned int)atomic_read(v: &phba->dbg_log_idx) % DBG_LOG_SZ; |
15787 | dbg_cnt = (unsigned int)atomic_read(v: &phba->dbg_log_cnt); |
15788 | if (!dbg_cnt) |
15789 | goto out; |
15790 | temp_idx = start_idx; |
15791 | if (dbg_cnt >= DBG_LOG_SZ) { |
15792 | dbg_cnt = DBG_LOG_SZ; |
15793 | temp_idx -= 1; |
15794 | } else { |
15795 | if ((start_idx + dbg_cnt) > (DBG_LOG_SZ - 1)) { |
15796 | temp_idx = (start_idx + dbg_cnt) % DBG_LOG_SZ; |
15797 | } else { |
15798 | if (start_idx < dbg_cnt) |
15799 | start_idx = DBG_LOG_SZ - (dbg_cnt - start_idx); |
15800 | else |
15801 | start_idx -= dbg_cnt; |
15802 | } |
15803 | } |
15804 | dev_info(&phba->pcidev->dev, "start %d end %d cnt %d\n" , |
15805 | start_idx, temp_idx, dbg_cnt); |
15806 | |
15807 | for (i = 0; i < dbg_cnt; i++) { |
15808 | if ((start_idx + i) < DBG_LOG_SZ) |
15809 | temp_idx = (start_idx + i) % DBG_LOG_SZ; |
15810 | else |
15811 | temp_idx = j++; |
15812 | rem_nsec = do_div(phba->dbg_log[temp_idx].t_ns, NSEC_PER_SEC); |
15813 | dev_info(&phba->pcidev->dev, "%d: [%5lu.%06lu] %s" , |
15814 | temp_idx, |
15815 | (unsigned long)phba->dbg_log[temp_idx].t_ns, |
15816 | rem_nsec / 1000, |
15817 | phba->dbg_log[temp_idx].log); |
15818 | } |
15819 | out: |
15820 | atomic_set(v: &phba->dbg_log_cnt, i: 0); |
15821 | atomic_set(v: &phba->dbg_log_dmping, i: 0); |
15822 | } |
15823 | |
15824 | __printf(2, 3) |
15825 | void lpfc_dbg_print(struct lpfc_hba *phba, const char *fmt, ...) |
15826 | { |
15827 | unsigned int idx; |
15828 | va_list args; |
15829 | int dbg_dmping = atomic_read(v: &phba->dbg_log_dmping); |
15830 | struct va_format vaf; |
15831 | |
15832 | |
15833 | va_start(args, fmt); |
15834 | if (unlikely(dbg_dmping)) { |
15835 | vaf.fmt = fmt; |
15836 | vaf.va = &args; |
15837 | dev_info(&phba->pcidev->dev, "%pV" , &vaf); |
15838 | va_end(args); |
15839 | return; |
15840 | } |
15841 | idx = (unsigned int)atomic_fetch_add(i: 1, v: &phba->dbg_log_idx) % |
15842 | DBG_LOG_SZ; |
15843 | |
15844 | atomic_inc(v: &phba->dbg_log_cnt); |
15845 | |
15846 | vscnprintf(buf: phba->dbg_log[idx].log, |
15847 | size: sizeof(phba->dbg_log[idx].log), fmt, args); |
15848 | va_end(args); |
15849 | |
15850 | phba->dbg_log[idx].t_ns = local_clock(); |
15851 | } |
15852 | |
15853 | /** |
15854 | * lpfc_exit - lpfc module removal routine |
15855 | * |
15856 | * This routine is invoked when the lpfc module is removed from the kernel. |
15857 | * The special kernel macro module_exit() is used to indicate the role of |
15858 | * this routine to the kernel as lpfc module exit point. |
15859 | */ |
15860 | static void __exit |
15861 | lpfc_exit(void) |
15862 | { |
15863 | misc_deregister(misc: &lpfc_mgmt_dev); |
15864 | pci_unregister_driver(dev: &lpfc_driver); |
15865 | cpuhp_remove_multi_state(state: lpfc_cpuhp_state); |
15866 | fc_release_transport(lpfc_transport_template); |
15867 | fc_release_transport(lpfc_vport_transport_template); |
15868 | idr_destroy(&lpfc_hba_index); |
15869 | } |
15870 | |
15871 | module_init(lpfc_init); |
15872 | module_exit(lpfc_exit); |
15873 | MODULE_LICENSE("GPL" ); |
15874 | MODULE_DESCRIPTION(LPFC_MODULE_DESC); |
15875 | MODULE_AUTHOR("Broadcom" ); |
15876 | MODULE_VERSION("0:" LPFC_DRIVER_VERSION); |
15877 | |