1/* SPDX-License-Identifier: GPL-2.0 */
2
3#ifndef _ST_H
4#define _ST_H
5
6#include <linux/completion.h>
7#include <linux/mutex.h>
8#include <linux/kref.h>
9#include <scsi/scsi_cmnd.h>
10
11/* Descriptor for analyzed sense data */
12struct st_cmdstatus {
13 int midlevel_result;
14 struct scsi_sense_hdr sense_hdr;
15 int have_sense;
16 int residual;
17 u64 uremainder64;
18 u8 flags;
19 u8 remainder_valid;
20 u8 fixed_format;
21 u8 deferred;
22};
23
24struct scsi_tape;
25
26/* scsi tape command */
27struct st_request {
28 unsigned char cmd[MAX_COMMAND_SIZE];
29 unsigned char sense[SCSI_SENSE_BUFFERSIZE];
30 int result;
31 struct scsi_tape *stp;
32 struct completion *waiting;
33 struct bio *bio;
34};
35
36/* The tape buffer descriptor. */
37struct st_buffer {
38 unsigned char cleared; /* internal buffer cleared after open? */
39 unsigned short do_dio; /* direct i/o set up? */
40 int buffer_size;
41 int buffer_blocks;
42 int buffer_bytes;
43 int read_pointer;
44 int writing;
45 int syscall_result;
46 struct st_request *last_SRpnt;
47 struct st_cmdstatus cmdstat;
48 struct page **reserved_pages;
49 int reserved_page_order;
50 struct page **mapped_pages;
51 struct rq_map_data map_data;
52 unsigned char *b_data;
53 unsigned short use_sg; /* zero or max number of s/g segments for this adapter */
54 unsigned short sg_segs; /* number of segments in s/g list */
55 unsigned short frp_segs; /* number of buffer segments */
56};
57
58/* The tape mode definition */
59struct st_modedef {
60 unsigned char defined;
61 unsigned char sysv; /* SYS V semantics? */
62 unsigned char do_async_writes;
63 unsigned char do_buffer_writes;
64 unsigned char do_read_ahead;
65 unsigned char defaults_for_writes;
66 unsigned char default_compression; /* 0 = don't touch, etc */
67 short default_density; /* Forced density, -1 = no value */
68 int default_blksize; /* Forced blocksize, -1 = no value */
69 struct scsi_tape *tape;
70 struct device *devs[2]; /* Auto-rewind and non-rewind devices */
71 struct cdev *cdevs[2]; /* Auto-rewind and non-rewind devices */
72};
73
74/* Number of modes can be changed by changing ST_NBR_MODE_BITS. The maximum
75 number of modes is 16 (ST_NBR_MODE_BITS 4) */
76#define ST_NBR_MODE_BITS 2
77#define ST_NBR_MODES (1 << ST_NBR_MODE_BITS)
78#define ST_MODE_SHIFT (7 - ST_NBR_MODE_BITS)
79#define ST_MODE_MASK ((ST_NBR_MODES - 1) << ST_MODE_SHIFT)
80
81#define ST_MAX_TAPES (1 << (20 - (ST_NBR_MODE_BITS + 1)))
82#define ST_MAX_TAPE_ENTRIES (ST_MAX_TAPES << (ST_NBR_MODE_BITS + 1))
83
84/* The status related to each partition */
85struct st_partstat {
86 unsigned char rw;
87 unsigned char eof;
88 unsigned char at_sm;
89 unsigned char last_block_valid;
90 u32 last_block_visited;
91 int drv_block; /* The block where the drive head is */
92 int drv_file;
93};
94
95/* Tape statistics */
96struct scsi_tape_stats {
97 atomic64_t read_byte_cnt; /* bytes read */
98 atomic64_t write_byte_cnt; /* bytes written */
99 atomic64_t in_flight; /* Number of I/Os in flight */
100 atomic64_t read_cnt; /* Count of read requests */
101 atomic64_t write_cnt; /* Count of write requests */
102 atomic64_t other_cnt; /* Count of other requests either
103 * implicit or from user space
104 * ioctl. */
105 atomic64_t resid_cnt; /* Count of resid_len > 0 */
106 atomic64_t tot_read_time; /* ktime spent completing reads */
107 atomic64_t tot_write_time; /* ktime spent completing writes */
108 atomic64_t tot_io_time; /* ktime spent doing any I/O */
109 ktime_t read_time; /* holds ktime request was queued */
110 ktime_t write_time; /* holds ktime request was queued */
111 ktime_t other_time; /* holds ktime request was queued */
112 atomic_t last_read_size; /* Number of bytes issued for last read */
113 atomic_t last_write_size; /* Number of bytes issued for last write */
114};
115
116#define ST_NBR_PARTITIONS 4
117
118/* The tape drive descriptor */
119struct scsi_tape {
120 struct scsi_device *device;
121 struct mutex lock; /* For serialization */
122 struct completion wait; /* For SCSI commands */
123 struct st_buffer *buffer;
124 int index;
125
126 /* Drive characteristics */
127 unsigned char omit_blklims;
128 unsigned char do_auto_lock;
129 unsigned char can_bsr;
130 unsigned char can_partitions;
131 unsigned char two_fm;
132 unsigned char fast_mteom;
133 unsigned char immediate;
134 unsigned char scsi2_logical;
135 unsigned char default_drvbuffer; /* 0xff = don't touch, value 3 bits */
136 unsigned char cln_mode; /* 0 = none, otherwise sense byte nbr */
137 unsigned char cln_sense_value;
138 unsigned char cln_sense_mask;
139 unsigned char use_pf; /* Set Page Format bit in all mode selects? */
140 unsigned char try_dio; /* try direct i/o in general? */
141 unsigned char try_dio_now; /* try direct i/o before next close? */
142 unsigned char c_algo; /* compression algorithm */
143 unsigned char pos_unknown; /* after reset position unknown */
144 unsigned char sili; /* use SILI when reading in variable b mode */
145 unsigned char immediate_filemark; /* write filemark immediately */
146 int tape_type;
147 int long_timeout; /* timeout for commands known to take long time */
148
149 /* Mode characteristics */
150 struct st_modedef modes[ST_NBR_MODES];
151 int current_mode;
152
153 /* Status variables */
154 int partition;
155 int new_partition;
156 int nbr_partitions; /* zero until partition support enabled */
157 struct st_partstat ps[ST_NBR_PARTITIONS];
158 unsigned char dirty;
159 unsigned char ready;
160 unsigned char write_prot;
161 unsigned char drv_write_prot;
162 unsigned char in_use;
163 unsigned char blksize_changed;
164 unsigned char density_changed;
165 unsigned char compression_changed;
166 unsigned char drv_buffer;
167 unsigned char density;
168 unsigned char door_locked;
169 unsigned char autorew_dev; /* auto-rewind device */
170 unsigned char rew_at_close; /* rewind necessary at close */
171 unsigned char inited;
172 unsigned char cleaning_req; /* cleaning requested? */
173 int block_size;
174 int min_block;
175 int max_block;
176 int recover_count; /* From tape opening */
177 int recover_reg; /* From last status call */
178
179#if DEBUG
180 unsigned char write_pending;
181 int nbr_finished;
182 int nbr_waits;
183 int nbr_requests;
184 int nbr_dio;
185 int nbr_pages;
186 unsigned char last_cmnd[6];
187 unsigned char last_sense[16];
188#endif
189 char name[DISK_NAME_LEN];
190 struct kref kref;
191 struct scsi_tape_stats *stats;
192};
193
194/* Bit masks for use_pf */
195#define USE_PF 1
196#define PF_TESTED 2
197
198/* Values of eof */
199#define ST_NOEOF 0
200#define ST_FM_HIT 1
201#define ST_FM 2
202#define ST_EOM_OK 3
203#define ST_EOM_ERROR 4
204#define ST_EOD_1 5
205#define ST_EOD_2 6
206#define ST_EOD 7
207/* EOD hit while reading => ST_EOD_1 => return zero => ST_EOD_2 =>
208 return zero => ST_EOD, return ENOSPC */
209/* When writing: ST_EOM_OK == early warning found, write OK
210 ST_EOD_1 == allow trying new write after early warning
211 ST_EOM_ERROR == early warning found, not able to write all */
212
213/* Values of rw */
214#define ST_IDLE 0
215#define ST_READING 1
216#define ST_WRITING 2
217
218/* Values of ready state */
219#define ST_READY 0
220#define ST_NOT_READY 1
221#define ST_NO_TAPE 2
222
223/* Values for door lock state */
224#define ST_UNLOCKED 0
225#define ST_LOCKED_EXPLICIT 1
226#define ST_LOCKED_AUTO 2
227#define ST_LOCK_FAILS 3
228
229/* Positioning SCSI-commands for Tandberg, etc. drives */
230#define QFA_REQUEST_BLOCK 0x02
231#define QFA_SEEK_BLOCK 0x0c
232
233/* Setting the binary options */
234#define ST_DONT_TOUCH 0
235#define ST_NO 1
236#define ST_YES 2
237
238#define EXTENDED_SENSE_START 18
239
240/* Masks for some conditions in the sense data */
241#define SENSE_FMK 0x80
242#define SENSE_EOM 0x40
243#define SENSE_ILI 0x20
244
245#endif
246

source code of linux/drivers/scsi/st.h