1// SPDX-License-Identifier: GPL-2.0
2/* Driver for Microtek Scanmaker X6 USB scanner, and possibly others.
3 *
4 * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
5 * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>
6 *
7 * Parts shamelessly stolen from usb-storage and copyright by their
8 * authors. Thanks to Matt Dharm for giving us permission!
9 *
10 * This driver implements a SCSI host controller driver and a USB
11 * device driver. To avoid confusion, all the USB related stuff is
12 * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_.
13 *
14 * Microtek (www.microtek.com) did not release the specifications for
15 * their USB protocol to us, so we had to reverse engineer them. We
16 * don't know for which models they are valid.
17 *
18 * The X6 USB has three bulk endpoints, one output (0x1) down which
19 * commands and outgoing data are sent, and two input: 0x82 from which
20 * normal data is read from the scanner (in packets of maximum 32
21 * bytes) and from which the status byte is read, and 0x83 from which
22 * the results of a scan (or preview) are read in up to 64 * 1024 byte
23 * chunks by the Windows driver. We don't know how much it is possible
24 * to read at a time from 0x83.
25 *
26 * It seems possible to read (with URB transfers) everything from 0x82
27 * in one go, without bothering to read in 32 byte chunks.
28 *
29 * There seems to be an optimisation of a further READ implicit if
30 * you simply read from 0x83.
31 *
32 * Guessed protocol:
33 *
34 * Send raw SCSI command to EP 0x1
35 *
36 * If there is data to receive:
37 * If the command was READ datatype=image:
38 * Read a lot of data from EP 0x83
39 * Else:
40 * Read data from EP 0x82
41 * Else:
42 * If there is data to transmit:
43 * Write it to EP 0x1
44 *
45 * Read status byte from EP 0x82
46 *
47 * References:
48 *
49 * The SCSI command set for the scanner is available from
50 * ftp://ftp.microtek.com/microtek/devpack/
51 *
52 * Microtek NV sent us a more up to date version of the document. If
53 * you want it, just send mail.
54 *
55 * Status:
56 *
57 * Untested with multiple scanners.
58 * Untested on SMP.
59 * Untested on a bigendian machine.
60 *
61 * History:
62 *
63 * 20000417 starting history
64 * 20000417 fixed load oops
65 * 20000417 fixed unload oops
66 * 20000419 fixed READ IMAGE detection
67 * 20000424 started conversion to use URBs
68 * 20000502 handled short transfers as errors
69 * 20000513 rename and organisation of functions (john)
70 * 20000513 added IDs for all products supported by Windows driver (john)
71 * 20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
72 * 20000514 Version 0.0.8j
73 * 20000514 Fix reporting of non-existent devices to SCSI layer (john)
74 * 20000514 Added MTS_DEBUG_INT (john)
75 * 20000514 Changed "usb-microtek" to "microtek" for consistency (john)
76 * 20000514 Stupid bug fixes (john)
77 * 20000514 Version 0.0.9j
78 * 20000515 Put transfer context and URB in mts_desc (john)
79 * 20000515 Added prelim turn off debugging support (john)
80 * 20000515 Version 0.0.10j
81 * 20000515 Fixed up URB allocation (clear URB on alloc) (john)
82 * 20000515 Version 0.0.11j
83 * 20000516 Removed unnecessary spinlock in mts_transfer_context (john)
84 * 20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john)
85 * 20000516 Implemented (badly) scsi_abort (john)
86 * 20000516 Version 0.0.12j
87 * 20000517 Hopefully removed mts_remove_nolock quasideadlock (john)
88 * 20000517 Added mts_debug_dump to print ll USB info (john)
89 * 20000518 Tweaks and documentation updates (john)
90 * 20000518 Version 0.0.13j
91 * 20000518 Cleaned up abort handling (john)
92 * 20000523 Removed scsi_command and various scsi_..._resets (john)
93 * 20000523 Added unlink URB on scsi_abort, now OHCI supports it (john)
94 * 20000523 Fixed last tiresome compile warning (john)
95 * 20000523 Version 0.0.14j (though version 0.1 has come out?)
96 * 20000602 Added primitive reset
97 * 20000602 Version 0.2.0
98 * 20000603 various cosmetic changes
99 * 20000603 Version 0.2.1
100 * 20000620 minor cosmetic changes
101 * 20000620 Version 0.2.2
102 * 20000822 Hopefully fixed deadlock in mts_remove_nolock()
103 * 20000822 Fixed minor race in mts_transfer_cleanup()
104 * 20000822 Fixed deadlock on submission error in queuecommand
105 * 20000822 Version 0.2.3
106 * 20000913 Reduced module size if debugging is off
107 * 20000913 Version 0.2.4
108 * 20010210 New abort logic
109 * 20010210 Version 0.3.0
110 * 20010217 Merged scatter/gather
111 * 20010218 Version 0.4.0
112 * 20010218 Cosmetic fixes
113 * 20010218 Version 0.4.1
114 * 20010306 Abort while using scatter/gather
115 * 20010306 Version 0.4.2
116 * 20010311 Remove all timeouts and tidy up generally (john)
117 * 20010320 check return value of scsi_register()
118 * 20010320 Version 0.4.3
119 * 20010408 Identify version on module load.
120 * 20011003 Fix multiple requests
121 */
122
123#include <linux/module.h>
124#include <linux/kernel.h>
125#include <linux/signal.h>
126#include <linux/errno.h>
127#include <linux/random.h>
128#include <linux/poll.h>
129#include <linux/slab.h>
130#include <linux/spinlock.h>
131#include <linux/usb.h>
132#include <linux/proc_fs.h>
133#include <linux/atomic.h>
134#include <linux/blkdev.h>
135
136#include <scsi/scsi.h>
137#include <scsi/scsi_cmnd.h>
138#include <scsi/scsi_device.h>
139#include <scsi/scsi_eh.h>
140#include <scsi/scsi_host.h>
141#include <scsi/scsi_tcq.h>
142
143#include "microtek.h"
144
145#define DRIVER_AUTHOR "John Fremlin <vii@penguinpowered.com>, Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>"
146#define DRIVER_DESC "Microtek Scanmaker X6 USB scanner driver"
147
148/* Should we do debugging? */
149
150//#define MTS_DO_DEBUG
151
152/* USB layer driver interface */
153
154static int mts_usb_probe(struct usb_interface *intf,
155 const struct usb_device_id *id);
156static void mts_usb_disconnect(struct usb_interface *intf);
157
158static const struct usb_device_id mts_usb_ids[];
159
160static struct usb_driver mts_usb_driver = {
161 .name = "microtekX6",
162 .probe = mts_usb_probe,
163 .disconnect = mts_usb_disconnect,
164 .id_table = mts_usb_ids,
165};
166
167
168/* Internal driver stuff */
169
170#define MTS_VERSION "0.4.3"
171#define MTS_NAME "microtek usb (rev " MTS_VERSION "): "
172
173#define MTS_WARNING(x...) \
174 printk( KERN_WARNING MTS_NAME x )
175#define MTS_ERROR(x...) \
176 printk( KERN_ERR MTS_NAME x )
177#define MTS_INT_ERROR(x...) \
178 MTS_ERROR(x)
179#define MTS_MESSAGE(x...) \
180 printk( KERN_INFO MTS_NAME x )
181
182#if defined MTS_DO_DEBUG
183
184#define MTS_DEBUG(x...) \
185 printk( KERN_DEBUG MTS_NAME x )
186
187#define MTS_DEBUG_GOT_HERE() \
188 MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __func__ )
189#define MTS_DEBUG_INT() \
190 do { MTS_DEBUG_GOT_HERE(); \
191 MTS_DEBUG("transfer = 0x%x context = 0x%x\n",(int)transfer,(int)context ); \
192 MTS_DEBUG("status = 0x%x data-length = 0x%x sent = 0x%x\n",transfer->status,(int)context->data_length, (int)transfer->actual_length ); \
193 mts_debug_dump(context->instance);\
194 } while(0)
195#else
196
197#define MTS_NUL_STATEMENT do { } while(0)
198
199#define MTS_DEBUG(x...) MTS_NUL_STATEMENT
200#define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT
201#define MTS_DEBUG_INT() MTS_NUL_STATEMENT
202
203#endif
204
205
206
207#define MTS_INT_INIT()\
208 struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context; \
209 MTS_DEBUG_INT();\
210
211#ifdef MTS_DO_DEBUG
212
213static inline void mts_debug_dump(struct mts_desc* desc) {
214 MTS_DEBUG("desc at 0x%x: toggle = %02x%02x\n",
215 (int)desc,
216 (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0]
217 );
218 MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n",
219 usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
220 usb_rcvbulkpipe(desc->usb_dev,desc->ep_response),
221 usb_rcvbulkpipe(desc->usb_dev,desc->ep_image)
222 );
223}
224
225
226static inline void mts_show_command(struct scsi_cmnd *srb)
227{
228 char *what = NULL;
229
230 switch (srb->cmnd[0]) {
231 case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
232 case REZERO_UNIT: what = "REZERO_UNIT"; break;
233 case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
234 case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
235 case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
236 case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
237 case READ_6: what = "READ_6"; break;
238 case WRITE_6: what = "WRITE_6"; break;
239 case SEEK_6: what = "SEEK_6"; break;
240 case READ_REVERSE: what = "READ_REVERSE"; break;
241 case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
242 case SPACE: what = "SPACE"; break;
243 case INQUIRY: what = "INQUIRY"; break;
244 case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
245 case MODE_SELECT: what = "MODE_SELECT"; break;
246 case RESERVE: what = "RESERVE"; break;
247 case RELEASE: what = "RELEASE"; break;
248 case COPY: what = "COPY"; break;
249 case ERASE: what = "ERASE"; break;
250 case MODE_SENSE: what = "MODE_SENSE"; break;
251 case START_STOP: what = "START_STOP"; break;
252 case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
253 case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
254 case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
255 case SET_WINDOW: what = "SET_WINDOW"; break;
256 case READ_CAPACITY: what = "READ_CAPACITY"; break;
257 case READ_10: what = "READ_10"; break;
258 case WRITE_10: what = "WRITE_10"; break;
259 case SEEK_10: what = "SEEK_10"; break;
260 case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
261 case VERIFY: what = "VERIFY"; break;
262 case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
263 case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
264 case SEARCH_LOW: what = "SEARCH_LOW"; break;
265 case SET_LIMITS: what = "SET_LIMITS"; break;
266 case READ_POSITION: what = "READ_POSITION"; break;
267 case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
268 case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
269 case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
270 case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
271 case COMPARE: what = "COMPARE"; break;
272 case COPY_VERIFY: what = "COPY_VERIFY"; break;
273 case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
274 case READ_BUFFER: what = "READ_BUFFER"; break;
275 case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
276 case READ_LONG: what = "READ_LONG"; break;
277 case WRITE_LONG: what = "WRITE_LONG"; break;
278 case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
279 case WRITE_SAME: what = "WRITE_SAME"; break;
280 case READ_TOC: what = "READ_TOC"; break;
281 case LOG_SELECT: what = "LOG_SELECT"; break;
282 case LOG_SENSE: what = "LOG_SENSE"; break;
283 case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
284 case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
285 case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break;
286 case READ_12: what = "READ_12"; break;
287 case WRITE_12: what = "WRITE_12"; break;
288 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
289 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
290 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
291 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
292 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
293 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
294 case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
295 default:
296 MTS_DEBUG("can't decode command\n");
297 goto out;
298 break;
299 }
300 MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len);
301
302 out:
303 MTS_DEBUG( " %10ph\n", srb->cmnd);
304}
305
306#else
307
308static inline void mts_show_command(struct scsi_cmnd * dummy)
309{
310}
311
312static inline void mts_debug_dump(struct mts_desc* dummy)
313{
314}
315
316#endif
317
318static inline void mts_urb_abort(struct mts_desc* desc) {
319 MTS_DEBUG_GOT_HERE();
320 mts_debug_dump(dummy: desc);
321
322 usb_kill_urb( urb: desc->urb );
323}
324
325static int mts_slave_alloc (struct scsi_device *s)
326{
327 s->inquiry_len = 0x24;
328 return 0;
329}
330
331static int mts_slave_configure (struct scsi_device *s)
332{
333 blk_queue_dma_alignment(s->request_queue, (512 - 1));
334 return 0;
335}
336
337static int mts_scsi_abort(struct scsi_cmnd *srb)
338{
339 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
340
341 MTS_DEBUG_GOT_HERE();
342
343 mts_urb_abort(desc);
344
345 return FAILED;
346}
347
348static int mts_scsi_host_reset(struct scsi_cmnd *srb)
349{
350 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
351 int result;
352
353 MTS_DEBUG_GOT_HERE();
354 mts_debug_dump(dummy: desc);
355
356 result = usb_lock_device_for_reset(udev: desc->usb_dev, iface: desc->usb_intf);
357 if (result == 0) {
358 result = usb_reset_device(dev: desc->usb_dev);
359 usb_unlock_device(desc->usb_dev);
360 }
361 return result ? FAILED : SUCCESS;
362}
363
364static int
365mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
366
367static void mts_transfer_cleanup( struct urb *transfer );
368static void mts_do_sg(struct urb * transfer);
369
370static inline
371void mts_int_submit_urb (struct urb* transfer,
372 int pipe,
373 void* data,
374 unsigned length,
375 usb_complete_t callback )
376/* Interrupt context! */
377
378/* Holding transfer->context->lock! */
379{
380 int res;
381
382 MTS_INT_INIT();
383
384 usb_fill_bulk_urb(urb: transfer,
385 dev: context->instance->usb_dev,
386 pipe,
387 transfer_buffer: data,
388 buffer_length: length,
389 complete_fn: callback,
390 context
391 );
392
393 res = usb_submit_urb( urb: transfer, GFP_ATOMIC );
394 if ( unlikely(res) ) {
395 MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res );
396 set_host_byte(cmd: context->srb, status: DID_ERROR);
397 mts_transfer_cleanup(transfer);
398 }
399}
400
401
402static void mts_transfer_cleanup( struct urb *transfer )
403/* Interrupt context! */
404{
405 MTS_INT_INIT();
406
407 if ( likely(context->final_callback != NULL) )
408 context->final_callback(context->srb);
409}
410
411static void mts_transfer_done( struct urb *transfer )
412{
413 MTS_INT_INIT();
414
415 context->srb->result &= MTS_SCSI_ERR_MASK;
416 context->srb->result |= (unsigned)(*context->scsi_status)<<1;
417
418 mts_transfer_cleanup(transfer);
419}
420
421
422static void mts_get_status( struct urb *transfer )
423/* Interrupt context! */
424{
425 MTS_INT_INIT();
426
427 mts_int_submit_urb(transfer,
428 usb_rcvbulkpipe(context->instance->usb_dev,
429 context->instance->ep_response),
430 data: context->scsi_status,
431 length: 1,
432 callback: mts_transfer_done );
433}
434
435static void mts_data_done( struct urb* transfer )
436/* Interrupt context! */
437{
438 int status = transfer->status;
439 MTS_INT_INIT();
440
441 if ( context->data_length != transfer->actual_length ) {
442 scsi_set_resid(cmd: context->srb, resid: context->data_length -
443 transfer->actual_length);
444 } else if ( unlikely(status) ) {
445 set_host_byte(cmd: context->srb, status: (status == -ENOENT ? DID_ABORT : DID_ERROR));
446 }
447
448 mts_get_status(transfer);
449}
450
451
452static void mts_command_done( struct urb *transfer )
453/* Interrupt context! */
454{
455 int status = transfer->status;
456 MTS_INT_INIT();
457
458 if ( unlikely(status) ) {
459 if (status == -ENOENT) {
460 /* We are being killed */
461 MTS_DEBUG_GOT_HERE();
462 set_host_byte(cmd: context->srb, status: DID_ABORT);
463 } else {
464 /* A genuine error has occurred */
465 MTS_DEBUG_GOT_HERE();
466
467 set_host_byte(cmd: context->srb, status: DID_ERROR);
468 }
469 mts_transfer_cleanup(transfer);
470
471 return;
472 }
473
474 if (context->srb->cmnd[0] == REQUEST_SENSE) {
475 mts_int_submit_urb(transfer,
476 pipe: context->data_pipe,
477 data: context->srb->sense_buffer,
478 length: context->data_length,
479 callback: mts_data_done);
480 } else { if ( context->data ) {
481 mts_int_submit_urb(transfer,
482 pipe: context->data_pipe,
483 data: context->data,
484 length: context->data_length,
485 callback: scsi_sg_count(cmd: context->srb) > 1 ?
486 mts_do_sg : mts_data_done);
487 } else {
488 mts_get_status(transfer);
489 }
490 }
491}
492
493static void mts_do_sg (struct urb* transfer)
494{
495 int status = transfer->status;
496 MTS_INT_INIT();
497
498 MTS_DEBUG("Processing fragment %d of %d\n", context->fragment,
499 scsi_sg_count(context->srb));
500
501 if (unlikely(status)) {
502 set_host_byte(cmd: context->srb, status: (status == -ENOENT ? DID_ABORT : DID_ERROR));
503 mts_transfer_cleanup(transfer);
504 }
505
506 context->curr_sg = sg_next(context->curr_sg);
507 mts_int_submit_urb(transfer,
508 pipe: context->data_pipe,
509 data: sg_virt(sg: context->curr_sg),
510 length: context->curr_sg->length,
511 callback: sg_is_last(sg: context->curr_sg) ?
512 mts_data_done : mts_do_sg);
513}
514
515static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 };
516static const u8 mts_read_image_sig_len = 4;
517static const unsigned char mts_direction[256/8] = {
518 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
519 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
520 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
521 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
522};
523
524
525#define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1)
526
527static void
528mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
529{
530 int pipe;
531
532 MTS_DEBUG_GOT_HERE();
533
534 desc->context.instance = desc;
535 desc->context.srb = srb;
536
537 if (!scsi_bufflen(cmd: srb)) {
538 desc->context.data = NULL;
539 desc->context.data_length = 0;
540 return;
541 } else {
542 desc->context.curr_sg = scsi_sglist(cmd: srb);
543 desc->context.data = sg_virt(sg: desc->context.curr_sg);
544 desc->context.data_length = desc->context.curr_sg->length;
545 }
546
547
548 /* can't rely on srb->sc_data_direction */
549
550 /* Brutally ripped from usb-storage */
551
552 if ( !memcmp( p: srb->cmnd, q: mts_read_image_sig, size: mts_read_image_sig_len )
553) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
554 MTS_DEBUG( "transferring from desc->ep_image == %d\n",
555 (int)desc->ep_image );
556 } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
557 pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
558 MTS_DEBUG( "transferring from desc->ep_response == %d\n",
559 (int)desc->ep_response);
560 } else {
561 MTS_DEBUG("transferring to desc->ep_out == %d\n",
562 (int)desc->ep_out);
563 pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
564 }
565 desc->context.data_pipe = pipe;
566}
567
568static int mts_scsi_queuecommand_lck(struct scsi_cmnd *srb)
569{
570 mts_scsi_cmnd_callback callback = scsi_done;
571 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
572 int res;
573
574 MTS_DEBUG_GOT_HERE();
575 mts_show_command(dummy: srb);
576 mts_debug_dump(dummy: desc);
577
578 if ( srb->device->lun || srb->device->id || srb->device->channel ) {
579
580 MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );
581
582 MTS_DEBUG("this device doesn't exist\n");
583
584 set_host_byte(cmd: srb, status: DID_BAD_TARGET);
585
586 if(likely(callback != NULL))
587 callback(srb);
588
589 goto out;
590 }
591
592
593 usb_fill_bulk_urb(urb: desc->urb,
594 dev: desc->usb_dev,
595 usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
596 transfer_buffer: srb->cmnd,
597 buffer_length: srb->cmd_len,
598 complete_fn: mts_command_done,
599 context: &desc->context
600 );
601
602
603 mts_build_transfer_context( srb, desc );
604 desc->context.final_callback = callback;
605
606 /* here we need ATOMIC as we are called with the iolock */
607 res=usb_submit_urb(urb: desc->urb, GFP_ATOMIC);
608
609 if(unlikely(res)){
610 MTS_ERROR("error %d submitting URB\n",(int)res);
611 set_host_byte(cmd: srb, status: DID_ERROR);
612
613 if(likely(callback != NULL))
614 callback(srb);
615
616 }
617out:
618 return 0;
619}
620
621static DEF_SCSI_QCMD(mts_scsi_queuecommand)
622
623static const struct scsi_host_template mts_scsi_host_template = {
624 .module = THIS_MODULE,
625 .name = "microtekX6",
626 .proc_name = "microtekX6",
627 .queuecommand = mts_scsi_queuecommand,
628 .eh_abort_handler = mts_scsi_abort,
629 .eh_host_reset_handler = mts_scsi_host_reset,
630 .sg_tablesize = SG_ALL,
631 .can_queue = 1,
632 .this_id = -1,
633 .emulated = 1,
634 .slave_alloc = mts_slave_alloc,
635 .slave_configure = mts_slave_configure,
636 .max_sectors= 256, /* 128 K */
637};
638
639/* The entries of microtek_table must correspond, line-by-line to
640 the entries of mts_supported_products[]. */
641
642static const struct usb_device_id mts_usb_ids[] =
643{
644 { USB_DEVICE(0x4ce, 0x0300) },
645 { USB_DEVICE(0x5da, 0x0094) },
646 { USB_DEVICE(0x5da, 0x0099) },
647 { USB_DEVICE(0x5da, 0x009a) },
648 { USB_DEVICE(0x5da, 0x00a0) },
649 { USB_DEVICE(0x5da, 0x00a3) },
650 { USB_DEVICE(0x5da, 0x80a3) },
651 { USB_DEVICE(0x5da, 0x80ac) },
652 { USB_DEVICE(0x5da, 0x00b6) },
653 { } /* Terminating entry */
654};
655
656MODULE_DEVICE_TABLE (usb, mts_usb_ids);
657
658
659static int mts_usb_probe(struct usb_interface *intf,
660 const struct usb_device_id *id)
661{
662 int i;
663 int ep_out = -1;
664 int ep_in_set[3]; /* this will break if we have more than three endpoints
665 which is why we check */
666 int *ep_in_current = ep_in_set;
667 int err_retval = -ENOMEM;
668
669 struct mts_desc * new_desc;
670 struct usb_device *dev = interface_to_usbdev (intf);
671
672 /* the current altsetting on the interface we're probing */
673 struct usb_host_interface *altsetting;
674
675 MTS_DEBUG_GOT_HERE();
676 MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
677
678 MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
679 le16_to_cpu(dev->descriptor.idProduct),
680 le16_to_cpu(dev->descriptor.idVendor) );
681
682 MTS_DEBUG_GOT_HERE();
683
684 /* the current altsetting on the interface we're probing */
685 altsetting = intf->cur_altsetting;
686
687
688 /* Check if the config is sane */
689
690 if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
691 MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
692 (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
693 return -ENODEV;
694 }
695
696 for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
697 if ((altsetting->endpoint[i].desc.bmAttributes &
698 USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
699
700 MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
701 (int)altsetting->endpoint[i].desc.bEndpointAddress );
702 } else {
703 if (altsetting->endpoint[i].desc.bEndpointAddress &
704 USB_DIR_IN)
705 *ep_in_current++
706 = altsetting->endpoint[i].desc.bEndpointAddress &
707 USB_ENDPOINT_NUMBER_MASK;
708 else {
709 if ( ep_out != -1 ) {
710 MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
711 return -ENODEV;
712 }
713
714 ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
715 USB_ENDPOINT_NUMBER_MASK;
716 }
717 }
718
719 }
720
721 if (ep_in_current != &ep_in_set[2]) {
722 MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n");
723 return -ENODEV;
724 }
725
726 if ( ep_out == -1 ) {
727 MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
728 return -ENODEV;
729 }
730
731
732 new_desc = kzalloc(size: sizeof(struct mts_desc), GFP_KERNEL);
733 if (!new_desc)
734 goto out;
735
736 new_desc->urb = usb_alloc_urb(iso_packets: 0, GFP_KERNEL);
737 if (!new_desc->urb)
738 goto out_kfree;
739
740 new_desc->context.scsi_status = kmalloc(size: 1, GFP_KERNEL);
741 if (!new_desc->context.scsi_status)
742 goto out_free_urb;
743
744 new_desc->usb_dev = dev;
745 new_desc->usb_intf = intf;
746
747 /* endpoints */
748 new_desc->ep_out = ep_out;
749 new_desc->ep_response = ep_in_set[0];
750 new_desc->ep_image = ep_in_set[1];
751
752 if ( new_desc->ep_out != MTS_EP_OUT )
753 MTS_WARNING( "will this work? Command EP is not usually %d\n",
754 (int)new_desc->ep_out );
755
756 if ( new_desc->ep_response != MTS_EP_RESPONSE )
757 MTS_WARNING( "will this work? Response EP is not usually %d\n",
758 (int)new_desc->ep_response );
759
760 if ( new_desc->ep_image != MTS_EP_IMAGE )
761 MTS_WARNING( "will this work? Image data EP is not usually %d\n",
762 (int)new_desc->ep_image );
763
764 new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
765 sizeof(new_desc));
766 if (!new_desc->host)
767 goto out_kfree2;
768
769 new_desc->host->hostdata[0] = (unsigned long)new_desc;
770 if (scsi_add_host(host: new_desc->host, dev: &dev->dev)) {
771 err_retval = -EIO;
772 goto out_host_put;
773 }
774 scsi_scan_host(new_desc->host);
775
776 usb_set_intfdata(intf, data: new_desc);
777 return 0;
778
779 out_host_put:
780 scsi_host_put(t: new_desc->host);
781 out_kfree2:
782 kfree(objp: new_desc->context.scsi_status);
783 out_free_urb:
784 usb_free_urb(urb: new_desc->urb);
785 out_kfree:
786 kfree(objp: new_desc);
787 out:
788 return err_retval;
789}
790
791static void mts_usb_disconnect (struct usb_interface *intf)
792{
793 struct mts_desc *desc = usb_get_intfdata(intf);
794
795 usb_set_intfdata(intf, NULL);
796
797 usb_kill_urb(urb: desc->urb);
798 scsi_remove_host(desc->host);
799
800 scsi_host_put(t: desc->host);
801 usb_free_urb(urb: desc->urb);
802 kfree(objp: desc->context.scsi_status);
803 kfree(objp: desc);
804}
805
806module_usb_driver(mts_usb_driver);
807
808MODULE_AUTHOR( DRIVER_AUTHOR );
809MODULE_DESCRIPTION( DRIVER_DESC );
810MODULE_LICENSE("GPL");
811

source code of linux/drivers/usb/image/microtek.c