1 | /* SPDX-License-Identifier: GPL-2.0 */ |
2 | #define SUSBCRequest_SetBaudRateParityAndStopBits 1 |
3 | #define SUSBCR_SBR_MASK 0xFF00 |
4 | #define SUSBCR_SBR_1200 0x0100 |
5 | #define SUSBCR_SBR_9600 0x0200 |
6 | #define SUSBCR_SBR_19200 0x0400 |
7 | #define SUSBCR_SBR_28800 0x0800 |
8 | #define SUSBCR_SBR_38400 0x1000 |
9 | #define SUSBCR_SBR_57600 0x2000 |
10 | #define SUSBCR_SBR_115200 0x4000 |
11 | |
12 | #define SUSBCR_SPASB_MASK 0x0070 |
13 | #define SUSBCR_SPASB_NoParity 0x0010 |
14 | #define SUSBCR_SPASB_OddParity 0x0020 |
15 | #define SUSBCR_SPASB_EvenParity 0x0040 |
16 | |
17 | #define SUSBCR_SPASB_STPMASK 0x0003 |
18 | #define SUSBCR_SPASB_1StopBit 0x0001 |
19 | #define SUSBCR_SPASB_2StopBits 0x0002 |
20 | |
21 | #define SUSBCRequest_SetStatusLinesOrQueues 2 |
22 | #define SUSBCR_SSL_SETRTS 0x0001 |
23 | #define SUSBCR_SSL_CLRRTS 0x0002 |
24 | #define SUSBCR_SSL_SETDTR 0x0004 |
25 | #define SUSBCR_SSL_CLRDTR 0x0010 |
26 | |
27 | /* Kill the pending/current writes to the comm port. */ |
28 | #define SUSBCR_SSL_PURGE_TXABORT 0x0100 |
29 | /* Kill the pending/current reads to the comm port. */ |
30 | #define SUSBCR_SSL_PURGE_RXABORT 0x0200 |
31 | /* Kill the transmit queue if there. */ |
32 | #define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 |
33 | /* Kill the typeahead buffer if there. */ |
34 | #define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 |
35 | |
36 | #define SUSBCRequest_GetStatusLineState 4 |
37 | /* Any Character received */ |
38 | #define SUSBCR_GSL_RXCHAR 0x0001 |
39 | /* Transmitt Queue Empty */ |
40 | #define SUSBCR_GSL_TXEMPTY 0x0004 |
41 | /* CTS changed state */ |
42 | #define SUSBCR_GSL_CTS 0x0008 |
43 | /* DSR changed state */ |
44 | #define SUSBCR_GSL_DSR 0x0010 |
45 | /* RLSD changed state */ |
46 | #define SUSBCR_GSL_RLSD 0x0020 |
47 | /* BREAK received */ |
48 | #define SUSBCR_GSL_BREAK 0x0040 |
49 | /* Line status error occurred */ |
50 | #define SUSBCR_GSL_ERR 0x0080 |
51 | /* Ring signal detected */ |
52 | #define SUSBCR_GSL_RING 0x0100 |
53 | |
54 | #define SUSBCRequest_Misc 8 |
55 | /* use a predefined reset sequence */ |
56 | #define SUSBCR_MSC_ResetReader 0x0001 |
57 | /* use a predefined sequence to reset the internal queues */ |
58 | #define SUSBCR_MSC_ResetAllQueues 0x0002 |
59 | |
60 | #define SUSBCRequest_GetMisc 0x10 |
61 | |
62 | /* |
63 | * get the firmware version from device, coded like this 0xHHLLBBPP with |
64 | * HH = Firmware Version High Byte |
65 | * LL = Firmware Version Low Byte |
66 | * BB = Build Number |
67 | * PP = Further Attributes |
68 | */ |
69 | #define SUSBCR_MSC_GetFWVersion 0x0001 |
70 | |
71 | /* |
72 | * get the hardware version from device coded like this 0xHHLLPPRR with |
73 | * HH = Software Version High Byte |
74 | * LL = Software Version Low Byte |
75 | * PP = Further Attributes |
76 | * RR = Reserved for the hardware ID |
77 | */ |
78 | #define SUSBCR_MSC_GetHWVersion 0x0002 |
79 | |