1/*
2 * Register definitions and functions for:
3 * Philips UCB1400 driver
4 *
5 * Based on ucb1400_ts:
6 * Author: Nicolas Pitre
7 * Created: September 25, 2006
8 * Copyright: MontaVista Software, Inc.
9 *
10 * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
11 * If something doesn't work and it worked before spliting, e-mail me,
12 * dont bother Nicolas please ;-)
13 *
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
17 *
18 * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
19 * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
20 * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
21 */
22
23#ifndef _LINUX__UCB1400_H
24#define _LINUX__UCB1400_H
25
26#include <sound/ac97_codec.h>
27#include <linux/mutex.h>
28#include <linux/platform_device.h>
29#include <linux/gpio.h>
30
31/*
32 * UCB1400 AC-link registers
33 */
34
35#define UCB_IO_DATA 0x5a
36#define UCB_IO_DIR 0x5c
37#define UCB_IE_RIS 0x5e
38#define UCB_IE_FAL 0x60
39#define UCB_IE_STATUS 0x62
40#define UCB_IE_CLEAR 0x62
41#define UCB_IE_ADC (1 << 11)
42#define UCB_IE_TSPX (1 << 12)
43
44#define UCB_TS_CR 0x64
45#define UCB_TS_CR_TSMX_POW (1 << 0)
46#define UCB_TS_CR_TSPX_POW (1 << 1)
47#define UCB_TS_CR_TSMY_POW (1 << 2)
48#define UCB_TS_CR_TSPY_POW (1 << 3)
49#define UCB_TS_CR_TSMX_GND (1 << 4)
50#define UCB_TS_CR_TSPX_GND (1 << 5)
51#define UCB_TS_CR_TSMY_GND (1 << 6)
52#define UCB_TS_CR_TSPY_GND (1 << 7)
53#define UCB_TS_CR_MODE_INT (0 << 8)
54#define UCB_TS_CR_MODE_PRES (1 << 8)
55#define UCB_TS_CR_MODE_POS (2 << 8)
56#define UCB_TS_CR_BIAS_ENA (1 << 11)
57#define UCB_TS_CR_TSPX_LOW (1 << 12)
58#define UCB_TS_CR_TSMX_LOW (1 << 13)
59
60#define UCB_ADC_CR 0x66
61#define UCB_ADC_SYNC_ENA (1 << 0)
62#define UCB_ADC_VREFBYP_CON (1 << 1)
63#define UCB_ADC_INP_TSPX (0 << 2)
64#define UCB_ADC_INP_TSMX (1 << 2)
65#define UCB_ADC_INP_TSPY (2 << 2)
66#define UCB_ADC_INP_TSMY (3 << 2)
67#define UCB_ADC_INP_AD0 (4 << 2)
68#define UCB_ADC_INP_AD1 (5 << 2)
69#define UCB_ADC_INP_AD2 (6 << 2)
70#define UCB_ADC_INP_AD3 (7 << 2)
71#define UCB_ADC_EXT_REF (1 << 5)
72#define UCB_ADC_START (1 << 7)
73#define UCB_ADC_ENA (1 << 15)
74
75#define UCB_ADC_DATA 0x68
76#define UCB_ADC_DAT_VALID (1 << 15)
77
78#define UCB_FCSR 0x6c
79#define UCB_FCSR_AVE (1 << 12)
80
81#define UCB_ADC_DAT_MASK 0x3ff
82
83#define UCB_ID 0x7e
84#define UCB_ID_1400 0x4304
85
86struct ucb1400_gpio {
87 struct gpio_chip gc;
88 struct snd_ac97 *ac97;
89 int gpio_offset;
90 int (*gpio_setup)(struct device *dev, int ngpio);
91 int (*gpio_teardown)(struct device *dev, int ngpio);
92};
93
94struct ucb1400_ts {
95 struct input_dev *ts_idev;
96 int id;
97 int irq;
98 struct snd_ac97 *ac97;
99 wait_queue_head_t ts_wait;
100 bool stopped;
101};
102
103struct ucb1400 {
104 struct platform_device *ucb1400_ts;
105 struct platform_device *ucb1400_gpio;
106};
107
108struct ucb1400_pdata {
109 int irq;
110 int gpio_offset;
111 int (*gpio_setup)(struct device *dev, int ngpio);
112 int (*gpio_teardown)(struct device *dev, int ngpio);
113};
114
115static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
116{
117 return ac97->bus->ops->read(ac97, reg);
118}
119
120static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val)
121{
122 ac97->bus->ops->write(ac97, reg, val);
123}
124
125static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio)
126{
127 return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio);
128}
129
130static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio,
131 u16 val)
132{
133 ucb1400_reg_write(ac97, UCB_IO_DATA, val ?
134 ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) :
135 ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio));
136}
137
138static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio)
139{
140 return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio);
141}
142
143static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio,
144 u16 dir)
145{
146 ucb1400_reg_write(ac97, UCB_IO_DIR, dir ?
147 ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) :
148 ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio));
149}
150
151static inline void ucb1400_adc_enable(struct snd_ac97 *ac97)
152{
153 ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA);
154}
155
156static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
157{
158 ucb1400_reg_write(ac97, UCB_ADC_CR, 0);
159}
160
161
162unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
163 int adcsync);
164
165#endif
166