1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2#ifndef _LINUX_HDREG_H
3#define _LINUX_HDREG_H
4
5#include <linux/types.h>
6
7/*
8 * Command Header sizes for IOCTL commands
9 */
10
11#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8))
12#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
13#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
14
15#define IDE_DRIVE_TASK_NO_DATA 0
16#ifndef __KERNEL__
17#define IDE_DRIVE_TASK_INVALID -1
18#define IDE_DRIVE_TASK_SET_XFER 1
19#define IDE_DRIVE_TASK_IN 2
20#define IDE_DRIVE_TASK_OUT 3
21#endif
22#define IDE_DRIVE_TASK_RAW_WRITE 4
23
24/*
25 * Define standard taskfile in/out register
26 */
27#define IDE_TASKFILE_STD_IN_FLAGS 0xFE
28#define IDE_HOB_STD_IN_FLAGS 0x3C
29#ifndef __KERNEL__
30#define IDE_TASKFILE_STD_OUT_FLAGS 0xFE
31#define IDE_HOB_STD_OUT_FLAGS 0x3C
32
33typedef unsigned char task_ioreg_t;
34typedef unsigned long sata_ioreg_t;
35#endif
36
37typedef union ide_reg_valid_s {
38 unsigned all : 16;
39 struct {
40 unsigned data : 1;
41 unsigned error_feature : 1;
42 unsigned sector : 1;
43 unsigned nsector : 1;
44 unsigned lcyl : 1;
45 unsigned hcyl : 1;
46 unsigned select : 1;
47 unsigned status_command : 1;
48
49 unsigned data_hob : 1;
50 unsigned error_feature_hob : 1;
51 unsigned sector_hob : 1;
52 unsigned nsector_hob : 1;
53 unsigned lcyl_hob : 1;
54 unsigned hcyl_hob : 1;
55 unsigned select_hob : 1;
56 unsigned control_hob : 1;
57 } b;
58} ide_reg_valid_t;
59
60typedef struct ide_task_request_s {
61 __u8 io_ports[8];
62 __u8 hob_ports[8]; /* bytes 6 and 7 are unused */
63 ide_reg_valid_t out_flags;
64 ide_reg_valid_t in_flags;
65 int data_phase;
66 int req_cmd;
67 unsigned long out_size;
68 unsigned long in_size;
69} ide_task_request_t;
70
71typedef struct ide_ioctl_request_s {
72 ide_task_request_t *task_request;
73 unsigned char *out_buffer;
74 unsigned char *in_buffer;
75} ide_ioctl_request_t;
76
77struct hd_drive_cmd_hdr {
78 __u8 command;
79 __u8 sector_number;
80 __u8 feature;
81 __u8 sector_count;
82};
83
84#ifndef __KERNEL__
85typedef struct hd_drive_task_hdr {
86 __u8 data;
87 __u8 feature;
88 __u8 sector_count;
89 __u8 sector_number;
90 __u8 low_cylinder;
91 __u8 high_cylinder;
92 __u8 device_head;
93 __u8 command;
94} task_struct_t;
95
96typedef struct hd_drive_hob_hdr {
97 __u8 data;
98 __u8 feature;
99 __u8 sector_count;
100 __u8 sector_number;
101 __u8 low_cylinder;
102 __u8 high_cylinder;
103 __u8 device_head;
104 __u8 control;
105} hob_struct_t;
106#endif
107
108#define TASKFILE_NO_DATA 0x0000
109
110#define TASKFILE_IN 0x0001
111#define TASKFILE_MULTI_IN 0x0002
112
113#define TASKFILE_OUT 0x0004
114#define TASKFILE_MULTI_OUT 0x0008
115#define TASKFILE_IN_OUT 0x0010
116
117#define TASKFILE_IN_DMA 0x0020
118#define TASKFILE_OUT_DMA 0x0040
119#define TASKFILE_IN_DMAQ 0x0080
120#define TASKFILE_OUT_DMAQ 0x0100
121
122#ifndef __KERNEL__
123#define TASKFILE_P_IN 0x0200
124#define TASKFILE_P_OUT 0x0400
125#define TASKFILE_P_IN_DMA 0x0800
126#define TASKFILE_P_OUT_DMA 0x1000
127#define TASKFILE_P_IN_DMAQ 0x2000
128#define TASKFILE_P_OUT_DMAQ 0x4000
129#define TASKFILE_48 0x8000
130#define TASKFILE_INVALID 0x7fff
131#endif
132
133#ifndef __KERNEL__
134/* ATA/ATAPI Commands pre T13 Spec */
135#define WIN_NOP 0x00
136/*
137 * 0x01->0x02 Reserved
138 */
139#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
140/*
141 * 0x04->0x07 Reserved
142 */
143#define WIN_SRST 0x08 /* ATAPI soft reset command */
144#define WIN_DEVICE_RESET 0x08
145/*
146 * 0x09->0x0F Reserved
147 */
148#define WIN_RECAL 0x10
149#define WIN_RESTORE WIN_RECAL
150/*
151 * 0x10->0x1F Reserved
152 */
153#define WIN_READ 0x20 /* 28-Bit */
154#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
155#define WIN_READ_LONG 0x22 /* 28-Bit */
156#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
157#define WIN_READ_EXT 0x24 /* 48-Bit */
158#define WIN_READDMA_EXT 0x25 /* 48-Bit */
159#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
160#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
161/*
162 * 0x28
163 */
164#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
165/*
166 * 0x2A->0x2F Reserved
167 */
168#define WIN_WRITE 0x30 /* 28-Bit */
169#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
170#define WIN_WRITE_LONG 0x32 /* 28-Bit */
171#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
172#define WIN_WRITE_EXT 0x34 /* 48-Bit */
173#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
174#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
175#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
176#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
177#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
178/*
179 * 0x3A->0x3B Reserved
180 */
181#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
182/*
183 * 0x3D->0x3F Reserved
184 */
185#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
186#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
187#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
188/*
189 * 0x43->0x4F Reserved
190 */
191#define WIN_FORMAT 0x50
192/*
193 * 0x51->0x5F Reserved
194 */
195#define WIN_INIT 0x60
196/*
197 * 0x61->0x5F Reserved
198 */
199#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
200
201#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
202#define WIN_DIAGNOSE 0x90
203#define WIN_SPECIFY 0x91 /* set drive geometry translation */
204#define WIN_DOWNLOAD_MICROCODE 0x92
205#define WIN_STANDBYNOW2 0x94
206#define WIN_STANDBY2 0x96
207#define WIN_SETIDLE2 0x97
208#define WIN_CHECKPOWERMODE2 0x98
209#define WIN_SLEEPNOW2 0x99
210/*
211 * 0x9A VENDOR
212 */
213#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
214#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
215#define WIN_QUEUED_SERVICE 0xA2
216#define WIN_SMART 0xB0 /* self-monitoring and reporting */
217#define CFA_ERASE_SECTORS 0xC0
218#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
219#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
220#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
221#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
222#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
223#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
224#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
225#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
226#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
227#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
228#define WIN_GETMEDIASTATUS 0xDA
229#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
230#define WIN_POSTBOOT 0xDC
231#define WIN_PREBOOT 0xDD
232#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
233#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
234#define WIN_STANDBYNOW1 0xE0
235#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
236#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
237#define WIN_SETIDLE1 0xE3
238#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
239#define WIN_CHECKPOWERMODE1 0xE5
240#define WIN_SLEEPNOW1 0xE6
241#define WIN_FLUSH_CACHE 0xE7
242#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
243#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
244 /* SET_FEATURES 0x22 or 0xDD */
245#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
246#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
247#define WIN_MEDIAEJECT 0xED
248#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
249#define WIN_SETFEATURES 0xEF /* set special drive features */
250#define EXABYTE_ENABLE_NEST 0xF0
251#define WIN_SECURITY_SET_PASS 0xF1
252#define WIN_SECURITY_UNLOCK 0xF2
253#define WIN_SECURITY_ERASE_PREPARE 0xF3
254#define WIN_SECURITY_ERASE_UNIT 0xF4
255#define WIN_SECURITY_FREEZE_LOCK 0xF5
256#define WIN_SECURITY_DISABLE 0xF6
257#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
258#define WIN_SET_MAX 0xF9
259#define DISABLE_SEAGATE 0xFB
260
261/* WIN_SMART sub-commands */
262
263#define SMART_READ_VALUES 0xD0
264#define SMART_READ_THRESHOLDS 0xD1
265#define SMART_AUTOSAVE 0xD2
266#define SMART_SAVE 0xD3
267#define SMART_IMMEDIATE_OFFLINE 0xD4
268#define SMART_READ_LOG_SECTOR 0xD5
269#define SMART_WRITE_LOG_SECTOR 0xD6
270#define SMART_WRITE_THRESHOLDS 0xD7
271#define SMART_ENABLE 0xD8
272#define SMART_DISABLE 0xD9
273#define SMART_STATUS 0xDA
274#define SMART_AUTO_OFFLINE 0xDB
275
276/* Password used in TF4 & TF5 executing SMART commands */
277
278#define SMART_LCYL_PASS 0x4F
279#define SMART_HCYL_PASS 0xC2
280
281/* WIN_SETFEATURES sub-commands */
282#define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */
283#define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */
284#define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */
285#define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */
286#define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */
287#define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */
288#define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */
289#define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */
290#define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */
291#define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */
292#define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */
293#define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */
294#define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */
295#define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */
296#define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */
297#define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */
298#define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */
299#define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */
300#define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */
301#define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */
302#define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */
303#define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */
304#define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
305#define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
306#define SETFEATURES_EN_REST 0xAC /* ATA-1 */
307#define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */
308#define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
309#define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
310#define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
311#define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */
312#define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */
313
314/* WIN_SECURITY sub-commands */
315
316#define SECURITY_SET_PASSWORD 0xBA
317#define SECURITY_UNLOCK 0xBB
318#define SECURITY_ERASE_PREPARE 0xBC
319#define SECURITY_ERASE_UNIT 0xBD
320#define SECURITY_FREEZE_LOCK 0xBE
321#define SECURITY_DISABLE_PASSWORD 0xBF
322#endif /* __KERNEL__ */
323
324struct hd_geometry {
325 unsigned char heads;
326 unsigned char sectors;
327 unsigned short cylinders;
328 unsigned long start;
329};
330
331/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
332#define HDIO_GETGEO 0x0301 /* get device geometry */
333#define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
334#define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
335#define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */
336
337#define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */
338
339#define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */
340#define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
341#define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
342#define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
343#define HDIO_GET_DMA 0x030b /* get use-dma flag */
344#define HDIO_GET_NICE 0x030c /* get nice flags */
345#define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
346#define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */
347#define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */
348#define HDIO_GET_ADDRESS 0x0310 /* */
349
350#define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */
351#define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */
352#define HDIO_DRIVE_RESET 0x031c /* execute a device reset */
353#define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */
354#define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */
355#define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
356#define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
357
358/* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
359#define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
360#define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
361#define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
362#define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
363#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
364#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
365#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
366#ifndef __KERNEL__
367#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
368#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
369#endif
370#define HDIO_SET_NICE 0x0329 /* set nice flags */
371#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
372#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
373#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
374#define HDIO_SET_QDMA 0x032e /* change use-qdma flag */
375#define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */
376
377/* bus states */
378enum {
379 BUSSTATE_OFF = 0,
380 BUSSTATE_ON,
381 BUSSTATE_TRISTATE
382};
383
384/* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
385/* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
386/* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
387/* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
388/* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
389
390#define __NEW_HD_DRIVE_ID
391
392#ifndef __KERNEL__
393/*
394 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
395 *
396 * If you change something here, please remember to update fix_driveid() in
397 * ide/probe.c.
398 */
399struct hd_driveid {
400 unsigned short config; /* lots of obsolete bit flags */
401 unsigned short cyls; /* Obsolete, "physical" cyls */
402 unsigned short reserved2; /* reserved (word 2) */
403 unsigned short heads; /* Obsolete, "physical" heads */
404 unsigned short track_bytes; /* unformatted bytes per track */
405 unsigned short sector_bytes; /* unformatted bytes per sector */
406 unsigned short sectors; /* Obsolete, "physical" sectors per track */
407 unsigned short vendor0; /* vendor unique */
408 unsigned short vendor1; /* vendor unique */
409 unsigned short vendor2; /* Retired vendor unique */
410 unsigned char serial_no[20]; /* 0 = not_specified */
411 unsigned short buf_type; /* Retired */
412 unsigned short buf_size; /* Retired, 512 byte increments
413 * 0 = not_specified
414 */
415 unsigned short ecc_bytes; /* for r/w long cmds; 0 = not_specified */
416 unsigned char fw_rev[8]; /* 0 = not_specified */
417 unsigned char model[40]; /* 0 = not_specified */
418 unsigned char max_multsect; /* 0=not_implemented */
419 unsigned char vendor3; /* vendor unique */
420 unsigned short dword_io; /* 0=not_implemented; 1=implemented */
421 unsigned char vendor4; /* vendor unique */
422 unsigned char capability; /* (upper byte of word 49)
423 * 3: IORDYsup
424 * 2: IORDYsw
425 * 1: LBA
426 * 0: DMA
427 */
428 unsigned short reserved50; /* reserved (word 50) */
429 unsigned char vendor5; /* Obsolete, vendor unique */
430 unsigned char tPIO; /* Obsolete, 0=slow, 1=medium, 2=fast */
431 unsigned char vendor6; /* Obsolete, vendor unique */
432 unsigned char tDMA; /* Obsolete, 0=slow, 1=medium, 2=fast */
433 unsigned short field_valid; /* (word 53)
434 * 2: ultra_ok word 88
435 * 1: eide_ok words 64-70
436 * 0: cur_ok words 54-58
437 */
438 unsigned short cur_cyls; /* Obsolete, logical cylinders */
439 unsigned short cur_heads; /* Obsolete, l heads */
440 unsigned short cur_sectors; /* Obsolete, l sectors per track */
441 unsigned short cur_capacity0; /* Obsolete, l total sectors on drive */
442 unsigned short cur_capacity1; /* Obsolete, (2 words, misaligned int) */
443 unsigned char multsect; /* current multiple sector count */
444 unsigned char multsect_valid; /* when (bit0==1) multsect is ok */
445 unsigned int lba_capacity; /* Obsolete, total number of sectors */
446 unsigned short dma_1word; /* Obsolete, single-word dma info */
447 unsigned short dma_mword; /* multiple-word dma info */
448 unsigned short eide_pio_modes; /* bits 0:mode3 1:mode4 */
449 unsigned short eide_dma_min; /* min mword dma cycle time (ns) */
450 unsigned short eide_dma_time; /* recommended mword dma cycle time (ns) */
451 unsigned short eide_pio; /* min cycle time (ns), no IORDY */
452 unsigned short eide_pio_iordy; /* min cycle time (ns), with IORDY */
453 unsigned short words69_70[2]; /* reserved words 69-70
454 * future command overlap and queuing
455 */
456 unsigned short words71_74[4]; /* reserved words 71-74
457 * for IDENTIFY PACKET DEVICE command
458 */
459 unsigned short queue_depth; /* (word 75)
460 * 15:5 reserved
461 * 4:0 Maximum queue depth -1
462 */
463 unsigned short words76_79[4]; /* reserved words 76-79 */
464 unsigned short major_rev_num; /* (word 80) */
465 unsigned short minor_rev_num; /* (word 81) */
466 unsigned short command_set_1; /* (word 82) supported
467 * 15: Obsolete
468 * 14: NOP command
469 * 13: READ_BUFFER
470 * 12: WRITE_BUFFER
471 * 11: Obsolete
472 * 10: Host Protected Area
473 * 9: DEVICE Reset
474 * 8: SERVICE Interrupt
475 * 7: Release Interrupt
476 * 6: look-ahead
477 * 5: write cache
478 * 4: PACKET Command
479 * 3: Power Management Feature Set
480 * 2: Removable Feature Set
481 * 1: Security Feature Set
482 * 0: SMART Feature Set
483 */
484 unsigned short command_set_2; /* (word 83)
485 * 15: Shall be ZERO
486 * 14: Shall be ONE
487 * 13: FLUSH CACHE EXT
488 * 12: FLUSH CACHE
489 * 11: Device Configuration Overlay
490 * 10: 48-bit Address Feature Set
491 * 9: Automatic Acoustic Management
492 * 8: SET MAX security
493 * 7: reserved 1407DT PARTIES
494 * 6: SetF sub-command Power-Up
495 * 5: Power-Up in Standby Feature Set
496 * 4: Removable Media Notification
497 * 3: APM Feature Set
498 * 2: CFA Feature Set
499 * 1: READ/WRITE DMA QUEUED
500 * 0: Download MicroCode
501 */
502 unsigned short cfsse; /* (word 84)
503 * cmd set-feature supported extensions
504 * 15: Shall be ZERO
505 * 14: Shall be ONE
506 * 13:6 reserved
507 * 5: General Purpose Logging
508 * 4: Streaming Feature Set
509 * 3: Media Card Pass Through
510 * 2: Media Serial Number Valid
511 * 1: SMART selt-test supported
512 * 0: SMART error logging
513 */
514 unsigned short cfs_enable_1; /* (word 85)
515 * command set-feature enabled
516 * 15: Obsolete
517 * 14: NOP command
518 * 13: READ_BUFFER
519 * 12: WRITE_BUFFER
520 * 11: Obsolete
521 * 10: Host Protected Area
522 * 9: DEVICE Reset
523 * 8: SERVICE Interrupt
524 * 7: Release Interrupt
525 * 6: look-ahead
526 * 5: write cache
527 * 4: PACKET Command
528 * 3: Power Management Feature Set
529 * 2: Removable Feature Set
530 * 1: Security Feature Set
531 * 0: SMART Feature Set
532 */
533 unsigned short cfs_enable_2; /* (word 86)
534 * command set-feature enabled
535 * 15: Shall be ZERO
536 * 14: Shall be ONE
537 * 13: FLUSH CACHE EXT
538 * 12: FLUSH CACHE
539 * 11: Device Configuration Overlay
540 * 10: 48-bit Address Feature Set
541 * 9: Automatic Acoustic Management
542 * 8: SET MAX security
543 * 7: reserved 1407DT PARTIES
544 * 6: SetF sub-command Power-Up
545 * 5: Power-Up in Standby Feature Set
546 * 4: Removable Media Notification
547 * 3: APM Feature Set
548 * 2: CFA Feature Set
549 * 1: READ/WRITE DMA QUEUED
550 * 0: Download MicroCode
551 */
552 unsigned short csf_default; /* (word 87)
553 * command set-feature default
554 * 15: Shall be ZERO
555 * 14: Shall be ONE
556 * 13:6 reserved
557 * 5: General Purpose Logging enabled
558 * 4: Valid CONFIGURE STREAM executed
559 * 3: Media Card Pass Through enabled
560 * 2: Media Serial Number Valid
561 * 1: SMART selt-test supported
562 * 0: SMART error logging
563 */
564 unsigned short dma_ultra; /* (word 88) */
565 unsigned short trseuc; /* time required for security erase */
566 unsigned short trsEuc; /* time required for enhanced erase */
567 unsigned short CurAPMvalues; /* current APM values */
568 unsigned short mprc; /* master password revision code */
569 unsigned short hw_config; /* hardware config (word 93)
570 * 15: Shall be ZERO
571 * 14: Shall be ONE
572 * 13:
573 * 12:
574 * 11:
575 * 10:
576 * 9:
577 * 8:
578 * 7:
579 * 6:
580 * 5:
581 * 4:
582 * 3:
583 * 2:
584 * 1:
585 * 0: Shall be ONE
586 */
587 unsigned short acoustic; /* (word 94)
588 * 15:8 Vendor's recommended value
589 * 7:0 current value
590 */
591 unsigned short msrqs; /* min stream request size */
592 unsigned short sxfert; /* stream transfer time */
593 unsigned short sal; /* stream access latency */
594 unsigned int spg; /* stream performance granularity */
595 unsigned long long lba_capacity_2;/* 48-bit total number of sectors */
596 unsigned short words104_125[22];/* reserved words 104-125 */
597 unsigned short last_lun; /* (word 126) */
598 unsigned short word127; /* (word 127) Feature Set
599 * Removable Media Notification
600 * 15:2 reserved
601 * 1:0 00 = not supported
602 * 01 = supported
603 * 10 = reserved
604 * 11 = reserved
605 */
606 unsigned short dlf; /* (word 128)
607 * device lock function
608 * 15:9 reserved
609 * 8 security level 1:max 0:high
610 * 7:6 reserved
611 * 5 enhanced erase
612 * 4 expire
613 * 3 frozen
614 * 2 locked
615 * 1 en/disabled
616 * 0 capability
617 */
618 unsigned short csfo; /* (word 129)
619 * current set features options
620 * 15:4 reserved
621 * 3: auto reassign
622 * 2: reverting
623 * 1: read-look-ahead
624 * 0: write cache
625 */
626 unsigned short words130_155[26];/* reserved vendor words 130-155 */
627 unsigned short word156; /* reserved vendor word 156 */
628 unsigned short words157_159[3];/* reserved vendor words 157-159 */
629 unsigned short cfa_power; /* (word 160) CFA Power Mode
630 * 15 word 160 supported
631 * 14 reserved
632 * 13
633 * 12
634 * 11:0
635 */
636 unsigned short words161_175[15];/* Reserved for CFA */
637 unsigned short words176_205[30];/* Current Media Serial Number */
638 unsigned short words206_254[49];/* reserved words 206-254 */
639 unsigned short integrity_word; /* (word 255)
640 * 15:8 Checksum
641 * 7:0 Signature
642 */
643};
644#endif /* __KERNEL__ */
645
646/*
647 * IDE "nice" flags. These are used on a per drive basis to determine
648 * when to be nice and give more bandwidth to the other devices which
649 * share the same IDE bus.
650 */
651#define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
652#define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
653#define IDE_NICE_1 (3) /* when probably won't affect us much */
654#ifndef __KERNEL__
655#define IDE_NICE_0 (2) /* when sure that it won't affect us */
656#define IDE_NICE_2 (4) /* when we know it's on our expense */
657#endif
658
659#endif /* _LINUX_HDREG_H */
660

source code of linux/include/uapi/linux/hdreg.h