1 | /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ |
2 | /* |
3 | * ipmi_smi.h |
4 | * |
5 | * MontaVista IPMI system management interface |
6 | * |
7 | * Author: MontaVista Software, Inc. |
8 | * Corey Minyard <minyard@mvista.com> |
9 | * source@mvista.com |
10 | * |
11 | * Copyright 2002 MontaVista Software Inc. |
12 | * |
13 | */ |
14 | |
15 | #ifndef __LINUX_IPMI_MSGDEFS_H |
16 | #define __LINUX_IPMI_MSGDEFS_H |
17 | |
18 | /* Various definitions for IPMI messages used by almost everything in |
19 | the IPMI stack. */ |
20 | |
21 | /* NetFNs and commands used inside the IPMI stack. */ |
22 | |
23 | #define IPMI_NETFN_SENSOR_EVENT_REQUEST 0x04 |
24 | #define IPMI_NETFN_SENSOR_EVENT_RESPONSE 0x05 |
25 | #define IPMI_GET_EVENT_RECEIVER_CMD 0x01 |
26 | |
27 | #define IPMI_NETFN_APP_REQUEST 0x06 |
28 | #define IPMI_NETFN_APP_RESPONSE 0x07 |
29 | #define IPMI_GET_DEVICE_ID_CMD 0x01 |
30 | #define IPMI_COLD_RESET_CMD 0x02 |
31 | #define IPMI_WARM_RESET_CMD 0x03 |
32 | #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 |
33 | #define IPMI_GET_DEVICE_GUID_CMD 0x08 |
34 | #define IPMI_GET_MSG_FLAGS_CMD 0x31 |
35 | #define IPMI_SEND_MSG_CMD 0x34 |
36 | #define IPMI_GET_MSG_CMD 0x33 |
37 | #define IPMI_SET_BMC_GLOBAL_ENABLES_CMD 0x2e |
38 | #define IPMI_GET_BMC_GLOBAL_ENABLES_CMD 0x2f |
39 | #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 |
40 | #define IPMI_GET_CHANNEL_INFO_CMD 0x42 |
41 | |
42 | /* Bit for BMC global enables. */ |
43 | #define IPMI_BMC_RCV_MSG_INTR 0x01 |
44 | #define IPMI_BMC_EVT_MSG_INTR 0x02 |
45 | #define IPMI_BMC_EVT_MSG_BUFF 0x04 |
46 | #define IPMI_BMC_SYS_LOG 0x08 |
47 | |
48 | #define IPMI_NETFN_STORAGE_REQUEST 0x0a |
49 | #define IPMI_NETFN_STORAGE_RESPONSE 0x0b |
50 | #define IPMI_ADD_SEL_ENTRY_CMD 0x44 |
51 | |
52 | #define IPMI_NETFN_FIRMWARE_REQUEST 0x08 |
53 | #define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 |
54 | |
55 | /* The default slave address */ |
56 | #define IPMI_BMC_SLAVE_ADDR 0x20 |
57 | |
58 | /* The BT interface on high-end HP systems supports up to 255 bytes in |
59 | * one transfer. Its "virtual" BMC supports some commands that are longer |
60 | * than 128 bytes. Use the full 256, plus NetFn/LUN, Cmd, cCode, plus |
61 | * some overhead; it's not worth the effort to dynamically size this based |
62 | * on the results of the "Get BT Capabilities" command. */ |
63 | #define IPMI_MAX_MSG_LENGTH 272 /* multiple of 16 */ |
64 | |
65 | #define IPMI_CC_NO_ERROR 0x00 |
66 | #define IPMI_NODE_BUSY_ERR 0xc0 |
67 | #define IPMI_INVALID_COMMAND_ERR 0xc1 |
68 | #define IPMI_TIMEOUT_ERR 0xc3 |
69 | #define IPMI_ERR_MSG_TRUNCATED 0xc6 |
70 | #define IPMI_REQ_LEN_INVALID_ERR 0xc7 |
71 | #define IPMI_REQ_LEN_EXCEEDED_ERR 0xc8 |
72 | #define IPMI_DEVICE_IN_FW_UPDATE_ERR 0xd1 |
73 | #define IPMI_DEVICE_IN_INIT_ERR 0xd2 |
74 | #define IPMI_NOT_IN_MY_STATE_ERR 0xd5 /* IPMI 2.0 */ |
75 | #define IPMI_LOST_ARBITRATION_ERR 0x81 |
76 | #define IPMI_BUS_ERR 0x82 |
77 | #define IPMI_NAK_ON_WRITE_ERR 0x83 |
78 | #define IPMI_ERR_UNSPECIFIED 0xff |
79 | |
80 | #define IPMI_CHANNEL_PROTOCOL_IPMB 1 |
81 | #define IPMI_CHANNEL_PROTOCOL_ICMB 2 |
82 | #define IPMI_CHANNEL_PROTOCOL_SMBUS 4 |
83 | #define IPMI_CHANNEL_PROTOCOL_KCS 5 |
84 | #define IPMI_CHANNEL_PROTOCOL_SMIC 6 |
85 | #define IPMI_CHANNEL_PROTOCOL_BT10 7 |
86 | #define IPMI_CHANNEL_PROTOCOL_BT15 8 |
87 | #define IPMI_CHANNEL_PROTOCOL_TMODE 9 |
88 | |
89 | #define IPMI_CHANNEL_MEDIUM_IPMB 1 |
90 | #define IPMI_CHANNEL_MEDIUM_ICMB10 2 |
91 | #define IPMI_CHANNEL_MEDIUM_ICMB09 3 |
92 | #define IPMI_CHANNEL_MEDIUM_8023LAN 4 |
93 | #define IPMI_CHANNEL_MEDIUM_ASYNC 5 |
94 | #define IPMI_CHANNEL_MEDIUM_OTHER_LAN 6 |
95 | #define IPMI_CHANNEL_MEDIUM_PCI_SMBUS 7 |
96 | #define IPMI_CHANNEL_MEDIUM_SMBUS1 8 |
97 | #define IPMI_CHANNEL_MEDIUM_SMBUS2 9 |
98 | #define IPMI_CHANNEL_MEDIUM_USB1 10 |
99 | #define IPMI_CHANNEL_MEDIUM_USB2 11 |
100 | #define IPMI_CHANNEL_MEDIUM_SYSINTF 12 |
101 | #define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 |
102 | #define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f |
103 | |
104 | #endif /* __LINUX_IPMI_MSGDEFS_H */ |
105 | |