1/*
2 * linux/arch/arm/mach-omap1/irq.c
3 *
4 * Interrupt handler for all OMAP boards
5 *
6 * Copyright (C) 2004 Nokia Corporation
7 * Written by Tony Lindgren <tony@atomide.com>
8 * Major cleanups by Juha Yrjölä <juha.yrjola@nokia.com>
9 *
10 * Completely re-written to support various OMAP chips with bank specific
11 * interrupt handlers.
12 *
13 * Some snippets of the code taken from the older OMAP interrupt handler
14 * Copyright (C) 2001 RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
15 *
16 * GPIO interrupt handler moved to gpio.c by Juha Yrjola
17 *
18 * This program is free software; you can redistribute it and/or modify it
19 * under the terms of the GNU General Public License as published by the
20 * Free Software Foundation; either version 2 of the License, or (at your
21 * option) any later version.
22 *
23 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
24 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
25 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
26 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
29 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
30 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 *
34 * You should have received a copy of the GNU General Public License along
35 * with this program; if not, write to the Free Software Foundation, Inc.,
36 * 675 Mass Ave, Cambridge, MA 02139, USA.
37 */
38#include <linux/init.h>
39#include <linux/irq.h>
40#include <linux/module.h>
41#include <linux/sched.h>
42#include <linux/interrupt.h>
43#include <linux/io.h>
44#include <linux/irqdomain.h>
45
46#include <asm/irq.h>
47#include <asm/exception.h>
48#include <asm/mach/irq.h>
49
50#include "soc.h"
51#include "hardware.h"
52#include "common.h"
53
54#define IRQ_BANK(irq) ((irq) >> 5)
55#define IRQ_BIT(irq) ((irq) & 0x1f)
56
57struct omap_irq_bank {
58 unsigned long base_reg;
59 void __iomem *va;
60 unsigned long trigger_map;
61 unsigned long wake_enable;
62};
63
64static u32 omap_l2_irq;
65static unsigned int irq_bank_count;
66static struct omap_irq_bank *irq_banks;
67static struct irq_domain *domain;
68
69static inline unsigned int irq_bank_readl(int bank, int offset)
70{
71 return readl_relaxed(irq_banks[bank].va + offset);
72}
73static inline void irq_bank_writel(unsigned long value, int bank, int offset)
74{
75 writel_relaxed(value, irq_banks[bank].va + offset);
76}
77
78static void omap_ack_irq(int irq)
79{
80 if (irq > 31)
81 writel_relaxed(0x1, irq_banks[1].va + IRQ_CONTROL_REG_OFFSET);
82
83 writel_relaxed(0x1, irq_banks[0].va + IRQ_CONTROL_REG_OFFSET);
84}
85
86static void omap_mask_ack_irq(struct irq_data *d)
87{
88 struct irq_chip_type *ct = irq_data_get_chip_type(d);
89
90 ct->chip.irq_mask(d);
91 omap_ack_irq(irq: d->irq);
92}
93
94/*
95 * Allows tuning the IRQ type and priority
96 *
97 * NOTE: There is currently no OMAP fiq handler for Linux. Read the
98 * mailing list threads on FIQ handlers if you are planning to
99 * add a FIQ handler for OMAP.
100 */
101static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
102{
103 signed int bank;
104 unsigned long val, offset;
105
106 bank = IRQ_BANK(irq);
107 /* FIQ is only available on bank 0 interrupts */
108 fiq = bank ? 0 : (fiq & 0x1);
109 val = fiq | ((priority & 0x1f) << 2) | ((trigger & 0x1) << 1);
110 offset = IRQ_ILR0_REG_OFFSET + IRQ_BIT(irq) * 0x4;
111 irq_bank_writel(value: val, bank, offset);
112}
113
114#ifdef CONFIG_ARCH_OMAP15XX
115static struct omap_irq_bank omap1510_irq_banks[] = {
116 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff },
117 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xffbfffed },
118};
119static struct omap_irq_bank omap310_irq_banks[] = {
120 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3faefc3 },
121 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0x65b3c061 },
122};
123#endif
124
125#if defined(CONFIG_ARCH_OMAP16XX)
126
127static struct omap_irq_bank omap1610_irq_banks[] = {
128 { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3fefe8f },
129 { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb7c1fd },
130 { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0xffffb7ff },
131 { .base_reg = OMAP_IH2_BASE + 0x200, .trigger_map = 0xffffffff },
132};
133#endif
134
135asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs)
136{
137 void __iomem *l1 = irq_banks[0].va;
138 void __iomem *l2 = irq_banks[1].va;
139 u32 irqnr;
140
141 do {
142 irqnr = readl_relaxed(l1 + IRQ_ITR_REG_OFFSET);
143 irqnr &= ~(readl_relaxed(l1 + IRQ_MIR_REG_OFFSET) & 0xffffffff);
144 if (!irqnr)
145 break;
146
147 irqnr = readl_relaxed(l1 + IRQ_SIR_FIQ_REG_OFFSET);
148 if (irqnr)
149 goto irq;
150
151 irqnr = readl_relaxed(l1 + IRQ_SIR_IRQ_REG_OFFSET);
152 if (irqnr == omap_l2_irq) {
153 irqnr = readl_relaxed(l2 + IRQ_SIR_IRQ_REG_OFFSET);
154 if (irqnr)
155 irqnr += 32;
156 }
157irq:
158 if (irqnr)
159 generic_handle_domain_irq(domain, irqnr);
160 else
161 break;
162 } while (irqnr);
163}
164
165static __init void
166omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
167{
168 struct irq_chip_generic *gc;
169 struct irq_chip_type *ct;
170
171 gc = irq_alloc_generic_chip(name: "MPU", nr_ct: 1, irq_base: irq_start, reg_base: base,
172 handler: handle_level_irq);
173 ct = gc->chip_types;
174 ct->chip.irq_ack = omap_mask_ack_irq;
175 ct->chip.irq_mask = irq_gc_mask_set_bit;
176 ct->chip.irq_unmask = irq_gc_mask_clr_bit;
177 ct->chip.irq_set_wake = irq_gc_set_wake;
178 ct->regs.mask = IRQ_MIR_REG_OFFSET;
179 irq_setup_generic_chip(gc, IRQ_MSK(num), flags: IRQ_GC_INIT_MASK_CACHE,
180 clr: IRQ_NOREQUEST | IRQ_NOPROBE, set: 0);
181}
182
183void __init omap1_init_irq(void)
184{
185 struct irq_chip_type *ct;
186 struct irq_data *d = NULL;
187 int i, j, irq_base;
188 unsigned long nr_irqs;
189
190#ifdef CONFIG_ARCH_OMAP15XX
191 if (cpu_is_omap1510()) {
192 irq_banks = omap1510_irq_banks;
193 irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
194 }
195 if (cpu_is_omap310()) {
196 irq_banks = omap310_irq_banks;
197 irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
198 }
199#endif
200#if defined(CONFIG_ARCH_OMAP16XX)
201 if (cpu_is_omap16xx()) {
202 irq_banks = omap1610_irq_banks;
203 irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
204 }
205#endif
206
207 for (i = 0; i < irq_bank_count; i++) {
208 irq_banks[i].va = ioremap(offset: irq_banks[i].base_reg, size: 0xff);
209 if (WARN_ON(!irq_banks[i].va))
210 return;
211 }
212
213 nr_irqs = irq_bank_count * 32;
214
215 irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0);
216 if (irq_base < 0) {
217 pr_warn("Couldn't allocate IRQ numbers\n");
218 irq_base = 0;
219 }
220 omap_l2_irq = irq_base;
221 omap_l2_irq -= NR_IRQS_LEGACY;
222
223 domain = irq_domain_add_legacy(NULL, size: nr_irqs, first_irq: irq_base, first_hwirq: 0,
224 ops: &irq_domain_simple_ops, NULL);
225
226 pr_info("Total of %lu interrupts in %i interrupt banks\n",
227 nr_irqs, irq_bank_count);
228
229 /* Mask and clear all interrupts */
230 for (i = 0; i < irq_bank_count; i++) {
231 irq_bank_writel(value: ~0x0, bank: i, offset: IRQ_MIR_REG_OFFSET);
232 irq_bank_writel(value: 0x0, bank: i, offset: IRQ_ITR_REG_OFFSET);
233 }
234
235 /* Clear any pending interrupts */
236 irq_bank_writel(value: 0x03, bank: 0, offset: IRQ_CONTROL_REG_OFFSET);
237 irq_bank_writel(value: 0x03, bank: 1, offset: IRQ_CONTROL_REG_OFFSET);
238
239 /* Install the interrupt handlers for each bank */
240 for (i = 0; i < irq_bank_count; i++) {
241 for (j = i * 32; j < (i + 1) * 32; j++) {
242 int irq_trigger;
243
244 irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j);
245 omap_irq_set_cfg(irq: j, fiq: 0, priority: 0, trigger: irq_trigger);
246 irq_clear_status_flags(irq: j, clr: IRQ_NOREQUEST);
247 }
248 omap_alloc_gc(base: irq_banks[i].va, irq_start: irq_base + i * 32, num: 32);
249 }
250
251 /* Unmask level 2 handler */
252 d = irq_get_irq_data(irq: irq_find_mapping(domain, hwirq: omap_l2_irq));
253 if (d) {
254 ct = irq_data_get_chip_type(d);
255 ct->chip.irq_unmask(d);
256 }
257
258 set_handle_irq(omap1_handle_irq);
259}
260

source code of linux/arch/arm/mach-omap1/irq.c