1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License. See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7 */
8
9#include <linux/init.h>
10#include <linux/kernel.h>
11#include <linux/delay.h>
12#include <linux/memblock.h>
13#include <linux/ioport.h>
14#include <linux/pm.h>
15#include <asm/bootinfo.h>
16#include <asm/time.h>
17#include <asm/reboot.h>
18#include <asm/cacheflush.h>
19#include <bcm63xx_board.h>
20#include <bcm63xx_cpu.h>
21#include <bcm63xx_regs.h>
22#include <bcm63xx_io.h>
23#include <bcm63xx_gpio.h>
24
25void bcm63xx_machine_halt(void)
26{
27 pr_info("System halted\n");
28 while (1)
29 ;
30}
31
32static void bcm6348_a1_reboot(void)
33{
34 u32 reg;
35
36 /* soft reset all blocks */
37 pr_info("soft-resetting all blocks ...\n");
38 reg = bcm_perf_readl(PERF_SOFTRESET_REG);
39 reg &= ~SOFTRESET_6348_ALL;
40 bcm_perf_writel(reg, PERF_SOFTRESET_REG);
41 mdelay(10);
42
43 reg = bcm_perf_readl(PERF_SOFTRESET_REG);
44 reg |= SOFTRESET_6348_ALL;
45 bcm_perf_writel(reg, PERF_SOFTRESET_REG);
46 mdelay(10);
47
48 /* Jump to the power on address. */
49 pr_info("jumping to reset vector.\n");
50 /* set high vectors (base at 0xbfc00000 */
51 set_c0_status(ST0_BEV | ST0_ERL);
52 /* run uncached in kseg0 */
53 change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
54 __flush_cache_all();
55 /* remove all wired TLB entries */
56 write_c0_wired(0);
57 __asm__ __volatile__(
58 "jr\t%0"
59 :
60 : "r" (0xbfc00000));
61 while (1)
62 ;
63}
64
65void bcm63xx_machine_reboot(void)
66{
67 u32 reg, perf_regs[2] = { 0, 0 };
68 unsigned int i;
69
70 /* mask and clear all external irq */
71 switch (bcm63xx_get_cpu_id()) {
72 case BCM3368_CPU_ID:
73 perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
74 break;
75 case BCM6328_CPU_ID:
76 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
77 break;
78 case BCM6338_CPU_ID:
79 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
80 break;
81 case BCM6345_CPU_ID:
82 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6345;
83 break;
84 case BCM6348_CPU_ID:
85 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348;
86 break;
87 case BCM6358_CPU_ID:
88 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
89 break;
90 case BCM6362_CPU_ID:
91 perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
92 break;
93 }
94
95 for (i = 0; i < 2; i++) {
96 if (!perf_regs[i])
97 break;
98
99 reg = bcm_perf_readl(perf_regs[i]);
100 if (BCMCPU_IS_6348()) {
101 reg &= ~EXTIRQ_CFG_MASK_ALL_6348;
102 reg |= EXTIRQ_CFG_CLEAR_ALL_6348;
103 } else {
104 reg &= ~EXTIRQ_CFG_MASK_ALL;
105 reg |= EXTIRQ_CFG_CLEAR_ALL;
106 }
107 bcm_perf_writel(reg, perf_regs[i]);
108 }
109
110 if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
111 bcm6348_a1_reboot();
112
113 pr_info("triggering watchdog soft-reset...\n");
114 if (BCMCPU_IS_6328()) {
115 bcm_wdt_writel(1, WDT_SOFTRESET_REG);
116 } else {
117 reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
118 reg |= SYS_PLL_SOFT_RESET;
119 bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
120 }
121 while (1)
122 ;
123}
124
125static void __bcm63xx_machine_reboot(char *p)
126{
127 bcm63xx_machine_reboot();
128}
129
130/*
131 * return system type in /proc/cpuinfo
132 */
133const char *get_system_type(void)
134{
135 static char buf[128];
136 snprintf(buf, size: sizeof(buf), fmt: "bcm63xx/%s (0x%04x/0x%02X)",
137 board_get_name(),
138 bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
139 return buf;
140}
141
142void __init plat_time_init(void)
143{
144 mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
145}
146
147void __init plat_mem_setup(void)
148{
149 memblock_add(base: 0, size: bcm63xx_get_memory_size());
150
151 _machine_halt = bcm63xx_machine_halt;
152 _machine_restart = __bcm63xx_machine_reboot;
153 pm_power_off = bcm63xx_machine_halt;
154
155 set_io_port_base(0);
156 ioport_resource.start = 0;
157 ioport_resource.end = ~0;
158
159 board_setup();
160}
161
162static int __init bcm63xx_register_devices(void)
163{
164 /* register gpiochip */
165 bcm63xx_gpio_init();
166
167 return board_register_devices();
168}
169
170arch_initcall(bcm63xx_register_devices);
171

source code of linux/arch/mips/bcm63xx/setup.c