1// SPDX-License-Identifier: GPL-2.0
2/*
3 * ip22-berr.c: Bus error handling.
4 *
5 * Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org)
6 */
7
8#include <linux/init.h>
9#include <linux/kernel.h>
10#include <linux/sched/signal.h>
11
12#include <asm/addrspace.h>
13#include <asm/traps.h>
14#include <asm/branch.h>
15#include <asm/irq_regs.h>
16#include <asm/sgi/mc.h>
17#include <asm/sgi/hpc3.h>
18#include <asm/sgi/ioc.h>
19#include <asm/sgi/ip22.h>
20
21
22static unsigned int cpu_err_stat; /* Status reg for CPU */
23static unsigned int gio_err_stat; /* Status reg for GIO */
24static unsigned int cpu_err_addr; /* Error address reg for CPU */
25static unsigned int gio_err_addr; /* Error address reg for GIO */
26static unsigned int extio_stat;
27static unsigned int hpc3_berr_stat; /* Bus error interrupt status */
28
29static void save_and_clear_buserr(void)
30{
31 /* save status registers */
32 cpu_err_addr = sgimc->cerr;
33 cpu_err_stat = sgimc->cstat;
34 gio_err_addr = sgimc->gerr;
35 gio_err_stat = sgimc->gstat;
36 extio_stat = ip22_is_fullhouse() ? sgioc->extio : (sgint->errstat << 4);
37 hpc3_berr_stat = hpc3c0->bestat;
38
39 sgimc->cstat = sgimc->gstat = 0;
40}
41
42#define GIO_ERRMASK 0xff00
43#define CPU_ERRMASK 0x3f00
44
45static void print_buserr(void)
46{
47 if (extio_stat & EXTIO_MC_BUSERR)
48 printk(KERN_ERR "MC Bus Error\n");
49 if (extio_stat & EXTIO_HPC3_BUSERR)
50 printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
51 hpc3_berr_stat,
52 (hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >>
53 HPC3_BESTAT_PIDSHIFT,
54 (hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA",
55 hpc3_berr_stat & HPC3_BESTAT_BLMASK);
56 if (extio_stat & EXTIO_EISA_BUSERR)
57 printk(KERN_ERR "EISA Bus Error\n");
58 if (cpu_err_stat & CPU_ERRMASK)
59 printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
60 cpu_err_stat,
61 cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "",
62 cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "",
63 cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "",
64 cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "",
65 cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "",
66 cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "",
67 cpu_err_addr);
68 if (gio_err_stat & GIO_ERRMASK)
69 printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
70 gio_err_stat,
71 gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "",
72 gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "",
73 gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "",
74 gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "",
75 gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "",
76 gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "",
77 gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "",
78 gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "",
79 gio_err_addr);
80}
81
82/*
83 * MC sends an interrupt whenever bus or parity errors occur. In addition,
84 * if the error happened during a CPU read, it also asserts the bus error
85 * pin on the R4K. Code in bus error handler save the MC bus error registers
86 * and then clear the interrupt when this happens.
87 */
88
89void ip22_be_interrupt(int irq)
90{
91 const int field = 2 * sizeof(unsigned long);
92 struct pt_regs *regs = get_irq_regs();
93
94 save_and_clear_buserr();
95 print_buserr();
96 printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
97 (regs->cp0_cause & 4) ? "Data" : "Instruction",
98 field, regs->cp0_epc, field, regs->regs[31]);
99 /* Assume it would be too dangerous to continue ... */
100 die_if_kernel("Oops", regs);
101 force_sig(SIGBUS);
102}
103
104static int ip22_be_handler(struct pt_regs *regs, int is_fixup)
105{
106 save_and_clear_buserr();
107 if (is_fixup)
108 return MIPS_BE_FIXUP;
109 print_buserr();
110 return MIPS_BE_FATAL;
111}
112
113void __init ip22_be_init(void)
114{
115 mips_set_be_handler(ip22_be_handler);
116}
117

source code of linux/arch/mips/sgi-ip22/ip22-berr.c