Warning: This file is not a C or C++ file. It does not have highlighting.
| 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
|---|---|
| 2 | #ifndef __ASM_SH_RENESAS_SH7785LCR_H |
| 3 | #define __ASM_SH_RENESAS_SH7785LCR_H |
| 4 | |
| 5 | /* |
| 6 | * This board has 2 physical memory maps. |
| 7 | * It can be changed with DIP switch(S2-5). |
| 8 | * |
| 9 | * phys address | S2-5 = OFF | S2-5 = ON |
| 10 | * -----------------------------+---------------+--------------- |
| 11 | * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash |
| 12 | * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD |
| 13 | * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C |
| 14 | * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM |
| 15 | * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM |
| 16 | * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 |
| 17 | * 0x14000000 - 0x17ffffff(CS5) | reserved | USB |
| 18 | * 0x18000000 - 0x1bffffff(CS6) | reserved | SD |
| 19 | * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) |
| 20 | * |
| 21 | */ |
| 22 | |
| 23 | #define NOR_FLASH_ADDR 0x00000000 |
| 24 | #define NOR_FLASH_SIZE 0x04000000 |
| 25 | |
| 26 | #define PLD_BASE_ADDR 0x04000000 |
| 27 | #define PLD_PCICR (PLD_BASE_ADDR + 0x00) |
| 28 | #define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) |
| 29 | #define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) |
| 30 | #define PLD_POFCR (PLD_BASE_ADDR + 0x06) |
| 31 | #define PLD_LEDCR (PLD_BASE_ADDR + 0x08) |
| 32 | #define PLD_SWSR (PLD_BASE_ADDR + 0x0a) |
| 33 | #define PLD_VERSR (PLD_BASE_ADDR + 0x0c) |
| 34 | #define PLD_MMSR (PLD_BASE_ADDR + 0x0e) |
| 35 | |
| 36 | #define PCA9564_ADDR 0x06000000 /* I2C */ |
| 37 | #define PCA9564_SIZE 0x00000100 |
| 38 | |
| 39 | #define PCA9564_PROTO_32BIT_ADDR 0x14000000 |
| 40 | |
| 41 | #define SM107_MEM_ADDR 0x10000000 |
| 42 | #define SM107_MEM_SIZE 0x00e00000 |
| 43 | #define SM107_REG_ADDR 0x13e00000 |
| 44 | #define SM107_REG_SIZE 0x00200000 |
| 45 | |
| 46 | #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) |
| 47 | #define R8A66597_ADDR 0x14000000 /* USB */ |
| 48 | #define CG200_ADDR 0x18000000 /* SD */ |
| 49 | #else |
| 50 | #define R8A66597_ADDR 0x08000000 |
| 51 | #define CG200_ADDR 0x0c000000 |
| 52 | #endif |
| 53 | |
| 54 | #define R8A66597_SIZE 0x00000100 |
| 55 | #define CG200_SIZE 0x00010000 |
| 56 | |
| 57 | #endif /* __ASM_SH_RENESAS_SH7785LCR_H */ |
| 58 | |
| 59 |
Warning: This file is not a C or C++ file. It does not have highlighting.