Warning: This file is not a C or C++ file. It does not have highlighting.
1 | /* SPDX-License-Identifier: GPL-2.0 */ |
---|---|
2 | #ifndef __ASM_SH_IODATA_LANDISK_H |
3 | #define __ASM_SH_IODATA_LANDISK_H |
4 | |
5 | /* |
6 | * arch/sh/include/mach-landisk/mach/iodata_landisk.h |
7 | * |
8 | * Copyright (C) 2000 Atom Create Engineering Co., Ltd. |
9 | * |
10 | * IO-DATA LANDISK support |
11 | */ |
12 | #include <linux/sh_intc.h> |
13 | |
14 | /* Box specific addresses. */ |
15 | |
16 | #define PA_USB 0xa4000000 /* USB Controller M66590 */ |
17 | |
18 | #define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ |
19 | #define PA_LED 0xb0000001 /* LED Control Register */ |
20 | #define PA_STATUS 0xb0000002 /* Switch Status Register */ |
21 | #define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ |
22 | #define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ |
23 | #define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ |
24 | /* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ |
25 | #define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ |
26 | |
27 | #define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ |
28 | #define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ |
29 | |
30 | #define IRQ_PCIINTA evt2irq(0x2a0) /* PCI INTA IRQ */ |
31 | #define IRQ_PCIINTB evt2irq(0x2c0) /* PCI INTB IRQ */ |
32 | #define IRQ_PCIINTC evt2irq(0x2e0) /* PCI INTC IRQ */ |
33 | #define IRQ_PCIINTD evt2irq(0x300) /* PCI INTD IRQ */ |
34 | #define IRQ_ATA evt2irq(0x320) /* ATA IRQ */ |
35 | #define IRQ_FATA evt2irq(0x340) /* FATA IRQ */ |
36 | #define IRQ_POWER evt2irq(0x360) /* Power Switch IRQ */ |
37 | #define IRQ_BUTTON evt2irq(0x380) /* USL-5P Button IRQ */ |
38 | #define IRQ_FAULT evt2irq(0x3a0) /* USL-5P Fault IRQ */ |
39 | |
40 | void init_landisk_IRQ(void); |
41 | |
42 | #define __IO_PREFIX landisk |
43 | #include <asm/io_generic.h> |
44 | |
45 | #endif /* __ASM_SH_IODATA_LANDISK_H */ |
46 | |
47 |
Warning: This file is not a C or C++ file. It does not have highlighting.