1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * Framework for ISA radio drivers.
4 * This takes care of all the V4L2 scaffolding, allowing the ISA drivers
5 * to concentrate on the actual hardware operation.
6 *
7 * Copyright (C) 2012 Hans Verkuil <hans.verkuil@cisco.com>
8 */
9
10#ifndef _RADIO_ISA_H_
11#define _RADIO_ISA_H_
12
13#include <linux/isa.h>
14#include <linux/pnp.h>
15#include <linux/videodev2.h>
16#include <media/v4l2-device.h>
17#include <media/v4l2-ctrls.h>
18
19struct radio_isa_driver;
20struct radio_isa_ops;
21
22/* Core structure for radio ISA cards */
23struct radio_isa_card {
24 const struct radio_isa_driver *drv;
25 struct v4l2_device v4l2_dev;
26 struct v4l2_ctrl_handler hdl;
27 struct video_device vdev;
28 struct mutex lock;
29 const struct radio_isa_ops *ops;
30 struct { /* mute/volume cluster */
31 struct v4l2_ctrl *mute;
32 struct v4l2_ctrl *volume;
33 };
34 /* I/O port */
35 int io;
36
37 /* Card is in stereo audio mode */
38 bool stereo;
39 /* Current frequency */
40 u32 freq;
41};
42
43struct radio_isa_ops {
44 /* Allocate and initialize a radio_isa_card struct */
45 struct radio_isa_card *(*alloc)(void);
46 /* Probe whether a card is present at the given port */
47 bool (*probe)(struct radio_isa_card *isa, int io);
48 /* Special card initialization can be done here, this is called after
49 * the standard controls are registered, but before they are setup,
50 * thus allowing drivers to add their own controls here. */
51 int (*init)(struct radio_isa_card *isa);
52 /* Set mute and volume. */
53 int (*s_mute_volume)(struct radio_isa_card *isa, bool mute, int volume);
54 /* Set frequency */
55 int (*s_frequency)(struct radio_isa_card *isa, u32 freq);
56 /* Set stereo/mono audio mode */
57 int (*s_stereo)(struct radio_isa_card *isa, bool stereo);
58 /* Get rxsubchans value for VIDIOC_G_TUNER */
59 u32 (*g_rxsubchans)(struct radio_isa_card *isa);
60 /* Get the signal strength for VIDIOC_G_TUNER */
61 u32 (*g_signal)(struct radio_isa_card *isa);
62};
63
64/* Top level structure needed to instantiate the cards */
65struct radio_isa_driver {
66 struct isa_driver driver;
67#ifdef CONFIG_PNP
68 struct pnp_driver pnp_driver;
69#endif
70 const struct radio_isa_ops *ops;
71 /* The module_param_array with the specified I/O ports */
72 int *io_params;
73 /* The module_param_array with the radio_nr values */
74 int *radio_nr_params;
75 /* Whether we should probe for possible cards */
76 bool probe;
77 /* The list of possible I/O ports */
78 const int *io_ports;
79 /* The size of that list */
80 int num_of_io_ports;
81 /* The region size to request */
82 unsigned region_size;
83 /* The name of the card */
84 const char *card;
85 /* Card can capture stereo audio */
86 bool has_stereo;
87 /* The maximum volume for the volume control. If 0, then there
88 is no volume control possible. */
89 int max_volume;
90};
91
92int radio_isa_match(struct device *pdev, unsigned int dev);
93int radio_isa_probe(struct device *pdev, unsigned int dev);
94void radio_isa_remove(struct device *pdev, unsigned int dev);
95#ifdef CONFIG_PNP
96int radio_isa_pnp_probe(struct pnp_dev *dev,
97 const struct pnp_device_id *dev_id);
98void radio_isa_pnp_remove(struct pnp_dev *dev);
99#endif
100
101#endif
102

source code of linux/drivers/media/radio/radio-isa.h