1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 cx231xx-pcb-cfg.h - driver for Conexant
4 Cx23100/101/102 USB video capture devices
5
6 Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
7
8 */
9
10#ifndef _PCB_CONFIG_H_
11#define _PCB_CONFIG_H_
12
13#include <linux/init.h>
14#include <linux/module.h>
15
16/***************************************************************************
17 * Class Information *
18***************************************************************************/
19#define CLASS_DEFAULT 0xFF
20
21enum VENDOR_REQUEST_TYPE {
22 /* Set/Get I2C */
23 VRT_SET_I2C0 = 0x0,
24 VRT_SET_I2C1 = 0x1,
25 VRT_SET_I2C2 = 0x2,
26 VRT_GET_I2C0 = 0x4,
27 VRT_GET_I2C1 = 0x5,
28 VRT_GET_I2C2 = 0x6,
29
30 /* Set/Get GPIO */
31 VRT_SET_GPIO = 0x8,
32 VRT_GET_GPIO = 0x9,
33
34 /* Set/Get GPIE */
35 VRT_SET_GPIE = 0xA,
36 VRT_GET_GPIE = 0xB,
37
38 /* Set/Get Register Control/Status */
39 VRT_SET_REGISTER = 0xC,
40 VRT_GET_REGISTER = 0xD,
41
42 /* Get Extended Compat ID Descriptor */
43 VRT_GET_EXTCID_DESC = 0xFF,
44};
45
46enum BYTE_ENABLE_MASK {
47 ENABLE_ONE_BYTE = 0x1,
48 ENABLE_TWE_BYTE = 0x3,
49 ENABLE_THREE_BYTE = 0x7,
50 ENABLE_FOUR_BYTE = 0xF,
51};
52
53#define SPEED_MASK 0x1
54enum USB_SPEED{
55 FULL_SPEED = 0x0, /* 0: full speed */
56 HIGH_SPEED = 0x1 /* 1: high speed */
57};
58
59#define TS_MASK 0x6
60enum TS_PORT{
61 NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid,
62 only offers Analog TV or Video */
63 TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode :
64 Digital or External Analog/Compressed source) */
65 TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs
66 (Dual inputs from Digital and/or
67 External Analog/Compressed sources) */
68 TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector
69 to external clock */
70 TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output,
71 TS2 Input (from Compressor) */
72};
73
74#define EAVP_MASK 0x8
75enum EAV_PRESENT{
76 NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs
77 (no need for i2s block),
78 Analog Tuner must be present */
79 EXTERNAL_AV = 0x8 /* 1: External A/V inputs
80 present (requires i2s blk) */
81};
82
83#define ATM_MASK 0x30
84enum AT_MODE{
85 DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */
86 BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite &
87 Sound-IF Signals present */
88 NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */
89};
90
91#define PWR_SEL_MASK 0x40
92enum POWE_TYPE{
93 SELF_POWER = 0x0, /* 0: self power */
94 BUS_POWER = 0x40 /* 1: bus power */
95};
96
97enum USB_POWE_TYPE{
98 USB_SELF_POWER = 0,
99 USB_BUS_POWER
100};
101
102#define BO_0_MASK 0x80
103enum AVDEC_STATUS{
104 AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */
105 AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */
106};
107
108#define BO_1_MASK 0x100
109
110#define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */
111#define SELFPOWER_MASK 0x86
112
113/***************************************************************************/
114#define NOT_DECIDE_YET 0xFE
115#define NOT_SUPPORTED 0xFF
116
117/***************************************************************************
118 * for mod field use *
119***************************************************************************/
120#define MOD_DIGITAL 0x1
121#define MOD_ANALOG 0x2
122#define MOD_DIF 0x4
123#define MOD_EXTERNAL 0x8
124#define CAP_ALL_MOD 0x0f
125
126/***************************************************************************
127 * source define *
128***************************************************************************/
129#define SOURCE_DIGITAL 0x1
130#define SOURCE_ANALOG 0x2
131#define SOURCE_DIF 0x4
132#define SOURCE_EXTERNAL 0x8
133#define SOURCE_TS_BDA 0x10
134#define SOURCE_TS_ENCODE 0x20
135#define SOURCE_TS_EXTERNAL 0x40
136
137/***************************************************************************
138 * interface information define *
139***************************************************************************/
140struct INTERFACE_INFO {
141 u8 interrupt_index;
142 u8 ts1_index;
143 u8 ts2_index;
144 u8 audio_index;
145 u8 video_index;
146 u8 vanc_index; /* VBI */
147 u8 hanc_index; /* Sliced CC */
148 u8 ir_index;
149};
150
151enum INDEX_INTERFACE_INFO{
152 INDEX_INTERRUPT = 0x0,
153 INDEX_TS1,
154 INDEX_TS2,
155 INDEX_AUDIO,
156 INDEX_VIDEO,
157 INDEX_VANC,
158 INDEX_HANC,
159 INDEX_IR,
160};
161
162/***************************************************************************
163 * configuration information define *
164***************************************************************************/
165struct CONFIG_INFO {
166 u8 config_index;
167 struct INTERFACE_INFO interface_info;
168};
169
170struct pcb_config {
171 u8 index;
172 u8 type; /* bus power or self power,
173 self power--0, bus_power--1 */
174 u8 speed; /* usb speed, 2.0--1, 1.1--0 */
175 u8 mode; /* digital , anlog, dif or external A/V */
176 u32 ts1_source; /* three source -- BDA,External,encode */
177 u32 ts2_source;
178 u32 analog_source;
179 u8 digital_index; /* bus-power used */
180 u8 analog_index; /* bus-power used */
181 u8 dif_index; /* bus-power used */
182 u8 external_index; /* bus-power used */
183 u8 config_num; /* current config num, 0,1,2,
184 for self-power, always 0 */
185 struct CONFIG_INFO hs_config_info[3];
186 struct CONFIG_INFO fs_config_info[3];
187};
188
189enum INDEX_PCB_CONFIG{
190 INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
191 INDEX_SELFPOWER_DUAL_DIGITAL,
192 INDEX_SELFPOWER_ANALOG_ONLY,
193 INDEX_SELFPOWER_DUAL,
194 INDEX_SELFPOWER_TRIPLE,
195 INDEX_SELFPOWER_COMPRESSOR,
196 INDEX_BUSPOWER_DIGITAL_ONLY,
197 INDEX_BUSPOWER_ANALOG_ONLY,
198 INDEX_BUSPOWER_DIF_ONLY,
199 INDEX_BUSPOWER_EXTERNAL_ONLY,
200 INDEX_BUSPOWER_EXTERNAL_ANALOG,
201 INDEX_BUSPOWER_EXTERNAL_DIF,
202 INDEX_BUSPOWER_EXTERNAL_DIGITAL,
203 INDEX_BUSPOWER_DIGITAL_ANALOG,
204 INDEX_BUSPOWER_DIGITAL_DIF,
205 INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
206 INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
207};
208
209/***************************************************************************/
210struct cx231xx;
211
212int initialize_cx231xx(struct cx231xx *p_dev);
213
214#endif
215

source code of linux/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h