1 | /* |
2 | Written 1997-1998 by Donald Becker. |
3 | |
4 | This software may be used and distributed according to the terms |
5 | of the GNU General Public License, incorporated herein by reference. |
6 | |
7 | This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard. |
8 | |
9 | The author may be reached as becker@scyld.com, or C/O |
10 | Scyld Computing Corporation |
11 | 410 Severn Ave., Suite 210 |
12 | Annapolis MD 21403 |
13 | |
14 | |
15 | 2000/2/2- Added support for kernel-level ISAPnP |
16 | by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo |
17 | Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox. |
18 | |
19 | 2001/11/17 - Added ethtool support (jgarzik) |
20 | |
21 | 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk) |
22 | |
23 | */ |
24 | |
25 | #define DRV_NAME "3c515" |
26 | |
27 | #define CORKSCREW 1 |
28 | |
29 | /* "Knobs" that adjust features and parameters. */ |
30 | /* Set the copy breakpoint for the copy-only-tiny-frames scheme. |
31 | Setting to > 1512 effectively disables this feature. */ |
32 | static int rx_copybreak = 200; |
33 | |
34 | /* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */ |
35 | static const int mtu = 1500; |
36 | |
37 | /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ |
38 | static int max_interrupt_work = 20; |
39 | |
40 | /* Enable the automatic media selection code -- usually set. */ |
41 | #define AUTOMEDIA 1 |
42 | |
43 | /* Allow the use of fragment bus master transfers instead of only |
44 | programmed-I/O for Vortex cards. Full-bus-master transfers are always |
45 | enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined, |
46 | the feature may be turned on using 'options'. */ |
47 | #define VORTEX_BUS_MASTER |
48 | |
49 | /* A few values that may be tweaked. */ |
50 | /* Keep the ring sizes a power of two for efficiency. */ |
51 | #define TX_RING_SIZE 16 |
52 | #define RX_RING_SIZE 16 |
53 | #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ |
54 | |
55 | #include <linux/module.h> |
56 | #include <linux/isapnp.h> |
57 | #include <linux/kernel.h> |
58 | #include <linux/netdevice.h> |
59 | #include <linux/string.h> |
60 | #include <linux/errno.h> |
61 | #include <linux/in.h> |
62 | #include <linux/ioport.h> |
63 | #include <linux/skbuff.h> |
64 | #include <linux/etherdevice.h> |
65 | #include <linux/interrupt.h> |
66 | #include <linux/timer.h> |
67 | #include <linux/ethtool.h> |
68 | #include <linux/bitops.h> |
69 | #include <linux/uaccess.h> |
70 | |
71 | #include <net/Space.h> |
72 | |
73 | #include <asm/io.h> |
74 | #include <asm/dma.h> |
75 | |
76 | #define NEW_MULTICAST |
77 | #include <linux/delay.h> |
78 | |
79 | #define MAX_UNITS 8 |
80 | |
81 | MODULE_AUTHOR("Donald Becker <becker@scyld.com>" ); |
82 | MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver" ); |
83 | MODULE_LICENSE("GPL" ); |
84 | |
85 | /* "Knobs" for adjusting internal parameters. */ |
86 | /* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */ |
87 | #define DRIVER_DEBUG 1 |
88 | /* Some values here only for performance evaluation and path-coverage |
89 | debugging. */ |
90 | static int rx_nocopy, rx_copy, queued_packet; |
91 | |
92 | /* Number of times to check to see if the Tx FIFO has space, used in some |
93 | limited cases. */ |
94 | #define WAIT_TX_AVAIL 200 |
95 | |
96 | /* Operational parameter that usually are not changed. */ |
97 | #define TX_TIMEOUT ((4*HZ)/10) /* Time in jiffies before concluding Tx hung */ |
98 | |
99 | /* The size here is somewhat misleading: the Corkscrew also uses the ISA |
100 | aliased registers at <base>+0x400. |
101 | */ |
102 | #define CORKSCREW_TOTAL_SIZE 0x20 |
103 | |
104 | #ifdef DRIVER_DEBUG |
105 | static int corkscrew_debug = DRIVER_DEBUG; |
106 | #else |
107 | static int corkscrew_debug = 1; |
108 | #endif |
109 | |
110 | #define CORKSCREW_ID 10 |
111 | |
112 | /* |
113 | Theory of Operation |
114 | |
115 | I. Board Compatibility |
116 | |
117 | This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL, |
118 | 3Com's ISA bus adapter for Fast Ethernet. Due to the unique I/O port layout, |
119 | it's not practical to integrate this driver with the other EtherLink drivers. |
120 | |
121 | II. Board-specific settings |
122 | |
123 | The Corkscrew has an EEPROM for configuration, but no special settings are |
124 | needed for Linux. |
125 | |
126 | III. Driver operation |
127 | |
128 | The 3c515 series use an interface that's very similar to the 3c900 "Boomerang" |
129 | PCI cards, with the bus master interface extensively modified to work with |
130 | the ISA bus. |
131 | |
132 | The card is capable of full-bus-master transfers with separate |
133 | lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet, |
134 | DEC Tulip and Intel Speedo3. |
135 | |
136 | This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate |
137 | receive buffer. This scheme allocates full-sized skbuffs as receive |
138 | buffers. The value RX_COPYBREAK is used as the copying breakpoint: it is |
139 | chosen to trade-off the memory wasted by passing the full-sized skbuff to |
140 | the queue layer for all frames vs. the copying cost of copying a frame to a |
141 | correctly-sized skbuff. |
142 | |
143 | |
144 | IIIC. Synchronization |
145 | The driver runs as two independent, single-threaded flows of control. One |
146 | is the send-packet routine, which enforces single-threaded use by the netif |
147 | layer. The other thread is the interrupt handler, which is single |
148 | threaded by the hardware and other software. |
149 | |
150 | IV. Notes |
151 | |
152 | Thanks to Terry Murphy of 3Com for providing documentation and a development |
153 | board. |
154 | |
155 | The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com |
156 | project names. I use these names to eliminate confusion -- 3Com product |
157 | numbers and names are very similar and often confused. |
158 | |
159 | The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes! |
160 | This driver only supports ethernet frames because of the recent MTU limit |
161 | of 1.5K, but the changes to support 4.5K are minimal. |
162 | */ |
163 | |
164 | /* Operational definitions. |
165 | These are not used by other compilation units and thus are not |
166 | exported in a ".h" file. |
167 | |
168 | First the windows. There are eight register windows, with the command |
169 | and status registers available in each. |
170 | */ |
171 | #define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) |
172 | #define EL3_CMD 0x0e |
173 | #define EL3_STATUS 0x0e |
174 | |
175 | /* The top five bits written to EL3_CMD are a command, the lower |
176 | 11 bits are the parameter, if applicable. |
177 | Note that 11 parameters bits was fine for ethernet, but the new chips |
178 | can handle FDDI length frames (~4500 octets) and now parameters count |
179 | 32-bit 'Dwords' rather than octets. */ |
180 | |
181 | enum corkscrew_cmd { |
182 | TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11, |
183 | RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11, |
184 | UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2, |
185 | DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11, |
186 | TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11, |
187 | AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11, |
188 | SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11, |
189 | SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11, |
190 | StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11, |
191 | StatsDisable = 22 << 11, StopCoax = 23 << 11, |
192 | }; |
193 | |
194 | /* The SetRxFilter command accepts the following classes: */ |
195 | enum RxFilter { |
196 | RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 |
197 | }; |
198 | |
199 | /* Bits in the general status register. */ |
200 | enum corkscrew_status { |
201 | IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, |
202 | TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, |
203 | IntReq = 0x0040, StatsFull = 0x0080, |
204 | DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10, |
205 | DMAInProgress = 1 << 11, /* DMA controller is still busy. */ |
206 | CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */ |
207 | }; |
208 | |
209 | /* Register window 1 offsets, the window used in normal operation. |
210 | On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */ |
211 | enum Window1 { |
212 | TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14, |
213 | RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B, |
214 | TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */ |
215 | }; |
216 | enum Window0 { |
217 | Wn0IRQ = 0x08, |
218 | #if defined(CORKSCREW) |
219 | Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */ |
220 | Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */ |
221 | #else |
222 | Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */ |
223 | Wn0EepromData = 12, /* Window 0: EEPROM results register. */ |
224 | #endif |
225 | }; |
226 | enum Win0_EEPROM_bits { |
227 | EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0, |
228 | EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */ |
229 | EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */ |
230 | }; |
231 | |
232 | /* EEPROM locations. */ |
233 | enum eeprom_offset { |
234 | PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3, |
235 | EtherLink3ID = 7, |
236 | }; |
237 | |
238 | enum Window3 { /* Window 3: MAC/config bits. */ |
239 | Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8, |
240 | }; |
241 | enum wn3_config { |
242 | Ram_size = 7, |
243 | Ram_width = 8, |
244 | Ram_speed = 0x30, |
245 | Rom_size = 0xc0, |
246 | Ram_split_shift = 16, |
247 | Ram_split = 3 << Ram_split_shift, |
248 | Xcvr_shift = 20, |
249 | Xcvr = 7 << Xcvr_shift, |
250 | Autoselect = 0x1000000, |
251 | }; |
252 | |
253 | enum Window4 { |
254 | Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */ |
255 | }; |
256 | enum Win4_Media_bits { |
257 | Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */ |
258 | Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */ |
259 | Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */ |
260 | Media_LnkBeat = 0x0800, |
261 | }; |
262 | enum Window7 { /* Window 7: Bus Master control. */ |
263 | Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12, |
264 | }; |
265 | |
266 | /* Boomerang-style bus master control registers. Note ISA aliases! */ |
267 | enum MasterCtrl { |
268 | PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen = |
269 | 0x40c, |
270 | TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418, |
271 | }; |
272 | |
273 | /* The Rx and Tx descriptor lists. |
274 | Caution Alpha hackers: these types are 32 bits! Note also the 8 byte |
275 | alignment contraint on tx_ring[] and rx_ring[]. */ |
276 | struct boom_rx_desc { |
277 | u32 next; |
278 | s32 status; |
279 | u32 addr; |
280 | s32 length; |
281 | }; |
282 | |
283 | /* Values for the Rx status entry. */ |
284 | enum rx_desc_status { |
285 | RxDComplete = 0x00008000, RxDError = 0x4000, |
286 | /* See boomerang_rx() for actual error bits */ |
287 | }; |
288 | |
289 | struct boom_tx_desc { |
290 | u32 next; |
291 | s32 status; |
292 | u32 addr; |
293 | s32 length; |
294 | }; |
295 | |
296 | struct corkscrew_private { |
297 | const char *product_name; |
298 | struct list_head list; |
299 | struct net_device *our_dev; |
300 | /* The Rx and Tx rings are here to keep them quad-word-aligned. */ |
301 | struct boom_rx_desc rx_ring[RX_RING_SIZE]; |
302 | struct boom_tx_desc tx_ring[TX_RING_SIZE]; |
303 | /* The addresses of transmit- and receive-in-place skbuffs. */ |
304 | struct sk_buff *rx_skbuff[RX_RING_SIZE]; |
305 | struct sk_buff *tx_skbuff[TX_RING_SIZE]; |
306 | unsigned int cur_rx, cur_tx; /* The next free ring entry */ |
307 | unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */ |
308 | struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */ |
309 | struct timer_list timer; /* Media selection timer. */ |
310 | int capabilities ; /* Adapter capabilities word. */ |
311 | int options; /* User-settable misc. driver options. */ |
312 | int last_rx_packets; /* For media autoselection. */ |
313 | unsigned int available_media:8, /* From Wn3_Options */ |
314 | media_override:3, /* Passed-in media type. */ |
315 | default_media:3, /* Read from the EEPROM. */ |
316 | full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */ |
317 | full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */ |
318 | tx_full:1; |
319 | spinlock_t lock; |
320 | struct device *dev; |
321 | }; |
322 | |
323 | /* The action to take with a media selection timer tick. |
324 | Note that we deviate from the 3Com order by checking 10base2 before AUI. |
325 | */ |
326 | enum xcvr_types { |
327 | XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx, |
328 | XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8, |
329 | }; |
330 | |
331 | static struct media_table { |
332 | char *name; |
333 | unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */ |
334 | mask:8, /* The transceiver-present bit in Wn3_Config. */ |
335 | next:8; /* The media type to try next. */ |
336 | short wait; /* Time before we check media status. */ |
337 | } media_tbl[] = { |
338 | { "10baseT" , Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 }, |
339 | { "10Mbs AUI" , Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10}, |
340 | { "undefined" , 0, 0x80, XCVR_10baseT, 10000}, |
341 | { "10base2" , 0, 0x10, XCVR_AUI, (1 * HZ) / 10}, |
342 | { "100baseTX" , Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10}, |
343 | { "100baseFX" , Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10}, |
344 | { "MII" , 0, 0x40, XCVR_10baseT, 3 * HZ}, |
345 | { "undefined" , 0, 0x01, XCVR_10baseT, 10000}, |
346 | { "Default" , 0, 0xFF, XCVR_10baseT, 10000}, |
347 | }; |
348 | |
349 | #ifdef __ISAPNP__ |
350 | static struct isapnp_device_id corkscrew_isapnp_adapters[] = { |
351 | { ISAPNP_ANY_ID, ISAPNP_ANY_ID, |
352 | ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051), |
353 | (long) "3Com Fast EtherLink ISA" }, |
354 | { } /* terminate list */ |
355 | }; |
356 | |
357 | MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters); |
358 | |
359 | static int nopnp; |
360 | #endif /* __ISAPNP__ */ |
361 | |
362 | static struct net_device *corkscrew_scan(int unit); |
363 | static int corkscrew_setup(struct net_device *dev, int ioaddr, |
364 | struct pnp_dev *idev, int card_number); |
365 | static int corkscrew_open(struct net_device *dev); |
366 | static void corkscrew_timer(struct timer_list *t); |
367 | static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, |
368 | struct net_device *dev); |
369 | static int corkscrew_rx(struct net_device *dev); |
370 | static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue); |
371 | static int boomerang_rx(struct net_device *dev); |
372 | static irqreturn_t corkscrew_interrupt(int irq, void *dev_id); |
373 | static int corkscrew_close(struct net_device *dev); |
374 | static void update_stats(int addr, struct net_device *dev); |
375 | static struct net_device_stats *corkscrew_get_stats(struct net_device *dev); |
376 | static void set_rx_mode(struct net_device *dev); |
377 | static const struct ethtool_ops netdev_ethtool_ops; |
378 | |
379 | |
380 | /* |
381 | Unfortunately maximizing the shared code between the integrated and |
382 | module version of the driver results in a complicated set of initialization |
383 | procedures. |
384 | init_module() -- modules / tc59x_init() -- built-in |
385 | The wrappers for corkscrew_scan() |
386 | corkscrew_scan() The common routine that scans for PCI and EISA cards |
387 | corkscrew_found_device() Allocate a device structure when we find a card. |
388 | Different versions exist for modules and built-in. |
389 | corkscrew_probe1() Fill in the device structure -- this is separated |
390 | so that the modules code can put it in dev->init. |
391 | */ |
392 | /* This driver uses 'options' to pass the media type, full-duplex flag, etc. */ |
393 | /* Note: this is the only limit on the number of cards supported!! */ |
394 | static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, }; |
395 | |
396 | #ifdef MODULE |
397 | static int debug = -1; |
398 | |
399 | module_param(debug, int, 0); |
400 | module_param_array(options, int, NULL, 0); |
401 | module_param(rx_copybreak, int, 0); |
402 | module_param(max_interrupt_work, int, 0); |
403 | MODULE_PARM_DESC(debug, "3c515 debug level (0-6)" ); |
404 | MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering" ); |
405 | MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames" ); |
406 | MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt" ); |
407 | |
408 | /* A list of all installed Vortex devices, for removing the driver module. */ |
409 | /* we will need locking (and refcounting) if we ever use it for more */ |
410 | static LIST_HEAD(root_corkscrew_dev); |
411 | |
412 | static int corkscrew_init_module(void) |
413 | { |
414 | int found = 0; |
415 | if (debug >= 0) |
416 | corkscrew_debug = debug; |
417 | while (corkscrew_scan(-1)) |
418 | found++; |
419 | return found ? 0 : -ENODEV; |
420 | } |
421 | module_init(corkscrew_init_module); |
422 | |
423 | #else |
424 | struct net_device *tc515_probe(int unit) |
425 | { |
426 | struct net_device *dev = corkscrew_scan(unit); |
427 | |
428 | if (!dev) |
429 | return ERR_PTR(error: -ENODEV); |
430 | |
431 | return dev; |
432 | } |
433 | #endif /* not MODULE */ |
434 | |
435 | static int check_device(unsigned ioaddr) |
436 | { |
437 | int timer; |
438 | |
439 | if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515" )) |
440 | return 0; |
441 | /* Check the resource configuration for a matching ioaddr. */ |
442 | if ((inw(port: ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) { |
443 | release_region(ioaddr, CORKSCREW_TOTAL_SIZE); |
444 | return 0; |
445 | } |
446 | /* Verify by reading the device ID from the EEPROM. */ |
447 | outw(value: EEPROM_Read + 7, port: ioaddr + Wn0EepromCmd); |
448 | /* Pause for at least 162 us. for the read to take place. */ |
449 | for (timer = 4; timer >= 0; timer--) { |
450 | udelay(162); |
451 | if ((inw(port: ioaddr + Wn0EepromCmd) & 0x0200) == 0) |
452 | break; |
453 | } |
454 | if (inw(port: ioaddr + Wn0EepromData) != 0x6d50) { |
455 | release_region(ioaddr, CORKSCREW_TOTAL_SIZE); |
456 | return 0; |
457 | } |
458 | return 1; |
459 | } |
460 | |
461 | static void cleanup_card(struct net_device *dev) |
462 | { |
463 | struct corkscrew_private *vp = netdev_priv(dev); |
464 | list_del_init(entry: &vp->list); |
465 | if (dev->dma) |
466 | free_dma(dmanr: dev->dma); |
467 | outw(value: TotalReset, port: dev->base_addr + EL3_CMD); |
468 | release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE); |
469 | if (vp->dev) |
470 | pnp_device_detach(to_pnp_dev(vp->dev)); |
471 | } |
472 | |
473 | static struct net_device *corkscrew_scan(int unit) |
474 | { |
475 | struct net_device *dev; |
476 | static int cards_found = 0; |
477 | static int ioaddr; |
478 | int err; |
479 | #ifdef __ISAPNP__ |
480 | short i; |
481 | static int pnp_cards; |
482 | #endif |
483 | |
484 | dev = alloc_etherdev(sizeof(struct corkscrew_private)); |
485 | if (!dev) |
486 | return ERR_PTR(error: -ENOMEM); |
487 | |
488 | if (unit >= 0) { |
489 | sprintf(buf: dev->name, fmt: "eth%d" , unit); |
490 | netdev_boot_setup_check(dev); |
491 | } |
492 | |
493 | #ifdef __ISAPNP__ |
494 | if(nopnp == 1) |
495 | goto no_pnp; |
496 | for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) { |
497 | struct pnp_dev *idev = NULL; |
498 | int irq; |
499 | while((idev = pnp_find_dev(NULL, |
500 | vendor: corkscrew_isapnp_adapters[i].vendor, |
501 | function: corkscrew_isapnp_adapters[i].function, |
502 | from: idev))) { |
503 | |
504 | if (pnp_device_attach(pnp_dev: idev) < 0) |
505 | continue; |
506 | if (pnp_activate_dev(dev: idev) < 0) { |
507 | pr_warn("pnp activate failed (out of resources?)\n" ); |
508 | pnp_device_detach(pnp_dev: idev); |
509 | continue; |
510 | } |
511 | if (!pnp_port_valid(dev: idev, bar: 0) || !pnp_irq_valid(dev: idev, bar: 0)) { |
512 | pnp_device_detach(pnp_dev: idev); |
513 | continue; |
514 | } |
515 | ioaddr = pnp_port_start(dev: idev, bar: 0); |
516 | irq = pnp_irq(dev: idev, bar: 0); |
517 | if (!check_device(ioaddr)) { |
518 | pnp_device_detach(pnp_dev: idev); |
519 | continue; |
520 | } |
521 | if(corkscrew_debug) |
522 | pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n" , |
523 | (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq); |
524 | pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n" , |
525 | inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); |
526 | /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */ |
527 | SET_NETDEV_DEV(dev, &idev->dev); |
528 | pnp_cards++; |
529 | err = corkscrew_setup(dev, ioaddr, idev, card_number: cards_found++); |
530 | if (!err) |
531 | return dev; |
532 | cleanup_card(dev); |
533 | } |
534 | } |
535 | no_pnp: |
536 | #endif /* __ISAPNP__ */ |
537 | |
538 | /* Check all locations on the ISA bus -- evil! */ |
539 | for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) { |
540 | if (!check_device(ioaddr)) |
541 | continue; |
542 | |
543 | pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n" , |
544 | inl(ioaddr + 0x2002), inw(ioaddr + 0x2000)); |
545 | err = corkscrew_setup(dev, ioaddr, NULL, card_number: cards_found++); |
546 | if (!err) |
547 | return dev; |
548 | cleanup_card(dev); |
549 | } |
550 | free_netdev(dev); |
551 | return NULL; |
552 | } |
553 | |
554 | |
555 | static const struct net_device_ops netdev_ops = { |
556 | .ndo_open = corkscrew_open, |
557 | .ndo_stop = corkscrew_close, |
558 | .ndo_start_xmit = corkscrew_start_xmit, |
559 | .ndo_tx_timeout = corkscrew_timeout, |
560 | .ndo_get_stats = corkscrew_get_stats, |
561 | .ndo_set_rx_mode = set_rx_mode, |
562 | .ndo_set_mac_address = eth_mac_addr, |
563 | .ndo_validate_addr = eth_validate_addr, |
564 | }; |
565 | |
566 | |
567 | static int corkscrew_setup(struct net_device *dev, int ioaddr, |
568 | struct pnp_dev *idev, int card_number) |
569 | { |
570 | struct corkscrew_private *vp = netdev_priv(dev); |
571 | unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */ |
572 | __be16 addr[ETH_ALEN / 2]; |
573 | int i; |
574 | int irq; |
575 | |
576 | #ifdef __ISAPNP__ |
577 | if (idev) { |
578 | irq = pnp_irq(dev: idev, bar: 0); |
579 | vp->dev = &idev->dev; |
580 | } else { |
581 | irq = inw(port: ioaddr + 0x2002) & 15; |
582 | } |
583 | #else |
584 | irq = inw(ioaddr + 0x2002) & 15; |
585 | #endif |
586 | |
587 | dev->base_addr = ioaddr; |
588 | dev->irq = irq; |
589 | dev->dma = inw(port: ioaddr + 0x2000) & 7; |
590 | vp->product_name = "3c515" ; |
591 | vp->options = dev->mem_start; |
592 | vp->our_dev = dev; |
593 | |
594 | if (!vp->options) { |
595 | if (card_number >= MAX_UNITS) |
596 | vp->options = -1; |
597 | else |
598 | vp->options = options[card_number]; |
599 | } |
600 | |
601 | if (vp->options >= 0) { |
602 | vp->media_override = vp->options & 7; |
603 | if (vp->media_override == 2) |
604 | vp->media_override = 0; |
605 | vp->full_duplex = (vp->options & 8) ? 1 : 0; |
606 | vp->bus_master = (vp->options & 16) ? 1 : 0; |
607 | } else { |
608 | vp->media_override = 7; |
609 | vp->full_duplex = 0; |
610 | vp->bus_master = 0; |
611 | } |
612 | #ifdef MODULE |
613 | list_add(&vp->list, &root_corkscrew_dev); |
614 | #endif |
615 | |
616 | pr_info("%s: 3Com %s at %#3x," , dev->name, vp->product_name, ioaddr); |
617 | |
618 | spin_lock_init(&vp->lock); |
619 | |
620 | timer_setup(&vp->timer, corkscrew_timer, 0); |
621 | |
622 | /* Read the station address from the EEPROM. */ |
623 | EL3WINDOW(0); |
624 | for (i = 0; i < 0x18; i++) { |
625 | int timer; |
626 | outw(value: EEPROM_Read + i, port: ioaddr + Wn0EepromCmd); |
627 | /* Pause for at least 162 us. for the read to take place. */ |
628 | for (timer = 4; timer >= 0; timer--) { |
629 | udelay(162); |
630 | if ((inw(port: ioaddr + Wn0EepromCmd) & 0x0200) == 0) |
631 | break; |
632 | } |
633 | eeprom[i] = inw(port: ioaddr + Wn0EepromData); |
634 | checksum ^= eeprom[i]; |
635 | if (i < 3) |
636 | addr[i] = htons(eeprom[i]); |
637 | } |
638 | eth_hw_addr_set(dev, addr: (u8 *)addr); |
639 | checksum = (checksum ^ (checksum >> 8)) & 0xff; |
640 | if (checksum != 0x00) |
641 | pr_cont(" ***INVALID CHECKSUM %4.4x*** " , checksum); |
642 | pr_cont(" %pM" , dev->dev_addr); |
643 | if (eeprom[16] == 0x11c7) { /* Corkscrew */ |
644 | if (request_dma(dmanr: dev->dma, device_id: "3c515" )) { |
645 | pr_cont(", DMA %d allocation failed" , dev->dma); |
646 | dev->dma = 0; |
647 | } else |
648 | pr_cont(", DMA %d" , dev->dma); |
649 | } |
650 | pr_cont(", IRQ %d\n" , dev->irq); |
651 | /* Tell them about an invalid IRQ. */ |
652 | if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15)) |
653 | pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n" ); |
654 | |
655 | { |
656 | static const char * const ram_split[] = { |
657 | "5:3" , "3:1" , "1:1" , "3:5" |
658 | }; |
659 | __u32 config; |
660 | EL3WINDOW(3); |
661 | vp->available_media = inw(port: ioaddr + Wn3_Options); |
662 | config = inl(port: ioaddr + Wn3_Config); |
663 | if (corkscrew_debug > 1) |
664 | pr_info(" Internal config register is %4.4x, transceivers %#x.\n" , |
665 | config, inw(ioaddr + Wn3_Options)); |
666 | pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n" , |
667 | 8 << config & Ram_size, |
668 | config & Ram_width ? "word" : "byte" , |
669 | ram_split[(config & Ram_split) >> Ram_split_shift], |
670 | config & Autoselect ? "autoselect/" : "" , |
671 | media_tbl[(config & Xcvr) >> Xcvr_shift].name); |
672 | vp->default_media = (config & Xcvr) >> Xcvr_shift; |
673 | vp->autoselect = config & Autoselect ? 1 : 0; |
674 | dev->if_port = vp->default_media; |
675 | } |
676 | if (vp->media_override != 7) { |
677 | pr_info(" Media override to transceiver type %d (%s).\n" , |
678 | vp->media_override, |
679 | media_tbl[vp->media_override].name); |
680 | dev->if_port = vp->media_override; |
681 | } |
682 | |
683 | vp->capabilities = eeprom[16]; |
684 | vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0; |
685 | /* Rx is broken at 10mbps, so we always disable it. */ |
686 | /* vp->full_bus_master_rx = 0; */ |
687 | vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0; |
688 | |
689 | /* The 3c51x-specific entries in the device structure. */ |
690 | dev->netdev_ops = &netdev_ops; |
691 | dev->watchdog_timeo = (400 * HZ) / 1000; |
692 | dev->ethtool_ops = &netdev_ethtool_ops; |
693 | |
694 | return register_netdev(dev); |
695 | } |
696 | |
697 | |
698 | static int corkscrew_open(struct net_device *dev) |
699 | { |
700 | int ioaddr = dev->base_addr; |
701 | struct corkscrew_private *vp = netdev_priv(dev); |
702 | bool armtimer = false; |
703 | __u32 config; |
704 | int i; |
705 | |
706 | /* Before initializing select the active media port. */ |
707 | EL3WINDOW(3); |
708 | if (vp->full_duplex) |
709 | outb(value: 0x20, port: ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */ |
710 | config = inl(port: ioaddr + Wn3_Config); |
711 | |
712 | if (vp->media_override != 7) { |
713 | if (corkscrew_debug > 1) |
714 | pr_info("%s: Media override to transceiver %d (%s).\n" , |
715 | dev->name, vp->media_override, |
716 | media_tbl[vp->media_override].name); |
717 | dev->if_port = vp->media_override; |
718 | } else if (vp->autoselect) { |
719 | /* Find first available media type, starting with 100baseTx. */ |
720 | dev->if_port = 4; |
721 | while (!(vp->available_media & media_tbl[dev->if_port].mask)) |
722 | dev->if_port = media_tbl[dev->if_port].next; |
723 | |
724 | if (corkscrew_debug > 1) |
725 | pr_debug("%s: Initial media type %s.\n" , |
726 | dev->name, media_tbl[dev->if_port].name); |
727 | armtimer = true; |
728 | } else |
729 | dev->if_port = vp->default_media; |
730 | |
731 | config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); |
732 | outl(value: config, port: ioaddr + Wn3_Config); |
733 | |
734 | if (corkscrew_debug > 1) { |
735 | pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n" , |
736 | dev->name, config); |
737 | } |
738 | |
739 | outw(value: TxReset, port: ioaddr + EL3_CMD); |
740 | for (i = 20; i >= 0; i--) |
741 | if (!(inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
742 | break; |
743 | |
744 | outw(value: RxReset, port: ioaddr + EL3_CMD); |
745 | /* Wait a few ticks for the RxReset command to complete. */ |
746 | for (i = 20; i >= 0; i--) |
747 | if (!(inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
748 | break; |
749 | |
750 | outw(value: SetStatusEnb | 0x00, port: ioaddr + EL3_CMD); |
751 | |
752 | /* Use the now-standard shared IRQ implementation. */ |
753 | if (vp->capabilities == 0x11c7) { |
754 | /* Corkscrew: Cannot share ISA resources. */ |
755 | if (dev->irq == 0 || |
756 | dev->dma == 0 || |
757 | request_irq(irq: dev->irq, handler: corkscrew_interrupt, flags: 0, |
758 | name: vp->product_name, dev)) |
759 | return -EAGAIN; |
760 | enable_dma(dmanr: dev->dma); |
761 | set_dma_mode(dmanr: dev->dma, DMA_MODE_CASCADE); |
762 | } else if (request_irq(irq: dev->irq, handler: corkscrew_interrupt, IRQF_SHARED, |
763 | name: vp->product_name, dev)) { |
764 | return -EAGAIN; |
765 | } |
766 | |
767 | if (armtimer) |
768 | mod_timer(timer: &vp->timer, expires: jiffies + media_tbl[dev->if_port].wait); |
769 | |
770 | if (corkscrew_debug > 1) { |
771 | EL3WINDOW(4); |
772 | pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n" , |
773 | dev->name, dev->irq, inw(ioaddr + Wn4_Media)); |
774 | } |
775 | |
776 | /* Set the station address and mask in window 2 each time opened. */ |
777 | EL3WINDOW(2); |
778 | for (i = 0; i < 6; i++) |
779 | outb(value: dev->dev_addr[i], port: ioaddr + i); |
780 | for (; i < 12; i += 2) |
781 | outw(value: 0, port: ioaddr + i); |
782 | |
783 | if (dev->if_port == 3) |
784 | /* Start the thinnet transceiver. We should really wait 50ms... */ |
785 | outw(value: StartCoax, port: ioaddr + EL3_CMD); |
786 | EL3WINDOW(4); |
787 | outw(value: (inw(port: ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) | |
788 | media_tbl[dev->if_port].media_bits, port: ioaddr + Wn4_Media); |
789 | |
790 | /* Switch to the stats window, and clear all stats by reading. */ |
791 | outw(value: StatsDisable, port: ioaddr + EL3_CMD); |
792 | EL3WINDOW(6); |
793 | for (i = 0; i < 10; i++) |
794 | inb(port: ioaddr + i); |
795 | inw(port: ioaddr + 10); |
796 | inw(port: ioaddr + 12); |
797 | /* New: On the Vortex we must also clear the BadSSD counter. */ |
798 | EL3WINDOW(4); |
799 | inb(port: ioaddr + 12); |
800 | /* ..and on the Boomerang we enable the extra statistics bits. */ |
801 | outw(value: 0x0040, port: ioaddr + Wn4_NetDiag); |
802 | |
803 | /* Switch to register set 7 for normal use. */ |
804 | EL3WINDOW(7); |
805 | |
806 | if (vp->full_bus_master_rx) { /* Boomerang bus master. */ |
807 | vp->cur_rx = vp->dirty_rx = 0; |
808 | if (corkscrew_debug > 2) |
809 | pr_debug("%s: Filling in the Rx ring.\n" , dev->name); |
810 | for (i = 0; i < RX_RING_SIZE; i++) { |
811 | struct sk_buff *skb; |
812 | if (i < (RX_RING_SIZE - 1)) |
813 | vp->rx_ring[i].next = |
814 | isa_virt_to_bus(address: &vp->rx_ring[i + 1]); |
815 | else |
816 | vp->rx_ring[i].next = 0; |
817 | vp->rx_ring[i].status = 0; /* Clear complete bit. */ |
818 | vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000; |
819 | skb = netdev_alloc_skb(dev, PKT_BUF_SZ); |
820 | vp->rx_skbuff[i] = skb; |
821 | if (skb == NULL) |
822 | break; /* Bad news! */ |
823 | skb_reserve(skb, len: 2); /* Align IP on 16 byte boundaries */ |
824 | vp->rx_ring[i].addr = isa_virt_to_bus(address: skb->data); |
825 | } |
826 | if (i != 0) |
827 | vp->rx_ring[i - 1].next = |
828 | isa_virt_to_bus(address: &vp->rx_ring[0]); /* Wrap the ring. */ |
829 | outl(value: isa_virt_to_bus(address: &vp->rx_ring[0]), port: ioaddr + UpListPtr); |
830 | } |
831 | if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */ |
832 | vp->cur_tx = vp->dirty_tx = 0; |
833 | outb(PKT_BUF_SZ >> 8, port: ioaddr + TxFreeThreshold); /* Room for a packet. */ |
834 | /* Clear the Tx ring. */ |
835 | for (i = 0; i < TX_RING_SIZE; i++) |
836 | vp->tx_skbuff[i] = NULL; |
837 | outl(value: 0, port: ioaddr + DownListPtr); |
838 | } |
839 | /* Set receiver mode: presumably accept b-case and phys addr only. */ |
840 | set_rx_mode(dev); |
841 | outw(value: StatsEnable, port: ioaddr + EL3_CMD); /* Turn on statistics. */ |
842 | |
843 | netif_start_queue(dev); |
844 | |
845 | outw(value: RxEnable, port: ioaddr + EL3_CMD); /* Enable the receiver. */ |
846 | outw(value: TxEnable, port: ioaddr + EL3_CMD); /* Enable transmitter. */ |
847 | /* Allow status bits to be seen. */ |
848 | outw(value: SetStatusEnb | AdapterFailure | IntReq | StatsFull | |
849 | (vp->full_bus_master_tx ? DownComplete : TxAvailable) | |
850 | (vp->full_bus_master_rx ? UpComplete : RxComplete) | |
851 | (vp->bus_master ? DMADone : 0), port: ioaddr + EL3_CMD); |
852 | /* Ack all pending events, and set active indicator mask. */ |
853 | outw(value: AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, |
854 | port: ioaddr + EL3_CMD); |
855 | outw(value: SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull |
856 | | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete, |
857 | port: ioaddr + EL3_CMD); |
858 | |
859 | return 0; |
860 | } |
861 | |
862 | static void corkscrew_timer(struct timer_list *t) |
863 | { |
864 | #ifdef AUTOMEDIA |
865 | struct corkscrew_private *vp = from_timer(vp, t, timer); |
866 | struct net_device *dev = vp->our_dev; |
867 | int ioaddr = dev->base_addr; |
868 | unsigned long flags; |
869 | int ok = 0; |
870 | |
871 | if (corkscrew_debug > 1) |
872 | pr_debug("%s: Media selection timer tick happened, %s.\n" , |
873 | dev->name, media_tbl[dev->if_port].name); |
874 | |
875 | spin_lock_irqsave(&vp->lock, flags); |
876 | |
877 | { |
878 | int old_window = inw(port: ioaddr + EL3_CMD) >> 13; |
879 | int media_status; |
880 | EL3WINDOW(4); |
881 | media_status = inw(port: ioaddr + Wn4_Media); |
882 | switch (dev->if_port) { |
883 | case 0: |
884 | case 4: |
885 | case 5: /* 10baseT, 100baseTX, 100baseFX */ |
886 | if (media_status & Media_LnkBeat) { |
887 | ok = 1; |
888 | if (corkscrew_debug > 1) |
889 | pr_debug("%s: Media %s has link beat, %x.\n" , |
890 | dev->name, |
891 | media_tbl[dev->if_port].name, |
892 | media_status); |
893 | } else if (corkscrew_debug > 1) |
894 | pr_debug("%s: Media %s is has no link beat, %x.\n" , |
895 | dev->name, |
896 | media_tbl[dev->if_port].name, |
897 | media_status); |
898 | |
899 | break; |
900 | default: /* Other media types handled by Tx timeouts. */ |
901 | if (corkscrew_debug > 1) |
902 | pr_debug("%s: Media %s is has no indication, %x.\n" , |
903 | dev->name, |
904 | media_tbl[dev->if_port].name, |
905 | media_status); |
906 | ok = 1; |
907 | } |
908 | if (!ok) { |
909 | __u32 config; |
910 | |
911 | do { |
912 | dev->if_port = |
913 | media_tbl[dev->if_port].next; |
914 | } |
915 | while (!(vp->available_media & media_tbl[dev->if_port].mask)); |
916 | |
917 | if (dev->if_port == 8) { /* Go back to default. */ |
918 | dev->if_port = vp->default_media; |
919 | if (corkscrew_debug > 1) |
920 | pr_debug("%s: Media selection failing, using default %s port.\n" , |
921 | dev->name, |
922 | media_tbl[dev->if_port].name); |
923 | } else { |
924 | if (corkscrew_debug > 1) |
925 | pr_debug("%s: Media selection failed, now trying %s port.\n" , |
926 | dev->name, |
927 | media_tbl[dev->if_port].name); |
928 | vp->timer.expires = jiffies + media_tbl[dev->if_port].wait; |
929 | add_timer(timer: &vp->timer); |
930 | } |
931 | outw(value: (media_status & ~(Media_10TP | Media_SQE)) | |
932 | media_tbl[dev->if_port].media_bits, |
933 | port: ioaddr + Wn4_Media); |
934 | |
935 | EL3WINDOW(3); |
936 | config = inl(port: ioaddr + Wn3_Config); |
937 | config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift); |
938 | outl(value: config, port: ioaddr + Wn3_Config); |
939 | |
940 | outw(value: dev->if_port == 3 ? StartCoax : StopCoax, |
941 | port: ioaddr + EL3_CMD); |
942 | } |
943 | EL3WINDOW(old_window); |
944 | } |
945 | |
946 | spin_unlock_irqrestore(lock: &vp->lock, flags); |
947 | if (corkscrew_debug > 1) |
948 | pr_debug("%s: Media selection timer finished, %s.\n" , |
949 | dev->name, media_tbl[dev->if_port].name); |
950 | |
951 | #endif /* AUTOMEDIA */ |
952 | } |
953 | |
954 | static void corkscrew_timeout(struct net_device *dev, unsigned int txqueue) |
955 | { |
956 | int i; |
957 | struct corkscrew_private *vp = netdev_priv(dev); |
958 | int ioaddr = dev->base_addr; |
959 | |
960 | pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n" , |
961 | dev->name, inb(ioaddr + TxStatus), |
962 | inw(ioaddr + EL3_STATUS)); |
963 | /* Slight code bloat to be user friendly. */ |
964 | if ((inb(port: ioaddr + TxStatus) & 0x88) == 0x88) |
965 | pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n" , |
966 | dev->name); |
967 | #ifndef final_version |
968 | pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n" , |
969 | vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx, |
970 | vp->cur_tx); |
971 | pr_debug(" Down list %8.8x vs. %p.\n" , inl(ioaddr + DownListPtr), |
972 | &vp->tx_ring[0]); |
973 | for (i = 0; i < TX_RING_SIZE; i++) { |
974 | pr_debug(" %d: %p length %8.8x status %8.8x\n" , i, |
975 | &vp->tx_ring[i], |
976 | vp->tx_ring[i].length, vp->tx_ring[i].status); |
977 | } |
978 | #endif |
979 | /* Issue TX_RESET and TX_START commands. */ |
980 | outw(value: TxReset, port: ioaddr + EL3_CMD); |
981 | for (i = 20; i >= 0; i--) |
982 | if (!(inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
983 | break; |
984 | outw(value: TxEnable, port: ioaddr + EL3_CMD); |
985 | netif_trans_update(dev); /* prevent tx timeout */ |
986 | dev->stats.tx_errors++; |
987 | dev->stats.tx_dropped++; |
988 | netif_wake_queue(dev); |
989 | } |
990 | |
991 | static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb, |
992 | struct net_device *dev) |
993 | { |
994 | struct corkscrew_private *vp = netdev_priv(dev); |
995 | int ioaddr = dev->base_addr; |
996 | |
997 | /* Block a timer-based transmit from overlapping. */ |
998 | |
999 | netif_stop_queue(dev); |
1000 | |
1001 | if (vp->full_bus_master_tx) { /* BOOMERANG bus-master */ |
1002 | /* Calculate the next Tx descriptor entry. */ |
1003 | int entry = vp->cur_tx % TX_RING_SIZE; |
1004 | struct boom_tx_desc *prev_entry; |
1005 | unsigned long flags; |
1006 | int i; |
1007 | |
1008 | if (vp->tx_full) /* No room to transmit with */ |
1009 | return NETDEV_TX_BUSY; |
1010 | if (vp->cur_tx != 0) |
1011 | prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE]; |
1012 | else |
1013 | prev_entry = NULL; |
1014 | if (corkscrew_debug > 3) |
1015 | pr_debug("%s: Trying to send a packet, Tx index %d.\n" , |
1016 | dev->name, vp->cur_tx); |
1017 | /* vp->tx_full = 1; */ |
1018 | vp->tx_skbuff[entry] = skb; |
1019 | vp->tx_ring[entry].next = 0; |
1020 | vp->tx_ring[entry].addr = isa_virt_to_bus(address: skb->data); |
1021 | vp->tx_ring[entry].length = skb->len | 0x80000000; |
1022 | vp->tx_ring[entry].status = skb->len | 0x80000000; |
1023 | |
1024 | spin_lock_irqsave(&vp->lock, flags); |
1025 | outw(value: DownStall, port: ioaddr + EL3_CMD); |
1026 | /* Wait for the stall to complete. */ |
1027 | for (i = 20; i >= 0; i--) |
1028 | if ((inw(port: ioaddr + EL3_STATUS) & CmdInProgress) == 0) |
1029 | break; |
1030 | if (prev_entry) |
1031 | prev_entry->next = isa_virt_to_bus(address: &vp->tx_ring[entry]); |
1032 | if (inl(port: ioaddr + DownListPtr) == 0) { |
1033 | outl(value: isa_virt_to_bus(address: &vp->tx_ring[entry]), |
1034 | port: ioaddr + DownListPtr); |
1035 | queued_packet++; |
1036 | } |
1037 | outw(value: DownUnstall, port: ioaddr + EL3_CMD); |
1038 | spin_unlock_irqrestore(lock: &vp->lock, flags); |
1039 | |
1040 | vp->cur_tx++; |
1041 | if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) |
1042 | vp->tx_full = 1; |
1043 | else { /* Clear previous interrupt enable. */ |
1044 | if (prev_entry) |
1045 | prev_entry->status &= ~0x80000000; |
1046 | netif_wake_queue(dev); |
1047 | } |
1048 | return NETDEV_TX_OK; |
1049 | } |
1050 | /* Put out the doubleword header... */ |
1051 | outl(value: skb->len, port: ioaddr + TX_FIFO); |
1052 | dev->stats.tx_bytes += skb->len; |
1053 | #ifdef VORTEX_BUS_MASTER |
1054 | if (vp->bus_master) { |
1055 | /* Set the bus-master controller to transfer the packet. */ |
1056 | outl(value: isa_virt_to_bus(address: skb->data), port: ioaddr + Wn7_MasterAddr); |
1057 | outw(value: (skb->len + 3) & ~3, port: ioaddr + Wn7_MasterLen); |
1058 | vp->tx_skb = skb; |
1059 | outw(value: StartDMADown, port: ioaddr + EL3_CMD); |
1060 | /* queue will be woken at the DMADone interrupt. */ |
1061 | } else { |
1062 | /* ... and the packet rounded to a doubleword. */ |
1063 | outsl(port: ioaddr + TX_FIFO, addr: skb->data, count: (skb->len + 3) >> 2); |
1064 | dev_kfree_skb(skb); |
1065 | if (inw(port: ioaddr + TxFree) > 1536) { |
1066 | netif_wake_queue(dev); |
1067 | } else |
1068 | /* Interrupt us when the FIFO has room for max-sized packet. */ |
1069 | outw(value: SetTxThreshold + (1536 >> 2), |
1070 | port: ioaddr + EL3_CMD); |
1071 | } |
1072 | #else |
1073 | /* ... and the packet rounded to a doubleword. */ |
1074 | outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); |
1075 | dev_kfree_skb(skb); |
1076 | if (inw(ioaddr + TxFree) > 1536) { |
1077 | netif_wake_queue(dev); |
1078 | } else |
1079 | /* Interrupt us when the FIFO has room for max-sized packet. */ |
1080 | outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD); |
1081 | #endif /* bus master */ |
1082 | |
1083 | |
1084 | /* Clear the Tx status stack. */ |
1085 | { |
1086 | short tx_status; |
1087 | int i = 4; |
1088 | |
1089 | while (--i > 0 && (tx_status = inb(port: ioaddr + TxStatus)) > 0) { |
1090 | if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */ |
1091 | if (corkscrew_debug > 2) |
1092 | pr_debug("%s: Tx error, status %2.2x.\n" , |
1093 | dev->name, tx_status); |
1094 | if (tx_status & 0x04) |
1095 | dev->stats.tx_fifo_errors++; |
1096 | if (tx_status & 0x38) |
1097 | dev->stats.tx_aborted_errors++; |
1098 | if (tx_status & 0x30) { |
1099 | int j; |
1100 | outw(value: TxReset, port: ioaddr + EL3_CMD); |
1101 | for (j = 20; j >= 0; j--) |
1102 | if (!(inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
1103 | break; |
1104 | } |
1105 | outw(value: TxEnable, port: ioaddr + EL3_CMD); |
1106 | } |
1107 | outb(value: 0x00, port: ioaddr + TxStatus); /* Pop the status stack. */ |
1108 | } |
1109 | } |
1110 | return NETDEV_TX_OK; |
1111 | } |
1112 | |
1113 | /* The interrupt handler does all of the Rx thread work and cleans up |
1114 | after the Tx thread. */ |
1115 | |
1116 | static irqreturn_t corkscrew_interrupt(int irq, void *dev_id) |
1117 | { |
1118 | /* Use the now-standard shared IRQ implementation. */ |
1119 | struct net_device *dev = dev_id; |
1120 | struct corkscrew_private *lp = netdev_priv(dev); |
1121 | int ioaddr, status; |
1122 | int latency; |
1123 | int i = max_interrupt_work; |
1124 | |
1125 | ioaddr = dev->base_addr; |
1126 | latency = inb(port: ioaddr + Timer); |
1127 | |
1128 | spin_lock(lock: &lp->lock); |
1129 | |
1130 | status = inw(port: ioaddr + EL3_STATUS); |
1131 | |
1132 | if (corkscrew_debug > 4) |
1133 | pr_debug("%s: interrupt, status %4.4x, timer %d.\n" , |
1134 | dev->name, status, latency); |
1135 | if ((status & 0xE000) != 0xE000) { |
1136 | static int donedidthis; |
1137 | /* Some interrupt controllers store a bogus interrupt from boot-time. |
1138 | Ignore a single early interrupt, but don't hang the machine for |
1139 | other interrupt problems. */ |
1140 | if (donedidthis++ > 100) { |
1141 | pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n" , |
1142 | dev->name, status, netif_running(dev)); |
1143 | free_irq(dev->irq, dev); |
1144 | dev->irq = -1; |
1145 | } |
1146 | } |
1147 | |
1148 | do { |
1149 | if (corkscrew_debug > 5) |
1150 | pr_debug("%s: In interrupt loop, status %4.4x.\n" , |
1151 | dev->name, status); |
1152 | if (status & RxComplete) |
1153 | corkscrew_rx(dev); |
1154 | |
1155 | if (status & TxAvailable) { |
1156 | if (corkscrew_debug > 5) |
1157 | pr_debug(" TX room bit was handled.\n" ); |
1158 | /* There's room in the FIFO for a full-sized packet. */ |
1159 | outw(value: AckIntr | TxAvailable, port: ioaddr + EL3_CMD); |
1160 | netif_wake_queue(dev); |
1161 | } |
1162 | if (status & DownComplete) { |
1163 | unsigned int dirty_tx = lp->dirty_tx; |
1164 | |
1165 | while (lp->cur_tx - dirty_tx > 0) { |
1166 | int entry = dirty_tx % TX_RING_SIZE; |
1167 | if (inl(port: ioaddr + DownListPtr) == isa_virt_to_bus(address: &lp->tx_ring[entry])) |
1168 | break; /* It still hasn't been processed. */ |
1169 | if (lp->tx_skbuff[entry]) { |
1170 | dev_consume_skb_irq(skb: lp->tx_skbuff[entry]); |
1171 | lp->tx_skbuff[entry] = NULL; |
1172 | } |
1173 | dirty_tx++; |
1174 | } |
1175 | lp->dirty_tx = dirty_tx; |
1176 | outw(value: AckIntr | DownComplete, port: ioaddr + EL3_CMD); |
1177 | if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) { |
1178 | lp->tx_full = 0; |
1179 | netif_wake_queue(dev); |
1180 | } |
1181 | } |
1182 | #ifdef VORTEX_BUS_MASTER |
1183 | if (status & DMADone) { |
1184 | outw(value: 0x1000, port: ioaddr + Wn7_MasterStatus); /* Ack the event. */ |
1185 | dev_consume_skb_irq(skb: lp->tx_skb); /* Release the transferred buffer */ |
1186 | netif_wake_queue(dev); |
1187 | } |
1188 | #endif |
1189 | if (status & UpComplete) { |
1190 | boomerang_rx(dev); |
1191 | outw(value: AckIntr | UpComplete, port: ioaddr + EL3_CMD); |
1192 | } |
1193 | if (status & (AdapterFailure | RxEarly | StatsFull)) { |
1194 | /* Handle all uncommon interrupts at once. */ |
1195 | if (status & RxEarly) { /* Rx early is unused. */ |
1196 | corkscrew_rx(dev); |
1197 | outw(value: AckIntr | RxEarly, port: ioaddr + EL3_CMD); |
1198 | } |
1199 | if (status & StatsFull) { /* Empty statistics. */ |
1200 | static int DoneDidThat; |
1201 | if (corkscrew_debug > 4) |
1202 | pr_debug("%s: Updating stats.\n" , dev->name); |
1203 | update_stats(addr: ioaddr, dev); |
1204 | /* DEBUG HACK: Disable statistics as an interrupt source. */ |
1205 | /* This occurs when we have the wrong media type! */ |
1206 | if (DoneDidThat == 0 && inw(port: ioaddr + EL3_STATUS) & StatsFull) { |
1207 | int win, reg; |
1208 | pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n" , |
1209 | dev->name); |
1210 | for (win = 0; win < 8; win++) { |
1211 | EL3WINDOW(win); |
1212 | pr_notice("Vortex window %d:" , win); |
1213 | for (reg = 0; reg < 16; reg++) |
1214 | pr_cont(" %2.2x" , inb(ioaddr + reg)); |
1215 | pr_cont("\n" ); |
1216 | } |
1217 | EL3WINDOW(7); |
1218 | outw(value: SetIntrEnb | TxAvailable | |
1219 | RxComplete | AdapterFailure | |
1220 | UpComplete | DownComplete | |
1221 | TxComplete, port: ioaddr + EL3_CMD); |
1222 | DoneDidThat++; |
1223 | } |
1224 | } |
1225 | if (status & AdapterFailure) { |
1226 | /* Adapter failure requires Rx reset and reinit. */ |
1227 | outw(value: RxReset, port: ioaddr + EL3_CMD); |
1228 | /* Set the Rx filter to the current state. */ |
1229 | set_rx_mode(dev); |
1230 | outw(value: RxEnable, port: ioaddr + EL3_CMD); /* Re-enable the receiver. */ |
1231 | outw(value: AckIntr | AdapterFailure, |
1232 | port: ioaddr + EL3_CMD); |
1233 | } |
1234 | } |
1235 | |
1236 | if (--i < 0) { |
1237 | pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n" , |
1238 | dev->name, status, SetStatusEnb | ((~status) & 0x7FE)); |
1239 | /* Disable all pending interrupts. */ |
1240 | outw(value: SetStatusEnb | ((~status) & 0x7FE), port: ioaddr + EL3_CMD); |
1241 | outw(value: AckIntr | 0x7FF, port: ioaddr + EL3_CMD); |
1242 | break; |
1243 | } |
1244 | /* Acknowledge the IRQ. */ |
1245 | outw(value: AckIntr | IntReq | IntLatch, port: ioaddr + EL3_CMD); |
1246 | |
1247 | } while ((status = inw(port: ioaddr + EL3_STATUS)) & (IntLatch | RxComplete)); |
1248 | |
1249 | spin_unlock(lock: &lp->lock); |
1250 | |
1251 | if (corkscrew_debug > 4) |
1252 | pr_debug("%s: exiting interrupt, status %4.4x.\n" , dev->name, status); |
1253 | return IRQ_HANDLED; |
1254 | } |
1255 | |
1256 | static int corkscrew_rx(struct net_device *dev) |
1257 | { |
1258 | int ioaddr = dev->base_addr; |
1259 | int i; |
1260 | short rx_status; |
1261 | |
1262 | if (corkscrew_debug > 5) |
1263 | pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n" , |
1264 | inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); |
1265 | while ((rx_status = inw(port: ioaddr + RxStatus)) > 0) { |
1266 | if (rx_status & 0x4000) { /* Error, update stats. */ |
1267 | unsigned char rx_error = inb(port: ioaddr + RxErrors); |
1268 | if (corkscrew_debug > 2) |
1269 | pr_debug(" Rx error: status %2.2x.\n" , |
1270 | rx_error); |
1271 | dev->stats.rx_errors++; |
1272 | if (rx_error & 0x01) |
1273 | dev->stats.rx_over_errors++; |
1274 | if (rx_error & 0x02) |
1275 | dev->stats.rx_length_errors++; |
1276 | if (rx_error & 0x04) |
1277 | dev->stats.rx_frame_errors++; |
1278 | if (rx_error & 0x08) |
1279 | dev->stats.rx_crc_errors++; |
1280 | if (rx_error & 0x10) |
1281 | dev->stats.rx_length_errors++; |
1282 | } else { |
1283 | /* The packet length: up to 4.5K!. */ |
1284 | short pkt_len = rx_status & 0x1fff; |
1285 | struct sk_buff *skb; |
1286 | |
1287 | skb = netdev_alloc_skb(dev, length: pkt_len + 5 + 2); |
1288 | if (corkscrew_debug > 4) |
1289 | pr_debug("Receiving packet size %d status %4.4x.\n" , |
1290 | pkt_len, rx_status); |
1291 | if (skb != NULL) { |
1292 | skb_reserve(skb, len: 2); /* Align IP on 16 byte boundaries */ |
1293 | /* 'skb_put()' points to the start of sk_buff data area. */ |
1294 | insl(port: ioaddr + RX_FIFO, |
1295 | addr: skb_put(skb, len: pkt_len), |
1296 | count: (pkt_len + 3) >> 2); |
1297 | outw(value: RxDiscard, port: ioaddr + EL3_CMD); /* Pop top Rx packet. */ |
1298 | skb->protocol = eth_type_trans(skb, dev); |
1299 | netif_rx(skb); |
1300 | dev->stats.rx_packets++; |
1301 | dev->stats.rx_bytes += pkt_len; |
1302 | /* Wait a limited time to go to next packet. */ |
1303 | for (i = 200; i >= 0; i--) |
1304 | if (! (inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
1305 | break; |
1306 | continue; |
1307 | } else if (corkscrew_debug) |
1308 | pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n" , dev->name, pkt_len); |
1309 | } |
1310 | outw(value: RxDiscard, port: ioaddr + EL3_CMD); |
1311 | dev->stats.rx_dropped++; |
1312 | /* Wait a limited time to skip this packet. */ |
1313 | for (i = 200; i >= 0; i--) |
1314 | if (!(inw(port: ioaddr + EL3_STATUS) & CmdInProgress)) |
1315 | break; |
1316 | } |
1317 | return 0; |
1318 | } |
1319 | |
1320 | static int boomerang_rx(struct net_device *dev) |
1321 | { |
1322 | struct corkscrew_private *vp = netdev_priv(dev); |
1323 | int entry = vp->cur_rx % RX_RING_SIZE; |
1324 | int ioaddr = dev->base_addr; |
1325 | int rx_status; |
1326 | |
1327 | if (corkscrew_debug > 5) |
1328 | pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n" , |
1329 | inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus)); |
1330 | while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) { |
1331 | if (rx_status & RxDError) { /* Error, update stats. */ |
1332 | unsigned char rx_error = rx_status >> 16; |
1333 | if (corkscrew_debug > 2) |
1334 | pr_debug(" Rx error: status %2.2x.\n" , |
1335 | rx_error); |
1336 | dev->stats.rx_errors++; |
1337 | if (rx_error & 0x01) |
1338 | dev->stats.rx_over_errors++; |
1339 | if (rx_error & 0x02) |
1340 | dev->stats.rx_length_errors++; |
1341 | if (rx_error & 0x04) |
1342 | dev->stats.rx_frame_errors++; |
1343 | if (rx_error & 0x08) |
1344 | dev->stats.rx_crc_errors++; |
1345 | if (rx_error & 0x10) |
1346 | dev->stats.rx_length_errors++; |
1347 | } else { |
1348 | /* The packet length: up to 4.5K!. */ |
1349 | short pkt_len = rx_status & 0x1fff; |
1350 | struct sk_buff *skb; |
1351 | |
1352 | dev->stats.rx_bytes += pkt_len; |
1353 | if (corkscrew_debug > 4) |
1354 | pr_debug("Receiving packet size %d status %4.4x.\n" , |
1355 | pkt_len, rx_status); |
1356 | |
1357 | /* Check if the packet is long enough to just accept without |
1358 | copying to a properly sized skbuff. */ |
1359 | if (pkt_len < rx_copybreak && |
1360 | (skb = netdev_alloc_skb(dev, length: pkt_len + 4)) != NULL) { |
1361 | skb_reserve(skb, len: 2); /* Align IP on 16 byte boundaries */ |
1362 | /* 'skb_put()' points to the start of sk_buff data area. */ |
1363 | skb_put_data(skb, |
1364 | isa_bus_to_virt(address: vp->rx_ring[entry].addr), |
1365 | len: pkt_len); |
1366 | rx_copy++; |
1367 | } else { |
1368 | void *temp; |
1369 | /* Pass up the skbuff already on the Rx ring. */ |
1370 | skb = vp->rx_skbuff[entry]; |
1371 | vp->rx_skbuff[entry] = NULL; |
1372 | temp = skb_put(skb, len: pkt_len); |
1373 | /* Remove this checking code for final release. */ |
1374 | if (isa_bus_to_virt(address: vp->rx_ring[entry].addr) != temp) |
1375 | pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n" , |
1376 | dev->name, |
1377 | isa_bus_to_virt(vp->rx_ring[entry].addr), |
1378 | skb->head, temp); |
1379 | rx_nocopy++; |
1380 | } |
1381 | skb->protocol = eth_type_trans(skb, dev); |
1382 | netif_rx(skb); |
1383 | dev->stats.rx_packets++; |
1384 | } |
1385 | entry = (++vp->cur_rx) % RX_RING_SIZE; |
1386 | } |
1387 | /* Refill the Rx ring buffers. */ |
1388 | for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) { |
1389 | struct sk_buff *skb; |
1390 | entry = vp->dirty_rx % RX_RING_SIZE; |
1391 | if (vp->rx_skbuff[entry] == NULL) { |
1392 | skb = netdev_alloc_skb(dev, PKT_BUF_SZ); |
1393 | if (skb == NULL) |
1394 | break; /* Bad news! */ |
1395 | skb_reserve(skb, len: 2); /* Align IP on 16 byte boundaries */ |
1396 | vp->rx_ring[entry].addr = isa_virt_to_bus(address: skb->data); |
1397 | vp->rx_skbuff[entry] = skb; |
1398 | } |
1399 | vp->rx_ring[entry].status = 0; /* Clear complete bit. */ |
1400 | } |
1401 | return 0; |
1402 | } |
1403 | |
1404 | static int corkscrew_close(struct net_device *dev) |
1405 | { |
1406 | struct corkscrew_private *vp = netdev_priv(dev); |
1407 | int ioaddr = dev->base_addr; |
1408 | int i; |
1409 | |
1410 | netif_stop_queue(dev); |
1411 | |
1412 | if (corkscrew_debug > 1) { |
1413 | pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n" , |
1414 | dev->name, inw(ioaddr + EL3_STATUS), |
1415 | inb(ioaddr + TxStatus)); |
1416 | pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n" , |
1417 | dev->name, rx_nocopy, rx_copy, queued_packet); |
1418 | } |
1419 | |
1420 | del_timer_sync(timer: &vp->timer); |
1421 | |
1422 | /* Turn off statistics ASAP. We update lp->stats below. */ |
1423 | outw(value: StatsDisable, port: ioaddr + EL3_CMD); |
1424 | |
1425 | /* Disable the receiver and transmitter. */ |
1426 | outw(value: RxDisable, port: ioaddr + EL3_CMD); |
1427 | outw(value: TxDisable, port: ioaddr + EL3_CMD); |
1428 | |
1429 | if (dev->if_port == XCVR_10base2) |
1430 | /* Turn off thinnet power. Green! */ |
1431 | outw(value: StopCoax, port: ioaddr + EL3_CMD); |
1432 | |
1433 | free_irq(dev->irq, dev); |
1434 | |
1435 | outw(value: SetIntrEnb | 0x0000, port: ioaddr + EL3_CMD); |
1436 | |
1437 | update_stats(addr: ioaddr, dev); |
1438 | if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */ |
1439 | outl(value: 0, port: ioaddr + UpListPtr); |
1440 | for (i = 0; i < RX_RING_SIZE; i++) |
1441 | if (vp->rx_skbuff[i]) { |
1442 | dev_kfree_skb(vp->rx_skbuff[i]); |
1443 | vp->rx_skbuff[i] = NULL; |
1444 | } |
1445 | } |
1446 | if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */ |
1447 | outl(value: 0, port: ioaddr + DownListPtr); |
1448 | for (i = 0; i < TX_RING_SIZE; i++) |
1449 | if (vp->tx_skbuff[i]) { |
1450 | dev_kfree_skb(vp->tx_skbuff[i]); |
1451 | vp->tx_skbuff[i] = NULL; |
1452 | } |
1453 | } |
1454 | |
1455 | return 0; |
1456 | } |
1457 | |
1458 | static struct net_device_stats *corkscrew_get_stats(struct net_device *dev) |
1459 | { |
1460 | struct corkscrew_private *vp = netdev_priv(dev); |
1461 | unsigned long flags; |
1462 | |
1463 | if (netif_running(dev)) { |
1464 | spin_lock_irqsave(&vp->lock, flags); |
1465 | update_stats(addr: dev->base_addr, dev); |
1466 | spin_unlock_irqrestore(lock: &vp->lock, flags); |
1467 | } |
1468 | return &dev->stats; |
1469 | } |
1470 | |
1471 | /* Update statistics. |
1472 | Unlike with the EL3 we need not worry about interrupts changing |
1473 | the window setting from underneath us, but we must still guard |
1474 | against a race condition with a StatsUpdate interrupt updating the |
1475 | table. This is done by checking that the ASM (!) code generated uses |
1476 | atomic updates with '+='. |
1477 | */ |
1478 | static void update_stats(int ioaddr, struct net_device *dev) |
1479 | { |
1480 | /* Unlike the 3c5x9 we need not turn off stats updates while reading. */ |
1481 | /* Switch to the stats window, and read everything. */ |
1482 | EL3WINDOW(6); |
1483 | dev->stats.tx_carrier_errors += inb(port: ioaddr + 0); |
1484 | dev->stats.tx_heartbeat_errors += inb(port: ioaddr + 1); |
1485 | /* Multiple collisions. */ inb(port: ioaddr + 2); |
1486 | dev->stats.collisions += inb(port: ioaddr + 3); |
1487 | dev->stats.tx_window_errors += inb(port: ioaddr + 4); |
1488 | dev->stats.rx_fifo_errors += inb(port: ioaddr + 5); |
1489 | dev->stats.tx_packets += inb(port: ioaddr + 6); |
1490 | dev->stats.tx_packets += (inb(port: ioaddr + 9) & 0x30) << 4; |
1491 | /* Rx packets */ inb(port: ioaddr + 7); |
1492 | /* Must read to clear */ |
1493 | /* Tx deferrals */ inb(port: ioaddr + 8); |
1494 | /* Don't bother with register 9, an extension of registers 6&7. |
1495 | If we do use the 6&7 values the atomic update assumption above |
1496 | is invalid. */ |
1497 | inw(port: ioaddr + 10); /* Total Rx and Tx octets. */ |
1498 | inw(port: ioaddr + 12); |
1499 | /* New: On the Vortex we must also clear the BadSSD counter. */ |
1500 | EL3WINDOW(4); |
1501 | inb(port: ioaddr + 12); |
1502 | |
1503 | /* We change back to window 7 (not 1) with the Vortex. */ |
1504 | EL3WINDOW(7); |
1505 | } |
1506 | |
1507 | /* This new version of set_rx_mode() supports v1.4 kernels. |
1508 | The Vortex chip has no documented multicast filter, so the only |
1509 | multicast setting is to receive all multicast frames. At least |
1510 | the chip has a very clean way to set the mode, unlike many others. */ |
1511 | static void set_rx_mode(struct net_device *dev) |
1512 | { |
1513 | int ioaddr = dev->base_addr; |
1514 | unsigned short new_mode; |
1515 | |
1516 | if (dev->flags & IFF_PROMISC) { |
1517 | if (corkscrew_debug > 3) |
1518 | pr_debug("%s: Setting promiscuous mode.\n" , |
1519 | dev->name); |
1520 | new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm; |
1521 | } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) { |
1522 | new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast; |
1523 | } else |
1524 | new_mode = SetRxFilter | RxStation | RxBroadcast; |
1525 | |
1526 | outw(value: new_mode, port: ioaddr + EL3_CMD); |
1527 | } |
1528 | |
1529 | static void netdev_get_drvinfo(struct net_device *dev, |
1530 | struct ethtool_drvinfo *info) |
1531 | { |
1532 | strscpy(p: info->driver, DRV_NAME, size: sizeof(info->driver)); |
1533 | snprintf(buf: info->bus_info, size: sizeof(info->bus_info), fmt: "ISA 0x%lx" , |
1534 | dev->base_addr); |
1535 | } |
1536 | |
1537 | static u32 netdev_get_msglevel(struct net_device *dev) |
1538 | { |
1539 | return corkscrew_debug; |
1540 | } |
1541 | |
1542 | static void netdev_set_msglevel(struct net_device *dev, u32 level) |
1543 | { |
1544 | corkscrew_debug = level; |
1545 | } |
1546 | |
1547 | static const struct ethtool_ops netdev_ethtool_ops = { |
1548 | .get_drvinfo = netdev_get_drvinfo, |
1549 | .get_msglevel = netdev_get_msglevel, |
1550 | .set_msglevel = netdev_set_msglevel, |
1551 | }; |
1552 | |
1553 | |
1554 | #ifdef MODULE |
1555 | void cleanup_module(void) |
1556 | { |
1557 | while (!list_empty(&root_corkscrew_dev)) { |
1558 | struct net_device *dev; |
1559 | struct corkscrew_private *vp; |
1560 | |
1561 | vp = list_entry(root_corkscrew_dev.next, |
1562 | struct corkscrew_private, list); |
1563 | dev = vp->our_dev; |
1564 | unregister_netdev(dev); |
1565 | cleanup_card(dev); |
1566 | free_netdev(dev); |
1567 | } |
1568 | } |
1569 | #endif /* MODULE */ |
1570 | |