1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * Linux network driver for QLogic BR-series Converged Network Adapter.
4 */
5/*
6 * Copyright (c) 2005-2014 Brocade Communications Systems, Inc.
7 * Copyright (c) 2014-2015 QLogic Corporation
8 * All rights reserved
9 * www.qlogic.com
10 */
11
12/*
13 * bfi_reg.h ASIC register defines for all QLogic BR-series adapter ASICs
14 */
15
16#ifndef __BFI_REG_H__
17#define __BFI_REG_H__
18
19#define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */
20#define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */
21#define HOSTFN2_INT_STATUS 0x00014300 /* ct */
22#define HOSTFN3_INT_STATUS 0x00014400 /* ct */
23#define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */
24#define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */
25#define HOSTFN2_INT_MSK 0x00014304 /* ct */
26#define HOSTFN3_INT_MSK 0x00014404 /* ct */
27
28#define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */
29#define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */
30#define HOST_PAGE_NUM_FN2 0x00014308 /* ct */
31#define HOST_PAGE_NUM_FN3 0x00014408 /* ct */
32
33#define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */
34#define __P_LCLK_PLL_LOCK 0x80000000
35#define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000
36#define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000
37#define __APP_PLL_LCLK_RESET_TIMER_SH 17
38#define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
39#define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000
40#define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000
41#define __APP_PLL_LCLK_CNTLMT0_1_SH 14
42#define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
43#define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000
44#define __APP_PLL_LCLK_JITLMT0_1_SH 12
45#define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
46#define __APP_PLL_LCLK_HREF 0x00000800
47#define __APP_PLL_LCLK_HDIV 0x00000400
48#define __APP_PLL_LCLK_P0_1_MK 0x00000300
49#define __APP_PLL_LCLK_P0_1_SH 8
50#define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH)
51#define __APP_PLL_LCLK_Z0_2_MK 0x000000e0
52#define __APP_PLL_LCLK_Z0_2_SH 5
53#define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH)
54#define __APP_PLL_LCLK_RSEL200500 0x00000010
55#define __APP_PLL_LCLK_ENARST 0x00000008
56#define __APP_PLL_LCLK_BYPASS 0x00000004
57#define __APP_PLL_LCLK_LRESETN 0x00000002
58#define __APP_PLL_LCLK_ENABLE 0x00000001
59#define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */
60#define __P_SCLK_PLL_LOCK 0x80000000
61#define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000
62#define __APP_PLL_SCLK_RESET_TIMER_SH 17
63#define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
64#define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000
65#define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000
66#define __APP_PLL_SCLK_CNTLMT0_1_SH 14
67#define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
68#define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000
69#define __APP_PLL_SCLK_JITLMT0_1_SH 12
70#define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
71#define __APP_PLL_SCLK_HREF 0x00000800
72#define __APP_PLL_SCLK_HDIV 0x00000400
73#define __APP_PLL_SCLK_P0_1_MK 0x00000300
74#define __APP_PLL_SCLK_P0_1_SH 8
75#define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH)
76#define __APP_PLL_SCLK_Z0_2_MK 0x000000e0
77#define __APP_PLL_SCLK_Z0_2_SH 5
78#define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH)
79#define __APP_PLL_SCLK_RSEL200500 0x00000010
80#define __APP_PLL_SCLK_ENARST 0x00000008
81#define __APP_PLL_SCLK_BYPASS 0x00000004
82#define __APP_PLL_SCLK_LRESETN 0x00000002
83#define __APP_PLL_SCLK_ENABLE 0x00000001
84#define __ENABLE_MAC_AHB_1 0x00800000 /* ct */
85#define __ENABLE_MAC_AHB_0 0x00400000 /* ct */
86#define __ENABLE_MAC_1 0x00200000 /* ct */
87#define __ENABLE_MAC_0 0x00100000 /* ct */
88
89#define HOST_SEM0_REG 0x00014230 /* cb/ct */
90#define HOST_SEM1_REG 0x00014234 /* cb/ct */
91#define HOST_SEM2_REG 0x00014238 /* cb/ct */
92#define HOST_SEM3_REG 0x0001423c /* cb/ct */
93#define HOST_SEM4_REG 0x00014610 /* cb/ct */
94#define HOST_SEM5_REG 0x00014614 /* cb/ct */
95#define HOST_SEM6_REG 0x00014618 /* cb/ct */
96#define HOST_SEM7_REG 0x0001461c /* cb/ct */
97#define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */
98#define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */
99#define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */
100#define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */
101#define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */
102#define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */
103#define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */
104#define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */
105
106#define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */
107#define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */
108#define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */
109#define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */
110#define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */
111#define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */
112#define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */
113#define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */
114#define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */
115#define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */
116#define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */
117#define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */
118#define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */
119#define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */
120#define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */
121#define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */
122
123#define PSS_CTL_REG 0x00018800 /* cb/ct */
124#define __PSS_I2C_CLK_DIV_MK 0x007f0000
125#define __PSS_I2C_CLK_DIV_SH 16
126#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
127#define __PSS_LMEM_INIT_DONE 0x00001000
128#define __PSS_LMEM_RESET 0x00000200
129#define __PSS_LMEM_INIT_EN 0x00000100
130#define __PSS_LPU1_RESET 0x00000002
131#define __PSS_LPU0_RESET 0x00000001
132#define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */
133#define ERR_SET_REG 0x00018818 /* cb/ct */
134#define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */
135#define __PSS_GPIO_OUT_REG 0x00000fff
136#define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */
137#define __PSS_GPIO_OE_REG 0x000000ff
138
139#define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */
140#define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */
141#define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */
142#define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */
143#define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */
144#define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */
145#define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */
146#define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */
147
148#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */
149#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */
150#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */
151#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */
152
153#define MBIST_CTL_REG 0x00014220 /* ct */
154#define __EDRAM_BISTR_START 0x00000004
155#define MBIST_STAT_REG 0x00014224 /* ct */
156#define ETH_MAC_SER_REG 0x00014288 /* ct */
157#define __APP_EMS_CKBUFAMPIN 0x00000020
158#define __APP_EMS_REFCLKSEL 0x00000010
159#define __APP_EMS_CMLCKSEL 0x00000008
160#define __APP_EMS_REFCKBUFEN2 0x00000004
161#define __APP_EMS_REFCKBUFEN1 0x00000002
162#define __APP_EMS_CHANNEL_SEL 0x00000001
163#define FNC_PERS_REG 0x00014604 /* ct */
164#define __F3_FUNCTION_ACTIVE 0x80000000
165#define __F3_FUNCTION_MODE 0x40000000
166#define __F3_PORT_MAP_MK 0x30000000
167#define __F3_PORT_MAP_SH 28
168#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
169#define __F3_VM_MODE 0x08000000
170#define __F3_INTX_STATUS_MK 0x07000000
171#define __F3_INTX_STATUS_SH 24
172#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
173#define __F2_FUNCTION_ACTIVE 0x00800000
174#define __F2_FUNCTION_MODE 0x00400000
175#define __F2_PORT_MAP_MK 0x00300000
176#define __F2_PORT_MAP_SH 20
177#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
178#define __F2_VM_MODE 0x00080000
179#define __F2_INTX_STATUS_MK 0x00070000
180#define __F2_INTX_STATUS_SH 16
181#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
182#define __F1_FUNCTION_ACTIVE 0x00008000
183#define __F1_FUNCTION_MODE 0x00004000
184#define __F1_PORT_MAP_MK 0x00003000
185#define __F1_PORT_MAP_SH 12
186#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
187#define __F1_VM_MODE 0x00000800
188#define __F1_INTX_STATUS_MK 0x00000700
189#define __F1_INTX_STATUS_SH 8
190#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
191#define __F0_FUNCTION_ACTIVE 0x00000080
192#define __F0_FUNCTION_MODE 0x00000040
193#define __F0_PORT_MAP_MK 0x00000030
194#define __F0_PORT_MAP_SH 4
195#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
196#define __F0_VM_MODE 0x00000008
197#define __F0_INTX_STATUS 0x00000007
198enum {
199 __F0_INTX_STATUS_MSIX = 0x0,
200 __F0_INTX_STATUS_INTA = 0x1,
201 __F0_INTX_STATUS_INTB = 0x2,
202 __F0_INTX_STATUS_INTC = 0x3,
203 __F0_INTX_STATUS_INTD = 0x4,
204};
205
206#define OP_MODE 0x0001460c
207#define __APP_ETH_CLK_LOWSPEED 0x00000004
208#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
209#define __GLOBAL_FCOE_MODE 0x00000001
210#define FW_INIT_HALT_P0 0x000191ac
211#define __FW_INIT_HALT_P 0x00000001
212#define FW_INIT_HALT_P1 0x000191bc
213#define PMM_1T_RESET_REG_P0 0x0002381c
214#define __PMM_1T_RESET_P 0x00000001
215#define PMM_1T_RESET_REG_P1 0x00023c1c
216
217/* QLogic BR-series 1860 Adapter specific defines */
218#define CT2_PCI_CPQ_BASE 0x00030000
219#define CT2_PCI_APP_BASE 0x00030100
220#define CT2_PCI_ETH_BASE 0x00030400
221
222/*
223 * APP block registers
224 */
225#define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00)
226#define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04)
227#define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08)
228#define __PME_STATUS_ 0x00200000
229#define __PF_VF_BAR_SIZE_MODE__MK 0x00180000
230#define __PF_VF_BAR_SIZE_MODE__SH 19
231#define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH)
232#define __FC_LL_PORT_MAP__MK 0x00060000
233#define __FC_LL_PORT_MAP__SH 17
234#define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH)
235#define __PF_VF_ACTIVE_ 0x00010000
236#define __PF_VF_CFG_RDY_ 0x00008000
237#define __PF_VF_ENABLE_ 0x00004000
238#define __PF_DRIVER_ACTIVE_ 0x00002000
239#define __PF_PME_SEND_ENABLE_ 0x00001000
240#define __PF_EXROM_OFFSET__MK 0x00000ff0
241#define __PF_EXROM_OFFSET__SH 4
242#define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH)
243#define __FC_LL_MODE_ 0x00000008
244#define __PF_INTX_PIN_ 0x00000007
245#define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C)
246#define __PF_NUM_QUEUES1__MK 0xff000000
247#define __PF_NUM_QUEUES1__SH 24
248#define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH)
249#define __PF_VF_QUE_OFFSET1__MK 0x00ff0000
250#define __PF_VF_QUE_OFFSET1__SH 16
251#define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH)
252#define __PF_VF_NUM_QUEUES__MK 0x0000ff00
253#define __PF_VF_NUM_QUEUES__SH 8
254#define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH)
255#define __PF_VF_QUE_OFFSET_ 0x000000ff
256#define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18)
257#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38)
258
259/*
260 * QLogic BR-series 1860 adapter CPQ block registers
261 */
262#define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00)
263#define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20)
264#define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40)
265#define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60)
266#define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80)
267#define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84)
268#define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88)
269#define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c)
270#define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90)
271#define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94)
272#define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98)
273#define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C)
274#define CT2_HOST_SEM0_REG 0x000148f0
275#define CT2_HOST_SEM1_REG 0x000148f4
276#define CT2_HOST_SEM2_REG 0x000148f8
277#define CT2_HOST_SEM3_REG 0x000148fc
278#define CT2_HOST_SEM4_REG 0x00014900
279#define CT2_HOST_SEM5_REG 0x00014904
280#define CT2_HOST_SEM6_REG 0x00014908
281#define CT2_HOST_SEM7_REG 0x0001490c
282#define CT2_HOST_SEM0_INFO_REG 0x000148b0
283#define CT2_HOST_SEM1_INFO_REG 0x000148b4
284#define CT2_HOST_SEM2_INFO_REG 0x000148b8
285#define CT2_HOST_SEM3_INFO_REG 0x000148bc
286#define CT2_HOST_SEM4_INFO_REG 0x000148c0
287#define CT2_HOST_SEM5_INFO_REG 0x000148c4
288#define CT2_HOST_SEM6_INFO_REG 0x000148c8
289#define CT2_HOST_SEM7_INFO_REG 0x000148cc
290
291#define CT2_APP_PLL_LCLK_CTL_REG 0x00014808
292#define __APP_LPUCLK_HALFSPEED 0x40000000
293#define __APP_PLL_LCLK_LOAD 0x20000000
294#define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000
295#define __APP_PLL_LCLK_FBCNT_SH 21
296#define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
297enum {
298 __APP_PLL_LCLK_FBCNT_425_MHZ = 6,
299 __APP_PLL_LCLK_FBCNT_468_MHZ = 4,
300};
301#define __APP_PLL_LCLK_EXTFB 0x00000800
302#define __APP_PLL_LCLK_ENOUTS 0x00000400
303#define __APP_PLL_LCLK_RATE 0x00000010
304#define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c
305#define __P_SCLK_PLL_LOCK 0x80000000
306#define __APP_PLL_SCLK_REFCLK_SEL 0x40000000
307#define __APP_PLL_SCLK_CLK_DIV2 0x20000000
308#define __APP_PLL_SCLK_LOAD 0x10000000
309#define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000
310#define __APP_PLL_SCLK_FBCNT_SH 20
311#define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
312enum {
313 __APP_PLL_SCLK_FBCNT_NORM = 6,
314 __APP_PLL_SCLK_FBCNT_10G_FC = 10,
315};
316#define __APP_PLL_SCLK_EXTFB 0x00000800
317#define __APP_PLL_SCLK_ENOUTS 0x00000400
318#define __APP_PLL_SCLK_RATE 0x00000010
319#define CT2_PCIE_MISC_REG 0x00014804
320#define __ETH_CLK_ENABLE_PORT1 0x00000010
321#define CT2_CHIP_MISC_PRG 0x000148a4
322#define __ETH_CLK_ENABLE_PORT0 0x00004000
323#define __APP_LPU_SPEED 0x00000002
324#define CT2_MBIST_STAT_REG 0x00014818
325#define CT2_MBIST_CTL_REG 0x0001481c
326#define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c
327#define __PMM_1T_PNDB_P 0x00000002
328#define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c
329#define CT2_WGN_STATUS 0x00014990
330#define __A2T_AHB_LOAD 0x00000800
331#define __WGN_READY 0x00000400
332#define __GLBL_PF_VF_CFG_RDY 0x00000200
333#define CT2_NFC_CSR_CLR_REG 0x00027420
334#define CT2_NFC_CSR_SET_REG 0x00027424
335#define __HALT_NFC_CONTROLLER 0x00000002
336#define __NFC_CONTROLLER_HALTED 0x00001000
337
338#define CT2_RSC_GPR15_REG 0x0002765c
339#define CT2_CSI_FW_CTL_REG 0x00027080
340#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000
341#define CT2_CSI_FW_CTL_SET_REG 0x00027088
342
343#define CT2_CSI_MAC0_CONTROL_REG 0x000270d0
344#define __CSI_MAC_RESET 0x00000010
345#define __CSI_MAC_AHB_RESET 0x00000008
346#define CT2_CSI_MAC1_CONTROL_REG 0x000270d4
347#define CT2_CSI_MAC_CONTROL_REG(__n) \
348 (CT2_CSI_MAC0_CONTROL_REG + \
349 (__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
350
351/*
352 * Name semaphore registers based on usage
353 */
354#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
355#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
356#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
357#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
358#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
359#define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG
360
361/*
362 * CT2 semaphore register locations changed
363 */
364#define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG
365#define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG
366#define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG
367#define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG
368#define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG
369#define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG
370
371#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
372#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
373
374/*
375 * And corresponding host interrupt status bit field defines
376 */
377#define __HFN_INT_CPE_Q0 0x00000001U
378#define __HFN_INT_CPE_Q1 0x00000002U
379#define __HFN_INT_CPE_Q2 0x00000004U
380#define __HFN_INT_CPE_Q3 0x00000008U
381#define __HFN_INT_CPE_Q4 0x00000010U
382#define __HFN_INT_CPE_Q5 0x00000020U
383#define __HFN_INT_CPE_Q6 0x00000040U
384#define __HFN_INT_CPE_Q7 0x00000080U
385#define __HFN_INT_RME_Q0 0x00000100U
386#define __HFN_INT_RME_Q1 0x00000200U
387#define __HFN_INT_RME_Q2 0x00000400U
388#define __HFN_INT_RME_Q3 0x00000800U
389#define __HFN_INT_RME_Q4 0x00001000U
390#define __HFN_INT_RME_Q5 0x00002000U
391#define __HFN_INT_RME_Q6 0x00004000U
392#define __HFN_INT_RME_Q7 0x00008000U
393#define __HFN_INT_ERR_EMC 0x00010000U
394#define __HFN_INT_ERR_LPU0 0x00020000U
395#define __HFN_INT_ERR_LPU1 0x00040000U
396#define __HFN_INT_ERR_PSS 0x00080000U
397#define __HFN_INT_MBOX_LPU0 0x00100000U
398#define __HFN_INT_MBOX_LPU1 0x00200000U
399#define __HFN_INT_MBOX1_LPU0 0x00400000U
400#define __HFN_INT_MBOX1_LPU1 0x00800000U
401#define __HFN_INT_LL_HALT 0x01000000U
402#define __HFN_INT_CPE_MASK 0x000000ffU
403#define __HFN_INT_RME_MASK 0x0000ff00U
404#define __HFN_INT_ERR_MASK \
405 (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
406 __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
407#define __HFN_INT_FN0_MASK \
408 (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
409 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
410 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
411#define __HFN_INT_FN1_MASK \
412 (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
413 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
414 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
415
416/*
417 * Host interrupt status defines for 1860
418 */
419#define __HFN_INT_MBOX_LPU0_CT2 0x00010000U
420#define __HFN_INT_MBOX_LPU1_CT2 0x00020000U
421#define __HFN_INT_ERR_PSS_CT2 0x00040000U
422#define __HFN_INT_ERR_LPU0_CT2 0x00080000U
423#define __HFN_INT_ERR_LPU1_CT2 0x00100000U
424#define __HFN_INT_CPQ_HALT_CT2 0x00200000U
425#define __HFN_INT_ERR_WGN_CT2 0x00400000U
426#define __HFN_INT_ERR_LEHRX_CT2 0x00800000U
427#define __HFN_INT_ERR_LEHTX_CT2 0x01000000U
428#define __HFN_INT_ERR_MASK_CT2 \
429 (__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
430 __HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
431 __HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
432 __HFN_INT_ERR_LEHTX_CT2)
433#define __HFN_INT_FN0_MASK_CT2 \
434 (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
435 __HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
436 __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
437#define __HFN_INT_FN1_MASK_CT2 \
438 (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
439 __HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
440 __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
441
442/*
443 * asic memory map.
444 */
445#define PSS_SMEM_PAGE_START 0x8000
446#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
447#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
448
449#endif /* __BFI_REG_H__ */
450

source code of linux/drivers/net/ethernet/brocade/bna/bfi_reg.h