1 | // SPDX-License-Identifier: GPL-2.0-or-later |
2 | /* ZD1211 USB-WLAN driver for Linux |
3 | * |
4 | * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> |
5 | * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> |
6 | * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net> |
7 | * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> |
8 | */ |
9 | |
10 | #include <linux/netdevice.h> |
11 | #include <linux/etherdevice.h> |
12 | #include <linux/slab.h> |
13 | #include <linux/usb.h> |
14 | #include <linux/jiffies.h> |
15 | #include <net/ieee80211_radiotap.h> |
16 | |
17 | #include "zd_def.h" |
18 | #include "zd_chip.h" |
19 | #include "zd_mac.h" |
20 | #include "zd_rf.h" |
21 | |
22 | struct zd_reg_alpha2_map { |
23 | u32 reg; |
24 | char alpha2[2]; |
25 | }; |
26 | |
27 | static struct zd_reg_alpha2_map reg_alpha2_map[] = { |
28 | { ZD_REGDOMAIN_FCC, "US" }, |
29 | { ZD_REGDOMAIN_IC, "CA" }, |
30 | { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */ |
31 | { ZD_REGDOMAIN_JAPAN, "JP" }, |
32 | { ZD_REGDOMAIN_JAPAN_2, "JP" }, |
33 | { ZD_REGDOMAIN_JAPAN_3, "JP" }, |
34 | { ZD_REGDOMAIN_SPAIN, "ES" }, |
35 | { ZD_REGDOMAIN_FRANCE, "FR" }, |
36 | }; |
37 | |
38 | /* This table contains the hardware specific values for the modulation rates. */ |
39 | static const struct ieee80211_rate zd_rates[] = { |
40 | { .bitrate = 10, |
41 | .hw_value = ZD_CCK_RATE_1M, }, |
42 | { .bitrate = 20, |
43 | .hw_value = ZD_CCK_RATE_2M, |
44 | .hw_value_short = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT, |
45 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
46 | { .bitrate = 55, |
47 | .hw_value = ZD_CCK_RATE_5_5M, |
48 | .hw_value_short = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT, |
49 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
50 | { .bitrate = 110, |
51 | .hw_value = ZD_CCK_RATE_11M, |
52 | .hw_value_short = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT, |
53 | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, |
54 | { .bitrate = 60, |
55 | .hw_value = ZD_OFDM_RATE_6M, |
56 | .flags = 0 }, |
57 | { .bitrate = 90, |
58 | .hw_value = ZD_OFDM_RATE_9M, |
59 | .flags = 0 }, |
60 | { .bitrate = 120, |
61 | .hw_value = ZD_OFDM_RATE_12M, |
62 | .flags = 0 }, |
63 | { .bitrate = 180, |
64 | .hw_value = ZD_OFDM_RATE_18M, |
65 | .flags = 0 }, |
66 | { .bitrate = 240, |
67 | .hw_value = ZD_OFDM_RATE_24M, |
68 | .flags = 0 }, |
69 | { .bitrate = 360, |
70 | .hw_value = ZD_OFDM_RATE_36M, |
71 | .flags = 0 }, |
72 | { .bitrate = 480, |
73 | .hw_value = ZD_OFDM_RATE_48M, |
74 | .flags = 0 }, |
75 | { .bitrate = 540, |
76 | .hw_value = ZD_OFDM_RATE_54M, |
77 | .flags = 0 }, |
78 | }; |
79 | |
80 | /* |
81 | * Zydas retry rates table. Each line is listed in the same order as |
82 | * in zd_rates[] and contains all the rate used when a packet is sent |
83 | * starting with a given rates. Let's consider an example : |
84 | * |
85 | * "11 Mbits : 4, 3, 2, 1, 0" means : |
86 | * - packet is sent using 4 different rates |
87 | * - 1st rate is index 3 (ie 11 Mbits) |
88 | * - 2nd rate is index 2 (ie 5.5 Mbits) |
89 | * - 3rd rate is index 1 (ie 2 Mbits) |
90 | * - 4th rate is index 0 (ie 1 Mbits) |
91 | */ |
92 | |
93 | static const struct tx_retry_rate zd_retry_rates[] = { |
94 | { /* 1 Mbits */ 1, { 0 }}, |
95 | { /* 2 Mbits */ 2, { 1, 0 }}, |
96 | { /* 5.5 Mbits */ 3, { 2, 1, 0 }}, |
97 | { /* 11 Mbits */ 4, { 3, 2, 1, 0 }}, |
98 | { /* 6 Mbits */ 5, { 4, 3, 2, 1, 0 }}, |
99 | { /* 9 Mbits */ 6, { 5, 4, 3, 2, 1, 0}}, |
100 | { /* 12 Mbits */ 5, { 6, 3, 2, 1, 0 }}, |
101 | { /* 18 Mbits */ 6, { 7, 6, 3, 2, 1, 0 }}, |
102 | { /* 24 Mbits */ 6, { 8, 6, 3, 2, 1, 0 }}, |
103 | { /* 36 Mbits */ 7, { 9, 8, 6, 3, 2, 1, 0 }}, |
104 | { /* 48 Mbits */ 8, {10, 9, 8, 6, 3, 2, 1, 0 }}, |
105 | { /* 54 Mbits */ 9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }} |
106 | }; |
107 | |
108 | static const struct ieee80211_channel zd_channels[] = { |
109 | { .center_freq = 2412, .hw_value = 1 }, |
110 | { .center_freq = 2417, .hw_value = 2 }, |
111 | { .center_freq = 2422, .hw_value = 3 }, |
112 | { .center_freq = 2427, .hw_value = 4 }, |
113 | { .center_freq = 2432, .hw_value = 5 }, |
114 | { .center_freq = 2437, .hw_value = 6 }, |
115 | { .center_freq = 2442, .hw_value = 7 }, |
116 | { .center_freq = 2447, .hw_value = 8 }, |
117 | { .center_freq = 2452, .hw_value = 9 }, |
118 | { .center_freq = 2457, .hw_value = 10 }, |
119 | { .center_freq = 2462, .hw_value = 11 }, |
120 | { .center_freq = 2467, .hw_value = 12 }, |
121 | { .center_freq = 2472, .hw_value = 13 }, |
122 | { .center_freq = 2484, .hw_value = 14 }, |
123 | }; |
124 | |
125 | static void housekeeping_init(struct zd_mac *mac); |
126 | static void housekeeping_enable(struct zd_mac *mac); |
127 | static void housekeeping_disable(struct zd_mac *mac); |
128 | static void beacon_init(struct zd_mac *mac); |
129 | static void beacon_enable(struct zd_mac *mac); |
130 | static void beacon_disable(struct zd_mac *mac); |
131 | static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble); |
132 | static int zd_mac_config_beacon(struct ieee80211_hw *hw, |
133 | struct sk_buff *beacon, bool in_intr); |
134 | |
135 | static int zd_reg2alpha2(u8 regdomain, char *alpha2) |
136 | { |
137 | unsigned int i; |
138 | struct zd_reg_alpha2_map *reg_map; |
139 | for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) { |
140 | reg_map = ®_alpha2_map[i]; |
141 | if (regdomain == reg_map->reg) { |
142 | alpha2[0] = reg_map->alpha2[0]; |
143 | alpha2[1] = reg_map->alpha2[1]; |
144 | return 0; |
145 | } |
146 | } |
147 | return 1; |
148 | } |
149 | |
150 | static int zd_check_signal(struct ieee80211_hw *hw, int signal) |
151 | { |
152 | struct zd_mac *mac = zd_hw_mac(hw); |
153 | |
154 | dev_dbg_f_cond(zd_mac_dev(mac), signal < 0 || signal > 100, |
155 | "%s: signal value from device not in range 0..100, " |
156 | "but %d.\n" , __func__, signal); |
157 | |
158 | if (signal < 0) |
159 | signal = 0; |
160 | else if (signal > 100) |
161 | signal = 100; |
162 | |
163 | return signal; |
164 | } |
165 | |
166 | int zd_mac_preinit_hw(struct ieee80211_hw *hw) |
167 | { |
168 | int r; |
169 | u8 addr[ETH_ALEN]; |
170 | struct zd_mac *mac = zd_hw_mac(hw); |
171 | |
172 | r = zd_chip_read_mac_addr_fw(chip: &mac->chip, addr); |
173 | if (r) |
174 | return r; |
175 | |
176 | SET_IEEE80211_PERM_ADDR(hw, addr); |
177 | |
178 | return 0; |
179 | } |
180 | |
181 | int zd_mac_init_hw(struct ieee80211_hw *hw) |
182 | { |
183 | int r; |
184 | struct zd_mac *mac = zd_hw_mac(hw); |
185 | struct zd_chip *chip = &mac->chip; |
186 | char alpha2[2]; |
187 | u8 default_regdomain; |
188 | |
189 | r = zd_chip_enable_int(chip); |
190 | if (r) |
191 | goto out; |
192 | r = zd_chip_init_hw(chip); |
193 | if (r) |
194 | goto disable_int; |
195 | |
196 | ZD_ASSERT(!irqs_disabled()); |
197 | |
198 | r = zd_read_regdomain(chip, regdomain: &default_regdomain); |
199 | if (r) |
200 | goto disable_int; |
201 | spin_lock_irq(lock: &mac->lock); |
202 | mac->regdomain = mac->default_regdomain = default_regdomain; |
203 | spin_unlock_irq(lock: &mac->lock); |
204 | |
205 | /* We must inform the device that we are doing encryption/decryption in |
206 | * software at the moment. */ |
207 | r = zd_set_encryption_type(chip, ENC_SNIFFER); |
208 | if (r) |
209 | goto disable_int; |
210 | |
211 | r = zd_reg2alpha2(regdomain: mac->regdomain, alpha2); |
212 | if (r) |
213 | goto disable_int; |
214 | |
215 | r = regulatory_hint(wiphy: hw->wiphy, alpha2); |
216 | disable_int: |
217 | zd_chip_disable_int(chip); |
218 | out: |
219 | return r; |
220 | } |
221 | |
222 | void zd_mac_clear(struct zd_mac *mac) |
223 | { |
224 | flush_workqueue(zd_workqueue); |
225 | zd_chip_clear(chip: &mac->chip); |
226 | ZD_MEMCLEAR(mac, sizeof(struct zd_mac)); |
227 | } |
228 | |
229 | static int set_rx_filter(struct zd_mac *mac) |
230 | { |
231 | unsigned long flags; |
232 | u32 filter = STA_RX_FILTER; |
233 | |
234 | spin_lock_irqsave(&mac->lock, flags); |
235 | if (mac->pass_ctrl) |
236 | filter |= RX_FILTER_CTRL; |
237 | spin_unlock_irqrestore(lock: &mac->lock, flags); |
238 | |
239 | return zd_iowrite32(chip: &mac->chip, CR_RX_FILTER, value: filter); |
240 | } |
241 | |
242 | static int set_mac_and_bssid(struct zd_mac *mac) |
243 | { |
244 | int r; |
245 | |
246 | if (!mac->vif) |
247 | return -1; |
248 | |
249 | r = zd_write_mac_addr(chip: &mac->chip, mac_addr: mac->vif->addr); |
250 | if (r) |
251 | return r; |
252 | |
253 | /* Vendor driver after setting MAC either sets BSSID for AP or |
254 | * filter for other modes. |
255 | */ |
256 | if (mac->type != NL80211_IFTYPE_AP) |
257 | return set_rx_filter(mac); |
258 | else |
259 | return zd_write_bssid(chip: &mac->chip, bssid: mac->vif->addr); |
260 | } |
261 | |
262 | static int set_mc_hash(struct zd_mac *mac) |
263 | { |
264 | struct zd_mc_hash hash; |
265 | zd_mc_clear(hash: &hash); |
266 | return zd_chip_set_multicast_hash(chip: &mac->chip, hash: &hash); |
267 | } |
268 | |
269 | int zd_op_start(struct ieee80211_hw *hw) |
270 | { |
271 | struct zd_mac *mac = zd_hw_mac(hw); |
272 | struct zd_chip *chip = &mac->chip; |
273 | struct zd_usb *usb = &chip->usb; |
274 | int r; |
275 | |
276 | if (!usb->initialized) { |
277 | r = zd_usb_init_hw(usb); |
278 | if (r) |
279 | goto out; |
280 | } |
281 | |
282 | r = zd_chip_enable_int(chip); |
283 | if (r < 0) |
284 | goto out; |
285 | |
286 | r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); |
287 | if (r < 0) |
288 | goto disable_int; |
289 | r = set_rx_filter(mac); |
290 | if (r) |
291 | goto disable_int; |
292 | r = set_mc_hash(mac); |
293 | if (r) |
294 | goto disable_int; |
295 | |
296 | /* Wait after setting the multicast hash table and powering on |
297 | * the radio otherwise interface bring up will fail. This matches |
298 | * what the vendor driver did. |
299 | */ |
300 | msleep(msecs: 10); |
301 | |
302 | r = zd_chip_switch_radio_on(chip); |
303 | if (r < 0) { |
304 | dev_err(zd_chip_dev(chip), |
305 | "%s: failed to set radio on\n" , __func__); |
306 | goto disable_int; |
307 | } |
308 | r = zd_chip_enable_rxtx(chip); |
309 | if (r < 0) |
310 | goto disable_radio; |
311 | r = zd_chip_enable_hwint(chip); |
312 | if (r < 0) |
313 | goto disable_rxtx; |
314 | |
315 | housekeeping_enable(mac); |
316 | beacon_enable(mac); |
317 | set_bit(nr: ZD_DEVICE_RUNNING, addr: &mac->flags); |
318 | return 0; |
319 | disable_rxtx: |
320 | zd_chip_disable_rxtx(chip); |
321 | disable_radio: |
322 | zd_chip_switch_radio_off(chip); |
323 | disable_int: |
324 | zd_chip_disable_int(chip); |
325 | out: |
326 | return r; |
327 | } |
328 | |
329 | void zd_op_stop(struct ieee80211_hw *hw) |
330 | { |
331 | struct zd_mac *mac = zd_hw_mac(hw); |
332 | struct zd_chip *chip = &mac->chip; |
333 | struct sk_buff *skb; |
334 | struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue; |
335 | |
336 | clear_bit(nr: ZD_DEVICE_RUNNING, addr: &mac->flags); |
337 | |
338 | /* The order here deliberately is a little different from the open() |
339 | * method, since we need to make sure there is no opportunity for RX |
340 | * frames to be processed by mac80211 after we have stopped it. |
341 | */ |
342 | |
343 | zd_chip_disable_rxtx(chip); |
344 | beacon_disable(mac); |
345 | housekeeping_disable(mac); |
346 | flush_workqueue(zd_workqueue); |
347 | |
348 | zd_chip_disable_hwint(chip); |
349 | zd_chip_switch_radio_off(chip); |
350 | zd_chip_disable_int(chip); |
351 | |
352 | |
353 | while ((skb = skb_dequeue(list: ack_wait_queue))) |
354 | dev_kfree_skb_any(skb); |
355 | } |
356 | |
357 | int zd_restore_settings(struct zd_mac *mac) |
358 | { |
359 | struct sk_buff *beacon; |
360 | struct zd_mc_hash multicast_hash; |
361 | unsigned int short_preamble; |
362 | int r, beacon_interval, beacon_period; |
363 | u8 channel; |
364 | |
365 | dev_dbg_f(zd_mac_dev(mac), "\n" ); |
366 | |
367 | spin_lock_irq(lock: &mac->lock); |
368 | multicast_hash = mac->multicast_hash; |
369 | short_preamble = mac->short_preamble; |
370 | beacon_interval = mac->beacon.interval; |
371 | beacon_period = mac->beacon.period; |
372 | channel = mac->channel; |
373 | spin_unlock_irq(lock: &mac->lock); |
374 | |
375 | r = set_mac_and_bssid(mac); |
376 | if (r < 0) { |
377 | dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n" , r); |
378 | return r; |
379 | } |
380 | |
381 | r = zd_chip_set_channel(chip: &mac->chip, channel); |
382 | if (r < 0) { |
383 | dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n" , |
384 | r); |
385 | return r; |
386 | } |
387 | |
388 | set_rts_cts(mac, short_preamble); |
389 | |
390 | r = zd_chip_set_multicast_hash(chip: &mac->chip, hash: &multicast_hash); |
391 | if (r < 0) { |
392 | dev_dbg_f(zd_mac_dev(mac), |
393 | "zd_chip_set_multicast_hash failed, %d\n" , r); |
394 | return r; |
395 | } |
396 | |
397 | if (mac->type == NL80211_IFTYPE_MESH_POINT || |
398 | mac->type == NL80211_IFTYPE_ADHOC || |
399 | mac->type == NL80211_IFTYPE_AP) { |
400 | if (mac->vif != NULL) { |
401 | beacon = ieee80211_beacon_get(hw: mac->hw, vif: mac->vif, link_id: 0); |
402 | if (beacon) |
403 | zd_mac_config_beacon(hw: mac->hw, beacon, in_intr: false); |
404 | } |
405 | |
406 | zd_set_beacon_interval(chip: &mac->chip, interval: beacon_interval, |
407 | dtim_period: beacon_period, type: mac->type); |
408 | |
409 | spin_lock_irq(lock: &mac->lock); |
410 | mac->beacon.last_update = jiffies; |
411 | spin_unlock_irq(lock: &mac->lock); |
412 | } |
413 | |
414 | return 0; |
415 | } |
416 | |
417 | /** |
418 | * zd_mac_tx_status - reports tx status of a packet if required |
419 | * @hw: a &struct ieee80211_hw pointer |
420 | * @skb: a sk-buffer |
421 | * @ackssi: ACK signal strength |
422 | * @tx_status: success and/or retry |
423 | * |
424 | * This information calls ieee80211_tx_status_irqsafe() if required by the |
425 | * control information. It copies the control information into the status |
426 | * information. |
427 | * |
428 | * If no status information has been requested, the skb is freed. |
429 | */ |
430 | static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, |
431 | int ackssi, struct tx_status *tx_status) |
432 | { |
433 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
434 | int i; |
435 | int success = 1, retry = 1; |
436 | int first_idx; |
437 | const struct tx_retry_rate *retries; |
438 | |
439 | ieee80211_tx_info_clear_status(info); |
440 | |
441 | if (tx_status) { |
442 | success = !tx_status->failure; |
443 | retry = tx_status->retry + success; |
444 | } |
445 | |
446 | if (success) { |
447 | /* success */ |
448 | info->flags |= IEEE80211_TX_STAT_ACK; |
449 | } else { |
450 | /* failure */ |
451 | info->flags &= ~IEEE80211_TX_STAT_ACK; |
452 | } |
453 | |
454 | first_idx = info->status.rates[0].idx; |
455 | ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); |
456 | retries = &zd_retry_rates[first_idx]; |
457 | ZD_ASSERT(1 <= retry && retry <= retries->count); |
458 | |
459 | info->status.rates[0].idx = retries->rate[0]; |
460 | info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1); |
461 | |
462 | for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) { |
463 | info->status.rates[i].idx = retries->rate[i]; |
464 | info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2); |
465 | } |
466 | for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) { |
467 | info->status.rates[i].idx = retries->rate[retry - 1]; |
468 | info->status.rates[i].count = 1; // (success ? 1:2); |
469 | } |
470 | if (i<IEEE80211_TX_MAX_RATES) |
471 | info->status.rates[i].idx = -1; /* terminate */ |
472 | |
473 | info->status.ack_signal = zd_check_signal(hw, signal: ackssi); |
474 | ieee80211_tx_status_irqsafe(hw, skb); |
475 | } |
476 | |
477 | /** |
478 | * zd_mac_tx_failed - callback for failed frames |
479 | * @urb: pointer to the urb structure |
480 | * |
481 | * This function is called if a frame couldn't be successfully |
482 | * transferred. The first frame from the tx queue, will be selected and |
483 | * reported as error to the upper layers. |
484 | */ |
485 | void zd_mac_tx_failed(struct urb *urb) |
486 | { |
487 | struct ieee80211_hw * hw = zd_usb_to_hw(usb: urb->context); |
488 | struct zd_mac *mac = zd_hw_mac(hw); |
489 | struct sk_buff_head *q = &mac->ack_wait_queue; |
490 | struct sk_buff *skb; |
491 | struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer; |
492 | unsigned long flags; |
493 | int success = !tx_status->failure; |
494 | int retry = tx_status->retry + success; |
495 | int found = 0; |
496 | int i, position = 0; |
497 | |
498 | spin_lock_irqsave(&q->lock, flags); |
499 | |
500 | skb_queue_walk(q, skb) { |
501 | struct ieee80211_hdr *tx_hdr; |
502 | struct ieee80211_tx_info *info; |
503 | int first_idx, final_idx; |
504 | const struct tx_retry_rate *retries; |
505 | u8 final_rate; |
506 | |
507 | position ++; |
508 | |
509 | /* if the hardware reports a failure and we had a 802.11 ACK |
510 | * pending, then we skip the first skb when searching for a |
511 | * matching frame */ |
512 | if (tx_status->failure && mac->ack_pending && |
513 | skb_queue_is_first(list: q, skb)) { |
514 | continue; |
515 | } |
516 | |
517 | tx_hdr = (struct ieee80211_hdr *)skb->data; |
518 | |
519 | /* we skip all frames not matching the reported destination */ |
520 | if (unlikely(!ether_addr_equal(tx_hdr->addr1, tx_status->mac))) |
521 | continue; |
522 | |
523 | /* we skip all frames not matching the reported final rate */ |
524 | |
525 | info = IEEE80211_SKB_CB(skb); |
526 | first_idx = info->status.rates[0].idx; |
527 | ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); |
528 | retries = &zd_retry_rates[first_idx]; |
529 | if (retry <= 0 || retry > retries->count) |
530 | continue; |
531 | |
532 | final_idx = retries->rate[retry - 1]; |
533 | final_rate = zd_rates[final_idx].hw_value; |
534 | |
535 | if (final_rate != tx_status->rate) { |
536 | continue; |
537 | } |
538 | |
539 | found = 1; |
540 | break; |
541 | } |
542 | |
543 | if (found) { |
544 | for (i=1; i<=position; i++) { |
545 | skb = __skb_dequeue(list: q); |
546 | zd_mac_tx_status(hw, skb, |
547 | ackssi: mac->ack_pending ? mac->ack_signal : 0, |
548 | tx_status: i == position ? tx_status : NULL); |
549 | mac->ack_pending = 0; |
550 | } |
551 | } |
552 | |
553 | spin_unlock_irqrestore(lock: &q->lock, flags); |
554 | } |
555 | |
556 | /** |
557 | * zd_mac_tx_to_dev - callback for USB layer |
558 | * @skb: a &sk_buff pointer |
559 | * @error: error value, 0 if transmission successful |
560 | * |
561 | * Informs the MAC layer that the frame has successfully transferred to the |
562 | * device. If an ACK is required and the transfer to the device has been |
563 | * successful, the packets are put on the @ack_wait_queue with |
564 | * the control set removed. |
565 | */ |
566 | void zd_mac_tx_to_dev(struct sk_buff *skb, int error) |
567 | { |
568 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
569 | struct ieee80211_hw *hw = info->rate_driver_data[0]; |
570 | struct zd_mac *mac = zd_hw_mac(hw); |
571 | |
572 | ieee80211_tx_info_clear_status(info); |
573 | |
574 | skb_pull(skb, len: sizeof(struct zd_ctrlset)); |
575 | if (unlikely(error || |
576 | (info->flags & IEEE80211_TX_CTL_NO_ACK))) { |
577 | /* |
578 | * FIXME : do we need to fill in anything ? |
579 | */ |
580 | ieee80211_tx_status_irqsafe(hw, skb); |
581 | } else { |
582 | struct sk_buff_head *q = &mac->ack_wait_queue; |
583 | |
584 | skb_queue_tail(list: q, newsk: skb); |
585 | while (skb_queue_len(list_: q) > ZD_MAC_MAX_ACK_WAITERS) { |
586 | zd_mac_tx_status(hw, skb: skb_dequeue(list: q), |
587 | ackssi: mac->ack_pending ? mac->ack_signal : 0, |
588 | NULL); |
589 | mac->ack_pending = 0; |
590 | } |
591 | } |
592 | } |
593 | |
594 | static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) |
595 | { |
596 | /* ZD_PURE_RATE() must be used to remove the modulation type flag of |
597 | * the zd-rate values. |
598 | */ |
599 | static const u8 rate_divisor[] = { |
600 | [ZD_PURE_RATE(ZD_CCK_RATE_1M)] = 1, |
601 | [ZD_PURE_RATE(ZD_CCK_RATE_2M)] = 2, |
602 | /* Bits must be doubled. */ |
603 | [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11, |
604 | [ZD_PURE_RATE(ZD_CCK_RATE_11M)] = 11, |
605 | [ZD_PURE_RATE(ZD_OFDM_RATE_6M)] = 6, |
606 | [ZD_PURE_RATE(ZD_OFDM_RATE_9M)] = 9, |
607 | [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12, |
608 | [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18, |
609 | [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24, |
610 | [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36, |
611 | [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48, |
612 | [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54, |
613 | }; |
614 | |
615 | u32 bits = (u32)tx_length * 8; |
616 | u32 divisor; |
617 | |
618 | divisor = rate_divisor[ZD_PURE_RATE(zd_rate)]; |
619 | if (divisor == 0) |
620 | return -EINVAL; |
621 | |
622 | switch (zd_rate) { |
623 | case ZD_CCK_RATE_5_5M: |
624 | bits = (2*bits) + 10; /* round up to the next integer */ |
625 | break; |
626 | case ZD_CCK_RATE_11M: |
627 | if (service) { |
628 | u32 t = bits % 11; |
629 | *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; |
630 | if (0 < t && t <= 3) { |
631 | *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; |
632 | } |
633 | } |
634 | bits += 10; /* round up to the next integer */ |
635 | break; |
636 | } |
637 | |
638 | return bits/divisor; |
639 | } |
640 | |
641 | static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, |
642 | struct ieee80211_hdr *, |
643 | struct ieee80211_tx_info *info) |
644 | { |
645 | /* |
646 | * CONTROL TODO: |
647 | * - if backoff needed, enable bit 0 |
648 | * - if burst (backoff not needed) disable bit 0 |
649 | */ |
650 | |
651 | cs->control = 0; |
652 | |
653 | /* First fragment */ |
654 | if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) |
655 | cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; |
656 | |
657 | /* No ACK expected (multicast, etc.) */ |
658 | if (info->flags & IEEE80211_TX_CTL_NO_ACK) |
659 | cs->control |= ZD_CS_NO_ACK; |
660 | |
661 | /* PS-POLL */ |
662 | if (ieee80211_is_pspoll(fc: header->frame_control)) |
663 | cs->control |= ZD_CS_PS_POLL_FRAME; |
664 | |
665 | if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) |
666 | cs->control |= ZD_CS_RTS; |
667 | |
668 | if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) |
669 | cs->control |= ZD_CS_SELF_CTS; |
670 | |
671 | /* FIXME: Management frame? */ |
672 | } |
673 | |
674 | static bool zd_mac_match_cur_beacon(struct zd_mac *mac, struct sk_buff *beacon) |
675 | { |
676 | if (!mac->beacon.cur_beacon) |
677 | return false; |
678 | |
679 | if (mac->beacon.cur_beacon->len != beacon->len) |
680 | return false; |
681 | |
682 | return !memcmp(p: beacon->data, q: mac->beacon.cur_beacon->data, size: beacon->len); |
683 | } |
684 | |
685 | static void zd_mac_free_cur_beacon_locked(struct zd_mac *mac) |
686 | { |
687 | ZD_ASSERT(mutex_is_locked(&mac->chip.mutex)); |
688 | |
689 | kfree_skb(skb: mac->beacon.cur_beacon); |
690 | mac->beacon.cur_beacon = NULL; |
691 | } |
692 | |
693 | static void zd_mac_free_cur_beacon(struct zd_mac *mac) |
694 | { |
695 | mutex_lock(&mac->chip.mutex); |
696 | zd_mac_free_cur_beacon_locked(mac); |
697 | mutex_unlock(lock: &mac->chip.mutex); |
698 | } |
699 | |
700 | static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon, |
701 | bool in_intr) |
702 | { |
703 | struct zd_mac *mac = zd_hw_mac(hw); |
704 | int r, ret, num_cmds, req_pos = 0; |
705 | u32 tmp, j = 0; |
706 | /* 4 more bytes for tail CRC */ |
707 | u32 full_len = beacon->len + 4; |
708 | unsigned long end_jiffies, message_jiffies; |
709 | struct zd_ioreq32 *ioreqs; |
710 | |
711 | mutex_lock(&mac->chip.mutex); |
712 | |
713 | /* Check if hw already has this beacon. */ |
714 | if (zd_mac_match_cur_beacon(mac, beacon)) { |
715 | r = 0; |
716 | goto out_nofree; |
717 | } |
718 | |
719 | /* Alloc memory for full beacon write at once. */ |
720 | num_cmds = 1 + zd_chip_is_zd1211b(chip: &mac->chip) + full_len; |
721 | ioreqs = kmalloc_array(n: num_cmds, size: sizeof(struct zd_ioreq32), |
722 | GFP_KERNEL); |
723 | if (!ioreqs) { |
724 | r = -ENOMEM; |
725 | goto out_nofree; |
726 | } |
727 | |
728 | r = zd_iowrite32_locked(chip: &mac->chip, value: 0, CR_BCN_FIFO_SEMAPHORE); |
729 | if (r < 0) |
730 | goto out; |
731 | r = zd_ioread32_locked(chip: &mac->chip, value: &tmp, CR_BCN_FIFO_SEMAPHORE); |
732 | if (r < 0) |
733 | goto release_sema; |
734 | if (in_intr && tmp & 0x2) { |
735 | r = -EBUSY; |
736 | goto release_sema; |
737 | } |
738 | |
739 | end_jiffies = jiffies + HZ / 2; /*~500ms*/ |
740 | message_jiffies = jiffies + HZ / 10; /*~100ms*/ |
741 | while (tmp & 0x2) { |
742 | r = zd_ioread32_locked(chip: &mac->chip, value: &tmp, CR_BCN_FIFO_SEMAPHORE); |
743 | if (r < 0) |
744 | goto release_sema; |
745 | if (time_is_before_eq_jiffies(message_jiffies)) { |
746 | message_jiffies = jiffies + HZ / 10; |
747 | dev_err(zd_mac_dev(mac), |
748 | "CR_BCN_FIFO_SEMAPHORE not ready\n" ); |
749 | if (time_is_before_eq_jiffies(end_jiffies)) { |
750 | dev_err(zd_mac_dev(mac), |
751 | "Giving up beacon config.\n" ); |
752 | r = -ETIMEDOUT; |
753 | goto reset_device; |
754 | } |
755 | } |
756 | msleep(msecs: 20); |
757 | } |
758 | |
759 | ioreqs[req_pos].addr = CR_BCN_FIFO; |
760 | ioreqs[req_pos].value = full_len - 1; |
761 | req_pos++; |
762 | if (zd_chip_is_zd1211b(chip: &mac->chip)) { |
763 | ioreqs[req_pos].addr = CR_BCN_LENGTH; |
764 | ioreqs[req_pos].value = full_len - 1; |
765 | req_pos++; |
766 | } |
767 | |
768 | for (j = 0 ; j < beacon->len; j++) { |
769 | ioreqs[req_pos].addr = CR_BCN_FIFO; |
770 | ioreqs[req_pos].value = *((u8 *)(beacon->data + j)); |
771 | req_pos++; |
772 | } |
773 | |
774 | for (j = 0; j < 4; j++) { |
775 | ioreqs[req_pos].addr = CR_BCN_FIFO; |
776 | ioreqs[req_pos].value = 0x0; |
777 | req_pos++; |
778 | } |
779 | |
780 | BUG_ON(req_pos != num_cmds); |
781 | |
782 | r = zd_iowrite32a_locked(chip: &mac->chip, ioreqs, count: num_cmds); |
783 | |
784 | release_sema: |
785 | /* |
786 | * Try very hard to release device beacon semaphore, as otherwise |
787 | * device/driver can be left in unusable state. |
788 | */ |
789 | end_jiffies = jiffies + HZ / 2; /*~500ms*/ |
790 | ret = zd_iowrite32_locked(chip: &mac->chip, value: 1, CR_BCN_FIFO_SEMAPHORE); |
791 | while (ret < 0) { |
792 | if (in_intr || time_is_before_eq_jiffies(end_jiffies)) { |
793 | ret = -ETIMEDOUT; |
794 | break; |
795 | } |
796 | |
797 | msleep(msecs: 20); |
798 | ret = zd_iowrite32_locked(chip: &mac->chip, value: 1, CR_BCN_FIFO_SEMAPHORE); |
799 | } |
800 | |
801 | if (ret < 0) |
802 | dev_err(zd_mac_dev(mac), "Could not release " |
803 | "CR_BCN_FIFO_SEMAPHORE!\n" ); |
804 | if (r < 0 || ret < 0) { |
805 | if (r >= 0) |
806 | r = ret; |
807 | |
808 | /* We don't know if beacon was written successfully or not, |
809 | * so clear current. */ |
810 | zd_mac_free_cur_beacon_locked(mac); |
811 | |
812 | goto out; |
813 | } |
814 | |
815 | /* Beacon has now been written successfully, update current. */ |
816 | zd_mac_free_cur_beacon_locked(mac); |
817 | mac->beacon.cur_beacon = beacon; |
818 | beacon = NULL; |
819 | |
820 | /* 802.11b/g 2.4G CCK 1Mb |
821 | * 802.11a, not yet implemented, uses different values (see GPL vendor |
822 | * driver) |
823 | */ |
824 | r = zd_iowrite32_locked(chip: &mac->chip, value: 0x00000400 | (full_len << 19), |
825 | CR_BCN_PLCP_CFG); |
826 | out: |
827 | kfree(objp: ioreqs); |
828 | out_nofree: |
829 | kfree_skb(skb: beacon); |
830 | mutex_unlock(lock: &mac->chip.mutex); |
831 | |
832 | return r; |
833 | |
834 | reset_device: |
835 | zd_mac_free_cur_beacon_locked(mac); |
836 | kfree_skb(skb: beacon); |
837 | |
838 | mutex_unlock(lock: &mac->chip.mutex); |
839 | kfree(objp: ioreqs); |
840 | |
841 | /* semaphore stuck, reset device to avoid fw freeze later */ |
842 | dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, " |
843 | "resetting device..." ); |
844 | usb_queue_reset_device(dev: mac->chip.usb.intf); |
845 | |
846 | return r; |
847 | } |
848 | |
849 | static int fill_ctrlset(struct zd_mac *mac, |
850 | struct sk_buff *skb) |
851 | { |
852 | int r; |
853 | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
854 | unsigned int frag_len = skb->len + FCS_LEN; |
855 | unsigned int packet_length; |
856 | struct ieee80211_rate *txrate; |
857 | struct zd_ctrlset *cs = skb_push(skb, len: sizeof(struct zd_ctrlset)); |
858 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
859 | |
860 | ZD_ASSERT(frag_len <= 0xffff); |
861 | |
862 | /* |
863 | * Firmware computes the duration itself (for all frames except PSPoll) |
864 | * and needs the field set to 0 at input, otherwise firmware messes up |
865 | * duration_id and sets bits 14 and 15 on. |
866 | */ |
867 | if (!ieee80211_is_pspoll(fc: hdr->frame_control)) |
868 | hdr->duration_id = 0; |
869 | |
870 | txrate = ieee80211_get_tx_rate(hw: mac->hw, c: info); |
871 | |
872 | cs->modulation = txrate->hw_value; |
873 | if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) |
874 | cs->modulation = txrate->hw_value_short; |
875 | |
876 | cs->tx_length = cpu_to_le16(frag_len); |
877 | |
878 | cs_set_control(mac, cs, header: hdr, info); |
879 | |
880 | packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; |
881 | ZD_ASSERT(packet_length <= 0xffff); |
882 | /* ZD1211B: Computing the length difference this way, gives us |
883 | * flexibility to compute the packet length. |
884 | */ |
885 | cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ? |
886 | packet_length - frag_len : packet_length); |
887 | |
888 | /* |
889 | * CURRENT LENGTH: |
890 | * - transmit frame length in microseconds |
891 | * - seems to be derived from frame length |
892 | * - see Cal_Us_Service() in zdinlinef.h |
893 | * - if macp->bTxBurstEnable is enabled, then multiply by 4 |
894 | * - bTxBurstEnable is never set in the vendor driver |
895 | * |
896 | * SERVICE: |
897 | * - "for PLCP configuration" |
898 | * - always 0 except in some situations at 802.11b 11M |
899 | * - see line 53 of zdinlinef.h |
900 | */ |
901 | cs->service = 0; |
902 | r = zd_calc_tx_length_us(service: &cs->service, ZD_RATE(cs->modulation), |
903 | le16_to_cpu(cs->tx_length)); |
904 | if (r < 0) |
905 | return r; |
906 | cs->current_length = cpu_to_le16(r); |
907 | cs->next_frame_length = 0; |
908 | |
909 | return 0; |
910 | } |
911 | |
912 | /** |
913 | * zd_op_tx - transmits a network frame to the device |
914 | * |
915 | * @hw: a &struct ieee80211_hw pointer |
916 | * @control: the control structure |
917 | * @skb: socket buffer |
918 | * |
919 | * This function transmit an IEEE 802.11 network frame to the device. The |
920 | * control block of the skbuff will be initialized. If necessary the incoming |
921 | * mac80211 queues will be stopped. |
922 | */ |
923 | static void zd_op_tx(struct ieee80211_hw *hw, |
924 | struct ieee80211_tx_control *control, |
925 | struct sk_buff *skb) |
926 | { |
927 | struct zd_mac *mac = zd_hw_mac(hw); |
928 | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
929 | int r; |
930 | |
931 | r = fill_ctrlset(mac, skb); |
932 | if (r) |
933 | goto fail; |
934 | |
935 | info->rate_driver_data[0] = hw; |
936 | |
937 | r = zd_usb_tx(usb: &mac->chip.usb, skb); |
938 | if (r) |
939 | goto fail; |
940 | return; |
941 | |
942 | fail: |
943 | dev_kfree_skb(skb); |
944 | } |
945 | |
946 | /** |
947 | * filter_ack - filters incoming packets for acknowledgements |
948 | * @hw: a &struct ieee80211_hw pointer |
949 | * @rx_hdr: received header |
950 | * @stats: the status for the received packet |
951 | * |
952 | * This functions looks for ACK packets and tries to match them with the |
953 | * frames in the tx queue. If a match is found the frame will be dequeued and |
954 | * the upper layers is informed about the successful transmission. If |
955 | * mac80211 queues have been stopped and the number of frames still to be |
956 | * transmitted is low the queues will be opened again. |
957 | * |
958 | * Returns 1 if the frame was an ACK, 0 if it was ignored. |
959 | */ |
960 | static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, |
961 | struct ieee80211_rx_status *stats) |
962 | { |
963 | struct zd_mac *mac = zd_hw_mac(hw); |
964 | struct sk_buff *skb; |
965 | struct sk_buff_head *q; |
966 | unsigned long flags; |
967 | int found = 0; |
968 | int i, position = 0; |
969 | |
970 | if (!ieee80211_is_ack(fc: rx_hdr->frame_control)) |
971 | return 0; |
972 | |
973 | q = &mac->ack_wait_queue; |
974 | spin_lock_irqsave(&q->lock, flags); |
975 | skb_queue_walk(q, skb) { |
976 | struct ieee80211_hdr *tx_hdr; |
977 | |
978 | position ++; |
979 | |
980 | if (mac->ack_pending && skb_queue_is_first(list: q, skb)) |
981 | continue; |
982 | |
983 | tx_hdr = (struct ieee80211_hdr *)skb->data; |
984 | if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1))) |
985 | { |
986 | found = 1; |
987 | break; |
988 | } |
989 | } |
990 | |
991 | if (found) { |
992 | for (i=1; i<position; i++) { |
993 | skb = __skb_dequeue(list: q); |
994 | zd_mac_tx_status(hw, skb, |
995 | ackssi: mac->ack_pending ? mac->ack_signal : 0, |
996 | NULL); |
997 | mac->ack_pending = 0; |
998 | } |
999 | |
1000 | mac->ack_pending = 1; |
1001 | mac->ack_signal = stats->signal; |
1002 | |
1003 | /* Prevent pending tx-packet on AP-mode */ |
1004 | if (mac->type == NL80211_IFTYPE_AP) { |
1005 | skb = __skb_dequeue(list: q); |
1006 | zd_mac_tx_status(hw, skb, ackssi: mac->ack_signal, NULL); |
1007 | mac->ack_pending = 0; |
1008 | } |
1009 | } |
1010 | |
1011 | spin_unlock_irqrestore(lock: &q->lock, flags); |
1012 | return 1; |
1013 | } |
1014 | |
1015 | int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) |
1016 | { |
1017 | struct zd_mac *mac = zd_hw_mac(hw); |
1018 | struct ieee80211_rx_status stats; |
1019 | const struct rx_status *status; |
1020 | struct sk_buff *skb; |
1021 | int bad_frame = 0; |
1022 | __le16 fc; |
1023 | int need_padding; |
1024 | int i; |
1025 | u8 rate; |
1026 | |
1027 | if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ + |
1028 | FCS_LEN + sizeof(struct rx_status)) |
1029 | return -EINVAL; |
1030 | |
1031 | memset(&stats, 0, sizeof(stats)); |
1032 | |
1033 | /* Note about pass_failed_fcs and pass_ctrl access below: |
1034 | * mac locking intentionally omitted here, as this is the only unlocked |
1035 | * reader and the only writer is configure_filter. Plus, if there were |
1036 | * any races accessing these variables, it wouldn't really matter. |
1037 | * If mac80211 ever provides a way for us to access filter flags |
1038 | * from outside configure_filter, we could improve on this. Also, this |
1039 | * situation may change once we implement some kind of DMA-into-skb |
1040 | * RX path. */ |
1041 | |
1042 | /* Caller has to ensure that length >= sizeof(struct rx_status). */ |
1043 | status = (struct rx_status *) |
1044 | (buffer + (length - sizeof(struct rx_status))); |
1045 | if (status->frame_status & ZD_RX_ERROR) { |
1046 | if (mac->pass_failed_fcs && |
1047 | (status->frame_status & ZD_RX_CRC32_ERROR)) { |
1048 | stats.flag |= RX_FLAG_FAILED_FCS_CRC; |
1049 | bad_frame = 1; |
1050 | } else { |
1051 | return -EINVAL; |
1052 | } |
1053 | } |
1054 | |
1055 | stats.freq = zd_channels[_zd_chip_get_channel(chip: &mac->chip) - 1].center_freq; |
1056 | stats.band = NL80211_BAND_2GHZ; |
1057 | stats.signal = zd_check_signal(hw, signal: status->signal_strength); |
1058 | |
1059 | rate = zd_rx_rate(rx_frame: buffer, status); |
1060 | |
1061 | /* todo: return index in the big switches in zd_rx_rate instead */ |
1062 | for (i = 0; i < mac->band.n_bitrates; i++) |
1063 | if (rate == mac->band.bitrates[i].hw_value) |
1064 | stats.rate_idx = i; |
1065 | |
1066 | length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status); |
1067 | buffer += ZD_PLCP_HEADER_SIZE; |
1068 | |
1069 | /* Except for bad frames, filter each frame to see if it is an ACK, in |
1070 | * which case our internal TX tracking is updated. Normally we then |
1071 | * bail here as there's no need to pass ACKs on up to the stack, but |
1072 | * there is also the case where the stack has requested us to pass |
1073 | * control frames on up (pass_ctrl) which we must consider. */ |
1074 | if (!bad_frame && |
1075 | filter_ack(hw, rx_hdr: (struct ieee80211_hdr *)buffer, stats: &stats) |
1076 | && !mac->pass_ctrl) |
1077 | return 0; |
1078 | |
1079 | fc = get_unaligned((__le16*)buffer); |
1080 | need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc); |
1081 | |
1082 | skb = dev_alloc_skb(length: length + (need_padding ? 2 : 0)); |
1083 | if (skb == NULL) |
1084 | return -ENOMEM; |
1085 | if (need_padding) { |
1086 | /* Make sure the payload data is 4 byte aligned. */ |
1087 | skb_reserve(skb, len: 2); |
1088 | } |
1089 | |
1090 | /* FIXME : could we avoid this big memcpy ? */ |
1091 | skb_put_data(skb, data: buffer, len: length); |
1092 | |
1093 | memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats)); |
1094 | ieee80211_rx_irqsafe(hw, skb); |
1095 | return 0; |
1096 | } |
1097 | |
1098 | static int zd_op_add_interface(struct ieee80211_hw *hw, |
1099 | struct ieee80211_vif *vif) |
1100 | { |
1101 | struct zd_mac *mac = zd_hw_mac(hw); |
1102 | |
1103 | /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */ |
1104 | if (mac->type != NL80211_IFTYPE_UNSPECIFIED) |
1105 | return -EOPNOTSUPP; |
1106 | |
1107 | switch (vif->type) { |
1108 | case NL80211_IFTYPE_MONITOR: |
1109 | case NL80211_IFTYPE_MESH_POINT: |
1110 | case NL80211_IFTYPE_STATION: |
1111 | case NL80211_IFTYPE_ADHOC: |
1112 | case NL80211_IFTYPE_AP: |
1113 | mac->type = vif->type; |
1114 | break; |
1115 | default: |
1116 | return -EOPNOTSUPP; |
1117 | } |
1118 | |
1119 | mac->vif = vif; |
1120 | |
1121 | return set_mac_and_bssid(mac); |
1122 | } |
1123 | |
1124 | static void zd_op_remove_interface(struct ieee80211_hw *hw, |
1125 | struct ieee80211_vif *vif) |
1126 | { |
1127 | struct zd_mac *mac = zd_hw_mac(hw); |
1128 | mac->type = NL80211_IFTYPE_UNSPECIFIED; |
1129 | mac->vif = NULL; |
1130 | zd_set_beacon_interval(chip: &mac->chip, interval: 0, dtim_period: 0, type: NL80211_IFTYPE_UNSPECIFIED); |
1131 | zd_write_mac_addr(chip: &mac->chip, NULL); |
1132 | |
1133 | zd_mac_free_cur_beacon(mac); |
1134 | } |
1135 | |
1136 | static int zd_op_config(struct ieee80211_hw *hw, u32 changed) |
1137 | { |
1138 | struct zd_mac *mac = zd_hw_mac(hw); |
1139 | struct ieee80211_conf *conf = &hw->conf; |
1140 | |
1141 | spin_lock_irq(lock: &mac->lock); |
1142 | mac->channel = conf->chandef.chan->hw_value; |
1143 | spin_unlock_irq(lock: &mac->lock); |
1144 | |
1145 | return zd_chip_set_channel(chip: &mac->chip, channel: conf->chandef.chan->hw_value); |
1146 | } |
1147 | |
1148 | static void zd_beacon_done(struct zd_mac *mac) |
1149 | { |
1150 | struct sk_buff *skb, *beacon; |
1151 | |
1152 | if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) |
1153 | return; |
1154 | if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP) |
1155 | return; |
1156 | |
1157 | /* |
1158 | * Send out buffered broad- and multicast frames. |
1159 | */ |
1160 | while (!ieee80211_queue_stopped(hw: mac->hw, queue: 0)) { |
1161 | skb = ieee80211_get_buffered_bc(hw: mac->hw, vif: mac->vif); |
1162 | if (!skb) |
1163 | break; |
1164 | zd_op_tx(hw: mac->hw, NULL, skb); |
1165 | } |
1166 | |
1167 | /* |
1168 | * Fetch next beacon so that tim_count is updated. |
1169 | */ |
1170 | beacon = ieee80211_beacon_get(hw: mac->hw, vif: mac->vif, link_id: 0); |
1171 | if (beacon) |
1172 | zd_mac_config_beacon(hw: mac->hw, beacon, in_intr: true); |
1173 | |
1174 | spin_lock_irq(lock: &mac->lock); |
1175 | mac->beacon.last_update = jiffies; |
1176 | spin_unlock_irq(lock: &mac->lock); |
1177 | } |
1178 | |
1179 | static void zd_process_intr(struct work_struct *work) |
1180 | { |
1181 | u16 int_status; |
1182 | unsigned long flags; |
1183 | struct zd_mac *mac = container_of(work, struct zd_mac, process_intr); |
1184 | |
1185 | spin_lock_irqsave(&mac->lock, flags); |
1186 | int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer + 4)); |
1187 | spin_unlock_irqrestore(lock: &mac->lock, flags); |
1188 | |
1189 | if (int_status & INT_CFG_NEXT_BCN) { |
1190 | /*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/ |
1191 | zd_beacon_done(mac); |
1192 | } else { |
1193 | dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n" ); |
1194 | } |
1195 | |
1196 | zd_chip_enable_hwint(chip: &mac->chip); |
1197 | } |
1198 | |
1199 | |
1200 | static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw, |
1201 | struct netdev_hw_addr_list *mc_list) |
1202 | { |
1203 | struct zd_mac *mac = zd_hw_mac(hw); |
1204 | struct zd_mc_hash hash; |
1205 | struct netdev_hw_addr *ha; |
1206 | |
1207 | zd_mc_clear(hash: &hash); |
1208 | |
1209 | netdev_hw_addr_list_for_each(ha, mc_list) { |
1210 | dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n" , ha->addr); |
1211 | zd_mc_add_addr(hash: &hash, addr: ha->addr); |
1212 | } |
1213 | |
1214 | return hash.low | ((u64)hash.high << 32); |
1215 | } |
1216 | |
1217 | #define SUPPORTED_FIF_FLAGS \ |
1218 | (FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \ |
1219 | FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC) |
1220 | static void zd_op_configure_filter(struct ieee80211_hw *hw, |
1221 | unsigned int changed_flags, |
1222 | unsigned int *new_flags, |
1223 | u64 multicast) |
1224 | { |
1225 | struct zd_mc_hash hash = { |
1226 | .low = multicast, |
1227 | .high = multicast >> 32, |
1228 | }; |
1229 | struct zd_mac *mac = zd_hw_mac(hw); |
1230 | unsigned long flags; |
1231 | int r; |
1232 | |
1233 | /* Only deal with supported flags */ |
1234 | changed_flags &= SUPPORTED_FIF_FLAGS; |
1235 | *new_flags &= SUPPORTED_FIF_FLAGS; |
1236 | |
1237 | /* |
1238 | * If multicast parameter (as returned by zd_op_prepare_multicast) |
1239 | * has changed, no bit in changed_flags is set. To handle this |
1240 | * situation, we do not return if changed_flags is 0. If we do so, |
1241 | * we will have some issue with IPv6 which uses multicast for link |
1242 | * layer address resolution. |
1243 | */ |
1244 | if (*new_flags & FIF_ALLMULTI) |
1245 | zd_mc_add_all(hash: &hash); |
1246 | |
1247 | spin_lock_irqsave(&mac->lock, flags); |
1248 | mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL); |
1249 | mac->pass_ctrl = !!(*new_flags & FIF_CONTROL); |
1250 | mac->multicast_hash = hash; |
1251 | spin_unlock_irqrestore(lock: &mac->lock, flags); |
1252 | |
1253 | zd_chip_set_multicast_hash(chip: &mac->chip, hash: &hash); |
1254 | |
1255 | if (changed_flags & FIF_CONTROL) { |
1256 | r = set_rx_filter(mac); |
1257 | if (r) |
1258 | dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n" , r); |
1259 | } |
1260 | |
1261 | /* no handling required for FIF_OTHER_BSS as we don't currently |
1262 | * do BSSID filtering */ |
1263 | /* FIXME: in future it would be nice to enable the probe response |
1264 | * filter (so that the driver doesn't see them) until |
1265 | * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd |
1266 | * have to schedule work to enable prbresp reception, which might |
1267 | * happen too late. For now we'll just listen and forward them all the |
1268 | * time. */ |
1269 | } |
1270 | |
1271 | static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble) |
1272 | { |
1273 | mutex_lock(&mac->chip.mutex); |
1274 | zd_chip_set_rts_cts_rate_locked(chip: &mac->chip, preamble: short_preamble); |
1275 | mutex_unlock(lock: &mac->chip.mutex); |
1276 | } |
1277 | |
1278 | static void zd_op_bss_info_changed(struct ieee80211_hw *hw, |
1279 | struct ieee80211_vif *vif, |
1280 | struct ieee80211_bss_conf *bss_conf, |
1281 | u64 changes) |
1282 | { |
1283 | struct zd_mac *mac = zd_hw_mac(hw); |
1284 | int associated; |
1285 | |
1286 | dev_dbg_f(zd_mac_dev(mac), "changes: %llx\n" , changes); |
1287 | |
1288 | if (mac->type == NL80211_IFTYPE_MESH_POINT || |
1289 | mac->type == NL80211_IFTYPE_ADHOC || |
1290 | mac->type == NL80211_IFTYPE_AP) { |
1291 | associated = true; |
1292 | if (changes & BSS_CHANGED_BEACON) { |
1293 | struct sk_buff *beacon = ieee80211_beacon_get(hw, vif, |
1294 | link_id: 0); |
1295 | |
1296 | if (beacon) { |
1297 | zd_chip_disable_hwint(chip: &mac->chip); |
1298 | zd_mac_config_beacon(hw, beacon, in_intr: false); |
1299 | zd_chip_enable_hwint(chip: &mac->chip); |
1300 | } |
1301 | } |
1302 | |
1303 | if (changes & BSS_CHANGED_BEACON_ENABLED) { |
1304 | u16 interval = 0; |
1305 | u8 period = 0; |
1306 | |
1307 | if (bss_conf->enable_beacon) { |
1308 | period = bss_conf->dtim_period; |
1309 | interval = bss_conf->beacon_int; |
1310 | } |
1311 | |
1312 | spin_lock_irq(lock: &mac->lock); |
1313 | mac->beacon.period = period; |
1314 | mac->beacon.interval = interval; |
1315 | mac->beacon.last_update = jiffies; |
1316 | spin_unlock_irq(lock: &mac->lock); |
1317 | |
1318 | zd_set_beacon_interval(chip: &mac->chip, interval, dtim_period: period, |
1319 | type: mac->type); |
1320 | } |
1321 | } else |
1322 | associated = is_valid_ether_addr(addr: bss_conf->bssid); |
1323 | |
1324 | spin_lock_irq(lock: &mac->lock); |
1325 | mac->associated = associated; |
1326 | spin_unlock_irq(lock: &mac->lock); |
1327 | |
1328 | /* TODO: do hardware bssid filtering */ |
1329 | |
1330 | if (changes & BSS_CHANGED_ERP_PREAMBLE) { |
1331 | spin_lock_irq(lock: &mac->lock); |
1332 | mac->short_preamble = bss_conf->use_short_preamble; |
1333 | spin_unlock_irq(lock: &mac->lock); |
1334 | |
1335 | set_rts_cts(mac, short_preamble: bss_conf->use_short_preamble); |
1336 | } |
1337 | } |
1338 | |
1339 | static u64 zd_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) |
1340 | { |
1341 | struct zd_mac *mac = zd_hw_mac(hw); |
1342 | return zd_chip_get_tsf(chip: &mac->chip); |
1343 | } |
1344 | |
1345 | static const struct ieee80211_ops zd_ops = { |
1346 | .add_chanctx = ieee80211_emulate_add_chanctx, |
1347 | .remove_chanctx = ieee80211_emulate_remove_chanctx, |
1348 | .change_chanctx = ieee80211_emulate_change_chanctx, |
1349 | .switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx, |
1350 | .tx = zd_op_tx, |
1351 | .wake_tx_queue = ieee80211_handle_wake_tx_queue, |
1352 | .start = zd_op_start, |
1353 | .stop = zd_op_stop, |
1354 | .add_interface = zd_op_add_interface, |
1355 | .remove_interface = zd_op_remove_interface, |
1356 | .config = zd_op_config, |
1357 | .prepare_multicast = zd_op_prepare_multicast, |
1358 | .configure_filter = zd_op_configure_filter, |
1359 | .bss_info_changed = zd_op_bss_info_changed, |
1360 | .get_tsf = zd_op_get_tsf, |
1361 | }; |
1362 | |
1363 | struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) |
1364 | { |
1365 | struct zd_mac *mac; |
1366 | struct ieee80211_hw *hw; |
1367 | |
1368 | hw = ieee80211_alloc_hw(priv_data_len: sizeof(struct zd_mac), ops: &zd_ops); |
1369 | if (!hw) { |
1370 | dev_dbg_f(&intf->dev, "out of memory\n" ); |
1371 | return NULL; |
1372 | } |
1373 | |
1374 | mac = zd_hw_mac(hw); |
1375 | |
1376 | memset(mac, 0, sizeof(*mac)); |
1377 | spin_lock_init(&mac->lock); |
1378 | mac->hw = hw; |
1379 | |
1380 | mac->type = NL80211_IFTYPE_UNSPECIFIED; |
1381 | |
1382 | memcpy(mac->channels, zd_channels, sizeof(zd_channels)); |
1383 | memcpy(mac->rates, zd_rates, sizeof(zd_rates)); |
1384 | mac->band.n_bitrates = ARRAY_SIZE(zd_rates); |
1385 | mac->band.bitrates = mac->rates; |
1386 | mac->band.n_channels = ARRAY_SIZE(zd_channels); |
1387 | mac->band.channels = mac->channels; |
1388 | |
1389 | hw->wiphy->bands[NL80211_BAND_2GHZ] = &mac->band; |
1390 | |
1391 | ieee80211_hw_set(hw, MFP_CAPABLE); |
1392 | ieee80211_hw_set(hw, HOST_BROADCAST_PS_BUFFERING); |
1393 | ieee80211_hw_set(hw, RX_INCLUDES_FCS); |
1394 | ieee80211_hw_set(hw, SIGNAL_UNSPEC); |
1395 | |
1396 | hw->wiphy->interface_modes = |
1397 | BIT(NL80211_IFTYPE_MESH_POINT) | |
1398 | BIT(NL80211_IFTYPE_STATION) | |
1399 | BIT(NL80211_IFTYPE_ADHOC) | |
1400 | BIT(NL80211_IFTYPE_AP); |
1401 | |
1402 | wiphy_ext_feature_set(wiphy: hw->wiphy, ftidx: NL80211_EXT_FEATURE_CQM_RSSI_LIST); |
1403 | |
1404 | hw->max_signal = 100; |
1405 | hw->queues = 1; |
1406 | hw->extra_tx_headroom = sizeof(struct zd_ctrlset); |
1407 | |
1408 | /* |
1409 | * Tell mac80211 that we support multi rate retries |
1410 | */ |
1411 | hw->max_rates = IEEE80211_TX_MAX_RATES; |
1412 | hw->max_rate_tries = 18; /* 9 rates * 2 retries/rate */ |
1413 | |
1414 | skb_queue_head_init(list: &mac->ack_wait_queue); |
1415 | mac->ack_pending = 0; |
1416 | |
1417 | zd_chip_init(chip: &mac->chip, hw, intf); |
1418 | housekeeping_init(mac); |
1419 | beacon_init(mac); |
1420 | INIT_WORK(&mac->process_intr, zd_process_intr); |
1421 | |
1422 | SET_IEEE80211_DEV(hw, dev: &intf->dev); |
1423 | return hw; |
1424 | } |
1425 | |
1426 | #define BEACON_WATCHDOG_DELAY round_jiffies_relative(HZ) |
1427 | |
1428 | static void beacon_watchdog_handler(struct work_struct *work) |
1429 | { |
1430 | struct zd_mac *mac = |
1431 | container_of(work, struct zd_mac, beacon.watchdog_work.work); |
1432 | struct sk_buff *beacon; |
1433 | unsigned long timeout; |
1434 | int interval, period; |
1435 | |
1436 | if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) |
1437 | goto rearm; |
1438 | if (mac->type != NL80211_IFTYPE_AP || !mac->vif) |
1439 | goto rearm; |
1440 | |
1441 | spin_lock_irq(lock: &mac->lock); |
1442 | interval = mac->beacon.interval; |
1443 | period = mac->beacon.period; |
1444 | timeout = mac->beacon.last_update + |
1445 | msecs_to_jiffies(m: interval * 1024 / 1000) * 3; |
1446 | spin_unlock_irq(lock: &mac->lock); |
1447 | |
1448 | if (interval > 0 && time_is_before_jiffies(timeout)) { |
1449 | dev_dbg_f(zd_mac_dev(mac), "beacon interrupt stalled, " |
1450 | "restarting. " |
1451 | "(interval: %d, dtim: %d)\n" , |
1452 | interval, period); |
1453 | |
1454 | zd_chip_disable_hwint(chip: &mac->chip); |
1455 | |
1456 | beacon = ieee80211_beacon_get(hw: mac->hw, vif: mac->vif, link_id: 0); |
1457 | if (beacon) { |
1458 | zd_mac_free_cur_beacon(mac); |
1459 | |
1460 | zd_mac_config_beacon(hw: mac->hw, beacon, in_intr: false); |
1461 | } |
1462 | |
1463 | zd_set_beacon_interval(chip: &mac->chip, interval, dtim_period: period, type: mac->type); |
1464 | |
1465 | zd_chip_enable_hwint(chip: &mac->chip); |
1466 | |
1467 | spin_lock_irq(lock: &mac->lock); |
1468 | mac->beacon.last_update = jiffies; |
1469 | spin_unlock_irq(lock: &mac->lock); |
1470 | } |
1471 | |
1472 | rearm: |
1473 | queue_delayed_work(wq: zd_workqueue, dwork: &mac->beacon.watchdog_work, |
1474 | BEACON_WATCHDOG_DELAY); |
1475 | } |
1476 | |
1477 | static void beacon_init(struct zd_mac *mac) |
1478 | { |
1479 | INIT_DELAYED_WORK(&mac->beacon.watchdog_work, beacon_watchdog_handler); |
1480 | } |
1481 | |
1482 | static void beacon_enable(struct zd_mac *mac) |
1483 | { |
1484 | dev_dbg_f(zd_mac_dev(mac), "\n" ); |
1485 | |
1486 | mac->beacon.last_update = jiffies; |
1487 | queue_delayed_work(wq: zd_workqueue, dwork: &mac->beacon.watchdog_work, |
1488 | BEACON_WATCHDOG_DELAY); |
1489 | } |
1490 | |
1491 | static void beacon_disable(struct zd_mac *mac) |
1492 | { |
1493 | dev_dbg_f(zd_mac_dev(mac), "\n" ); |
1494 | cancel_delayed_work_sync(dwork: &mac->beacon.watchdog_work); |
1495 | |
1496 | zd_mac_free_cur_beacon(mac); |
1497 | } |
1498 | |
1499 | #define LINK_LED_WORK_DELAY HZ |
1500 | |
1501 | static void link_led_handler(struct work_struct *work) |
1502 | { |
1503 | struct zd_mac *mac = |
1504 | container_of(work, struct zd_mac, housekeeping.link_led_work.work); |
1505 | struct zd_chip *chip = &mac->chip; |
1506 | int is_associated; |
1507 | int r; |
1508 | |
1509 | if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) |
1510 | goto requeue; |
1511 | |
1512 | spin_lock_irq(lock: &mac->lock); |
1513 | is_associated = mac->associated; |
1514 | spin_unlock_irq(lock: &mac->lock); |
1515 | |
1516 | r = zd_chip_control_leds(chip, |
1517 | status: is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING); |
1518 | if (r) |
1519 | dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n" , r); |
1520 | |
1521 | requeue: |
1522 | queue_delayed_work(wq: zd_workqueue, dwork: &mac->housekeeping.link_led_work, |
1523 | LINK_LED_WORK_DELAY); |
1524 | } |
1525 | |
1526 | static void housekeeping_init(struct zd_mac *mac) |
1527 | { |
1528 | INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler); |
1529 | } |
1530 | |
1531 | static void housekeeping_enable(struct zd_mac *mac) |
1532 | { |
1533 | dev_dbg_f(zd_mac_dev(mac), "\n" ); |
1534 | queue_delayed_work(wq: zd_workqueue, dwork: &mac->housekeeping.link_led_work, |
1535 | delay: 0); |
1536 | } |
1537 | |
1538 | static void housekeeping_disable(struct zd_mac *mac) |
1539 | { |
1540 | dev_dbg_f(zd_mac_dev(mac), "\n" ); |
1541 | cancel_delayed_work_sync(dwork: &mac->housekeeping.link_led_work); |
1542 | zd_chip_control_leds(chip: &mac->chip, status: ZD_LED_OFF); |
1543 | } |
1544 | |