1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright 2000-2020 Broadcom Inc. All rights reserved.
4 *
5 *
6 * Name: mpi2_init.h
7 * Title: MPI SCSI initiator mode messages and structures
8 * Creation Date: June 23, 2006
9 *
10 * mpi2_init.h Version: 02.00.21
11 *
12 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
13 * prefix are for use only on MPI v2.5 products, and must not be used
14 * with MPI v2.0 products. Unless otherwise noted, names beginning with
15 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
16 *
17 * Version History
18 * ---------------
19 *
20 * Date Version Description
21 * -------- -------- ------------------------------------------------------
22 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
23 * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
24 * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
25 * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
26 * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
27 * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
28 * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
29 * Control field Task Attribute flags.
30 * Moved LUN field defines to mpi2.h becasue they are
31 * common to many structures.
32 * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
33 * Query Asynchronous Event.
34 * Defined two new bits in the SlotStatus field of the SCSI
35 * Enclosure Processor Request and Reply.
36 * 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
37 * both SCSI IO Error Reply and SCSI Task Management Reply.
38 * Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
39 * Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
40 * 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
41 * 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
42 * 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
43 * 11-18-11 02.00.12 Incorporating additions for MPI v2.5.
44 * 02-06-12 02.00.13 Added alternate defines for Task Priority / Command
45 * Priority to match SAM-4.
46 * Added EEDPErrorOffset to MPI2_SCSI_IO_REPLY.
47 * 07-10-12 02.00.14 Added MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION.
48 * 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
49 * replacing the Reserved4 field.
50 * 11-18-14 02.00.16 Updated copyright information.
51 * 03-16-15 02.00.17 Updated for MPI v2.6.
52 * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
53 * Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
54 * MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
55 * 08-26-15 02.00.18 Added SCSITASKMGMT_MSGFLAGS for Target Reset.
56 * 12-18-15 02.00.19 Added EEDPObservedValue added to SCSI IO Reply message.
57 * 01-04-16 02.00.20 Modified EEDP reported values in SCSI IO Reply message.
58 * 01-21-16 02.00.21 Modified MPI26_SCSITASKMGMT_MSGFLAGS_PCIE* defines to
59 * be unique within first 32 characters.
60 * --------------------------------------------------------------------------
61 */
62
63#ifndef MPI2_INIT_H
64#define MPI2_INIT_H
65
66/*****************************************************************************
67*
68* SCSI Initiator Messages
69*
70*****************************************************************************/
71
72/****************************************************************************
73* SCSI IO messages and associated structures
74****************************************************************************/
75
76typedef struct _MPI2_SCSI_IO_CDB_EEDP32 {
77 U8 CDB[20]; /*0x00 */
78 __be32 PrimaryReferenceTag; /*0x14 */
79 U16 PrimaryApplicationTag; /*0x18 */
80 U16 PrimaryApplicationTagMask; /*0x1A */
81 U32 TransferLength; /*0x1C */
82} MPI2_SCSI_IO_CDB_EEDP32, *PTR_MPI2_SCSI_IO_CDB_EEDP32,
83 Mpi2ScsiIoCdbEedp32_t, *pMpi2ScsiIoCdbEedp32_t;
84
85/*MPI v2.0 CDB field */
86typedef union _MPI2_SCSI_IO_CDB_UNION {
87 U8 CDB32[32];
88 MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
89 MPI2_SGE_SIMPLE_UNION SGE;
90} MPI2_SCSI_IO_CDB_UNION, *PTR_MPI2_SCSI_IO_CDB_UNION,
91 Mpi2ScsiIoCdb_t, *pMpi2ScsiIoCdb_t;
92
93/*MPI v2.0 SCSI IO Request Message */
94typedef struct _MPI2_SCSI_IO_REQUEST {
95 U16 DevHandle; /*0x00 */
96 U8 ChainOffset; /*0x02 */
97 U8 Function; /*0x03 */
98 U16 Reserved1; /*0x04 */
99 U8 Reserved2; /*0x06 */
100 U8 MsgFlags; /*0x07 */
101 U8 VP_ID; /*0x08 */
102 U8 VF_ID; /*0x09 */
103 U16 Reserved3; /*0x0A */
104 U32 SenseBufferLowAddress; /*0x0C */
105 U16 SGLFlags; /*0x10 */
106 U8 SenseBufferLength; /*0x12 */
107 U8 Reserved4; /*0x13 */
108 U8 SGLOffset0; /*0x14 */
109 U8 SGLOffset1; /*0x15 */
110 U8 SGLOffset2; /*0x16 */
111 U8 SGLOffset3; /*0x17 */
112 U32 SkipCount; /*0x18 */
113 U32 DataLength; /*0x1C */
114 U32 BidirectionalDataLength; /*0x20 */
115 U16 IoFlags; /*0x24 */
116 U16 EEDPFlags; /*0x26 */
117 U32 EEDPBlockSize; /*0x28 */
118 U32 SecondaryReferenceTag; /*0x2C */
119 U16 SecondaryApplicationTag; /*0x30 */
120 U16 ApplicationTagTranslationMask; /*0x32 */
121 U8 LUN[8]; /*0x34 */
122 U32 Control; /*0x3C */
123 MPI2_SCSI_IO_CDB_UNION CDB; /*0x40 */
124
125#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
126 MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
127#endif
128
129 MPI2_SGE_IO_UNION SGL; /*0x60 */
130
131} MPI2_SCSI_IO_REQUEST, *PTR_MPI2_SCSI_IO_REQUEST,
132 Mpi2SCSIIORequest_t, *pMpi2SCSIIORequest_t;
133
134/*SCSI IO MsgFlags bits */
135
136/*MsgFlags for SenseBufferAddressSpace */
137#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
138#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
139#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
140#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
141#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
142#define MPI26_SCSIIO_MSGFLAGS_IOCCTL_SENSE_ADDR (0x08)
143
144/*SCSI IO SGLFlags bits */
145
146/*base values for Data Location Address Space */
147#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
148#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
149#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
150#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
151#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
152
153/*base values for Type */
154#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
155#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
156#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
157#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
158
159/*shift values for each sub-field */
160#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
161#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
162#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
163#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
164
165/*number of SGLOffset fields */
166#define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
167
168/*SCSI IO IoFlags bits */
169
170/*Large CDB Address Space */
171#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
172#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
173#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
174#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
175#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
176
177#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
178#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
179#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
180#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
181#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
182
183/*SCSI IO EEDPFlags bits */
184
185#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
186#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
187#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
188#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
189
190#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
191#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
192#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
193
194#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
195
196#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
197#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
198#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
199#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
200#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
201#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
202#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
203#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
204
205/*SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
206
207/*SCSI IO Control bits */
208#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
209#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
210
211#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
212#define MPI2_SCSIIO_CONTROL_SHIFT_DATADIRECTION (24)
213#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
214#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
215#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
216#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
217
218#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
219#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
220/*alternate name for the previous field; called Command Priority in SAM-4 */
221#define MPI2_SCSIIO_CONTROL_CMDPRI_MASK (0x00007800)
222#define MPI2_SCSIIO_CONTROL_CMDPRI_SHIFT (11)
223
224#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
225#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
226#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
227#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
228#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
229
230#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
231#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
232#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
233#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
234
235/*MPI v2.5 CDB field */
236typedef union _MPI25_SCSI_IO_CDB_UNION {
237 U8 CDB32[32];
238 MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
239 MPI2_IEEE_SGE_SIMPLE64 SGE;
240} MPI25_SCSI_IO_CDB_UNION, *PTR_MPI25_SCSI_IO_CDB_UNION,
241 Mpi25ScsiIoCdb_t, *pMpi25ScsiIoCdb_t;
242
243/*MPI v2.5/2.6 SCSI IO Request Message */
244typedef struct _MPI25_SCSI_IO_REQUEST {
245 U16 DevHandle; /*0x00 */
246 U8 ChainOffset; /*0x02 */
247 U8 Function; /*0x03 */
248 U16 Reserved1; /*0x04 */
249 U8 Reserved2; /*0x06 */
250 U8 MsgFlags; /*0x07 */
251 U8 VP_ID; /*0x08 */
252 U8 VF_ID; /*0x09 */
253 U16 Reserved3; /*0x0A */
254 U32 SenseBufferLowAddress; /*0x0C */
255 U8 DMAFlags; /*0x10 */
256 U8 Reserved5; /*0x11 */
257 U8 SenseBufferLength; /*0x12 */
258 U8 Reserved4; /*0x13 */
259 U8 SGLOffset0; /*0x14 */
260 U8 SGLOffset1; /*0x15 */
261 U8 SGLOffset2; /*0x16 */
262 U8 SGLOffset3; /*0x17 */
263 U32 SkipCount; /*0x18 */
264 U32 DataLength; /*0x1C */
265 U32 BidirectionalDataLength; /*0x20 */
266 U16 IoFlags; /*0x24 */
267 U16 EEDPFlags; /*0x26 */
268 U16 EEDPBlockSize; /*0x28 */
269 U16 Reserved6; /*0x2A */
270 U32 SecondaryReferenceTag; /*0x2C */
271 U16 SecondaryApplicationTag; /*0x30 */
272 U16 ApplicationTagTranslationMask; /*0x32 */
273 U8 LUN[8]; /*0x34 */
274 U32 Control; /*0x3C */
275 MPI25_SCSI_IO_CDB_UNION CDB; /*0x40 */
276
277#ifdef MPI25_SCSI_IO_VENDOR_UNIQUE_REGION /*typically this is left undefined */
278 MPI25_SCSI_IO_VENDOR_UNIQUE VendorRegion;
279#endif
280
281 MPI25_SGE_IO_UNION SGL; /*0x60 */
282
283} MPI25_SCSI_IO_REQUEST, *PTR_MPI25_SCSI_IO_REQUEST,
284 Mpi25SCSIIORequest_t, *pMpi25SCSIIORequest_t;
285
286/*use MPI2_SCSIIO_MSGFLAGS_ defines for the MsgFlags field */
287
288/*Defines for the DMAFlags field
289 * Each setting affects 4 SGLS, from SGL0 to SGL3.
290 * D = Data
291 * C = Cache DIF
292 * I = Interleaved
293 * H = Host DIF
294 */
295#define MPI25_SCSIIO_DMAFLAGS_OP_MASK (0x0F)
296#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_D (0x00)
297#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_C (0x01)
298#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_D_I (0x02)
299#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_C (0x03)
300#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_C_I (0x04)
301#define MPI25_SCSIIO_DMAFLAGS_OP_D_D_I_I (0x05)
302#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_C (0x06)
303#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_C_I (0x07)
304#define MPI25_SCSIIO_DMAFLAGS_OP_D_C_I_I (0x08)
305#define MPI25_SCSIIO_DMAFLAGS_OP_D_I_I_I (0x09)
306#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_D (0x0A)
307#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_C (0x0B)
308#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_D_I (0x0C)
309#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_C (0x0D)
310#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_C_I (0x0E)
311#define MPI25_SCSIIO_DMAFLAGS_OP_D_H_I_I (0x0F)
312
313/*number of SGLOffset fields */
314#define MPI25_SCSIIO_NUM_SGLOFFSETS (4)
315
316/*defines for the IoFlags field */
317#define MPI25_SCSIIO_IOFLAGS_IO_PATH_MASK (0xC000)
318#define MPI25_SCSIIO_IOFLAGS_NORMAL_PATH (0x0000)
319#define MPI25_SCSIIO_IOFLAGS_FAST_PATH (0x4000)
320
321#define MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH (0x2000)
322#define MPI25_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
323#define MPI25_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
324#define MPI26_SCSIIO_IOFLAGS_PORT_REQUEST (0x0400)
325#define MPI25_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
326
327/*MPI v2.5 defines for the EEDPFlags bits */
328/*use MPI2_SCSIIO_EEDPFLAGS_ defines for the other EEDPFlags bits */
329#define MPI25_SCSIIO_EEDPFLAGS_ESCAPE_MODE_MASK (0x00C0)
330#define MPI25_SCSIIO_EEDPFLAGS_COMPATIBLE_MODE (0x0000)
331#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040)
332#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_DISABLE_MODE (0x0080)
333#define MPI25_SCSIIO_EEDPFLAGS_APPTAG_REFTAG_DISABLE_MODE (0x00C0)
334
335#define MPI25_SCSIIO_EEDPFLAGS_HOST_GUARD_METHOD_MASK (0x0030)
336#define MPI25_SCSIIO_EEDPFLAGS_T10_CRC_HOST_GUARD (0x0000)
337#define MPI25_SCSIIO_EEDPFLAGS_IP_CHKSUM_HOST_GUARD (0x0010)
338
339/*use MPI2_LUN_ defines from mpi2.h for the LUN field */
340
341/*use MPI2_SCSIIO_CONTROL_ defines for the Control field */
342
343/*NOTE: The SCSI IO Reply is nearly the same for MPI 2.0 and MPI 2.5, so
344 * MPI2_SCSI_IO_REPLY is used for both.
345 */
346
347/*SCSI IO Error Reply Message */
348typedef struct _MPI2_SCSI_IO_REPLY {
349 U16 DevHandle; /*0x00 */
350 U8 MsgLength; /*0x02 */
351 U8 Function; /*0x03 */
352 U16 Reserved1; /*0x04 */
353 U8 Reserved2; /*0x06 */
354 U8 MsgFlags; /*0x07 */
355 U8 VP_ID; /*0x08 */
356 U8 VF_ID; /*0x09 */
357 U16 Reserved3; /*0x0A */
358 U8 SCSIStatus; /*0x0C */
359 U8 SCSIState; /*0x0D */
360 U16 IOCStatus; /*0x0E */
361 U32 IOCLogInfo; /*0x10 */
362 U32 TransferCount; /*0x14 */
363 U32 SenseCount; /*0x18 */
364 U32 ResponseInfo; /*0x1C */
365 U16 TaskTag; /*0x20 */
366 U16 SCSIStatusQualifier; /* 0x22 */
367 U32 BidirectionalTransferCount; /*0x24 */
368 /* MPI 2.5+ only; Reserved in MPI 2.0 */
369 U32 EEDPErrorOffset; /* 0x28 */
370 /* MPI 2.5+ only; Reserved in MPI 2.0 */
371 U16 EEDPObservedAppTag; /* 0x2C */
372 /* MPI 2.5+ only; Reserved in MPI 2.0 */
373 U16 EEDPObservedGuard; /* 0x2E */
374 /* MPI 2.5+ only; Reserved in MPI 2.0 */
375 U32 EEDPObservedRefTag; /* 0x30 */
376} MPI2_SCSI_IO_REPLY, *PTR_MPI2_SCSI_IO_REPLY,
377 Mpi2SCSIIOReply_t, *pMpi2SCSIIOReply_t;
378
379/*SCSI IO Reply MsgFlags bits */
380#define MPI26_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
381#define MPI26_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x02)
382#define MPI26_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x04)
383
384/*SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
385
386#define MPI2_SCSI_STATUS_GOOD (0x00)
387#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
388#define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
389#define MPI2_SCSI_STATUS_BUSY (0x08)
390#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
391#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
392#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
393#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /*obsolete */
394#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
395#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
396#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
397
398/*SCSI IO Reply SCSIState flags */
399
400#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
401#define MPI2_SCSI_STATE_TERMINATED (0x08)
402#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
403#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
404#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
405
406/*masks and shifts for the ResponseInfo field */
407
408#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
409#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
410
411#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
412
413/****************************************************************************
414* SCSI Task Management messages
415****************************************************************************/
416
417/*SCSI Task Management Request Message */
418typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST {
419 U16 DevHandle; /*0x00 */
420 U8 ChainOffset; /*0x02 */
421 U8 Function; /*0x03 */
422 U8 Reserved1; /*0x04 */
423 U8 TaskType; /*0x05 */
424 U8 Reserved2; /*0x06 */
425 U8 MsgFlags; /*0x07 */
426 U8 VP_ID; /*0x08 */
427 U8 VF_ID; /*0x09 */
428 U16 Reserved3; /*0x0A */
429 U8 LUN[8]; /*0x0C */
430 U32 Reserved4[7]; /*0x14 */
431 U16 TaskMID; /*0x30 */
432 U16 Reserved5; /*0x32 */
433} MPI2_SCSI_TASK_MANAGE_REQUEST,
434 *PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
435 Mpi2SCSITaskManagementRequest_t,
436 *pMpi2SCSITaskManagementRequest_t;
437
438/*TaskType values */
439
440#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
441#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
442#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
443#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
444#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
445#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
446#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
447#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
448#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
449
450/*obsolete TaskType name */
451#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
452 (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
453
454/*MsgFlags bits */
455
456#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
457#define MPI26_SCSITASKMGMT_MSGFLAGS_HOT_RESET_PCIE (0x00)
458#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
459#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
460#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
461
462#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
463#define MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE (0x18)
464
465/*SCSI Task Management Reply Message */
466typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY {
467 U16 DevHandle; /*0x00 */
468 U8 MsgLength; /*0x02 */
469 U8 Function; /*0x03 */
470 U8 ResponseCode; /*0x04 */
471 U8 TaskType; /*0x05 */
472 U8 Reserved1; /*0x06 */
473 U8 MsgFlags; /*0x07 */
474 U8 VP_ID; /*0x08 */
475 U8 VF_ID; /*0x09 */
476 U16 Reserved2; /*0x0A */
477 U16 Reserved3; /*0x0C */
478 U16 IOCStatus; /*0x0E */
479 U32 IOCLogInfo; /*0x10 */
480 U32 TerminationCount; /*0x14 */
481 U32 ResponseInfo; /*0x18 */
482} MPI2_SCSI_TASK_MANAGE_REPLY,
483 *PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
484 Mpi2SCSITaskManagementReply_t, *pMpi2SCSIManagementReply_t;
485
486/*ResponseCode values */
487
488#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
489#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
490#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
491#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
492#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
493#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
494#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
495#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
496
497/*masks and shifts for the ResponseInfo field */
498
499#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
500#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
501#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
502#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
503#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
504#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
505#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
506#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
507
508/****************************************************************************
509* SCSI Enclosure Processor messages
510****************************************************************************/
511
512/*SCSI Enclosure Processor Request Message */
513typedef struct _MPI2_SEP_REQUEST {
514 U16 DevHandle; /*0x00 */
515 U8 ChainOffset; /*0x02 */
516 U8 Function; /*0x03 */
517 U8 Action; /*0x04 */
518 U8 Flags; /*0x05 */
519 U8 Reserved1; /*0x06 */
520 U8 MsgFlags; /*0x07 */
521 U8 VP_ID; /*0x08 */
522 U8 VF_ID; /*0x09 */
523 U16 Reserved2; /*0x0A */
524 U32 SlotStatus; /*0x0C */
525 U32 Reserved3; /*0x10 */
526 U32 Reserved4; /*0x14 */
527 U32 Reserved5; /*0x18 */
528 U16 Slot; /*0x1C */
529 U16 EnclosureHandle; /*0x1E */
530} MPI2_SEP_REQUEST, *PTR_MPI2_SEP_REQUEST,
531 Mpi2SepRequest_t, *pMpi2SepRequest_t;
532
533/*Action defines */
534#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
535#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
536
537/*Flags defines */
538#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
539#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
540
541/*SlotStatus defines */
542#define MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF (0x00080000)
543#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
544#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
545#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
546#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
547#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
548#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
549#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
550#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
551#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
552#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
553#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
554
555/*SCSI Enclosure Processor Reply Message */
556typedef struct _MPI2_SEP_REPLY {
557 U16 DevHandle; /*0x00 */
558 U8 MsgLength; /*0x02 */
559 U8 Function; /*0x03 */
560 U8 Action; /*0x04 */
561 U8 Flags; /*0x05 */
562 U8 Reserved1; /*0x06 */
563 U8 MsgFlags; /*0x07 */
564 U8 VP_ID; /*0x08 */
565 U8 VF_ID; /*0x09 */
566 U16 Reserved2; /*0x0A */
567 U16 Reserved3; /*0x0C */
568 U16 IOCStatus; /*0x0E */
569 U32 IOCLogInfo; /*0x10 */
570 U32 SlotStatus; /*0x14 */
571 U32 Reserved4; /*0x18 */
572 U16 Slot; /*0x1C */
573 U16 EnclosureHandle; /*0x1E */
574} MPI2_SEP_REPLY, *PTR_MPI2_SEP_REPLY,
575 Mpi2SepReply_t, *pMpi2SepReply_t;
576
577/*SlotStatus defines */
578#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF (0x00080000)
579#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
580#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
581#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
582#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
583#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
584#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
585#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
586#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
587#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
588#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
589#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
590
591#endif
592

source code of linux/drivers/scsi/mpt3sas/mpi/mpi2_init.h