| 1 | /* SPDX-License-Identifier: GPL-2.0 */ |
|---|
| 2 | #ifndef __SOC_TI_OMAP1_USB |
|---|
| 3 | #define __SOC_TI_OMAP1_USB |
|---|
| 4 | /* |
|---|
| 5 | * Constants in this file are used all over the place, in platform |
|---|
| 6 | * code, as well as the udc, phy and ohci drivers. |
|---|
| 7 | * This is not a great design, but unlikely to get fixed after |
|---|
| 8 | * such a long time. Don't do this elsewhere. |
|---|
| 9 | */ |
|---|
| 10 | |
|---|
| 11 | #define OMAP1_OTG_BASE 0xfffb0400 |
|---|
| 12 | #define OMAP1_UDC_BASE 0xfffb4000 |
|---|
| 13 | |
|---|
| 14 | #define OMAP2_UDC_BASE 0x4805e200 |
|---|
| 15 | #define OMAP2_OTG_BASE 0x4805e300 |
|---|
| 16 | #define OTG_BASE OMAP1_OTG_BASE |
|---|
| 17 | #define UDC_BASE OMAP1_UDC_BASE |
|---|
| 18 | |
|---|
| 19 | /* |
|---|
| 20 | * OTG and transceiver registers, for OMAPs starting with ARM926 |
|---|
| 21 | */ |
|---|
| 22 | #define OTG_REV (OTG_BASE + 0x00) |
|---|
| 23 | #define OTG_SYSCON_1 (OTG_BASE + 0x04) |
|---|
| 24 | # define USB2_TRX_MODE(w) (((w)>>24)&0x07) |
|---|
| 25 | # define USB1_TRX_MODE(w) (((w)>>20)&0x07) |
|---|
| 26 | # define USB0_TRX_MODE(w) (((w)>>16)&0x07) |
|---|
| 27 | # define OTG_IDLE_EN (1 << 15) |
|---|
| 28 | # define HST_IDLE_EN (1 << 14) |
|---|
| 29 | # define DEV_IDLE_EN (1 << 13) |
|---|
| 30 | # define OTG_RESET_DONE (1 << 2) |
|---|
| 31 | # define OTG_SOFT_RESET (1 << 1) |
|---|
| 32 | #define OTG_SYSCON_2 (OTG_BASE + 0x08) |
|---|
| 33 | # define OTG_EN (1 << 31) |
|---|
| 34 | # define USBX_SYNCHRO (1 << 30) |
|---|
| 35 | # define OTG_MST16 (1 << 29) |
|---|
| 36 | # define SRP_GPDATA (1 << 28) |
|---|
| 37 | # define SRP_GPDVBUS (1 << 27) |
|---|
| 38 | # define SRP_GPUVBUS(w) (((w)>>24)&0x07) |
|---|
| 39 | # define A_WAIT_VRISE(w) (((w)>>20)&0x07) |
|---|
| 40 | # define B_ASE_BRST(w) (((w)>>16)&0x07) |
|---|
| 41 | # define SRP_DPW (1 << 14) |
|---|
| 42 | # define SRP_DATA (1 << 13) |
|---|
| 43 | # define SRP_VBUS (1 << 12) |
|---|
| 44 | # define OTG_PADEN (1 << 10) |
|---|
| 45 | # define HMC_PADEN (1 << 9) |
|---|
| 46 | # define UHOST_EN (1 << 8) |
|---|
| 47 | # define HMC_TLLSPEED (1 << 7) |
|---|
| 48 | # define HMC_TLLATTACH (1 << 6) |
|---|
| 49 | # define OTG_HMC(w) (((w)>>0)&0x3f) |
|---|
| 50 | #define OTG_CTRL (OTG_BASE + 0x0c) |
|---|
| 51 | # define OTG_USB2_EN (1 << 29) |
|---|
| 52 | # define OTG_USB2_DP (1 << 28) |
|---|
| 53 | # define OTG_USB2_DM (1 << 27) |
|---|
| 54 | # define OTG_USB1_EN (1 << 26) |
|---|
| 55 | # define OTG_USB1_DP (1 << 25) |
|---|
| 56 | # define OTG_USB1_DM (1 << 24) |
|---|
| 57 | # define OTG_USB0_EN (1 << 23) |
|---|
| 58 | # define OTG_USB0_DP (1 << 22) |
|---|
| 59 | # define OTG_USB0_DM (1 << 21) |
|---|
| 60 | # define OTG_ASESSVLD (1 << 20) |
|---|
| 61 | # define OTG_BSESSEND (1 << 19) |
|---|
| 62 | # define OTG_BSESSVLD (1 << 18) |
|---|
| 63 | # define OTG_VBUSVLD (1 << 17) |
|---|
| 64 | # define OTG_ID (1 << 16) |
|---|
| 65 | # define OTG_DRIVER_SEL (1 << 15) |
|---|
| 66 | # define OTG_A_SETB_HNPEN (1 << 12) |
|---|
| 67 | # define OTG_A_BUSREQ (1 << 11) |
|---|
| 68 | # define OTG_B_HNPEN (1 << 9) |
|---|
| 69 | # define OTG_B_BUSREQ (1 << 8) |
|---|
| 70 | # define OTG_BUSDROP (1 << 7) |
|---|
| 71 | # define OTG_PULLDOWN (1 << 5) |
|---|
| 72 | # define OTG_PULLUP (1 << 4) |
|---|
| 73 | # define OTG_DRV_VBUS (1 << 3) |
|---|
| 74 | # define OTG_PD_VBUS (1 << 2) |
|---|
| 75 | # define OTG_PU_VBUS (1 << 1) |
|---|
| 76 | # define OTG_PU_ID (1 << 0) |
|---|
| 77 | #define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ |
|---|
| 78 | # define DRIVER_SWITCH (1 << 15) |
|---|
| 79 | # define A_VBUS_ERR (1 << 13) |
|---|
| 80 | # define A_REQ_TMROUT (1 << 12) |
|---|
| 81 | # define A_SRP_DETECT (1 << 11) |
|---|
| 82 | # define B_HNP_FAIL (1 << 10) |
|---|
| 83 | # define B_SRP_TMROUT (1 << 9) |
|---|
| 84 | # define B_SRP_DONE (1 << 8) |
|---|
| 85 | # define B_SRP_STARTED (1 << 7) |
|---|
| 86 | # define OPRT_CHG (1 << 0) |
|---|
| 87 | #define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ |
|---|
| 88 | // same bits as in IRQ_EN |
|---|
| 89 | #define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ |
|---|
| 90 | # define OTGVPD (1 << 14) |
|---|
| 91 | # define OTGVPU (1 << 13) |
|---|
| 92 | # define OTGPUID (1 << 12) |
|---|
| 93 | # define USB2VDR (1 << 10) |
|---|
| 94 | # define USB2PDEN (1 << 9) |
|---|
| 95 | # define USB2PUEN (1 << 8) |
|---|
| 96 | # define USB1VDR (1 << 6) |
|---|
| 97 | # define USB1PDEN (1 << 5) |
|---|
| 98 | # define USB1PUEN (1 << 4) |
|---|
| 99 | # define USB0VDR (1 << 2) |
|---|
| 100 | # define USB0PDEN (1 << 1) |
|---|
| 101 | # define USB0PUEN (1 << 0) |
|---|
| 102 | #define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ |
|---|
| 103 | #define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ |
|---|
| 104 | |
|---|
| 105 | /*-------------------------------------------------------------------------*/ |
|---|
| 106 | |
|---|
| 107 | /* OMAP1 */ |
|---|
| 108 | #define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) |
|---|
| 109 | # define CONF_USB2_UNI_R (1 << 8) |
|---|
| 110 | # define CONF_USB1_UNI_R (1 << 7) |
|---|
| 111 | # define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) |
|---|
| 112 | # define CONF_USB0_ISOLATE_R (1 << 3) |
|---|
| 113 | # define CONF_USB_PWRDN_DM_R (1 << 2) |
|---|
| 114 | # define CONF_USB_PWRDN_DP_R (1 << 1) |
|---|
| 115 | |
|---|
| 116 | #endif |
|---|
| 117 | |
|---|
