1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
2 | /* |
3 | * ADV7343 header file |
4 | * |
5 | * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ |
6 | */ |
7 | |
8 | #ifndef ADV7343_H |
9 | #define ADV7343_H |
10 | |
11 | #define ADV7343_COMPOSITE_ID (0) |
12 | #define ADV7343_COMPONENT_ID (1) |
13 | #define ADV7343_SVIDEO_ID (2) |
14 | |
15 | /** |
16 | * struct adv7343_power_mode - power mode configuration. |
17 | * @sleep_mode: on enable the current consumption is reduced to micro ampere |
18 | * level. All DACs and the internal PLL circuit are disabled. |
19 | * Registers can be read from and written in sleep mode. |
20 | * @pll_control: PLL and oversampling control. This control allows internal |
21 | * PLL 1 circuit to be powered down and the oversampling to be |
22 | * switched off. |
23 | * @dac: array to configure power on/off DAC's 1..6 |
24 | * |
25 | * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS |
26 | * section of datasheet[1], table 17 page no 30. |
27 | * |
28 | * [1] http://www.analog.com/static/imported-files/data_sheets/ADV7342_7343.pdf |
29 | */ |
30 | struct adv7343_power_mode { |
31 | bool sleep_mode; |
32 | bool pll_control; |
33 | u32 dac[6]; |
34 | }; |
35 | |
36 | /** |
37 | * struct adv7343_sd_config - SD Only Output Configuration. |
38 | * @sd_dac_out: array configuring SD DAC Outputs 1 and 2 |
39 | */ |
40 | struct adv7343_sd_config { |
41 | /* SD only Output Configuration */ |
42 | u32 sd_dac_out[2]; |
43 | }; |
44 | |
45 | /** |
46 | * struct adv7343_platform_data - Platform data values and access functions. |
47 | * @mode_config: Configuration for power mode. |
48 | * @sd_config: SD Only Configuration. |
49 | */ |
50 | struct adv7343_platform_data { |
51 | struct adv7343_power_mode mode_config; |
52 | struct adv7343_sd_config sd_config; |
53 | }; |
54 | |
55 | #endif /* End of #ifndef ADV7343_H */ |
56 | |