1/*
2 * stmark2.c -- Support for Sysam AMCORE open board
3 *
4 * (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
5 *
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file COPYING in the main directory of this archive
8 * for more details.
9 */
10
11#include <linux/platform_device.h>
12#include <linux/mtd/partitions.h>
13#include <linux/spi/spi.h>
14#include <linux/spi/spi-fsl-dspi.h>
15#include <linux/spi/flash.h>
16#include <linux/dma-mapping.h>
17#include <asm/mcfsim.h>
18
19/*
20 * Partitioning of parallel NOR flash (39VF3201B)
21 */
22static struct mtd_partition stmark2_partitions[] = {
23 {
24 .name = "U-Boot (1024K)",
25 .size = 0x100000,
26 .offset = 0x0
27 }, {
28 .name = "Kernel+initramfs (7168K)",
29 .size = 0x700000,
30 .offset = MTDPART_OFS_APPEND
31 }, {
32 .name = "Flash Free Space (8192K)",
33 .size = MTDPART_SIZ_FULL,
34 .offset = MTDPART_OFS_APPEND
35 }
36};
37
38static struct flash_platform_data stmark2_spi_flash_data = {
39 .name = "is25lp128",
40 .parts = stmark2_partitions,
41 .nr_parts = ARRAY_SIZE(stmark2_partitions),
42 .type = "is25lp128",
43};
44
45static struct spi_board_info stmark2_board_info[] __initdata = {
46 {
47 .modalias = "m25p80",
48 .max_speed_hz = 5000000,
49 .bus_num = 0,
50 .chip_select = 1,
51 .platform_data = &stmark2_spi_flash_data,
52 .mode = SPI_MODE_3,
53 }
54};
55
56/* SPI controller data, SPI (0) */
57static struct fsl_dspi_platform_data dspi_spi0_info = {
58 .cs_num = 4,
59 .bus_num = 0,
60 .sck_cs_delay = 100,
61 .cs_sck_delay = 100,
62};
63
64static struct resource dspi_spi0_resource[] = {
65 [0] = {
66 .start = MCFDSPI_BASE0,
67 .end = MCFDSPI_BASE0 + 0xFF,
68 .flags = IORESOURCE_MEM,
69 },
70 [1] = {
71 .start = 12,
72 .end = 13,
73 .flags = IORESOURCE_DMA,
74 },
75 [2] = {
76 .start = MCF_IRQ_DSPI0,
77 .end = MCF_IRQ_DSPI0,
78 .flags = IORESOURCE_IRQ,
79 },
80};
81
82static u64 stmark2_dspi_mask = DMA_BIT_MASK(32);
83
84/* SPI controller, id = bus number */
85static struct platform_device dspi_spi0_device = {
86 .name = "fsl-dspi",
87 .id = 0,
88 .num_resources = ARRAY_SIZE(dspi_spi0_resource),
89 .resource = dspi_spi0_resource,
90 .dev = {
91 .platform_data = &dspi_spi0_info,
92 .dma_mask = &stmark2_dspi_mask,
93 .coherent_dma_mask = DMA_BIT_MASK(32),
94 },
95};
96
97static struct platform_device *stmark2_devices[] __initdata = {
98 &dspi_spi0_device,
99};
100
101/*
102 * Note: proper pin-mux setup is mandatory for proper SPI functionality.
103 */
104static int __init init_stmark2(void)
105{
106 /* DSPI0, all pins as DSPI, and using CS1 */
107 __raw_writeb(val: 0x80, addr: MCFGPIO_PAR_DSPIOWL);
108 __raw_writeb(val: 0xfc, addr: MCFGPIO_PAR_DSPIOWH);
109
110 /* Board gpio setup */
111 __raw_writeb(val: 0x00, addr: MCFGPIO_PAR_BE);
112 __raw_writeb(val: 0x00, addr: MCFGPIO_PAR_FBCTL);
113 __raw_writeb(val: 0x00, addr: MCFGPIO_PAR_CS);
114
115 /* CAN pads */
116 __raw_writeb(val: 0x50, addr: MCFGPIO_PAR_CANI2C);
117
118 platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
119
120 spi_register_board_info(info: stmark2_board_info,
121 ARRAY_SIZE(stmark2_board_info));
122
123 return 0;
124}
125
126device_initcall(init_stmark2);
127

source code of linux/arch/m68k/coldfire/stmark2.c