1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * OpenRISC head.S
4 *
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
7 * declaration.
8 *
9 * Modifications for the OpenRISC architecture:
10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
12 */
13
14#include <linux/linkage.h>
15#include <linux/threads.h>
16#include <linux/errno.h>
17#include <linux/init.h>
18#include <linux/serial_reg.h>
19#include <linux/pgtable.h>
20#include <asm/processor.h>
21#include <asm/page.h>
22#include <asm/mmu.h>
23#include <asm/thread_info.h>
24#include <asm/cache.h>
25#include <asm/spr_defs.h>
26#include <asm/asm-offsets.h>
27#include <linux/of_fdt.h>
28
29#define tophys(rd,rs) \
30 l.movhi rd,hi(-KERNELBASE) ;\
31 l.add rd,rd,rs
32
33#define CLEAR_GPR(gpr) \
34 l.movhi gpr,0x0
35
36#define LOAD_SYMBOL_2_GPR(gpr,symbol) \
37 l.movhi gpr,hi(symbol) ;\
38 l.ori gpr,gpr,lo(symbol)
39
40
41#define UART_BASE_ADD 0x90000000
42
43#define EXCEPTION_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_SM)
44#define SYSCALL_SR (SPR_SR_DME | SPR_SR_IME | SPR_SR_DCE | SPR_SR_ICE | SPR_SR_IEE | SPR_SR_TEE | SPR_SR_SM)
45
46/* ============================================[ tmp store locations ]=== */
47
48#define SPR_SHADOW_GPR(x) ((x) + SPR_GPR_BASE + 32)
49
50/*
51 * emergency_print temporary stores
52 */
53#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
54#define EMERGENCY_PRINT_STORE_GPR4 l.mtspr r0,r4,SPR_SHADOW_GPR(14)
55#define EMERGENCY_PRINT_LOAD_GPR4 l.mfspr r4,r0,SPR_SHADOW_GPR(14)
56
57#define EMERGENCY_PRINT_STORE_GPR5 l.mtspr r0,r5,SPR_SHADOW_GPR(15)
58#define EMERGENCY_PRINT_LOAD_GPR5 l.mfspr r5,r0,SPR_SHADOW_GPR(15)
59
60#define EMERGENCY_PRINT_STORE_GPR6 l.mtspr r0,r6,SPR_SHADOW_GPR(16)
61#define EMERGENCY_PRINT_LOAD_GPR6 l.mfspr r6,r0,SPR_SHADOW_GPR(16)
62
63#define EMERGENCY_PRINT_STORE_GPR7 l.mtspr r0,r7,SPR_SHADOW_GPR(7)
64#define EMERGENCY_PRINT_LOAD_GPR7 l.mfspr r7,r0,SPR_SHADOW_GPR(7)
65
66#define EMERGENCY_PRINT_STORE_GPR8 l.mtspr r0,r8,SPR_SHADOW_GPR(8)
67#define EMERGENCY_PRINT_LOAD_GPR8 l.mfspr r8,r0,SPR_SHADOW_GPR(8)
68
69#define EMERGENCY_PRINT_STORE_GPR9 l.mtspr r0,r9,SPR_SHADOW_GPR(9)
70#define EMERGENCY_PRINT_LOAD_GPR9 l.mfspr r9,r0,SPR_SHADOW_GPR(9)
71
72#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
73#define EMERGENCY_PRINT_STORE_GPR4 l.sw 0x20(r0),r4
74#define EMERGENCY_PRINT_LOAD_GPR4 l.lwz r4,0x20(r0)
75
76#define EMERGENCY_PRINT_STORE_GPR5 l.sw 0x24(r0),r5
77#define EMERGENCY_PRINT_LOAD_GPR5 l.lwz r5,0x24(r0)
78
79#define EMERGENCY_PRINT_STORE_GPR6 l.sw 0x28(r0),r6
80#define EMERGENCY_PRINT_LOAD_GPR6 l.lwz r6,0x28(r0)
81
82#define EMERGENCY_PRINT_STORE_GPR7 l.sw 0x2c(r0),r7
83#define EMERGENCY_PRINT_LOAD_GPR7 l.lwz r7,0x2c(r0)
84
85#define EMERGENCY_PRINT_STORE_GPR8 l.sw 0x30(r0),r8
86#define EMERGENCY_PRINT_LOAD_GPR8 l.lwz r8,0x30(r0)
87
88#define EMERGENCY_PRINT_STORE_GPR9 l.sw 0x34(r0),r9
89#define EMERGENCY_PRINT_LOAD_GPR9 l.lwz r9,0x34(r0)
90
91#endif
92
93/*
94 * TLB miss handlers temorary stores
95 */
96#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
97#define EXCEPTION_STORE_GPR2 l.mtspr r0,r2,SPR_SHADOW_GPR(2)
98#define EXCEPTION_LOAD_GPR2 l.mfspr r2,r0,SPR_SHADOW_GPR(2)
99
100#define EXCEPTION_STORE_GPR3 l.mtspr r0,r3,SPR_SHADOW_GPR(3)
101#define EXCEPTION_LOAD_GPR3 l.mfspr r3,r0,SPR_SHADOW_GPR(3)
102
103#define EXCEPTION_STORE_GPR4 l.mtspr r0,r4,SPR_SHADOW_GPR(4)
104#define EXCEPTION_LOAD_GPR4 l.mfspr r4,r0,SPR_SHADOW_GPR(4)
105
106#define EXCEPTION_STORE_GPR5 l.mtspr r0,r5,SPR_SHADOW_GPR(5)
107#define EXCEPTION_LOAD_GPR5 l.mfspr r5,r0,SPR_SHADOW_GPR(5)
108
109#define EXCEPTION_STORE_GPR6 l.mtspr r0,r6,SPR_SHADOW_GPR(6)
110#define EXCEPTION_LOAD_GPR6 l.mfspr r6,r0,SPR_SHADOW_GPR(6)
111
112#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
113#define EXCEPTION_STORE_GPR2 l.sw 0x64(r0),r2
114#define EXCEPTION_LOAD_GPR2 l.lwz r2,0x64(r0)
115
116#define EXCEPTION_STORE_GPR3 l.sw 0x68(r0),r3
117#define EXCEPTION_LOAD_GPR3 l.lwz r3,0x68(r0)
118
119#define EXCEPTION_STORE_GPR4 l.sw 0x6c(r0),r4
120#define EXCEPTION_LOAD_GPR4 l.lwz r4,0x6c(r0)
121
122#define EXCEPTION_STORE_GPR5 l.sw 0x70(r0),r5
123#define EXCEPTION_LOAD_GPR5 l.lwz r5,0x70(r0)
124
125#define EXCEPTION_STORE_GPR6 l.sw 0x74(r0),r6
126#define EXCEPTION_LOAD_GPR6 l.lwz r6,0x74(r0)
127
128#endif
129
130/*
131 * EXCEPTION_HANDLE temporary stores
132 */
133
134#ifdef CONFIG_OPENRISC_HAVE_SHADOW_GPRS
135#define EXCEPTION_T_STORE_GPR30 l.mtspr r0,r30,SPR_SHADOW_GPR(30)
136#define EXCEPTION_T_LOAD_GPR30(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(30)
137
138#define EXCEPTION_T_STORE_GPR10 l.mtspr r0,r10,SPR_SHADOW_GPR(10)
139#define EXCEPTION_T_LOAD_GPR10(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(10)
140
141#define EXCEPTION_T_STORE_SP l.mtspr r0,r1,SPR_SHADOW_GPR(1)
142#define EXCEPTION_T_LOAD_SP(reg) l.mfspr reg,r0,SPR_SHADOW_GPR(1)
143
144#else /* !CONFIG_OPENRISC_HAVE_SHADOW_GPRS */
145#define EXCEPTION_T_STORE_GPR30 l.sw 0x78(r0),r30
146#define EXCEPTION_T_LOAD_GPR30(reg) l.lwz reg,0x78(r0)
147
148#define EXCEPTION_T_STORE_GPR10 l.sw 0x7c(r0),r10
149#define EXCEPTION_T_LOAD_GPR10(reg) l.lwz reg,0x7c(r0)
150
151#define EXCEPTION_T_STORE_SP l.sw 0x80(r0),r1
152#define EXCEPTION_T_LOAD_SP(reg) l.lwz reg,0x80(r0)
153#endif
154
155/* =========================================================[ macros ]=== */
156
157#ifdef CONFIG_SMP
158#define GET_CURRENT_PGD(reg,t1) \
159 LOAD_SYMBOL_2_GPR(reg,current_pgd) ;\
160 l.mfspr t1,r0,SPR_COREID ;\
161 l.slli t1,t1,2 ;\
162 l.add reg,reg,t1 ;\
163 tophys (t1,reg) ;\
164 l.lwz reg,0(t1)
165#else
166#define GET_CURRENT_PGD(reg,t1) \
167 LOAD_SYMBOL_2_GPR(reg,current_pgd) ;\
168 tophys (t1,reg) ;\
169 l.lwz reg,0(t1)
170#endif
171
172/* Load r10 from current_thread_info_set - clobbers r1 and r30 */
173#ifdef CONFIG_SMP
174#define GET_CURRENT_THREAD_INFO \
175 LOAD_SYMBOL_2_GPR(r1,current_thread_info_set) ;\
176 tophys (r30,r1) ;\
177 l.mfspr r10,r0,SPR_COREID ;\
178 l.slli r10,r10,2 ;\
179 l.add r30,r30,r10 ;\
180 /* r10: current_thread_info */ ;\
181 l.lwz r10,0(r30)
182#else
183#define GET_CURRENT_THREAD_INFO \
184 LOAD_SYMBOL_2_GPR(r1,current_thread_info_set) ;\
185 tophys (r30,r1) ;\
186 /* r10: current_thread_info */ ;\
187 l.lwz r10,0(r30)
188#endif
189
190/*
191 * DSCR: this is a common hook for handling exceptions. it will save
192 * the needed registers, set up stack and pointer to current
193 * then jump to the handler while enabling MMU
194 *
195 * PRMS: handler - a function to jump to. it has to save the
196 * remaining registers to kernel stack, call
197 * appropriate arch-independant exception handler
198 * and finaly jump to ret_from_except
199 *
200 * PREQ: unchanged state from the time exception happened
201 *
202 * POST: SAVED the following registers original value
203 * to the new created exception frame pointed to by r1
204 *
205 * r1 - ksp pointing to the new (exception) frame
206 * r4 - EEAR exception EA
207 * r10 - current pointing to current_thread_info struct
208 * r12 - syscall 0, since we didn't come from syscall
209 * r30 - handler address of the handler we'll jump to
210 *
211 * handler has to save remaining registers to the exception
212 * ksp frame *before* tainting them!
213 *
214 * NOTE: this function is not reentrant per se. reentrancy is guaranteed
215 * by processor disabling all exceptions/interrupts when exception
216 * accours.
217 *
218 * OPTM: no need to make it so wasteful to extract ksp when in user mode
219 */
220
221#define EXCEPTION_HANDLE(handler) \
222 EXCEPTION_T_STORE_GPR30 ;\
223 l.mfspr r30,r0,SPR_ESR_BASE ;\
224 l.andi r30,r30,SPR_SR_SM ;\
225 l.sfeqi r30,0 ;\
226 EXCEPTION_T_STORE_GPR10 ;\
227 l.bnf 2f /* kernel_mode */ ;\
228 EXCEPTION_T_STORE_SP /* delay slot */ ;\
2291: /* user_mode: */ ;\
230 GET_CURRENT_THREAD_INFO ;\
231 tophys (r30,r10) ;\
232 l.lwz r1,(TI_KSP)(r30) ;\
233 /* fall through */ ;\
2342: /* kernel_mode: */ ;\
235 /* create new stack frame, save only needed gprs */ ;\
236 /* r1: KSP, r10: current, r4: EEAR, r31: __pa(KSP) */ ;\
237 /* r12: temp, syscall indicator */ ;\
238 l.addi r1,r1,-(INT_FRAME_SIZE) ;\
239 /* r1 is KSP, r30 is __pa(KSP) */ ;\
240 tophys (r30,r1) ;\
241 l.sw PT_GPR12(r30),r12 ;\
242 /* r4 use for tmp before EA */ ;\
243 l.mfspr r12,r0,SPR_EPCR_BASE ;\
244 l.sw PT_PC(r30),r12 ;\
245 l.mfspr r12,r0,SPR_ESR_BASE ;\
246 l.sw PT_SR(r30),r12 ;\
247 /* save r30 */ ;\
248 EXCEPTION_T_LOAD_GPR30(r12) ;\
249 l.sw PT_GPR30(r30),r12 ;\
250 /* save r10 as was prior to exception */ ;\
251 EXCEPTION_T_LOAD_GPR10(r12) ;\
252 l.sw PT_GPR10(r30),r12 ;\
253 /* save PT_SP as was prior to exception */ ;\
254 EXCEPTION_T_LOAD_SP(r12) ;\
255 l.sw PT_SP(r30),r12 ;\
256 /* save exception r4, set r4 = EA */ ;\
257 l.sw PT_GPR4(r30),r4 ;\
258 l.mfspr r4,r0,SPR_EEAR_BASE ;\
259 /* r12 == 1 if we come from syscall */ ;\
260 CLEAR_GPR(r12) ;\
261 /* ----- turn on MMU ----- */ ;\
262 /* Carry DSX into exception SR */ ;\
263 l.mfspr r30,r0,SPR_SR ;\
264 l.andi r30,r30,SPR_SR_DSX ;\
265 l.ori r30,r30,(EXCEPTION_SR) ;\
266 l.mtspr r0,r30,SPR_ESR_BASE ;\
267 /* r30: EA address of handler */ ;\
268 LOAD_SYMBOL_2_GPR(r30,handler) ;\
269 l.mtspr r0,r30,SPR_EPCR_BASE ;\
270 l.rfe
271
272/*
273 * this doesn't work
274 *
275 *
276 * #ifdef CONFIG_JUMP_UPON_UNHANDLED_EXCEPTION
277 * #define UNHANDLED_EXCEPTION(handler) \
278 * l.ori r3,r0,0x1 ;\
279 * l.mtspr r0,r3,SPR_SR ;\
280 * l.movhi r3,hi(0xf0000100) ;\
281 * l.ori r3,r3,lo(0xf0000100) ;\
282 * l.jr r3 ;\
283 * l.nop 1
284 *
285 * #endif
286 */
287
288/* DSCR: this is the same as EXCEPTION_HANDLE(), we are just
289 * a bit more carefull (if we have a PT_SP or current pointer
290 * corruption) and set them up from 'current_set'
291 *
292 */
293#define UNHANDLED_EXCEPTION(handler) \
294 EXCEPTION_T_STORE_GPR30 ;\
295 EXCEPTION_T_STORE_GPR10 ;\
296 EXCEPTION_T_STORE_SP ;\
297 /* temporary store r3, r9 into r1, r10 */ ;\
298 l.addi r1,r3,0x0 ;\
299 l.addi r10,r9,0x0 ;\
300 LOAD_SYMBOL_2_GPR(r9,_string_unhandled_exception) ;\
301 tophys (r3,r9) ;\
302 l.jal _emergency_print ;\
303 l.nop ;\
304 l.mfspr r3,r0,SPR_NPC ;\
305 l.jal _emergency_print_nr ;\
306 l.andi r3,r3,0x1f00 ;\
307 LOAD_SYMBOL_2_GPR(r9,_string_epc_prefix) ;\
308 tophys (r3,r9) ;\
309 l.jal _emergency_print ;\
310 l.nop ;\
311 l.jal _emergency_print_nr ;\
312 l.mfspr r3,r0,SPR_EPCR_BASE ;\
313 LOAD_SYMBOL_2_GPR(r9,_string_nl) ;\
314 tophys (r3,r9) ;\
315 l.jal _emergency_print ;\
316 l.nop ;\
317 /* end of printing */ ;\
318 l.addi r3,r1,0x0 ;\
319 l.addi r9,r10,0x0 ;\
320 /* extract current, ksp from current_set */ ;\
321 LOAD_SYMBOL_2_GPR(r1,_unhandled_stack_top) ;\
322 LOAD_SYMBOL_2_GPR(r10,init_thread_union) ;\
323 /* create new stack frame, save only needed gprs */ ;\
324 /* r1: KSP, r10: current, r31: __pa(KSP) */ ;\
325 /* r12: temp, syscall indicator, r13 temp */ ;\
326 l.addi r1,r1,-(INT_FRAME_SIZE) ;\
327 /* r1 is KSP, r30 is __pa(KSP) */ ;\
328 tophys (r30,r1) ;\
329 l.sw PT_GPR12(r30),r12 ;\
330 l.mfspr r12,r0,SPR_EPCR_BASE ;\
331 l.sw PT_PC(r30),r12 ;\
332 l.mfspr r12,r0,SPR_ESR_BASE ;\
333 l.sw PT_SR(r30),r12 ;\
334 /* save r31 */ ;\
335 EXCEPTION_T_LOAD_GPR30(r12) ;\
336 l.sw PT_GPR30(r30),r12 ;\
337 /* save r10 as was prior to exception */ ;\
338 EXCEPTION_T_LOAD_GPR10(r12) ;\
339 l.sw PT_GPR10(r30),r12 ;\
340 /* save PT_SP as was prior to exception */ ;\
341 EXCEPTION_T_LOAD_SP(r12) ;\
342 l.sw PT_SP(r30),r12 ;\
343 l.sw PT_GPR13(r30),r13 ;\
344 /* --> */ ;\
345 /* save exception r4, set r4 = EA */ ;\
346 l.sw PT_GPR4(r30),r4 ;\
347 l.mfspr r4,r0,SPR_EEAR_BASE ;\
348 /* r12 == 1 if we come from syscall */ ;\
349 CLEAR_GPR(r12) ;\
350 /* ----- play a MMU trick ----- */ ;\
351 l.ori r30,r0,(EXCEPTION_SR) ;\
352 l.mtspr r0,r30,SPR_ESR_BASE ;\
353 /* r31: EA address of handler */ ;\
354 LOAD_SYMBOL_2_GPR(r30,handler) ;\
355 l.mtspr r0,r30,SPR_EPCR_BASE ;\
356 l.rfe
357
358/* =====================================================[ exceptions] === */
359
360/* ---[ 0x100: RESET exception ]----------------------------------------- */
361 .org 0x100
362 /* Jump to .init code at _start which lives in the .head section
363 * and will be discarded after boot.
364 */
365 LOAD_SYMBOL_2_GPR(r15, _start)
366 tophys (r13,r15) /* MMU disabled */
367 l.jr r13
368 l.nop
369
370/* ---[ 0x200: BUS exception ]------------------------------------------- */
371 .org 0x200
372_dispatch_bus_fault:
373 EXCEPTION_HANDLE(_bus_fault_handler)
374
375/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
376 .org 0x300
377_dispatch_do_dpage_fault:
378// totaly disable timer interrupt
379// l.mtspr r0,r0,SPR_TTMR
380// DEBUG_TLB_PROBE(0x300)
381// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x300)
382 EXCEPTION_HANDLE(_data_page_fault_handler)
383
384/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
385 .org 0x400
386_dispatch_do_ipage_fault:
387// totaly disable timer interrupt
388// l.mtspr r0,r0,SPR_TTMR
389// DEBUG_TLB_PROBE(0x400)
390// EXCEPTION_DEBUG_VALUE_ER_ENABLED(0x400)
391 EXCEPTION_HANDLE(_insn_page_fault_handler)
392
393/* ---[ 0x500: Timer exception ]----------------------------------------- */
394 .org 0x500
395 EXCEPTION_HANDLE(_timer_handler)
396
397/* ---[ 0x600: Alignment exception ]-------------------------------------- */
398 .org 0x600
399 EXCEPTION_HANDLE(_alignment_handler)
400
401/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
402 .org 0x700
403 EXCEPTION_HANDLE(_illegal_instruction_handler)
404
405/* ---[ 0x800: External interrupt exception ]---------------------------- */
406 .org 0x800
407 EXCEPTION_HANDLE(_external_irq_handler)
408
409/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
410 .org 0x900
411 l.j boot_dtlb_miss_handler
412 l.nop
413
414/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
415 .org 0xa00
416 l.j boot_itlb_miss_handler
417 l.nop
418
419/* ---[ 0xb00: Range exception ]----------------------------------------- */
420 .org 0xb00
421 UNHANDLED_EXCEPTION(_vector_0xb00)
422
423/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
424 .org 0xc00
425 EXCEPTION_HANDLE(_sys_call_handler)
426
427/* ---[ 0xd00: Floating point exception ]--------------------------------- */
428 .org 0xd00
429 EXCEPTION_HANDLE(_fpe_trap_handler)
430
431/* ---[ 0xe00: Trap exception ]------------------------------------------ */
432 .org 0xe00
433// UNHANDLED_EXCEPTION(_vector_0xe00)
434 EXCEPTION_HANDLE(_trap_handler)
435
436/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
437 .org 0xf00
438 UNHANDLED_EXCEPTION(_vector_0xf00)
439
440/* ---[ 0x1000: Reserved exception ]------------------------------------- */
441 .org 0x1000
442 UNHANDLED_EXCEPTION(_vector_0x1000)
443
444/* ---[ 0x1100: Reserved exception ]------------------------------------- */
445 .org 0x1100
446 UNHANDLED_EXCEPTION(_vector_0x1100)
447
448/* ---[ 0x1200: Reserved exception ]------------------------------------- */
449 .org 0x1200
450 UNHANDLED_EXCEPTION(_vector_0x1200)
451
452/* ---[ 0x1300: Reserved exception ]------------------------------------- */
453 .org 0x1300
454 UNHANDLED_EXCEPTION(_vector_0x1300)
455
456/* ---[ 0x1400: Reserved exception ]------------------------------------- */
457 .org 0x1400
458 UNHANDLED_EXCEPTION(_vector_0x1400)
459
460/* ---[ 0x1500: Reserved exception ]------------------------------------- */
461 .org 0x1500
462 UNHANDLED_EXCEPTION(_vector_0x1500)
463
464/* ---[ 0x1600: Reserved exception ]------------------------------------- */
465 .org 0x1600
466 UNHANDLED_EXCEPTION(_vector_0x1600)
467
468/* ---[ 0x1700: Reserved exception ]------------------------------------- */
469 .org 0x1700
470 UNHANDLED_EXCEPTION(_vector_0x1700)
471
472/* ---[ 0x1800: Reserved exception ]------------------------------------- */
473 .org 0x1800
474 UNHANDLED_EXCEPTION(_vector_0x1800)
475
476/* ---[ 0x1900: Reserved exception ]------------------------------------- */
477 .org 0x1900
478 UNHANDLED_EXCEPTION(_vector_0x1900)
479
480/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
481 .org 0x1a00
482 UNHANDLED_EXCEPTION(_vector_0x1a00)
483
484/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
485 .org 0x1b00
486 UNHANDLED_EXCEPTION(_vector_0x1b00)
487
488/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
489 .org 0x1c00
490 UNHANDLED_EXCEPTION(_vector_0x1c00)
491
492/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
493 .org 0x1d00
494 UNHANDLED_EXCEPTION(_vector_0x1d00)
495
496/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
497 .org 0x1e00
498 UNHANDLED_EXCEPTION(_vector_0x1e00)
499
500/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
501 .org 0x1f00
502 UNHANDLED_EXCEPTION(_vector_0x1f00)
503
504 .org 0x2000
505/* ===================================================[ kernel start ]=== */
506
507/* .text*/
508
509/* This early stuff belongs in HEAD, but some of the functions below definitely
510 * don't... */
511
512 __HEAD
513 .global _start
514_start:
515 /* Init r0 to zero as per spec */
516 CLEAR_GPR(r0)
517
518 /* save kernel parameters */
519 l.or r25,r0,r3 /* pointer to fdt */
520
521 /*
522 * ensure a deterministic start
523 */
524
525 l.ori r3,r0,0x1
526 l.mtspr r0,r3,SPR_SR
527
528 /*
529 * Start the TTCR as early as possible, so that the RNG can make use of
530 * measurements of boot time from the earliest opportunity. Especially
531 * important is that the TTCR does not return zero by the time we reach
532 * random_init().
533 */
534 l.movhi r3,hi(SPR_TTMR_CR)
535 l.mtspr r0,r3,SPR_TTMR
536
537 CLEAR_GPR(r1)
538 CLEAR_GPR(r2)
539 CLEAR_GPR(r3)
540 CLEAR_GPR(r4)
541 CLEAR_GPR(r5)
542 CLEAR_GPR(r6)
543 CLEAR_GPR(r7)
544 CLEAR_GPR(r8)
545 CLEAR_GPR(r9)
546 CLEAR_GPR(r10)
547 CLEAR_GPR(r11)
548 CLEAR_GPR(r12)
549 CLEAR_GPR(r13)
550 CLEAR_GPR(r14)
551 CLEAR_GPR(r15)
552 CLEAR_GPR(r16)
553 CLEAR_GPR(r17)
554 CLEAR_GPR(r18)
555 CLEAR_GPR(r19)
556 CLEAR_GPR(r20)
557 CLEAR_GPR(r21)
558 CLEAR_GPR(r22)
559 CLEAR_GPR(r23)
560 CLEAR_GPR(r24)
561 CLEAR_GPR(r26)
562 CLEAR_GPR(r27)
563 CLEAR_GPR(r28)
564 CLEAR_GPR(r29)
565 CLEAR_GPR(r30)
566 CLEAR_GPR(r31)
567
568#ifdef CONFIG_SMP
569 l.mfspr r26,r0,SPR_COREID
570 l.sfeq r26,r0
571 l.bnf secondary_wait
572 l.nop
573#endif
574 /*
575 * set up initial ksp and current
576 */
577 /* setup kernel stack */
578 LOAD_SYMBOL_2_GPR(r1,init_thread_union + THREAD_SIZE)
579 LOAD_SYMBOL_2_GPR(r10,init_thread_union) // setup current
580 tophys (r31,r10)
581 l.sw TI_KSP(r31), r1
582
583 l.ori r4,r0,0x0
584
585
586 /*
587 * .data contains initialized data,
588 * .bss contains uninitialized data - clear it up
589 */
590clear_bss:
591 LOAD_SYMBOL_2_GPR(r24, __bss_start)
592 LOAD_SYMBOL_2_GPR(r26, _end)
593 tophys(r28,r24)
594 tophys(r30,r26)
595 CLEAR_GPR(r24)
596 CLEAR_GPR(r26)
5971:
598 l.sw (0)(r28),r0
599 l.sfltu r28,r30
600 l.bf 1b
601 l.addi r28,r28,4
602
603enable_ic:
604 l.jal _ic_enable
605 l.nop
606
607enable_dc:
608 l.jal _dc_enable
609 l.nop
610
611flush_tlb:
612 l.jal _flush_tlb
613 l.nop
614
615/* The MMU needs to be enabled before or1k_early_setup is called */
616
617enable_mmu:
618 /*
619 * enable dmmu & immu
620 * SR[5] = 0, SR[6] = 0, 6th and 7th bit of SR set to 0
621 */
622 l.mfspr r30,r0,SPR_SR
623 l.movhi r28,hi(SPR_SR_DME | SPR_SR_IME)
624 l.ori r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
625 l.or r30,r30,r28
626 l.mtspr r0,r30,SPR_SR
627 l.nop
628 l.nop
629 l.nop
630 l.nop
631 l.nop
632 l.nop
633 l.nop
634 l.nop
635 l.nop
636 l.nop
637 l.nop
638 l.nop
639 l.nop
640 l.nop
641 l.nop
642 l.nop
643
644 // reset the simulation counters
645 l.nop 5
646
647 /* check fdt header magic word */
648 l.lwz r3,0(r25) /* load magic from fdt into r3 */
649 l.movhi r4,hi(OF_DT_HEADER)
650 l.ori r4,r4,lo(OF_DT_HEADER)
651 l.sfeq r3,r4
652 l.bf _fdt_found
653 l.nop
654 /* magic number mismatch, set fdt pointer to null */
655 l.or r25,r0,r0
656_fdt_found:
657 /* pass fdt pointer to or1k_early_setup in r3 */
658 l.or r3,r0,r25
659 LOAD_SYMBOL_2_GPR(r24, or1k_early_setup)
660 l.jalr r24
661 l.nop
662
663clear_regs:
664 /*
665 * clear all GPRS to increase determinism
666 */
667 CLEAR_GPR(r2)
668 CLEAR_GPR(r3)
669 CLEAR_GPR(r4)
670 CLEAR_GPR(r5)
671 CLEAR_GPR(r6)
672 CLEAR_GPR(r7)
673 CLEAR_GPR(r8)
674 CLEAR_GPR(r9)
675 CLEAR_GPR(r11)
676 CLEAR_GPR(r12)
677 CLEAR_GPR(r13)
678 CLEAR_GPR(r14)
679 CLEAR_GPR(r15)
680 CLEAR_GPR(r16)
681 CLEAR_GPR(r17)
682 CLEAR_GPR(r18)
683 CLEAR_GPR(r19)
684 CLEAR_GPR(r20)
685 CLEAR_GPR(r21)
686 CLEAR_GPR(r22)
687 CLEAR_GPR(r23)
688 CLEAR_GPR(r24)
689 CLEAR_GPR(r25)
690 CLEAR_GPR(r26)
691 CLEAR_GPR(r27)
692 CLEAR_GPR(r28)
693 CLEAR_GPR(r29)
694 CLEAR_GPR(r30)
695 CLEAR_GPR(r31)
696
697jump_start_kernel:
698 /*
699 * jump to kernel entry (start_kernel)
700 */
701 LOAD_SYMBOL_2_GPR(r30, start_kernel)
702 l.jr r30
703 l.nop
704
705_flush_tlb:
706 /*
707 * I N V A L I D A T E T L B e n t r i e s
708 */
709 LOAD_SYMBOL_2_GPR(r5,SPR_DTLBMR_BASE(0))
710 LOAD_SYMBOL_2_GPR(r6,SPR_ITLBMR_BASE(0))
711 l.addi r7,r0,128 /* Maximum number of sets */
7121:
713 l.mtspr r5,r0,0x0
714 l.mtspr r6,r0,0x0
715
716 l.addi r5,r5,1
717 l.addi r6,r6,1
718 l.sfeq r7,r0
719 l.bnf 1b
720 l.addi r7,r7,-1
721
722 l.jr r9
723 l.nop
724
725#ifdef CONFIG_SMP
726secondary_wait:
727 /* Doze the cpu until we are asked to run */
728 /* If we dont have power management skip doze */
729 l.mfspr r25,r0,SPR_UPR
730 l.andi r25,r25,SPR_UPR_PMP
731 l.sfeq r25,r0
732 l.bf secondary_check_release
733 l.nop
734
735 /* Setup special secondary exception handler */
736 LOAD_SYMBOL_2_GPR(r3, _secondary_evbar)
737 tophys(r25,r3)
738 l.mtspr r0,r25,SPR_EVBAR
739
740 /* Enable Interrupts */
741 l.mfspr r25,r0,SPR_SR
742 l.ori r25,r25,SPR_SR_IEE
743 l.mtspr r0,r25,SPR_SR
744
745 /* Unmask interrupts interrupts */
746 l.mfspr r25,r0,SPR_PICMR
747 l.ori r25,r25,0xffff
748 l.mtspr r0,r25,SPR_PICMR
749
750 /* Doze */
751 l.mfspr r25,r0,SPR_PMR
752 LOAD_SYMBOL_2_GPR(r3, SPR_PMR_DME)
753 l.or r25,r25,r3
754 l.mtspr r0,r25,SPR_PMR
755
756 /* Wakeup - Restore exception handler */
757 l.mtspr r0,r0,SPR_EVBAR
758
759secondary_check_release:
760 /*
761 * Check if we actually got the release signal, if not go-back to
762 * sleep.
763 */
764 l.mfspr r25,r0,SPR_COREID
765 LOAD_SYMBOL_2_GPR(r3, secondary_release)
766 tophys(r4, r3)
767 l.lwz r3,0(r4)
768 l.sfeq r25,r3
769 l.bnf secondary_wait
770 l.nop
771 /* fall through to secondary_init */
772
773secondary_init:
774 /*
775 * set up initial ksp and current
776 */
777 LOAD_SYMBOL_2_GPR(r10, secondary_thread_info)
778 tophys (r30,r10)
779 l.lwz r10,0(r30)
780 l.addi r1,r10,THREAD_SIZE
781 tophys (r30,r10)
782 l.sw TI_KSP(r30),r1
783
784 l.jal _ic_enable
785 l.nop
786
787 l.jal _dc_enable
788 l.nop
789
790 l.jal _flush_tlb
791 l.nop
792
793 /*
794 * enable dmmu & immu
795 */
796 l.mfspr r30,r0,SPR_SR
797 l.movhi r28,hi(SPR_SR_DME | SPR_SR_IME)
798 l.ori r28,r28,lo(SPR_SR_DME | SPR_SR_IME)
799 l.or r30,r30,r28
800 /*
801 * This is a bit tricky, we need to switch over from physical addresses
802 * to virtual addresses on the fly.
803 * To do that, we first set up ESR with the IME and DME bits set.
804 * Then EPCR is set to secondary_start and then a l.rfe is issued to
805 * "jump" to that.
806 */
807 l.mtspr r0,r30,SPR_ESR_BASE
808 LOAD_SYMBOL_2_GPR(r30, secondary_start)
809 l.mtspr r0,r30,SPR_EPCR_BASE
810 l.rfe
811
812secondary_start:
813 LOAD_SYMBOL_2_GPR(r30, secondary_start_kernel)
814 l.jr r30
815 l.nop
816
817#endif
818
819/* ========================================[ cache ]=== */
820
821 /* alignment here so we don't change memory offsets with
822 * memory controller defined
823 */
824 .align 0x2000
825
826_ic_enable:
827 /* Check if IC present and skip enabling otherwise */
828 l.mfspr r24,r0,SPR_UPR
829 l.andi r26,r24,SPR_UPR_ICP
830 l.sfeq r26,r0
831 l.bf 9f
832 l.nop
833
834 /* Disable IC */
835 l.mfspr r6,r0,SPR_SR
836 l.addi r5,r0,-1
837 l.xori r5,r5,SPR_SR_ICE
838 l.and r5,r6,r5
839 l.mtspr r0,r5,SPR_SR
840
841 /* Establish cache block size
842 If BS=0, 16;
843 If BS=1, 32;
844 r14 contain block size
845 */
846 l.mfspr r24,r0,SPR_ICCFGR
847 l.andi r26,r24,SPR_ICCFGR_CBS
848 l.srli r28,r26,7
849 l.ori r30,r0,16
850 l.sll r14,r30,r28
851
852 /* Establish number of cache sets
853 r16 contains number of cache sets
854 r28 contains log(# of cache sets)
855 */
856 l.andi r26,r24,SPR_ICCFGR_NCS
857 l.srli r28,r26,3
858 l.ori r30,r0,1
859 l.sll r16,r30,r28
860
861 /* Invalidate IC */
862 l.addi r6,r0,0
863 l.sll r5,r14,r28
864// l.mul r5,r14,r16
865// l.trap 1
866// l.addi r5,r0,IC_SIZE
8671:
868 l.mtspr r0,r6,SPR_ICBIR
869 l.sfne r6,r5
870 l.bf 1b
871 l.add r6,r6,r14
872 // l.addi r6,r6,IC_LINE
873
874 /* Enable IC */
875 l.mfspr r6,r0,SPR_SR
876 l.ori r6,r6,SPR_SR_ICE
877 l.mtspr r0,r6,SPR_SR
878 l.nop
879 l.nop
880 l.nop
881 l.nop
882 l.nop
883 l.nop
884 l.nop
885 l.nop
886 l.nop
887 l.nop
8889:
889 l.jr r9
890 l.nop
891
892_dc_enable:
893 /* Check if DC present and skip enabling otherwise */
894 l.mfspr r24,r0,SPR_UPR
895 l.andi r26,r24,SPR_UPR_DCP
896 l.sfeq r26,r0
897 l.bf 9f
898 l.nop
899
900 /* Disable DC */
901 l.mfspr r6,r0,SPR_SR
902 l.addi r5,r0,-1
903 l.xori r5,r5,SPR_SR_DCE
904 l.and r5,r6,r5
905 l.mtspr r0,r5,SPR_SR
906
907 /* Establish cache block size
908 If BS=0, 16;
909 If BS=1, 32;
910 r14 contain block size
911 */
912 l.mfspr r24,r0,SPR_DCCFGR
913 l.andi r26,r24,SPR_DCCFGR_CBS
914 l.srli r28,r26,7
915 l.ori r30,r0,16
916 l.sll r14,r30,r28
917
918 /* Establish number of cache sets
919 r16 contains number of cache sets
920 r28 contains log(# of cache sets)
921 */
922 l.andi r26,r24,SPR_DCCFGR_NCS
923 l.srli r28,r26,3
924 l.ori r30,r0,1
925 l.sll r16,r30,r28
926
927 /* Invalidate DC */
928 l.addi r6,r0,0
929 l.sll r5,r14,r28
9301:
931 l.mtspr r0,r6,SPR_DCBIR
932 l.sfne r6,r5
933 l.bf 1b
934 l.add r6,r6,r14
935
936 /* Enable DC */
937 l.mfspr r6,r0,SPR_SR
938 l.ori r6,r6,SPR_SR_DCE
939 l.mtspr r0,r6,SPR_SR
9409:
941 l.jr r9
942 l.nop
943
944/* ===============================================[ page table masks ]=== */
945
946#define DTLB_UP_CONVERT_MASK 0x3fa
947#define ITLB_UP_CONVERT_MASK 0x3a
948
949/* for SMP we'd have (this is a bit subtle, CC must be always set
950 * for SMP, but since we have _PAGE_PRESENT bit always defined
951 * we can just modify the mask)
952 */
953#define DTLB_SMP_CONVERT_MASK 0x3fb
954#define ITLB_SMP_CONVERT_MASK 0x3b
955
956/* ---[ boot dtlb miss handler ]----------------------------------------- */
957
958boot_dtlb_miss_handler:
959
960/* mask for DTLB_MR register: - (0) sets V (valid) bit,
961 * - (31-12) sets bits belonging to VPN (31-12)
962 */
963#define DTLB_MR_MASK 0xfffff001
964
965/* mask for DTLB_TR register: - (2) sets CI (cache inhibit) bit,
966 * - (4) sets A (access) bit,
967 * - (5) sets D (dirty) bit,
968 * - (8) sets SRE (superuser read) bit
969 * - (9) sets SWE (superuser write) bit
970 * - (31-12) sets bits belonging to VPN (31-12)
971 */
972#define DTLB_TR_MASK 0xfffff332
973
974/* These are for masking out the VPN/PPN value from the MR/TR registers...
975 * it's not the same as the PFN */
976#define VPN_MASK 0xfffff000
977#define PPN_MASK 0xfffff000
978
979
980 EXCEPTION_STORE_GPR6
981
982#if 0
983 l.mfspr r6,r0,SPR_ESR_BASE //
984 l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
985 l.sfeqi r6,0 // r6 == 0x1 --> SM
986 l.bf exit_with_no_dtranslation //
987 l.nop
988#endif
989
990 /* this could be optimized by moving storing of
991 * non r6 registers here, and jumping r6 restore
992 * if not in supervisor mode
993 */
994
995 EXCEPTION_STORE_GPR2
996 EXCEPTION_STORE_GPR3
997 EXCEPTION_STORE_GPR4
998 EXCEPTION_STORE_GPR5
999
1000 l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
1001
1002immediate_translation:
1003 CLEAR_GPR(r6)
1004
1005 l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
1006
1007 l.mfspr r6, r0, SPR_DMMUCFGR
1008 l.andi r6, r6, SPR_DMMUCFGR_NTS
1009 l.srli r6, r6, SPR_DMMUCFGR_NTS_OFF
1010 l.ori r5, r0, 0x1
1011 l.sll r5, r5, r6 // r5 = number DMMU sets
1012 l.addi r6, r5, -1 // r6 = nsets mask
1013 l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
1014
1015 l.or r6,r6,r4 // r6 <- r4
1016 l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
1017 l.movhi r5,hi(DTLB_MR_MASK) // r5 <- ffff:0000.x000
1018 l.ori r5,r5,lo(DTLB_MR_MASK) // r5 <- ffff:1111.x001 - apply DTLB_MR_MASK
1019 l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have DTLBMR entry
1020 l.mtspr r2,r5,SPR_DTLBMR_BASE(0) // set DTLBMR
1021
1022 /* set up DTLB with no translation for EA <= 0xbfffffff */
1023 LOAD_SYMBOL_2_GPR(r6,0xbfffffff)
1024 l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xbfffffff >= EA)
1025 l.bf 1f // goto out
1026 l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
1027
1028 tophys(r3,r4) // r3 <- PA
10291:
1030 l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
1031 l.movhi r5,hi(DTLB_TR_MASK) // r5 <- ffff:0000.x000
1032 l.ori r5,r5,lo(DTLB_TR_MASK) // r5 <- ffff:1111.x330 - apply DTLB_MR_MASK
1033 l.and r5,r5,r3 // r5 <- PPN :PPN .x330 - we have DTLBTR entry
1034 l.mtspr r2,r5,SPR_DTLBTR_BASE(0) // set DTLBTR
1035
1036 EXCEPTION_LOAD_GPR6
1037 EXCEPTION_LOAD_GPR5
1038 EXCEPTION_LOAD_GPR4
1039 EXCEPTION_LOAD_GPR3
1040 EXCEPTION_LOAD_GPR2
1041
1042 l.rfe // SR <- ESR, PC <- EPC
1043
1044exit_with_no_dtranslation:
1045 /* EA out of memory or not in supervisor mode */
1046 EXCEPTION_LOAD_GPR6
1047 EXCEPTION_LOAD_GPR4
1048 l.j _dispatch_bus_fault
1049
1050/* ---[ boot itlb miss handler ]----------------------------------------- */
1051
1052boot_itlb_miss_handler:
1053
1054/* mask for ITLB_MR register: - sets V (valid) bit,
1055 * - sets bits belonging to VPN (15-12)
1056 */
1057#define ITLB_MR_MASK 0xfffff001
1058
1059/* mask for ITLB_TR register: - sets A (access) bit,
1060 * - sets SXE (superuser execute) bit
1061 * - sets bits belonging to VPN (15-12)
1062 */
1063#define ITLB_TR_MASK 0xfffff050
1064
1065/*
1066#define VPN_MASK 0xffffe000
1067#define PPN_MASK 0xffffe000
1068*/
1069
1070
1071
1072 EXCEPTION_STORE_GPR2
1073 EXCEPTION_STORE_GPR3
1074 EXCEPTION_STORE_GPR4
1075 EXCEPTION_STORE_GPR5
1076 EXCEPTION_STORE_GPR6
1077
1078#if 0
1079 l.mfspr r6,r0,SPR_ESR_BASE //
1080 l.andi r6,r6,SPR_SR_SM // are we in kernel mode ?
1081 l.sfeqi r6,0 // r6 == 0x1 --> SM
1082 l.bf exit_with_no_itranslation
1083 l.nop
1084#endif
1085
1086
1087 l.mfspr r4,r0,SPR_EEAR_BASE // get the offending EA
1088
1089earlyearly:
1090 CLEAR_GPR(r6)
1091
1092 l.srli r3,r4,0xd // r3 <- r4 / 8192 (sets are relative to page size (8Kb) NOT VPN size (4Kb)
1093
1094 l.mfspr r6, r0, SPR_IMMUCFGR
1095 l.andi r6, r6, SPR_IMMUCFGR_NTS
1096 l.srli r6, r6, SPR_IMMUCFGR_NTS_OFF
1097 l.ori r5, r0, 0x1
1098 l.sll r5, r5, r6 // r5 = number IMMU sets from IMMUCFGR
1099 l.addi r6, r5, -1 // r6 = nsets mask
1100 l.and r2, r3, r6 // r2 <- r3 % NSETS_MASK
1101
1102 l.or r6,r6,r4 // r6 <- r4
1103 l.ori r6,r6,~(VPN_MASK) // r6 <- VPN :VPN .xfff - clear up lo(r6) to 0x**** *fff
1104 l.movhi r5,hi(ITLB_MR_MASK) // r5 <- ffff:0000.x000
1105 l.ori r5,r5,lo(ITLB_MR_MASK) // r5 <- ffff:1111.x001 - apply ITLB_MR_MASK
1106 l.and r5,r5,r6 // r5 <- VPN :VPN .x001 - we have ITLBMR entry
1107 l.mtspr r2,r5,SPR_ITLBMR_BASE(0) // set ITLBMR
1108
1109 /*
1110 * set up ITLB with no translation for EA <= 0x0fffffff
1111 *
1112 * we need this for head.S mapping (EA = PA). if we move all functions
1113 * which run with mmu enabled into entry.S, we might be able to eliminate this.
1114 *
1115 */
1116 LOAD_SYMBOL_2_GPR(r6,0x0fffffff)
1117 l.sfgeu r6,r4 // flag if r6 >= r4 (if 0xb0ffffff >= EA)
1118 l.bf 1f // goto out
1119 l.and r3,r4,r4 // delay slot :: 24 <- r4 (if flag==1)
1120
1121 tophys(r3,r4) // r3 <- PA
11221:
1123 l.ori r3,r3,~(PPN_MASK) // r3 <- PPN :PPN .xfff - clear up lo(r6) to 0x**** *fff
1124 l.movhi r5,hi(ITLB_TR_MASK) // r5 <- ffff:0000.x000
1125 l.ori r5,r5,lo(ITLB_TR_MASK) // r5 <- ffff:1111.x050 - apply ITLB_MR_MASK
1126 l.and r5,r5,r3 // r5 <- PPN :PPN .x050 - we have ITLBTR entry
1127 l.mtspr r2,r5,SPR_ITLBTR_BASE(0) // set ITLBTR
1128
1129 EXCEPTION_LOAD_GPR6
1130 EXCEPTION_LOAD_GPR5
1131 EXCEPTION_LOAD_GPR4
1132 EXCEPTION_LOAD_GPR3
1133 EXCEPTION_LOAD_GPR2
1134
1135 l.rfe // SR <- ESR, PC <- EPC
1136
1137exit_with_no_itranslation:
1138 EXCEPTION_LOAD_GPR4
1139 EXCEPTION_LOAD_GPR6
1140 l.j _dispatch_bus_fault
1141 l.nop
1142
1143/* ====================================================================== */
1144/*
1145 * Stuff below here shouldn't go into .head section... maybe this stuff
1146 * can be moved to entry.S ???
1147 */
1148
1149/* ==============================================[ DTLB miss handler ]=== */
1150
1151/*
1152 * Comments:
1153 * Exception handlers are entered with MMU off so the following handler
1154 * needs to use physical addressing
1155 *
1156 */
1157
1158 .text
1159ENTRY(dtlb_miss_handler)
1160 EXCEPTION_STORE_GPR2
1161 EXCEPTION_STORE_GPR3
1162 EXCEPTION_STORE_GPR4
1163 /*
1164 * get EA of the miss
1165 */
1166 l.mfspr r2,r0,SPR_EEAR_BASE
1167 /*
1168 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
1169 */
1170 GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r4 is temp
1171 l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
1172 l.slli r4,r4,0x2 // to get address << 2
1173 l.add r3,r4,r3 // r4 is pgd_index(daddr)
1174 /*
1175 * if (pmd_none(*pmd))
1176 * goto pmd_none:
1177 */
1178 tophys (r4,r3)
1179 l.lwz r3,0x0(r4) // get *pmd value
1180 l.sfne r3,r0
1181 l.bnf d_pmd_none
1182 l.addi r3,r0,0xffffe000 // PAGE_MASK
1183
1184d_pmd_good:
1185 /*
1186 * pte = *pte_offset(pmd, daddr);
1187 */
1188 l.lwz r4,0x0(r4) // get **pmd value
1189 l.and r4,r4,r3 // & PAGE_MASK
1190 l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
1191 l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
1192 l.slli r3,r3,0x2 // to get address << 2
1193 l.add r3,r3,r4
1194 l.lwz r3,0x0(r3) // this is pte at last
1195 /*
1196 * if (!pte_present(pte))
1197 */
1198 l.andi r4,r3,0x1
1199 l.sfne r4,r0 // is pte present
1200 l.bnf d_pte_not_present
1201 l.addi r4,r0,0xffffe3fa // PAGE_MASK | DTLB_UP_CONVERT_MASK
1202 /*
1203 * fill DTLB TR register
1204 */
1205 l.and r4,r3,r4 // apply the mask
1206 // Determine number of DMMU sets
1207 l.mfspr r2, r0, SPR_DMMUCFGR
1208 l.andi r2, r2, SPR_DMMUCFGR_NTS
1209 l.srli r2, r2, SPR_DMMUCFGR_NTS_OFF
1210 l.ori r3, r0, 0x1
1211 l.sll r3, r3, r2 // r3 = number DMMU sets DMMUCFGR
1212 l.addi r2, r3, -1 // r2 = nsets mask
1213 l.mfspr r3, r0, SPR_EEAR_BASE
1214 l.srli r3, r3, 0xd // >> PAGE_SHIFT
1215 l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
1216 //NUM_TLB_ENTRIES
1217 l.mtspr r2,r4,SPR_DTLBTR_BASE(0)
1218 /*
1219 * fill DTLB MR register
1220 */
1221 l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
1222 l.ori r4,r3,0x1 // set hardware valid bit: DTBL_MR entry
1223 l.mtspr r2,r4,SPR_DTLBMR_BASE(0)
1224
1225 EXCEPTION_LOAD_GPR2
1226 EXCEPTION_LOAD_GPR3
1227 EXCEPTION_LOAD_GPR4
1228 l.rfe
1229d_pmd_none:
1230d_pte_not_present:
1231 EXCEPTION_LOAD_GPR2
1232 EXCEPTION_LOAD_GPR3
1233 EXCEPTION_LOAD_GPR4
1234 EXCEPTION_HANDLE(_dtlb_miss_page_fault_handler)
1235
1236/* ==============================================[ ITLB miss handler ]=== */
1237ENTRY(itlb_miss_handler)
1238 EXCEPTION_STORE_GPR2
1239 EXCEPTION_STORE_GPR3
1240 EXCEPTION_STORE_GPR4
1241 /*
1242 * get EA of the miss
1243 */
1244 l.mfspr r2,r0,SPR_EEAR_BASE
1245
1246 /*
1247 * pmd = (pmd_t *)(current_pgd + pgd_index(daddr));
1248 *
1249 */
1250 GET_CURRENT_PGD(r3,r4) // r3 is current_pgd, r5 is temp
1251 l.srli r4,r2,0x18 // >> PAGE_SHIFT + (PAGE_SHIFT - 2)
1252 l.slli r4,r4,0x2 // to get address << 2
1253 l.add r3,r4,r3 // r4 is pgd_index(daddr)
1254 /*
1255 * if (pmd_none(*pmd))
1256 * goto pmd_none:
1257 */
1258 tophys (r4,r3)
1259 l.lwz r3,0x0(r4) // get *pmd value
1260 l.sfne r3,r0
1261 l.bnf i_pmd_none
1262 l.addi r3,r0,0xffffe000 // PAGE_MASK
1263
1264i_pmd_good:
1265 /*
1266 * pte = *pte_offset(pmd, iaddr);
1267 *
1268 */
1269 l.lwz r4,0x0(r4) // get **pmd value
1270 l.and r4,r4,r3 // & PAGE_MASK
1271 l.srli r2,r2,0xd // >> PAGE_SHIFT, r2 == EEAR
1272 l.andi r3,r2,0x7ff // (1UL << PAGE_SHIFT - 2) - 1
1273 l.slli r3,r3,0x2 // to get address << 2
1274 l.add r3,r3,r4
1275 l.lwz r3,0x0(r3) // this is pte at last
1276 /*
1277 * if (!pte_present(pte))
1278 *
1279 */
1280 l.andi r4,r3,0x1
1281 l.sfne r4,r0 // is pte present
1282 l.bnf i_pte_not_present
1283 l.addi r4,r0,0xffffe03a // PAGE_MASK | ITLB_UP_CONVERT_MASK
1284 /*
1285 * fill ITLB TR register
1286 */
1287 l.and r4,r3,r4 // apply the mask
1288 l.andi r3,r3,0x7c0 // _PAGE_EXEC | _PAGE_SRE | _PAGE_SWE | _PAGE_URE | _PAGE_UWE
1289 l.sfeq r3,r0
1290 l.bf itlb_tr_fill //_workaround
1291 // Determine number of IMMU sets
1292 l.mfspr r2, r0, SPR_IMMUCFGR
1293 l.andi r2, r2, SPR_IMMUCFGR_NTS
1294 l.srli r2, r2, SPR_IMMUCFGR_NTS_OFF
1295 l.ori r3, r0, 0x1
1296 l.sll r3, r3, r2 // r3 = number IMMU sets IMMUCFGR
1297 l.addi r2, r3, -1 // r2 = nsets mask
1298 l.mfspr r3, r0, SPR_EEAR_BASE
1299 l.srli r3, r3, 0xd // >> PAGE_SHIFT
1300 l.and r2, r3, r2 // calc offset: & (NUM_TLB_ENTRIES-1)
1301
1302/*
1303 * __PHX__ :: fixme
1304 * we should not just blindly set executable flags,
1305 * but it does help with ping. the clean way would be to find out
1306 * (and fix it) why stack doesn't have execution permissions
1307 */
1308
1309itlb_tr_fill_workaround:
1310 l.ori r4,r4,0xc0 // | (SPR_ITLBTR_UXE | ITLBTR_SXE)
1311itlb_tr_fill:
1312 l.mtspr r2,r4,SPR_ITLBTR_BASE(0)
1313 /*
1314 * fill DTLB MR register
1315 */
1316 l.slli r3, r3, 0xd /* << PAGE_SHIFT => EA & PAGE_MASK */
1317 l.ori r4,r3,0x1 // set hardware valid bit: ITBL_MR entry
1318 l.mtspr r2,r4,SPR_ITLBMR_BASE(0)
1319
1320 EXCEPTION_LOAD_GPR2
1321 EXCEPTION_LOAD_GPR3
1322 EXCEPTION_LOAD_GPR4
1323 l.rfe
1324
1325i_pmd_none:
1326i_pte_not_present:
1327 EXCEPTION_LOAD_GPR2
1328 EXCEPTION_LOAD_GPR3
1329 EXCEPTION_LOAD_GPR4
1330 EXCEPTION_HANDLE(_itlb_miss_page_fault_handler)
1331
1332/* ==============================================[ boot tlb handlers ]=== */
1333
1334
1335/* =================================================[ debugging aids ]=== */
1336
1337/*
1338 * DESC: Prints ASCII character stored in r7
1339 *
1340 * PRMS: r7 - a 32-bit value with an ASCII character in the first byte
1341 * position.
1342 *
1343 * PREQ: The UART at UART_BASE_ADD has to be initialized
1344 *
1345 * POST: internally used but restores:
1346 * r4 - to store UART_BASE_ADD
1347 * r5 - for loading OFF_TXFULL / THRE,TEMT
1348 * r6 - for storing bitmask (SERIAL_8250)
1349 */
1350ENTRY(_emergency_putc)
1351 EMERGENCY_PRINT_STORE_GPR4
1352 EMERGENCY_PRINT_STORE_GPR5
1353 EMERGENCY_PRINT_STORE_GPR6
1354
1355 l.movhi r4,hi(UART_BASE_ADD)
1356 l.ori r4,r4,lo(UART_BASE_ADD)
1357
1358#if defined(CONFIG_SERIAL_LITEUART)
1359 /* Check OFF_TXFULL status */
13601: l.lwz r5,4(r4)
1361 l.andi r5,r5,0xff
1362 l.sfnei r5,0
1363 l.bf 1b
1364 l.nop
1365
1366 /* Write character */
1367 l.andi r7,r7,0xff
1368 l.sw 0(r4),r7
1369#elif defined(CONFIG_SERIAL_8250)
1370 /* Check UART LSR THRE (hold) bit */
1371 l.addi r6,r0,0x20
13721: l.lbz r5,5(r4)
1373 l.andi r5,r5,0x20
1374 l.sfeq r5,r6
1375 l.bnf 1b
1376 l.nop
1377
1378 /* Write character */
1379 l.sb 0(r4),r7
1380
1381 /* Check UART LSR THRE|TEMT (hold, empty) bits */
1382 l.addi r6,r0,0x60
13831: l.lbz r5,5(r4)
1384 l.andi r5,r5,0x60
1385 l.sfeq r5,r6
1386 l.bnf 1b
1387 l.nop
1388#endif
1389 EMERGENCY_PRINT_LOAD_GPR6
1390 EMERGENCY_PRINT_LOAD_GPR5
1391 EMERGENCY_PRINT_LOAD_GPR4
1392 l.jr r9
1393 l.nop
1394
1395/*
1396 * DSCR: prints a string referenced by r3.
1397 *
1398 * PRMS: r3 - address of the first character of null
1399 * terminated string to be printed
1400 *
1401 * PREQ: UART at UART_BASE_ADD has to be initialized
1402 *
1403 * POST: caller should be aware that r3, r9 are changed
1404 */
1405ENTRY(_emergency_print)
1406 EMERGENCY_PRINT_STORE_GPR7
1407 EMERGENCY_PRINT_STORE_GPR9
1408
1409 /* Load character to r7, check for null terminator */
14102: l.lbz r7,0(r3)
1411 l.sfeqi r7,0x0
1412 l.bf 9f
1413 l.nop
1414
1415 l.jal _emergency_putc
1416 l.nop
1417
1418 /* next character */
1419 l.j 2b
1420 l.addi r3,r3,0x1
1421
14229:
1423 EMERGENCY_PRINT_LOAD_GPR9
1424 EMERGENCY_PRINT_LOAD_GPR7
1425 l.jr r9
1426 l.nop
1427
1428/*
1429 * DSCR: prints a number in r3 in hex.
1430 *
1431 * PRMS: r3 - a 32-bit unsigned integer
1432 *
1433 * PREQ: UART at UART_BASE_ADD has to be initialized
1434 *
1435 * POST: caller should be aware that r3, r9 are changed
1436 */
1437ENTRY(_emergency_print_nr)
1438 EMERGENCY_PRINT_STORE_GPR7
1439 EMERGENCY_PRINT_STORE_GPR8
1440 EMERGENCY_PRINT_STORE_GPR9
1441
1442 l.addi r8,r0,32 // shift register
1443
14441: /* remove leading zeros */
1445 l.addi r8,r8,-0x4
1446 l.srl r7,r3,r8
1447 l.andi r7,r7,0xf
1448
1449 /* don't skip the last zero if number == 0x0 */
1450 l.sfeqi r8,0x4
1451 l.bf 2f
1452 l.nop
1453
1454 l.sfeq r7,r0
1455 l.bf 1b
1456 l.nop
1457
14582:
1459 l.srl r7,r3,r8
1460
1461 l.andi r7,r7,0xf
1462 l.sflts r8,r0
1463 l.bf 9f
1464
1465 /* Numbers greater than 9 translate to a-f */
1466 l.sfgtui r7,0x9
1467 l.bnf 8f
1468 l.nop
1469 l.addi r7,r7,0x27
1470
1471 /* Convert to ascii and output character */
14728: l.jal _emergency_putc
1473 l.addi r7,r7,0x30
1474
1475 /* next character */
1476 l.j 2b
1477 l.addi r8,r8,-0x4
1478
14799:
1480 EMERGENCY_PRINT_LOAD_GPR9
1481 EMERGENCY_PRINT_LOAD_GPR8
1482 EMERGENCY_PRINT_LOAD_GPR7
1483 l.jr r9
1484 l.nop
1485
1486/*
1487 * This should be used for debugging only.
1488 * It messes up the Linux early serial output
1489 * somehow, so use it sparingly and essentially
1490 * only if you need to debug something that goes wrong
1491 * before Linux gets the early serial going.
1492 *
1493 * Furthermore, you'll have to make sure you set the
1494 * UART_DEVISOR correctly according to the system
1495 * clock rate.
1496 *
1497 *
1498 */
1499
1500
1501
1502#define SYS_CLK 20000000
1503//#define SYS_CLK 1843200
1504#define OR32_CONSOLE_BAUD 115200
1505#define UART_DIVISOR SYS_CLK/(16*OR32_CONSOLE_BAUD)
1506
1507ENTRY(_early_uart_init)
1508 l.movhi r3,hi(UART_BASE_ADD)
1509 l.ori r3,r3,lo(UART_BASE_ADD)
1510
1511#if defined(CONFIG_SERIAL_8250)
1512 l.addi r4,r0,0x7
1513 l.sb 0x2(r3),r4
1514
1515 l.addi r4,r0,0x0
1516 l.sb 0x1(r3),r4
1517
1518 l.addi r4,r0,0x3
1519 l.sb 0x3(r3),r4
1520
1521 l.lbz r5,3(r3)
1522 l.ori r4,r5,0x80
1523 l.sb 0x3(r3),r4
1524 l.addi r4,r0,((UART_DIVISOR>>8) & 0x000000ff)
1525 l.sb UART_DLM(r3),r4
1526 l.addi r4,r0,((UART_DIVISOR) & 0x000000ff)
1527 l.sb UART_DLL(r3),r4
1528 l.sb 0x3(r3),r5
1529#endif
1530
1531 l.jr r9
1532 l.nop
1533
1534 .align 0x1000
1535 .global _secondary_evbar
1536_secondary_evbar:
1537
1538 .space 0x800
1539 /* Just disable interrupts and Return */
1540 l.ori r3,r0,SPR_SR_SM
1541 l.mtspr r0,r3,SPR_ESR_BASE
1542 l.rfe
1543
1544
1545 .section .rodata
1546_string_unhandled_exception:
1547 .string "\r\nRunarunaround: Unhandled exception 0x\0"
1548
1549_string_epc_prefix:
1550 .string ": EPC=0x\0"
1551
1552_string_nl:
1553 .string "\r\n\0"
1554
1555
1556/* ========================================[ page aligned structures ]=== */
1557
1558/*
1559 * .data section should be page aligned
1560 * (look into arch/openrisc/kernel/vmlinux.lds.S)
1561 */
1562 .section .data,"aw"
1563 .align 8192
1564 .global empty_zero_page
1565empty_zero_page:
1566 .space 8192
1567
1568 .global swapper_pg_dir
1569swapper_pg_dir:
1570 .space 8192
1571
1572 .global _unhandled_stack
1573_unhandled_stack:
1574 .space 8192
1575_unhandled_stack_top:
1576
1577/* ============================================================[ EOF ]=== */
1578

source code of linux/arch/openrisc/kernel/head.S