1/*
2 * Copyright 2018 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26#include <linux/delay.h>
27
28#include "resource.h"
29#include "dce_i2c.h"
30#include "dce_i2c_hw.h"
31#include "reg_helper.h"
32#include "include/gpio_service_interface.h"
33
34#define CTX \
35 dce_i2c_hw->ctx
36#define REG(reg)\
37 dce_i2c_hw->regs->reg
38
39#undef FN
40#define FN(reg_name, field_name) \
41 dce_i2c_hw->shifts->field_name, dce_i2c_hw->masks->field_name
42
43static void execute_transaction(
44 struct dce_i2c_hw *dce_i2c_hw)
45{
46 REG_UPDATE_N(SETUP, 5,
47 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_DATA_DRIVE_EN), 0,
48 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_CLK_DRIVE_EN), 0,
49 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_DATA_DRIVE_SEL), 0,
50 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_INTRA_TRANSACTION_DELAY), 0,
51 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_INTRA_BYTE_DELAY), 0);
52
53
54 REG_UPDATE_5(DC_I2C_CONTROL,
55 DC_I2C_SOFT_RESET, 0,
56 DC_I2C_SW_STATUS_RESET, 0,
57 DC_I2C_SEND_RESET, 0,
58 DC_I2C_GO, 0,
59 DC_I2C_TRANSACTION_COUNT, dce_i2c_hw->transaction_count - 1);
60
61 /* start I2C transfer */
62 REG_UPDATE(DC_I2C_CONTROL, DC_I2C_GO, 1);
63
64 /* all transactions were executed and HW buffer became empty
65 * (even though it actually happens when status becomes DONE)
66 */
67 dce_i2c_hw->transaction_count = 0;
68 dce_i2c_hw->buffer_used_bytes = 0;
69}
70
71static enum i2c_channel_operation_result get_channel_status(
72 struct dce_i2c_hw *dce_i2c_hw,
73 uint8_t *returned_bytes)
74{
75 uint32_t i2c_sw_status = 0;
76 uint32_t value =
77 REG_GET(DC_I2C_SW_STATUS, DC_I2C_SW_STATUS, &i2c_sw_status);
78 if (i2c_sw_status == DC_I2C_STATUS__DC_I2C_STATUS_USED_BY_SW)
79 return I2C_CHANNEL_OPERATION_ENGINE_BUSY;
80 else if (value & dce_i2c_hw->masks->DC_I2C_SW_STOPPED_ON_NACK)
81 return I2C_CHANNEL_OPERATION_NO_RESPONSE;
82 else if (value & dce_i2c_hw->masks->DC_I2C_SW_TIMEOUT)
83 return I2C_CHANNEL_OPERATION_TIMEOUT;
84 else if (value & dce_i2c_hw->masks->DC_I2C_SW_ABORTED)
85 return I2C_CHANNEL_OPERATION_FAILED;
86 else if (value & dce_i2c_hw->masks->DC_I2C_SW_DONE)
87 return I2C_CHANNEL_OPERATION_SUCCEEDED;
88
89 /*
90 * this is the case when HW used for communication, I2C_SW_STATUS
91 * could be zero
92 */
93 return I2C_CHANNEL_OPERATION_SUCCEEDED;
94}
95
96static uint32_t get_hw_buffer_available_size(
97 const struct dce_i2c_hw *dce_i2c_hw)
98{
99 return dce_i2c_hw->buffer_size -
100 dce_i2c_hw->buffer_used_bytes;
101}
102
103static void process_channel_reply(
104 struct dce_i2c_hw *dce_i2c_hw,
105 struct i2c_payload *reply)
106{
107 uint32_t length = reply->length;
108 uint8_t *buffer = reply->data;
109
110 REG_SET_3(DC_I2C_DATA, 0,
111 DC_I2C_INDEX, dce_i2c_hw->buffer_used_write,
112 DC_I2C_DATA_RW, 1,
113 DC_I2C_INDEX_WRITE, 1);
114
115 while (length) {
116 /* after reading the status,
117 * if the I2C operation executed successfully
118 * (i.e. DC_I2C_STATUS_DONE = 1) then the I2C controller
119 * should read data bytes from I2C circular data buffer
120 */
121
122 uint32_t i2c_data;
123
124 REG_GET(DC_I2C_DATA, DC_I2C_DATA, &i2c_data);
125 *buffer++ = i2c_data;
126
127 --length;
128 }
129}
130
131static bool is_engine_available(struct dce_i2c_hw *dce_i2c_hw)
132{
133 unsigned int arbitrate;
134 unsigned int i2c_hw_status;
135
136 REG_GET(HW_STATUS, DC_I2C_DDC1_HW_STATUS, &i2c_hw_status);
137 if (i2c_hw_status == DC_I2C_STATUS__DC_I2C_STATUS_USED_BY_HW)
138 return false;
139
140 REG_GET(DC_I2C_ARBITRATION, DC_I2C_REG_RW_CNTL_STATUS, &arbitrate);
141 if (arbitrate == DC_I2C_REG_RW_CNTL_STATUS_DMCU_ONLY)
142 return false;
143
144 return true;
145}
146
147static bool is_hw_busy(struct dce_i2c_hw *dce_i2c_hw)
148{
149 uint32_t i2c_sw_status = 0;
150
151 REG_GET(DC_I2C_SW_STATUS, DC_I2C_SW_STATUS, &i2c_sw_status);
152 if (i2c_sw_status == DC_I2C_STATUS__DC_I2C_STATUS_IDLE)
153 return false;
154
155 if (is_engine_available(dce_i2c_hw))
156 return false;
157
158 return true;
159}
160
161static bool process_transaction(
162 struct dce_i2c_hw *dce_i2c_hw,
163 struct i2c_request_transaction_data *request)
164{
165 uint32_t length = request->length;
166 uint8_t *buffer = request->data;
167
168 bool last_transaction = false;
169 uint32_t value = 0;
170
171 if (is_hw_busy(dce_i2c_hw)) {
172 request->status = I2C_CHANNEL_OPERATION_ENGINE_BUSY;
173 return false;
174 }
175
176 last_transaction = ((dce_i2c_hw->transaction_count == 3) ||
177 (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) ||
178 (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ));
179
180
181 switch (dce_i2c_hw->transaction_count) {
182 case 0:
183 REG_UPDATE_5(DC_I2C_TRANSACTION0,
184 DC_I2C_STOP_ON_NACK0, 1,
185 DC_I2C_START0, 1,
186 DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
187 DC_I2C_COUNT0, length,
188 DC_I2C_STOP0, last_transaction ? 1 : 0);
189 break;
190 case 1:
191 REG_UPDATE_5(DC_I2C_TRANSACTION1,
192 DC_I2C_STOP_ON_NACK0, 1,
193 DC_I2C_START0, 1,
194 DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
195 DC_I2C_COUNT0, length,
196 DC_I2C_STOP0, last_transaction ? 1 : 0);
197 break;
198 case 2:
199 REG_UPDATE_5(DC_I2C_TRANSACTION2,
200 DC_I2C_STOP_ON_NACK0, 1,
201 DC_I2C_START0, 1,
202 DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
203 DC_I2C_COUNT0, length,
204 DC_I2C_STOP0, last_transaction ? 1 : 0);
205 break;
206 case 3:
207 REG_UPDATE_5(DC_I2C_TRANSACTION3,
208 DC_I2C_STOP_ON_NACK0, 1,
209 DC_I2C_START0, 1,
210 DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ),
211 DC_I2C_COUNT0, length,
212 DC_I2C_STOP0, last_transaction ? 1 : 0);
213 break;
214 default:
215 /* TODO Warning ? */
216 break;
217 }
218
219 /* Write the I2C address and I2C data
220 * into the hardware circular buffer, one byte per entry.
221 * As an example, the 7-bit I2C slave address for CRT monitor
222 * for reading DDC/EDID information is 0b1010001.
223 * For an I2C send operation, the LSB must be programmed to 0;
224 * for I2C receive operation, the LSB must be programmed to 1.
225 */
226 if (dce_i2c_hw->transaction_count == 0) {
227 value = REG_SET_4(DC_I2C_DATA, 0,
228 DC_I2C_DATA_RW, false,
229 DC_I2C_DATA, request->address,
230 DC_I2C_INDEX, 0,
231 DC_I2C_INDEX_WRITE, 1);
232 dce_i2c_hw->buffer_used_write = 0;
233 } else
234 value = REG_SET_2(DC_I2C_DATA, 0,
235 DC_I2C_DATA_RW, false,
236 DC_I2C_DATA, request->address);
237
238 dce_i2c_hw->buffer_used_write++;
239
240 if (!(request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)) {
241 while (length) {
242 REG_SET_2(DC_I2C_DATA, value,
243 DC_I2C_INDEX_WRITE, 0,
244 DC_I2C_DATA, *buffer++);
245 dce_i2c_hw->buffer_used_write++;
246 --length;
247 }
248 }
249
250 ++dce_i2c_hw->transaction_count;
251 dce_i2c_hw->buffer_used_bytes += length + 1;
252
253 return last_transaction;
254}
255
256static inline void reset_hw_engine(struct dce_i2c_hw *dce_i2c_hw)
257{
258 REG_UPDATE_2(DC_I2C_CONTROL,
259 DC_I2C_SW_STATUS_RESET, 1,
260 DC_I2C_SW_STATUS_RESET, 1);
261}
262
263static void set_speed(
264 struct dce_i2c_hw *dce_i2c_hw,
265 uint32_t speed)
266{
267 uint32_t xtal_ref_div = 0, ref_base_div = 0;
268 uint32_t prescale = 0;
269 uint32_t i2c_ref_clock = 0;
270
271 if (speed == 0)
272 return;
273
274 REG_GET_2(MICROSECOND_TIME_BASE_DIV, MICROSECOND_TIME_BASE_DIV, &ref_base_div,
275 XTAL_REF_DIV, &xtal_ref_div);
276
277 if (xtal_ref_div == 0)
278 xtal_ref_div = 2;
279
280 if (ref_base_div == 0)
281 i2c_ref_clock = (dce_i2c_hw->reference_frequency * 2);
282 else
283 i2c_ref_clock = ref_base_div * 1000;
284
285 prescale = (i2c_ref_clock / xtal_ref_div) / speed;
286
287 if (dce_i2c_hw->masks->DC_I2C_DDC1_START_STOP_TIMING_CNTL)
288 REG_UPDATE_N(SPEED, 3,
289 FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
290 FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2,
291 FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_START_STOP_TIMING_CNTL), speed > 50 ? 2:1);
292 else
293 REG_UPDATE_N(SPEED, 2,
294 FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), prescale,
295 FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2);
296}
297
298static bool setup_engine(
299 struct dce_i2c_hw *dce_i2c_hw)
300{
301 uint32_t i2c_setup_limit = I2C_SETUP_TIME_LIMIT_DCE;
302 uint32_t reset_length = 0;
303
304 if (dce_i2c_hw->ctx->dc->debug.enable_mem_low_power.bits.i2c) {
305 if (dce_i2c_hw->regs->DIO_MEM_PWR_CTRL) {
306 REG_UPDATE(DIO_MEM_PWR_CTRL, I2C_LIGHT_SLEEP_FORCE, 0);
307 REG_WAIT(DIO_MEM_PWR_STATUS, I2C_MEM_PWR_STATE, 0, 0, 5);
308 }
309 }
310
311 if (dce_i2c_hw->masks->DC_I2C_DDC1_CLK_EN)
312 REG_UPDATE_N(SETUP, 1,
313 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_CLK_EN), 1);
314
315 /* we have checked I2c not used by DMCU, set SW use I2C REQ to 1 to indicate SW using it*/
316 REG_UPDATE(DC_I2C_ARBITRATION, DC_I2C_SW_USE_I2C_REG_REQ, 1);
317
318 /* we have checked I2c not used by DMCU, set SW use I2C REQ to 1 to indicate SW using it*/
319 REG_UPDATE(DC_I2C_ARBITRATION, DC_I2C_SW_USE_I2C_REG_REQ, 1);
320
321 /*set SW requested I2c speed to default, if API calls in it will be override later*/
322 set_speed(dce_i2c_hw, speed: dce_i2c_hw->ctx->dc->caps.i2c_speed_in_khz);
323
324 if (dce_i2c_hw->setup_limit != 0)
325 i2c_setup_limit = dce_i2c_hw->setup_limit;
326
327 /* Program pin select */
328 REG_UPDATE_6(DC_I2C_CONTROL,
329 DC_I2C_GO, 0,
330 DC_I2C_SOFT_RESET, 0,
331 DC_I2C_SEND_RESET, 0,
332 DC_I2C_SW_STATUS_RESET, 1,
333 DC_I2C_TRANSACTION_COUNT, 0,
334 DC_I2C_DDC_SELECT, dce_i2c_hw->engine_id);
335
336 /* Program time limit */
337 if (dce_i2c_hw->send_reset_length == 0) {
338 /*pre-dcn*/
339 REG_UPDATE_N(SETUP, 2,
340 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_TIME_LIMIT), i2c_setup_limit,
341 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_ENABLE), 1);
342 } else {
343 reset_length = dce_i2c_hw->send_reset_length;
344 REG_UPDATE_N(SETUP, 3,
345 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_TIME_LIMIT), i2c_setup_limit,
346 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_SEND_RESET_LENGTH), reset_length,
347 FN(DC_I2C_DDC1_SETUP, DC_I2C_DDC1_ENABLE), 1);
348 }
349 /* Program HW priority
350 * set to High - interrupt software I2C at any time
351 * Enable restart of SW I2C that was interrupted by HW
352 * disable queuing of software while I2C is in use by HW
353 */
354 REG_UPDATE(DC_I2C_ARBITRATION,
355 DC_I2C_NO_QUEUED_SW_GO, 0);
356
357 return true;
358}
359
360static void release_engine(
361 struct dce_i2c_hw *dce_i2c_hw)
362{
363 bool safe_to_reset;
364
365
366 /* Reset HW engine */
367 {
368 uint32_t i2c_sw_status = 0;
369
370 REG_GET(DC_I2C_SW_STATUS, DC_I2C_SW_STATUS, &i2c_sw_status);
371 /* if used by SW, safe to reset */
372 safe_to_reset = (i2c_sw_status == 1);
373 }
374
375 if (safe_to_reset)
376 REG_UPDATE_2(DC_I2C_CONTROL,
377 DC_I2C_SOFT_RESET, 1,
378 DC_I2C_SW_STATUS_RESET, 1);
379 else
380 REG_UPDATE(DC_I2C_CONTROL, DC_I2C_SW_STATUS_RESET, 1);
381 /* HW I2c engine - clock gating feature */
382 if (!dce_i2c_hw->engine_keep_power_up_count)
383 REG_UPDATE_N(SETUP, 1, FN(SETUP, DC_I2C_DDC1_ENABLE), 0);
384
385 /*for HW HDCP Ri polling failure w/a test*/
386 set_speed(dce_i2c_hw, speed: dce_i2c_hw->ctx->dc->caps.i2c_speed_in_khz_hdcp);
387 /* Release I2C after reset, so HW or DMCU could use it */
388 REG_UPDATE_2(DC_I2C_ARBITRATION, DC_I2C_SW_DONE_USING_I2C_REG, 1,
389 DC_I2C_SW_USE_I2C_REG_REQ, 0);
390
391 if (dce_i2c_hw->ctx->dc->debug.enable_mem_low_power.bits.i2c) {
392 if (dce_i2c_hw->regs->DIO_MEM_PWR_CTRL)
393 REG_UPDATE(DIO_MEM_PWR_CTRL, I2C_LIGHT_SLEEP_FORCE, 1);
394 }
395}
396
397struct dce_i2c_hw *acquire_i2c_hw_engine(
398 struct resource_pool *pool,
399 struct ddc *ddc)
400{
401 uint32_t counter = 0;
402 enum gpio_result result;
403 struct dce_i2c_hw *dce_i2c_hw = NULL;
404
405 if (!ddc)
406 return NULL;
407
408 if (ddc->hw_info.hw_supported) {
409 enum gpio_ddc_line line = dal_ddc_get_line(ddc);
410
411 if (line < pool->res_cap->num_ddc)
412 dce_i2c_hw = pool->hw_i2cs[line];
413 }
414
415 if (!dce_i2c_hw)
416 return NULL;
417
418 if (pool->i2c_hw_buffer_in_use || !is_engine_available(dce_i2c_hw))
419 return NULL;
420
421 do {
422 result = dal_ddc_open(ddc, mode: GPIO_MODE_HARDWARE,
423 config_type: GPIO_DDC_CONFIG_TYPE_MODE_I2C);
424
425 if (result == GPIO_RESULT_OK)
426 break;
427
428 /* i2c_engine is busy by VBios, lets wait and retry */
429
430 udelay(10);
431
432 ++counter;
433 } while (counter < 2);
434
435 if (result != GPIO_RESULT_OK)
436 return NULL;
437
438 dce_i2c_hw->ddc = ddc;
439
440 if (!setup_engine(dce_i2c_hw)) {
441 release_engine(dce_i2c_hw);
442 return NULL;
443 }
444
445 pool->i2c_hw_buffer_in_use = true;
446 return dce_i2c_hw;
447}
448
449static enum i2c_channel_operation_result dce_i2c_hw_engine_wait_on_operation_result(struct dce_i2c_hw *dce_i2c_hw,
450 uint32_t timeout,
451 enum i2c_channel_operation_result expected_result)
452{
453 enum i2c_channel_operation_result result;
454 uint32_t i = 0;
455
456 if (!timeout)
457 return I2C_CHANNEL_OPERATION_SUCCEEDED;
458
459 do {
460
461 result = get_channel_status(
462 dce_i2c_hw, NULL);
463
464 if (result != expected_result)
465 break;
466
467 udelay(1);
468
469 ++i;
470 } while (i < timeout);
471 return result;
472}
473
474static void submit_channel_request_hw(
475 struct dce_i2c_hw *dce_i2c_hw,
476 struct i2c_request_transaction_data *request)
477{
478 request->status = I2C_CHANNEL_OPERATION_SUCCEEDED;
479
480 if (!process_transaction(dce_i2c_hw, request))
481 return;
482
483 if (is_hw_busy(dce_i2c_hw)) {
484 request->status = I2C_CHANNEL_OPERATION_ENGINE_BUSY;
485 return;
486 }
487 reset_hw_engine(dce_i2c_hw);
488
489 execute_transaction(dce_i2c_hw);
490
491
492}
493
494static uint32_t get_transaction_timeout_hw(
495 const struct dce_i2c_hw *dce_i2c_hw,
496 uint32_t length,
497 uint32_t speed)
498{
499 uint32_t period_timeout;
500 uint32_t num_of_clock_stretches;
501
502 if (!speed)
503 return 0;
504
505 period_timeout = (1000 * TRANSACTION_TIMEOUT_IN_I2C_CLOCKS) / speed;
506
507 num_of_clock_stretches = 1 + (length << 3) + 1;
508 num_of_clock_stretches +=
509 (dce_i2c_hw->buffer_used_bytes << 3) +
510 (dce_i2c_hw->transaction_count << 1);
511
512 return period_timeout * num_of_clock_stretches;
513}
514
515static bool dce_i2c_hw_engine_submit_payload(struct dce_i2c_hw *dce_i2c_hw,
516 struct i2c_payload *payload,
517 bool middle_of_transaction,
518 uint32_t speed)
519{
520
521 struct i2c_request_transaction_data request;
522
523 uint32_t transaction_timeout;
524
525 enum i2c_channel_operation_result operation_result;
526
527 bool result = false;
528
529 /* We need following:
530 * transaction length will not exceed
531 * the number of free bytes in HW buffer (minus one for address)
532 */
533
534 if (payload->length >=
535 get_hw_buffer_available_size(dce_i2c_hw)) {
536 return false;
537 }
538
539 if (!payload->write)
540 request.action = middle_of_transaction ?
541 DCE_I2C_TRANSACTION_ACTION_I2C_READ_MOT :
542 DCE_I2C_TRANSACTION_ACTION_I2C_READ;
543 else
544 request.action = middle_of_transaction ?
545 DCE_I2C_TRANSACTION_ACTION_I2C_WRITE_MOT :
546 DCE_I2C_TRANSACTION_ACTION_I2C_WRITE;
547
548
549 request.address = (uint8_t) ((payload->address << 1) | !payload->write);
550 request.length = payload->length;
551 request.data = payload->data;
552
553 /* obtain timeout value before submitting request */
554
555 transaction_timeout = get_transaction_timeout_hw(
556 dce_i2c_hw, length: payload->length + 1, speed);
557
558 submit_channel_request_hw(
559 dce_i2c_hw, request: &request);
560
561 if ((request.status == I2C_CHANNEL_OPERATION_FAILED) ||
562 (request.status == I2C_CHANNEL_OPERATION_ENGINE_BUSY))
563 return false;
564
565 /* wait until transaction proceed */
566
567 operation_result = dce_i2c_hw_engine_wait_on_operation_result(
568 dce_i2c_hw,
569 timeout: transaction_timeout,
570 expected_result: I2C_CHANNEL_OPERATION_ENGINE_BUSY);
571
572 /* update transaction status */
573
574 if (operation_result == I2C_CHANNEL_OPERATION_SUCCEEDED)
575 result = true;
576
577 if (result && (!payload->write))
578 process_channel_reply(dce_i2c_hw, reply: payload);
579
580 return result;
581}
582
583bool dce_i2c_submit_command_hw(
584 struct resource_pool *pool,
585 struct ddc *ddc,
586 struct i2c_command *cmd,
587 struct dce_i2c_hw *dce_i2c_hw)
588{
589 uint8_t index_of_payload = 0;
590 bool result;
591
592 set_speed(dce_i2c_hw, speed: cmd->speed);
593
594 result = true;
595
596 while (index_of_payload < cmd->number_of_payloads) {
597 bool mot = (index_of_payload != cmd->number_of_payloads - 1);
598
599 struct i2c_payload *payload = cmd->payloads + index_of_payload;
600
601 if (!dce_i2c_hw_engine_submit_payload(
602 dce_i2c_hw, payload, middle_of_transaction: mot, speed: cmd->speed)) {
603 result = false;
604 break;
605 }
606
607 ++index_of_payload;
608 }
609
610 pool->i2c_hw_buffer_in_use = false;
611
612 release_engine(dce_i2c_hw);
613 dal_ddc_close(ddc: dce_i2c_hw->ddc);
614
615 dce_i2c_hw->ddc = NULL;
616
617 return result;
618}
619
620void dce_i2c_hw_construct(
621 struct dce_i2c_hw *dce_i2c_hw,
622 struct dc_context *ctx,
623 uint32_t engine_id,
624 const struct dce_i2c_registers *regs,
625 const struct dce_i2c_shift *shifts,
626 const struct dce_i2c_mask *masks)
627{
628 dce_i2c_hw->ctx = ctx;
629 dce_i2c_hw->engine_id = engine_id;
630 dce_i2c_hw->reference_frequency = (ctx->dc_bios->fw_info.pll_info.crystal_frequency) >> 1;
631 dce_i2c_hw->regs = regs;
632 dce_i2c_hw->shifts = shifts;
633 dce_i2c_hw->masks = masks;
634 dce_i2c_hw->buffer_used_bytes = 0;
635 dce_i2c_hw->transaction_count = 0;
636 dce_i2c_hw->engine_keep_power_up_count = 1;
637 dce_i2c_hw->default_speed = DEFAULT_I2C_HW_SPEED;
638 dce_i2c_hw->send_reset_length = 0;
639 dce_i2c_hw->setup_limit = I2C_SETUP_TIME_LIMIT_DCE;
640 dce_i2c_hw->buffer_size = I2C_HW_BUFFER_SIZE_DCE;
641}
642
643void dce100_i2c_hw_construct(
644 struct dce_i2c_hw *dce_i2c_hw,
645 struct dc_context *ctx,
646 uint32_t engine_id,
647 const struct dce_i2c_registers *regs,
648 const struct dce_i2c_shift *shifts,
649 const struct dce_i2c_mask *masks)
650{
651 dce_i2c_hw_construct(dce_i2c_hw,
652 ctx,
653 engine_id,
654 regs,
655 shifts,
656 masks);
657 dce_i2c_hw->buffer_size = I2C_HW_BUFFER_SIZE_DCE100;
658}
659
660void dce112_i2c_hw_construct(
661 struct dce_i2c_hw *dce_i2c_hw,
662 struct dc_context *ctx,
663 uint32_t engine_id,
664 const struct dce_i2c_registers *regs,
665 const struct dce_i2c_shift *shifts,
666 const struct dce_i2c_mask *masks)
667{
668 dce100_i2c_hw_construct(dce_i2c_hw,
669 ctx,
670 engine_id,
671 regs,
672 shifts,
673 masks);
674 dce_i2c_hw->default_speed = DEFAULT_I2C_HW_SPEED_100KHZ;
675}
676
677void dcn1_i2c_hw_construct(
678 struct dce_i2c_hw *dce_i2c_hw,
679 struct dc_context *ctx,
680 uint32_t engine_id,
681 const struct dce_i2c_registers *regs,
682 const struct dce_i2c_shift *shifts,
683 const struct dce_i2c_mask *masks)
684{
685 dce112_i2c_hw_construct(dce_i2c_hw,
686 ctx,
687 engine_id,
688 regs,
689 shifts,
690 masks);
691 dce_i2c_hw->setup_limit = I2C_SETUP_TIME_LIMIT_DCN;
692}
693
694void dcn2_i2c_hw_construct(
695 struct dce_i2c_hw *dce_i2c_hw,
696 struct dc_context *ctx,
697 uint32_t engine_id,
698 const struct dce_i2c_registers *regs,
699 const struct dce_i2c_shift *shifts,
700 const struct dce_i2c_mask *masks)
701{
702 dcn1_i2c_hw_construct(dce_i2c_hw,
703 ctx,
704 engine_id,
705 regs,
706 shifts,
707 masks);
708 dce_i2c_hw->send_reset_length = I2C_SEND_RESET_LENGTH_9;
709 if (ctx->dc->debug.scl_reset_length10)
710 dce_i2c_hw->send_reset_length = I2C_SEND_RESET_LENGTH_10;
711}
712

source code of linux/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c