1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * OpenRISC tlb.c
4 *
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
7 * declaration.
8 *
9 * Modifications for the OpenRISC architecture:
10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11 * Copyright (C) 2010-2011 Julius Baxter <julius.baxter@orsoc.se>
12 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
13 */
14
15#include <linux/sched.h>
16#include <linux/kernel.h>
17#include <linux/errno.h>
18#include <linux/string.h>
19#include <linux/types.h>
20#include <linux/ptrace.h>
21#include <linux/mman.h>
22#include <linux/mm.h>
23#include <linux/init.h>
24
25#include <asm/tlbflush.h>
26#include <asm/mmu_context.h>
27#include <asm/spr_defs.h>
28
29#define NO_CONTEXT -1
30
31#define NUM_DTLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
32 SPR_DMMUCFGR_NTS_OFF))
33#define NUM_ITLB_SETS (1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> \
34 SPR_IMMUCFGR_NTS_OFF))
35#define DTLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_DTLB_SETS-1))
36#define ITLB_OFFSET(addr) (((addr) >> PAGE_SHIFT) & (NUM_ITLB_SETS-1))
37/*
38 * Invalidate all TLB entries.
39 *
40 * This comes down to setting the 'valid' bit for all xTLBMR registers to 0.
41 * Easiest way to accomplish this is to just zero out the xTLBMR register
42 * completely.
43 *
44 */
45
46void local_flush_tlb_all(void)
47{
48 int i;
49 unsigned long num_tlb_sets;
50
51 /* Determine number of sets for IMMU. */
52 /* FIXME: Assumption is I & D nsets equal. */
53 num_tlb_sets = NUM_ITLB_SETS;
54
55 for (i = 0; i < num_tlb_sets; i++) {
56 mtspr_off(SPR_DTLBMR_BASE(0), i, 0);
57 mtspr_off(SPR_ITLBMR_BASE(0), i, 0);
58 }
59}
60
61#define have_dtlbeir (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_TEIRI)
62#define have_itlbeir (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_TEIRI)
63
64/*
65 * Invalidate a single page. This is what the xTLBEIR register is for.
66 *
67 * There's no point in checking the vma for PAGE_EXEC to determine whether it's
68 * the data or instruction TLB that should be flushed... that would take more
69 * than the few instructions that the following compiles down to!
70 *
71 * The case where we don't have the xTLBEIR register really only works for
72 * MMU's with a single way and is hard-coded that way.
73 */
74
75#define flush_dtlb_page_eir(addr) mtspr(SPR_DTLBEIR, addr)
76#define flush_dtlb_page_no_eir(addr) \
77 mtspr_off(SPR_DTLBMR_BASE(0), DTLB_OFFSET(addr), 0);
78
79#define flush_itlb_page_eir(addr) mtspr(SPR_ITLBEIR, addr)
80#define flush_itlb_page_no_eir(addr) \
81 mtspr_off(SPR_ITLBMR_BASE(0), ITLB_OFFSET(addr), 0);
82
83void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
84{
85 if (have_dtlbeir)
86 flush_dtlb_page_eir(addr);
87 else
88 flush_dtlb_page_no_eir(addr);
89
90 if (have_itlbeir)
91 flush_itlb_page_eir(addr);
92 else
93 flush_itlb_page_no_eir(addr);
94}
95
96void local_flush_tlb_range(struct vm_area_struct *vma,
97 unsigned long start, unsigned long end)
98{
99 int addr;
100 bool dtlbeir;
101 bool itlbeir;
102
103 dtlbeir = have_dtlbeir;
104 itlbeir = have_itlbeir;
105
106 for (addr = start; addr < end; addr += PAGE_SIZE) {
107 if (dtlbeir)
108 flush_dtlb_page_eir(addr);
109 else
110 flush_dtlb_page_no_eir(addr);
111
112 if (itlbeir)
113 flush_itlb_page_eir(addr);
114 else
115 flush_itlb_page_no_eir(addr);
116 }
117}
118
119/*
120 * Invalidate the selected mm context only.
121 *
122 * FIXME: Due to some bug here, we're flushing everything for now.
123 * This should be changed to loop over over mm and call flush_tlb_range.
124 */
125
126void local_flush_tlb_mm(struct mm_struct *mm)
127{
128
129 /* Was seeing bugs with the mm struct passed to us. Scrapped most of
130 this function. */
131 /* Several architectures do this */
132 local_flush_tlb_all();
133}
134
135/* called in schedule() just before actually doing the switch_to */
136
137void switch_mm(struct mm_struct *prev, struct mm_struct *next,
138 struct task_struct *next_tsk)
139{
140 unsigned int cpu;
141
142 if (unlikely(prev == next))
143 return;
144
145 cpu = smp_processor_id();
146
147 cpumask_clear_cpu(cpu, dstp: mm_cpumask(mm: prev));
148 cpumask_set_cpu(cpu, dstp: mm_cpumask(mm: next));
149
150 /* remember the pgd for the fault handlers
151 * this is similar to the pgd register in some other CPU's.
152 * we need our own copy of it because current and active_mm
153 * might be invalid at points where we still need to derefer
154 * the pgd.
155 */
156 current_pgd[cpu] = next->pgd;
157
158 /* We don't have context support implemented, so flush all
159 * entries belonging to previous map
160 */
161 local_flush_tlb_mm(mm: prev);
162}
163
164/*
165 * Initialize the context related info for a new mm_struct
166 * instance.
167 */
168
169int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
170{
171 mm->context = NO_CONTEXT;
172 return 0;
173}
174
175/* called by __exit_mm to destroy the used MMU context if any before
176 * destroying the mm itself. this is only called when the last user of the mm
177 * drops it.
178 */
179
180void destroy_context(struct mm_struct *mm)
181{
182 flush_tlb_mm(mm);
183
184}
185

source code of linux/arch/openrisc/mm/tlb.c