1 | // SPDX-License-Identifier: GPL-2.0-or-later |
2 | /* |
3 | * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family |
4 | * of PCI-SCSI IO processors. |
5 | * |
6 | * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> |
7 | * Copyright (c) 2003-2005 Matthew Wilcox <matthew@wil.cx> |
8 | * |
9 | * This driver is derived from the Linux sym53c8xx driver. |
10 | * Copyright (C) 1998-2000 Gerard Roudier |
11 | * |
12 | * The sym53c8xx driver is derived from the ncr53c8xx driver that had been |
13 | * a port of the FreeBSD ncr driver to Linux-1.2.13. |
14 | * |
15 | * The original ncr driver has been written for 386bsd and FreeBSD by |
16 | * Wolfgang Stanglmeier <wolf@cologne.de> |
17 | * Stefan Esser <se@mi.Uni-Koeln.de> |
18 | * Copyright (C) 1994 Wolfgang Stanglmeier |
19 | * |
20 | * Other major contributions: |
21 | * |
22 | * NVRAM detection and reading. |
23 | * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> |
24 | * |
25 | *----------------------------------------------------------------------------- |
26 | */ |
27 | #include <linux/ctype.h> |
28 | #include <linux/init.h> |
29 | #include <linux/module.h> |
30 | #include <linux/moduleparam.h> |
31 | #include <linux/spinlock.h> |
32 | #include <scsi/scsi.h> |
33 | #include <scsi/scsi_tcq.h> |
34 | #include <scsi/scsi_device.h> |
35 | #include <scsi/scsi_transport.h> |
36 | |
37 | #include "sym_glue.h" |
38 | #include "sym_nvram.h" |
39 | |
40 | #define NAME53C "sym53c" |
41 | #define NAME53C8XX "sym53c8xx" |
42 | |
43 | struct sym_driver_setup sym_driver_setup = SYM_LINUX_DRIVER_SETUP; |
44 | unsigned int sym_debug_flags = 0; |
45 | |
46 | static char *excl_string; |
47 | static char *safe_string; |
48 | module_param_named(cmd_per_lun, sym_driver_setup.max_tag, ushort, 0); |
49 | module_param_named(burst, sym_driver_setup.burst_order, byte, 0); |
50 | module_param_named(led, sym_driver_setup.scsi_led, byte, 0); |
51 | module_param_named(diff, sym_driver_setup.scsi_diff, byte, 0); |
52 | module_param_named(irqm, sym_driver_setup.irq_mode, byte, 0); |
53 | module_param_named(buschk, sym_driver_setup.scsi_bus_check, byte, 0); |
54 | module_param_named(hostid, sym_driver_setup.host_id, byte, 0); |
55 | module_param_named(verb, sym_driver_setup.verbose, byte, 0); |
56 | module_param_named(debug, sym_debug_flags, uint, 0); |
57 | module_param_named(settle, sym_driver_setup.settle_delay, byte, 0); |
58 | module_param_named(nvram, sym_driver_setup.use_nvram, byte, 0); |
59 | module_param_named(excl, excl_string, charp, 0); |
60 | module_param_named(safe, safe_string, charp, 0); |
61 | |
62 | MODULE_PARM_DESC(cmd_per_lun, "The maximum number of tags to use by default" ); |
63 | MODULE_PARM_DESC(burst, "Maximum burst. 0 to disable, 255 to read from registers" ); |
64 | MODULE_PARM_DESC(led, "Set to 1 to enable LED support" ); |
65 | MODULE_PARM_DESC(diff, "0 for no differential mode, 1 for BIOS, 2 for always, 3 for not GPIO3" ); |
66 | MODULE_PARM_DESC(irqm, "0 for open drain, 1 to leave alone, 2 for totem pole" ); |
67 | MODULE_PARM_DESC(buschk, "0 to not check, 1 for detach on error, 2 for warn on error" ); |
68 | MODULE_PARM_DESC(hostid, "The SCSI ID to use for the host adapters" ); |
69 | MODULE_PARM_DESC(verb, "0 for minimal verbosity, 1 for normal, 2 for excessive" ); |
70 | MODULE_PARM_DESC(debug, "Set bits to enable debugging" ); |
71 | MODULE_PARM_DESC(settle, "Settle delay in seconds. Default 3" ); |
72 | MODULE_PARM_DESC(nvram, "Option currently not used" ); |
73 | MODULE_PARM_DESC(excl, "List ioport addresses here to prevent controllers from being attached" ); |
74 | MODULE_PARM_DESC(safe, "Set other settings to a \"safe mode\"" ); |
75 | |
76 | MODULE_LICENSE("GPL" ); |
77 | MODULE_VERSION(SYM_VERSION); |
78 | MODULE_AUTHOR("Matthew Wilcox <matthew@wil.cx>" ); |
79 | MODULE_DESCRIPTION("NCR, Symbios and LSI 8xx and 1010 PCI SCSI adapters" ); |
80 | |
81 | static void sym2_setup_params(void) |
82 | { |
83 | char *p = excl_string; |
84 | int xi = 0; |
85 | |
86 | while (p && (xi < 8)) { |
87 | char *next_p; |
88 | int val = (int) simple_strtoul(p, &next_p, 0); |
89 | sym_driver_setup.excludes[xi++] = val; |
90 | p = next_p; |
91 | } |
92 | |
93 | if (safe_string) { |
94 | if (*safe_string == 'y') { |
95 | sym_driver_setup.max_tag = 0; |
96 | sym_driver_setup.burst_order = 0; |
97 | sym_driver_setup.scsi_led = 0; |
98 | sym_driver_setup.scsi_diff = 1; |
99 | sym_driver_setup.irq_mode = 0; |
100 | sym_driver_setup.scsi_bus_check = 2; |
101 | sym_driver_setup.host_id = 7; |
102 | sym_driver_setup.verbose = 2; |
103 | sym_driver_setup.settle_delay = 10; |
104 | sym_driver_setup.use_nvram = 1; |
105 | } else if (*safe_string != 'n') { |
106 | printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s" |
107 | " passed to safe option" , safe_string); |
108 | } |
109 | } |
110 | } |
111 | |
112 | static struct scsi_transport_template *sym2_transport_template = NULL; |
113 | |
114 | /* |
115 | * Driver private area in the SCSI command structure. |
116 | */ |
117 | struct sym_ucmd { /* Override the SCSI pointer structure */ |
118 | struct completion *eh_done; /* SCSI error handling */ |
119 | }; |
120 | |
121 | #define SYM_UCMD_PTR(cmd) ((struct sym_ucmd *)scsi_cmd_priv(cmd)) |
122 | #define SYM_SOFTC_PTR(cmd) sym_get_hcb(cmd->device->host) |
123 | |
124 | /* |
125 | * Complete a pending CAM CCB. |
126 | */ |
127 | void sym_xpt_done(struct sym_hcb *np, struct scsi_cmnd *cmd) |
128 | { |
129 | struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); |
130 | |
131 | if (ucmd->eh_done) |
132 | complete(ucmd->eh_done); |
133 | |
134 | scsi_dma_unmap(cmd); |
135 | scsi_done(cmd); |
136 | } |
137 | |
138 | /* |
139 | * Tell the SCSI layer about a BUS RESET. |
140 | */ |
141 | void sym_xpt_async_bus_reset(struct sym_hcb *np) |
142 | { |
143 | printf_notice("%s: SCSI BUS has been reset.\n" , sym_name(np)); |
144 | np->s.settle_time = jiffies + sym_driver_setup.settle_delay * HZ; |
145 | np->s.settle_time_valid = 1; |
146 | if (sym_verbose >= 2) |
147 | printf_info("%s: command processing suspended for %d seconds\n" , |
148 | sym_name(np), sym_driver_setup.settle_delay); |
149 | } |
150 | |
151 | /* |
152 | * Choose the more appropriate CAM status if |
153 | * the IO encountered an extended error. |
154 | */ |
155 | static int sym_xerr_cam_status(int cam_status, int x_status) |
156 | { |
157 | if (x_status) { |
158 | if (x_status & XE_PARITY_ERR) |
159 | cam_status = DID_PARITY; |
160 | else |
161 | cam_status = DID_ERROR; |
162 | } |
163 | return cam_status; |
164 | } |
165 | |
166 | /* |
167 | * Build CAM result for a failed or auto-sensed IO. |
168 | */ |
169 | void sym_set_cam_result_error(struct sym_hcb *np, struct sym_ccb *cp, int resid) |
170 | { |
171 | struct scsi_cmnd *cmd = cp->cmd; |
172 | u_int cam_status, scsi_status; |
173 | |
174 | cam_status = DID_OK; |
175 | scsi_status = cp->ssss_status; |
176 | |
177 | if (cp->host_flags & HF_SENSE) { |
178 | scsi_status = cp->sv_scsi_status; |
179 | resid = cp->sv_resid; |
180 | if (sym_verbose && cp->sv_xerr_status) |
181 | sym_print_xerr(cmd, x_status: cp->sv_xerr_status); |
182 | if (cp->host_status == HS_COMPLETE && |
183 | cp->ssss_status == S_GOOD && |
184 | cp->xerr_status == 0) { |
185 | cam_status = sym_xerr_cam_status(cam_status: DID_OK, |
186 | x_status: cp->sv_xerr_status); |
187 | /* |
188 | * Bounce back the sense data to user. |
189 | */ |
190 | memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); |
191 | memcpy(cmd->sense_buffer, cp->sns_bbuf, |
192 | min(SCSI_SENSE_BUFFERSIZE, SYM_SNS_BBUF_LEN)); |
193 | #if 0 |
194 | /* |
195 | * If the device reports a UNIT ATTENTION condition |
196 | * due to a RESET condition, we should consider all |
197 | * disconnect CCBs for this unit as aborted. |
198 | */ |
199 | if (1) { |
200 | u_char *p; |
201 | p = (u_char *) cmd->sense_data; |
202 | if (p[0]==0x70 && p[2]==0x6 && p[12]==0x29) |
203 | sym_clear_tasks(np, DID_ABORT, |
204 | cp->target,cp->lun, -1); |
205 | } |
206 | #endif |
207 | } else { |
208 | /* |
209 | * Error return from our internal request sense. This |
210 | * is bad: we must clear the contingent allegiance |
211 | * condition otherwise the device will always return |
212 | * BUSY. Use a big stick. |
213 | */ |
214 | sym_reset_scsi_target(np, target: cmd->device->id); |
215 | cam_status = DID_ERROR; |
216 | } |
217 | } else if (cp->host_status == HS_COMPLETE) /* Bad SCSI status */ |
218 | cam_status = DID_OK; |
219 | else if (cp->host_status == HS_SEL_TIMEOUT) /* Selection timeout */ |
220 | cam_status = DID_NO_CONNECT; |
221 | else if (cp->host_status == HS_UNEXPECTED) /* Unexpected BUS FREE*/ |
222 | cam_status = DID_ERROR; |
223 | else { /* Extended error */ |
224 | if (sym_verbose) { |
225 | sym_print_addr(cmd, "COMMAND FAILED (%x %x %x).\n" , |
226 | cp->host_status, cp->ssss_status, |
227 | cp->xerr_status); |
228 | } |
229 | /* |
230 | * Set the most appropriate value for CAM status. |
231 | */ |
232 | cam_status = sym_xerr_cam_status(cam_status: DID_ERROR, x_status: cp->xerr_status); |
233 | } |
234 | scsi_set_resid(cmd, resid); |
235 | cmd->result = (cam_status << 16) | scsi_status; |
236 | } |
237 | |
238 | static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd *cmd) |
239 | { |
240 | int segment; |
241 | int use_sg; |
242 | |
243 | cp->data_len = 0; |
244 | |
245 | use_sg = scsi_dma_map(cmd); |
246 | if (use_sg > 0) { |
247 | struct scatterlist *sg; |
248 | struct sym_tcb *tp = &np->target[cp->target]; |
249 | struct sym_tblmove *data; |
250 | |
251 | if (use_sg > SYM_CONF_MAX_SG) { |
252 | scsi_dma_unmap(cmd); |
253 | return -1; |
254 | } |
255 | |
256 | data = &cp->phys.data[SYM_CONF_MAX_SG - use_sg]; |
257 | |
258 | scsi_for_each_sg(cmd, sg, use_sg, segment) { |
259 | dma_addr_t baddr = sg_dma_address(sg); |
260 | unsigned int len = sg_dma_len(sg); |
261 | |
262 | if ((len & 1) && (tp->head.wval & EWS)) { |
263 | len++; |
264 | cp->odd_byte_adjustment++; |
265 | } |
266 | |
267 | sym_build_sge(np, &data[segment], baddr, len); |
268 | cp->data_len += len; |
269 | } |
270 | } else { |
271 | segment = -2; |
272 | } |
273 | |
274 | return segment; |
275 | } |
276 | |
277 | /* |
278 | * Queue a SCSI command. |
279 | */ |
280 | static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd) |
281 | { |
282 | struct scsi_device *sdev = cmd->device; |
283 | struct sym_tcb *tp; |
284 | struct sym_lcb *lp; |
285 | struct sym_ccb *cp; |
286 | int order; |
287 | |
288 | /* |
289 | * Retrieve the target descriptor. |
290 | */ |
291 | tp = &np->target[sdev->id]; |
292 | |
293 | /* |
294 | * Select tagged/untagged. |
295 | */ |
296 | lp = sym_lp(tp, sdev->lun); |
297 | order = (lp && lp->s.reqtags) ? M_SIMPLE_TAG : 0; |
298 | |
299 | /* |
300 | * Queue the SCSI IO. |
301 | */ |
302 | cp = sym_get_ccb(np, cmd, tag_order: order); |
303 | if (!cp) |
304 | return 1; /* Means resource shortage */ |
305 | sym_queue_scsiio(np, csio: cmd, cp); |
306 | return 0; |
307 | } |
308 | |
309 | /* |
310 | * Setup buffers and pointers that address the CDB. |
311 | */ |
312 | static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp) |
313 | { |
314 | memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len); |
315 | |
316 | cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]); |
317 | cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len); |
318 | |
319 | return 0; |
320 | } |
321 | |
322 | /* |
323 | * Setup pointers that address the data and start the I/O. |
324 | */ |
325 | int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp) |
326 | { |
327 | u32 lastp, goalp; |
328 | int dir; |
329 | |
330 | /* |
331 | * Build the CDB. |
332 | */ |
333 | if (sym_setup_cdb(np, cmd, cp)) |
334 | goto out_abort; |
335 | |
336 | /* |
337 | * No direction means no data. |
338 | */ |
339 | dir = cmd->sc_data_direction; |
340 | if (dir != DMA_NONE) { |
341 | cp->segments = sym_scatter(np, cp, cmd); |
342 | if (cp->segments < 0) { |
343 | sym_set_cam_status(cmd, status: DID_ERROR); |
344 | goto out_abort; |
345 | } |
346 | |
347 | /* |
348 | * No segments means no data. |
349 | */ |
350 | if (!cp->segments) |
351 | dir = DMA_NONE; |
352 | } else { |
353 | cp->data_len = 0; |
354 | cp->segments = 0; |
355 | } |
356 | |
357 | /* |
358 | * Set the data pointer. |
359 | */ |
360 | switch (dir) { |
361 | case DMA_BIDIRECTIONAL: |
362 | scmd_printk(KERN_INFO, cmd, "got DMA_BIDIRECTIONAL command" ); |
363 | sym_set_cam_status(cmd, status: DID_ERROR); |
364 | goto out_abort; |
365 | case DMA_TO_DEVICE: |
366 | goalp = SCRIPTA_BA(np, data_out2) + 8; |
367 | lastp = goalp - 8 - (cp->segments * (2*4)); |
368 | break; |
369 | case DMA_FROM_DEVICE: |
370 | cp->host_flags |= HF_DATA_IN; |
371 | goalp = SCRIPTA_BA(np, data_in2) + 8; |
372 | lastp = goalp - 8 - (cp->segments * (2*4)); |
373 | break; |
374 | case DMA_NONE: |
375 | default: |
376 | lastp = goalp = SCRIPTB_BA(np, no_data); |
377 | break; |
378 | } |
379 | |
380 | /* |
381 | * Set all pointers values needed by SCRIPTS. |
382 | */ |
383 | cp->phys.head.lastp = cpu_to_scr(lastp); |
384 | cp->phys.head.savep = cpu_to_scr(lastp); |
385 | cp->startp = cp->phys.head.savep; |
386 | cp->goalp = cpu_to_scr(goalp); |
387 | |
388 | /* |
389 | * When `#ifed 1', the code below makes the driver |
390 | * panic on the first attempt to write to a SCSI device. |
391 | * It is the first test we want to do after a driver |
392 | * change that does not seem obviously safe. :) |
393 | */ |
394 | #if 0 |
395 | switch (cp->cdb_buf[0]) { |
396 | case 0x0A: case 0x2A: case 0xAA: |
397 | panic("XXXXXXXXXXXXX WRITE NOT YET ALLOWED XXXXXXXXXXXXXX\n" ); |
398 | break; |
399 | default: |
400 | break; |
401 | } |
402 | #endif |
403 | |
404 | /* |
405 | * activate this job. |
406 | */ |
407 | sym_put_start_queue(np, cp); |
408 | return 0; |
409 | |
410 | out_abort: |
411 | sym_free_ccb(np, cp); |
412 | sym_xpt_done(np, cmd); |
413 | return 0; |
414 | } |
415 | |
416 | |
417 | /* |
418 | * timer daemon. |
419 | * |
420 | * Misused to keep the driver running when |
421 | * interrupts are not configured correctly. |
422 | */ |
423 | static void sym_timer(struct sym_hcb *np) |
424 | { |
425 | unsigned long thistime = jiffies; |
426 | |
427 | /* |
428 | * Restart the timer. |
429 | */ |
430 | np->s.timer.expires = thistime + SYM_CONF_TIMER_INTERVAL; |
431 | add_timer(timer: &np->s.timer); |
432 | |
433 | /* |
434 | * If we are resetting the ncr, wait for settle_time before |
435 | * clearing it. Then command processing will be resumed. |
436 | */ |
437 | if (np->s.settle_time_valid) { |
438 | if (time_before_eq(np->s.settle_time, thistime)) { |
439 | if (sym_verbose >= 2 ) |
440 | printk("%s: command processing resumed\n" , |
441 | sym_name(np)); |
442 | np->s.settle_time_valid = 0; |
443 | } |
444 | return; |
445 | } |
446 | |
447 | /* |
448 | * Nothing to do for now, but that may come. |
449 | */ |
450 | if (np->s.lasttime + 4*HZ < thistime) { |
451 | np->s.lasttime = thistime; |
452 | } |
453 | |
454 | #ifdef SYM_CONF_PCIQ_MAY_MISS_COMPLETIONS |
455 | /* |
456 | * Some way-broken PCI bridges may lead to |
457 | * completions being lost when the clearing |
458 | * of the INTFLY flag by the CPU occurs |
459 | * concurrently with the chip raising this flag. |
460 | * If this ever happen, lost completions will |
461 | * be reaped here. |
462 | */ |
463 | sym_wakeup_done(np); |
464 | #endif |
465 | } |
466 | |
467 | |
468 | /* |
469 | * PCI BUS error handler. |
470 | */ |
471 | void sym_log_bus_error(struct Scsi_Host *shost) |
472 | { |
473 | struct sym_data *sym_data = shost_priv(shost); |
474 | struct pci_dev *pdev = sym_data->pdev; |
475 | unsigned short pci_sts; |
476 | pci_read_config_word(dev: pdev, PCI_STATUS, val: &pci_sts); |
477 | if (pci_sts & 0xf900) { |
478 | pci_write_config_word(dev: pdev, PCI_STATUS, val: pci_sts); |
479 | shost_printk(KERN_WARNING, shost, |
480 | "PCI bus error: status = 0x%04x\n" , pci_sts & 0xf900); |
481 | } |
482 | } |
483 | |
484 | /* |
485 | * queuecommand method. Entered with the host adapter lock held and |
486 | * interrupts disabled. |
487 | */ |
488 | static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd) |
489 | { |
490 | struct sym_hcb *np = SYM_SOFTC_PTR(cmd); |
491 | struct sym_ucmd *ucp = SYM_UCMD_PTR(cmd); |
492 | int sts = 0; |
493 | |
494 | memset(ucp, 0, sizeof(*ucp)); |
495 | |
496 | /* |
497 | * Shorten our settle_time if needed for |
498 | * this command not to time out. |
499 | */ |
500 | if (np->s.settle_time_valid && scsi_cmd_to_rq(scmd: cmd)->timeout) { |
501 | unsigned long tlimit = jiffies + scsi_cmd_to_rq(scmd: cmd)->timeout; |
502 | tlimit -= SYM_CONF_TIMER_INTERVAL*2; |
503 | if (time_after(np->s.settle_time, tlimit)) { |
504 | np->s.settle_time = tlimit; |
505 | } |
506 | } |
507 | |
508 | if (np->s.settle_time_valid) |
509 | return SCSI_MLQUEUE_HOST_BUSY; |
510 | |
511 | sts = sym_queue_command(np, cmd); |
512 | if (sts) |
513 | return SCSI_MLQUEUE_HOST_BUSY; |
514 | return 0; |
515 | } |
516 | |
517 | static DEF_SCSI_QCMD(sym53c8xx_queue_command) |
518 | |
519 | /* |
520 | * Linux entry point of the interrupt handler. |
521 | */ |
522 | static irqreturn_t sym53c8xx_intr(int irq, void *dev_id) |
523 | { |
524 | struct Scsi_Host *shost = dev_id; |
525 | struct sym_data *sym_data = shost_priv(shost); |
526 | irqreturn_t result; |
527 | |
528 | /* Avoid spinloop trying to handle interrupts on frozen device */ |
529 | if (pci_channel_offline(pdev: sym_data->pdev)) |
530 | return IRQ_NONE; |
531 | |
532 | if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[" ); |
533 | |
534 | spin_lock(lock: shost->host_lock); |
535 | result = sym_interrupt(shost); |
536 | spin_unlock(lock: shost->host_lock); |
537 | |
538 | if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("]\n" ); |
539 | |
540 | return result; |
541 | } |
542 | |
543 | /* |
544 | * Linux entry point of the timer handler |
545 | */ |
546 | static void sym53c8xx_timer(struct timer_list *t) |
547 | { |
548 | struct sym_hcb *np = from_timer(np, t, s.timer); |
549 | unsigned long flags; |
550 | |
551 | spin_lock_irqsave(np->s.host->host_lock, flags); |
552 | sym_timer(np); |
553 | spin_unlock_irqrestore(lock: np->s.host->host_lock, flags); |
554 | } |
555 | |
556 | |
557 | /* |
558 | * What the eh thread wants us to perform. |
559 | */ |
560 | #define SYM_EH_ABORT 0 |
561 | #define SYM_EH_DEVICE_RESET 1 |
562 | |
563 | /* |
564 | * Generic method for our eh processing. |
565 | * The 'op' argument tells what we have to do. |
566 | */ |
567 | /* |
568 | * Error handlers called from the eh thread (one thread per HBA). |
569 | */ |
570 | static int sym53c8xx_eh_abort_handler(struct scsi_cmnd *cmd) |
571 | { |
572 | struct sym_ucmd *ucmd = SYM_UCMD_PTR(cmd); |
573 | struct Scsi_Host *shost = cmd->device->host; |
574 | struct sym_data *sym_data = shost_priv(shost); |
575 | struct pci_dev *pdev = sym_data->pdev; |
576 | struct sym_hcb *np = sym_data->ncb; |
577 | SYM_QUEHEAD *qp; |
578 | int cmd_queued = 0; |
579 | int sts = -1; |
580 | struct completion eh_done; |
581 | |
582 | scmd_printk(KERN_WARNING, cmd, "ABORT operation started\n" ); |
583 | |
584 | /* |
585 | * Escalate to host reset if the PCI bus went down |
586 | */ |
587 | if (pci_channel_offline(pdev)) |
588 | return SCSI_FAILED; |
589 | |
590 | spin_lock_irq(lock: shost->host_lock); |
591 | /* This one is queued in some place -> to wait for completion */ |
592 | FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { |
593 | struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); |
594 | if (cp->cmd == cmd) { |
595 | cmd_queued = 1; |
596 | break; |
597 | } |
598 | } |
599 | |
600 | sts = sym_abort_scsiio(np, ccb: cmd, timed_out: 1); |
601 | /* On error, restore everything and cross fingers :) */ |
602 | if (sts) |
603 | cmd_queued = 0; |
604 | |
605 | if (cmd_queued) { |
606 | init_completion(x: &eh_done); |
607 | ucmd->eh_done = &eh_done; |
608 | spin_unlock_irq(lock: shost->host_lock); |
609 | if (!wait_for_completion_timeout(x: &eh_done, timeout: 5*HZ)) { |
610 | ucmd->eh_done = NULL; |
611 | sts = -2; |
612 | } |
613 | } else { |
614 | spin_unlock_irq(lock: shost->host_lock); |
615 | } |
616 | |
617 | dev_warn(&cmd->device->sdev_gendev, "ABORT operation %s.\n" , |
618 | sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed" ); |
619 | return sts ? SCSI_FAILED : SCSI_SUCCESS; |
620 | } |
621 | |
622 | static int sym53c8xx_eh_target_reset_handler(struct scsi_cmnd *cmd) |
623 | { |
624 | struct scsi_target *starget = scsi_target(sdev: cmd->device); |
625 | struct Scsi_Host *shost = dev_to_shost(dev: starget->dev.parent); |
626 | struct sym_data *sym_data = shost_priv(shost); |
627 | struct pci_dev *pdev = sym_data->pdev; |
628 | struct sym_hcb *np = sym_data->ncb; |
629 | SYM_QUEHEAD *qp; |
630 | int sts; |
631 | struct completion eh_done; |
632 | |
633 | starget_printk(KERN_WARNING, starget, |
634 | "TARGET RESET operation started\n" ); |
635 | |
636 | /* |
637 | * Escalate to host reset if the PCI bus went down |
638 | */ |
639 | if (pci_channel_offline(pdev)) |
640 | return SCSI_FAILED; |
641 | |
642 | spin_lock_irq(lock: shost->host_lock); |
643 | sts = sym_reset_scsi_target(np, target: starget->id); |
644 | if (!sts) { |
645 | FOR_EACH_QUEUED_ELEMENT(&np->busy_ccbq, qp) { |
646 | struct sym_ccb *cp = sym_que_entry(qp, struct sym_ccb, |
647 | link_ccbq); |
648 | struct scsi_cmnd *cmd = cp->cmd; |
649 | struct sym_ucmd *ucmd; |
650 | |
651 | if (!cmd || cmd->device->channel != starget->channel || |
652 | cmd->device->id != starget->id) |
653 | continue; |
654 | |
655 | ucmd = SYM_UCMD_PTR(cmd); |
656 | init_completion(x: &eh_done); |
657 | ucmd->eh_done = &eh_done; |
658 | spin_unlock_irq(lock: shost->host_lock); |
659 | if (!wait_for_completion_timeout(x: &eh_done, timeout: 5*HZ)) { |
660 | ucmd->eh_done = NULL; |
661 | sts = -2; |
662 | } |
663 | spin_lock_irq(lock: shost->host_lock); |
664 | } |
665 | } |
666 | spin_unlock_irq(lock: shost->host_lock); |
667 | |
668 | starget_printk(KERN_WARNING, starget, "TARGET RESET operation %s.\n" , |
669 | sts==0 ? "complete" :sts==-2 ? "timed-out" : "failed" ); |
670 | return SCSI_SUCCESS; |
671 | } |
672 | |
673 | static int sym53c8xx_eh_bus_reset_handler(struct scsi_cmnd *cmd) |
674 | { |
675 | struct Scsi_Host *shost = cmd->device->host; |
676 | struct sym_data *sym_data = shost_priv(shost); |
677 | struct pci_dev *pdev = sym_data->pdev; |
678 | struct sym_hcb *np = sym_data->ncb; |
679 | |
680 | scmd_printk(KERN_WARNING, cmd, "BUS RESET operation started\n" ); |
681 | |
682 | /* |
683 | * Escalate to host reset if the PCI bus went down |
684 | */ |
685 | if (pci_channel_offline(pdev)) |
686 | return SCSI_FAILED; |
687 | |
688 | spin_lock_irq(lock: shost->host_lock); |
689 | sym_reset_scsi_bus(np, enab_int: 1); |
690 | spin_unlock_irq(lock: shost->host_lock); |
691 | |
692 | dev_warn(&cmd->device->sdev_gendev, "BUS RESET operation complete.\n" ); |
693 | return SCSI_SUCCESS; |
694 | } |
695 | |
696 | static int sym53c8xx_eh_host_reset_handler(struct scsi_cmnd *cmd) |
697 | { |
698 | struct Scsi_Host *shost = cmd->device->host; |
699 | struct sym_data *sym_data = shost_priv(shost); |
700 | struct pci_dev *pdev = sym_data->pdev; |
701 | struct sym_hcb *np = sym_data->ncb; |
702 | struct completion eh_done; |
703 | int finished_reset = 1; |
704 | |
705 | shost_printk(KERN_WARNING, shost, "HOST RESET operation started\n" ); |
706 | |
707 | /* We may be in an error condition because the PCI bus |
708 | * went down. In this case, we need to wait until the |
709 | * PCI bus is reset, the card is reset, and only then |
710 | * proceed with the scsi error recovery. There's no |
711 | * point in hurrying; take a leisurely wait. |
712 | */ |
713 | #define WAIT_FOR_PCI_RECOVERY 35 |
714 | if (pci_channel_offline(pdev)) { |
715 | init_completion(x: &eh_done); |
716 | spin_lock_irq(lock: shost->host_lock); |
717 | /* Make sure we didn't race */ |
718 | if (pci_channel_offline(pdev)) { |
719 | BUG_ON(sym_data->io_reset); |
720 | sym_data->io_reset = &eh_done; |
721 | finished_reset = 0; |
722 | } |
723 | spin_unlock_irq(lock: shost->host_lock); |
724 | if (!finished_reset) |
725 | finished_reset = wait_for_completion_timeout |
726 | (x: sym_data->io_reset, |
727 | WAIT_FOR_PCI_RECOVERY*HZ); |
728 | spin_lock_irq(lock: shost->host_lock); |
729 | sym_data->io_reset = NULL; |
730 | spin_unlock_irq(lock: shost->host_lock); |
731 | } |
732 | |
733 | if (finished_reset) { |
734 | sym_reset_scsi_bus(np, enab_int: 0); |
735 | sym_start_up(shost, reason: 1); |
736 | } |
737 | |
738 | shost_printk(KERN_WARNING, shost, "HOST RESET operation %s.\n" , |
739 | finished_reset==1 ? "complete" : "failed" ); |
740 | return finished_reset ? SCSI_SUCCESS : SCSI_FAILED; |
741 | } |
742 | |
743 | /* |
744 | * Tune device queuing depth, according to various limits. |
745 | */ |
746 | static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags) |
747 | { |
748 | struct sym_lcb *lp = sym_lp(tp, lun); |
749 | u_short oldtags; |
750 | |
751 | if (!lp) |
752 | return; |
753 | |
754 | oldtags = lp->s.reqtags; |
755 | |
756 | if (reqtags > lp->s.scdev_depth) |
757 | reqtags = lp->s.scdev_depth; |
758 | |
759 | lp->s.reqtags = reqtags; |
760 | |
761 | if (reqtags != oldtags) { |
762 | dev_info(&tp->starget->dev, |
763 | "tagged command queuing %s, command queue depth %d.\n" , |
764 | lp->s.reqtags ? "enabled" : "disabled" , reqtags); |
765 | } |
766 | } |
767 | |
768 | static int sym53c8xx_slave_alloc(struct scsi_device *sdev) |
769 | { |
770 | struct sym_hcb *np = sym_get_hcb(host: sdev->host); |
771 | struct sym_tcb *tp = &np->target[sdev->id]; |
772 | struct sym_lcb *lp; |
773 | unsigned long flags; |
774 | int error; |
775 | |
776 | if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN) |
777 | return -ENXIO; |
778 | |
779 | spin_lock_irqsave(np->s.host->host_lock, flags); |
780 | |
781 | /* |
782 | * Fail the device init if the device is flagged NOSCAN at BOOT in |
783 | * the NVRAM. This may speed up boot and maintain coherency with |
784 | * BIOS device numbering. Clearing the flag allows the user to |
785 | * rescan skipped devices later. We also return an error for |
786 | * devices not flagged for SCAN LUNS in the NVRAM since some single |
787 | * lun devices behave badly when asked for a non zero LUN. |
788 | */ |
789 | |
790 | if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) { |
791 | tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED; |
792 | starget_printk(KERN_INFO, sdev->sdev_target, |
793 | "Scan at boot disabled in NVRAM\n" ); |
794 | error = -ENXIO; |
795 | goto out; |
796 | } |
797 | |
798 | if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) { |
799 | if (sdev->lun != 0) { |
800 | error = -ENXIO; |
801 | goto out; |
802 | } |
803 | starget_printk(KERN_INFO, sdev->sdev_target, |
804 | "Multiple LUNs disabled in NVRAM\n" ); |
805 | } |
806 | |
807 | lp = sym_alloc_lcb(np, tn: sdev->id, ln: sdev->lun); |
808 | if (!lp) { |
809 | error = -ENOMEM; |
810 | goto out; |
811 | } |
812 | if (tp->nlcb == 1) |
813 | tp->starget = sdev->sdev_target; |
814 | |
815 | spi_min_period(tp->starget) = tp->usr_period; |
816 | spi_max_width(tp->starget) = tp->usr_width; |
817 | |
818 | error = 0; |
819 | out: |
820 | spin_unlock_irqrestore(lock: np->s.host->host_lock, flags); |
821 | |
822 | return error; |
823 | } |
824 | |
825 | /* |
826 | * Linux entry point for device queue sizing. |
827 | */ |
828 | static int sym53c8xx_slave_configure(struct scsi_device *sdev) |
829 | { |
830 | struct sym_hcb *np = sym_get_hcb(host: sdev->host); |
831 | struct sym_tcb *tp = &np->target[sdev->id]; |
832 | struct sym_lcb *lp = sym_lp(tp, sdev->lun); |
833 | int reqtags, depth_to_use; |
834 | |
835 | /* |
836 | * Get user flags. |
837 | */ |
838 | lp->curr_flags = lp->user_flags; |
839 | |
840 | /* |
841 | * Select queue depth from driver setup. |
842 | * Do not use more than configured by user. |
843 | * Use at least 1. |
844 | * Do not use more than our maximum. |
845 | */ |
846 | reqtags = sym_driver_setup.max_tag; |
847 | if (reqtags > tp->usrtags) |
848 | reqtags = tp->usrtags; |
849 | if (!sdev->tagged_supported) |
850 | reqtags = 0; |
851 | if (reqtags > SYM_CONF_MAX_TAG) |
852 | reqtags = SYM_CONF_MAX_TAG; |
853 | depth_to_use = reqtags ? reqtags : 1; |
854 | scsi_change_queue_depth(sdev, depth_to_use); |
855 | lp->s.scdev_depth = depth_to_use; |
856 | sym_tune_dev_queuing(tp, lun: sdev->lun, reqtags); |
857 | |
858 | if (!spi_initial_dv(sdev->sdev_target)) |
859 | spi_dv_device(sdev); |
860 | |
861 | return 0; |
862 | } |
863 | |
864 | static void sym53c8xx_slave_destroy(struct scsi_device *sdev) |
865 | { |
866 | struct sym_hcb *np = sym_get_hcb(host: sdev->host); |
867 | struct sym_tcb *tp = &np->target[sdev->id]; |
868 | struct sym_lcb *lp = sym_lp(tp, sdev->lun); |
869 | unsigned long flags; |
870 | |
871 | /* if slave_alloc returned before allocating a sym_lcb, return */ |
872 | if (!lp) |
873 | return; |
874 | |
875 | spin_lock_irqsave(np->s.host->host_lock, flags); |
876 | |
877 | if (lp->busy_itlq || lp->busy_itl) { |
878 | /* |
879 | * This really shouldn't happen, but we can't return an error |
880 | * so let's try to stop all on-going I/O. |
881 | */ |
882 | starget_printk(KERN_WARNING, tp->starget, |
883 | "Removing busy LCB (%d)\n" , (u8)sdev->lun); |
884 | sym_reset_scsi_bus(np, enab_int: 1); |
885 | } |
886 | |
887 | if (sym_free_lcb(np, tn: sdev->id, ln: sdev->lun) == 0) { |
888 | /* |
889 | * It was the last unit for this target. |
890 | */ |
891 | tp->head.sval = 0; |
892 | tp->head.wval = np->rv_scntl3; |
893 | tp->head.uval = 0; |
894 | tp->tgoal.check_nego = 1; |
895 | tp->starget = NULL; |
896 | } |
897 | |
898 | spin_unlock_irqrestore(lock: np->s.host->host_lock, flags); |
899 | } |
900 | |
901 | /* |
902 | * Linux entry point for info() function |
903 | */ |
904 | static const char *sym53c8xx_info (struct Scsi_Host *host) |
905 | { |
906 | return SYM_DRIVER_NAME; |
907 | } |
908 | |
909 | |
910 | #ifdef SYM_LINUX_PROC_INFO_SUPPORT |
911 | /* |
912 | * Proc file system stuff |
913 | * |
914 | * A read operation returns adapter information. |
915 | * A write operation is a control command. |
916 | * The string is parsed in the driver code and the command is passed |
917 | * to the sym_usercmd() function. |
918 | */ |
919 | |
920 | #ifdef SYM_LINUX_USER_COMMAND_SUPPORT |
921 | |
922 | struct sym_usrcmd { |
923 | u_long target; |
924 | u_long lun; |
925 | u_long data; |
926 | u_long cmd; |
927 | }; |
928 | |
929 | #define UC_SETSYNC 10 |
930 | #define UC_SETTAGS 11 |
931 | #define UC_SETDEBUG 12 |
932 | #define UC_SETWIDE 14 |
933 | #define UC_SETFLAG 15 |
934 | #define UC_SETVERBOSE 17 |
935 | #define UC_RESETDEV 18 |
936 | #define UC_CLEARDEV 19 |
937 | |
938 | static void sym_exec_user_command (struct sym_hcb *np, struct sym_usrcmd *uc) |
939 | { |
940 | struct sym_tcb *tp; |
941 | int t, l; |
942 | |
943 | switch (uc->cmd) { |
944 | case 0: return; |
945 | |
946 | #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT |
947 | case UC_SETDEBUG: |
948 | sym_debug_flags = uc->data; |
949 | break; |
950 | #endif |
951 | case UC_SETVERBOSE: |
952 | np->verbose = uc->data; |
953 | break; |
954 | default: |
955 | /* |
956 | * We assume that other commands apply to targets. |
957 | * This should always be the case and avoid the below |
958 | * 4 lines to be repeated 6 times. |
959 | */ |
960 | for (t = 0; t < SYM_CONF_MAX_TARGET; t++) { |
961 | if (!((uc->target >> t) & 1)) |
962 | continue; |
963 | tp = &np->target[t]; |
964 | if (!tp->nlcb) |
965 | continue; |
966 | |
967 | switch (uc->cmd) { |
968 | |
969 | case UC_SETSYNC: |
970 | if (!uc->data || uc->data >= 255) { |
971 | tp->tgoal.iu = tp->tgoal.dt = |
972 | tp->tgoal.qas = 0; |
973 | tp->tgoal.offset = 0; |
974 | } else if (uc->data <= 9 && np->minsync_dt) { |
975 | if (uc->data < np->minsync_dt) |
976 | uc->data = np->minsync_dt; |
977 | tp->tgoal.iu = tp->tgoal.dt = |
978 | tp->tgoal.qas = 1; |
979 | tp->tgoal.width = 1; |
980 | tp->tgoal.period = uc->data; |
981 | tp->tgoal.offset = np->maxoffs_dt; |
982 | } else { |
983 | if (uc->data < np->minsync) |
984 | uc->data = np->minsync; |
985 | tp->tgoal.iu = tp->tgoal.dt = |
986 | tp->tgoal.qas = 0; |
987 | tp->tgoal.period = uc->data; |
988 | tp->tgoal.offset = np->maxoffs; |
989 | } |
990 | tp->tgoal.check_nego = 1; |
991 | break; |
992 | case UC_SETWIDE: |
993 | tp->tgoal.width = uc->data ? 1 : 0; |
994 | tp->tgoal.check_nego = 1; |
995 | break; |
996 | case UC_SETTAGS: |
997 | for (l = 0; l < SYM_CONF_MAX_LUN; l++) |
998 | sym_tune_dev_queuing(tp, lun: l, reqtags: uc->data); |
999 | break; |
1000 | case UC_RESETDEV: |
1001 | tp->to_reset = 1; |
1002 | np->istat_sem = SEM; |
1003 | OUTB(np, nc_istat, SIGP|SEM); |
1004 | break; |
1005 | case UC_CLEARDEV: |
1006 | for (l = 0; l < SYM_CONF_MAX_LUN; l++) { |
1007 | struct sym_lcb *lp = sym_lp(tp, l); |
1008 | if (lp) lp->to_clear = 1; |
1009 | } |
1010 | np->istat_sem = SEM; |
1011 | OUTB(np, nc_istat, SIGP|SEM); |
1012 | break; |
1013 | case UC_SETFLAG: |
1014 | tp->usrflags = uc->data; |
1015 | break; |
1016 | } |
1017 | } |
1018 | break; |
1019 | } |
1020 | } |
1021 | |
1022 | static int sym_skip_spaces(char *ptr, int len) |
1023 | { |
1024 | int cnt, c; |
1025 | |
1026 | for (cnt = len; cnt > 0 && (c = *ptr++) && isspace(c); cnt--); |
1027 | |
1028 | return (len - cnt); |
1029 | } |
1030 | |
1031 | static int get_int_arg(char *ptr, int len, u_long *pv) |
1032 | { |
1033 | char *end; |
1034 | |
1035 | *pv = simple_strtoul(ptr, &end, 10); |
1036 | return (end - ptr); |
1037 | } |
1038 | |
1039 | static int is_keyword(char *ptr, int len, char *verb) |
1040 | { |
1041 | int verb_len = strlen(verb); |
1042 | |
1043 | if (len >= verb_len && !memcmp(p: verb, q: ptr, size: verb_len)) |
1044 | return verb_len; |
1045 | else |
1046 | return 0; |
1047 | } |
1048 | |
1049 | #define SKIP_SPACES(ptr, len) \ |
1050 | if ((arg_len = sym_skip_spaces(ptr, len)) < 1) \ |
1051 | return -EINVAL; \ |
1052 | ptr += arg_len; len -= arg_len; |
1053 | |
1054 | #define GET_INT_ARG(ptr, len, v) \ |
1055 | if (!(arg_len = get_int_arg(ptr, len, &(v)))) \ |
1056 | return -EINVAL; \ |
1057 | ptr += arg_len; len -= arg_len; |
1058 | |
1059 | |
1060 | /* |
1061 | * Parse a control command |
1062 | */ |
1063 | |
1064 | static int sym_user_command(struct Scsi_Host *shost, char *buffer, int length) |
1065 | { |
1066 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1067 | char *ptr = buffer; |
1068 | int len = length; |
1069 | struct sym_usrcmd cmd, *uc = &cmd; |
1070 | int arg_len; |
1071 | u_long target; |
1072 | |
1073 | memset(uc, 0, sizeof(*uc)); |
1074 | |
1075 | if (len > 0 && ptr[len-1] == '\n') |
1076 | --len; |
1077 | |
1078 | if ((arg_len = is_keyword(ptr, len, verb: "setsync" )) != 0) |
1079 | uc->cmd = UC_SETSYNC; |
1080 | else if ((arg_len = is_keyword(ptr, len, verb: "settags" )) != 0) |
1081 | uc->cmd = UC_SETTAGS; |
1082 | else if ((arg_len = is_keyword(ptr, len, verb: "setverbose" )) != 0) |
1083 | uc->cmd = UC_SETVERBOSE; |
1084 | else if ((arg_len = is_keyword(ptr, len, verb: "setwide" )) != 0) |
1085 | uc->cmd = UC_SETWIDE; |
1086 | #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT |
1087 | else if ((arg_len = is_keyword(ptr, len, verb: "setdebug" )) != 0) |
1088 | uc->cmd = UC_SETDEBUG; |
1089 | #endif |
1090 | else if ((arg_len = is_keyword(ptr, len, verb: "setflag" )) != 0) |
1091 | uc->cmd = UC_SETFLAG; |
1092 | else if ((arg_len = is_keyword(ptr, len, verb: "resetdev" )) != 0) |
1093 | uc->cmd = UC_RESETDEV; |
1094 | else if ((arg_len = is_keyword(ptr, len, verb: "cleardev" )) != 0) |
1095 | uc->cmd = UC_CLEARDEV; |
1096 | else |
1097 | arg_len = 0; |
1098 | |
1099 | #ifdef DEBUG_PROC_INFO |
1100 | printk("sym_user_command: arg_len=%d, cmd=%ld\n" , arg_len, uc->cmd); |
1101 | #endif |
1102 | |
1103 | if (!arg_len) |
1104 | return -EINVAL; |
1105 | ptr += arg_len; len -= arg_len; |
1106 | |
1107 | switch(uc->cmd) { |
1108 | case UC_SETSYNC: |
1109 | case UC_SETTAGS: |
1110 | case UC_SETWIDE: |
1111 | case UC_SETFLAG: |
1112 | case UC_RESETDEV: |
1113 | case UC_CLEARDEV: |
1114 | SKIP_SPACES(ptr, len); |
1115 | if ((arg_len = is_keyword(ptr, len, verb: "all" )) != 0) { |
1116 | ptr += arg_len; len -= arg_len; |
1117 | uc->target = ~0; |
1118 | } else { |
1119 | GET_INT_ARG(ptr, len, target); |
1120 | uc->target = (1<<target); |
1121 | #ifdef DEBUG_PROC_INFO |
1122 | printk("sym_user_command: target=%ld\n" , target); |
1123 | #endif |
1124 | } |
1125 | break; |
1126 | } |
1127 | |
1128 | switch(uc->cmd) { |
1129 | case UC_SETVERBOSE: |
1130 | case UC_SETSYNC: |
1131 | case UC_SETTAGS: |
1132 | case UC_SETWIDE: |
1133 | SKIP_SPACES(ptr, len); |
1134 | GET_INT_ARG(ptr, len, uc->data); |
1135 | #ifdef DEBUG_PROC_INFO |
1136 | printk("sym_user_command: data=%ld\n" , uc->data); |
1137 | #endif |
1138 | break; |
1139 | #ifdef SYM_LINUX_DEBUG_CONTROL_SUPPORT |
1140 | case UC_SETDEBUG: |
1141 | while (len > 0) { |
1142 | SKIP_SPACES(ptr, len); |
1143 | if ((arg_len = is_keyword(ptr, len, verb: "alloc" ))) |
1144 | uc->data |= DEBUG_ALLOC; |
1145 | else if ((arg_len = is_keyword(ptr, len, verb: "phase" ))) |
1146 | uc->data |= DEBUG_PHASE; |
1147 | else if ((arg_len = is_keyword(ptr, len, verb: "queue" ))) |
1148 | uc->data |= DEBUG_QUEUE; |
1149 | else if ((arg_len = is_keyword(ptr, len, verb: "result" ))) |
1150 | uc->data |= DEBUG_RESULT; |
1151 | else if ((arg_len = is_keyword(ptr, len, verb: "scatter" ))) |
1152 | uc->data |= DEBUG_SCATTER; |
1153 | else if ((arg_len = is_keyword(ptr, len, verb: "script" ))) |
1154 | uc->data |= DEBUG_SCRIPT; |
1155 | else if ((arg_len = is_keyword(ptr, len, verb: "tiny" ))) |
1156 | uc->data |= DEBUG_TINY; |
1157 | else if ((arg_len = is_keyword(ptr, len, verb: "timing" ))) |
1158 | uc->data |= DEBUG_TIMING; |
1159 | else if ((arg_len = is_keyword(ptr, len, verb: "nego" ))) |
1160 | uc->data |= DEBUG_NEGO; |
1161 | else if ((arg_len = is_keyword(ptr, len, verb: "tags" ))) |
1162 | uc->data |= DEBUG_TAGS; |
1163 | else if ((arg_len = is_keyword(ptr, len, verb: "pointer" ))) |
1164 | uc->data |= DEBUG_POINTER; |
1165 | else |
1166 | return -EINVAL; |
1167 | ptr += arg_len; len -= arg_len; |
1168 | } |
1169 | #ifdef DEBUG_PROC_INFO |
1170 | printk("sym_user_command: data=%ld\n" , uc->data); |
1171 | #endif |
1172 | break; |
1173 | #endif /* SYM_LINUX_DEBUG_CONTROL_SUPPORT */ |
1174 | case UC_SETFLAG: |
1175 | while (len > 0) { |
1176 | SKIP_SPACES(ptr, len); |
1177 | if ((arg_len = is_keyword(ptr, len, verb: "no_disc" ))) |
1178 | uc->data &= ~SYM_DISC_ENABLED; |
1179 | else |
1180 | return -EINVAL; |
1181 | ptr += arg_len; len -= arg_len; |
1182 | } |
1183 | break; |
1184 | default: |
1185 | break; |
1186 | } |
1187 | |
1188 | if (len) |
1189 | return -EINVAL; |
1190 | else { |
1191 | unsigned long flags; |
1192 | |
1193 | spin_lock_irqsave(shost->host_lock, flags); |
1194 | sym_exec_user_command(np, uc); |
1195 | spin_unlock_irqrestore(lock: shost->host_lock, flags); |
1196 | } |
1197 | return length; |
1198 | } |
1199 | |
1200 | #endif /* SYM_LINUX_USER_COMMAND_SUPPORT */ |
1201 | |
1202 | |
1203 | /* |
1204 | * Copy formatted information into the input buffer. |
1205 | */ |
1206 | static int sym_show_info(struct seq_file *m, struct Scsi_Host *shost) |
1207 | { |
1208 | #ifdef SYM_LINUX_USER_INFO_SUPPORT |
1209 | struct sym_data *sym_data = shost_priv(shost); |
1210 | struct pci_dev *pdev = sym_data->pdev; |
1211 | struct sym_hcb *np = sym_data->ncb; |
1212 | |
1213 | seq_printf(m, fmt: "Chip " NAME53C "%s, device id 0x%x, " |
1214 | "revision id 0x%x\n" , np->s.chip_name, |
1215 | pdev->device, pdev->revision); |
1216 | seq_printf(m, fmt: "At PCI address %s, IRQ %u\n" , |
1217 | pci_name(pdev), pdev->irq); |
1218 | seq_printf(m, fmt: "Min. period factor %d, %s SCSI BUS%s\n" , |
1219 | (int) (np->minsync_dt ? np->minsync_dt : np->minsync), |
1220 | np->maxwide ? "Wide" : "Narrow" , |
1221 | np->minsync_dt ? ", DT capable" : "" ); |
1222 | |
1223 | seq_printf(m, fmt: "Max. started commands %d, " |
1224 | "max. commands per LUN %d\n" , |
1225 | SYM_CONF_MAX_START, SYM_CONF_MAX_TAG); |
1226 | |
1227 | return 0; |
1228 | #else |
1229 | return -EINVAL; |
1230 | #endif /* SYM_LINUX_USER_INFO_SUPPORT */ |
1231 | } |
1232 | |
1233 | #endif /* SYM_LINUX_PROC_INFO_SUPPORT */ |
1234 | |
1235 | /* |
1236 | * Free resources claimed by sym_iomap_device(). Note that |
1237 | * sym_free_resources() should be used instead of this function after calling |
1238 | * sym_attach(). |
1239 | */ |
1240 | static void sym_iounmap_device(struct sym_device *device) |
1241 | { |
1242 | if (device->s.ioaddr) |
1243 | pci_iounmap(dev: device->pdev, device->s.ioaddr); |
1244 | if (device->s.ramaddr) |
1245 | pci_iounmap(dev: device->pdev, device->s.ramaddr); |
1246 | } |
1247 | |
1248 | /* |
1249 | * Free controller resources. |
1250 | */ |
1251 | static void sym_free_resources(struct sym_hcb *np, struct pci_dev *pdev, |
1252 | int do_free_irq) |
1253 | { |
1254 | /* |
1255 | * Free O/S specific resources. |
1256 | */ |
1257 | if (do_free_irq) |
1258 | free_irq(pdev->irq, np->s.host); |
1259 | if (np->s.ioaddr) |
1260 | pci_iounmap(dev: pdev, np->s.ioaddr); |
1261 | if (np->s.ramaddr) |
1262 | pci_iounmap(dev: pdev, np->s.ramaddr); |
1263 | /* |
1264 | * Free O/S independent resources. |
1265 | */ |
1266 | sym_hcb_free(np); |
1267 | |
1268 | sym_mfree_dma(np, sizeof(*np), "HCB" ); |
1269 | } |
1270 | |
1271 | /* |
1272 | * Host attach and initialisations. |
1273 | * |
1274 | * Allocate host data and ncb structure. |
1275 | * Remap MMIO region. |
1276 | * Do chip initialization. |
1277 | * If all is OK, install interrupt handling and |
1278 | * start the timer daemon. |
1279 | */ |
1280 | static struct Scsi_Host *sym_attach(const struct scsi_host_template *tpnt, int unit, |
1281 | struct sym_device *dev) |
1282 | { |
1283 | struct sym_data *sym_data; |
1284 | struct sym_hcb *np = NULL; |
1285 | struct Scsi_Host *shost = NULL; |
1286 | struct pci_dev *pdev = dev->pdev; |
1287 | unsigned long flags; |
1288 | struct sym_fw *fw; |
1289 | int do_free_irq = 0; |
1290 | |
1291 | printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n" , |
1292 | unit, dev->chip.name, pdev->revision, pci_name(pdev), |
1293 | pdev->irq); |
1294 | |
1295 | /* |
1296 | * Get the firmware for this chip. |
1297 | */ |
1298 | fw = sym_find_firmware(chip: &dev->chip); |
1299 | if (!fw) |
1300 | goto attach_failed; |
1301 | |
1302 | shost = scsi_host_alloc(tpnt, sizeof(*sym_data)); |
1303 | if (!shost) |
1304 | goto attach_failed; |
1305 | sym_data = shost_priv(shost); |
1306 | |
1307 | /* |
1308 | * Allocate immediately the host control block, |
1309 | * since we are only expecting to succeed. :) |
1310 | * We keep track in the HCB of all the resources that |
1311 | * are to be released on error. |
1312 | */ |
1313 | np = __sym_calloc_dma(dev_dmat: &pdev->dev, size: sizeof(*np), name: "HCB" ); |
1314 | if (!np) |
1315 | goto attach_failed; |
1316 | np->bus_dmat = &pdev->dev; /* Result in 1 DMA pool per HBA */ |
1317 | sym_data->ncb = np; |
1318 | sym_data->pdev = pdev; |
1319 | np->s.host = shost; |
1320 | |
1321 | pci_set_drvdata(pdev, data: shost); |
1322 | |
1323 | /* |
1324 | * Copy some useful infos to the HCB. |
1325 | */ |
1326 | np->hcb_ba = vtobus(np); |
1327 | np->verbose = sym_driver_setup.verbose; |
1328 | np->s.unit = unit; |
1329 | np->features = dev->chip.features; |
1330 | np->clock_divn = dev->chip.nr_divisor; |
1331 | np->maxoffs = dev->chip.offset_max; |
1332 | np->maxburst = dev->chip.burst_max; |
1333 | np->myaddr = dev->host_id; |
1334 | np->mmio_ba = (u32)dev->mmio_base; |
1335 | np->ram_ba = (u32)dev->ram_base; |
1336 | np->s.ioaddr = dev->s.ioaddr; |
1337 | np->s.ramaddr = dev->s.ramaddr; |
1338 | |
1339 | /* |
1340 | * Edit its name. |
1341 | */ |
1342 | strscpy(p: np->s.chip_name, q: dev->chip.name, size: sizeof(np->s.chip_name)); |
1343 | sprintf(buf: np->s.inst_name, fmt: "sym%d" , np->s.unit); |
1344 | |
1345 | if ((SYM_CONF_DMA_ADDRESSING_MODE > 0) && (np->features & FE_DAC) && |
1346 | !dma_set_mask(dev: &pdev->dev, DMA_DAC_MASK)) { |
1347 | set_dac(np); |
1348 | } else if (dma_set_mask(dev: &pdev->dev, DMA_BIT_MASK(32))) { |
1349 | printf_warning("%s: No suitable DMA available\n" , sym_name(np)); |
1350 | goto attach_failed; |
1351 | } |
1352 | |
1353 | if (sym_hcb_attach(shost, fw, nvram: dev->nvram)) |
1354 | goto attach_failed; |
1355 | |
1356 | /* |
1357 | * Install the interrupt handler. |
1358 | * If we synchonize the C code with SCRIPTS on interrupt, |
1359 | * we do not want to share the INTR line at all. |
1360 | */ |
1361 | if (request_irq(irq: pdev->irq, handler: sym53c8xx_intr, IRQF_SHARED, NAME53C8XX, |
1362 | dev: shost)) { |
1363 | printf_err("%s: request irq %u failure\n" , |
1364 | sym_name(np), pdev->irq); |
1365 | goto attach_failed; |
1366 | } |
1367 | do_free_irq = 1; |
1368 | |
1369 | /* |
1370 | * After SCSI devices have been opened, we cannot |
1371 | * reset the bus safely, so we do it here. |
1372 | */ |
1373 | spin_lock_irqsave(shost->host_lock, flags); |
1374 | if (sym_reset_scsi_bus(np, enab_int: 0)) |
1375 | goto reset_failed; |
1376 | |
1377 | /* |
1378 | * Start the SCRIPTS. |
1379 | */ |
1380 | sym_start_up(shost, reason: 1); |
1381 | |
1382 | /* |
1383 | * Start the timer daemon |
1384 | */ |
1385 | timer_setup(&np->s.timer, sym53c8xx_timer, 0); |
1386 | np->s.lasttime=0; |
1387 | sym_timer (np); |
1388 | |
1389 | /* |
1390 | * Fill Linux host instance structure |
1391 | * and return success. |
1392 | */ |
1393 | shost->max_channel = 0; |
1394 | shost->this_id = np->myaddr; |
1395 | shost->max_id = np->maxwide ? 16 : 8; |
1396 | shost->max_lun = SYM_CONF_MAX_LUN; |
1397 | shost->unique_id = pci_resource_start(pdev, 0); |
1398 | shost->cmd_per_lun = SYM_CONF_MAX_TAG; |
1399 | shost->can_queue = (SYM_CONF_MAX_START-2); |
1400 | shost->sg_tablesize = SYM_CONF_MAX_SG; |
1401 | shost->max_cmd_len = 16; |
1402 | BUG_ON(sym2_transport_template == NULL); |
1403 | shost->transportt = sym2_transport_template; |
1404 | |
1405 | /* 53c896 rev 1 errata: DMA may not cross 16MB boundary */ |
1406 | if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 2) |
1407 | shost->dma_boundary = 0xFFFFFF; |
1408 | |
1409 | spin_unlock_irqrestore(lock: shost->host_lock, flags); |
1410 | |
1411 | return shost; |
1412 | |
1413 | reset_failed: |
1414 | printf_err("%s: FATAL ERROR: CHECK SCSI BUS - CABLES, " |
1415 | "TERMINATION, DEVICE POWER etc.!\n" , sym_name(np)); |
1416 | spin_unlock_irqrestore(lock: shost->host_lock, flags); |
1417 | attach_failed: |
1418 | printf_info("sym%d: giving up ...\n" , unit); |
1419 | if (np) |
1420 | sym_free_resources(np, pdev, do_free_irq); |
1421 | else |
1422 | sym_iounmap_device(device: dev); |
1423 | if (shost) |
1424 | scsi_host_put(t: shost); |
1425 | |
1426 | return NULL; |
1427 | } |
1428 | |
1429 | |
1430 | /* |
1431 | * Detect and try to read SYMBIOS and TEKRAM NVRAM. |
1432 | */ |
1433 | #if SYM_CONF_NVRAM_SUPPORT |
1434 | static void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp) |
1435 | { |
1436 | devp->nvram = nvp; |
1437 | nvp->type = 0; |
1438 | |
1439 | sym_read_nvram(np: devp, nvp); |
1440 | } |
1441 | #else |
1442 | static inline void sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp) |
1443 | { |
1444 | } |
1445 | #endif /* SYM_CONF_NVRAM_SUPPORT */ |
1446 | |
1447 | static int sym_check_supported(struct sym_device *device) |
1448 | { |
1449 | struct sym_chip *chip; |
1450 | struct pci_dev *pdev = device->pdev; |
1451 | unsigned long io_port = pci_resource_start(pdev, 0); |
1452 | int i; |
1453 | |
1454 | /* |
1455 | * If user excluded this chip, do not initialize it. |
1456 | * I hate this code so much. Must kill it. |
1457 | */ |
1458 | if (io_port) { |
1459 | for (i = 0 ; i < 8 ; i++) { |
1460 | if (sym_driver_setup.excludes[i] == io_port) |
1461 | return -ENODEV; |
1462 | } |
1463 | } |
1464 | |
1465 | /* |
1466 | * Check if the chip is supported. Then copy the chip description |
1467 | * to our device structure so we can make it match the actual device |
1468 | * and options. |
1469 | */ |
1470 | chip = sym_lookup_chip_table(device_id: pdev->device, revision: pdev->revision); |
1471 | if (!chip) { |
1472 | dev_info(&pdev->dev, "device not supported\n" ); |
1473 | return -ENODEV; |
1474 | } |
1475 | memcpy(&device->chip, chip, sizeof(device->chip)); |
1476 | |
1477 | return 0; |
1478 | } |
1479 | |
1480 | /* |
1481 | * Ignore Symbios chips controlled by various RAID controllers. |
1482 | * These controllers set value 0x52414944 at RAM end - 16. |
1483 | */ |
1484 | static int sym_check_raid(struct sym_device *device) |
1485 | { |
1486 | unsigned int ram_size, ram_val; |
1487 | |
1488 | if (!device->s.ramaddr) |
1489 | return 0; |
1490 | |
1491 | if (device->chip.features & FE_RAM8K) |
1492 | ram_size = 8192; |
1493 | else |
1494 | ram_size = 4096; |
1495 | |
1496 | ram_val = readl(addr: device->s.ramaddr + ram_size - 16); |
1497 | if (ram_val != 0x52414944) |
1498 | return 0; |
1499 | |
1500 | dev_info(&device->pdev->dev, |
1501 | "not initializing, driven by RAID controller.\n" ); |
1502 | return -ENODEV; |
1503 | } |
1504 | |
1505 | static int sym_set_workarounds(struct sym_device *device) |
1506 | { |
1507 | struct sym_chip *chip = &device->chip; |
1508 | struct pci_dev *pdev = device->pdev; |
1509 | u_short status_reg; |
1510 | |
1511 | /* |
1512 | * (ITEM 12 of a DEL about the 896 I haven't yet). |
1513 | * We must ensure the chip will use WRITE AND INVALIDATE. |
1514 | * The revision number limit is for now arbitrary. |
1515 | */ |
1516 | if (pdev->device == PCI_DEVICE_ID_NCR_53C896 && pdev->revision < 0x4) { |
1517 | chip->features |= (FE_WRIE | FE_CLSE); |
1518 | } |
1519 | |
1520 | /* If the chip can do Memory Write Invalidate, enable it */ |
1521 | if (chip->features & FE_WRIE) { |
1522 | if (pci_set_mwi(dev: pdev)) |
1523 | return -ENODEV; |
1524 | } |
1525 | |
1526 | /* |
1527 | * Work around for errant bit in 895A. The 66Mhz |
1528 | * capable bit is set erroneously. Clear this bit. |
1529 | * (Item 1 DEL 533) |
1530 | * |
1531 | * Make sure Config space and Features agree. |
1532 | * |
1533 | * Recall: writes are not normal to status register - |
1534 | * write a 1 to clear and a 0 to leave unchanged. |
1535 | * Can only reset bits. |
1536 | */ |
1537 | pci_read_config_word(dev: pdev, PCI_STATUS, val: &status_reg); |
1538 | if (chip->features & FE_66MHZ) { |
1539 | if (!(status_reg & PCI_STATUS_66MHZ)) |
1540 | chip->features &= ~FE_66MHZ; |
1541 | } else { |
1542 | if (status_reg & PCI_STATUS_66MHZ) { |
1543 | status_reg = PCI_STATUS_66MHZ; |
1544 | pci_write_config_word(dev: pdev, PCI_STATUS, val: status_reg); |
1545 | pci_read_config_word(dev: pdev, PCI_STATUS, val: &status_reg); |
1546 | } |
1547 | } |
1548 | |
1549 | return 0; |
1550 | } |
1551 | |
1552 | /* |
1553 | * Map HBA registers and on-chip SRAM (if present). |
1554 | */ |
1555 | static int sym_iomap_device(struct sym_device *device) |
1556 | { |
1557 | struct pci_dev *pdev = device->pdev; |
1558 | struct pci_bus_region bus_addr; |
1559 | int i = 2; |
1560 | |
1561 | pcibios_resource_to_bus(bus: pdev->bus, region: &bus_addr, res: &pdev->resource[1]); |
1562 | device->mmio_base = bus_addr.start; |
1563 | |
1564 | if (device->chip.features & FE_RAM) { |
1565 | /* |
1566 | * If the BAR is 64-bit, resource 2 will be occupied by the |
1567 | * upper 32 bits |
1568 | */ |
1569 | if (!pdev->resource[i].flags) |
1570 | i++; |
1571 | pcibios_resource_to_bus(bus: pdev->bus, region: &bus_addr, |
1572 | res: &pdev->resource[i]); |
1573 | device->ram_base = bus_addr.start; |
1574 | } |
1575 | |
1576 | #ifdef CONFIG_SCSI_SYM53C8XX_MMIO |
1577 | if (device->mmio_base) |
1578 | device->s.ioaddr = pci_iomap(dev: pdev, bar: 1, |
1579 | pci_resource_len(pdev, 1)); |
1580 | #endif |
1581 | if (!device->s.ioaddr) |
1582 | device->s.ioaddr = pci_iomap(dev: pdev, bar: 0, |
1583 | pci_resource_len(pdev, 0)); |
1584 | if (!device->s.ioaddr) { |
1585 | dev_err(&pdev->dev, "could not map registers; giving up.\n" ); |
1586 | return -EIO; |
1587 | } |
1588 | if (device->ram_base) { |
1589 | device->s.ramaddr = pci_iomap(dev: pdev, bar: i, |
1590 | pci_resource_len(pdev, i)); |
1591 | if (!device->s.ramaddr) { |
1592 | dev_warn(&pdev->dev, |
1593 | "could not map SRAM; continuing anyway.\n" ); |
1594 | device->ram_base = 0; |
1595 | } |
1596 | } |
1597 | |
1598 | return 0; |
1599 | } |
1600 | |
1601 | /* |
1602 | * The NCR PQS and PDS cards are constructed as a DEC bridge |
1603 | * behind which sits a proprietary NCR memory controller and |
1604 | * either four or two 53c875s as separate devices. We can tell |
1605 | * if an 875 is part of a PQS/PDS or not since if it is, it will |
1606 | * be on the same bus as the memory controller. In its usual |
1607 | * mode of operation, the 875s are slaved to the memory |
1608 | * controller for all transfers. To operate with the Linux |
1609 | * driver, the memory controller is disabled and the 875s |
1610 | * freed to function independently. The only wrinkle is that |
1611 | * the preset SCSI ID (which may be zero) must be read in from |
1612 | * a special configuration space register of the 875. |
1613 | */ |
1614 | static void sym_config_pqs(struct pci_dev *pdev, struct sym_device *sym_dev) |
1615 | { |
1616 | int slot; |
1617 | u8 tmp; |
1618 | |
1619 | for (slot = 0; slot < 256; slot++) { |
1620 | struct pci_dev *memc = pci_get_slot(bus: pdev->bus, devfn: slot); |
1621 | |
1622 | if (!memc || memc->vendor != 0x101a || memc->device == 0x0009) { |
1623 | pci_dev_put(dev: memc); |
1624 | continue; |
1625 | } |
1626 | |
1627 | /* bit 1: allow individual 875 configuration */ |
1628 | pci_read_config_byte(dev: memc, where: 0x44, val: &tmp); |
1629 | if ((tmp & 0x2) == 0) { |
1630 | tmp |= 0x2; |
1631 | pci_write_config_byte(dev: memc, where: 0x44, val: tmp); |
1632 | } |
1633 | |
1634 | /* bit 2: drive individual 875 interrupts to the bus */ |
1635 | pci_read_config_byte(dev: memc, where: 0x45, val: &tmp); |
1636 | if ((tmp & 0x4) == 0) { |
1637 | tmp |= 0x4; |
1638 | pci_write_config_byte(dev: memc, where: 0x45, val: tmp); |
1639 | } |
1640 | |
1641 | pci_dev_put(dev: memc); |
1642 | break; |
1643 | } |
1644 | |
1645 | pci_read_config_byte(dev: pdev, where: 0x84, val: &tmp); |
1646 | sym_dev->host_id = tmp; |
1647 | } |
1648 | |
1649 | /* |
1650 | * Called before unloading the module. |
1651 | * Detach the host. |
1652 | * We have to free resources and halt the NCR chip. |
1653 | */ |
1654 | static int sym_detach(struct Scsi_Host *shost, struct pci_dev *pdev) |
1655 | { |
1656 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1657 | printk("%s: detaching ...\n" , sym_name(np)); |
1658 | |
1659 | del_timer_sync(timer: &np->s.timer); |
1660 | |
1661 | /* |
1662 | * Reset NCR chip. |
1663 | * We should use sym_soft_reset(), but we don't want to do |
1664 | * so, since we may not be safe if interrupts occur. |
1665 | */ |
1666 | printk("%s: resetting chip\n" , sym_name(np)); |
1667 | OUTB(np, nc_istat, SRST); |
1668 | INB(np, nc_mbox1); |
1669 | udelay(10); |
1670 | OUTB(np, nc_istat, 0); |
1671 | |
1672 | sym_free_resources(np, pdev, do_free_irq: 1); |
1673 | scsi_host_put(t: shost); |
1674 | |
1675 | return 1; |
1676 | } |
1677 | |
1678 | /* |
1679 | * Driver host template. |
1680 | */ |
1681 | static const struct scsi_host_template sym2_template = { |
1682 | .module = THIS_MODULE, |
1683 | .name = "sym53c8xx" , |
1684 | .info = sym53c8xx_info, |
1685 | .cmd_size = sizeof(struct sym_ucmd), |
1686 | .queuecommand = sym53c8xx_queue_command, |
1687 | .slave_alloc = sym53c8xx_slave_alloc, |
1688 | .slave_configure = sym53c8xx_slave_configure, |
1689 | .slave_destroy = sym53c8xx_slave_destroy, |
1690 | .eh_abort_handler = sym53c8xx_eh_abort_handler, |
1691 | .eh_target_reset_handler = sym53c8xx_eh_target_reset_handler, |
1692 | .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, |
1693 | .eh_host_reset_handler = sym53c8xx_eh_host_reset_handler, |
1694 | .this_id = 7, |
1695 | .max_sectors = 0xFFFF, |
1696 | #ifdef SYM_LINUX_PROC_INFO_SUPPORT |
1697 | .show_info = sym_show_info, |
1698 | #ifdef SYM_LINUX_USER_COMMAND_SUPPORT |
1699 | .write_info = sym_user_command, |
1700 | #endif |
1701 | .proc_name = NAME53C8XX, |
1702 | #endif |
1703 | }; |
1704 | |
1705 | static int attach_count; |
1706 | |
1707 | static int sym2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
1708 | { |
1709 | struct sym_device sym_dev; |
1710 | struct sym_nvram nvram; |
1711 | struct Scsi_Host *shost; |
1712 | int do_iounmap = 0; |
1713 | int do_disable_device = 1; |
1714 | |
1715 | memset(&sym_dev, 0, sizeof(sym_dev)); |
1716 | memset(&nvram, 0, sizeof(nvram)); |
1717 | sym_dev.pdev = pdev; |
1718 | sym_dev.host_id = SYM_SETUP_HOST_ID; |
1719 | |
1720 | if (pci_enable_device(dev: pdev)) |
1721 | goto leave; |
1722 | |
1723 | pci_set_master(dev: pdev); |
1724 | |
1725 | if (pci_request_regions(pdev, NAME53C8XX)) |
1726 | goto disable; |
1727 | |
1728 | if (sym_check_supported(device: &sym_dev)) |
1729 | goto free; |
1730 | |
1731 | if (sym_iomap_device(device: &sym_dev)) |
1732 | goto free; |
1733 | do_iounmap = 1; |
1734 | |
1735 | if (sym_check_raid(device: &sym_dev)) { |
1736 | do_disable_device = 0; /* Don't disable the device */ |
1737 | goto free; |
1738 | } |
1739 | |
1740 | if (sym_set_workarounds(device: &sym_dev)) |
1741 | goto free; |
1742 | |
1743 | sym_config_pqs(pdev, sym_dev: &sym_dev); |
1744 | |
1745 | sym_get_nvram(devp: &sym_dev, nvp: &nvram); |
1746 | |
1747 | do_iounmap = 0; /* Don't sym_iounmap_device() after sym_attach(). */ |
1748 | shost = sym_attach(tpnt: &sym2_template, unit: attach_count, dev: &sym_dev); |
1749 | if (!shost) |
1750 | goto free; |
1751 | |
1752 | if (scsi_add_host(host: shost, dev: &pdev->dev)) |
1753 | goto detach; |
1754 | scsi_scan_host(shost); |
1755 | |
1756 | attach_count++; |
1757 | |
1758 | return 0; |
1759 | |
1760 | detach: |
1761 | sym_detach(shost: pci_get_drvdata(pdev), pdev); |
1762 | free: |
1763 | if (do_iounmap) |
1764 | sym_iounmap_device(device: &sym_dev); |
1765 | pci_release_regions(pdev); |
1766 | disable: |
1767 | if (do_disable_device) |
1768 | pci_disable_device(dev: pdev); |
1769 | leave: |
1770 | return -ENODEV; |
1771 | } |
1772 | |
1773 | static void sym2_remove(struct pci_dev *pdev) |
1774 | { |
1775 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
1776 | |
1777 | scsi_remove_host(shost); |
1778 | sym_detach(shost, pdev); |
1779 | pci_release_regions(pdev); |
1780 | pci_disable_device(dev: pdev); |
1781 | |
1782 | attach_count--; |
1783 | } |
1784 | |
1785 | /** |
1786 | * sym2_io_error_detected() - called when PCI error is detected |
1787 | * @pdev: pointer to PCI device |
1788 | * @state: current state of the PCI slot |
1789 | */ |
1790 | static pci_ers_result_t sym2_io_error_detected(struct pci_dev *pdev, |
1791 | pci_channel_state_t state) |
1792 | { |
1793 | /* If slot is permanently frozen, turn everything off */ |
1794 | if (state == pci_channel_io_perm_failure) { |
1795 | sym2_remove(pdev); |
1796 | return PCI_ERS_RESULT_DISCONNECT; |
1797 | } |
1798 | |
1799 | disable_irq(irq: pdev->irq); |
1800 | pci_disable_device(dev: pdev); |
1801 | |
1802 | /* Request that MMIO be enabled, so register dump can be taken. */ |
1803 | return PCI_ERS_RESULT_CAN_RECOVER; |
1804 | } |
1805 | |
1806 | /** |
1807 | * sym2_io_slot_dump - Enable MMIO and dump debug registers |
1808 | * @pdev: pointer to PCI device |
1809 | */ |
1810 | static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) |
1811 | { |
1812 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
1813 | |
1814 | sym_dump_registers(shost); |
1815 | |
1816 | /* Request a slot reset. */ |
1817 | return PCI_ERS_RESULT_NEED_RESET; |
1818 | } |
1819 | |
1820 | /** |
1821 | * sym2_reset_workarounds - hardware-specific work-arounds |
1822 | * @pdev: pointer to PCI device |
1823 | * |
1824 | * This routine is similar to sym_set_workarounds(), except |
1825 | * that, at this point, we already know that the device was |
1826 | * successfully initialized at least once before, and so most |
1827 | * of the steps taken there are un-needed here. |
1828 | */ |
1829 | static void sym2_reset_workarounds(struct pci_dev *pdev) |
1830 | { |
1831 | u_short status_reg; |
1832 | struct sym_chip *chip; |
1833 | |
1834 | chip = sym_lookup_chip_table(device_id: pdev->device, revision: pdev->revision); |
1835 | |
1836 | /* Work around for errant bit in 895A, in a fashion |
1837 | * similar to what is done in sym_set_workarounds(). |
1838 | */ |
1839 | pci_read_config_word(dev: pdev, PCI_STATUS, val: &status_reg); |
1840 | if (!(chip->features & FE_66MHZ) && (status_reg & PCI_STATUS_66MHZ)) { |
1841 | status_reg = PCI_STATUS_66MHZ; |
1842 | pci_write_config_word(dev: pdev, PCI_STATUS, val: status_reg); |
1843 | pci_read_config_word(dev: pdev, PCI_STATUS, val: &status_reg); |
1844 | } |
1845 | } |
1846 | |
1847 | /** |
1848 | * sym2_io_slot_reset() - called when the pci bus has been reset. |
1849 | * @pdev: pointer to PCI device |
1850 | * |
1851 | * Restart the card from scratch. |
1852 | */ |
1853 | static pci_ers_result_t sym2_io_slot_reset(struct pci_dev *pdev) |
1854 | { |
1855 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
1856 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1857 | |
1858 | printk(KERN_INFO "%s: recovering from a PCI slot reset\n" , |
1859 | sym_name(np)); |
1860 | |
1861 | if (pci_enable_device(dev: pdev)) { |
1862 | printk(KERN_ERR "%s: Unable to enable after PCI reset\n" , |
1863 | sym_name(np)); |
1864 | return PCI_ERS_RESULT_DISCONNECT; |
1865 | } |
1866 | |
1867 | pci_set_master(dev: pdev); |
1868 | enable_irq(irq: pdev->irq); |
1869 | |
1870 | /* If the chip can do Memory Write Invalidate, enable it */ |
1871 | if (np->features & FE_WRIE) { |
1872 | if (pci_set_mwi(dev: pdev)) |
1873 | return PCI_ERS_RESULT_DISCONNECT; |
1874 | } |
1875 | |
1876 | /* Perform work-arounds, analogous to sym_set_workarounds() */ |
1877 | sym2_reset_workarounds(pdev); |
1878 | |
1879 | /* Perform host reset only on one instance of the card */ |
1880 | if (PCI_FUNC(pdev->devfn) == 0) { |
1881 | if (sym_reset_scsi_bus(np, enab_int: 0)) { |
1882 | printk(KERN_ERR "%s: Unable to reset scsi host\n" , |
1883 | sym_name(np)); |
1884 | return PCI_ERS_RESULT_DISCONNECT; |
1885 | } |
1886 | sym_start_up(shost, reason: 1); |
1887 | } |
1888 | |
1889 | return PCI_ERS_RESULT_RECOVERED; |
1890 | } |
1891 | |
1892 | /** |
1893 | * sym2_io_resume() - resume normal ops after PCI reset |
1894 | * @pdev: pointer to PCI device |
1895 | * |
1896 | * Called when the error recovery driver tells us that its |
1897 | * OK to resume normal operation. Use completion to allow |
1898 | * halted scsi ops to resume. |
1899 | */ |
1900 | static void sym2_io_resume(struct pci_dev *pdev) |
1901 | { |
1902 | struct Scsi_Host *shost = pci_get_drvdata(pdev); |
1903 | struct sym_data *sym_data = shost_priv(shost); |
1904 | |
1905 | spin_lock_irq(lock: shost->host_lock); |
1906 | if (sym_data->io_reset) |
1907 | complete(sym_data->io_reset); |
1908 | spin_unlock_irq(lock: shost->host_lock); |
1909 | } |
1910 | |
1911 | static void sym2_get_signalling(struct Scsi_Host *shost) |
1912 | { |
1913 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1914 | enum spi_signal_type type; |
1915 | |
1916 | switch (np->scsi_mode) { |
1917 | case SMODE_SE: |
1918 | type = SPI_SIGNAL_SE; |
1919 | break; |
1920 | case SMODE_LVD: |
1921 | type = SPI_SIGNAL_LVD; |
1922 | break; |
1923 | case SMODE_HVD: |
1924 | type = SPI_SIGNAL_HVD; |
1925 | break; |
1926 | default: |
1927 | type = SPI_SIGNAL_UNKNOWN; |
1928 | break; |
1929 | } |
1930 | spi_signalling(shost) = type; |
1931 | } |
1932 | |
1933 | static void sym2_set_offset(struct scsi_target *starget, int offset) |
1934 | { |
1935 | struct Scsi_Host *shost = dev_to_shost(dev: starget->dev.parent); |
1936 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1937 | struct sym_tcb *tp = &np->target[starget->id]; |
1938 | |
1939 | tp->tgoal.offset = offset; |
1940 | tp->tgoal.check_nego = 1; |
1941 | } |
1942 | |
1943 | static void sym2_set_period(struct scsi_target *starget, int period) |
1944 | { |
1945 | struct Scsi_Host *shost = dev_to_shost(dev: starget->dev.parent); |
1946 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1947 | struct sym_tcb *tp = &np->target[starget->id]; |
1948 | |
1949 | /* have to have DT for these transfers, but DT will also |
1950 | * set width, so check that this is allowed */ |
1951 | if (period <= np->minsync && spi_width(starget)) |
1952 | tp->tgoal.dt = 1; |
1953 | |
1954 | tp->tgoal.period = period; |
1955 | tp->tgoal.check_nego = 1; |
1956 | } |
1957 | |
1958 | static void sym2_set_width(struct scsi_target *starget, int width) |
1959 | { |
1960 | struct Scsi_Host *shost = dev_to_shost(dev: starget->dev.parent); |
1961 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1962 | struct sym_tcb *tp = &np->target[starget->id]; |
1963 | |
1964 | /* It is illegal to have DT set on narrow transfers. If DT is |
1965 | * clear, we must also clear IU and QAS. */ |
1966 | if (width == 0) |
1967 | tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0; |
1968 | |
1969 | tp->tgoal.width = width; |
1970 | tp->tgoal.check_nego = 1; |
1971 | } |
1972 | |
1973 | static void sym2_set_dt(struct scsi_target *starget, int dt) |
1974 | { |
1975 | struct Scsi_Host *shost = dev_to_shost(dev: starget->dev.parent); |
1976 | struct sym_hcb *np = sym_get_hcb(host: shost); |
1977 | struct sym_tcb *tp = &np->target[starget->id]; |
1978 | |
1979 | /* We must clear QAS and IU if DT is clear */ |
1980 | if (dt) |
1981 | tp->tgoal.dt = 1; |
1982 | else |
1983 | tp->tgoal.iu = tp->tgoal.dt = tp->tgoal.qas = 0; |
1984 | tp->tgoal.check_nego = 1; |
1985 | } |
1986 | |
1987 | #if 0 |
1988 | static void sym2_set_iu(struct scsi_target *starget, int iu) |
1989 | { |
1990 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
1991 | struct sym_hcb *np = sym_get_hcb(shost); |
1992 | struct sym_tcb *tp = &np->target[starget->id]; |
1993 | |
1994 | if (iu) |
1995 | tp->tgoal.iu = tp->tgoal.dt = 1; |
1996 | else |
1997 | tp->tgoal.iu = 0; |
1998 | tp->tgoal.check_nego = 1; |
1999 | } |
2000 | |
2001 | static void sym2_set_qas(struct scsi_target *starget, int qas) |
2002 | { |
2003 | struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); |
2004 | struct sym_hcb *np = sym_get_hcb(shost); |
2005 | struct sym_tcb *tp = &np->target[starget->id]; |
2006 | |
2007 | if (qas) |
2008 | tp->tgoal.dt = tp->tgoal.qas = 1; |
2009 | else |
2010 | tp->tgoal.qas = 0; |
2011 | tp->tgoal.check_nego = 1; |
2012 | } |
2013 | #endif |
2014 | |
2015 | static struct spi_function_template sym2_transport_functions = { |
2016 | .set_offset = sym2_set_offset, |
2017 | .show_offset = 1, |
2018 | .set_period = sym2_set_period, |
2019 | .show_period = 1, |
2020 | .set_width = sym2_set_width, |
2021 | .show_width = 1, |
2022 | .set_dt = sym2_set_dt, |
2023 | .show_dt = 1, |
2024 | #if 0 |
2025 | .set_iu = sym2_set_iu, |
2026 | .show_iu = 1, |
2027 | .set_qas = sym2_set_qas, |
2028 | .show_qas = 1, |
2029 | #endif |
2030 | .get_signalling = sym2_get_signalling, |
2031 | }; |
2032 | |
2033 | static struct pci_device_id sym2_id_table[] = { |
2034 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C810, |
2035 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2036 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C820, |
2037 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */ |
2038 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C825, |
2039 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2040 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C815, |
2041 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2042 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C810AP, |
2043 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, /* new */ |
2044 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C860, |
2045 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2046 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1510, |
2047 | PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, |
2048 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C896, |
2049 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2050 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C895, |
2051 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2052 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C885, |
2053 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2054 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875, |
2055 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2056 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C1510, |
2057 | PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SCSI<<8, 0xffff00, 0UL }, /* new */ |
2058 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C895A, |
2059 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2060 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C875A, |
2061 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2062 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_33, |
2063 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2064 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_53C1010_66, |
2065 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2066 | { PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_NCR_53C875J, |
2067 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, |
2068 | { 0, } |
2069 | }; |
2070 | |
2071 | MODULE_DEVICE_TABLE(pci, sym2_id_table); |
2072 | |
2073 | static const struct pci_error_handlers sym2_err_handler = { |
2074 | .error_detected = sym2_io_error_detected, |
2075 | .mmio_enabled = sym2_io_slot_dump, |
2076 | .slot_reset = sym2_io_slot_reset, |
2077 | .resume = sym2_io_resume, |
2078 | }; |
2079 | |
2080 | static struct pci_driver sym2_driver = { |
2081 | .name = NAME53C8XX, |
2082 | .id_table = sym2_id_table, |
2083 | .probe = sym2_probe, |
2084 | .remove = sym2_remove, |
2085 | .err_handler = &sym2_err_handler, |
2086 | }; |
2087 | |
2088 | static int __init sym2_init(void) |
2089 | { |
2090 | int error; |
2091 | |
2092 | sym2_setup_params(); |
2093 | sym2_transport_template = spi_attach_transport(&sym2_transport_functions); |
2094 | if (!sym2_transport_template) |
2095 | return -ENODEV; |
2096 | |
2097 | error = pci_register_driver(&sym2_driver); |
2098 | if (error) |
2099 | spi_release_transport(sym2_transport_template); |
2100 | return error; |
2101 | } |
2102 | |
2103 | static void __exit sym2_exit(void) |
2104 | { |
2105 | pci_unregister_driver(dev: &sym2_driver); |
2106 | spi_release_transport(sym2_transport_template); |
2107 | } |
2108 | |
2109 | module_init(sym2_init); |
2110 | module_exit(sym2_exit); |
2111 | |