| 1 | // SPDX-License-Identifier: GPL-2.0-only |
|---|---|
| 2 | /* |
| 3 | * These are various utility functions of the scheduler, |
| 4 | * built in a single compilation unit for build efficiency reasons. |
| 5 | * |
| 6 | * ( Incidentally, the size of the compilation unit is roughly |
| 7 | * comparable to core.c, fair.c, smp.c and policy.c, the other |
| 8 | * big compilation units. This helps balance build time, while |
| 9 | * coalescing source files to amortize header inclusion |
| 10 | * cost. ) |
| 11 | */ |
| 12 | #include <linux/sched/clock.h> |
| 13 | #include <linux/sched/cputime.h> |
| 14 | #include <linux/sched/debug.h> |
| 15 | #include <linux/sched/isolation.h> |
| 16 | #include <linux/sched/loadavg.h> |
| 17 | #include <linux/sched/nohz.h> |
| 18 | #include <linux/sched/mm.h> |
| 19 | #include <linux/sched/rseq_api.h> |
| 20 | #include <linux/sched/task_stack.h> |
| 21 | |
| 22 | #include <linux/cpufreq.h> |
| 23 | #include <linux/cpumask_api.h> |
| 24 | #include <linux/cpuset.h> |
| 25 | #include <linux/ctype.h> |
| 26 | #include <linux/debugfs.h> |
| 27 | #include <linux/energy_model.h> |
| 28 | #include <linux/hashtable_api.h> |
| 29 | #include <linux/irq.h> |
| 30 | #include <linux/kobject_api.h> |
| 31 | #include <linux/membarrier.h> |
| 32 | #include <linux/mempolicy.h> |
| 33 | #include <linux/nmi.h> |
| 34 | #include <linux/nospec.h> |
| 35 | #include <linux/proc_fs.h> |
| 36 | #include <linux/psi.h> |
| 37 | #include <linux/ptrace_api.h> |
| 38 | #include <linux/sched_clock.h> |
| 39 | #include <linux/security.h> |
| 40 | #include <linux/spinlock_api.h> |
| 41 | #include <linux/swait_api.h> |
| 42 | #include <linux/timex.h> |
| 43 | #include <linux/utsname.h> |
| 44 | #include <linux/wait_api.h> |
| 45 | #include <linux/workqueue_api.h> |
| 46 | |
| 47 | #include <uapi/linux/prctl.h> |
| 48 | #include <uapi/linux/sched/types.h> |
| 49 | |
| 50 | #include <asm/switch_to.h> |
| 51 | |
| 52 | #include "sched.h" |
| 53 | #include "sched-pelt.h" |
| 54 | #include "stats.h" |
| 55 | #include "autogroup.h" |
| 56 | |
| 57 | #include "clock.c" |
| 58 | |
| 59 | #ifdef CONFIG_CGROUP_CPUACCT |
| 60 | # include "cpuacct.c" |
| 61 | #endif |
| 62 | |
| 63 | #ifdef CONFIG_CPU_FREQ |
| 64 | # include "cpufreq.c" |
| 65 | #endif |
| 66 | |
| 67 | #ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL |
| 68 | # include "cpufreq_schedutil.c" |
| 69 | #endif |
| 70 | |
| 71 | #ifdef CONFIG_SCHED_DEBUG |
| 72 | # include "debug.c" |
| 73 | #endif |
| 74 | |
| 75 | #ifdef CONFIG_SCHEDSTATS |
| 76 | # include "stats.c" |
| 77 | #endif |
| 78 | |
| 79 | #include "loadavg.c" |
| 80 | #include "completion.c" |
| 81 | #include "swait.c" |
| 82 | #include "wait_bit.c" |
| 83 | #include "wait.c" |
| 84 | |
| 85 | #ifdef CONFIG_SMP |
| 86 | # include "cpupri.c" |
| 87 | # include "stop_task.c" |
| 88 | # include "topology.c" |
| 89 | #endif |
| 90 | |
| 91 | #ifdef CONFIG_SCHED_CORE |
| 92 | # include "core_sched.c" |
| 93 | #endif |
| 94 | |
| 95 | #ifdef CONFIG_PSI |
| 96 | # include "psi.c" |
| 97 | #endif |
| 98 | |
| 99 | #ifdef CONFIG_MEMBARRIER |
| 100 | # include "membarrier.c" |
| 101 | #endif |
| 102 | |
| 103 | #ifdef CONFIG_CPU_ISOLATION |
| 104 | # include "isolation.c" |
| 105 | #endif |
| 106 | |
| 107 | #ifdef CONFIG_SCHED_AUTOGROUP |
| 108 | # include "autogroup.c" |
| 109 | #endif |
| 110 |