1//===- BypassSlowDivision.cpp - Bypass slow division ----------------------===//
2//
3// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
4// See https://llvm.org/LICENSE.txt for license information.
5// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
6//
7//===----------------------------------------------------------------------===//
8//
9// This file contains an optimization for div and rem on architectures that
10// execute short instructions significantly faster than longer instructions.
11// For example, on Intel Atom 32-bit divides are slow enough that during
12// runtime it is profitable to check the value of the operands, and if they are
13// positive and less than 256 use an unsigned 8-bit divide.
14//
15//===----------------------------------------------------------------------===//
16
17#include "llvm/Transforms/Utils/BypassSlowDivision.h"
18#include "llvm/ADT/DenseMap.h"
19#include "llvm/ADT/STLExtras.h"
20#include "llvm/ADT/SmallPtrSet.h"
21#include "llvm/Transforms/Utils/Local.h"
22#include "llvm/Analysis/ValueTracking.h"
23#include "llvm/IR/BasicBlock.h"
24#include "llvm/IR/Constants.h"
25#include "llvm/IR/DerivedTypes.h"
26#include "llvm/IR/Function.h"
27#include "llvm/IR/IRBuilder.h"
28#include "llvm/IR/Instruction.h"
29#include "llvm/IR/Instructions.h"
30#include "llvm/IR/Module.h"
31#include "llvm/IR/Type.h"
32#include "llvm/IR/Value.h"
33#include "llvm/Support/Casting.h"
34#include "llvm/Support/KnownBits.h"
35#include <cassert>
36#include <cstdint>
37
38using namespace llvm;
39
40#define DEBUG_TYPE "bypass-slow-division"
41
42namespace {
43
44 struct QuotRemPair {
45 Value *Quotient;
46 Value *Remainder;
47
48 QuotRemPair(Value *InQuotient, Value *InRemainder)
49 : Quotient(InQuotient), Remainder(InRemainder) {}
50 };
51
52 /// A quotient and remainder, plus a BB from which they logically "originate".
53 /// If you use Quotient or Remainder in a Phi node, you should use BB as its
54 /// corresponding predecessor.
55 struct QuotRemWithBB {
56 BasicBlock *BB = nullptr;
57 Value *Quotient = nullptr;
58 Value *Remainder = nullptr;
59 };
60
61using DivCacheTy = DenseMap<DivRemMapKey, QuotRemPair>;
62using BypassWidthsTy = DenseMap<unsigned, unsigned>;
63using VisitedSetTy = SmallPtrSet<Instruction *, 4>;
64
65enum ValueRange {
66 /// Operand definitely fits into BypassType. No runtime checks are needed.
67 VALRNG_KNOWN_SHORT,
68 /// A runtime check is required, as value range is unknown.
69 VALRNG_UNKNOWN,
70 /// Operand is unlikely to fit into BypassType. The bypassing should be
71 /// disabled.
72 VALRNG_LIKELY_LONG
73};
74
75class FastDivInsertionTask {
76 bool IsValidTask = false;
77 Instruction *SlowDivOrRem = nullptr;
78 IntegerType *BypassType = nullptr;
79 BasicBlock *MainBB = nullptr;
80
81 bool isHashLikeValue(Value *V, VisitedSetTy &Visited);
82 ValueRange getValueRange(Value *Op, VisitedSetTy &Visited);
83 QuotRemWithBB createSlowBB(BasicBlock *Successor);
84 QuotRemWithBB createFastBB(BasicBlock *Successor);
85 QuotRemPair createDivRemPhiNodes(QuotRemWithBB &LHS, QuotRemWithBB &RHS,
86 BasicBlock *PhiBB);
87 Value *insertOperandRuntimeCheck(Value *Op1, Value *Op2);
88 std::optional<QuotRemPair> insertFastDivAndRem();
89
90 bool isSignedOp() {
91 return SlowDivOrRem->getOpcode() == Instruction::SDiv ||
92 SlowDivOrRem->getOpcode() == Instruction::SRem;
93 }
94
95 bool isDivisionOp() {
96 return SlowDivOrRem->getOpcode() == Instruction::SDiv ||
97 SlowDivOrRem->getOpcode() == Instruction::UDiv;
98 }
99
100 Type *getSlowType() { return SlowDivOrRem->getType(); }
101
102public:
103 FastDivInsertionTask(Instruction *I, const BypassWidthsTy &BypassWidths);
104
105 Value *getReplacement(DivCacheTy &Cache);
106};
107
108} // end anonymous namespace
109
110FastDivInsertionTask::FastDivInsertionTask(Instruction *I,
111 const BypassWidthsTy &BypassWidths) {
112 switch (I->getOpcode()) {
113 case Instruction::UDiv:
114 case Instruction::SDiv:
115 case Instruction::URem:
116 case Instruction::SRem:
117 SlowDivOrRem = I;
118 break;
119 default:
120 // I is not a div/rem operation.
121 return;
122 }
123
124 // Skip division on vector types. Only optimize integer instructions.
125 IntegerType *SlowType = dyn_cast<IntegerType>(Val: SlowDivOrRem->getType());
126 if (!SlowType)
127 return;
128
129 // Skip if this bitwidth is not bypassed.
130 auto BI = BypassWidths.find(Val: SlowType->getBitWidth());
131 if (BI == BypassWidths.end())
132 return;
133
134 // Get type for div/rem instruction with bypass bitwidth.
135 IntegerType *BT = IntegerType::get(C&: I->getContext(), NumBits: BI->second);
136 BypassType = BT;
137
138 // The original basic block.
139 MainBB = I->getParent();
140
141 // The instruction is indeed a slow div or rem operation.
142 IsValidTask = true;
143}
144
145/// Reuses previously-computed dividend or remainder from the current BB if
146/// operands and operation are identical. Otherwise calls insertFastDivAndRem to
147/// perform the optimization and caches the resulting dividend and remainder.
148/// If no replacement can be generated, nullptr is returned.
149Value *FastDivInsertionTask::getReplacement(DivCacheTy &Cache) {
150 // First, make sure that the task is valid.
151 if (!IsValidTask)
152 return nullptr;
153
154 // Then, look for a value in Cache.
155 Value *Dividend = SlowDivOrRem->getOperand(i: 0);
156 Value *Divisor = SlowDivOrRem->getOperand(i: 1);
157 DivRemMapKey Key(isSignedOp(), Dividend, Divisor);
158 auto CacheI = Cache.find(Val: Key);
159
160 if (CacheI == Cache.end()) {
161 // If previous instance does not exist, try to insert fast div.
162 std::optional<QuotRemPair> OptResult = insertFastDivAndRem();
163 // Bail out if insertFastDivAndRem has failed.
164 if (!OptResult)
165 return nullptr;
166 CacheI = Cache.insert(KV: {Key, *OptResult}).first;
167 }
168
169 QuotRemPair &Value = CacheI->second;
170 return isDivisionOp() ? Value.Quotient : Value.Remainder;
171}
172
173/// Check if a value looks like a hash.
174///
175/// The routine is expected to detect values computed using the most common hash
176/// algorithms. Typically, hash computations end with one of the following
177/// instructions:
178///
179/// 1) MUL with a constant wider than BypassType
180/// 2) XOR instruction
181///
182/// And even if we are wrong and the value is not a hash, it is still quite
183/// unlikely that such values will fit into BypassType.
184///
185/// To detect string hash algorithms like FNV we have to look through PHI-nodes.
186/// It is implemented as a depth-first search for values that look neither long
187/// nor hash-like.
188bool FastDivInsertionTask::isHashLikeValue(Value *V, VisitedSetTy &Visited) {
189 Instruction *I = dyn_cast<Instruction>(Val: V);
190 if (!I)
191 return false;
192
193 switch (I->getOpcode()) {
194 case Instruction::Xor:
195 return true;
196 case Instruction::Mul: {
197 // After Constant Hoisting pass, long constants may be represented as
198 // bitcast instructions. As a result, some constants may look like an
199 // instruction at first, and an additional check is necessary to find out if
200 // an operand is actually a constant.
201 Value *Op1 = I->getOperand(i: 1);
202 ConstantInt *C = dyn_cast<ConstantInt>(Val: Op1);
203 if (!C && isa<BitCastInst>(Val: Op1))
204 C = dyn_cast<ConstantInt>(Val: cast<BitCastInst>(Val: Op1)->getOperand(i_nocapture: 0));
205 return C && C->getValue().getSignificantBits() > BypassType->getBitWidth();
206 }
207 case Instruction::PHI:
208 // Stop IR traversal in case of a crazy input code. This limits recursion
209 // depth.
210 if (Visited.size() >= 16)
211 return false;
212 // Do not visit nodes that have been visited already. We return true because
213 // it means that we couldn't find any value that doesn't look hash-like.
214 if (!Visited.insert(Ptr: I).second)
215 return true;
216 return llvm::all_of(Range: cast<PHINode>(Val: I)->incoming_values(), P: [&](Value *V) {
217 // Ignore undef values as they probably don't affect the division
218 // operands.
219 return getValueRange(Op: V, Visited) == VALRNG_LIKELY_LONG ||
220 isa<UndefValue>(Val: V);
221 });
222 default:
223 return false;
224 }
225}
226
227/// Check if an integer value fits into our bypass type.
228ValueRange FastDivInsertionTask::getValueRange(Value *V,
229 VisitedSetTy &Visited) {
230 unsigned ShortLen = BypassType->getBitWidth();
231 unsigned LongLen = V->getType()->getIntegerBitWidth();
232
233 assert(LongLen > ShortLen && "Value type must be wider than BypassType");
234 unsigned HiBits = LongLen - ShortLen;
235
236 const DataLayout &DL = SlowDivOrRem->getModule()->getDataLayout();
237 KnownBits Known(LongLen);
238
239 computeKnownBits(V, Known, DL);
240
241 if (Known.countMinLeadingZeros() >= HiBits)
242 return VALRNG_KNOWN_SHORT;
243
244 if (Known.countMaxLeadingZeros() < HiBits)
245 return VALRNG_LIKELY_LONG;
246
247 // Long integer divisions are often used in hashtable implementations. It's
248 // not worth bypassing such divisions because hash values are extremely
249 // unlikely to have enough leading zeros. The call below tries to detect
250 // values that are unlikely to fit BypassType (including hashes).
251 if (isHashLikeValue(V, Visited))
252 return VALRNG_LIKELY_LONG;
253
254 return VALRNG_UNKNOWN;
255}
256
257/// Add new basic block for slow div and rem operations and put it before
258/// SuccessorBB.
259QuotRemWithBB FastDivInsertionTask::createSlowBB(BasicBlock *SuccessorBB) {
260 QuotRemWithBB DivRemPair;
261 DivRemPair.BB = BasicBlock::Create(Context&: MainBB->getParent()->getContext(), Name: "",
262 Parent: MainBB->getParent(), InsertBefore: SuccessorBB);
263 IRBuilder<> Builder(DivRemPair.BB, DivRemPair.BB->begin());
264 Builder.SetCurrentDebugLocation(SlowDivOrRem->getDebugLoc());
265
266 Value *Dividend = SlowDivOrRem->getOperand(i: 0);
267 Value *Divisor = SlowDivOrRem->getOperand(i: 1);
268
269 if (isSignedOp()) {
270 DivRemPair.Quotient = Builder.CreateSDiv(LHS: Dividend, RHS: Divisor);
271 DivRemPair.Remainder = Builder.CreateSRem(LHS: Dividend, RHS: Divisor);
272 } else {
273 DivRemPair.Quotient = Builder.CreateUDiv(LHS: Dividend, RHS: Divisor);
274 DivRemPair.Remainder = Builder.CreateURem(LHS: Dividend, RHS: Divisor);
275 }
276
277 Builder.CreateBr(Dest: SuccessorBB);
278 return DivRemPair;
279}
280
281/// Add new basic block for fast div and rem operations and put it before
282/// SuccessorBB.
283QuotRemWithBB FastDivInsertionTask::createFastBB(BasicBlock *SuccessorBB) {
284 QuotRemWithBB DivRemPair;
285 DivRemPair.BB = BasicBlock::Create(Context&: MainBB->getParent()->getContext(), Name: "",
286 Parent: MainBB->getParent(), InsertBefore: SuccessorBB);
287 IRBuilder<> Builder(DivRemPair.BB, DivRemPair.BB->begin());
288 Builder.SetCurrentDebugLocation(SlowDivOrRem->getDebugLoc());
289
290 Value *Dividend = SlowDivOrRem->getOperand(i: 0);
291 Value *Divisor = SlowDivOrRem->getOperand(i: 1);
292 Value *ShortDivisorV =
293 Builder.CreateCast(Op: Instruction::Trunc, V: Divisor, DestTy: BypassType);
294 Value *ShortDividendV =
295 Builder.CreateCast(Op: Instruction::Trunc, V: Dividend, DestTy: BypassType);
296
297 // udiv/urem because this optimization only handles positive numbers.
298 Value *ShortQV = Builder.CreateUDiv(LHS: ShortDividendV, RHS: ShortDivisorV);
299 Value *ShortRV = Builder.CreateURem(LHS: ShortDividendV, RHS: ShortDivisorV);
300 DivRemPair.Quotient =
301 Builder.CreateCast(Op: Instruction::ZExt, V: ShortQV, DestTy: getSlowType());
302 DivRemPair.Remainder =
303 Builder.CreateCast(Op: Instruction::ZExt, V: ShortRV, DestTy: getSlowType());
304 Builder.CreateBr(Dest: SuccessorBB);
305
306 return DivRemPair;
307}
308
309/// Creates Phi nodes for result of Div and Rem.
310QuotRemPair FastDivInsertionTask::createDivRemPhiNodes(QuotRemWithBB &LHS,
311 QuotRemWithBB &RHS,
312 BasicBlock *PhiBB) {
313 IRBuilder<> Builder(PhiBB, PhiBB->begin());
314 Builder.SetCurrentDebugLocation(SlowDivOrRem->getDebugLoc());
315 PHINode *QuoPhi = Builder.CreatePHI(Ty: getSlowType(), NumReservedValues: 2);
316 QuoPhi->addIncoming(V: LHS.Quotient, BB: LHS.BB);
317 QuoPhi->addIncoming(V: RHS.Quotient, BB: RHS.BB);
318 PHINode *RemPhi = Builder.CreatePHI(Ty: getSlowType(), NumReservedValues: 2);
319 RemPhi->addIncoming(V: LHS.Remainder, BB: LHS.BB);
320 RemPhi->addIncoming(V: RHS.Remainder, BB: RHS.BB);
321 return QuotRemPair(QuoPhi, RemPhi);
322}
323
324/// Creates a runtime check to test whether both the divisor and dividend fit
325/// into BypassType. The check is inserted at the end of MainBB. True return
326/// value means that the operands fit. Either of the operands may be NULL if it
327/// doesn't need a runtime check.
328Value *FastDivInsertionTask::insertOperandRuntimeCheck(Value *Op1, Value *Op2) {
329 assert((Op1 || Op2) && "Nothing to check");
330 IRBuilder<> Builder(MainBB, MainBB->end());
331 Builder.SetCurrentDebugLocation(SlowDivOrRem->getDebugLoc());
332
333 Value *OrV;
334 if (Op1 && Op2)
335 OrV = Builder.CreateOr(LHS: Op1, RHS: Op2);
336 else
337 OrV = Op1 ? Op1 : Op2;
338
339 // BitMask is inverted to check if the operands are
340 // larger than the bypass type
341 uint64_t BitMask = ~BypassType->getBitMask();
342 Value *AndV = Builder.CreateAnd(LHS: OrV, RHS: BitMask);
343
344 // Compare operand values
345 Value *ZeroV = ConstantInt::getSigned(Ty: getSlowType(), V: 0);
346 return Builder.CreateICmpEQ(LHS: AndV, RHS: ZeroV);
347}
348
349/// Substitutes the div/rem instruction with code that checks the value of the
350/// operands and uses a shorter-faster div/rem instruction when possible.
351std::optional<QuotRemPair> FastDivInsertionTask::insertFastDivAndRem() {
352 Value *Dividend = SlowDivOrRem->getOperand(i: 0);
353 Value *Divisor = SlowDivOrRem->getOperand(i: 1);
354
355 VisitedSetTy SetL;
356 ValueRange DividendRange = getValueRange(V: Dividend, Visited&: SetL);
357 if (DividendRange == VALRNG_LIKELY_LONG)
358 return std::nullopt;
359
360 VisitedSetTy SetR;
361 ValueRange DivisorRange = getValueRange(V: Divisor, Visited&: SetR);
362 if (DivisorRange == VALRNG_LIKELY_LONG)
363 return std::nullopt;
364
365 bool DividendShort = (DividendRange == VALRNG_KNOWN_SHORT);
366 bool DivisorShort = (DivisorRange == VALRNG_KNOWN_SHORT);
367
368 if (DividendShort && DivisorShort) {
369 // If both operands are known to be short then just replace the long
370 // division with a short one in-place. Since we're not introducing control
371 // flow in this case, narrowing the division is always a win, even if the
372 // divisor is a constant (and will later get replaced by a multiplication).
373
374 IRBuilder<> Builder(SlowDivOrRem);
375 Value *TruncDividend = Builder.CreateTrunc(V: Dividend, DestTy: BypassType);
376 Value *TruncDivisor = Builder.CreateTrunc(V: Divisor, DestTy: BypassType);
377 Value *TruncDiv = Builder.CreateUDiv(LHS: TruncDividend, RHS: TruncDivisor);
378 Value *TruncRem = Builder.CreateURem(LHS: TruncDividend, RHS: TruncDivisor);
379 Value *ExtDiv = Builder.CreateZExt(V: TruncDiv, DestTy: getSlowType());
380 Value *ExtRem = Builder.CreateZExt(V: TruncRem, DestTy: getSlowType());
381 return QuotRemPair(ExtDiv, ExtRem);
382 }
383
384 if (isa<ConstantInt>(Val: Divisor)) {
385 // If the divisor is not a constant, DAGCombiner will convert it to a
386 // multiplication by a magic constant. It isn't clear if it is worth
387 // introducing control flow to get a narrower multiply.
388 return std::nullopt;
389 }
390
391 // After Constant Hoisting pass, long constants may be represented as
392 // bitcast instructions. As a result, some constants may look like an
393 // instruction at first, and an additional check is necessary to find out if
394 // an operand is actually a constant.
395 if (auto *BCI = dyn_cast<BitCastInst>(Val: Divisor))
396 if (BCI->getParent() == SlowDivOrRem->getParent() &&
397 isa<ConstantInt>(Val: BCI->getOperand(i_nocapture: 0)))
398 return std::nullopt;
399
400 IRBuilder<> Builder(MainBB, MainBB->end());
401 Builder.SetCurrentDebugLocation(SlowDivOrRem->getDebugLoc());
402
403 if (DividendShort && !isSignedOp()) {
404 // If the division is unsigned and Dividend is known to be short, then
405 // either
406 // 1) Divisor is less or equal to Dividend, and the result can be computed
407 // with a short division.
408 // 2) Divisor is greater than Dividend. In this case, no division is needed
409 // at all: The quotient is 0 and the remainder is equal to Dividend.
410 //
411 // So instead of checking at runtime whether Divisor fits into BypassType,
412 // we emit a runtime check to differentiate between these two cases. This
413 // lets us entirely avoid a long div.
414
415 // Split the basic block before the div/rem.
416 BasicBlock *SuccessorBB = MainBB->splitBasicBlock(I: SlowDivOrRem);
417 // Remove the unconditional branch from MainBB to SuccessorBB.
418 MainBB->back().eraseFromParent();
419 QuotRemWithBB Long;
420 Long.BB = MainBB;
421 Long.Quotient = ConstantInt::get(Ty: getSlowType(), V: 0);
422 Long.Remainder = Dividend;
423 QuotRemWithBB Fast = createFastBB(SuccessorBB);
424 QuotRemPair Result = createDivRemPhiNodes(LHS&: Fast, RHS&: Long, PhiBB: SuccessorBB);
425 Value *CmpV = Builder.CreateICmpUGE(LHS: Dividend, RHS: Divisor);
426 Builder.CreateCondBr(Cond: CmpV, True: Fast.BB, False: SuccessorBB);
427 return Result;
428 } else {
429 // General case. Create both slow and fast div/rem pairs and choose one of
430 // them at runtime.
431
432 // Split the basic block before the div/rem.
433 BasicBlock *SuccessorBB = MainBB->splitBasicBlock(I: SlowDivOrRem);
434 // Remove the unconditional branch from MainBB to SuccessorBB.
435 MainBB->back().eraseFromParent();
436 QuotRemWithBB Fast = createFastBB(SuccessorBB);
437 QuotRemWithBB Slow = createSlowBB(SuccessorBB);
438 QuotRemPair Result = createDivRemPhiNodes(LHS&: Fast, RHS&: Slow, PhiBB: SuccessorBB);
439 Value *CmpV = insertOperandRuntimeCheck(Op1: DividendShort ? nullptr : Dividend,
440 Op2: DivisorShort ? nullptr : Divisor);
441 Builder.CreateCondBr(Cond: CmpV, True: Fast.BB, False: Slow.BB);
442 return Result;
443 }
444}
445
446/// This optimization identifies DIV/REM instructions in a BB that can be
447/// profitably bypassed and carried out with a shorter, faster divide.
448bool llvm::bypassSlowDivision(BasicBlock *BB,
449 const BypassWidthsTy &BypassWidths) {
450 DivCacheTy PerBBDivCache;
451
452 bool MadeChange = false;
453 Instruction *Next = &*BB->begin();
454 while (Next != nullptr) {
455 // We may add instructions immediately after I, but we want to skip over
456 // them.
457 Instruction *I = Next;
458 Next = Next->getNextNode();
459
460 // Ignore dead code to save time and avoid bugs.
461 if (I->hasNUses(N: 0))
462 continue;
463
464 FastDivInsertionTask Task(I, BypassWidths);
465 if (Value *Replacement = Task.getReplacement(Cache&: PerBBDivCache)) {
466 I->replaceAllUsesWith(V: Replacement);
467 I->eraseFromParent();
468 MadeChange = true;
469 }
470 }
471
472 // Above we eagerly create divs and rems, as pairs, so that we can efficiently
473 // create divrem machine instructions. Now erase any unused divs / rems so we
474 // don't leave extra instructions sitting around.
475 for (auto &KV : PerBBDivCache)
476 for (Value *V : {KV.second.Quotient, KV.second.Remainder})
477 RecursivelyDeleteTriviallyDeadInstructions(V);
478
479 return MadeChange;
480}
481

source code of llvm/lib/Transforms/Utils/BypassSlowDivision.cpp